diff options
Diffstat (limited to 'drawinglayer/source/primitive3d/sdrextrudelathetools3d.cxx')
| -rw-r--r-- | drawinglayer/source/primitive3d/sdrextrudelathetools3d.cxx | 982 |
1 files changed, 982 insertions, 0 deletions
diff --git a/drawinglayer/source/primitive3d/sdrextrudelathetools3d.cxx b/drawinglayer/source/primitive3d/sdrextrudelathetools3d.cxx new file mode 100644 index 000000000..a7015ff8e --- /dev/null +++ b/drawinglayer/source/primitive3d/sdrextrudelathetools3d.cxx @@ -0,0 +1,982 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <drawinglayer/primitive3d/sdrextrudelathetools3d.hxx> + +#include <osl/diagnose.h> +#include <basegfx/polygon/b2dpolypolygon.hxx> +#include <basegfx/range/b2drange.hxx> +#include <basegfx/polygon/b2dpolypolygontools.hxx> +#include <basegfx/matrix/b2dhommatrix.hxx> +#include <basegfx/point/b3dpoint.hxx> +#include <basegfx/polygon/b3dpolygon.hxx> +#include <basegfx/polygon/b3dpolygontools.hxx> +#include <basegfx/polygon/b3dpolypolygontools.hxx> +#include <basegfx/range/b3drange.hxx> +#include <basegfx/matrix/b3dhommatrix.hxx> +#include <basegfx/polygon/b2dpolygontools.hxx> +#include <drawinglayer/geometry/viewinformation3d.hxx> +#include <numeric> + + +// decomposition helpers for extrude/lathe (rotation) objects + +namespace +{ + + // common helpers + + basegfx::B2DPolyPolygon impScalePolyPolygonOnCenter( + const basegfx::B2DPolyPolygon& rSource, + double fScale) + { + basegfx::B2DPolyPolygon aRetval(rSource); + + if(!basegfx::fTools::equalZero(fScale)) + { + const basegfx::B2DRange aRange(basegfx::utils::getRange(rSource)); + const basegfx::B2DPoint aCenter(aRange.getCenter()); + basegfx::B2DHomMatrix aTrans; + + aTrans.translate(-aCenter.getX(), -aCenter.getY()); + aTrans.scale(fScale, fScale); + aTrans.translate(aCenter.getX(), aCenter.getY()); + aRetval.transform(aTrans); + } + + return aRetval; + } + + void impGetOuterPolyPolygon( + basegfx::B2DPolyPolygon& rPolygon, + basegfx::B2DPolyPolygon& rOuterPolyPolygon, + double fOffset, + bool bCharacterMode) + { + rOuterPolyPolygon = rPolygon; + + if(!basegfx::fTools::more(fOffset, 0.0)) + return; + + if(bCharacterMode) + { + // grow the outside polygon and scale all polygons to original size. This is done + // to avoid a shrink which potentially would lead to self-intersections, but changes + // the original polygon -> not a precision step, so e.g. not usable for charts + const basegfx::B2DRange aRange(basegfx::utils::getRange(rPolygon)); + rPolygon = basegfx::utils::growInNormalDirection(rPolygon, fOffset); + const basegfx::B2DRange aGrownRange(basegfx::utils::getRange(rPolygon)); + const double fScaleX(basegfx::fTools::equalZero(aGrownRange.getWidth()) ? 1.0 : aRange.getWidth() / aGrownRange.getWidth()); + const double fScaleY(basegfx::fTools::equalZero(aGrownRange.getHeight())? 1.0 : aRange.getHeight() / aGrownRange.getHeight()); + basegfx::B2DHomMatrix aScaleTrans; + + aScaleTrans.translate(-aGrownRange.getMinX(), -aGrownRange.getMinY()); + aScaleTrans.scale(fScaleX, fScaleY); + aScaleTrans.translate(aRange.getMinX(), aRange.getMinY()); + rPolygon.transform(aScaleTrans); + rOuterPolyPolygon.transform(aScaleTrans); + } + else + { + // use more precision, shrink the outer polygons. Since this may lead to self-intersections, + // some kind of correction should be applied here after that step + rOuterPolyPolygon = basegfx::utils::growInNormalDirection(rPolygon, -fOffset); + // basegfx::utils::correctGrowShrinkPolygonPair(rPolygon, rOuterPolyPolygon); + } + } + + void impAddInBetweenFill( + basegfx::B3DPolyPolygon& rTarget, + const basegfx::B3DPolyPolygon& rPolA, + const basegfx::B3DPolyPolygon& rPolB, + double fTexVerStart, + double fTexVerStop, + bool bCreateNormals, + bool bCreateTextureCoordinates) + { + OSL_ENSURE(rPolA.count() == rPolB.count(), "impAddInBetweenFill: unequally sized polygons (!)"); + const sal_uInt32 nPolygonCount(std::min(rPolA.count(), rPolB.count())); + + for(sal_uInt32 a(0); a < nPolygonCount; a++) + { + const basegfx::B3DPolygon& aSubA(rPolA.getB3DPolygon(a)); + const basegfx::B3DPolygon& aSubB(rPolB.getB3DPolygon(a)); + OSL_ENSURE(aSubA.count() == aSubB.count(), "impAddInBetweenFill: unequally sized polygons (!)"); + const sal_uInt32 nPointCount(std::min(aSubA.count(), aSubB.count())); + + if(nPointCount) + { + const sal_uInt32 nEdgeCount(aSubA.isClosed() ? nPointCount : nPointCount - 1); + double fTexHorMultiplicatorA(0.0), fTexHorMultiplicatorB(0.0); + double fPolygonPosA(0.0), fPolygonPosB(0.0); + + if(bCreateTextureCoordinates) + { + const double fPolygonLengthA(basegfx::utils::getLength(aSubA)); + fTexHorMultiplicatorA = basegfx::fTools::equalZero(fPolygonLengthA) ? 1.0 : 1.0 / fPolygonLengthA; + + const double fPolygonLengthB(basegfx::utils::getLength(aSubB)); + fTexHorMultiplicatorB = basegfx::fTools::equalZero(fPolygonLengthB) ? 1.0 : 1.0 / fPolygonLengthB; + } + + for(sal_uInt32 b(0); b < nEdgeCount; b++) + { + const sal_uInt32 nIndexA(b); + const sal_uInt32 nIndexB((b + 1) % nPointCount); + + const basegfx::B3DPoint aStartA(aSubA.getB3DPoint(nIndexA)); + const basegfx::B3DPoint aEndA(aSubA.getB3DPoint(nIndexB)); + const basegfx::B3DPoint aStartB(aSubB.getB3DPoint(nIndexA)); + const basegfx::B3DPoint aEndB(aSubB.getB3DPoint(nIndexB)); + + basegfx::B3DPolygon aNew; + aNew.setClosed(true); + + aNew.append(aStartA); + aNew.append(aStartB); + aNew.append(aEndB); + aNew.append(aEndA); + + if(bCreateNormals) + { + aNew.setNormal(0, aSubA.getNormal(nIndexA)); + aNew.setNormal(1, aSubB.getNormal(nIndexA)); + aNew.setNormal(2, aSubB.getNormal(nIndexB)); + aNew.setNormal(3, aSubA.getNormal(nIndexB)); + } + + if(bCreateTextureCoordinates) + { + const double fRelTexAL(fPolygonPosA * fTexHorMultiplicatorA); + const double fEdgeLengthA(basegfx::B3DVector(aEndA - aStartA).getLength()); + fPolygonPosA += fEdgeLengthA; + const double fRelTexAR(fPolygonPosA * fTexHorMultiplicatorA); + + const double fRelTexBL(fPolygonPosB * fTexHorMultiplicatorB); + const double fEdgeLengthB(basegfx::B3DVector(aEndB - aStartB).getLength()); + fPolygonPosB += fEdgeLengthB; + const double fRelTexBR(fPolygonPosB * fTexHorMultiplicatorB); + + aNew.setTextureCoordinate(0, basegfx::B2DPoint(fRelTexAL, fTexVerStart)); + aNew.setTextureCoordinate(1, basegfx::B2DPoint(fRelTexBL, fTexVerStop)); + aNew.setTextureCoordinate(2, basegfx::B2DPoint(fRelTexBR, fTexVerStop)); + aNew.setTextureCoordinate(3, basegfx::B2DPoint(fRelTexAR, fTexVerStart)); + } + + rTarget.append(aNew); + } + } + } + } + + void impSetNormal( + basegfx::B3DPolyPolygon& rCandidate, + const basegfx::B3DVector& rNormal) + { + for(sal_uInt32 a(0); a < rCandidate.count(); a++) + { + basegfx::B3DPolygon aSub(rCandidate.getB3DPolygon(a)); + + for(sal_uInt32 b(0); b < aSub.count(); b++) + { + aSub.setNormal(b, rNormal); + } + + rCandidate.setB3DPolygon(a, aSub); + } + } + + void impCreateInBetweenNormals( + basegfx::B3DPolyPolygon& rPolA, + basegfx::B3DPolyPolygon& rPolB) + { + OSL_ENSURE(rPolA.count() == rPolB.count(), "sdrExtrudePrimitive3D: unequally sized polygons (!)"); + const sal_uInt32 nPolygonCount(std::min(rPolA.count(), rPolB.count())); + + for(sal_uInt32 a(0); a < nPolygonCount; a++) + { + basegfx::B3DPolygon aSubA(rPolA.getB3DPolygon(a)); + basegfx::B3DPolygon aSubB(rPolB.getB3DPolygon(a)); + OSL_ENSURE(aSubA.count() == aSubB.count(), "sdrExtrudePrimitive3D: unequally sized polygons (!)"); + const sal_uInt32 nPointCount(std::min(aSubA.count(), aSubB.count())); + + if(nPointCount) + { + basegfx::B3DPoint aPrevA(aSubA.getB3DPoint(nPointCount - 1)); + basegfx::B3DPoint aCurrA(aSubA.getB3DPoint(0)); + const bool bClosed(aSubA.isClosed()); + + for(sal_uInt32 b(0); b < nPointCount; b++) + { + const sal_uInt32 nIndNext((b + 1) % nPointCount); + const basegfx::B3DPoint aNextA(aSubA.getB3DPoint(nIndNext)); + const basegfx::B3DPoint aCurrB(aSubB.getB3DPoint(b)); + + // vector to back + basegfx::B3DVector aDepth(aCurrB - aCurrA); + aDepth.normalize(); + + if(aDepth.equalZero()) + { + // no difference, try to get depth from next point + const basegfx::B3DPoint aNextB(aSubB.getB3DPoint(nIndNext)); + aDepth = aNextB - aNextA; + aDepth.normalize(); + } + + // vector to left (correct for non-closed lines) + const bool bFirstAndNotClosed(!bClosed && 0 == b); + basegfx::B3DVector aLeft(bFirstAndNotClosed ? aCurrA - aNextA : aPrevA - aCurrA); + aLeft.normalize(); + + // create left normal + const basegfx::B3DVector aNormalLeft(aDepth.getPerpendicular(aLeft)); + + // smooth horizontal normals + { + // vector to right (correct for non-closed lines) + const bool bLastAndNotClosed(!bClosed && b + 1 == nPointCount); + basegfx::B3DVector aRight(bLastAndNotClosed ? aCurrA - aPrevA : aNextA - aCurrA); + aRight.normalize(); + + // create right normal + const basegfx::B3DVector aNormalRight(aRight.getPerpendicular(aDepth)); + + // create smoothed in-between normal + basegfx::B3DVector aNewNormal(aNormalLeft + aNormalRight); + aNewNormal.normalize(); + + // set as new normal at polygons + aSubA.setNormal(b, aNewNormal); + aSubB.setNormal(b, aNewNormal); + } + + // prepare next step + aPrevA = aCurrA; + aCurrA = aNextA; + } + + rPolA.setB3DPolygon(a, aSubA); + rPolB.setB3DPolygon(a, aSubB); + } + } + } + + void impMixNormals( + basegfx::B3DPolyPolygon& rPolA, + const basegfx::B3DPolyPolygon& rPolB, + double fWeightA) + { + const double fWeightB(1.0 - fWeightA); + OSL_ENSURE(rPolA.count() == rPolB.count(), "sdrExtrudePrimitive3D: unequally sized polygons (!)"); + const sal_uInt32 nPolygonCount(std::min(rPolA.count(), rPolB.count())); + + for(sal_uInt32 a(0); a < nPolygonCount; a++) + { + basegfx::B3DPolygon aSubA(rPolA.getB3DPolygon(a)); + const basegfx::B3DPolygon& aSubB(rPolB.getB3DPolygon(a)); + OSL_ENSURE(aSubA.count() == aSubB.count(), "sdrExtrudePrimitive3D: unequally sized polygons (!)"); + const sal_uInt32 nPointCount(std::min(aSubA.count(), aSubB.count())); + + for(sal_uInt32 b(0); b < nPointCount; b++) + { + const basegfx::B3DVector aVA(aSubA.getNormal(b) * fWeightA); + const basegfx::B3DVector aVB(aSubB.getNormal(b) * fWeightB); + basegfx::B3DVector aVNew(aVA + aVB); + aVNew.normalize(); + aSubA.setNormal(b, aVNew); + } + + rPolA.setB3DPolygon(a, aSubA); + } + } + + bool impHasCutWith(const basegfx::B2DPolygon& rPoly, const basegfx::B2DPoint& rStart, const basegfx::B2DPoint& rEnd) + { + // polygon is closed, one of the points is a member + const sal_uInt32 nPointCount(rPoly.count()); + + if(!nPointCount) + return false; + + basegfx::B2DPoint aCurrent(rPoly.getB2DPoint(0)); + const basegfx::B2DVector aVector(rEnd - rStart); + + for(sal_uInt32 a(0); a < nPointCount; a++) + { + const sal_uInt32 nNextIndex((a + 1) % nPointCount); + const basegfx::B2DPoint aNext(rPoly.getB2DPoint(nNextIndex)); + const basegfx::B2DVector aEdgeVector(aNext - aCurrent); + + if(basegfx::utils::findCut( + rStart, aVector, + aCurrent, aEdgeVector) != CutFlagValue::NONE) + { + return true; + } + + aCurrent = aNext; + } + + return false; + } +} // end of anonymous namespace + + +namespace drawinglayer::primitive3d +{ + void createLatheSlices( + Slice3DVector& rSliceVector, + const basegfx::B2DPolyPolygon& rSource, + double fBackScale, + double fDiagonal, + double fRotation, + sal_uInt32 nSteps, + bool bCharacterMode, + bool bCloseFront, + bool bCloseBack) + { + if(basegfx::fTools::equalZero(fRotation) || 0 == nSteps) + { + // no rotation or no steps, just one plane + rSliceVector.emplace_back(rSource, basegfx::B3DHomMatrix()); + } + else + { + const bool bBackScale(!basegfx::fTools::equal(fBackScale, 1.0)); + const bool bClosedRotation(!bBackScale && basegfx::fTools::equal(fRotation, 2 * M_PI)); + basegfx::B2DPolyPolygon aFront(rSource); + basegfx::B2DPolyPolygon aBack(rSource); + basegfx::B3DHomMatrix aTransformBack; + basegfx::B2DPolyPolygon aOuterBack; + + if(bClosedRotation) + { + bCloseFront = bCloseBack = false; + } + + if(bBackScale) + { + // avoid null zoom + if(basegfx::fTools::equalZero(fBackScale)) + { + fBackScale = 0.000001; + } + + // back is scaled compared to front, create scaled version + aBack = impScalePolyPolygonOnCenter(aBack, fBackScale); + } + + if(bCloseFront || bCloseBack) + { + const basegfx::B2DRange aBaseRange(basegfx::utils::getRange(aFront)); + const double fOuterLength(aBaseRange.getMaxX() * fRotation); + const double fInnerLength(aBaseRange.getMinX() * fRotation); + const double fAverageLength((fOuterLength + fInnerLength) * 0.5); + + if(bCloseFront) + { + const double fOffsetLen((fAverageLength / 12.0) * fDiagonal); + basegfx::B2DPolyPolygon aOuterFront; + impGetOuterPolyPolygon(aFront, aOuterFront, fOffsetLen, bCharacterMode); + basegfx::B3DHomMatrix aTransform; + aTransform.translate(0.0, 0.0, fOffsetLen); + rSliceVector.emplace_back(aOuterFront, aTransform, SLICETYPE3D_FRONTCAP); + } + + if(bCloseBack) + { + const double fOffsetLen((fAverageLength / 12.0) * fDiagonal); + impGetOuterPolyPolygon(aBack, aOuterBack, fOffsetLen, bCharacterMode); + aTransformBack.translate(0.0, 0.0, -fOffsetLen); + aTransformBack.rotate(0.0, fRotation, 0.0); + } + } + + // add start polygon (a = 0) + if(!bClosedRotation) + { + rSliceVector.emplace_back(aFront, basegfx::B3DHomMatrix()); + } + + // create segments (a + 1 .. nSteps) + const double fStepSize(1.0 / static_cast<double>(nSteps)); + + for(sal_uInt32 a(0); a < nSteps; a++) + { + const double fStep(static_cast<double>(a + 1) * fStepSize); + basegfx::B2DPolyPolygon aNewPoly(bBackScale ? basegfx::utils::interpolate(aFront, aBack, fStep) : aFront); + basegfx::B3DHomMatrix aNewMat; + aNewMat.rotate(0.0, fRotation * fStep, 0.0); + rSliceVector.emplace_back(aNewPoly, aNewMat); + } + + if(bCloseBack) + { + rSliceVector.emplace_back(aOuterBack, aTransformBack, SLICETYPE3D_BACKCAP); + } + } + } + + void createExtrudeSlices( + Slice3DVector& rSliceVector, + const basegfx::B2DPolyPolygon& rSource, + double fBackScale, + double fDiagonal, + double fDepth, + bool bCharacterMode, + bool bCloseFront, + bool bCloseBack) + { + if(basegfx::fTools::equalZero(fDepth)) + { + // no depth, just one plane + rSliceVector.emplace_back(rSource, basegfx::B3DHomMatrix()); + } + else + { + // there is depth, create Polygons for front,back and their default depth positions + basegfx::B2DPolyPolygon aFront(rSource); + basegfx::B2DPolyPolygon aBack(rSource); + const bool bBackScale(!basegfx::fTools::equal(fBackScale, 1.0)); + double fZFront(fDepth); // default depth for aFront + double fZBack(0.0); // default depth for aBack + basegfx::B2DPolyPolygon aOuterBack; + + if(bBackScale) + { + // avoid null zoom + if(basegfx::fTools::equalZero(fBackScale)) + { + fBackScale = 0.000001; + } + + // aFront is scaled compared to aBack, create scaled version + aFront = impScalePolyPolygonOnCenter(aFront, fBackScale); + } + + if(bCloseFront) + { + const double fOffset(fDepth * fDiagonal * 0.5); + fZFront = fDepth - fOffset; + basegfx::B2DPolyPolygon aOuterFront; + impGetOuterPolyPolygon(aFront, aOuterFront, fOffset, bCharacterMode); + basegfx::B3DHomMatrix aTransformFront; + aTransformFront.translate(0.0, 0.0, fDepth); + rSliceVector.emplace_back(aOuterFront, aTransformFront, SLICETYPE3D_FRONTCAP); + } + + if(bCloseBack) + { + const double fOffset(fDepth * fDiagonal * 0.5); + fZBack = fOffset; + impGetOuterPolyPolygon(aBack, aOuterBack, fOffset, bCharacterMode); + } + + // add front and back polygons at evtl. changed depths + { + basegfx::B3DHomMatrix aTransformA, aTransformB; + + aTransformA.translate(0.0, 0.0, fZFront); + rSliceVector.emplace_back(aFront, aTransformA); + + aTransformB.translate(0.0, 0.0, fZBack); + rSliceVector.emplace_back(aBack, aTransformB); + } + + if(bCloseBack) + { + rSliceVector.emplace_back(aOuterBack, basegfx::B3DHomMatrix(), SLICETYPE3D_BACKCAP); + } + } + } + + basegfx::B3DPolyPolygon extractHorizontalLinesFromSlice(const Slice3DVector& rSliceVector, bool bCloseHorLines) + { + basegfx::B3DPolyPolygon aRetval; + const sal_uInt32 nNumSlices(rSliceVector.size()); + + if(nNumSlices) + { + const sal_uInt32 nSlideSubPolygonCount(rSliceVector[0].getB3DPolyPolygon().count()); + + for(sal_uInt32 b(0); b < nSlideSubPolygonCount; b++) + { + const sal_uInt32 nSubPolygonPointCount(rSliceVector[0].getB3DPolyPolygon().getB3DPolygon(b).count()); + + for(sal_uInt32 c(0); c < nSubPolygonPointCount; c++) + { + basegfx::B3DPolygon aNew; + + for(sal_uInt32 d(0); d < nNumSlices; d++) + { + const bool bSamePolygonCount(nSlideSubPolygonCount == rSliceVector[d].getB3DPolyPolygon().count()); + const bool bSamePointCount(nSubPolygonPointCount == rSliceVector[d].getB3DPolyPolygon().getB3DPolygon(b).count()); + + if(bSamePolygonCount && bSamePointCount) + { + aNew.append(rSliceVector[d].getB3DPolyPolygon().getB3DPolygon(b).getB3DPoint(c)); + } + else + { + OSL_ENSURE(bSamePolygonCount, "Slice tools::PolyPolygon with different Polygon count (!)"); + OSL_ENSURE(bSamePointCount, "Slice Polygon with different point count (!)"); + } + } + + aNew.setClosed(bCloseHorLines); + aRetval.append(aNew); + } + } + } + + return aRetval; + } + + basegfx::B3DPolyPolygon extractVerticalLinesFromSlice(const Slice3DVector& rSliceVector) + { + basegfx::B3DPolyPolygon aRetval; + const sal_uInt32 nNumSlices(rSliceVector.size()); + + for(sal_uInt32 a(0); a < nNumSlices; a++) + { + aRetval.append(rSliceVector[a].getB3DPolyPolygon()); + } + + return aRetval; + } + + void extractPlanesFromSlice( + std::vector< basegfx::B3DPolyPolygon >& rFill, + const Slice3DVector& rSliceVector, + bool bCreateNormals, + bool bSmoothNormals, + bool bSmoothLids, + bool bClosed, + double fSmoothNormalsMix, + double fSmoothLidsMix, + bool bCreateTextureCoordinates, + const basegfx::B2DHomMatrix& rTexTransform) + { + const sal_uInt32 nNumSlices(rSliceVector.size()); + + if(!nNumSlices) + return; + + // common parameters + const sal_uInt32 nLoopCount(bClosed ? nNumSlices : nNumSlices - 1); + basegfx::B3DPolyPolygon aEdgeRounding; + sal_uInt32 a; + + // texture parameters + double fInvTexHeight(1.0); + std::vector<double> aTexHeightArray; + basegfx::B3DRange aTexRangeFront; + basegfx::B3DRange aTexRangeBack; + + if(bCreateTextureCoordinates) + { + aTexRangeFront = basegfx::utils::getRange(rSliceVector[0].getB3DPolyPolygon()); + aTexRangeBack = basegfx::utils::getRange(rSliceVector[nNumSlices - 1].getB3DPolyPolygon()); + + if(aTexRangeBack.getDepth() > aTexRangeBack.getWidth()) + { + // last polygon is rotated so that depth is bigger than width, exchange X and Z + // for making applyDefaultTextureCoordinatesParallel use Z instead of X for + // horizontal texture coordinate + aTexRangeBack = basegfx::B3DRange( + aTexRangeBack.getMinZ(), aTexRangeBack.getMinY(), aTexRangeBack.getMinX(), + aTexRangeBack.getMaxZ(), aTexRangeBack.getMaxY(), aTexRangeBack.getMaxX()); + } + + basegfx::B3DPoint aCenter(basegfx::utils::getRange(rSliceVector[0].getB3DPolyPolygon()).getCenter()); + + for(a = 0; a < nLoopCount; a++) + { + const basegfx::B3DPoint aNextCenter(basegfx::utils::getRange(rSliceVector[(a + 1) % nNumSlices].getB3DPolyPolygon()).getCenter()); + const double fLength(basegfx::B3DVector(aNextCenter - aCenter).getLength()); + aTexHeightArray.push_back(fLength); + aCenter = aNextCenter; + } + + const double fTexHeight(std::accumulate(aTexHeightArray.begin(), aTexHeightArray.end(), 0.0)); + + if(!basegfx::fTools::equalZero(fTexHeight)) + { + fInvTexHeight = 1.0 / fTexHeight; + } + } + + if(nLoopCount) + { + double fTexHeightPos(0.0); + for(a = 0; a < nLoopCount; a++) + { + const Slice3D& rSliceA(rSliceVector[a]); + const Slice3D& rSliceB(rSliceVector[(a + 1) % nNumSlices]); + const bool bAcceptPair(SLICETYPE3D_REGULAR == rSliceA.getSliceType() && SLICETYPE3D_REGULAR == rSliceB.getSliceType()); + basegfx::B3DPolyPolygon aPolA(rSliceA.getB3DPolyPolygon()); + basegfx::B3DPolyPolygon aPolB(rSliceB.getB3DPolyPolygon()); + + if(bAcceptPair) + { + if(bCreateNormals) + { + impCreateInBetweenNormals(aPolB, aPolA); + } + + { + const sal_uInt32 nIndPrev((a + nNumSlices - 1) % nNumSlices); + const Slice3D& rSlicePrev(rSliceVector[nIndPrev]); + basegfx::B3DPolyPolygon aPrev(rSlicePrev.getB3DPolyPolygon()); + basegfx::B3DPolyPolygon aPolAA(rSliceA.getB3DPolyPolygon()); + + if(SLICETYPE3D_FRONTCAP == rSlicePrev.getSliceType()) + { + basegfx::B3DPolyPolygon aFront(rSlicePrev.getB3DPolyPolygon()); + const bool bHasSlant(aPolAA != aPrev); + + if(bCreateTextureCoordinates) + { + aFront = basegfx::utils::applyDefaultTextureCoordinatesParallel(aFront, aTexRangeFront); + } + + if(bCreateNormals) + { + basegfx::B3DVector aNormal(0.0, 0.0, -1.0); + + if(aFront.count()) + { + aNormal = -aFront.getB3DPolygon(0).getNormal(); + } + + impSetNormal(aFront, aNormal); + + if(bHasSlant) + { + impCreateInBetweenNormals(aPolAA, aPrev); + + if(bSmoothNormals) + { + // smooth and copy + impMixNormals(aPolA, aPolAA, fSmoothNormalsMix); + aPolAA = aPolA; + } + else + { + // take over from surface + aPolAA = aPolA; + } + + if(bSmoothLids) + { + // smooth and copy + impMixNormals(aFront, aPrev, fSmoothLidsMix); + aPrev = aFront; + } + else + { + // take over from front + aPrev = aFront; + } + } + else + { + if(bSmoothNormals) + { + // smooth + impMixNormals(aPolA, aFront, fSmoothNormalsMix); + } + + if(bSmoothLids) + { + // smooth and copy + impMixNormals(aFront, aPolA, fSmoothLidsMix); + aPolA = aFront; + } + } + } + + if(bHasSlant) + { + double fTexStart{}; + double fTexStop{}; + if(bCreateTextureCoordinates) + { + fTexStart = fTexHeightPos * fInvTexHeight; + fTexStop = (fTexHeightPos - aTexHeightArray[(a + nLoopCount - 1) % nLoopCount]) * fInvTexHeight; + } + + impAddInBetweenFill(aEdgeRounding, aPolAA, aPrev, fTexStart, fTexStop, bCreateNormals, bCreateTextureCoordinates); + } + + aFront.flip(); + rFill.push_back(aFront); + } + else + { + if(bCreateNormals && bSmoothNormals && (nIndPrev != a + 1)) + { + impCreateInBetweenNormals(aPolAA, aPrev); + impMixNormals(aPolA, aPolAA, 0.5); + } + } + } + + { + const sal_uInt32 nIndNext((a + 2) % nNumSlices); + const Slice3D& rSliceNext(rSliceVector[nIndNext]); + basegfx::B3DPolyPolygon aNext(rSliceNext.getB3DPolyPolygon()); + basegfx::B3DPolyPolygon aPolBB(rSliceB.getB3DPolyPolygon()); + + if(SLICETYPE3D_BACKCAP == rSliceNext.getSliceType()) + { + basegfx::B3DPolyPolygon aBack(rSliceNext.getB3DPolyPolygon()); + const bool bHasSlant(aPolBB != aNext); + + if(bCreateTextureCoordinates) + { + aBack = basegfx::utils::applyDefaultTextureCoordinatesParallel(aBack, aTexRangeBack); + } + + if(bCreateNormals) + { + const basegfx::B3DVector aNormal(aBack.count() ? aBack.getB3DPolygon(0).getNormal() : basegfx::B3DVector(0.0, 0.0, 1.0)); + impSetNormal(aBack, aNormal); + + if(bHasSlant) + { + impCreateInBetweenNormals(aNext, aPolBB); + + if(bSmoothNormals) + { + // smooth and copy + impMixNormals(aPolB, aPolBB, fSmoothNormalsMix); + aPolBB = aPolB; + } + else + { + // take over from surface + aPolBB = aPolB; + } + + if(bSmoothLids) + { + // smooth and copy + impMixNormals(aBack, aNext, fSmoothLidsMix); + aNext = aBack; + } + else + { + // take over from back + aNext = aBack; + } + } + else + { + if(bSmoothNormals) + { + // smooth + impMixNormals(aPolB, aBack, fSmoothNormalsMix); + } + + if(bSmoothLids) + { + // smooth and copy + impMixNormals(aBack, aPolB, fSmoothLidsMix); + aPolB = aBack; + } + } + } + + if(bHasSlant) + { + double fTexStart{}; + double fTexStop{}; + if(bCreateTextureCoordinates) + { + fTexStart = (fTexHeightPos + aTexHeightArray[a] + aTexHeightArray[(a + 1) % nLoopCount]) * fInvTexHeight; + fTexStop = (fTexHeightPos + aTexHeightArray[a]) * fInvTexHeight; + } + + impAddInBetweenFill(aEdgeRounding, aNext, aPolBB, fTexStart, fTexStop, bCreateNormals, bCreateTextureCoordinates); + } + + rFill.push_back(aBack); + } + else + { + if(bCreateNormals && bSmoothNormals && (nIndNext != a)) + { + impCreateInBetweenNormals(aNext, aPolBB); + impMixNormals(aPolB, aPolBB, 0.5); + } + } + } + + double fTexStart{}; + double fTexStop{}; + if(bCreateTextureCoordinates) + { + fTexStart = (fTexHeightPos + aTexHeightArray[a]) * fInvTexHeight; + fTexStop = fTexHeightPos * fInvTexHeight; + } + + impAddInBetweenFill(aEdgeRounding, aPolB, aPolA, fTexStart, fTexStop, bCreateNormals, bCreateTextureCoordinates); + } + + if(bCreateTextureCoordinates) + { + fTexHeightPos += aTexHeightArray[a]; + } + } + } + else + { + // no loop, but a single slice (1 == nNumSlices), create a filling from the single + // front plane + const Slice3D& rSlice(rSliceVector[0]); + basegfx::B3DPolyPolygon aFront(rSlice.getB3DPolyPolygon()); + + if(bCreateTextureCoordinates) + { + aFront = basegfx::utils::applyDefaultTextureCoordinatesParallel(aFront, aTexRangeFront); + } + + if(bCreateNormals) + { + basegfx::B3DVector aNormal(0.0, 0.0, -1.0); + + if(aFront.count()) + { + aNormal = -aFront.getB3DPolygon(0).getNormal(); + } + + impSetNormal(aFront, aNormal); + } + + aFront.flip(); + rFill.push_back(aFront); + } + + if(bCreateTextureCoordinates) + { + aEdgeRounding.transformTextureCoordinates(rTexTransform); + } + + for(a = 0; a < aEdgeRounding.count(); a++) + { + rFill.emplace_back(aEdgeRounding.getB3DPolygon(a)); + } + } + + void createReducedOutlines( + const geometry::ViewInformation3D& rViewInformation, + const basegfx::B3DHomMatrix& rObjectTransform, + const basegfx::B3DPolygon& rLoopA, + const basegfx::B3DPolygon& rLoopB, + basegfx::B3DPolyPolygon& rTarget) + { + const sal_uInt32 nPointCount(rLoopA.count()); + + // with identical polygons there are no outlines + if(rLoopA == rLoopB) + return; + + if(!(nPointCount && nPointCount == rLoopB.count())) + return; + + const basegfx::B3DHomMatrix aObjectTransform(rViewInformation.getObjectToView() * rObjectTransform); + const basegfx::B2DPolygon a2DLoopA(basegfx::utils::createB2DPolygonFromB3DPolygon(rLoopA, aObjectTransform)); + const basegfx::B2DPolygon a2DLoopB(basegfx::utils::createB2DPolygonFromB3DPolygon(rLoopB, aObjectTransform)); + const basegfx::B2DPoint a2DCenterA(a2DLoopA.getB2DRange().getCenter()); + const basegfx::B2DPoint a2DCenterB(a2DLoopB.getB2DRange().getCenter()); + + // without detectable Y-Axis there are no outlines + if(a2DCenterA.equal(a2DCenterB)) + return; + + // search for outmost left and right inter-loop-edges which do not cut the loops + const basegfx::B2DPoint aCommonCenter(basegfx::average(a2DCenterA, a2DCenterB)); + const basegfx::B2DVector aAxisVector(a2DCenterA - a2DCenterB); + double fMaxLeft(0.0); + double fMaxRight(0.0); + sal_uInt32 nIndexLeft(0); + sal_uInt32 nIndexRight(0); + + for(sal_uInt32 a(0); a < nPointCount; a++) + { + const basegfx::B2DPoint aStart(a2DLoopA.getB2DPoint(a)); + const basegfx::B2DPoint aEnd(a2DLoopB.getB2DPoint(a)); + const basegfx::B2DPoint aMiddle(basegfx::average(aStart, aEnd)); + + if(!basegfx::utils::isInside(a2DLoopA, aMiddle)) + { + if(!basegfx::utils::isInside(a2DLoopB, aMiddle)) + { + if(!impHasCutWith(a2DLoopA, aStart, aEnd)) + { + if(!impHasCutWith(a2DLoopB, aStart, aEnd)) + { + const basegfx::B2DVector aCandidateVector(aMiddle - aCommonCenter); + const double fCross(aCandidateVector.cross(aAxisVector)); + const double fDistance(aCandidateVector.getLength()); + + if(fCross > 0.0) + { + if(fDistance > fMaxLeft) + { + fMaxLeft = fDistance; + nIndexLeft = a; + } + } + else if(fCross < 0.0) + { + if(fDistance > fMaxRight) + { + fMaxRight = fDistance; + nIndexRight = a; + } + } + } + } + } + } + } + + if(fMaxLeft != 0.0) + { + basegfx::B3DPolygon aToBeAdded; + aToBeAdded.append(rLoopA.getB3DPoint(nIndexLeft)); + aToBeAdded.append(rLoopB.getB3DPoint(nIndexLeft)); + rTarget.append(aToBeAdded); + } + + if(fMaxRight != 0.0) + { + basegfx::B3DPolygon aToBeAdded; + aToBeAdded.append(rLoopA.getB3DPoint(nIndexRight)); + aToBeAdded.append(rLoopB.getB3DPoint(nIndexRight)); + rTarget.append(aToBeAdded); + } + } + +} // end of namespace + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |