diff options
Diffstat (limited to 'basctl/source/dlged/dlgedobj.cxx')
| -rw-r--r-- | basctl/source/dlged/dlgedobj.cxx | 1703 |
1 files changed, 1703 insertions, 0 deletions
diff --git a/basctl/source/dlged/dlgedobj.cxx b/basctl/source/dlged/dlgedobj.cxx new file mode 100644 index 000000000..1d89210b7 --- /dev/null +++ b/basctl/source/dlged/dlgedobj.cxx @@ -0,0 +1,1703 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <sal/config.h> +#include <sal/log.hxx> + +#include <cassert> + +#include <dlged.hxx> +#include <dlgeddef.hxx> +#include <dlgedlist.hxx> +#include <dlgedobj.hxx> +#include <dlgedpage.hxx> +#include <dlgedview.hxx> +#include <localizationmgr.hxx> +#include <strings.hxx> + +#include <com/sun/star/beans/NamedValue.hpp> +#include <com/sun/star/form/binding/XBindableValue.hpp> +#include <com/sun/star/form/binding/XValueBinding.hpp> +#include <com/sun/star/form/binding/XListEntrySink.hpp> +#include <com/sun/star/awt/XUnoControlContainer.hpp> +#include <com/sun/star/awt/XVclContainerPeer.hpp> +#include <com/sun/star/container/XContainer.hpp> +#include <com/sun/star/lang/XServiceInfo.hpp> +#include <com/sun/star/lang/WrappedTargetRuntimeException.hpp> +#include <com/sun/star/script/XScriptEventsSupplier.hpp> +#include <com/sun/star/table/CellAddress.hpp> +#include <cppuhelper/exc_hlp.hxx> +#include <o3tl/functional.hxx> +#include <svx/svdpagv.hxx> +#include <unotools/sharedunocomponent.hxx> +#include <vcl/svapp.hxx> +#include <tools/debug.hxx> + +namespace basctl +{ + +using namespace ::com::sun::star; +using namespace ::com::sun::star::uno; +using namespace ::com::sun::star::beans; +using namespace ::com::sun::star::container; +using namespace ::com::sun::star::script; + + +DlgEditor& DlgEdObj::GetDialogEditor () +{ + if (DlgEdForm* pFormThis = dynamic_cast<DlgEdForm*>(this)) + return pFormThis->GetDlgEditor(); + else + return pDlgEdForm->GetDlgEditor(); +} + +DlgEdObj::DlgEdObj(SdrModel& rSdrModel) +: SdrUnoObj(rSdrModel, OUString()) + ,bIsListening(false) + ,pDlgEdForm( nullptr ) +{ +} + +DlgEdObj::DlgEdObj(SdrModel& rSdrModel, DlgEdObj const & rSource) +: SdrUnoObj(rSdrModel, rSource) + ,bIsListening(false) +{ + // set parent form + pDlgEdForm = rSource.pDlgEdForm; + + // add child to parent form + pDlgEdForm->AddChild( this ); + + Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY ); + if ( xPSet.is() ) + { + // set new name + OUString aOUniqueName( GetUniqueName() ); + Any aUniqueName; + aUniqueName <<= aOUniqueName; + xPSet->setPropertyValue( DLGED_PROP_NAME, aUniqueName ); + + Reference< container::XNameContainer > xCont( GetDlgEdForm()->GetUnoControlModel() , UNO_QUERY ); + if ( xCont.is() ) + { + // set tabindex + Sequence< OUString > aNames = xCont->getElementNames(); + xPSet->setPropertyValue( DLGED_PROP_TABINDEX, Any(static_cast<sal_Int16>(aNames.getLength())) ); + + // insert control model in dialog model + Reference< awt::XControlModel > xCtrl( xPSet , UNO_QUERY ); + xCont->insertByName( aOUniqueName, Any(xCtrl) ); + + pDlgEdForm->UpdateTabOrderAndGroups(); + } + } + + // start listening + StartListening(); +} + +DlgEdObj::DlgEdObj( + SdrModel& rSdrModel, + const OUString& rModelName, + const css::uno::Reference< css::lang::XMultiServiceFactory >& rxSFac) +: SdrUnoObj(rSdrModel, rModelName, rxSFac) + ,bIsListening(false) + ,pDlgEdForm( nullptr ) +{ +} + +DlgEdObj::~DlgEdObj() +{ + if ( isListening() ) + EndListening(true); +} + +namespace +{ + /* returns the DlgEdForm which the given DlgEdObj belongs to + (which might in fact be the object itself) + + Failure to obtain the form will be reported with an assertion in the non-product + version. + */ + bool lcl_getDlgEdForm( DlgEdObj* _pObject, DlgEdForm*& _out_pDlgEdForm ) + { + _out_pDlgEdForm = dynamic_cast< DlgEdForm* >( _pObject ); + if ( !_out_pDlgEdForm ) + _out_pDlgEdForm = _pObject->GetDlgEdForm(); + DBG_ASSERT( _out_pDlgEdForm, "lcl_getDlgEdForm: no form!" ); + return ( _out_pDlgEdForm != nullptr ); + } +} + +uno::Reference< awt::XControl > DlgEdObj::GetControl() const +{ + uno::Reference< awt::XControl > xControl; + if (DlgEdForm const* pForm = GetDlgEdForm()) + { + DlgEditor const& rEditor = pForm->GetDlgEditor(); + xControl = GetUnoControl(rEditor.GetView(), *rEditor.GetWindow().GetOutDev()); + } + return xControl; +} + +bool DlgEdObj::TransformSdrToControlCoordinates( + sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn, + sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut ) +{ + // input position and size + Size aPos( nXIn, nYIn ); + Size aSize( nWidthIn, nHeightIn ); + + // form position + DlgEdForm* pForm = nullptr; + if ( !lcl_getDlgEdForm( this, pForm ) ) + return false; + tools::Rectangle aFormRect = pForm->GetSnapRect(); + Size aFormPos( aFormRect.Left(), aFormRect.Top() ); + + // convert 100th_mm to pixel + OutputDevice* pDevice = Application::GetDefaultDevice(); + DBG_ASSERT( pDevice, "DlgEdObj::TransformSdrToControlCoordinates: missing default device!" ); + if ( !pDevice ) + return false; + aPos = pDevice->LogicToPixel( aPos, MapMode( MapUnit::Map100thMM ) ); + aSize = pDevice->LogicToPixel( aSize, MapMode( MapUnit::Map100thMM ) ); + aFormPos = pDevice->LogicToPixel( aFormPos, MapMode( MapUnit::Map100thMM ) ); + + // subtract form position + aPos.AdjustWidth( -(aFormPos.Width()) ); + aPos.AdjustHeight( -(aFormPos.Height()) ); + + // take window borders into account + Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY ); + DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformFormToSdrCoordinates: no form property set!" ); + if ( !xPSetForm.is() ) + return false; + bool bDecoration = true; + xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration; + if( bDecoration ) + { + awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo(); + aPos.AdjustWidth( -(aDeviceInfo.LeftInset) ); + aPos.AdjustHeight( -(aDeviceInfo.TopInset) ); + } + + // convert pixel to logic units + aPos = pDevice->PixelToLogic(aPos, MapMode(MapUnit::MapAppFont)); + aSize = pDevice->PixelToLogic(aSize, MapMode(MapUnit::MapAppFont)); + + // set out parameters + nXOut = aPos.Width(); + nYOut = aPos.Height(); + nWidthOut = aSize.Width(); + nHeightOut = aSize.Height(); + + return true; +} + +bool DlgEdObj::TransformSdrToFormCoordinates( + sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn, + sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut ) +{ + // input position and size + Size aPos( nXIn, nYIn ); + Size aSize( nWidthIn, nHeightIn ); + + // convert 100th_mm to pixel + OutputDevice* pDevice = Application::GetDefaultDevice(); + DBG_ASSERT( pDevice, "DlgEdObj::TransformSdrToFormCoordinates: missing default device!" ); + if ( !pDevice ) + return false; + aPos = pDevice->LogicToPixel( aPos, MapMode( MapUnit::Map100thMM ) ); + aSize = pDevice->LogicToPixel( aSize, MapMode( MapUnit::Map100thMM ) ); + + // take window borders into account + DlgEdForm* pForm = nullptr; + if ( !lcl_getDlgEdForm( this, pForm ) ) + return false; + + // take window borders into account + Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY ); + DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformFormToSdrCoordinates: no form property set!" ); + if ( !xPSetForm.is() ) + return false; + bool bDecoration = true; + xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration; + if( bDecoration ) + { + awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo(); + aSize.AdjustWidth( -(aDeviceInfo.LeftInset + aDeviceInfo.RightInset) ); + aSize.AdjustHeight( -(aDeviceInfo.TopInset + aDeviceInfo.BottomInset) ); + } + // convert pixel to logic units + aPos = pDevice->PixelToLogic(aPos, MapMode(MapUnit::MapAppFont)); + aSize = pDevice->PixelToLogic(aSize, MapMode(MapUnit::MapAppFont)); + + // set out parameters + nXOut = aPos.Width(); + nYOut = aPos.Height(); + nWidthOut = aSize.Width(); + nHeightOut = aSize.Height(); + + return true; +} + +bool DlgEdObj::TransformControlToSdrCoordinates( + sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn, + sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut ) +{ + // input position and size + Size aPos( nXIn, nYIn ); + Size aSize( nWidthIn, nHeightIn ); + + // form position + DlgEdForm* pForm = nullptr; + if ( !lcl_getDlgEdForm( this, pForm ) ) + return false; + + Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY ); + DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformControlToSdrCoordinates: no form property set!" ); + if ( !xPSetForm.is() ) + return false; + sal_Int32 nFormX = 0, nFormY = 0; + xPSetForm->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nFormX; + xPSetForm->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nFormY; + Size aFormPos( nFormX, nFormY ); + + // convert logic units to pixel + OutputDevice* pDevice = Application::GetDefaultDevice(); + DBG_ASSERT( pDevice, "DlgEdObj::TransformControlToSdrCoordinates: missing default device!" ); + if ( !pDevice ) + return false; + aPos = pDevice->LogicToPixel(aPos, MapMode(MapUnit::MapAppFont)); + aSize = pDevice->LogicToPixel(aSize, MapMode(MapUnit::MapAppFont)); + aFormPos = pDevice->LogicToPixel(aFormPos, MapMode(MapUnit::MapAppFont)); + + // add form position + aPos.AdjustWidth(aFormPos.Width() ); + aPos.AdjustHeight(aFormPos.Height() ); + + // take window borders into account + bool bDecoration = true; + xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration; + if( bDecoration ) + { + awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo(); + aPos.AdjustWidth(aDeviceInfo.LeftInset ); + aPos.AdjustHeight(aDeviceInfo.TopInset ); + } + + // convert pixel to 100th_mm + aPos = pDevice->PixelToLogic( aPos, MapMode( MapUnit::Map100thMM ) ); + aSize = pDevice->PixelToLogic( aSize, MapMode( MapUnit::Map100thMM ) ); + + // set out parameters + nXOut = aPos.Width(); + nYOut = aPos.Height(); + nWidthOut = aSize.Width(); + nHeightOut = aSize.Height(); + + return true; +} + +bool DlgEdObj::TransformFormToSdrCoordinates( + sal_Int32 nXIn, sal_Int32 nYIn, sal_Int32 nWidthIn, sal_Int32 nHeightIn, + sal_Int32& nXOut, sal_Int32& nYOut, sal_Int32& nWidthOut, sal_Int32& nHeightOut ) +{ + // input position and size + Size aPos( nXIn, nYIn ); + Size aSize( nWidthIn, nHeightIn ); + + // convert logic units to pixel + OutputDevice* pDevice = Application::GetDefaultDevice(); + DBG_ASSERT( pDevice, "DlgEdObj::TransformFormToSdrCoordinates: missing default device!" ); + if ( !pDevice ) + return false; + + // take window borders into account + DlgEdForm* pForm = nullptr; + if ( !lcl_getDlgEdForm( this, pForm ) ) + return false; + + aPos = pDevice->LogicToPixel(aPos, MapMode(MapUnit::MapAppFont)); + aSize = pDevice->LogicToPixel(aSize, MapMode(MapUnit::MapAppFont)); + + // take window borders into account + Reference< beans::XPropertySet > xPSetForm( pForm->GetUnoControlModel(), UNO_QUERY ); + DBG_ASSERT( xPSetForm.is(), "DlgEdObj::TransformFormToSdrCoordinates: no form property set!" ); + if ( !xPSetForm.is() ) + return false; + bool bDecoration = true; + xPSetForm->getPropertyValue( DLGED_PROP_DECORATION ) >>= bDecoration; + if( bDecoration ) + { + awt::DeviceInfo aDeviceInfo = pForm->getDeviceInfo(); + aSize.AdjustWidth(aDeviceInfo.LeftInset + aDeviceInfo.RightInset ); + aSize.AdjustHeight(aDeviceInfo.TopInset + aDeviceInfo.BottomInset ); + } + + // convert pixel to 100th_mm + aPos = pDevice->PixelToLogic( aPos, MapMode( MapUnit::Map100thMM ) ); + aSize = pDevice->PixelToLogic( aSize, MapMode( MapUnit::Map100thMM ) ); + + // set out parameters + nXOut = aPos.Width(); + nYOut = aPos.Height(); + nWidthOut = aSize.Width(); + nHeightOut = aSize.Height(); + + return true; +} + +void DlgEdObj::SetRectFromProps() +{ + // get control position and size from properties + Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY ); + if ( !xPSet.is() ) + return; + + sal_Int32 nXIn = 0, nYIn = 0, nWidthIn = 0, nHeightIn = 0; + xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nXIn; + xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nYIn; + xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidthIn; + xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeightIn; + + // transform coordinates + sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut; + if ( TransformControlToSdrCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) ) + { + // set rectangle position and size + Point aPoint( nXOut, nYOut ); + Size aSize( nWidthOut, nHeightOut ); + SetSnapRect( tools::Rectangle( aPoint, aSize ) ); + } +} + +void DlgEdObj::SetPropsFromRect() +{ + // get control position and size from rectangle + tools::Rectangle aRect_ = GetSnapRect(); + sal_Int32 nXIn = aRect_.Left(); + sal_Int32 nYIn = aRect_.Top(); + sal_Int32 nWidthIn = aRect_.GetWidth(); + sal_Int32 nHeightIn = aRect_.GetHeight(); + + // transform coordinates + sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut; + if ( TransformSdrToControlCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) ) + { + // set properties + Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY ); + if ( xPSet.is() ) + { + xPSet->setPropertyValue( DLGED_PROP_POSITIONX, Any(nXOut) ); + xPSet->setPropertyValue( DLGED_PROP_POSITIONY, Any(nYOut) ); + xPSet->setPropertyValue( DLGED_PROP_WIDTH, Any(nWidthOut) ); + xPSet->setPropertyValue( DLGED_PROP_HEIGHT, Any(nHeightOut) ); + } + } +} + +void DlgEdObj::PositionAndSizeChange( const beans::PropertyChangeEvent& evt ) +{ + DBG_ASSERT( pDlgEdForm, "DlgEdObj::PositionAndSizeChange: no form!" ); + DlgEdPage& rPage = pDlgEdForm->GetDlgEditor().GetPage(); + { + Size aPageSize = rPage.GetSize(); + sal_Int32 nPageWidthIn = aPageSize.Width(); + sal_Int32 nPageHeightIn = aPageSize.Height(); + sal_Int32 nPageX, nPageY, nPageWidth, nPageHeight; + if ( TransformSdrToControlCoordinates( 0/*nPageXIn*/, 0/*nPageYIn*/, nPageWidthIn, nPageHeightIn, nPageX, nPageY, nPageWidth, nPageHeight ) ) + { + Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY ); + if ( xPSet.is() ) + { + sal_Int32 nX = 0, nY = 0, nWidth = 0, nHeight = 0; + xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nX; + xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nY; + xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidth; + xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeight; + + sal_Int32 nValue = 0; + evt.NewValue >>= nValue; + sal_Int32 nNewValue = nValue; + + if ( evt.PropertyName == DLGED_PROP_POSITIONX ) + { + if ( nNewValue + nWidth > nPageX + nPageWidth ) + nNewValue = nPageX + nPageWidth - nWidth; + if ( nNewValue < nPageX ) + nNewValue = nPageX; + } + else if ( evt.PropertyName == DLGED_PROP_POSITIONY ) + { + if ( nNewValue + nHeight > nPageY + nPageHeight ) + nNewValue = nPageY + nPageHeight - nHeight; + if ( nNewValue < nPageY ) + nNewValue = nPageY; + } + else if ( evt.PropertyName == DLGED_PROP_WIDTH ) + { + if ( nX + nNewValue > nPageX + nPageWidth ) + nNewValue = nPageX + nPageWidth - nX; + if ( nNewValue < 1 ) + nNewValue = 1; + } + else if ( evt.PropertyName == DLGED_PROP_HEIGHT ) + { + if ( nY + nNewValue > nPageY + nPageHeight ) + nNewValue = nPageY + nPageHeight - nY; + if ( nNewValue < 1 ) + nNewValue = 1; + } + + if ( nNewValue != nValue ) + { + EndListening( false ); + xPSet->setPropertyValue( evt.PropertyName, Any(nNewValue) ); + StartListening(); + } + } + } + } + + SetRectFromProps(); +} + +void DlgEdObj::NameChange( const css::beans::PropertyChangeEvent& evt ) +{ + // get old name + OUString aOldName; + evt.OldValue >>= aOldName; + + // get new name + OUString aNewName; + evt.NewValue >>= aNewName; + + if ( aNewName == aOldName ) + return; + + Reference< container::XNameAccess > xNameAcc((GetDlgEdForm()->GetUnoControlModel()), UNO_QUERY); + if ( !(xNameAcc.is() && xNameAcc->hasByName(aOldName)) ) + return; + + if (!xNameAcc->hasByName(aNewName) && !aNewName.isEmpty()) + { + // remove the control by the old name and insert the control by the new name in the container + Reference< container::XNameContainer > xCont(xNameAcc, UNO_QUERY ); + if ( xCont.is() ) + { + Reference< awt::XControlModel > xCtrl = GetUnoControlModel(); + Any aAny; + aAny <<= xCtrl; + xCont->removeByName( aOldName ); + xCont->insertByName( aNewName , aAny ); + + LocalizationMgr::renameControlResourceIDsForEditorObject( + &GetDialogEditor(), aAny, aNewName + ); + } + } + else + { + // set old name property + EndListening(false); + Reference< beans::XPropertySet > xPSet(GetUnoControlModel(), UNO_QUERY); + xPSet->setPropertyValue( DLGED_PROP_NAME, Any(aOldName) ); + StartListening(); + } +} + +sal_Int32 DlgEdObj::GetStep() const +{ + // get step property + sal_Int32 nStep = 0; + uno::Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), uno::UNO_QUERY ); + if (xPSet.is()) + { + xPSet->getPropertyValue( DLGED_PROP_STEP ) >>= nStep; + } + return nStep; +} + +void DlgEdObj::UpdateStep() +{ + sal_Int32 nCurStep = GetDlgEdForm()->GetStep(); + sal_Int32 nStep = GetStep(); + + SdrLayerAdmin& rLayerAdmin(getSdrModelFromSdrObject().GetLayerAdmin()); + SdrLayerID nHiddenLayerId = rLayerAdmin.GetLayerID( "HiddenLayer" ); + SdrLayerID nControlLayerId = rLayerAdmin.GetLayerID( rLayerAdmin.GetControlLayerName() ); + + if( nCurStep ) + { + if ( nStep && (nStep != nCurStep) ) + { + SetLayer( nHiddenLayerId ); + } + else + { + SetLayer( nControlLayerId ); + } + } + else + { + SetLayer( nControlLayerId ); + } +} + +void DlgEdObj::TabIndexChange( const beans::PropertyChangeEvent& evt ) +{ + DlgEdForm* pForm = GetDlgEdForm(); + if ( !pForm ) + return; + + // stop listening with all children + std::vector<DlgEdObj*> aChildList = pForm->GetChildren(); + for (auto const& child : aChildList) + { + child->EndListening( false ); + } + + Reference< container::XNameAccess > xNameAcc( pForm->GetUnoControlModel() , UNO_QUERY ); + if ( xNameAcc.is() ) + { + // get sequence of control names + Sequence< OUString > aNames = xNameAcc->getElementNames(); + const OUString* pNames = aNames.getConstArray(); + sal_Int32 nCtrls = aNames.getLength(); + + // create a map of tab indices and control names, sorted by tab index + IndexToNameMap aIndexToNameMap; + for ( sal_Int32 i = 0; i < nCtrls; ++i ) + { + // get control name + OUString aName( pNames[i] ); + + // get tab index + sal_Int16 nTabIndex = -1; + Any aCtrl = xNameAcc->getByName( aName ); + Reference< beans::XPropertySet > xPSet; + aCtrl >>= xPSet; + if ( xPSet.is() && xPSet == Reference< beans::XPropertySet >( evt.Source, UNO_QUERY ) ) + evt.OldValue >>= nTabIndex; + else if ( xPSet.is() ) + xPSet->getPropertyValue( DLGED_PROP_TABINDEX ) >>= nTabIndex; + + // insert into map + aIndexToNameMap.emplace( nTabIndex, aName ); + } + + // create a helper list of control names, sorted by tab index + std::vector< OUString > aNameList( aIndexToNameMap.size() ); + std::transform( + aIndexToNameMap.begin(), aIndexToNameMap.end(), + aNameList.begin(), + ::o3tl::select2nd< IndexToNameMap::value_type >( ) + ); + + // check tab index + sal_Int16 nOldTabIndex = 0; + evt.OldValue >>= nOldTabIndex; + sal_Int16 nNewTabIndex = 0; + evt.NewValue >>= nNewTabIndex; + if ( nNewTabIndex < 0 ) + nNewTabIndex = 0; + else if ( nNewTabIndex > nCtrls - 1 ) + nNewTabIndex = sal::static_int_cast<sal_Int16>( nCtrls - 1 ); + + // reorder helper list + OUString aCtrlName = aNameList[nOldTabIndex]; + aNameList.erase( aNameList.begin() + nOldTabIndex ); + aNameList.insert( aNameList.begin() + nNewTabIndex , aCtrlName ); + + // set new tab indices + for ( sal_Int32 i = 0; i < nCtrls; ++i ) + { + Any aCtrl = xNameAcc->getByName( aNameList[i] ); + Reference< beans::XPropertySet > xPSet; + aCtrl >>= xPSet; + if ( xPSet.is() ) + { + assert(i >= SAL_MIN_INT16); + if (i > SAL_MAX_INT16) + { + SAL_WARN("basctl", "tab " << i << " > SAL_MAX_INT16"); + continue; + } + xPSet->setPropertyValue( DLGED_PROP_TABINDEX, Any(static_cast<sal_Int16>(i)) ); + } + } + + // reorder objects in drawing page + getSdrModelFromSdrObject().GetPage(0)->SetObjectOrdNum( nOldTabIndex + 1, nNewTabIndex + 1 ); + + pForm->UpdateTabOrderAndGroups(); + } + + // start listening with all children + for (auto const& child : aChildList) + { + child->StartListening(); + } +} + +bool DlgEdObj::supportsService( OUString const & serviceName ) const +{ + bool bSupports = false; + + Reference< lang::XServiceInfo > xServiceInfo( GetUnoControlModel() , UNO_QUERY ); + // TODO: cache xServiceInfo as member? + if ( xServiceInfo.is() ) + bSupports = xServiceInfo->supportsService( serviceName ); + + return bSupports; +} + +OUString DlgEdObj::GetDefaultName() const +{ + OUString sResId; + OUString aDefaultName; + if ( supportsService( "com.sun.star.awt.UnoControlDialogModel" ) ) + { + sResId = RID_STR_CLASS_DIALOG; + } + else if ( supportsService( "com.sun.star.awt.UnoControlButtonModel" ) ) + { + sResId = RID_STR_CLASS_BUTTON; + } + else if ( supportsService( "com.sun.star.awt.UnoControlRadioButtonModel" ) ) + { + sResId = RID_STR_CLASS_RADIOBUTTON; + } + else if ( supportsService( "com.sun.star.awt.UnoControlCheckBoxModel" ) ) + { + sResId = RID_STR_CLASS_CHECKBOX; + } + else if ( supportsService( "com.sun.star.awt.UnoControlListBoxModel" ) ) + { + sResId = RID_STR_CLASS_LISTBOX; + } + else if ( supportsService( "com.sun.star.awt.UnoControlComboBoxModel" ) ) + { + sResId = RID_STR_CLASS_COMBOBOX; + } + else if ( supportsService( "com.sun.star.awt.UnoControlGroupBoxModel" ) ) + { + sResId = RID_STR_CLASS_GROUPBOX; + } + else if ( supportsService( "com.sun.star.awt.UnoControlEditModel" ) ) + { + sResId = RID_STR_CLASS_EDIT; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFixedTextModel" ) ) + { + sResId = RID_STR_CLASS_FIXEDTEXT; + } + else if ( supportsService( "com.sun.star.awt.UnoControlImageControlModel" ) ) + { + sResId = RID_STR_CLASS_IMAGECONTROL; + } + else if ( supportsService( "com.sun.star.awt.UnoControlProgressBarModel" ) ) + { + sResId = RID_STR_CLASS_PROGRESSBAR; + } + else if ( supportsService( "com.sun.star.awt.UnoControlScrollBarModel" ) ) + { + sResId = RID_STR_CLASS_SCROLLBAR; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFixedLineModel" ) ) + { + sResId = RID_STR_CLASS_FIXEDLINE; + } + else if ( supportsService( "com.sun.star.awt.UnoControlDateFieldModel" ) ) + { + sResId = RID_STR_CLASS_DATEFIELD; + } + else if ( supportsService( "com.sun.star.awt.UnoControlTimeFieldModel" ) ) + { + sResId = RID_STR_CLASS_TIMEFIELD; + } + else if ( supportsService( "com.sun.star.awt.UnoControlNumericFieldModel" ) ) + { + sResId = RID_STR_CLASS_NUMERICFIELD; + } + else if ( supportsService( "com.sun.star.awt.UnoControlCurrencyFieldModel" ) ) + { + sResId = RID_STR_CLASS_CURRENCYFIELD; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFormattedFieldModel" ) ) + { + sResId = RID_STR_CLASS_FORMATTEDFIELD; + } + else if ( supportsService( "com.sun.star.awt.UnoControlPatternFieldModel" ) ) + { + sResId = RID_STR_CLASS_PATTERNFIELD; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFileControlModel" ) ) + { + sResId = RID_STR_CLASS_FILECONTROL; + } + else if ( supportsService( "com.sun.star.awt.tree.TreeControlModel" ) ) + { + sResId = RID_STR_CLASS_TREECONTROL; + } + else if ( supportsService( "com.sun.star.awt.grid.UnoControlGridModel" ) ) + { + sResId = RID_STR_CLASS_GRIDCONTROL; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFixedHyperlinkModel" ) ) + { + sResId = RID_STR_CLASS_HYPERLINKCONTROL; + } + else if ( supportsService( "com.sun.star.awt.UnoControlSpinButtonModel" ) ) + { + sResId = RID_STR_CLASS_SPINCONTROL; + } + else + { + sResId = RID_STR_CLASS_CONTROL; + } + + if (!sResId.isEmpty()) + aDefaultName = sResId; + + return aDefaultName; +} + +OUString DlgEdObj::GetUniqueName() const +{ + OUString aUniqueName; + uno::Reference< container::XNameAccess > xNameAcc((GetDlgEdForm()->GetUnoControlModel()), uno::UNO_QUERY); + + if ( xNameAcc.is() ) + { + sal_Int32 n = 0; + OUString aDefaultName = GetDefaultName(); + + do + { + aUniqueName = aDefaultName + OUString::number(++n); + } while (xNameAcc->hasByName(aUniqueName)); + } + + return aUniqueName; +} + +SdrInventor DlgEdObj::GetObjInventor() const +{ + return SdrInventor::BasicDialog; +} + +SdrObjKind DlgEdObj::GetObjIdentifier() const +{ + if ( supportsService( "com.sun.star.awt.UnoControlDialogModel" )) + { + return SdrObjKind::BasicDialogDialog; + } + else if ( supportsService( "com.sun.star.awt.UnoControlButtonModel" )) + { + return SdrObjKind::BasicDialogPushButton; + } + else if ( supportsService( "com.sun.star.awt.UnoControlRadioButtonModel" )) + { + return SdrObjKind::BasicDialogRadioButton; + } + else if ( supportsService( "com.sun.star.awt.UnoControlCheckBoxModel" )) + { + return SdrObjKind::BasicDialogCheckbox; + } + else if ( supportsService( "com.sun.star.awt.UnoControlListBoxModel" )) + { + return SdrObjKind::BasicDialogListbox; + } + else if ( supportsService( "com.sun.star.awt.UnoControlComboBoxModel" )) + { + return SdrObjKind::BasicDialogCombobox; + } + else if ( supportsService( "com.sun.star.awt.UnoControlGroupBoxModel" )) + { + return SdrObjKind::BasicDialogGroupBox; + } + else if ( supportsService( "com.sun.star.awt.UnoControlEditModel" )) + { + return SdrObjKind::BasicDialogEdit; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFixedTextModel" )) + { + return SdrObjKind::BasicDialogFixedText; + } + else if ( supportsService( "com.sun.star.awt.UnoControlImageControlModel" )) + { + return SdrObjKind::BasicDialogImageControl; + } + else if ( supportsService( "com.sun.star.awt.UnoControlProgressBarModel" )) + { + return SdrObjKind::BasicDialogProgressbar; + } + else if ( supportsService( "com.sun.star.awt.UnoControlScrollBarModel" )) + { + return SdrObjKind::BasicDialogHorizontalScrollbar; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFixedLineModel" )) + { + return SdrObjKind::BasicDialogHorizontalFixedLine; + } + else if ( supportsService( "com.sun.star.awt.UnoControlDateFieldModel" )) + { + return SdrObjKind::BasicDialogDateField; + } + else if ( supportsService( "com.sun.star.awt.UnoControlTimeFieldModel" )) + { + return SdrObjKind::BasicDialogTimeField; + } + else if ( supportsService( "com.sun.star.awt.UnoControlNumericFieldModel" )) + { + return SdrObjKind::BasicDialogNumericField; + } + else if ( supportsService( "com.sun.star.awt.UnoControlCurrencyFieldModel" )) + { + return SdrObjKind::BasicDialogCurencyField; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFormattedFieldModel" )) + { + return SdrObjKind::BasicDialogFormattedField; + } + else if ( supportsService( "com.sun.star.awt.UnoControlPatternFieldModel" )) + { + return SdrObjKind::BasicDialogPatternField; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFileControlModel" )) + { + return SdrObjKind::BasicDialogFileControl; + } + else if ( supportsService( "com.sun.star.awt.tree.TreeControlModel" )) + { + return SdrObjKind::BasicDialogTreeControl; + } + else if ( supportsService( "com.sun.star.awt.grid.UnoControlGridModel" )) + { + return SdrObjKind::BasicDialogGridControl; + } + else if ( supportsService( "com.sun.star.awt.UnoControlFixedHyperlinkModel" )) + { + return SdrObjKind::BasicDialogHyperlinkControl; + } + else + { + return SdrObjKind::BasicDialogControl; + } +} + +DlgEdObj* DlgEdObj::CloneSdrObject(SdrModel& rTargetModel) const +{ + return new DlgEdObj(rTargetModel, *this); +} + +SdrObjectUniquePtr DlgEdObj::getFullDragClone() const +{ + // no need to really add the clone for dragging, it's a temporary + // object + return SdrObjectUniquePtr(new SdrUnoObj(getSdrModelFromSdrObject(), *this)); +} + +void DlgEdObj::NbcMove( const Size& rSize ) +{ + SdrUnoObj::NbcMove( rSize ); + + // stop listening + EndListening(false); + + // set geometry properties + SetPropsFromRect(); + + // start listening + StartListening(); + + // dialog model changed + GetDlgEdForm()->GetDlgEditor().SetDialogModelChanged(); +} + +void DlgEdObj::NbcResize(const Point& rRef, const Fraction& xFract, const Fraction& yFract) +{ + SdrUnoObj::NbcResize( rRef, xFract, yFract ); + + // stop listening + EndListening(false); + + // set geometry properties + SetPropsFromRect(); + + // start listening + StartListening(); + + // dialog model changed + GetDlgEdForm()->GetDlgEditor().SetDialogModelChanged(); +} + +bool DlgEdObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) +{ + bool bResult = SdrUnoObj::EndCreate(rStat, eCmd); + + // tdf#120674 after interactive creation, the SdrObject (this) has no SdrPage yet + // due to not being inserted. Usually this should be handled in a ::handlePageChange + // implementation. For historical reasons, the SdrPage (which is the DlgEdPage) was + // already set. For now, get it from the SdrDragStat and use it to access and set + // the local pDlgEdForm + if(nullptr == pDlgEdForm && nullptr != rStat.GetPageView()) + { + const DlgEdPage* pDlgEdPage(dynamic_cast<const DlgEdPage*>(rStat.GetPageView()->GetPage())); + + if(nullptr != pDlgEdPage) + { + // set parent form + pDlgEdForm = pDlgEdPage->GetDlgEdForm(); + } + } + + SetDefaults(); + StartListening(); + + return bResult; +} + +void DlgEdObj::SetDefaults() +{ + if ( !pDlgEdForm ) + return; + + // add child to parent form + pDlgEdForm->AddChild( this ); + + Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY ); + if ( xPSet.is() ) + { + // get unique name + OUString aOUniqueName( GetUniqueName() ); + + // set name property + xPSet->setPropertyValue( DLGED_PROP_NAME, Any(aOUniqueName) ); + + // set labels + if ( supportsService( "com.sun.star.awt.UnoControlButtonModel" ) || + supportsService( "com.sun.star.awt.UnoControlRadioButtonModel" ) || + supportsService( "com.sun.star.awt.UnoControlCheckBoxModel" ) || + supportsService( "com.sun.star.awt.UnoControlGroupBoxModel" ) || + supportsService( "com.sun.star.awt.UnoControlFixedTextModel" ) ) + { + xPSet->setPropertyValue( DLGED_PROP_LABEL, Any(aOUniqueName) ); + } + + // set number formats supplier for formatted field + if ( supportsService( "com.sun.star.awt.UnoControlFormattedFieldModel" ) ) + { + Reference< util::XNumberFormatsSupplier > xSupplier = GetDlgEdForm()->GetDlgEditor().GetNumberFormatsSupplier(); + if ( xSupplier.is() ) + { + xPSet->setPropertyValue( DLGED_PROP_FORMATSSUPPLIER, Any(xSupplier) ); + } + } + + // set geometry properties + SetPropsFromRect(); + + Reference< container::XNameContainer > xCont( GetDlgEdForm()->GetUnoControlModel() , UNO_QUERY ); + if ( xCont.is() ) + { + // set tabindex + Sequence< OUString > aNames = xCont->getElementNames(); + uno::Any aTabIndex; + aTabIndex <<= static_cast<sal_Int16>(aNames.getLength()); + xPSet->setPropertyValue( DLGED_PROP_TABINDEX, aTabIndex ); + + // set step + Reference< beans::XPropertySet > xPSetForm( xCont, UNO_QUERY ); + if ( xPSetForm.is() ) + { + Any aStep = xPSetForm->getPropertyValue( DLGED_PROP_STEP ); + xPSet->setPropertyValue( DLGED_PROP_STEP, aStep ); + } + + // insert control model in dialog model + Reference< awt::XControlModel > xCtrl( xPSet , UNO_QUERY ); + Any aAny; + aAny <<= xCtrl; + xCont->insertByName( aOUniqueName , aAny ); + + LocalizationMgr::setControlResourceIDsForNewEditorObject( + &GetDialogEditor(), aAny, aOUniqueName + ); + + pDlgEdForm->UpdateTabOrderAndGroups(); + } + } + + // dialog model changed + pDlgEdForm->GetDlgEditor().SetDialogModelChanged(); +} + +void DlgEdObj::StartListening() +{ + DBG_ASSERT(!isListening(), "DlgEdObj::StartListening: already listening!"); + + if (isListening()) + return; + + bIsListening = true; + + // XPropertyChangeListener + Reference< XPropertySet > xControlModel( GetUnoControlModel() , UNO_QUERY ); + if (!m_xPropertyChangeListener.is() && xControlModel.is()) + { + // create listener + m_xPropertyChangeListener = new DlgEdPropListenerImpl(*this); + + // register listener to properties + xControlModel->addPropertyChangeListener( OUString() , m_xPropertyChangeListener ); + } + + // XContainerListener + Reference< XScriptEventsSupplier > xEventsSupplier( GetUnoControlModel() , UNO_QUERY ); + if( !m_xContainerListener.is() && xEventsSupplier.is() ) + { + // create listener + m_xContainerListener = new DlgEdEvtContListenerImpl(*this); + + // register listener to script event container + Reference< XNameContainer > xEventCont = xEventsSupplier->getEvents(); + DBG_ASSERT(xEventCont.is(), "DlgEdObj::StartListening: control model has no script event container!"); + Reference< XContainer > xCont( xEventCont , UNO_QUERY ); + if (xCont.is()) + xCont->addContainerListener( m_xContainerListener ); + } +} + +void DlgEdObj::EndListening(bool bRemoveListener) +{ + DBG_ASSERT(isListening(), "DlgEdObj::EndListening: not listening currently!"); + + if (!isListening()) + return; + + bIsListening = false; + + if (!bRemoveListener) + return; + + // XPropertyChangeListener + Reference< XPropertySet > xControlModel(GetUnoControlModel(), UNO_QUERY); + if ( m_xPropertyChangeListener.is() && xControlModel.is() ) + { + // remove listener + xControlModel->removePropertyChangeListener( OUString() , m_xPropertyChangeListener ); + } + m_xPropertyChangeListener.clear(); + + // XContainerListener + Reference< XScriptEventsSupplier > xEventsSupplier( GetUnoControlModel() , UNO_QUERY ); + if( m_xContainerListener.is() && xEventsSupplier.is() ) + { + // remove listener + Reference< XNameContainer > xEventCont = xEventsSupplier->getEvents(); + DBG_ASSERT(xEventCont.is(), "DlgEdObj::EndListening: control model has no script event container!"); + Reference< XContainer > xCont( xEventCont , UNO_QUERY ); + if (xCont.is()) + xCont->removeContainerListener( m_xContainerListener ); + } + m_xContainerListener.clear(); +} + +void DlgEdObj::_propertyChange( const css::beans::PropertyChangeEvent& evt ) +{ + if (!isListening()) + return; + + DlgEdForm* pRealDlgEdForm = dynamic_cast<DlgEdForm*>(this); + if (!pRealDlgEdForm) + pRealDlgEdForm = GetDlgEdForm(); + if (!pRealDlgEdForm) + return; + DlgEditor& rDlgEditor = pRealDlgEdForm->GetDlgEditor(); + if (rDlgEditor.isInPaint()) + return; + + // dialog model changed + rDlgEditor.SetDialogModelChanged(); + + // update position and size + if ( evt.PropertyName == DLGED_PROP_POSITIONX || evt.PropertyName == DLGED_PROP_POSITIONY || + evt.PropertyName == DLGED_PROP_WIDTH || evt.PropertyName == DLGED_PROP_HEIGHT || + evt.PropertyName == DLGED_PROP_DECORATION ) + { + PositionAndSizeChange( evt ); + + if ( evt.PropertyName == DLGED_PROP_DECORATION ) + GetDialogEditor().ResetDialog(); + } + // change name of control in dialog model + else if ( evt.PropertyName == DLGED_PROP_NAME ) + { + if (!dynamic_cast<DlgEdForm*>(this)) + { + try + { + NameChange(evt); + } + catch (container::NoSuchElementException const&) + { + css::uno::Any anyEx = cppu::getCaughtException(); + throw lang::WrappedTargetRuntimeException("", nullptr, + anyEx); + } + } + } + // update step + else if ( evt.PropertyName == DLGED_PROP_STEP ) + { + UpdateStep(); + } + // change tabindex + else if ( evt.PropertyName == DLGED_PROP_TABINDEX ) + { + if (!dynamic_cast<DlgEdForm*>(this)) + TabIndexChange(evt); + } +} + +void DlgEdObj::_elementInserted() +{ + if (isListening()) + { + // dialog model changed + GetDialogEditor().SetDialogModelChanged(); + } +} + +void DlgEdObj::_elementReplaced() +{ + if (isListening()) + { + // dialog model changed + GetDialogEditor().SetDialogModelChanged(); + } +} + +void DlgEdObj::_elementRemoved() +{ + if (isListening()) + { + // dialog model changed + GetDialogEditor().SetDialogModelChanged(); + } +} + +void DlgEdObj::SetLayer(SdrLayerID nLayer) +{ + SdrLayerID nOldLayer = GetLayer(); + + if ( nLayer != nOldLayer ) + { + SdrUnoObj::SetLayer( nLayer ); + + DlgEdHint aHint( DlgEdHint::LAYERCHANGED, this ); + GetDlgEdForm()->GetDlgEditor().Broadcast( aHint ); + } +} + +DlgEdForm::DlgEdForm( + SdrModel& rSdrModel, + DlgEditor& rDlgEditor_) +: DlgEdObj(rSdrModel), + rDlgEditor(rDlgEditor_) +{ +} + +DlgEdForm::~DlgEdForm() +{ +} + +void DlgEdForm::SetRectFromProps() +{ + // get form position and size from properties + Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY ); + if ( !xPSet.is() ) + return; + + sal_Int32 nXIn = 0, nYIn = 0, nWidthIn = 0, nHeightIn = 0; + xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nXIn; + xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nYIn; + xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidthIn; + xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeightIn; + + // transform coordinates + sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut; + if ( TransformFormToSdrCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) ) + { + // set rectangle position and size + Point aPoint( nXOut, nYOut ); + Size aSize( nWidthOut, nHeightOut ); + SetSnapRect( tools::Rectangle( aPoint, aSize ) ); + } +} + +void DlgEdForm::SetPropsFromRect() +{ + // get form position and size from rectangle + tools::Rectangle aRect_ = GetSnapRect(); + sal_Int32 nXIn = aRect_.Left(); + sal_Int32 nYIn = aRect_.Top(); + sal_Int32 nWidthIn = aRect_.GetWidth(); + sal_Int32 nHeightIn = aRect_.GetHeight(); + + // transform coordinates + sal_Int32 nXOut, nYOut, nWidthOut, nHeightOut; + if ( TransformSdrToFormCoordinates( nXIn, nYIn, nWidthIn, nHeightIn, nXOut, nYOut, nWidthOut, nHeightOut ) ) + { + // set properties + Reference< beans::XPropertySet > xPSet( GetUnoControlModel(), UNO_QUERY ); + if ( xPSet.is() ) + { + xPSet->setPropertyValue( DLGED_PROP_POSITIONX, Any(nXOut) ); + xPSet->setPropertyValue( DLGED_PROP_POSITIONY, Any(nYOut) ); + xPSet->setPropertyValue( DLGED_PROP_WIDTH, Any(nWidthOut) ); + xPSet->setPropertyValue( DLGED_PROP_HEIGHT, Any(nHeightOut) ); + } + } +} + +void DlgEdForm::AddChild( DlgEdObj* pDlgEdObj ) +{ + pChildren.push_back( pDlgEdObj ); +} + +void DlgEdForm::RemoveChild( DlgEdObj* pDlgEdObj ) +{ + pChildren.erase( std::remove( pChildren.begin() , pChildren.end() , pDlgEdObj ) ); +} + +void DlgEdForm::PositionAndSizeChange( const beans::PropertyChangeEvent& evt ) +{ + DlgEditor& rEditor = GetDlgEditor(); + DlgEdPage& rPage = rEditor.GetPage(); + + sal_Int32 nPageXIn = 0; + sal_Int32 nPageYIn = 0; + Size aPageSize = rPage.GetSize(); + sal_Int32 nPageWidthIn = aPageSize.Width(); + sal_Int32 nPageHeightIn = aPageSize.Height(); + sal_Int32 nPageX, nPageY, nPageWidth, nPageHeight; + if ( TransformSdrToFormCoordinates( nPageXIn, nPageYIn, nPageWidthIn, nPageHeightIn, nPageX, nPageY, nPageWidth, nPageHeight ) ) + { + Reference< beans::XPropertySet > xPSetForm( GetUnoControlModel(), UNO_QUERY ); + if ( xPSetForm.is() ) + { + sal_Int32 nValue = 0; + evt.NewValue >>= nValue; + sal_Int32 nNewValue = nValue; + + if ( evt.PropertyName == DLGED_PROP_POSITIONX ) + { + if ( nNewValue < nPageX ) + nNewValue = nPageX; + } + else if ( evt.PropertyName == DLGED_PROP_POSITIONY ) + { + if ( nNewValue < nPageY ) + nNewValue = nPageY; + } + else if ( evt.PropertyName == DLGED_PROP_WIDTH ) + { + if ( nNewValue < 1 ) + nNewValue = 1; + } + else if ( evt.PropertyName == DLGED_PROP_HEIGHT ) + { + if ( nNewValue < 1 ) + nNewValue = 1; + } + + if ( nNewValue != nValue ) + { + EndListening( false ); + xPSetForm->setPropertyValue( evt.PropertyName, Any(nNewValue) ); + StartListening(); + } + } + } + + bool bAdjustedPageSize = rEditor.AdjustPageSize(); + SetRectFromProps(); + std::vector<DlgEdObj*> const& aChildList = GetChildren(); + + if ( bAdjustedPageSize ) + { + rEditor.InitScrollBars(); + aPageSize = rPage.GetSize(); + nPageWidthIn = aPageSize.Width(); + nPageHeightIn = aPageSize.Height(); + if ( TransformSdrToControlCoordinates( nPageXIn, nPageYIn, nPageWidthIn, nPageHeightIn, nPageX, nPageY, nPageWidth, nPageHeight ) ) + { + for (auto const& child : aChildList) + { + Reference< beans::XPropertySet > xPSet( child->GetUnoControlModel(), UNO_QUERY ); + if ( xPSet.is() ) + { + sal_Int32 nX = 0, nY = 0, nWidth = 0, nHeight = 0; + xPSet->getPropertyValue( DLGED_PROP_POSITIONX ) >>= nX; + xPSet->getPropertyValue( DLGED_PROP_POSITIONY ) >>= nY; + xPSet->getPropertyValue( DLGED_PROP_WIDTH ) >>= nWidth; + xPSet->getPropertyValue( DLGED_PROP_HEIGHT ) >>= nHeight; + + sal_Int32 nNewX = nX; + if ( nX + nWidth > nPageX + nPageWidth ) + { + nNewX = nPageX + nPageWidth - nWidth; + if ( nNewX < nPageX ) + nNewX = nPageX; + } + if ( nNewX != nX ) + { + EndListening( false ); + xPSet->setPropertyValue( DLGED_PROP_POSITIONX, Any(nNewX) ); + StartListening(); + } + + sal_Int32 nNewY = nY; + if ( nY + nHeight > nPageY + nPageHeight ) + { + nNewY = nPageY + nPageHeight - nHeight; + if ( nNewY < nPageY ) + nNewY = nPageY; + } + if ( nNewY != nY ) + { + EndListening( false ); + xPSet->setPropertyValue( DLGED_PROP_POSITIONY, Any(nNewY) ); + StartListening(); + } + } + } + } + } + + for (auto const& child : aChildList) + child->SetRectFromProps(); +} + +void DlgEdForm::UpdateStep() +{ + SdrPage* pSdrPage = getSdrPageFromSdrObject(); + + if ( pSdrPage ) + { + const size_t nObjCount = pSdrPage->GetObjCount(); + for ( size_t i = 0 ; i < nObjCount ; i++ ) + { + DlgEdObj* pDlgEdObj = dynamic_cast<DlgEdObj*>(pSdrPage->GetObj(i)); + if (pDlgEdObj && !dynamic_cast<DlgEdForm*>(pDlgEdObj)) + pDlgEdObj->UpdateStep(); + } + } +} + +void DlgEdForm::UpdateTabIndices() +{ + // stop listening with all children + for (auto const& child : pChildren) + { + child->EndListening( false ); + } + + Reference< css::container::XNameAccess > xNameAcc( GetUnoControlModel() , UNO_QUERY ); + if ( xNameAcc.is() ) + { + // get sequence of control names + Sequence< OUString > aNames = xNameAcc->getElementNames(); + const OUString* pNames = aNames.getConstArray(); + sal_Int32 nCtrls = aNames.getLength(); + + // create a map of tab indices and control names, sorted by tab index + IndexToNameMap aIndexToNameMap; + for ( sal_Int32 i = 0; i < nCtrls; ++i ) + { + // get name + OUString aName( pNames[i] ); + + // get tab index + sal_Int16 nTabIndex = -1; + Any aCtrl = xNameAcc->getByName( aName ); + Reference< css::beans::XPropertySet > xPSet; + aCtrl >>= xPSet; + if ( xPSet.is() ) + xPSet->getPropertyValue( DLGED_PROP_TABINDEX ) >>= nTabIndex; + + // insert into map + aIndexToNameMap.emplace( nTabIndex, aName ); + } + + // set new tab indices + sal_Int16 nNewTabIndex = 0; + for (auto const& indexToName : aIndexToNameMap) + { + Any aCtrl = xNameAcc->getByName( indexToName.second ); + Reference< beans::XPropertySet > xPSet; + aCtrl >>= xPSet; + if ( xPSet.is() ) + { + xPSet->setPropertyValue( DLGED_PROP_TABINDEX, Any(nNewTabIndex) ); + nNewTabIndex++; + } + } + + UpdateTabOrderAndGroups(); + } + + // start listening with all children + for (auto const& child : pChildren) + { + child->StartListening(); + } +} + +void DlgEdForm::UpdateTabOrder() +{ + // When the tabindex of a control model changes, the dialog control is + // notified about those changes. Due to #109067# (bad performance of + // dialog editor) the dialog control doesn't activate the tab order + // in design mode. When the dialog editor has reordered all + // tabindices, this method allows to activate the taborder afterwards. + + Reference< awt::XUnoControlContainer > xCont( GetControl(), UNO_QUERY ); + if ( xCont.is() ) + { + Sequence< Reference< awt::XTabController > > aSeqTabCtrls = xCont->getTabControllers(); + const Reference< awt::XTabController >* pTabCtrls = aSeqTabCtrls.getConstArray(); + sal_Int32 nCount = aSeqTabCtrls.getLength(); + for ( sal_Int32 i = 0; i < nCount; ++i ) + pTabCtrls[i]->activateTabOrder(); + } +} + +void DlgEdForm::UpdateGroups() +{ + // The grouping of radio buttons in a dialog is done by vcl. + // In the dialog editor we have two views (=controls) for one + // radio button model. One control is owned by the dialog control, + // but not visible in design mode. The other control is owned by + // the drawing layer object. Whereas the grouping of the first + // control is done by vcl, the grouping of the control in the + // drawing layer has to be done here. + + Reference< awt::XTabControllerModel > xTabModel( GetUnoControlModel() , UNO_QUERY ); + if ( !xTabModel.is() ) + return; + + // create a global list of controls that belong to the dialog + std::vector<DlgEdObj*> aChildList = GetChildren(); + sal_uInt32 nSize = aChildList.size(); + Sequence< Reference< awt::XControl > > aSeqControls( nSize ); + for ( sal_uInt32 i = 0; i < nSize; ++i ) + aSeqControls.getArray()[i] = aChildList[i]->GetControl(); + + sal_Int32 nGroupCount = xTabModel->getGroupCount(); + for ( sal_Int32 nGroup = 0; nGroup < nGroupCount; ++nGroup ) + { + // get a list of control models that belong to this group + OUString aName; + Sequence< Reference< awt::XControlModel > > aSeqModels; + xTabModel->getGroup( nGroup, aSeqModels, aName ); + const Reference< awt::XControlModel >* pModels = aSeqModels.getConstArray(); + sal_Int32 nModelCount = aSeqModels.getLength(); + + // create a list of peers that belong to this group + Sequence< Reference< awt::XWindow > > aSeqPeers( nModelCount ); + for ( sal_Int32 nModel = 0; nModel < nModelCount; ++nModel ) + { + // for each control model find the corresponding control in the global list + const Reference< awt::XControl >* pControls = aSeqControls.getConstArray(); + sal_Int32 nControlCount = aSeqControls.getLength(); + for ( sal_Int32 nControl = 0; nControl < nControlCount; ++nControl ) + { + const Reference< awt::XControl > xCtrl( pControls[nControl] ); + if ( xCtrl.is() ) + { + Reference< awt::XControlModel > xCtrlModel( xCtrl->getModel() ); + if ( xCtrlModel.get() == pModels[nModel].get() ) + { + // get the control peer and insert into the list of peers + aSeqPeers.getArray()[ nModel ].set( xCtrl->getPeer(), UNO_QUERY ); + break; + } + } + } + } + + // set the group at the dialog peer + Reference< awt::XControl > xDlg = GetControl(); + if ( xDlg.is() ) + { + Reference< awt::XVclContainerPeer > xDlgPeer( xDlg->getPeer(), UNO_QUERY ); + if ( xDlgPeer.is() ) + xDlgPeer->setGroup( aSeqPeers ); + } + } +} + +void DlgEdForm::UpdateTabOrderAndGroups() +{ + UpdateTabOrder(); + UpdateGroups(); +} + +void DlgEdForm::NbcMove( const Size& rSize ) +{ + SdrUnoObj::NbcMove( rSize ); + + // set geometry properties of form + EndListening(false); + SetPropsFromRect(); + StartListening(); + + // set geometry properties of all children + for (auto const& child : pChildren) + { + child->EndListening(false); + child->SetPropsFromRect(); + child->StartListening(); + } + + // dialog model changed + GetDlgEditor().SetDialogModelChanged(); +} + +void DlgEdForm::NbcResize(const Point& rRef, const Fraction& xFract, const Fraction& yFract) +{ + SdrUnoObj::NbcResize( rRef, xFract, yFract ); + + // set geometry properties of form + EndListening(false); + SetPropsFromRect(); + StartListening(); + + // set geometry properties of all children + for (auto const& child : pChildren) + { + child->EndListening(false); + child->SetPropsFromRect(); + child->StartListening(); + } + + // dialog model changed + GetDlgEditor().SetDialogModelChanged(); +} + +bool DlgEdForm::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) +{ + bool bResult = SdrUnoObj::EndCreate(rStat, eCmd); + + // stop listening + EndListening(false); + + // set geometry properties + SetPropsFromRect(); + + // dialog model changed + GetDlgEditor().SetDialogModelChanged(); + + // start listening + StartListening(); + + return bResult; +} + +awt::DeviceInfo DlgEdForm::getDeviceInfo() const +{ + awt::DeviceInfo aDeviceInfo; + + DlgEditor& rEditor = GetDlgEditor(); + vcl::Window& rWindow = rEditor.GetWindow(); + + // obtain an XControl + ::utl::SharedUNOComponent< awt::XControl > xDialogControl; // ensures auto-disposal, if needed + xDialogControl.reset( GetControl(), ::utl::SharedUNOComponent< awt::XControl >::NoTakeOwnership ); + if ( !xDialogControl.is() ) + { + // don't create a temporary control all the time, this method here is called + // way too often. Instead, use a cached DeviceInfo. + // #i74065# + if ( !!mpDeviceInfo ) + return *mpDeviceInfo; + + Reference< awt::XControlContainer > xEditorControlContainer( rEditor.GetWindowControlContainer() ); + xDialogControl.reset( + GetTemporaryControlForWindow(rWindow, xEditorControlContainer), + utl::SharedUNOComponent< awt::XControl >::TakeOwnership + ); + } + + Reference< awt::XDevice > xDialogDevice; + if ( xDialogControl.is() ) + xDialogDevice.set( xDialogControl->getPeer(), UNO_QUERY ); + DBG_ASSERT( xDialogDevice.is(), "DlgEdForm::getDeviceInfo: no device!" ); + if ( xDialogDevice.is() ) + aDeviceInfo = xDialogDevice->getInfo(); + + mpDeviceInfo = aDeviceInfo; + + return aDeviceInfo; +} +void DlgEdObj::MakeDataAware( const Reference< frame::XModel >& xModel ) +{ + // Need to flesh this out, currently we will only support data-aware controls for calc + // and only handle a subset of functionality e.g. linked-cell and cell range data source. Of course later + // we need to disambiguate for writer ( and others ? ) and also support the generic form (db) bindings + // we need some more work in xmlscript to be able to handle that + Reference< lang::XMultiServiceFactory > xFac( xModel, UNO_QUERY ); + Reference< form::binding::XBindableValue > xBindable( GetUnoControlModel(), UNO_QUERY ); + Reference< form::binding::XListEntrySink > xListEntrySink( GetUnoControlModel(), UNO_QUERY ); + if ( !xFac.is() ) + return; + + css::table::CellAddress aApiAddress; + + //tdf#90361 CellValueBinding and CellRangeListSource are unusable + //without being initialized, so use createInstanceWithArguments with a + //dummy BoundCell instead of createInstance. This at least results in + //the dialog editor not falling. + css::beans::NamedValue aValue; + aValue.Name = "BoundCell"; + aValue.Value <<= aApiAddress; + + Sequence< Any > aArgs{ Any(aValue) }; + + if ( xBindable.is() ) + { + Reference< form::binding::XValueBinding > xBinding( xFac->createInstanceWithArguments( "com.sun.star.table.CellValueBinding", aArgs ), UNO_QUERY ); + xBindable->setValueBinding( xBinding ); + } + if ( xListEntrySink.is() ) + { + Reference< form::binding::XListEntrySource > xSource( xFac->createInstanceWithArguments( "com.sun.star.table.CellRangeListSource", aArgs ), UNO_QUERY ); + xListEntrySink->setListEntrySource( xSource ); + } +} +} // namespace basctl + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |