Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1206 insertions, 0 deletions

diff --git a/sd/source/core/drawdoc.cxx b/sd/source/core/drawdoc.cxx
new file mode 100644
index 000000000..182ffe7f2
--- /dev/null
+++ b/sd/source/core/drawdoc.cxx
@@ -0,0 +1,1206 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <libxml/xmlwriter.h>
+
+#include "PageListWatcher.hxx"
+#include <com/sun/star/document/PrinterIndependentLayout.hpp>
+#include <com/sun/star/i18n/ScriptType.hpp>
+#include <com/sun/star/beans/XPropertyContainer.hpp>
+#include <com/sun/star/beans/PropertyAttribute.hpp>
+#include <com/sun/star/document/XDocumentProperties.hpp>
+#include <com/sun/star/frame/XModel.hpp>
+#include <editeng/forbiddencharacterstable.hxx>
+
+#include <svl/srchitem.hxx>
+#include <editeng/eeitem.hxx>
+#include <editeng/scriptspaceitem.hxx>
+#include <tools/debug.hxx>
+
+#include <unotools/configmgr.hxx>
+#include <unotools/useroptions.hxx>
+#include <officecfg/Office/Impress.hxx>
+
+#include <sfx2/linkmgr.hxx>
+#include <Outliner.hxx>
+#include <sdmod.hxx>
+#include <editeng/editstat.hxx>
+#include <svx/svdotext.hxx>
+#include <editeng/unolingu.hxx>
+#include <svl/itempool.hxx>
+#include <com/sun/star/lang/XMultiServiceFactory.hpp>
+#include <com/sun/star/beans/XPropertySet.hpp>
+#include <editeng/outlobj.hxx>
+#include <comphelper/getexpandeduri.hxx>
+#include <i18nlangtag/mslangid.hxx>
+#include <i18nlangtag/languagetag.hxx>
+#include <unotools/charclass.hxx>
+#include <comphelper/processfactory.hxx>
+#include <unotools/lingucfg.hxx>
+#include <com/sun/star/uno/Reference.hxx>
+#include <com/sun/star/xml/dom/XDocumentBuilder.hpp>
+#include <com/sun/star/xml/dom/XDocument.hpp>
+#include <com/sun/star/xml/dom/XNodeList.hpp>
+#include <com/sun/star/xml/dom/DocumentBuilder.hpp>
+#include <com/sun/star/uno/XComponentContext.hpp>
+#include <rtl/ustring.hxx>
+
+#include <editeng/outliner.hxx>
+#include <drawdoc.hxx>
+#include <sdpage.hxx>
+#include <strings.hrc>
+#include <glob.hxx>
+#include <stlpool.hxx>
+#include <sdresid.hxx>
+#include <customshowlist.hxx>
+#include <DrawDocShell.hxx>
+#include <GraphicDocShell.hxx>
+#include <sdxfer.hxx>
+#include <optsitem.hxx>
+#include <FrameView.hxx>
+#include <undo/undomanager.hxx>
+#include <sdundogr.hxx>
+#include <undopage.hxx>
+#include <vcl/settings.hxx>
+#include <vcl/svapp.hxx>
+#include <unokywds.hxx>
+
+namespace com::sun::star::linguistic2 { class XHyphenator; }
+namespace com::sun::star::linguistic2 { class XSpellChecker1; }
+
+using namespace ::sd;
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::lang;
+using namespace ::com::sun::star::linguistic2;
+
+using namespace com::sun::star::xml::dom;
+using ::com::sun::star::uno::Reference;
+using ::com::sun::star::lang::XMultiServiceFactory;
+
+
+SdDrawDocument* SdDrawDocument::s_pDocLockedInsertingLinks = nullptr;
+
+PresentationSettings::PresentationSettings()
+:   mbAll( true ),
+    mbEndless( false ),
+    mbCustomShow(false),
+    mbManual( false ),
+    mbMouseVisible( false ),
+    mbMouseAsPen( false ),
+    mbLockedPages( false ),
+    mbAlwaysOnTop( false ),
+    mbFullScreen( true ),
+    mbAnimationAllowed( true ),
+    mnPauseTimeout( 0 ),
+    mbShowPauseLogo( false ),
+    mbStartCustomShow( false )
+{
+}
+
+SdDrawDocument::SdDrawDocument(DocumentType eType, SfxObjectShell* pDrDocSh)
+:   FmFormModel(
+        nullptr,
+        pDrDocSh)
+, mpDocSh(static_cast< ::sd::DrawDocShell*>(pDrDocSh))
+, mpCreatingTransferable( nullptr )
+, mbHasOnlineSpellErrors(false)
+, mbInitialOnlineSpellingEnabled(true)
+, mbNewOrLoadCompleted(false)
+, mbOnlineSpell(false)
+, mbStartWithPresentation( false )
+, mbExitAfterPresenting( false )
+, meLanguage( LANGUAGE_SYSTEM )
+, meLanguageCJK( LANGUAGE_SYSTEM )
+, meLanguageCTL( LANGUAGE_SYSTEM )
+, mePageNumType(SVX_NUM_ARABIC)
+, mbAllocDocSh(false)
+, meDocType(eType)
+, mbEmbedFonts(false)
+, mbEmbedUsedFontsOnly(false)
+, mbEmbedFontScriptLatin(true)
+, mbEmbedFontScriptAsian(true)
+, mbEmbedFontScriptComplex(true)
+, mnImagePreferredDPI(0)
+{
+    mpDrawPageListWatcher.reset(new ImpDrawPageListWatcher(*this));
+    mpMasterPageListWatcher.reset(new ImpMasterPageListWatcher(*this));
+
+    InitLayoutVector();
+    InitObjectVector();
+    SetObjectShell(pDrDocSh);       // for VCDrawModel
+
+    if (mpDocSh)
+    {
+        SetSwapGraphics();
+    }
+
+    // Set measuring unit (of the application) and scale (of SdMod)
+    sal_Int32 nX, nY;
+    SdOptions* pOptions = SD_MOD()->GetSdOptions(meDocType);
+    pOptions->GetScale( nX, nY );
+
+    // Allow UI scale only for draw documents.
+    if( eType == DocumentType::Draw )
+        SetUIUnit( static_cast<FieldUnit>(pOptions->GetMetric()), Fraction( nX, nY ) );  // user-defined
+    else
+        SetUIUnit( static_cast<FieldUnit>(pOptions->GetMetric()), Fraction( 1, 1 ) );    // default
+
+    SetScaleUnit(MapUnit::Map100thMM);
+    SetScaleFraction(Fraction(1, 1));
+    SetDefaultFontHeight(o3tl::convert(24, o3tl::Length::pt, o3tl::Length::mm100));
+
+    m_pItemPool->SetDefaultMetric(MapUnit::Map100thMM);
+    m_pItemPool->FreezeIdRanges();
+    SetTextDefaults();
+
+    // DrawingEngine has to know where it is...
+    FmFormModel::SetStyleSheetPool( new SdStyleSheetPool( GetPool(), this ) );
+
+    // Set StyleSheetPool for DrawOutliner, so text objects can be read correctly.
+    // The link to the StyleRequest handler of the document is set later, in
+    // NewOrLoadCompleted, because only then do all the templates exist.
+    SdrOutliner& rOutliner = GetDrawOutliner();
+    rOutliner.SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
+    SetCalcFieldValueHdl( &rOutliner );
+
+    // set linguistic options
+    if (!utl::ConfigManager::IsFuzzing())
+    {
+        const SvtLinguConfig    aLinguConfig;
+        SvtLinguOptions         aOptions;
+        aLinguConfig.GetOptions( aOptions );
+
+        SetLanguage( MsLangId::resolveSystemLanguageByScriptType(aOptions.nDefaultLanguage,
+            css::i18n::ScriptType::LATIN), EE_CHAR_LANGUAGE );
+        SetLanguage( MsLangId::resolveSystemLanguageByScriptType(aOptions.nDefaultLanguage_CJK,
+            css::i18n::ScriptType::ASIAN), EE_CHAR_LANGUAGE_CJK );
+        SetLanguage( MsLangId::resolveSystemLanguageByScriptType(aOptions.nDefaultLanguage_CTL,
+            css::i18n::ScriptType::COMPLEX), EE_CHAR_LANGUAGE_CTL );
+
+        mbOnlineSpell = aOptions.bIsSpellAuto;
+    }
+
+    LanguageType eRealLanguage = MsLangId::getRealLanguage( meLanguage );
+    mpCharClass.reset(new CharClass( LanguageTag( eRealLanguage) ));
+
+    // If the current application language is a language that uses right-to-left text...
+    LanguageType eRealCTLLanguage = Application::GetSettings().GetLanguageTag().getLanguageType();
+
+    // for korean and japanese languages we have a different default for apply spacing between asian, latin and ctl text
+    if (MsLangId::isKorean(eRealCTLLanguage) || (LANGUAGE_JAPANESE == eRealCTLLanguage))
+    {
+        GetPool().GetSecondaryPool()->SetPoolDefaultItem( SvxScriptSpaceItem( false, EE_PARA_ASIANCJKSPACING ) );
+    }
+
+    // Set DefTab and SpellOptions for the SD module
+    sal_uInt16 nDefTab = pOptions->GetDefTab();
+    SetDefaultTabulator( nDefTab );
+
+    try
+    {
+        Reference< XSpellChecker1 > xSpellChecker( LinguMgr::GetSpellChecker() );
+        if ( xSpellChecker.is() )
+            rOutliner.SetSpeller( xSpellChecker );
+
+        Reference< XHyphenator > xHyphenator( LinguMgr::GetHyphenator() );
+        if( xHyphenator.is() )
+            rOutliner.SetHyphenator( xHyphenator );
+
+        SetForbiddenCharsTable(SvxForbiddenCharactersTable::makeForbiddenCharactersTable(::comphelper::getProcessComponentContext()));
+    }
+    catch(...)
+    {
+        OSL_FAIL("Can't get SpellChecker");
+    }
+
+    rOutliner.SetDefaultLanguage( Application::GetSettings().GetLanguageTag().getLanguageType() );
+
+    if (mpDocSh)
+    {
+        SetLinkManager( new sfx2::LinkManager(mpDocSh) );
+    }
+
+    EEControlBits nCntrl = rOutliner.GetControlWord();
+    nCntrl |= EEControlBits::ALLOWBIGOBJS;
+
+    if (mbOnlineSpell)
+        nCntrl |= EEControlBits::ONLINESPELLING;
+    else
+        nCntrl &= ~EEControlBits::ONLINESPELLING;
+
+    nCntrl &= ~ EEControlBits::ULSPACESUMMATION;
+    if ( meDocType != DocumentType::Impress )
+        SetSummationOfParagraphs( false );
+    else
+    {
+        SetSummationOfParagraphs( pOptions->IsSummationOfParagraphs() );
+        if ( pOptions->IsSummationOfParagraphs() )
+            nCntrl |= EEControlBits::ULSPACESUMMATION;
+    }
+    rOutliner.SetControlWord(nCntrl);
+
+    // Initialize the printer independent layout mode
+    SetPrinterIndependentLayout (pOptions->GetPrinterIndependentLayout());
+
+    // Set the StyleSheetPool for HitTestOutliner.
+    // The link to the StyleRequest handler of the document is set later, in
+    // NewOrLoadCompleted, because only then do all the templates exist.
+    m_pHitTestOutliner->SetStyleSheetPool( static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()) );
+
+    SetCalcFieldValueHdl( m_pHitTestOutliner.get() );
+
+    try
+    {
+        Reference< XSpellChecker1 > xSpellChecker( LinguMgr::GetSpellChecker() );
+        if ( xSpellChecker.is() )
+            m_pHitTestOutliner->SetSpeller( xSpellChecker );
+
+        Reference< XHyphenator > xHyphenator( LinguMgr::GetHyphenator() );
+        if( xHyphenator.is() )
+            m_pHitTestOutliner->SetHyphenator( xHyphenator );
+    }
+    catch(...)
+    {
+        OSL_FAIL("Can't get SpellChecker");
+    }
+
+    m_pHitTestOutliner->SetDefaultLanguage( Application::GetSettings().GetLanguageTag().getLanguageType() );
+
+    EEControlBits nCntrl2 = m_pHitTestOutliner->GetControlWord();
+    nCntrl2 |= EEControlBits::ALLOWBIGOBJS;
+    nCntrl2 &= ~EEControlBits::ONLINESPELLING;
+
+    nCntrl2 &= ~ EEControlBits::ULSPACESUMMATION;
+    if ( pOptions->IsSummationOfParagraphs() )
+        nCntrl2 |= EEControlBits::ULSPACESUMMATION;
+
+    m_pHitTestOutliner->SetControlWord( nCntrl2 );
+
+    /** Create layers
+      *
+      * We create the following default layers on all pages and master pages:
+      *
+      * sUNO_LayerName_layout; "layout": default layer for drawing objects of normal pages
+      * localized by SdResId(STR_LAYER_LAYOUT)
+      *
+      * sUNO_LayerName_background; "background": background of the master page
+      * localized by SdResId(STR_LAYER_BCKGRND)
+      *           (currently unused within normal pages and not visible to users)
+      *
+      * sUNO_LayerName_background_objects; "backgroundobjects": objects on the background of master pages
+      * localized by SdResId(STR_LAYER_BCKGRNDOBJ)
+      *           (currently unused within normal pages)
+      *
+      * sUNO_LayerName_controls; "controls": default layer for controls
+      * localized by SdResId(STR_LAYER_CONTROLS)
+      *           (currently special handling in regard to z-order)
+      *
+      * sUNO_LayerName_measurelines; "measurelines" : default layer for measure lines
+      * localized by SdResId(STR_LAYER_MEASURELINES)
+      */
+
+    {
+        SdrLayerAdmin& rLayerAdmin = GetLayerAdmin();
+        rLayerAdmin.NewLayer( sUNO_LayerName_layout );
+        rLayerAdmin.NewLayer( sUNO_LayerName_background );
+        rLayerAdmin.NewLayer( sUNO_LayerName_background_objects );
+        rLayerAdmin.NewLayer( sUNO_LayerName_controls);
+        rLayerAdmin.NewLayer( sUNO_LayerName_measurelines );
+
+        rLayerAdmin.SetControlLayerName(sUNO_LayerName_controls);
+    }
+
+}
+
+// Destructor
+SdDrawDocument::~SdDrawDocument()
+{
+    Broadcast(SdrHint(SdrHintKind::ModelCleared));
+
+    if (mpWorkStartupTimer)
+    {
+        if ( mpWorkStartupTimer->IsActive() )
+            mpWorkStartupTimer->Stop();
+
+        mpWorkStartupTimer.reset();
+    }
+
+    StopOnlineSpelling();
+    mpOnlineSearchItem.reset();
+
+    CloseBookmarkDoc();
+    SetAllocDocSh(false);
+
+    ClearModel(true);
+
+    if (m_pLinkManager)
+    {
+        // Release BaseLinks
+        if ( !m_pLinkManager->GetLinks().empty() )
+        {
+            m_pLinkManager->Remove( 0, m_pLinkManager->GetLinks().size() );
+        }
+
+        delete m_pLinkManager;
+        m_pLinkManager = nullptr;
+    }
+
+    maFrameViewList.clear();
+    mpCustomShowList.reset();
+    mpOutliner.reset();
+    mpInternalOutliner.reset();
+    mpCharClass.reset();
+}
+
+void SdDrawDocument::adaptSizeAndBorderForAllPages(
+    const Size& rNewSize,
+    ::tools::Long nLeft,
+    ::tools::Long nRight,
+    ::tools::Long nUpper,
+    ::tools::Long nLower)
+{
+    const sal_uInt16 nMasterPageCnt(GetMasterSdPageCount(PageKind::Standard));
+    const sal_uInt16 nPageCnt(GetSdPageCount(PageKind::Standard));
+
+    if(0 == nMasterPageCnt && 0 == nPageCnt)
+    {
+        return;
+    }
+
+    SdPage* pPage(0 != nPageCnt ? GetSdPage(0, PageKind::Standard) : GetMasterSdPage(0, PageKind::Standard));
+
+    // call fully implemented local version, including getting
+    // some more information from one of the Pages (1st one)
+    AdaptPageSizeForAllPages(
+        rNewSize,
+        PageKind::Standard,
+        nullptr,
+        nLeft,
+        nRight,
+        nUpper,
+        nLower,
+        true,
+        pPage->GetOrientation(),
+        pPage->GetPaperBin(),
+        pPage->IsBackgroundFullSize());
+
+    // adjust handout page to new format of the standard page
+    if(0 != nPageCnt)
+    {
+        GetSdPage(0, PageKind::Handout)->CreateTitleAndLayout(true);
+    }
+}
+
+void SdDrawDocument::AdaptPageSizeForAllPages(
+    const Size& rNewSize,
+    PageKind ePageKind,
+    SdUndoGroup* pUndoGroup,
+    ::tools::Long nLeft,
+    ::tools::Long nRight,
+    ::tools::Long nUpper,
+    ::tools::Long nLower,
+    bool bScaleAll,
+    Orientation eOrientation,
+    sal_uInt16 nPaperBin,
+    bool bBackgroundFullSize)
+{
+    sal_uInt16 i;
+    const sal_uInt16 nMasterPageCnt(GetMasterSdPageCount(ePageKind));
+    const sal_uInt16 nPageCnt(GetSdPageCount(ePageKind));
+
+    if(0 == nMasterPageCnt && 0 == nPageCnt)
+    {
+        return;
+    }
+
+    for (i = 0; i < nMasterPageCnt; i++)
+    {
+        // first, handle all master pages
+        SdPage* pPage(GetMasterSdPage(i, ePageKind));
+
+        if(pUndoGroup)
+        {
+            SdUndoAction* pUndo(
+                new SdPageFormatUndoAction(
+                    this,
+                    pPage,
+                    pPage->GetSize(),
+                    pPage->GetLeftBorder(), pPage->GetRightBorder(),
+                    pPage->GetUpperBorder(), pPage->GetLowerBorder(),
+                    pPage->GetOrientation(),
+                    pPage->GetPaperBin(),
+                    pPage->IsBackgroundFullSize(),
+                    rNewSize,
+                    nLeft, nRight,
+                    nUpper, nLower,
+                    bScaleAll,
+                    eOrientation,
+                    nPaperBin,
+                    bBackgroundFullSize));
+            pUndoGroup->AddAction(pUndo);
+        }
+
+        if (rNewSize.Width() > 0 || nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0)
+        {
+            ::tools::Rectangle aNewBorderRect(nLeft, nUpper, nRight, nLower);
+            pPage->ScaleObjects(rNewSize, aNewBorderRect, bScaleAll);
+
+            if (rNewSize.Width() > 0)
+            {
+                pPage->SetSize(rNewSize);
+            }
+        }
+
+        if( nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0 )
+        {
+            pPage->SetBorder(nLeft, nUpper, nRight, nLower);
+        }
+
+        pPage->SetOrientation(eOrientation);
+        pPage->SetPaperBin( nPaperBin );
+        pPage->SetBackgroundFullSize( bBackgroundFullSize );
+
+        if ( ePageKind == PageKind::Standard )
+        {
+            GetMasterSdPage(i, PageKind::Notes)->CreateTitleAndLayout();
+        }
+
+        pPage->CreateTitleAndLayout();
+    }
+
+    for (i = 0; i < nPageCnt; i++)
+    {
+        // then, handle all pages
+        SdPage* pPage(GetSdPage(i, ePageKind));
+
+        if(pUndoGroup)
+        {
+            SdUndoAction* pUndo(
+                new SdPageFormatUndoAction(
+                    this,
+                    pPage,
+                    pPage->GetSize(),
+                    pPage->GetLeftBorder(), pPage->GetRightBorder(),
+                    pPage->GetUpperBorder(), pPage->GetLowerBorder(),
+                    pPage->GetOrientation(),
+                    pPage->GetPaperBin(),
+                    pPage->IsBackgroundFullSize(),
+                    rNewSize,
+                    nLeft, nRight,
+                    nUpper, nLower,
+                    bScaleAll,
+                    eOrientation,
+                    nPaperBin,
+                    bBackgroundFullSize));
+            pUndoGroup->AddAction(pUndo);
+        }
+
+        if (rNewSize.Width() > 0 || nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0)
+        {
+            ::tools::Rectangle aNewBorderRect(nLeft, nUpper, nRight, nLower);
+            pPage->ScaleObjects(rNewSize, aNewBorderRect, bScaleAll);
+
+            if (rNewSize.Width() > 0)
+            {
+                pPage->SetSize(rNewSize);
+            }
+        }
+
+        if( nLeft  >= 0 || nRight >= 0 || nUpper >= 0 || nLower >= 0 )
+        {
+            pPage->SetBorder(nLeft, nUpper, nRight, nLower);
+        }
+
+        pPage->SetOrientation(eOrientation);
+        pPage->SetPaperBin( nPaperBin );
+        pPage->SetBackgroundFullSize( bBackgroundFullSize );
+
+        if ( ePageKind == PageKind::Standard )
+        {
+            SdPage* pNotesPage = GetSdPage(i, PageKind::Notes);
+            pNotesPage->SetAutoLayout( pNotesPage->GetAutoLayout() );
+        }
+
+        pPage->SetAutoLayout( pPage->GetAutoLayout() );
+    }
+}
+
+SdrModel* SdDrawDocument::AllocModel() const
+{
+    return AllocSdDrawDocument();
+}
+
+namespace
+{
+
+/// Copies all user-defined properties from pSource to pDestination.
+void lcl_copyUserDefinedProperties(const SfxObjectShell* pSource, const SfxObjectShell* pDestination)
+{
+    if (!pSource || !pDestination)
+        return;
+
+    uno::Reference<document::XDocumentProperties> xSource = pSource->getDocProperties();
+    uno::Reference<document::XDocumentProperties> xDestination = pDestination->getDocProperties();
+    uno::Reference<beans::XPropertyContainer> xSourcePropertyContainer = xSource->getUserDefinedProperties();
+    uno::Reference<beans::XPropertyContainer> xDestinationPropertyContainer = xDestination->getUserDefinedProperties();
+    uno::Reference<beans::XPropertySet> xSourcePropertySet(xSourcePropertyContainer, uno::UNO_QUERY);
+    const uno::Sequence<beans::Property> aProperties = xSourcePropertySet->getPropertySetInfo()->getProperties();
+
+    for (const beans::Property& rProperty : aProperties)
+    {
+        const OUString& rKey = rProperty.Name;
+        uno::Any aValue = xSourcePropertySet->getPropertyValue(rKey);
+        // We know that pDestination was just created, so has no properties: addProperty() will never throw.
+        xDestinationPropertyContainer->addProperty(rKey, beans::PropertyAttribute::REMOVABLE, aValue);
+    }
+}
+
+}
+
+// This method creates a new document (SdDrawDocument) and returns a pointer to
+// said document. The drawing engine uses this method to put the document (or
+// parts of it) into the clipboard/DragServer.
+SdDrawDocument* SdDrawDocument::AllocSdDrawDocument() const
+{
+    SdDrawDocument* pNewModel = nullptr;
+
+    if( mpCreatingTransferable )
+    {
+        // Document is created for drag & drop/clipboard. To be able to
+        // do this, the document has to know a DocShell (SvPersist).
+        SfxObjectShell*   pObj = nullptr;
+        ::sd::DrawDocShell*     pNewDocSh = nullptr;
+
+        if( meDocType == DocumentType::Impress )
+            mpCreatingTransferable->SetDocShell( new ::sd::DrawDocShell(
+                SfxObjectCreateMode::EMBEDDED, true, meDocType ) );
+        else
+            mpCreatingTransferable->SetDocShell( new ::sd::GraphicDocShell(
+                SfxObjectCreateMode::EMBEDDED ) );
+
+        pObj = mpCreatingTransferable->GetDocShell().get();
+        pNewDocSh = static_cast< ::sd::DrawDocShell*>( pObj );
+        pNewDocSh->DoInitNew();
+        pNewModel = pNewDocSh->GetDoc();
+
+        // Only necessary for clipboard -
+        // for drag & drop this is handled by DragServer
+        SdStyleSheetPool* pOldStylePool = static_cast<SdStyleSheetPool*>( GetStyleSheetPool() );
+        SdStyleSheetPool* pNewStylePool = static_cast<SdStyleSheetPool*>( pNewModel->GetStyleSheetPool() );
+
+        pNewStylePool->CopyGraphicSheets(*pOldStylePool);
+        pNewStylePool->CopyCellSheets(*pOldStylePool);
+        pNewStylePool->CopyTableStyles(*pOldStylePool);
+
+        for (sal_uInt16 i = 0; i < GetMasterSdPageCount(PageKind::Standard); i++)
+        {
+            // Move with all of the master page's layouts
+            OUString aOldLayoutName(const_cast<SdDrawDocument*>(this)->GetMasterSdPage(i, PageKind::Standard)->GetLayoutName());
+            aOldLayoutName = aOldLayoutName.copy( 0, aOldLayoutName.indexOf( SD_LT_SEPARATOR ) );
+            StyleSheetCopyResultVector aCreatedSheets;
+            pNewStylePool->CopyLayoutSheets(aOldLayoutName, *pOldStylePool, aCreatedSheets );
+        }
+
+        lcl_copyUserDefinedProperties(GetDocSh(), pNewDocSh);
+
+        pNewModel->NewOrLoadCompleted( DocCreationMode::Loaded );  // loaded from source document
+    }
+    else if( mbAllocDocSh )
+    {
+        // Create a DocShell which is then returned with GetAllocedDocSh()
+        SdDrawDocument* pDoc = const_cast<SdDrawDocument*>(this);
+        pDoc->SetAllocDocSh(false);
+        pDoc->mxAllocedDocShRef = new ::sd::DrawDocShell(
+            SfxObjectCreateMode::EMBEDDED, true, meDocType);
+        pDoc->mxAllocedDocShRef->DoInitNew();
+        pNewModel = pDoc->mxAllocedDocShRef->GetDoc();
+    }
+    else
+    {
+        pNewModel = new SdDrawDocument(meDocType, nullptr);
+    }
+
+    return pNewModel;
+}
+
+rtl::Reference<SdPage> SdDrawDocument::AllocSdPage(bool bMasterPage)
+{
+    return new SdPage(*this, bMasterPage);
+}
+
+// This method creates a new page (SdPage) and returns a pointer to said page.
+// The drawing engine uses this method to create pages (whose types it does
+// not know, as they are _derivatives_ of SdrPage) when loading.
+rtl::Reference<SdrPage> SdDrawDocument::AllocPage(bool bMasterPage)
+{
+    return AllocSdPage(bMasterPage);
+}
+
+// When the model has changed
+void SdDrawDocument::SetChanged(bool bFlag)
+{
+    if (mpDocSh)
+    {
+        if (mbNewOrLoadCompleted && mpDocSh->IsEnableSetModified())
+        {
+            // Pass on to base class
+            FmFormModel::SetChanged(bFlag);
+
+            // Forward to ObjectShell
+            mpDocSh->SetModified(bFlag);
+        }
+    }
+    else
+    {
+        // Pass on to base class
+        FmFormModel::SetChanged(bFlag);
+    }
+}
+
+// The model changed, don't call anything else
+void SdDrawDocument::NbcSetChanged(bool bFlag)
+{
+    // forward to baseclass
+    FmFormModel::SetChanged(bFlag);
+}
+
+// NewOrLoadCompleted is called when the document is loaded, or when it is clear
+// it won't load any more.
+void SdDrawDocument::NewOrLoadCompleted(DocCreationMode eMode)
+{
+    if (eMode == DocCreationMode::New)
+    {
+        // New document:
+        // create slideshow and default templates,
+        // create pool for virtual controls
+        CreateLayoutTemplates();
+        CreateDefaultCellStyles();
+
+        static_cast< SdStyleSheetPool* >( mxStyleSheetPool.get() )->CreatePseudosIfNecessary();
+    }
+    else if (eMode == DocCreationMode::Loaded)
+    {
+            // Document has finished loading
+
+        CheckMasterPages();
+
+        if ( GetMasterSdPageCount(PageKind::Standard) > 1 )
+            RemoveUnnecessaryMasterPages( nullptr, true, false );
+
+        for ( sal_uInt16 i = 0; i < GetPageCount(); i++ )
+        {
+            // Check for correct layout names
+            SdPage* pPage = static_cast<SdPage*>( GetPage( i ) );
+
+            if(pPage->TRG_HasMasterPage())
+            {
+                SdPage& rMaster = static_cast<SdPage&>(pPage->TRG_GetMasterPage() );
+
+                if(rMaster.GetLayoutName() != pPage->GetLayoutName())
+                {
+                    pPage->SetLayoutName(rMaster.GetLayoutName());
+                }
+            }
+        }
+
+        for ( sal_uInt16 nPage = 0; nPage < GetMasterPageCount(); nPage++)
+        {
+            // LayoutName and PageName must be the same
+            SdPage* pPage = static_cast<SdPage*>( GetMasterPage( nPage ) );
+
+            OUString aName( pPage->GetLayoutName() );
+            aName = aName.copy( 0, aName.indexOf( SD_LT_SEPARATOR ) );
+
+            if( aName != pPage->GetName() )
+                pPage->SetName( aName );
+        }
+
+        // Create names of the styles in the user's language
+        static_cast<SdStyleSheetPool*>(mxStyleSheetPool.get())->UpdateStdNames();
+
+        // Create any missing styles - eg. formerly, there was no Subtitle style
+        static_cast<SdStyleSheetPool*>(mxStyleSheetPool.get())->CreatePseudosIfNecessary();
+    }
+
+    // Set default style of Drawing Engine
+    OUString aName( SdResId(STR_STANDARD_STYLESHEET_NAME));
+    SetDefaultStyleSheet(static_cast<SfxStyleSheet*>(mxStyleSheetPool->Find(aName, SfxStyleFamily::Para)));
+
+    // #i119287# Set default StyleSheet for SdrGrafObj and SdrOle2Obj
+    SetDefaultStyleSheetForSdrGrafObjAndSdrOle2Obj(static_cast<SfxStyleSheet*>(mxStyleSheetPool->Find(SdResId(STR_POOLSHEET_OBJNOLINENOFILL), SfxStyleFamily::Para)));
+
+    // Initialize DrawOutliner and DocumentOutliner, but don't initialize the
+    // global outliner, as it is not document specific like StyleSheetPool and
+    // StyleRequestHandler are.
+    ::Outliner& rDrawOutliner = GetDrawOutliner();
+    rDrawOutliner.SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
+    EEControlBits nCntrl = rDrawOutliner.GetControlWord();
+    if (mbOnlineSpell)
+        nCntrl |= EEControlBits::ONLINESPELLING;
+    else
+        nCntrl &= ~EEControlBits::ONLINESPELLING;
+    rDrawOutliner.SetControlWord(nCntrl);
+
+    // Initialize HitTestOutliner and DocumentOutliner, but don't initialize the
+    // global outliner, as it is not document specific like StyleSheetPool and
+    // StyleRequestHandler are.
+    m_pHitTestOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
+
+    if(mpOutliner)
+    {
+        mpOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
+    }
+    if(mpInternalOutliner)
+    {
+        mpInternalOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
+    }
+
+    if ( eMode == DocCreationMode::Loaded )
+    {
+        // Make presentation objects listeners of the appropriate styles
+        SdStyleSheetPool* pSPool = static_cast<SdStyleSheetPool*>( GetStyleSheetPool() );
+        sal_uInt16 nPage, nPageCount;
+
+        // create missing layout style sheets for broken documents
+        //         that were created with the 5.2
+        nPageCount = GetMasterSdPageCount( PageKind::Standard );
+        for (nPage = 0; nPage < nPageCount; nPage++)
+        {
+            SdPage* pPage = GetMasterSdPage(nPage, PageKind::Standard);
+            pSPool->CreateLayoutStyleSheets( pPage->GetName(), true );
+        }
+
+        // Default and notes pages:
+        for (nPage = 0; nPage < GetPageCount(); nPage++)
+        {
+            SdPage* pPage = static_cast<SdPage*>(GetPage(nPage));
+            NewOrLoadCompleted( pPage, pSPool );
+        }
+
+        // Master pages:
+        for (nPage = 0; nPage < GetMasterPageCount(); nPage++)
+        {
+            SdPage* pPage = static_cast<SdPage*>(GetMasterPage(nPage));
+
+            NewOrLoadCompleted( pPage, pSPool );
+        }
+    }
+
+    mbNewOrLoadCompleted = true;
+    UpdateAllLinks();
+    SetChanged( false );
+}
+
+/** updates all links, only links in this document should by resolved */
+void SdDrawDocument::UpdateAllLinks()
+{
+    if (s_pDocLockedInsertingLinks || !m_pLinkManager || m_pLinkManager->GetLinks().empty())
+        return;
+
+    s_pDocLockedInsertingLinks = this; // lock inserting links. only links in this document should by resolved
+
+    if (mpDocSh)
+    {
+        comphelper::EmbeddedObjectContainer& rEmbeddedObjectContainer = mpDocSh->getEmbeddedObjectContainer();
+        rEmbeddedObjectContainer.setUserAllowsLinkUpdate(true);
+    }
+
+    m_pLinkManager->UpdateAllLinks(true, false, nullptr);  // query box: update all links?
+
+    if (s_pDocLockedInsertingLinks == this)
+        s_pDocLockedInsertingLinks = nullptr;  // unlock inserting links
+}
+
+/** this loops over the presentation objects of a page and repairs some new settings
+    from old binary files and resets all default strings for empty presentation objects.
+*/
+void SdDrawDocument::NewOrLoadCompleted( SdPage* pPage, SdStyleSheetPool* pSPool )
+{
+    sd::ShapeList& rPresentationShapes( pPage->GetPresentationShapeList() );
+    if(rPresentationShapes.isEmpty())
+        return;
+
+    // Create lists of title and outline styles
+    OUString aName = pPage->GetLayoutName();
+    aName = aName.copy( 0, aName.indexOf( SD_LT_SEPARATOR ) );
+
+    std::vector<SfxStyleSheetBase*> aOutlineList;
+    pSPool->CreateOutlineSheetList(aName,aOutlineList);
+
+    SfxStyleSheet* pTitleSheet = static_cast<SfxStyleSheet*>(pSPool->GetTitleSheet(aName));
+
+    SdrObject* pObj = nullptr;
+    rPresentationShapes.seekShape(0);
+
+    // Now look for title and outline text objects, then make those objects
+    // listeners.
+    while( (pObj = rPresentationShapes.getNextShape()) )
+    {
+        if (pObj->GetObjInventor() == SdrInventor::Default)
+        {
+            OutlinerParaObject* pOPO = pObj->GetOutlinerParaObject();
+            SdrObjKind nId = pObj->GetObjIdentifier();
+
+            if (nId == SdrObjKind::TitleText)
+            {
+                if( pOPO && pOPO->GetOutlinerMode() == OutlinerMode::DontKnow )
+                    pOPO->SetOutlinerMode( OutlinerMode::TitleObject );
+
+                // sal_True: don't delete "hard" attributes when doing this.
+                if (pTitleSheet)
+                    pObj->SetStyleSheet(pTitleSheet, true);
+            }
+            else if (nId == SdrObjKind::OutlineText)
+            {
+                if( pOPO && pOPO->GetOutlinerMode() == OutlinerMode::DontKnow )
+                    pOPO->SetOutlinerMode( OutlinerMode::OutlineObject );
+
+                std::vector<SfxStyleSheetBase*>::iterator iter;
+                for (iter = aOutlineList.begin(); iter != aOutlineList.end(); ++iter)
+                {
+                    SfxStyleSheet* pSheet = static_cast<SfxStyleSheet*>(*iter);
+
+                    if (pSheet)
+                    {
+                        pObj->StartListening(*pSheet);
+
+                        if( iter == aOutlineList.begin())
+                            // text frame listens to stylesheet of layer 1
+                            pObj->NbcSetStyleSheet(pSheet, true);
+                    }
+                }
+            }
+
+            if( auto pTextObj = dynamic_cast<SdrTextObj *>( pObj ) )
+                if (pTextObj->IsEmptyPresObj())
+                {
+                    PresObjKind ePresObjKind = pPage->GetPresObjKind(pObj);
+                    OUString aString( pPage->GetPresObjText(ePresObjKind) );
+
+                    if (!aString.isEmpty())
+                    {
+                        SdOutliner* pInternalOutl = GetInternalOutliner();
+                        pPage->SetObjText( pTextObj, pInternalOutl, ePresObjKind, aString );
+                        pObj->NbcSetStyleSheet( pPage->GetStyleSheetForPresObj( ePresObjKind ), true );
+                        pInternalOutl->Clear();
+                    }
+                }
+        }
+    }
+}
+
+// Local outliner that is used for outline mode. In this outliner, OutlinerViews
+// may be inserted.
+SdOutliner* SdDrawDocument::GetOutliner(bool bCreateOutliner)
+{
+    if (!mpOutliner && bCreateOutliner)
+    {
+        mpOutliner.reset(new SdOutliner( this, OutlinerMode::TextObject ));
+
+        if (mpDocSh)
+            mpOutliner->SetRefDevice( SD_MOD()->GetVirtualRefDevice() );
+
+        mpOutliner->SetDefTab( m_nDefaultTabulator );
+        mpOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
+    }
+
+    return mpOutliner.get();
+}
+
+// Internal outliner that is used to create text objects. We don't insert any
+// OutlinerViews into this outliner!
+SdOutliner* SdDrawDocument::GetInternalOutliner(bool bCreateOutliner)
+{
+    if ( !mpInternalOutliner && bCreateOutliner )
+    {
+        mpInternalOutliner.reset( new SdOutliner( this, OutlinerMode::TextObject ) );
+
+        // This outliner is only used to create special text objects. As no
+        // information about portions is saved in this outliner, the update mode
+        // can/should always remain sal_False.
+        mpInternalOutliner->SetUpdateLayout( false );
+        mpInternalOutliner->EnableUndo( false );
+
+        if (mpDocSh)
+            mpInternalOutliner->SetRefDevice( SD_MOD()->GetVirtualRefDevice() );
+
+        mpInternalOutliner->SetDefTab( m_nDefaultTabulator );
+        mpInternalOutliner->SetStyleSheetPool(static_cast<SfxStyleSheetPool*>(GetStyleSheetPool()));
+    }
+
+    DBG_ASSERT( !mpInternalOutliner || ( ! mpInternalOutliner->IsUpdateLayout() ) , "InternalOutliner: UpdateMode = sal_True !" );
+    DBG_ASSERT( !mpInternalOutliner || ( ! mpInternalOutliner->IsUndoEnabled() ), "InternalOutliner: Undo = sal_True !" );
+
+    // If you add stuff here, always clear it out.
+    // Advantages:
+    // a) no unnecessary Clear calls
+    // b) no wasted memory
+    DBG_ASSERT( !mpInternalOutliner || ( ( mpInternalOutliner->GetParagraphCount() == 1 ) && ( mpInternalOutliner->GetText( mpInternalOutliner->GetParagraph( 0 ) ).isEmpty() ) ), "InternalOutliner: not empty!" );
+
+    return mpInternalOutliner.get();
+}
+
+// OnlineSpelling on/off
+void SdDrawDocument::SetOnlineSpell(bool bIn)
+{
+    mbOnlineSpell = bIn;
+    EEControlBits nCntrl;
+
+    if(mpOutliner)
+    {
+        nCntrl = mpOutliner->GetControlWord();
+
+        if(mbOnlineSpell)
+            nCntrl |= EEControlBits::ONLINESPELLING;
+        else
+            nCntrl &= ~EEControlBits::ONLINESPELLING;
+
+        mpOutliner->SetControlWord(nCntrl);
+    }
+
+    if (mpInternalOutliner)
+    {
+        nCntrl = mpInternalOutliner->GetControlWord();
+
+        if (mbOnlineSpell)
+            nCntrl |= EEControlBits::ONLINESPELLING;
+        else
+            nCntrl &= ~EEControlBits::ONLINESPELLING;
+
+        mpInternalOutliner->SetControlWord(nCntrl);
+    }
+
+    ::Outliner& rOutliner = GetDrawOutliner();
+
+    nCntrl = rOutliner.GetControlWord();
+
+    if (mbOnlineSpell)
+        nCntrl |= EEControlBits::ONLINESPELLING;
+    else
+        nCntrl &= ~EEControlBits::ONLINESPELLING;
+
+    rOutliner.SetControlWord(nCntrl);
+
+    if (mbOnlineSpell)
+    {
+        StartOnlineSpelling();
+    }
+    else
+    {
+        StopOnlineSpelling();
+    }
+}
+
+// OnlineSpelling: highlighting on/off
+uno::Reference< uno::XInterface > SdDrawDocument::createUnoModel()
+{
+    uno::Reference< uno::XInterface > xModel;
+
+    try
+    {
+        if ( mpDocSh )
+            xModel = mpDocSh->GetModel();
+    }
+    catch( uno::RuntimeException& )
+    {
+    }
+
+    return xModel;
+}
+
+SvxNumType SdDrawDocument::GetPageNumType() const
+{
+    return mePageNumType;
+}
+
+void SdDrawDocument::SetPrinterIndependentLayout (sal_Int32 nMode)
+{
+    switch (nMode)
+    {
+        case css::document::PrinterIndependentLayout::DISABLED:
+        case css::document::PrinterIndependentLayout::ENABLED:
+            // Just store supported modes and inform the doc shell
+            mnPrinterIndependentLayout = nMode;
+
+            // Since it is possible that a SdDrawDocument is constructed without a
+            // SdDrawDocShell the pointer member mpDocSh needs to be tested
+            // before the call is executed. This is e. g. used for copy/paste.
+            if(mpDocSh)
+            {
+                mpDocSh->UpdateRefDevice ();
+            }
+
+            break;
+
+        default:
+            // Ignore unknown values
+            break;
+    }
+}
+
+void SdDrawDocument::SetStartWithPresentation( bool bStartWithPresentation )
+{
+    mbStartWithPresentation = bStartWithPresentation;
+}
+
+void SdDrawDocument::SetExitAfterPresenting( bool bExitAfterPresenting )
+{
+    mbExitAfterPresenting = bExitAfterPresenting;
+}
+
+void SdDrawDocument::PageListChanged()
+{
+    mpDrawPageListWatcher->Invalidate();
+}
+
+void SdDrawDocument::MasterPageListChanged()
+{
+    mpMasterPageListWatcher->Invalidate();
+}
+
+void SdDrawDocument::SetCalcFieldValueHdl(::Outliner* pOutliner)
+{
+    pOutliner->SetCalcFieldValueHdl(LINK(SD_MOD(), SdModule, CalcFieldValueHdl));
+}
+
+sal_uInt16 SdDrawDocument::GetAnnotationAuthorIndex( const OUString& rAuthor )
+{
+    // force current user to have first color
+    if( maAnnotationAuthors.empty() )
+    {
+        SvtUserOptions aUserOptions;
+        maAnnotationAuthors.push_back( aUserOptions.GetFullName() );
+    }
+
+    auto iter = std::find(maAnnotationAuthors.begin(), maAnnotationAuthors.end(), rAuthor);
+    sal_uInt16 idx = static_cast<sal_uInt16>(std::distance(maAnnotationAuthors.begin(), iter));
+
+    if( idx == maAnnotationAuthors.size() )
+    {
+        maAnnotationAuthors.push_back( rAuthor );
+    }
+
+    return idx;
+}
+
+void SdDrawDocument::InitLayoutVector()
+{
+    if (utl::ConfigManager::IsFuzzing())
+        return;
+
+    const Reference<css::uno::XComponentContext> xContext(
+        ::comphelper::getProcessComponentContext() );
+
+    // get file list from configuration
+    const Sequence< OUString > aFiles(
+        officecfg::Office::Impress::Misc::LayoutListFiles::get() );
+
+    if (aFiles.getLength() == 0)
+        return;
+    const Reference<XDocumentBuilder> xDocBuilder = DocumentBuilder::create( xContext );
+
+    for( const auto& rFile : aFiles )
+    {
+        OUString sFilename = comphelper::getExpandedUri(xContext, rFile);
+
+        // load layout file into DOM
+
+        try
+        {
+            // loop over every layout entry in current file
+            const Reference<XDocument> xDoc = xDocBuilder->parseURI( sFilename );
+            const Reference<XNodeList> layoutlist = xDoc->getElementsByTagName("layout");
+            const int nElements = layoutlist->getLength();
+            for(int index=0; index < nElements; index++)
+                maLayoutInfo.push_back( layoutlist->item(index) );
+        }
+        catch (const uno::Exception &)
+        {
+            // skip missing config. files
+        }
+    }
+}
+
+void SdDrawDocument::InitObjectVector()
+{
+    if (utl::ConfigManager::IsFuzzing())
+        return;
+
+    const Reference<css::uno::XComponentContext> xContext(
+        ::comphelper::getProcessComponentContext() );
+
+    // get file list from configuration
+    const Sequence< OUString > aFiles(
+       officecfg::Office::Impress::Misc::PresObjListFiles::get() );
+
+    if (aFiles.getLength() == 0)
+        return;
+    const Reference<XDocumentBuilder> xDocBuilder = DocumentBuilder::create( xContext );
+    for( const auto& rFile : aFiles )
+    {
+        OUString sFilename = comphelper::getExpandedUri(xContext, rFile);
+
+        // load presentation object file into DOM
+
+        try
+        {
+            // loop over every object entry in current file
+            const Reference<XDocument> xDoc = xDocBuilder->parseURI( sFilename );
+            const Reference<XNodeList> objectlist = xDoc->getElementsByTagName("object");
+            const int nElements = objectlist->getLength();
+            for(int index=0; index < nElements; index++)
+                maPresObjectInfo.push_back( objectlist->item(index) );
+        }
+        catch (const uno::Exception &)
+        {
+            // skip missing config. files
+        }
+    }
+}
+
+void SdDrawDocument::dumpAsXml(xmlTextWriterPtr pWriter) const
+{
+    bool bOwns = false;
+    if (!pWriter)
+    {
+        pWriter = xmlNewTextWriterFilename("model.xml", 0);
+        xmlTextWriterSetIndent(pWriter,1);
+        (void)xmlTextWriterSetIndentString(pWriter, BAD_CAST("  "));
+        (void)xmlTextWriterStartDocument(pWriter, nullptr, nullptr, nullptr);
+        bOwns = true;
+    }
+    (void)xmlTextWriterStartElement(pWriter, BAD_CAST("SdDrawDocument"));
+    (void)xmlTextWriterWriteFormatAttribute(pWriter, BAD_CAST("ptr"), "%p", this);
+
+    if (mpOutliner)
+        mpOutliner->dumpAsXml(pWriter);
+    FmFormModel::dumpAsXml(pWriter);
+    if (GetUndoManager())
+        GetUndoManager()->dumpAsXml(pWriter);
+
+    (void)xmlTextWriterEndElement(pWriter);
+    if (bOwns)
+    {
+        (void)xmlTextWriterEndDocument(pWriter);
+        xmlFreeTextWriter(pWriter);
+    }
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */