Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 361 insertions, 0 deletions

diff --git a/chart2/source/controller/dialogs/ChartResourceGroups.cxx b/chart2/source/controller/dialogs/ChartResourceGroups.cxx
new file mode 100644
index 000000000..19534aa1e
--- /dev/null
+++ b/chart2/source/controller/dialogs/ChartResourceGroups.cxx
@@ -0,0 +1,361 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <ChartResourceGroups.hxx>
+#include <ChartResourceGroupDlgs.hxx>
+
+#include <strings.hrc>
+#include <ResId.hxx>
+
+namespace chart
+{
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::chart2;
+
+Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder)
+    : m_xCB_3DLook(pBuilder->weld_check_button("3dlook"))
+    , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme"))
+{
+    m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl));
+    m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl));
+}
+
+void Dim3DLookResourceGroup::showControls(bool bShow)
+{
+    m_xCB_3DLook->set_visible(bShow);
+    m_xLB_Scheme->set_visible(bShow);
+}
+
+void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_3DLook->set_active(rParameter.b3DLook);
+    m_xLB_Scheme->set_sensitive(rParameter.b3DLook);
+
+    // tdf#124295 - select always a 3D scheme
+    switch (rParameter.eThreeDLookScheme)
+    {
+        case ThreeDLookScheme::ThreeDLookScheme_Simple:
+            m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE);
+            break;
+        case ThreeDLookScheme::ThreeDLookScheme_Realistic:
+        case ThreeDLookScheme::ThreeDLookScheme_Unknown:
+            m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC);
+            break;
+    }
+}
+
+void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.b3DLook = m_xCB_3DLook->get_active();
+    // tdf#124295 - select always a 3D scheme
+    switch (m_xLB_Scheme->get_active())
+    {
+        case POS_3DSCHEME_SIMPLE:
+            rParameter.eThreeDLookScheme = ThreeDLookScheme::ThreeDLookScheme_Simple;
+            break;
+        default:
+            rParameter.eThreeDLookScheme = ThreeDLookScheme::ThreeDLookScheme_Realistic;
+    }
+}
+
+IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::Toggleable&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder)
+    : m_xCB_XValueSorting(pBuilder->weld_check_button("sort"))
+{
+    m_xCB_XValueSorting->connect_toggled(
+        LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl));
+}
+
+void SortByXValuesResourceGroup::showControls(bool bShow)
+{
+    m_xCB_XValueSorting->set_visible(bShow);
+}
+
+void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_XValueSorting->set_active(rParameter.bSortByXValues);
+}
+
+void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.bSortByXValues = m_xCB_XValueSorting->get_active();
+}
+
+IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::Toggleable&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder)
+    : m_xCB_Stacked(pBuilder->weld_check_button("stack"))
+    , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop"))
+    , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent"))
+    , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep"))
+{
+    m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl));
+    m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+    m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+    m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+}
+
+void StackingResourceGroup::showControls(bool bShow)
+{
+    m_xCB_Stacked->set_visible(bShow);
+    m_xRB_Stack_Y->set_visible(bShow);
+    m_xRB_Stack_Y_Percent->set_visible(bShow);
+    m_xRB_Stack_Z->set_visible(false);
+}
+
+void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_Stacked->set_active(
+        rParameter.eStackMode != GlobalStackMode_NONE
+        && rParameter.eStackMode
+               != GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used
+    switch (rParameter.eStackMode)
+    {
+        case GlobalStackMode_STACK_Y:
+            m_xRB_Stack_Y->set_active(true);
+            break;
+        case GlobalStackMode_STACK_Y_PERCENT:
+            m_xRB_Stack_Y_Percent->set_active(true);
+            break;
+        case GlobalStackMode_STACK_Z:
+            //todo uncomment this condition if z stacking radio button is really used
+            /*
+            if( rParameter.b3DLook )
+                m_xRB_Stack_Z->set_active(true);
+            else
+            */
+            m_xRB_Stack_Y->set_active(true);
+            break;
+        default:
+            m_xRB_Stack_Y->set_active(true);
+            break;
+    }
+    //dis/enabling
+    m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues);
+    m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues);
+    m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active()
+                                         && !rParameter.bXAxisWithValues);
+    m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook);
+}
+
+void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    if (!m_xCB_Stacked->get_active())
+        rParameter.eStackMode = GlobalStackMode_NONE;
+    else if (m_xRB_Stack_Y->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Y;
+    else if (m_xRB_Stack_Y_Percent->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT;
+    else if (m_xRB_Stack_Z->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Z;
+}
+
+IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::Toggleable&, rRadio, void)
+{
+    //for each radio click there are coming two change events
+    //first uncheck of previous button -> ignore that call
+    //the second call gives the check of the new button
+    if (m_pChangeListener && rRadio.get_active())
+        m_pChangeListener->stateChanged();
+}
+
+IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::Toggleable&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, weld::Window* pParent)
+    : m_pParent(pParent)
+    , m_xFT_LineType(pBuilder->weld_label("linetypeft"))
+    , m_xLB_LineType(pBuilder->weld_combo_box("linetype"))
+    , m_xPB_DetailsDialog(pBuilder->weld_button("properties"))
+{
+    m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl));
+}
+
+SplinePropertiesDialog& SplineResourceGroup::getSplinePropertiesDialog()
+{
+    if (!m_xSplinePropertiesDialog)
+    {
+        m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent));
+    }
+    return *m_xSplinePropertiesDialog;
+}
+
+SteppedPropertiesDialog& SplineResourceGroup::getSteppedPropertiesDialog()
+{
+    if (!m_xSteppedPropertiesDialog)
+    {
+        m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent));
+    }
+    return *m_xSteppedPropertiesDialog;
+}
+
+void SplineResourceGroup::showControls(bool bShow)
+{
+    m_xFT_LineType->set_visible(bShow);
+    m_xLB_LineType->set_visible(bShow);
+    m_xPB_DetailsDialog->set_visible(bShow);
+}
+
+void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_LINES:
+            m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT);
+            m_xPB_DetailsDialog->set_sensitive(false);
+            break;
+        case CurveStyle_CUBIC_SPLINES:
+        case CurveStyle_B_SPLINES:
+            m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
+            m_xPB_DetailsDialog->set_sensitive(true);
+            m_xPB_DetailsDialog->connect_clicked(
+                LINK(this, SplineResourceGroup, SplineDetailsDialogHdl));
+            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
+            getSplinePropertiesDialog().fillControls(rParameter);
+            break;
+        case CurveStyle_STEP_START:
+        case CurveStyle_STEP_END:
+        case CurveStyle_STEP_CENTER_X:
+        case CurveStyle_STEP_CENTER_Y:
+            m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
+            m_xPB_DetailsDialog->set_sensitive(true);
+            m_xPB_DetailsDialog->connect_clicked(
+                LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl));
+            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
+            getSteppedPropertiesDialog().fillControls(rParameter);
+            break;
+        default:
+            m_xLB_LineType->set_active(-1);
+            m_xPB_DetailsDialog->set_sensitive(false);
+    }
+}
+void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    switch (m_xLB_LineType->get_active())
+    {
+        case POS_LINETYPE_SMOOTH:
+            getSplinePropertiesDialog().fillParameter(rParameter, true);
+            break;
+        case POS_LINETYPE_STEPPED:
+            getSteppedPropertiesDialog().fillParameter(rParameter, true);
+            break;
+        default: // includes POS_LINETYPE_STRAIGHT
+            rParameter.eCurveStyle = CurveStyle_LINES;
+            break;
+    }
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void)
+{
+    ChartTypeParameter aOldParameter;
+    getSplinePropertiesDialog().fillParameter(aOldParameter,
+                                              m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH);
+
+    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
+    m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
+    if (getSplinePropertiesDialog().run() == RET_OK)
+    {
+        if (m_pChangeListener)
+            m_pChangeListener->stateChanged();
+    }
+    else
+    {
+        //restore old state:
+        m_xLB_LineType->set_active(iOldLineTypePos);
+        getSplinePropertiesDialog().fillControls(aOldParameter);
+    }
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void)
+{
+    ChartTypeParameter aOldParameter;
+    getSteppedPropertiesDialog().fillParameter(aOldParameter, m_xLB_LineType->get_active()
+                                                                  == POS_LINETYPE_STEPPED);
+
+    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
+    m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
+    if (getSteppedPropertiesDialog().run() == RET_OK)
+    {
+        if (m_pChangeListener)
+            m_pChangeListener->stateChanged();
+    }
+    else
+    {
+        //restore old state:
+        m_xLB_LineType->set_active(iOldLineTypePos);
+        getSteppedPropertiesDialog().fillControls(aOldParameter);
+    }
+}
+
+GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder)
+    : m_aGeometryResources(pBuilder)
+{
+    m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl));
+}
+
+void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.set_visible(bShow); }
+
+void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D);
+    m_aGeometryResources.select(nGeometry3D);
+    m_aGeometryResources.set_sensitive(rParameter.b3DLook);
+}
+
+void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.nGeometry3D = 1;
+    int nSelected = m_aGeometryResources.get_selected_index();
+    if (nSelected != -1)
+        rParameter.nGeometry3D = nSelected;
+}
+
+IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+} //namespace chart
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */