Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 987 insertions, 0 deletions

diff --git a/chart2/source/controller/itemsetwrapper/AxisItemConverter.cxx b/chart2/source/controller/itemsetwrapper/AxisItemConverter.cxx
new file mode 100644
index 000000000..20ad1504f
--- /dev/null
+++ b/chart2/source/controller/itemsetwrapper/AxisItemConverter.cxx
@@ -0,0 +1,987 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <AxisItemConverter.hxx>
+#include <ItemPropertyMap.hxx>
+#include <CharacterPropertyItemConverter.hxx>
+#include <GraphicPropertyItemConverter.hxx>
+#include <chartview/ChartSfxItemIds.hxx>
+#include <chartview/ExplicitScaleValues.hxx>
+#include <chartview/ExplicitValueProvider.hxx>
+#include "SchWhichPairs.hxx"
+#include <ChartModelHelper.hxx>
+#include <ChartModel.hxx>
+#include <Axis.hxx>
+#include <AxisHelper.hxx>
+#include <CommonConverters.hxx>
+#include <ChartType.hxx>
+#include <ChartTypeHelper.hxx>
+#include <Diagram.hxx>
+#include <unonames.hxx>
+#include <BaseCoordinateSystem.hxx>
+#include <memory>
+
+#include <com/sun/star/chart/ChartAxisLabelPosition.hpp>
+#include <com/sun/star/chart/ChartAxisMarkPosition.hpp>
+#include <com/sun/star/chart/ChartAxisPosition.hpp>
+#include <com/sun/star/chart/TimeInterval.hpp>
+#include <com/sun/star/chart2/XAxis.hpp>
+#include <com/sun/star/chart2/AxisOrientation.hpp>
+#include <com/sun/star/chart2/AxisType.hpp>
+
+#include <osl/diagnose.h>
+#include <o3tl/any.hxx>
+#include <svl/eitem.hxx>
+#include <svx/chrtitem.hxx>
+#include <svx/sdangitm.hxx>
+#include <svl/intitem.hxx>
+#include <rtl/math.hxx>
+
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::chart2;
+using ::com::sun::star::uno::Reference;
+using ::com::sun::star::chart::TimeInterval;
+using ::com::sun::star::chart::TimeIncrement;
+
+namespace chart::wrapper {
+
+namespace {
+
+ItemPropertyMapType & lcl_GetAxisPropertyMap()
+{
+    static ItemPropertyMapType aAxisPropertyMap{
+        {SCHATTR_AXIS_SHOWDESCR,     {"DisplayLabels",    0}},
+        {SCHATTR_AXIS_TICKS,         {"MajorTickmarks",   0}},
+        {SCHATTR_AXIS_HELPTICKS,     {"MinorTickmarks",   0}},
+        {SCHATTR_AXIS_LABEL_ORDER,   {"ArrangeOrder",     0}},
+        {SCHATTR_TEXT_STACKED,       {"StackCharacters",  0}},
+        {SCHATTR_AXIS_LABEL_BREAK,   {"TextBreak",        0}},
+        {SCHATTR_AXIS_LABEL_OVERLAP, {"TextOverlap",      0}}};
+    return aAxisPropertyMap;
+};
+
+} // anonymous namespace
+
+AxisItemConverter::AxisItemConverter(
+    const Reference< beans::XPropertySet > & rPropertySet,
+    SfxItemPool& rItemPool,
+    SdrModel& rDrawModel,
+    const rtl::Reference<::chart::ChartModel> & xChartDoc,
+    ::chart::ExplicitScaleData const * pScale /* = NULL */,
+    ::chart::ExplicitIncrementData const * pIncrement /* = NULL */,
+    const awt::Size* pRefSize ) :
+        ItemConverter( rPropertySet, rItemPool ),
+        m_xChartDoc( xChartDoc )
+{
+    if( pScale )
+        m_pExplicitScale.reset( new ::chart::ExplicitScaleData( *pScale ) );
+    if( pIncrement )
+        m_pExplicitIncrement.reset( new ::chart::ExplicitIncrementData( *pIncrement ) );
+
+    m_aConverters.emplace_back( new GraphicPropertyItemConverter(
+                                 rPropertySet, rItemPool, rDrawModel,
+                                 xChartDoc,
+                                 GraphicObjectType::LineProperties ));
+    m_aConverters.emplace_back(
+        new CharacterPropertyItemConverter(rPropertySet, rItemPool, pRefSize, "ReferencePageSize"));
+
+    m_xAxis.set( Reference< chart2::XAxis >( rPropertySet, uno::UNO_QUERY ) );
+    OSL_ASSERT( m_xAxis.is());
+}
+
+AxisItemConverter::~AxisItemConverter()
+{
+}
+
+void AxisItemConverter::FillItemSet( SfxItemSet & rOutItemSet ) const
+{
+    for( const auto& pConv : m_aConverters )
+        pConv->FillItemSet( rOutItemSet );
+
+    // own items
+    ItemConverter::FillItemSet( rOutItemSet );
+}
+
+bool AxisItemConverter::ApplyItemSet( const SfxItemSet & rItemSet )
+{
+    bool bResult = false;
+
+    for( const auto& pConv : m_aConverters )
+        bResult = pConv->ApplyItemSet( rItemSet ) || bResult;
+
+    // own items
+    return ItemConverter::ApplyItemSet( rItemSet ) || bResult;
+}
+
+const WhichRangesContainer& AxisItemConverter::GetWhichPairs() const
+{
+    // must span all used items!
+    return nAxisWhichPairs;
+}
+
+bool AxisItemConverter::GetItemProperty( tWhichIdType nWhichId, tPropertyNameWithMemberId & rOutProperty ) const
+{
+    ItemPropertyMapType & rMap( lcl_GetAxisPropertyMap());
+    ItemPropertyMapType::const_iterator aIt( rMap.find( nWhichId ));
+
+    if( aIt == rMap.end())
+        return false;
+
+    rOutProperty =(*aIt).second;
+
+    return true;
+}
+
+static bool lcl_hasTimeIntervalValue( const uno::Any& rAny )
+{
+    bool bRet = false;
+    TimeInterval aValue;
+    if( rAny >>= aValue )
+        bRet = true;
+    return bRet;
+}
+
+void AxisItemConverter::FillSpecialItem( sal_uInt16 nWhichId, SfxItemSet & rOutItemSet ) const
+{
+    if( !m_xAxis.is() )
+        return;
+
+    const chart2::ScaleData&     rScale( m_xAxis->getScaleData() );
+    const chart2::IncrementData& rIncrement( rScale.IncrementData );
+    const uno::Sequence< chart2::SubIncrement >& rSubIncrements( rScale.IncrementData.SubIncrements );
+    const TimeIncrement& rTimeIncrement( rScale.TimeIncrement );
+    bool bDateAxis = (rScale.AxisType == chart2::AxisType::DATE);
+    if( m_pExplicitScale )
+        bDateAxis = (m_pExplicitScale->AxisType == chart2::AxisType::DATE);
+
+    switch( nWhichId )
+    {
+        case SCHATTR_AXIS_AUTO_MAX:
+                rOutItemSet.Put( SfxBoolItem( nWhichId, !hasDoubleValue(rScale.Maximum) ) );
+            break;
+
+        case SCHATTR_AXIS_MAX:
+            {
+                double fMax = 10.0;
+                if( rScale.Maximum >>= fMax )
+                    rOutItemSet.Put( SvxDoubleItem( fMax, SCHATTR_AXIS_MAX ) );
+                else
+                {
+                    if( m_pExplicitScale )
+                        fMax = m_pExplicitScale->Maximum;
+                    rOutItemSet.Put( SvxDoubleItem( fMax, SCHATTR_AXIS_MAX ) );
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_AUTO_MIN:
+                rOutItemSet.Put( SfxBoolItem( nWhichId, !hasDoubleValue(rScale.Minimum) ) );
+            break;
+
+        case SCHATTR_AXIS_MIN:
+            {
+                double fMin = 0.0;
+                if( rScale.Minimum >>= fMin )
+                    rOutItemSet.Put( SvxDoubleItem( fMin, SCHATTR_AXIS_MIN ) );
+                else if( m_pExplicitScale )
+                    rOutItemSet.Put( SvxDoubleItem( m_pExplicitScale->Minimum, SCHATTR_AXIS_MIN ));
+            }
+            break;
+
+        case SCHATTR_AXIS_LOGARITHM:
+            {
+                bool bValue = AxisHelper::isLogarithmic( rScale.Scaling );
+                rOutItemSet.Put( SfxBoolItem( nWhichId, bValue ));
+            }
+            break;
+
+        case SCHATTR_AXIS_REVERSE:
+                rOutItemSet.Put( SfxBoolItem( nWhichId, (rScale.Orientation == AxisOrientation_REVERSE) ));
+            break;
+
+        // Increment
+        case SCHATTR_AXIS_AUTO_STEP_MAIN:
+            if( bDateAxis )
+                rOutItemSet.Put( SfxBoolItem( nWhichId, !lcl_hasTimeIntervalValue(rTimeIncrement.MajorTimeInterval) ) );
+            else
+                rOutItemSet.Put( SfxBoolItem( nWhichId, !hasDoubleValue(rIncrement.Distance) ) );
+            break;
+
+        case SCHATTR_AXIS_MAIN_TIME_UNIT:
+            {
+                TimeInterval aTimeInterval;
+                if( rTimeIncrement.MajorTimeInterval >>= aTimeInterval )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, aTimeInterval.TimeUnit ) );
+                else if( m_pExplicitIncrement )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, m_pExplicitIncrement->MajorTimeInterval.TimeUnit ) );
+            }
+            break;
+
+        case SCHATTR_AXIS_STEP_MAIN:
+            if( bDateAxis )
+            {
+                TimeInterval aTimeInterval;
+                if( rTimeIncrement.MajorTimeInterval >>= aTimeInterval )
+                    rOutItemSet.Put( SvxDoubleItem(aTimeInterval.Number, SCHATTR_AXIS_STEP_MAIN ));
+                else if( m_pExplicitIncrement )
+                    rOutItemSet.Put( SvxDoubleItem( m_pExplicitIncrement->MajorTimeInterval.Number, SCHATTR_AXIS_STEP_MAIN ));
+            }
+            else
+            {
+                double fDistance = 1.0;
+                if( rIncrement.Distance >>= fDistance )
+                    rOutItemSet.Put( SvxDoubleItem(fDistance, SCHATTR_AXIS_STEP_MAIN ));
+                else if( m_pExplicitIncrement )
+                    rOutItemSet.Put( SvxDoubleItem( m_pExplicitIncrement->Distance, SCHATTR_AXIS_STEP_MAIN ));
+            }
+            break;
+
+        // SubIncrement
+        case SCHATTR_AXIS_AUTO_STEP_HELP:
+            if( bDateAxis )
+                rOutItemSet.Put( SfxBoolItem( nWhichId, !lcl_hasTimeIntervalValue(rTimeIncrement.MinorTimeInterval) ) );
+            else
+                rOutItemSet.Put( SfxBoolItem( nWhichId,
+                    ! ( rSubIncrements.hasElements() && rSubIncrements[0].IntervalCount.hasValue() )));
+            break;
+
+        case SCHATTR_AXIS_HELP_TIME_UNIT:
+            {
+                TimeInterval aTimeInterval;
+                if( rTimeIncrement.MinorTimeInterval >>= aTimeInterval )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, aTimeInterval.TimeUnit ) );
+                else if( m_pExplicitIncrement )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, m_pExplicitIncrement->MinorTimeInterval.TimeUnit ) );
+            }
+            break;
+
+        case SCHATTR_AXIS_STEP_HELP:
+            if( bDateAxis )
+            {
+                TimeInterval aTimeInterval;
+                if( rTimeIncrement.MinorTimeInterval >>= aTimeInterval )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, aTimeInterval.Number ));
+                else if( m_pExplicitIncrement )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, m_pExplicitIncrement->MinorTimeInterval.Number ));
+            }
+            else
+            {
+                if( rSubIncrements.hasElements() && rSubIncrements[0].IntervalCount.hasValue())
+                {
+                    rOutItemSet.Put( SfxInt32Item( nWhichId,
+                            *o3tl::doAccess<sal_Int32>(
+                                rSubIncrements[0].IntervalCount) ));
+                }
+                else
+                {
+                    if( m_pExplicitIncrement && !m_pExplicitIncrement->SubIncrements.empty() )
+                    {
+                        rOutItemSet.Put( SfxInt32Item( nWhichId,
+                                m_pExplicitIncrement->SubIncrements[0].IntervalCount ));
+                    }
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_AUTO_TIME_RESOLUTION:
+            {
+                rOutItemSet.Put( SfxBoolItem( nWhichId,
+                        !rTimeIncrement.TimeResolution.hasValue() ));
+            }
+            break;
+        case SCHATTR_AXIS_TIME_RESOLUTION:
+            {
+                sal_Int32 nTimeResolution=0;
+                if( rTimeIncrement.TimeResolution >>= nTimeResolution )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, nTimeResolution ) );
+                else if( m_pExplicitScale )
+                    rOutItemSet.Put( SfxInt32Item( nWhichId, m_pExplicitScale->TimeResolution ) );
+            }
+            break;
+
+        case SCHATTR_AXIS_AUTO_ORIGIN:
+        {
+            rOutItemSet.Put( SfxBoolItem( nWhichId, ( !hasDoubleValue(rScale.Origin) )));
+        }
+        break;
+
+        case SCHATTR_AXIS_ORIGIN:
+        {
+            double fOrigin = 0.0;
+            if( !(rScale.Origin >>= fOrigin) )
+            {
+                if( m_pExplicitScale )
+                    fOrigin = m_pExplicitScale->Origin;
+            }
+            rOutItemSet.Put( SvxDoubleItem( fOrigin, SCHATTR_AXIS_ORIGIN ));
+        }
+        break;
+
+        case SCHATTR_AXIS_POSITION:
+        {
+            css::chart::ChartAxisPosition eAxisPos( css::chart::ChartAxisPosition_ZERO );
+            GetPropertySet()->getPropertyValue( "CrossoverPosition" ) >>= eAxisPos;
+            rOutItemSet.Put( SfxInt32Item( nWhichId, static_cast<sal_Int32>(eAxisPos) ) );
+        }
+        break;
+
+        case SCHATTR_AXIS_POSITION_VALUE:
+        {
+            double fValue = 0.0;
+            if( GetPropertySet()->getPropertyValue( "CrossoverValue" ) >>= fValue )
+                rOutItemSet.Put( SvxDoubleItem( fValue, SCHATTR_AXIS_POSITION_VALUE ) );
+        }
+        break;
+
+        case SCHATTR_AXIS_CROSSING_MAIN_AXIS_NUMBERFORMAT:
+        {
+            //read only item
+            //necessary tp display the crossing value with an appropriate format
+
+            rtl::Reference< BaseCoordinateSystem > xCooSys( AxisHelper::getCoordinateSystemOfAxis(
+                m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) ) );
+
+            rtl::Reference< Axis > xCrossingMainAxis = AxisHelper::getCrossingMainAxis( m_xAxis, xCooSys );
+
+            sal_Int32 nFormatKey = ExplicitValueProvider::getExplicitNumberFormatKeyForAxis(
+                xCrossingMainAxis, xCooSys, m_xChartDoc);
+
+            rOutItemSet.Put( SfxUInt32Item( nWhichId, nFormatKey ));
+        }
+        break;
+
+        case SCHATTR_AXIS_SHIFTED_CATEGORY_POSITION:
+            rOutItemSet.Put(SfxBoolItem(nWhichId, rScale.ShiftedCategoryPosition));
+        break;
+
+        case SCHATTR_AXIS_LABEL_POSITION:
+        {
+            css::chart::ChartAxisLabelPosition ePos( css::chart::ChartAxisLabelPosition_NEAR_AXIS );
+            GetPropertySet()->getPropertyValue( "LabelPosition" ) >>= ePos;
+            rOutItemSet.Put( SfxInt32Item( nWhichId, static_cast<sal_Int32>(ePos) ) );
+        }
+        break;
+
+        case SCHATTR_AXIS_MARK_POSITION:
+        {
+            css::chart::ChartAxisMarkPosition ePos( css::chart::ChartAxisMarkPosition_AT_LABELS_AND_AXIS );
+            GetPropertySet()->getPropertyValue( "MarkPosition" ) >>= ePos;
+            rOutItemSet.Put( SfxInt32Item( nWhichId, static_cast<sal_Int32>(ePos) ) );
+        }
+        break;
+
+        case SCHATTR_TEXT_DEGREES:
+        {
+            // convert double to int (times 100)
+            double fVal = 0;
+
+            if( GetPropertySet()->getPropertyValue( "TextRotation" ) >>= fVal )
+            {
+                rOutItemSet.Put( SdrAngleItem( SCHATTR_TEXT_DEGREES, Degree100(static_cast< sal_Int32 >(
+                                                   ::rtl::math::round( fVal * 100.0 )) ) ));
+            }
+        }
+        break;
+
+        case SID_ATTR_NUMBERFORMAT_VALUE:
+        {
+            if( m_pExplicitScale )
+            {
+                rtl::Reference< BaseCoordinateSystem > xCooSys(
+                        AxisHelper::getCoordinateSystemOfAxis(
+                              m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) ) );
+
+                sal_Int32 nFormatKey = ExplicitValueProvider::getExplicitNumberFormatKeyForAxis(
+                    m_xAxis, xCooSys, m_xChartDoc);
+
+                rOutItemSet.Put( SfxUInt32Item( nWhichId, nFormatKey ));
+            }
+        }
+        break;
+
+        case SID_ATTR_NUMBERFORMAT_SOURCE:
+        {
+            bool bLinkToSource = true;
+            GetPropertySet()->getPropertyValue(CHART_UNONAME_LINK_TO_SRC_NUMFMT) >>= bLinkToSource;
+            rOutItemSet.Put(SfxBoolItem(nWhichId, bLinkToSource));
+        }
+        break;
+
+        case SCHATTR_AXISTYPE:
+            rOutItemSet.Put( SfxInt32Item( nWhichId, rScale.AxisType ));
+        break;
+
+        case SCHATTR_AXIS_AUTO_DATEAXIS:
+            rOutItemSet.Put( SfxBoolItem( nWhichId, rScale.AutoDateAxis ));
+        break;
+
+        case SCHATTR_AXIS_ALLOW_DATEAXIS:
+        {
+            rtl::Reference< BaseCoordinateSystem > xCooSys(
+                AxisHelper::getCoordinateSystemOfAxis( m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) ) );
+            sal_Int32 nDimensionIndex=0; sal_Int32 nAxisIndex=0;
+            AxisHelper::getIndicesForAxis(m_xAxis, xCooSys, nDimensionIndex, nAxisIndex );
+            bool bChartTypeAllowsDateAxis = ChartTypeHelper::isSupportingDateAxis( AxisHelper::getChartTypeByIndex( xCooSys, 0 ), nDimensionIndex );
+            rOutItemSet.Put( SfxBoolItem( nWhichId, bChartTypeAllowsDateAxis ));
+        }
+        break;
+    }
+}
+
+static bool lcl_isDateAxis( const SfxItemSet & rItemSet )
+{
+    sal_Int32 nAxisType = rItemSet.Get( SCHATTR_AXISTYPE ).GetValue();//css::chart2::AxisType
+    return (nAxisType == chart2::AxisType::DATE);
+}
+
+static bool lcl_isAutoMajor( const SfxItemSet & rItemSet )
+{
+    bool bRet = rItemSet.Get( SCHATTR_AXIS_AUTO_STEP_MAIN ).GetValue();
+    return bRet;
+}
+
+static bool lcl_isAutoMinor( const SfxItemSet & rItemSet )
+{
+    bool bRet = rItemSet.Get( SCHATTR_AXIS_AUTO_STEP_HELP ).GetValue();
+    return bRet;
+}
+
+bool AxisItemConverter::ApplySpecialItem( sal_uInt16 nWhichId, const SfxItemSet & rItemSet )
+{
+    if( !m_xAxis.is() )
+        return false;
+
+    chart2::ScaleData     aScale( m_xAxis->getScaleData() );
+
+    bool bSetScale    = false;
+    bool bChangedOtherwise = false;
+
+    uno::Any aValue;
+
+    switch( nWhichId )
+    {
+        case SCHATTR_AXIS_AUTO_MAX:
+            if( static_cast< const SfxBoolItem & >(rItemSet.Get( nWhichId )).GetValue() )
+            {
+                aScale.Maximum.clear();
+                bSetScale = true;
+            }
+            // else SCHATTR_AXIS_MAX must have some value
+            break;
+
+        case SCHATTR_AXIS_MAX:
+            // only if auto if false
+            if( ! (rItemSet.Get( SCHATTR_AXIS_AUTO_MAX ).GetValue() ))
+            {
+                rItemSet.Get( nWhichId ).QueryValue( aValue );
+
+                if( aScale.Maximum != aValue )
+                {
+                    aScale.Maximum = aValue;
+                    bSetScale = true;
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_AUTO_MIN:
+            if( static_cast< const SfxBoolItem & >(rItemSet.Get( nWhichId )).GetValue() )
+            {
+                aScale.Minimum.clear();
+                bSetScale = true;
+            }
+            // else SCHATTR_AXIS_MIN must have some value
+            break;
+
+        case SCHATTR_AXIS_MIN:
+            // only if auto if false
+            if( ! (rItemSet.Get( SCHATTR_AXIS_AUTO_MIN ).GetValue() ))
+            {
+                rItemSet.Get( nWhichId ).QueryValue( aValue );
+
+                if( aScale.Minimum != aValue )
+                {
+                    aScale.Minimum = aValue;
+                    bSetScale = true;
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_LOGARITHM:
+        {
+            bool bWasLogarithm = AxisHelper::isLogarithmic( aScale.Scaling );
+
+            if( static_cast< const SfxBoolItem & >(rItemSet.Get( nWhichId )).GetValue() )
+            {
+                // logarithm is true
+                if( ! bWasLogarithm )
+                {
+                    aScale.Scaling = AxisHelper::createLogarithmicScaling( 10.0 );
+                    bSetScale = true;
+                }
+            }
+            else
+            {
+                // logarithm is false => linear scaling
+                if( bWasLogarithm )
+                {
+                    aScale.Scaling = AxisHelper::createLinearScaling();
+                    bSetScale = true;
+                }
+            }
+        }
+        break;
+
+        case SCHATTR_AXIS_REVERSE:
+        {
+            bool bWasReverse = ( aScale.Orientation == AxisOrientation_REVERSE );
+            bool bNewReverse = static_cast< const SfxBoolItem & >(
+                     rItemSet.Get( nWhichId )).GetValue();
+            if( bWasReverse != bNewReverse )
+            {
+                aScale.Orientation = bNewReverse ? AxisOrientation_REVERSE : AxisOrientation_MATHEMATICAL;
+                bSetScale = true;
+            }
+        }
+        break;
+
+        // Increment
+        case SCHATTR_AXIS_AUTO_STEP_MAIN:
+            if( lcl_isAutoMajor(rItemSet) )
+            {
+                aScale.IncrementData.Distance.clear();
+                aScale.TimeIncrement.MajorTimeInterval.clear();
+                bSetScale = true;
+            }
+            // else SCHATTR_AXIS_STEP_MAIN must have some value
+            break;
+
+        case SCHATTR_AXIS_MAIN_TIME_UNIT:
+            if( !lcl_isAutoMajor(rItemSet) )
+            {
+                if( rItemSet.Get( nWhichId ).QueryValue( aValue ) )
+                {
+                    TimeInterval aTimeInterval;
+                    aScale.TimeIncrement.MajorTimeInterval >>= aTimeInterval;
+                    aValue >>= aTimeInterval.TimeUnit;
+                    aScale.TimeIncrement.MajorTimeInterval <<= aTimeInterval;
+                    bSetScale = true;
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_STEP_MAIN:
+            // only if auto if false
+            if( !lcl_isAutoMajor(rItemSet) )
+            {
+                rItemSet.Get( nWhichId ).QueryValue( aValue );
+                if( lcl_isDateAxis(rItemSet) )
+                {
+                    double fValue = 1.0;
+                    if( aValue >>= fValue )
+                    {
+                        TimeInterval aTimeInterval;
+                        aScale.TimeIncrement.MajorTimeInterval >>= aTimeInterval;
+                        aTimeInterval.Number = static_cast<sal_Int32>(fValue);
+                        aScale.TimeIncrement.MajorTimeInterval <<= aTimeInterval;
+                        bSetScale = true;
+                    }
+                }
+                else if( aScale.IncrementData.Distance != aValue )
+                {
+                    aScale.IncrementData.Distance = aValue;
+                    bSetScale = true;
+                }
+            }
+            break;
+
+        // SubIncrement
+        case SCHATTR_AXIS_AUTO_STEP_HELP:
+            if( lcl_isAutoMinor(rItemSet) )
+            {
+                if( aScale.IncrementData.SubIncrements.hasElements() &&
+                    aScale.IncrementData.SubIncrements[0].IntervalCount.hasValue() )
+                {
+                        aScale.IncrementData.SubIncrements.getArray()[0].IntervalCount.clear();
+                        bSetScale = true;
+                }
+                if( aScale.TimeIncrement.MinorTimeInterval.hasValue() )
+                {
+                    aScale.TimeIncrement.MinorTimeInterval.clear();
+                    bSetScale = true;
+                }
+            }
+            // else SCHATTR_AXIS_STEP_MAIN must have some value
+            break;
+
+        case SCHATTR_AXIS_HELP_TIME_UNIT:
+            if( !lcl_isAutoMinor(rItemSet) )
+            {
+                if( rItemSet.Get( nWhichId ).QueryValue( aValue ) )
+                {
+                    TimeInterval aTimeInterval;
+                    aScale.TimeIncrement.MinorTimeInterval >>= aTimeInterval;
+                    aValue >>= aTimeInterval.TimeUnit;
+                    aScale.TimeIncrement.MinorTimeInterval <<= aTimeInterval;
+                    bSetScale = true;
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_STEP_HELP:
+            // only if auto is false
+            if( !lcl_isAutoMinor(rItemSet) )
+            {
+                rItemSet.Get( nWhichId ).QueryValue( aValue );
+                if( lcl_isDateAxis(rItemSet) )
+                {
+                    TimeInterval aTimeInterval;
+                    aScale.TimeIncrement.MinorTimeInterval >>= aTimeInterval;
+                    aValue >>= aTimeInterval.Number;
+                    aScale.TimeIncrement.MinorTimeInterval <<= aTimeInterval;
+                    bSetScale = true;
+                }
+                else if( aScale.IncrementData.SubIncrements.hasElements() )
+                {
+                    if( ! aScale.IncrementData.SubIncrements[0].IntervalCount.hasValue() ||
+                        aScale.IncrementData.SubIncrements[0].IntervalCount != aValue )
+                    {
+                        OSL_ASSERT( aValue.getValueTypeClass() == uno::TypeClass_LONG );
+                        aScale.IncrementData.SubIncrements.getArray()[0].IntervalCount = aValue;
+                        bSetScale = true;
+                    }
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_AUTO_TIME_RESOLUTION:
+            if( static_cast< const SfxBoolItem & >( rItemSet.Get( nWhichId )).GetValue() )
+            {
+                aScale.TimeIncrement.TimeResolution.clear();
+                bSetScale = true;
+            }
+            break;
+        case SCHATTR_AXIS_TIME_RESOLUTION:
+            // only if auto is false
+            if( ! ( rItemSet.Get( SCHATTR_AXIS_AUTO_TIME_RESOLUTION ).GetValue() ))
+            {
+                rItemSet.Get( nWhichId ).QueryValue( aValue );
+
+                if( aScale.TimeIncrement.TimeResolution != aValue )
+                {
+                    aScale.TimeIncrement.TimeResolution = aValue;
+                    bSetScale = true;
+                }
+            }
+            break;
+
+        case SCHATTR_AXIS_AUTO_ORIGIN:
+        {
+            if( static_cast< const SfxBoolItem & >(rItemSet.Get( nWhichId )).GetValue() )
+            {
+                aScale.Origin.clear();
+                bSetScale = true;
+            }
+        }
+        break;
+
+        case SCHATTR_AXIS_ORIGIN:
+        {
+            // only if auto is false
+            if( ! (rItemSet.Get( SCHATTR_AXIS_AUTO_ORIGIN ).GetValue() ))
+            {
+                rItemSet.Get( nWhichId ).QueryValue( aValue );
+
+                if( aScale.Origin != aValue )
+                {
+                    aScale.Origin = aValue;
+                    bSetScale = true;
+
+                    if( !AxisHelper::isAxisPositioningEnabled() )
+                    {
+                        //keep old and new settings for axis positioning in sync somehow
+                        rtl::Reference< BaseCoordinateSystem > xCooSys( AxisHelper::getCoordinateSystemOfAxis(
+                            m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) ) );
+
+                        sal_Int32 nDimensionIndex=0;
+                        sal_Int32 nAxisIndex=0;
+                        if( AxisHelper::getIndicesForAxis( m_xAxis, xCooSys, nDimensionIndex, nAxisIndex ) && nAxisIndex==0 )
+                        {
+                            rtl::Reference< Axis > xCrossingMainAxis = AxisHelper::getCrossingMainAxis( m_xAxis, xCooSys );
+                            if( xCrossingMainAxis.is() )
+                            {
+                                double fValue = 0.0;
+                                if( aValue >>= fValue )
+                                {
+                                    xCrossingMainAxis->setPropertyValue( "CrossoverPosition" , uno::Any( css::chart::ChartAxisPosition_VALUE ));
+                                    xCrossingMainAxis->setPropertyValue( "CrossoverValue" , uno::Any( fValue ));
+                                }
+                                else
+                                    xCrossingMainAxis->setPropertyValue( "CrossoverPosition" , uno::Any( css::chart::ChartAxisPosition_START ));
+                            }
+                        }
+                    }
+                }
+            }
+        }
+        break;
+
+        case SCHATTR_AXIS_POSITION:
+        {
+            css::chart::ChartAxisPosition eAxisPos =
+                static_cast<css::chart::ChartAxisPosition>(static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue());
+
+            css::chart::ChartAxisPosition eOldAxisPos( css::chart::ChartAxisPosition_ZERO );
+            bool bPropExisted = ( GetPropertySet()->getPropertyValue( "CrossoverPosition" ) >>= eOldAxisPos );
+
+            if( !bPropExisted || ( eOldAxisPos != eAxisPos ))
+            {
+                GetPropertySet()->setPropertyValue( "CrossoverPosition" , uno::Any( eAxisPos ));
+                bChangedOtherwise = true;
+
+                //move the parallel axes to the other side if necessary
+                if( eAxisPos==css::chart::ChartAxisPosition_START || eAxisPos==css::chart::ChartAxisPosition_END )
+                {
+                    rtl::Reference< Axis > xParallelAxis = AxisHelper::getParallelAxis( m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) );
+                    if( xParallelAxis.is() )
+                    {
+                        css::chart::ChartAxisPosition eOtherPos;
+                        if( xParallelAxis->getPropertyValue( "CrossoverPosition" ) >>= eOtherPos )
+                        {
+                            if( eOtherPos == eAxisPos )
+                            {
+                                css::chart::ChartAxisPosition eOppositePos =
+                                    (eAxisPos==css::chart::ChartAxisPosition_START)
+                                    ? css::chart::ChartAxisPosition_END
+                                    : css::chart::ChartAxisPosition_START;
+                                xParallelAxis->setPropertyValue( "CrossoverPosition" , uno::Any( eOppositePos ));
+                            }
+                        }
+                    }
+                }
+            }
+        }
+        break;
+
+        case SCHATTR_AXIS_POSITION_VALUE:
+        {
+            double fValue = static_cast< const SvxDoubleItem & >( rItemSet.Get( nWhichId )).GetValue();
+
+            double fOldValue = 0.0;
+            bool bPropExisted = ( GetPropertySet()->getPropertyValue( "CrossoverValue" ) >>= fOldValue );
+
+            if( !bPropExisted || ( fOldValue != fValue ))
+            {
+                GetPropertySet()->setPropertyValue( "CrossoverValue" , uno::Any( fValue ));
+                bChangedOtherwise = true;
+
+                //keep old and new settings for axis positioning in sync somehow
+                {
+                    rtl::Reference< BaseCoordinateSystem > xCooSys( AxisHelper::getCoordinateSystemOfAxis(
+                        m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) ) );
+
+                    sal_Int32 nDimensionIndex=0;
+                    sal_Int32 nAxisIndex=0;
+                    if( AxisHelper::getIndicesForAxis( m_xAxis, xCooSys, nDimensionIndex, nAxisIndex ) && nAxisIndex==0 )
+                    {
+                        Reference< chart2::XAxis > xCrossingMainAxis( AxisHelper::getCrossingMainAxis( m_xAxis, xCooSys ) );
+                        if( xCrossingMainAxis.is() )
+                        {
+                            ScaleData aCrossingScale( xCrossingMainAxis->getScaleData() );
+                            aCrossingScale.Origin <<= fValue;
+                            xCrossingMainAxis->setScaleData(aCrossingScale);
+                        }
+                    }
+                }
+            }
+        }
+        break;
+
+        case SCHATTR_AXIS_SHIFTED_CATEGORY_POSITION:
+        {
+            bool bNewValue = static_cast<const SfxBoolItem &> (rItemSet.Get(nWhichId)).GetValue();
+            bool bOldValue = aScale.ShiftedCategoryPosition;
+            if (bOldValue != bNewValue)
+            {
+                aScale.ShiftedCategoryPosition = bNewValue;
+                bSetScale = true;
+            }
+        }
+        break;
+
+        case SCHATTR_AXIS_LABEL_POSITION:
+        {
+            css::chart::ChartAxisLabelPosition ePos =
+                static_cast<css::chart::ChartAxisLabelPosition>(static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue());
+
+            css::chart::ChartAxisLabelPosition eOldPos( css::chart::ChartAxisLabelPosition_NEAR_AXIS );
+            bool bPropExisted = ( GetPropertySet()->getPropertyValue( "LabelPosition" ) >>= eOldPos );
+
+            if( !bPropExisted || ( eOldPos != ePos ))
+            {
+                GetPropertySet()->setPropertyValue( "LabelPosition" , uno::Any( ePos ));
+                bChangedOtherwise = true;
+
+                //move the parallel axes to the other side if necessary
+                if( ePos==css::chart::ChartAxisLabelPosition_OUTSIDE_START || ePos==css::chart::ChartAxisLabelPosition_OUTSIDE_END )
+                {
+                    rtl::Reference< Axis > xParallelAxis = AxisHelper::getParallelAxis( m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) );
+                    if( xParallelAxis.is() )
+                    {
+                        css::chart::ChartAxisLabelPosition eOtherPos;
+                        if( xParallelAxis->getPropertyValue( "LabelPosition" ) >>= eOtherPos )
+                        {
+                            if( eOtherPos == ePos )
+                            {
+                                css::chart::ChartAxisLabelPosition eOppositePos =
+                                    (ePos==css::chart::ChartAxisLabelPosition_OUTSIDE_START)
+                                    ? css::chart::ChartAxisLabelPosition_OUTSIDE_END
+                                    : css::chart::ChartAxisLabelPosition_OUTSIDE_START;
+                                xParallelAxis->setPropertyValue( "LabelPosition" , uno::Any( eOppositePos ));
+                            }
+                        }
+                    }
+                }
+            }
+        }
+        break;
+
+        case SCHATTR_AXIS_MARK_POSITION:
+        {
+            css::chart::ChartAxisMarkPosition ePos =
+                static_cast<css::chart::ChartAxisMarkPosition>(static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue());
+
+            css::chart::ChartAxisMarkPosition eOldPos( css::chart::ChartAxisMarkPosition_AT_LABELS_AND_AXIS );
+            bool bPropExisted = ( GetPropertySet()->getPropertyValue( "MarkPosition" ) >>= eOldPos );
+
+            if( !bPropExisted || ( eOldPos != ePos ))
+            {
+                GetPropertySet()->setPropertyValue( "MarkPosition" , uno::Any( ePos ));
+                bChangedOtherwise = true;
+            }
+        }
+        break;
+
+        case SCHATTR_TEXT_DEGREES:
+        {
+            double fVal = toDegrees(rItemSet.Get(SCHATTR_TEXT_DEGREES).GetValue());
+            double fOldVal = 0.0;
+            bool bPropExisted =
+                ( GetPropertySet()->getPropertyValue( "TextRotation" ) >>= fOldVal );
+
+            if( ! bPropExisted || fOldVal != fVal )
+            {
+                GetPropertySet()->setPropertyValue( "TextRotation" , uno::Any( fVal ));
+                bChangedOtherwise = true;
+            }
+        }
+        break;
+
+        case SID_ATTR_NUMBERFORMAT_VALUE:
+        {
+            if( m_pExplicitScale )
+            {
+                bool bUseSourceFormat =
+                        rItemSet.Get( SID_ATTR_NUMBERFORMAT_SOURCE ).GetValue();
+
+                if( ! bUseSourceFormat )
+                {
+                    sal_Int32 nFmt = static_cast< sal_Int32 >(
+                        static_cast< const SfxUInt32Item & >(
+                            rItemSet.Get( nWhichId )).GetValue());
+
+                    aValue <<= nFmt;
+                    if (GetPropertySet()->getPropertyValue(CHART_UNONAME_NUMFMT) != aValue)
+                    {
+                        GetPropertySet()->setPropertyValue(CHART_UNONAME_NUMFMT , aValue);
+                        bChangedOtherwise = true;
+                    }
+                }
+            }
+        }
+        break;
+
+        case SID_ATTR_NUMBERFORMAT_SOURCE:
+        {
+            bool bUseSourceFormat =
+                static_cast< const SfxBoolItem & >(
+                    rItemSet.Get( nWhichId )).GetValue();
+            GetPropertySet()->setPropertyValue(CHART_UNONAME_LINK_TO_SRC_NUMFMT, uno::Any(bUseSourceFormat));
+
+            bool bNumberFormatIsSet = GetPropertySet()->getPropertyValue(CHART_UNONAME_NUMFMT).hasValue();
+
+            bChangedOtherwise = (bUseSourceFormat == bNumberFormatIsSet);
+            if( bChangedOtherwise )
+            {
+                if( ! bUseSourceFormat )
+                {
+                    SfxItemState aState = rItemSet.GetItemState( SID_ATTR_NUMBERFORMAT_VALUE );
+                    if( aState == SfxItemState::SET )
+                    {
+                        sal_Int32 nFormatKey = static_cast< sal_Int32 >(
+                            rItemSet.Get( SID_ATTR_NUMBERFORMAT_VALUE ).GetValue());
+                        aValue <<= nFormatKey;
+                    }
+                    else
+                    {
+                        rtl::Reference< BaseCoordinateSystem > xCooSys =
+                            AxisHelper::getCoordinateSystemOfAxis(
+                                m_xAxis, ChartModelHelper::findDiagram( m_xChartDoc ) );
+
+                        sal_Int32 nFormatKey = ExplicitValueProvider::getExplicitNumberFormatKeyForAxis(
+                            m_xAxis, xCooSys, m_xChartDoc);
+
+                        aValue <<= nFormatKey;
+                    }
+                }
+                // else set a void Any
+                GetPropertySet()->setPropertyValue(CHART_UNONAME_NUMFMT , aValue);
+            }
+        }
+        break;
+
+        case SCHATTR_AXISTYPE:
+        {
+            sal_Int32 nNewAxisType = static_cast< const SfxInt32Item & >( rItemSet.Get( nWhichId )).GetValue();//css::chart2::AxisType
+            aScale.AxisType = nNewAxisType;
+            bSetScale = true;
+        }
+        break;
+
+        case SCHATTR_AXIS_AUTO_DATEAXIS:
+        {
+            bool bNewValue = static_cast< const SfxBoolItem & >( rItemSet.Get( nWhichId )).GetValue();
+            bool bOldValue = aScale.AutoDateAxis;
+            if( bOldValue != bNewValue )
+            {
+                aScale.AutoDateAxis = bNewValue;
+                bSetScale = true;
+            }
+        }
+        break;
+    }
+
+    if( bSetScale )
+        m_xAxis->setScaleData( aScale );
+
+    return (bSetScale || bChangedOtherwise);
+}
+
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */