diff options
Diffstat (limited to 'third_party/rust/neqo-http3/src/connection.rs')
| -rw-r--r-- | third_party/rust/neqo-http3/src/connection.rs | 1589 |
1 files changed, 1589 insertions, 0 deletions
diff --git a/third_party/rust/neqo-http3/src/connection.rs b/third_party/rust/neqo-http3/src/connection.rs new file mode 100644 index 0000000000..bb5b6451c4 --- /dev/null +++ b/third_party/rust/neqo-http3/src/connection.rs @@ -0,0 +1,1589 @@ +// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or +// http://www.apache.org/licenses/LICENSE-2.0> or the MIT license +// <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your +// option. This file may not be copied, modified, or distributed +// except according to those terms. + +#![allow(clippy::module_name_repetitions)] + +use crate::control_stream_local::ControlStreamLocal; +use crate::control_stream_remote::ControlStreamRemote; +use crate::features::extended_connect::{ + webtransport_session::WebTransportSession, + webtransport_streams::{WebTransportRecvStream, WebTransportSendStream}, + ExtendedConnectEvents, ExtendedConnectFeature, ExtendedConnectType, +}; +use crate::frames::HFrame; +use crate::push_controller::PushController; +use crate::qpack_decoder_receiver::DecoderRecvStream; +use crate::qpack_encoder_receiver::EncoderRecvStream; +use crate::recv_message::{RecvMessage, RecvMessageInfo}; +use crate::request_target::{AsRequestTarget, RequestTarget}; +use crate::send_message::SendMessage; +use crate::settings::{HSettingType, HSettings, HttpZeroRttChecker}; +use crate::stream_type_reader::NewStreamHeadReader; +use crate::{ + client_events::Http3ClientEvents, CloseType, Http3Parameters, Http3StreamType, + HttpRecvStreamEvents, NewStreamType, Priority, PriorityHandler, ReceiveOutput, RecvStream, + RecvStreamEvents, SendStream, SendStreamEvents, +}; +use neqo_common::{qdebug, qerror, qinfo, qtrace, qwarn, Decoder, Header, MessageType, Role}; +use neqo_qpack::decoder::QPackDecoder; +use neqo_qpack::encoder::QPackEncoder; +use neqo_transport::{ + AppError, Connection, ConnectionError, DatagramTracking, State, StreamId, StreamType, + ZeroRttState, +}; +use std::cell::RefCell; +use std::collections::{BTreeSet, HashMap}; +use std::fmt::Debug; +use std::mem; +use std::rc::Rc; + +use crate::{Error, Res}; + +pub(crate) struct RequestDescription<'b, 't, T> +where + T: AsRequestTarget<'t> + ?Sized + Debug, +{ + pub method: &'b str, + pub connect_type: Option<ExtendedConnectType>, + pub target: &'t T, + pub headers: &'b [Header], + pub priority: Priority, +} + +pub enum WebTransportSessionAcceptAction { + Accept, + Reject(Vec<Header>), +} + +impl ::std::fmt::Display for WebTransportSessionAcceptAction { + fn fmt(&self, f: &mut ::std::fmt::Formatter) -> ::std::fmt::Result { + match self { + WebTransportSessionAcceptAction::Accept => f.write_str("Accept"), + WebTransportSessionAcceptAction::Reject(_) => f.write_str("Reject"), + } + } +} + +#[derive(Debug)] +enum Http3RemoteSettingsState { + NotReceived, + Received(HSettings), + ZeroRtt(HSettings), +} + +/// States: +/// - `Initializing`: this is the state during the QUIC handshake, +/// - `ZeroRtt`: 0-RTT has been enabled and is active +/// - Connected +/// - GoingAway(StreamId): The connection has received a `GOAWAY` frame +/// - Closing(ConnectionError): The connection is closed. The closing has been initiated by this +/// end of the connection, e.g., the `CONNECTION_CLOSE` frame has been sent. In this state, the +/// connection waits a certain amount of time to retransmit the `CONNECTION_CLOSE` frame if +/// needed. +/// - Closed(ConnectionError): This is the final close state: closing has been initialized by the +/// peer and an ack for the `CONNECTION_CLOSE` frame has been sent or the closing has been +/// initiated by this end of the connection and the ack for the `CONNECTION_CLOSE` has been +/// received or the waiting time has passed. +#[derive(Debug, PartialEq, PartialOrd, Ord, Eq, Clone)] +pub enum Http3State { + Initializing, + ZeroRtt, + Connected, + GoingAway(StreamId), + Closing(ConnectionError), + Closed(ConnectionError), +} + +impl Http3State { + #[must_use] + pub fn active(&self) -> bool { + matches!( + self, + Http3State::Connected | Http3State::GoingAway(_) | Http3State::ZeroRtt + ) + } +} + +/** +# HTTP/3 core implementation + +This is the core implementation of HTTP/3 protocol. It implements most of the features of the +protocol. `Http3Client` and `Http3ServerHandler` implement only client and server side behavior. + +The API consists of: +- functions that correspond to the `Http3Client` and `Http3ServerHandler` API: + - `new` + - `close` + - `fetch` - only used by the client-side implementation + - `read_data` + - `stream_reset_send` + - `stream_stop_sending` + - `cancel_fetch` + - `stream_close_send` +- functions that correspond to [`WebTransport`](https://w3c.github.io/webtransport/) functions: + - `webtransport_create_session` - only used by the client-side implementation + - `webtransport_session_accept` - only used by the server-side implementation + - `webtransport_close_session` + - `webtransport_create_stream_local` - this function is called when an application wants to open + a new `WebTransport` stream. For example `Http3Client::webtransport_create_stream` will call + this function. + - `webtransport_create_stream_remote` - this is called when a `WebTransport` stream has been + opened by the peer and this function sets up the appropriate handler for the stream. +- functions that are called by `process_http3` + - `process_sending` - some send-streams are buffered streams(see the Streams section) and this + function is called to trigger sending of the buffer data. +- functions that are called to handle `ConnectionEvent`s: + - `add_new_stream` + - `handle_stream_readable` + - `handle_stream_reset` + - `handle_stream_stop_sending` + - `handle_state_change` + - `handle_zero_rtt_rejected` +- Additional functions: + - `set_features_listener` + - `stream_has_pending_data` + - `has_data_to_send` + - `add_streams` + - `add_recv_stream` + - `queue_control_frame` + - `queue_update_priority` + - `set_0rtt_settings` + - `get_settings` + - `state` + - `webtransport_enabled` + +## Streams + +Each `Http3Connection` holds a list of stream handlers. Each send and receive-handler is registered in +`send_streams` and `recv_streams`. Unidirectional streams are registered only on one of the lists +and bidirectional streams are registered in both lists and the 2 handlers are independent, e.g. one +can be closed and removed ane second may still be active. + +The only streams that are not registered are the local control stream, local QPACK decoder stream, +and local QPACK encoder stream. These streams are send-streams and sending data on this stream is +handled a bit differently. This is done in the `process_sending` function, i.e. the control data is +sent first and QPACK data is sent after regular stream data is sent because this stream may have +new data only after regular streams are handled (TODO we may improve this a bit to send QPACK +commands before headers.) + +There are the following types of streams: +- `Control`: there is only a receiver stream of this type and the handler is `ControlStreamRemote`. +- `Decoder`: there is only a receiver stream of this type and the handler is `DecoderRecvStream`. +- `Encoder`: there is only a receiver stream of this type and the handler is `EncoderRecvStream`. +- `NewStream`: there is only a receiver stream of this type and the handler is + `NewStreamHeadReader`. +- `Http`: `SendMessage` and `RecvMessage` handlers are responsible for this type of streams. +- `Push`: `RecvMessage` is responsible for this type of streams. +- `ExtendedConnect`: `WebTransportSession` is responsible sender and receiver handler. +- `WebTransport(StreamId)`: `WebTransportSendStream` and `WebTransportRecvStream` are responsible + sender and receiver handler. +- `Unknown`: These are all other stream types that are not unknown to the current implementation + and should be handled properly by the spec, e.g., in our implementation the streams are + reset. + +The streams are registered in `send_streams` and `recv_streams` in following ways depending if they +are local or remote: +- local streams: + - all local stream will be registered with the appropriate handler. +- remote streams: + - all new incoming streams are registered with `NewStreamHeadReader`. This is triggered by + `ConnectionEvent::NewStream` and `add_new_stream` is called. + - reading from a `NewStreamHeadReader` stream, via the `receive` function, will decode a stream + type. `NewStreamHeadReader::receive` will return `ReceiveOutput::NewStream(_)` when a stream + type has been decoded. After this point the stream: + - will be regegistered with the appropriate handler, + - will be canceled if is an unknown stream type or + - the connection will fail if it is unallowed stream type (receiveing HTTP request on the + client-side). + The output is handled in `handle_new_stream`, for control, qpack streams and partially + `WebTransport` streams, otherwise the output is handled by `Http3Client` and `Http3ServerHandler`. + + +### Receiving data + +Reading from a stream is triggered by `ConnectionEvent::RecvStreamReadable` events for the stream. +The receive handler is retrieved from `recv_streams` and its `RecvStream::receive` function is +called. + +Receiving data on `Http` streams is also triggered by the `read_data` function. +`ConnectionEvent::RecvStreamReadable` events will trigger reading `HEADERS` frame and frame headers +for `DATA` frames which will produce `Http3ClientEvent` or `Http3ServerEvent` events. The content of +`DATA` frames is read by the application using the `read_data` function. The `read_data` function +may read frame headers for consecutive `DATA` frames. + +On a `WebTransport(_)` stream data will be read only by the `read_data` function. The +`RecvStream::receive` function only produces an `Http3ClientEvent` or `Http3ServerEvent` event. + +The `receive` and `read_data` functions may detect that the stream is done, e.g. FIN received. In +this case, the stream will be removed from the `recv_stream` register, see `remove_recv_stream`. + +### Sending data + +All sender stream handlers have buffers. Data is first written into a buffer before being supplied +to the QUIC layer. All data except the `DATA` frame and `WebTransport(_)`’s payload are written +into the buffer. This includes stream type byte, e.g. `WEBTRANSPORT_STREAM` as well. In the case of +`Http` and `WebTransport(_)` applications can write directly to the QUIC layer using the +`send_data` function to avoid copying data. Sending data via the `send_data` function is only +possible if there is no buffered data. + +If a stream has buffered data it will be registered in the `streams_with_pending_data` queue and +actual sending will be performed in the `process_sending` function call. (This is done in this way, +i.e. data is buffered first and then sent, for 2 reasons: in this way, sending will happen in a +single function, therefore error handling and clean up is easier and the QUIIC layer may not be +able to accept all data and being able to buffer data is required in any case.) + +The `send` and `send_data` functions may detect that the stream is closed and all outstanding data +has been transferred to the QUIC layer. In this case, the stream will be removed from the +`send_stream` register. + +### `ControlStreamRemote` + +The `ControlStreamRemote` handler uses `FrameReader` to read and decode frames received on the +control frame. The `receive` returns `ReceiveOutput::ControlFrames(_)` with a list of control +frames read (the list may be empty). The control frames are handled by `Http3Connection` and/or by +`Http3Client` and `Http3ServerHandler`. + +### `DecoderRecvStream` and `EncoderRecvStream` + +The `receive` functions of these handlers call corresponding `receive` functions of `QPackDecoder` +and `QPackDecoder`. + +`DecoderRecvStream` returns `ReceiveOutput::UnblockedStreams(_)` that may contain a list of stream +ids that are unblocked by receiving qpack decoder commands. `Http3Connection` will handle this +output by calling `receive` for the listed stream ids. + +`EncoderRecvStream` only returns `ReceiveOutput::NoOutput`. + +Both handlers may return an error that will close the connection. + +### `NewStreamHeadReader` + +A new incoming receiver stream registers a `NewStreamHeadReader` handler. This handler reads the +first bytes of a stream to detect a stream type. The `receive` function returns +`ReceiveOutput::NoOutput` if a stream type is still not known by reading the available stream data +or `ReceiveOutput::NewStream(_)`. The handling of the output is explained above. + +### `SendMessage` and `RecvMessage` + +`RecvMessage::receive` only returns `ReceiveOutput::NoOutput`. It also have an event listener of +type `HttpRecvStreamEvents`. The listener is called when headers are ready, or data is ready, etc. + +For example for `Http` stream the listener will produce `HeaderReady` and `DataReadable` events. + +### `WebTransportSession` + +A `WebTransport` session is connected to a control stream that is in essence an HTTP transaction. +Therefore, `WebTransportSession` will internally use a `SendMessage` and `RecvMessage` handler to +handle parsing and sending of HTTP part of the control stream. When HTTP headers are exchenged, +`WebTransportSession` will take over handling of stream data. `WebTransportSession` sets +`WebTransportSessionListener` as the `RecvMessage` event listener. + +`WebTransportSendStream` and `WebTransportRecvStream` are associated with a `WebTransportSession` +and they will be canceled if the session is closed. To be avle to do this `WebTransportSession` +holds a list of its active streams and clean up is done in `remove_extended_connect`. + +### `WebTransportSendStream` and `WebTransportRecvStream` + +`WebTransport` streams are associated with a session. `WebTransportSendStream` and +`WebTransportRecvStream` hold a reference to the session and are registered in the session upon + creation by `Http3Connection`. The `WebTransportSendStream` and `WebTransportRecvStream` + handlers will be unregistered from the session if they are closed, reset, or canceled. + +The call to function `receive` may produce `Http3ClientEvent::DataReadable`. Actual reading of +data is done in the `read_data` function. +*/ +#[derive(Debug)] +pub(crate) struct Http3Connection { + role: Role, + pub state: Http3State, + local_params: Http3Parameters, + control_stream_local: ControlStreamLocal, + pub qpack_encoder: Rc<RefCell<QPackEncoder>>, + pub qpack_decoder: Rc<RefCell<QPackDecoder>>, + settings_state: Http3RemoteSettingsState, + streams_with_pending_data: BTreeSet<StreamId>, + pub send_streams: HashMap<StreamId, Box<dyn SendStream>>, + pub recv_streams: HashMap<StreamId, Box<dyn RecvStream>>, + webtransport: ExtendedConnectFeature, +} + +impl ::std::fmt::Display for Http3Connection { + fn fmt(&self, f: &mut ::std::fmt::Formatter) -> ::std::fmt::Result { + write!(f, "Http3 connection") + } +} + +impl Http3Connection { + /// Create a new connection. + pub fn new(conn_params: Http3Parameters, role: Role) -> Self { + Self { + state: Http3State::Initializing, + control_stream_local: ControlStreamLocal::new(), + qpack_encoder: Rc::new(RefCell::new(QPackEncoder::new( + conn_params.get_qpack_settings(), + true, + ))), + qpack_decoder: Rc::new(RefCell::new(QPackDecoder::new( + conn_params.get_qpack_settings(), + ))), + webtransport: ExtendedConnectFeature::new( + ExtendedConnectType::WebTransport, + conn_params.get_webtransport(), + ), + local_params: conn_params, + settings_state: Http3RemoteSettingsState::NotReceived, + streams_with_pending_data: BTreeSet::new(), + send_streams: HashMap::new(), + recv_streams: HashMap::new(), + role, + } + } + + /// This function is called when a not default feature needs to be negotiated. This is currently + /// only used for the `WebTransport` feature. The negotiation is done via the `SETTINGS` frame + /// and when the peer's `SETTINGS` frame has been received the listener will be called. + pub fn set_features_listener(&mut self, feature_listener: Http3ClientEvents) { + self.webtransport.set_listener(feature_listener); + } + + /// This function creates and initializes, i.e. send stream type, the control and qpack + /// streams. + fn initialize_http3_connection(&mut self, conn: &mut Connection) -> Res<()> { + qinfo!([self], "Initialize the http3 connection."); + self.control_stream_local.create(conn)?; + + self.send_settings(); + self.create_qpack_streams(conn)?; + Ok(()) + } + + fn send_settings(&mut self) { + qdebug!([self], "Send settings."); + self.control_stream_local.queue_frame(&HFrame::Settings { + settings: HSettings::from(&self.local_params), + }); + self.control_stream_local.queue_frame(&HFrame::Grease); + } + + /// Save settings for adding to the session ticket. + pub(crate) fn save_settings(&self) -> Vec<u8> { + HttpZeroRttChecker::save(&self.local_params) + } + + fn create_qpack_streams(&mut self, conn: &mut Connection) -> Res<()> { + qdebug!([self], "create_qpack_streams."); + self.qpack_encoder + .borrow_mut() + .add_send_stream(conn.stream_create(StreamType::UniDi)?); + self.qpack_decoder + .borrow_mut() + .add_send_stream(conn.stream_create(StreamType::UniDi)?); + Ok(()) + } + + /// Inform a `HttpConnection` that a stream has data to send and that `send` should be called for the stream. + pub fn stream_has_pending_data(&mut self, stream_id: StreamId) { + self.streams_with_pending_data.insert(stream_id); + } + + /// Return true if there is a stream that needs to send data. + pub fn has_data_to_send(&self) -> bool { + !self.streams_with_pending_data.is_empty() + } + + /// This function calls the `send` function for all streams that have data to send. If a stream + /// has data to send it will be added to the `streams_with_pending_data` list. + /// + /// Control and QPACK streams are handled differently and are never added to the list. + fn send_non_control_streams(&mut self, conn: &mut Connection) -> Res<()> { + let to_send = mem::take(&mut self.streams_with_pending_data); + for stream_id in to_send { + let done = if let Some(s) = &mut self.send_streams.get_mut(&stream_id) { + s.send(conn)?; + if s.has_data_to_send() { + self.streams_with_pending_data.insert(stream_id); + } + s.done() + } else { + false + }; + if done { + self.remove_send_stream(stream_id, conn); + } + } + Ok(()) + } + + /// Call `send` for all streams that need to send data. See explanation for the main structure + /// for more details. + pub fn process_sending(&mut self, conn: &mut Connection) -> Res<()> { + // check if control stream has data to send. + self.control_stream_local + .send(conn, &mut self.recv_streams)?; + + self.send_non_control_streams(conn)?; + + self.qpack_decoder.borrow_mut().send(conn)?; + match self.qpack_encoder.borrow_mut().send_encoder_updates(conn) { + Ok(()) + | Err(neqo_qpack::Error::EncoderStreamBlocked | neqo_qpack::Error::DynamicTableFull) => { + } + Err(e) => return Err(Error::QpackError(e)), + } + Ok(()) + } + + /// We have a resumption token which remembers previous settings. Update the setting. + pub fn set_0rtt_settings(&mut self, conn: &mut Connection, settings: HSettings) -> Res<()> { + self.initialize_http3_connection(conn)?; + self.set_qpack_settings(&settings)?; + self.settings_state = Http3RemoteSettingsState::ZeroRtt(settings); + self.state = Http3State::ZeroRtt; + Ok(()) + } + + /// Returns the settings for a connection. This is used for creating a resumption token. + pub fn get_settings(&self) -> Option<HSettings> { + if let Http3RemoteSettingsState::Received(settings) = &self.settings_state { + Some(settings.clone()) + } else { + None + } + } + + /// This is called when a `ConnectionEvent::NewStream` event is received. This register the + /// stream with a `NewStreamHeadReader` handler. + pub fn add_new_stream(&mut self, stream_id: StreamId) { + qtrace!([self], "A new stream: {}.", stream_id); + self.recv_streams.insert( + stream_id, + Box::new(NewStreamHeadReader::new(stream_id, self.role)), + ); + } + + /// The function calls `receive` for a stream. It also deals with the outcome of a read by + /// calling `handle_stream_manipulation_output`. + #[allow(clippy::option_if_let_else)] // False positive as borrow scope isn't lexical here. + fn stream_receive(&mut self, conn: &mut Connection, stream_id: StreamId) -> Res<ReceiveOutput> { + qtrace!([self], "Readable stream {}.", stream_id); + + if let Some(recv_stream) = self.recv_streams.get_mut(&stream_id) { + let res = recv_stream.receive(conn); + return self + .handle_stream_manipulation_output(res, stream_id, conn) + .map(|(output, _)| output); + } + Ok(ReceiveOutput::NoOutput) + } + + fn handle_unblocked_streams( + &mut self, + unblocked_streams: Vec<StreamId>, + conn: &mut Connection, + ) -> Res<()> { + for stream_id in unblocked_streams { + qdebug!([self], "Stream {} is unblocked", stream_id); + if let Some(r) = self.recv_streams.get_mut(&stream_id) { + let res = r + .http_stream() + .ok_or(Error::HttpInternal(10))? + .header_unblocked(conn); + let res = self.handle_stream_manipulation_output(res, stream_id, conn)?; + debug_assert!(matches!(res, (ReceiveOutput::NoOutput, _))); + } + } + Ok(()) + } + + /// This function handles reading from all streams, i.e. control, qpack, request/response + /// stream and unidi stream that are still do not have a type. + /// The function cannot handle: + /// 1) a `Push(_)`, `Htttp` or `WebTransportStream(_)` stream + /// 2) frames `MaxPushId`, `PriorityUpdateRequest`, `PriorityUpdateRequestPush` or `Goaway` + /// must be handled by `Http3Client`/`Server`. + /// The function returns `ReceiveOutput`. + pub fn handle_stream_readable( + &mut self, + conn: &mut Connection, + stream_id: StreamId, + ) -> Res<ReceiveOutput> { + let mut output = self.stream_receive(conn, stream_id)?; + + if let ReceiveOutput::NewStream(stream_type) = output { + output = self.handle_new_stream(conn, stream_type, stream_id)?; + } + + #[allow(clippy::match_same_arms)] // clippy is being stupid here + match output { + ReceiveOutput::UnblockedStreams(unblocked_streams) => { + self.handle_unblocked_streams(unblocked_streams, conn)?; + Ok(ReceiveOutput::NoOutput) + } + ReceiveOutput::ControlFrames(mut control_frames) => { + let mut rest = Vec::new(); + for cf in control_frames.drain(..) { + if let Some(not_handled) = self.handle_control_frame(cf)? { + rest.push(not_handled); + } + } + Ok(ReceiveOutput::ControlFrames(rest)) + } + ReceiveOutput::NewStream( + NewStreamType::Push(_) | NewStreamType::Http | NewStreamType::WebTransportStream(_), + ) => Ok(output), + ReceiveOutput::NewStream(_) => { + unreachable!("NewStream should have been handled already") + } + ReceiveOutput::NoOutput => Ok(output), + } + } + + /// This is called when a RESET frame has been received. + pub fn handle_stream_reset( + &mut self, + stream_id: StreamId, + app_error: AppError, + conn: &mut Connection, + ) -> Res<()> { + qinfo!( + [self], + "Handle a stream reset stream_id={} app_err={}", + stream_id, + app_error + ); + + self.close_recv(stream_id, CloseType::ResetRemote(app_error), conn) + } + + pub fn handle_stream_stop_sending( + &mut self, + stream_id: StreamId, + app_error: AppError, + conn: &mut Connection, + ) -> Res<()> { + qinfo!( + [self], + "Handle stream_stop_sending stream_id={} app_err={}", + stream_id, + app_error + ); + + if self.send_stream_is_critical(stream_id) { + return Err(Error::HttpClosedCriticalStream); + } + + self.close_send(stream_id, CloseType::ResetRemote(app_error), conn); + Ok(()) + } + + /// This is called when `neqo_transport::Connection` state has been change to take proper actions in + /// the HTTP3 layer. + pub fn handle_state_change(&mut self, conn: &mut Connection, state: &State) -> Res<bool> { + qdebug!([self], "Handle state change {:?}", state); + match state { + State::Handshaking => { + if self.role == Role::Server + && conn.zero_rtt_state() == ZeroRttState::AcceptedServer + { + self.state = Http3State::ZeroRtt; + self.initialize_http3_connection(conn)?; + Ok(true) + } else { + Ok(false) + } + } + State::Connected => { + debug_assert!(matches!( + self.state, + Http3State::Initializing | Http3State::ZeroRtt + )); + if self.state == Http3State::Initializing { + self.initialize_http3_connection(conn)?; + } + self.state = Http3State::Connected; + Ok(true) + } + State::Closing { error, .. } | State::Draining { error, .. } => { + if matches!(self.state, Http3State::Closing(_) | Http3State::Closed(_)) { + Ok(false) + } else { + self.state = Http3State::Closing(error.clone()); + Ok(true) + } + } + State::Closed(error) => { + if matches!(self.state, Http3State::Closed(_)) { + Ok(false) + } else { + self.state = Http3State::Closed(error.clone()); + Ok(true) + } + } + _ => Ok(false), + } + } + + /// This is called when 0RTT has been reseted to clear `send_streams`, `recv_streams` and settings. + pub fn handle_zero_rtt_rejected(&mut self) -> Res<()> { + if self.state == Http3State::ZeroRtt { + self.state = Http3State::Initializing; + self.control_stream_local = ControlStreamLocal::new(); + self.qpack_encoder = Rc::new(RefCell::new(QPackEncoder::new( + self.local_params.get_qpack_settings(), + true, + ))); + self.qpack_decoder = Rc::new(RefCell::new(QPackDecoder::new( + self.local_params.get_qpack_settings(), + ))); + self.settings_state = Http3RemoteSettingsState::NotReceived; + self.streams_with_pending_data.clear(); + // TODO: investigate whether this code can automatically retry failed transactions. + self.send_streams.clear(); + self.recv_streams.clear(); + Ok(()) + } else { + debug_assert!(false, "Zero rtt rejected in the wrong state."); + Err(Error::HttpInternal(3)) + } + } + + pub fn handle_datagram(&mut self, datagram: &[u8]) { + let mut decoder = Decoder::new(datagram); + let session = decoder + .decode_varint() + .and_then(|id| self.recv_streams.get_mut(&StreamId::from(id * 4))) + .and_then(|stream| stream.webtransport()); + if let Some(s) = session { + s.borrow_mut().datagram(decoder.decode_remainder().to_vec()); + } + } + + fn check_stream_exists(&self, stream_type: Http3StreamType) -> Res<()> { + if self + .recv_streams + .values() + .any(|c| c.stream_type() == stream_type) + { + Err(Error::HttpStreamCreation) + } else { + Ok(()) + } + } + + /// If the new stream is a control or QPACK stream, this function creates a proper handler + /// and perform a read. + /// if the new stream is a `Push(_)`, `Http` or `WebTransportStream(_)` stream, the function + /// returns `ReceiveOutput::NewStream(_)` and the caller will handle it. + /// If the stream is of a unknown type the stream will be closed. + fn handle_new_stream( + &mut self, + conn: &mut Connection, + stream_type: NewStreamType, + stream_id: StreamId, + ) -> Res<ReceiveOutput> { + match stream_type { + NewStreamType::Control => { + self.check_stream_exists(Http3StreamType::Control)?; + self.recv_streams + .insert(stream_id, Box::new(ControlStreamRemote::new(stream_id))); + } + + NewStreamType::Push(push_id) => { + qinfo!( + [self], + "A new push stream {} push_id:{}.", + stream_id, + push_id + ); + } + NewStreamType::Decoder => { + qinfo!([self], "A new remote qpack encoder stream {}", stream_id); + self.check_stream_exists(Http3StreamType::Decoder)?; + self.recv_streams.insert( + stream_id, + Box::new(DecoderRecvStream::new( + stream_id, + Rc::clone(&self.qpack_decoder), + )), + ); + } + NewStreamType::Encoder => { + qinfo!([self], "A new remote qpack decoder stream {}", stream_id); + self.check_stream_exists(Http3StreamType::Encoder)?; + self.recv_streams.insert( + stream_id, + Box::new(EncoderRecvStream::new( + stream_id, + Rc::clone(&self.qpack_encoder), + )), + ); + } + NewStreamType::Http => { + qinfo!([self], "A new http stream {}.", stream_id); + } + NewStreamType::WebTransportStream(session_id) => { + let session_exists = self + .send_streams + .get(&StreamId::from(session_id)) + .map_or(false, |s| { + s.stream_type() == Http3StreamType::ExtendedConnect + }); + if !session_exists { + conn.stream_stop_sending(stream_id, Error::HttpStreamCreation.code())?; + return Ok(ReceiveOutput::NoOutput); + } + } + NewStreamType::Unknown => { + conn.stream_stop_sending(stream_id, Error::HttpStreamCreation.code())?; + } + }; + + match stream_type { + NewStreamType::Control | NewStreamType::Decoder | NewStreamType::Encoder => { + self.stream_receive(conn, stream_id) + } + NewStreamType::Push(_) | NewStreamType::Http | NewStreamType::WebTransportStream(_) => { + Ok(ReceiveOutput::NewStream(stream_type)) + } + NewStreamType::Unknown => Ok(ReceiveOutput::NoOutput), + } + } + + /// This is called when an application closes the connection. + pub fn close(&mut self, error: AppError) { + qinfo!([self], "Close connection error {:?}.", error); + self.state = Http3State::Closing(ConnectionError::Application(error)); + if (!self.send_streams.is_empty() || !self.recv_streams.is_empty()) && (error == 0) { + qwarn!("close(0) called when streams still active"); + } + self.send_streams.clear(); + self.recv_streams.clear(); + } + + /// This function will not handle the output of the function completely, but only + /// handle the indication that a stream is closed. There are 2 cases: + /// - an error occurred or + /// - the stream is done, i.e. the second value in `output` tuple is true if + /// the stream is done and can be removed from the `recv_streams` + /// How it is handling `output`: + /// - if the stream is done, it removes the stream from `recv_streams` + /// - if the stream is not done and there is no error, return `output` and the caller will + /// handle it. + /// - in case of an error: + /// - if it is only a stream error and the stream is not critical, send `STOP_SENDING` + /// frame, remove the stream from `recv_streams` and inform the listener that the stream + /// has been reset. + /// - otherwise this is a connection error. In this case, propagate the error to the caller + /// that will handle it properly. + fn handle_stream_manipulation_output<U>( + &mut self, + output: Res<(U, bool)>, + stream_id: StreamId, + conn: &mut Connection, + ) -> Res<(U, bool)> + where + U: Default, + { + match &output { + Ok((_, true)) => { + self.remove_recv_stream(stream_id, conn); + } + Ok((_, false)) => {} + Err(e) => { + if e.stream_reset_error() && !self.recv_stream_is_critical(stream_id) { + mem::drop(conn.stream_stop_sending(stream_id, e.code())); + self.close_recv(stream_id, CloseType::LocalError(e.code()), conn)?; + return Ok((U::default(), false)); + } + } + } + output + } + + fn create_fetch_headers<'b, 't, T>(request: &RequestDescription<'b, 't, T>) -> Res<Vec<Header>> + where + T: AsRequestTarget<'t> + ?Sized + Debug, + { + let target = request + .target + .as_request_target() + .map_err(|_| Error::InvalidRequestTarget)?; + + // Transform pseudo-header fields + let mut final_headers = vec![ + Header::new(":method", request.method), + Header::new(":scheme", target.scheme()), + Header::new(":authority", target.authority()), + Header::new(":path", target.path()), + ]; + if let Some(conn_type) = request.connect_type { + final_headers.push(Header::new(":protocol", conn_type.string())); + } + + if let Some(priority_header) = request.priority.header() { + final_headers.push(priority_header); + } + final_headers.extend_from_slice(request.headers); + Ok(final_headers) + } + + pub fn fetch<'b, 't, T>( + &mut self, + conn: &mut Connection, + send_events: Box<dyn SendStreamEvents>, + recv_events: Box<dyn HttpRecvStreamEvents>, + push_handler: Option<Rc<RefCell<PushController>>>, + request: &RequestDescription<'b, 't, T>, + ) -> Res<StreamId> + where + T: AsRequestTarget<'t> + ?Sized + Debug, + { + qinfo!( + [self], + "Fetch method={} target: {:?}", + request.method, + request.target, + ); + let id = self.create_bidi_transport_stream(conn)?; + self.fetch_with_stream(id, conn, send_events, recv_events, push_handler, request)?; + Ok(id) + } + + fn create_bidi_transport_stream(&self, conn: &mut Connection) -> Res<StreamId> { + // Requests cannot be created when a connection is in states: Initializing, GoingAway, Closing and Closed. + match self.state() { + Http3State::GoingAway(..) | Http3State::Closing(..) | Http3State::Closed(..) => { + return Err(Error::AlreadyClosed) + } + Http3State::Initializing => return Err(Error::Unavailable), + _ => {} + } + + let id = conn + .stream_create(StreamType::BiDi) + .map_err(|e| Error::map_stream_create_errors(&e))?; + conn.stream_keep_alive(id, true)?; + Ok(id) + } + + fn fetch_with_stream<'b, 't, T>( + &mut self, + stream_id: StreamId, + conn: &mut Connection, + send_events: Box<dyn SendStreamEvents>, + recv_events: Box<dyn HttpRecvStreamEvents>, + push_handler: Option<Rc<RefCell<PushController>>>, + request: &RequestDescription<'b, 't, T>, + ) -> Res<()> + where + T: AsRequestTarget<'t> + ?Sized + Debug, + { + let final_headers = Http3Connection::create_fetch_headers(request)?; + + let stream_type = if request.connect_type.is_some() { + Http3StreamType::ExtendedConnect + } else { + Http3StreamType::Http + }; + + let mut send_message = SendMessage::new( + MessageType::Request, + stream_type, + stream_id, + self.qpack_encoder.clone(), + send_events, + ); + + send_message + .http_stream() + .unwrap() + .send_headers(&final_headers, conn)?; + + self.add_streams( + stream_id, + Box::new(send_message), + Box::new(RecvMessage::new( + &RecvMessageInfo { + message_type: MessageType::Response, + stream_type, + stream_id, + header_frame_type_read: false, + }, + Rc::clone(&self.qpack_decoder), + recv_events, + push_handler, + PriorityHandler::new(false, request.priority), + )), + ); + + // Call immediately send so that at least headers get sent. This will make Firefox faster, since + // it can send request body immediatly in most cases and does not need to do a complete process loop. + self.send_streams + .get_mut(&stream_id) + .ok_or(Error::InvalidStreamId)? + .send(conn)?; + Ok(()) + } + + /// Stream data are read directly into a buffer supplied as a parameter of this function to avoid copying + /// data. + /// # Errors + /// It returns an error if a stream does not exist or an error happens while reading a stream, e.g. + /// early close, protocol error, etc. + pub fn read_data( + &mut self, + conn: &mut Connection, + stream_id: StreamId, + buf: &mut [u8], + ) -> Res<(usize, bool)> { + qinfo!([self], "read_data from stream {}.", stream_id); + let res = self + .recv_streams + .get_mut(&stream_id) + .ok_or(Error::InvalidStreamId)? + .read_data(conn, buf); + self.handle_stream_manipulation_output(res, stream_id, conn) + } + + /// This is called when an application resets a stream. + /// The application reset will close both sides. + pub fn stream_reset_send( + &mut self, + conn: &mut Connection, + stream_id: StreamId, + error: AppError, + ) -> Res<()> { + qinfo!( + [self], + "Reset sending side of stream {} error={}.", + stream_id, + error + ); + + if self.send_stream_is_critical(stream_id) { + return Err(Error::InvalidStreamId); + } + + self.close_send(stream_id, CloseType::ResetApp(error), conn); + conn.stream_reset_send(stream_id, error)?; + Ok(()) + } + + pub fn stream_stop_sending( + &mut self, + conn: &mut Connection, + stream_id: StreamId, + error: AppError, + ) -> Res<()> { + qinfo!( + [self], + "Send stop sending for stream {} error={}.", + stream_id, + error + ); + if self.recv_stream_is_critical(stream_id) { + return Err(Error::InvalidStreamId); + } + + self.close_recv(stream_id, CloseType::ResetApp(error), conn)?; + + // Stream may be already be closed and we may get an error here, but we do not care. + conn.stream_stop_sending(stream_id, error)?; + Ok(()) + } + + pub fn cancel_fetch( + &mut self, + stream_id: StreamId, + error: AppError, + conn: &mut Connection, + ) -> Res<()> { + qinfo!([self], "cancel_fetch {} error={}.", stream_id, error); + let send_stream = self.send_streams.get(&stream_id); + let recv_stream = self.recv_streams.get(&stream_id); + match (send_stream, recv_stream) { + (None, None) => return Err(Error::InvalidStreamId), + (Some(s), None) => { + if !matches!( + s.stream_type(), + Http3StreamType::Http | Http3StreamType::ExtendedConnect + ) { + return Err(Error::InvalidStreamId); + } + // Stream may be already be closed and we may get an error here, but we do not care. + mem::drop(self.stream_reset_send(conn, stream_id, error)); + } + (None, Some(s)) => { + if !matches!( + s.stream_type(), + Http3StreamType::Http + | Http3StreamType::Push + | Http3StreamType::ExtendedConnect + ) { + return Err(Error::InvalidStreamId); + } + + // Stream may be already be closed and we may get an error here, but we do not care. + mem::drop(self.stream_stop_sending(conn, stream_id, error)); + } + (Some(s), Some(r)) => { + debug_assert_eq!(s.stream_type(), r.stream_type()); + if !matches!( + s.stream_type(), + Http3StreamType::Http | Http3StreamType::ExtendedConnect + ) { + return Err(Error::InvalidStreamId); + } + // Stream may be already be closed and we may get an error here, but we do not care. + mem::drop(self.stream_reset_send(conn, stream_id, error)); + // Stream may be already be closed and we may get an error here, but we do not care. + mem::drop(self.stream_stop_sending(conn, stream_id, error)); + } + } + Ok(()) + } + + /// This is called when an application wants to close the sending side of a stream. + pub fn stream_close_send(&mut self, conn: &mut Connection, stream_id: StreamId) -> Res<()> { + qinfo!([self], "Close the sending side for stream {}.", stream_id); + debug_assert!(self.state.active()); + let send_stream = self + .send_streams + .get_mut(&stream_id) + .ok_or(Error::InvalidStreamId)?; + // The following function may return InvalidStreamId from the transport layer if the stream has been closed + // already. It is ok to ignore it here. + mem::drop(send_stream.close(conn)); + if send_stream.done() { + self.remove_send_stream(stream_id, conn); + } else if send_stream.has_data_to_send() { + self.streams_with_pending_data.insert(stream_id); + } + Ok(()) + } + + pub fn webtransport_create_session<'x, 't: 'x, T>( + &mut self, + conn: &mut Connection, + events: Box<dyn ExtendedConnectEvents>, + target: &'t T, + headers: &'t [Header], + ) -> Res<StreamId> + where + T: AsRequestTarget<'x> + ?Sized + Debug, + { + qinfo!([self], "Create WebTransport"); + if !self.webtransport_enabled() { + return Err(Error::Unavailable); + } + + let id = self.create_bidi_transport_stream(conn)?; + + let extended_conn = Rc::new(RefCell::new(WebTransportSession::new( + id, + events, + self.role, + Rc::clone(&self.qpack_encoder), + Rc::clone(&self.qpack_decoder), + ))); + self.add_streams( + id, + Box::new(extended_conn.clone()), + Box::new(extended_conn.clone()), + ); + + let final_headers = Http3Connection::create_fetch_headers(&RequestDescription { + method: "CONNECT", + target, + headers, + connect_type: Some(ExtendedConnectType::WebTransport), + priority: Priority::default(), + })?; + extended_conn + .borrow_mut() + .send_request(&final_headers, conn)?; + self.streams_with_pending_data.insert(id); + Ok(id) + } + + pub(crate) fn webtransport_session_accept( + &mut self, + conn: &mut Connection, + stream_id: StreamId, + events: Box<dyn ExtendedConnectEvents>, + accept_res: &WebTransportSessionAcceptAction, + ) -> Res<()> { + qtrace!( + "Respond to WebTransport session with accept={}.", + accept_res + ); + if !self.webtransport_enabled() { + return Err(Error::Unavailable); + } + let mut recv_stream = self.recv_streams.get_mut(&stream_id); + if let Some(r) = &mut recv_stream { + if !r + .http_stream() + .ok_or(Error::InvalidStreamId)? + .extended_connect_wait_for_response() + { + return Err(Error::InvalidStreamId); + } + } + + let send_stream = self.send_streams.get_mut(&stream_id); + + match (send_stream, recv_stream, accept_res) { + (None, None, _) => Err(Error::InvalidStreamId), + (None, Some(_), _) | (Some(_), None, _) => { + // TODO this needs a better error + self.cancel_fetch(stream_id, Error::HttpRequestRejected.code(), conn)?; + Err(Error::InvalidStreamId) + } + (Some(s), Some(_r), WebTransportSessionAcceptAction::Reject(headers)) => { + if s.http_stream() + .ok_or(Error::InvalidStreamId)? + .send_headers(headers, conn) + .is_ok() + { + mem::drop(self.stream_close_send(conn, stream_id)); + // TODO issue 1294: add a timer to clean up the recv_stream if the peer does not do that in a short time. + self.streams_with_pending_data.insert(stream_id); + } else { + self.cancel_fetch(stream_id, Error::HttpRequestRejected.code(), conn)?; + } + Ok(()) + } + (Some(s), Some(_r), WebTransportSessionAcceptAction::Accept) => { + if s.http_stream() + .ok_or(Error::InvalidStreamId)? + .send_headers(&[Header::new(":status", "200")], conn) + .is_ok() + { + let extended_conn = + Rc::new(RefCell::new(WebTransportSession::new_with_http_streams( + stream_id, + events, + self.role, + self.recv_streams.remove(&stream_id).unwrap(), + self.send_streams.remove(&stream_id).unwrap(), + ))); + self.add_streams( + stream_id, + Box::new(extended_conn.clone()), + Box::new(extended_conn), + ); + self.streams_with_pending_data.insert(stream_id); + } else { + self.cancel_fetch(stream_id, Error::HttpRequestRejected.code(), conn)?; + return Err(Error::InvalidStreamId); + } + Ok(()) + } + } + } + + pub(crate) fn webtransport_close_session( + &mut self, + conn: &mut Connection, + session_id: StreamId, + error: u32, + message: &str, + ) -> Res<()> { + qtrace!("Clos WebTransport session {:?}", session_id); + let send_stream = self + .send_streams + .get_mut(&session_id) + .ok_or(Error::InvalidStreamId)?; + if send_stream.stream_type() != Http3StreamType::ExtendedConnect { + return Err(Error::InvalidStreamId); + } + + send_stream.close_with_message(conn, error, message)?; + if send_stream.done() { + self.remove_send_stream(session_id, conn); + } else if send_stream.has_data_to_send() { + self.streams_with_pending_data.insert(session_id); + } + Ok(()) + } + + pub fn webtransport_create_stream_local( + &mut self, + conn: &mut Connection, + session_id: StreamId, + stream_type: StreamType, + send_events: Box<dyn SendStreamEvents>, + recv_events: Box<dyn RecvStreamEvents>, + ) -> Res<StreamId> { + qtrace!( + "Create new WebTransport stream session={} type={:?}", + session_id, + stream_type + ); + + let wt = self + .recv_streams + .get(&session_id) + .ok_or(Error::InvalidStreamId)? + .webtransport() + .ok_or(Error::InvalidStreamId)?; + if !wt.borrow().is_active() { + return Err(Error::InvalidStreamId); + } + + let stream_id = conn + .stream_create(stream_type) + .map_err(|e| Error::map_stream_create_errors(&e))?; + + self.webtransport_create_stream_internal( + wt, + stream_id, + session_id, + send_events, + recv_events, + true, + ); + Ok(stream_id) + } + + pub fn webtransport_create_stream_remote( + &mut self, + session_id: StreamId, + stream_id: StreamId, + send_events: Box<dyn SendStreamEvents>, + recv_events: Box<dyn RecvStreamEvents>, + ) -> Res<()> { + qtrace!( + "Create new WebTransport stream session={} stream_id={}", + session_id, + stream_id + ); + + let wt = self + .recv_streams + .get(&session_id) + .ok_or(Error::InvalidStreamId)? + .webtransport() + .ok_or(Error::InvalidStreamId)?; + + self.webtransport_create_stream_internal( + wt, + stream_id, + session_id, + send_events, + recv_events, + false, + ); + Ok(()) + } + + fn webtransport_create_stream_internal( + &mut self, + webtransport_session: Rc<RefCell<WebTransportSession>>, + stream_id: StreamId, + session_id: StreamId, + send_events: Box<dyn SendStreamEvents>, + recv_events: Box<dyn RecvStreamEvents>, + local: bool, + ) { + // TODO conn.stream_keep_alive(stream_id, true)?; + webtransport_session.borrow_mut().add_stream(stream_id); + if stream_id.stream_type() == StreamType::UniDi { + if local { + self.send_streams.insert( + stream_id, + Box::new(WebTransportSendStream::new( + stream_id, + session_id, + send_events, + webtransport_session, + true, + )), + ); + } else { + self.recv_streams.insert( + stream_id, + Box::new(WebTransportRecvStream::new( + stream_id, + session_id, + recv_events, + webtransport_session, + )), + ); + } + } else { + self.add_streams( + stream_id, + Box::new(WebTransportSendStream::new( + stream_id, + session_id, + send_events, + webtransport_session.clone(), + local, + )), + Box::new(WebTransportRecvStream::new( + stream_id, + session_id, + recv_events, + webtransport_session, + )), + ); + } + } + + pub fn webtransport_send_datagram( + &mut self, + session_id: StreamId, + conn: &mut Connection, + buf: &[u8], + id: impl Into<DatagramTracking>, + ) -> Res<()> { + self.recv_streams + .get_mut(&session_id) + .ok_or(Error::InvalidStreamId)? + .webtransport() + .ok_or(Error::InvalidStreamId)? + .borrow_mut() + .send_datagram(conn, buf, id) + } + + /// If the control stream has received frames `MaxPushId`, `Goaway`, `PriorityUpdateRequest` or + /// `PriorityUpdateRequestPush` which handling is specific to the client and server, we must + /// give them to the specific client/server handler. + fn handle_control_frame(&mut self, f: HFrame) -> Res<Option<HFrame>> { + qinfo!([self], "Handle a control frame {:?}", f); + if !matches!(f, HFrame::Settings { .. }) + && !matches!( + self.settings_state, + Http3RemoteSettingsState::Received { .. } + ) + { + return Err(Error::HttpMissingSettings); + } + match f { + HFrame::Settings { settings } => { + self.handle_settings(settings)?; + Ok(None) + } + HFrame::Goaway { .. } + | HFrame::MaxPushId { .. } + | HFrame::CancelPush { .. } + | HFrame::PriorityUpdateRequest { .. } + | HFrame::PriorityUpdatePush { .. } => Ok(Some(f)), + _ => Err(Error::HttpFrameUnexpected), + } + } + + fn set_qpack_settings(&mut self, settings: &HSettings) -> Res<()> { + let mut qpe = self.qpack_encoder.borrow_mut(); + qpe.set_max_capacity(settings.get(HSettingType::MaxTableCapacity))?; + qpe.set_max_blocked_streams(settings.get(HSettingType::BlockedStreams))?; + Ok(()) + } + + fn handle_settings(&mut self, new_settings: HSettings) -> Res<()> { + qinfo!([self], "Handle SETTINGS frame."); + match &self.settings_state { + Http3RemoteSettingsState::NotReceived => { + self.set_qpack_settings(&new_settings)?; + self.webtransport.handle_settings(&new_settings); + self.settings_state = Http3RemoteSettingsState::Received(new_settings); + Ok(()) + } + Http3RemoteSettingsState::ZeroRtt(settings) => { + self.webtransport.handle_settings(&new_settings); + let mut qpack_changed = false; + for st in &[ + HSettingType::MaxHeaderListSize, + HSettingType::MaxTableCapacity, + HSettingType::BlockedStreams, + ] { + let zero_rtt_value = settings.get(*st); + let new_value = new_settings.get(*st); + if zero_rtt_value == new_value { + continue; + } + if zero_rtt_value > new_value { + qerror!( + [self], + "The new({}) and the old value({}) of setting {:?} do not match", + new_value, + zero_rtt_value, + st + ); + return Err(Error::HttpSettings); + } + + match st { + HSettingType::MaxTableCapacity => { + if zero_rtt_value != 0 { + return Err(Error::QpackError(neqo_qpack::Error::DecoderStream)); + } + qpack_changed = true; + } + HSettingType::BlockedStreams => qpack_changed = true, + HSettingType::MaxHeaderListSize + | HSettingType::EnableWebTransport + | HSettingType::EnableH3Datagram => (), + } + } + if qpack_changed { + qdebug!([self], "Settings after zero rtt differ."); + self.set_qpack_settings(&(new_settings))?; + } + self.settings_state = Http3RemoteSettingsState::Received(new_settings); + Ok(()) + } + Http3RemoteSettingsState::Received { .. } => Err(Error::HttpFrameUnexpected), + } + } + + /// Return the current state on `Http3Connection`. + pub fn state(&self) -> Http3State { + self.state.clone() + } + + /// Adds a new send and receive stream. + pub fn add_streams( + &mut self, + stream_id: StreamId, + send_stream: Box<dyn SendStream>, + recv_stream: Box<dyn RecvStream>, + ) { + if send_stream.has_data_to_send() { + self.streams_with_pending_data.insert(stream_id); + } + self.send_streams.insert(stream_id, send_stream); + self.recv_streams.insert(stream_id, recv_stream); + } + + /// Add a new recv stream. This is used for push streams. + pub fn add_recv_stream(&mut self, stream_id: StreamId, recv_stream: Box<dyn RecvStream>) { + self.recv_streams.insert(stream_id, recv_stream); + } + + pub fn queue_control_frame(&mut self, frame: &HFrame) { + self.control_stream_local.queue_frame(frame); + } + + pub fn queue_update_priority(&mut self, stream_id: StreamId, priority: Priority) -> Res<bool> { + let stream = self + .recv_streams + .get_mut(&stream_id) + .ok_or(Error::InvalidStreamId)? + .http_stream() + .ok_or(Error::InvalidStreamId)?; + + if stream.maybe_update_priority(priority) { + self.control_stream_local.queue_update_priority(stream_id); + Ok(true) + } else { + Ok(false) + } + } + + fn recv_stream_is_critical(&self, stream_id: StreamId) -> bool { + if let Some(r) = self.recv_streams.get(&stream_id) { + matches!( + r.stream_type(), + Http3StreamType::Control | Http3StreamType::Encoder | Http3StreamType::Decoder + ) + } else { + false + } + } + + fn send_stream_is_critical(&self, stream_id: StreamId) -> bool { + self.qpack_encoder + .borrow() + .local_stream_id() + .iter() + .chain(self.qpack_decoder.borrow().local_stream_id().iter()) + .chain(self.control_stream_local.stream_id().iter()) + .any(|id| stream_id == *id) + } + + fn close_send(&mut self, stream_id: StreamId, close_type: CloseType, conn: &mut Connection) { + if let Some(mut s) = self.remove_send_stream(stream_id, conn) { + s.handle_stop_sending(close_type); + } + } + + fn close_recv( + &mut self, + stream_id: StreamId, + close_type: CloseType, + conn: &mut Connection, + ) -> Res<()> { + if let Some(mut s) = self.remove_recv_stream(stream_id, conn) { + s.reset(close_type)?; + } + Ok(()) + } + + fn remove_extended_connect( + &mut self, + wt: &Rc<RefCell<WebTransportSession>>, + conn: &mut Connection, + ) { + let (recv, send) = wt.borrow_mut().take_sub_streams(); + + for id in recv { + qtrace!("Remove the extended connect sub receiver stream {}", id); + // Use CloseType::ResetRemote so that an event will be sent. CloseType::LocalError would have + // the same effect. + if let Some(mut s) = self.recv_streams.remove(&id) { + mem::drop(s.reset(CloseType::ResetRemote(Error::HttpRequestCancelled.code()))); + } + mem::drop(conn.stream_stop_sending(id, Error::HttpRequestCancelled.code())); + } + for id in send { + qtrace!("Remove the extended connect sub send stream {}", id); + if let Some(mut s) = self.send_streams.remove(&id) { + s.handle_stop_sending(CloseType::ResetRemote(Error::HttpRequestCancelled.code())); + } + mem::drop(conn.stream_reset_send(id, Error::HttpRequestCancelled.code())); + } + } + + fn remove_recv_stream( + &mut self, + stream_id: StreamId, + conn: &mut Connection, + ) -> Option<Box<dyn RecvStream>> { + let stream = self.recv_streams.remove(&stream_id); + if let Some(ref s) = stream { + if s.stream_type() == Http3StreamType::ExtendedConnect { + self.send_streams.remove(&stream_id).unwrap(); + if let Some(wt) = s.webtransport() { + self.remove_extended_connect(&wt, conn); + } + } + } + stream + } + + fn remove_send_stream( + &mut self, + stream_id: StreamId, + conn: &mut Connection, + ) -> Option<Box<dyn SendStream>> { + let stream = self.send_streams.remove(&stream_id); + if let Some(ref s) = stream { + if s.stream_type() == Http3StreamType::ExtendedConnect { + if let Some(wt) = self.recv_streams.remove(&stream_id).unwrap().webtransport() { + self.remove_extended_connect(&wt, conn); + } + } + } + stream + } + + pub fn webtransport_enabled(&self) -> bool { + self.webtransport.enabled() + } +} |