diff options
Diffstat (limited to 'basic/source/comp/exprgen.cxx')
-rw-r--r-- | basic/source/comp/exprgen.cxx | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/basic/source/comp/exprgen.cxx b/basic/source/comp/exprgen.cxx new file mode 100644 index 000000000..76f1ab776 --- /dev/null +++ b/basic/source/comp/exprgen.cxx @@ -0,0 +1,281 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <basic/sberrors.hxx> + +#include <codegen.hxx> +#include <expr.hxx> +#include <parser.hxx> + +// Transform table for token operators and opcodes + +namespace { + +struct OpTable { + SbiToken eTok; // Token + SbiOpcode eOp; // Opcode +}; + +} + +const OpTable aOpTable [] = { + { EXPON,SbiOpcode::EXP_ }, + { MUL, SbiOpcode::MUL_ }, + { DIV, SbiOpcode::DIV_ }, + { IDIV, SbiOpcode::IDIV_ }, + { MOD, SbiOpcode::MOD_ }, + { PLUS, SbiOpcode::PLUS_ }, + { MINUS,SbiOpcode::MINUS_ }, + { EQ, SbiOpcode::EQ_ }, + { NE, SbiOpcode::NE_ }, + { LE, SbiOpcode::LE_ }, + { GE, SbiOpcode::GE_ }, + { LT, SbiOpcode::LT_ }, + { GT, SbiOpcode::GT_ }, + { AND, SbiOpcode::AND_ }, + { OR, SbiOpcode::OR_ }, + { XOR, SbiOpcode::XOR_ }, + { EQV, SbiOpcode::EQV_ }, + { IMP, SbiOpcode::IMP_ }, + { NOT, SbiOpcode::NOT_ }, + { NEG, SbiOpcode::NEG_ }, + { CAT, SbiOpcode::CAT_ }, + { LIKE, SbiOpcode::LIKE_ }, + { IS, SbiOpcode::IS_ }, + { NIL, SbiOpcode::NOP_ }}; + +// Output of an element +void SbiExprNode::Gen( SbiCodeGen& rGen, RecursiveMode eRecMode ) +{ + sal_uInt16 nStringId; + + if( IsConstant() ) + { + switch( GetType() ) + { + case SbxEMPTY: + rGen.Gen( SbiOpcode::EMPTY_ ); + break; + case SbxSTRING: + nStringId = rGen.GetParser()->aGblStrings.Add( aStrVal ); + rGen.Gen( SbiOpcode::SCONST_, nStringId ); + break; + default: + // tdf#131296 - generate SbiOpcode::NUMBER_ instead of SbiOpcode::CONST_ + // for SbxINTEGER and SbxLONG including their numeric value and its data type, + // which will be restored in SbiRuntime::StepLOADNC. + nStringId = rGen.GetParser()->aGblStrings.Add( nVal, eType ); + rGen.Gen( SbiOpcode::NUMBER_, nStringId ); + break; + } + } + else if( IsOperand() ) + { + SbiExprNode* pWithParent_ = nullptr; + SbiOpcode eOp; + if( aVar.pDef->GetScope() == SbPARAM ) + { + eOp = SbiOpcode::PARAM_; + if( aVar.pDef->GetPos() == 0 ) + { + bool bTreatFunctionAsParam = true; + if( eRecMode == FORCE_CALL ) + { + bTreatFunctionAsParam = false; + } + else if( eRecMode == UNDEFINED ) + { + if( aVar.pPar && aVar.pPar->IsBracket() ) + { + bTreatFunctionAsParam = false; + } + } + if( !bTreatFunctionAsParam ) + { + eOp = aVar.pDef->IsGlobal() ? SbiOpcode::FIND_G_ : SbiOpcode::FIND_; + } + } + } + // special treatment for WITH + else if( (pWithParent_ = pWithParent) != nullptr ) + { + eOp = SbiOpcode::ELEM_; // .-Term in WITH + } + else + { + eOp = ( aVar.pDef->GetScope() == SbRTL ) ? SbiOpcode::RTL_ : + (aVar.pDef->IsGlobal() ? SbiOpcode::FIND_G_ : SbiOpcode::FIND_); + } + + if( eOp == SbiOpcode::FIND_ ) + { + + SbiProcDef* pProc = aVar.pDef->GetProcDef(); + if ( rGen.GetParser()->bClassModule ) + { + eOp = SbiOpcode::FIND_CM_; + } + else if ( aVar.pDef->IsStatic() || (pProc && pProc->IsStatic()) ) + { + eOp = SbiOpcode::FIND_STATIC_; + } + } + for( SbiExprNode* p = this; p; p = p->aVar.pNext ) + { + if( p == this && pWithParent_ != nullptr ) + { + pWithParent_->Gen(rGen); + } + p->GenElement( rGen, eOp ); + eOp = SbiOpcode::ELEM_; + } + } + else if( eNodeType == SbxTYPEOF ) + { + pLeft->Gen(rGen); + rGen.Gen( SbiOpcode::TESTCLASS_, nTypeStrId ); + } + else if( eNodeType == SbxNEW ) + { + rGen.Gen( SbiOpcode::CREATE_, 0, nTypeStrId ); + } + else + { + pLeft->Gen(rGen); + if( pRight ) + { + pRight->Gen(rGen); + } + for( const OpTable* p = aOpTable; p->eTok != NIL; p++ ) + { + if( p->eTok == eTok ) + { + rGen.Gen( p->eOp ); break; + } + } + } +} + +// Output of an operand element + +void SbiExprNode::GenElement( SbiCodeGen& rGen, SbiOpcode eOp ) +{ +#ifdef DBG_UTIL + if ((eOp < SbiOpcode::RTL_ || eOp > SbiOpcode::CALLC_) && eOp != SbiOpcode::FIND_G_ && eOp != SbiOpcode::FIND_CM_ && eOp != SbiOpcode::FIND_STATIC_) + rGen.GetParser()->Error( ERRCODE_BASIC_INTERNAL_ERROR, "Opcode" ); +#endif + SbiSymDef* pDef = aVar.pDef; + // The ID is either the position or the String-ID + // If the bit Bit 0x8000 is set, the variable have + // a parameter list. + sal_uInt16 nId = ( eOp == SbiOpcode::PARAM_ ) ? pDef->GetPos() : pDef->GetId(); + // Build a parameter list + if( aVar.pPar && aVar.pPar->GetSize() ) + { + nId |= 0x8000; + aVar.pPar->Gen(rGen); + } + + rGen.Gen( eOp, nId, sal::static_int_cast< sal_uInt16 >( GetType() ) ); + + if( aVar.pvMorePar ) + { + for( auto& pExprList: *aVar.pvMorePar ) + { + pExprList->Gen(rGen); + rGen.Gen( SbiOpcode::ARRAYACCESS_ ); + } + } +} + +// Create an Argv-Table +// The first element remain available for return value etc. +// See as well SbiProcDef::SbiProcDef() in symtbl.cxx + +void SbiExprList::Gen(SbiCodeGen& rGen) +{ + if( aData.empty() ) + return; + + rGen.Gen( SbiOpcode::ARGC_ ); + // Type adjustment at DECLARE + + for( auto& pExpr: aData ) + { + pExpr->Gen(); + if( !pExpr->GetName().isEmpty() ) + { + // named arg + sal_uInt16 nSid = rGen.GetParser()->aGblStrings.Add( pExpr->GetName() ); + rGen.Gen( SbiOpcode::ARGN_, nSid ); + + /* TODO: Check after Declare concept change + // From 1996-01-10: Type adjustment at named -> search suitable parameter + if( pProc ) + { + // For the present: trigger an error + pParser->Error( ERRCODE_BASIC_NO_NAMED_ARGS ); + + // Later, if Named Args at DECLARE is possible + //for( sal_uInt16 i = 1 ; i < nParAnz ; i++ ) + //{ + // SbiSymDef* pDef = pPool->Get( i ); + // const String& rName = pDef->GetName(); + // if( rName.Len() ) + // { + // if( pExpr->GetName().ICompare( rName ) + // == COMPARE_EQUAL ) + // { + // pParser->aGen.Gen( ARGTYP_, pDef->GetType() ); + // break; + // } + // } + //} + } + */ + } + else + { + rGen.Gen( SbiOpcode::ARGV_ ); + } + } +} + +void SbiExpression::Gen( RecursiveMode eRecMode ) +{ + // special treatment for WITH + // If pExpr == .-term in With, approximately Gen for Basis-Object + pExpr->Gen( pParser->aGen, eRecMode ); + if( bByVal ) + { + pParser->aGen.Gen( SbiOpcode::BYVAL_ ); + } + if( bBased ) + { + sal_uInt16 uBase = pParser->nBase; + if( pParser->IsCompatible() ) + { + uBase |= 0x8000; // #109275 Flag compatibility + } + pParser->aGen.Gen( SbiOpcode::BASED_, uBase ); + pParser->aGen.Gen( SbiOpcode::ARGV_ ); + } +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |