diff options
Diffstat (limited to 'sc/source/ui/sidebar/CellBorderStyleControl.cxx')
| -rw-r--r-- | sc/source/ui/sidebar/CellBorderStyleControl.cxx | 281 |
1 files changed, 281 insertions, 0 deletions
diff --git a/sc/source/ui/sidebar/CellBorderStyleControl.cxx b/sc/source/ui/sidebar/CellBorderStyleControl.cxx new file mode 100644 index 000000000..6749588b9 --- /dev/null +++ b/sc/source/ui/sidebar/CellBorderStyleControl.cxx @@ -0,0 +1,281 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include "CellBorderStyleControl.hxx" +#include <editeng/boxitem.hxx> +#include <editeng/borderline.hxx> +#include <sfx2/bindings.hxx> +#include <sfx2/dispatch.hxx> +#include <svx/svxids.hrc> +#include <vcl/settings.hxx> +#include <editeng/lineitem.hxx> +#include <memory> + +namespace sc::sidebar { + +#define FRM_VALID_LEFT 0x01 +#define FRM_VALID_RIGHT 0x02 +#define FRM_VALID_TOP 0x04 +#define FRM_VALID_BOTTOM 0x08 +#define FRM_VALID_HINNER 0x10 +#define FRM_VALID_VINNER 0x20 +#define FRM_VALID_OUTER 0x0f +#define FRM_VALID_ALL 0xff + +CellBorderStylePopup::CellBorderStylePopup(weld::Toolbar* pParent, const OString& rId, SfxDispatcher* pDispatcher) + : WeldToolbarPopup(nullptr, pParent, "modules/scalc/ui/floatingborderstyle.ui", "FloatingBorderStyle") + , maToolButton(pParent, rId) + , mpDispatcher(pDispatcher) + , mxTBBorder1(m_xBuilder->weld_toolbar("border1")) + , mxTBBorder2(m_xBuilder->weld_toolbar("border2")) + , mxTBBorder3(m_xBuilder->weld_toolbar("border3")) + , mxTBBorder4(m_xBuilder->weld_toolbar("border4")) +{ + Initialize(); +} + +void CellBorderStylePopup::GrabFocus() +{ + mxTBBorder1->grab_focus(); +} + +CellBorderStylePopup::~CellBorderStylePopup() +{ +} + +void CellBorderStylePopup::Initialize() +{ + mxTBBorder1->connect_clicked ( LINK(this, CellBorderStylePopup, TB1SelectHdl) ); + + mxTBBorder2->connect_clicked ( LINK(this, CellBorderStylePopup, TB2and3SelectHdl) ); + mxTBBorder3->connect_clicked ( LINK(this, CellBorderStylePopup, TB2and3SelectHdl) ); + + mxTBBorder4->connect_clicked ( LINK(this, CellBorderStylePopup, TB4SelectHdl) ); +} + +IMPL_LINK(CellBorderStylePopup, TB1SelectHdl, const OString&, rId, void) +{ + SvxBoxItem aBorderOuter( SID_ATTR_BORDER_OUTER ); + SvxBoxInfoItem aBorderInner( SID_ATTR_BORDER_INNER ); + editeng::SvxBorderLine theDefLine(nullptr, SvxBorderLineWidth::Thin); + editeng::SvxBorderLine *pLeft = nullptr, *pRight = nullptr, *pTop = nullptr, *pBottom = nullptr; + sal_uInt8 nValidFlags = 0; + + if (rId == "none") + { + nValidFlags |= FRM_VALID_ALL; + SvxLineItem aLineItem1( SID_ATTR_BORDER_DIAG_BLTR ); + SvxLineItem aLineItem2( SID_ATTR_BORDER_DIAG_TLBR ); + aLineItem1.SetLine( nullptr ); //modify + aLineItem2.SetLine( nullptr ); //modify + mpDispatcher->ExecuteList( + SID_ATTR_BORDER_DIAG_BLTR, SfxCallMode::RECORD, { &aLineItem1 }); + mpDispatcher->ExecuteList( + SID_ATTR_BORDER_DIAG_TLBR, SfxCallMode::RECORD, { &aLineItem2 }); + } + else if (rId == "all") + { + pLeft = pRight = pTop = pBottom = &theDefLine; + aBorderInner.SetLine( &theDefLine, SvxBoxInfoItemLine::HORI ); + aBorderInner.SetLine( &theDefLine, SvxBoxInfoItemLine::VERT ); + nValidFlags |= FRM_VALID_ALL; + } + else if (rId == "outside") + { + pLeft = pRight = pTop = pBottom = &theDefLine; + nValidFlags |= FRM_VALID_OUTER; + } + else if (rId == "thickbox") + { + theDefLine.SetWidth(SvxBorderLineWidth::Thick); + pLeft = pRight = pTop = pBottom = &theDefLine; + nValidFlags |= FRM_VALID_OUTER; + } + + aBorderOuter.SetLine( pLeft, SvxBoxItemLine::LEFT ); + aBorderOuter.SetLine( pRight, SvxBoxItemLine::RIGHT ); + aBorderOuter.SetLine( pTop, SvxBoxItemLine::TOP ); + aBorderOuter.SetLine( pBottom, SvxBoxItemLine::BOTTOM ); + + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::TOP, 0 != (nValidFlags&FRM_VALID_TOP )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::BOTTOM, 0 != (nValidFlags&FRM_VALID_BOTTOM )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::LEFT, 0 != (nValidFlags&FRM_VALID_LEFT)); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::RIGHT, 0 != (nValidFlags&FRM_VALID_RIGHT )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::HORI, 0 != (nValidFlags&FRM_VALID_HINNER )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::VERT, 0 != (nValidFlags&FRM_VALID_VINNER)); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISTANCE ); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISABLE, false ); + + mpDispatcher->ExecuteList( + SID_ATTR_BORDER, SfxCallMode::RECORD, { &aBorderOuter, &aBorderInner }); + + maToolButton.set_inactive(); +} + +IMPL_LINK(CellBorderStylePopup, TB2and3SelectHdl, const OString&, rId, void) +{ + if (rId == "diagup") + { + editeng::SvxBorderLine aTmp( nullptr, SvxBorderLineWidth::Thin ); + SvxLineItem aLineItem( SID_ATTR_BORDER_DIAG_BLTR ); + aLineItem.SetLine( &aTmp ); + mpDispatcher->ExecuteList( + SID_ATTR_BORDER_DIAG_BLTR, SfxCallMode::RECORD, { &aLineItem }); + } + else if (rId == "diagdown") + { + editeng::SvxBorderLine aTmp( nullptr, SvxBorderLineWidth::Thin ); + SvxLineItem aLineItem( SID_ATTR_BORDER_DIAG_TLBR ); + aLineItem.SetLine( &aTmp ); + mpDispatcher->ExecuteList( + SID_ATTR_BORDER_DIAG_TLBR, SfxCallMode::RECORD, { &aLineItem }); + } + else + { + SvxBoxItem aBorderOuter( SID_ATTR_BORDER_OUTER ); + SvxBoxInfoItem aBorderInner( SID_ATTR_BORDER_INNER ); + editeng::SvxBorderLine theDefLine(nullptr, SvxBorderLineWidth::Thin); + editeng::SvxBorderLine *pLeft = nullptr, + *pRight = nullptr, + *pTop = nullptr, + *pBottom = nullptr; + sal_uInt8 nValidFlags = 0; + if (rId == "left") + { + pLeft = &theDefLine; + nValidFlags |= FRM_VALID_LEFT; + } + else if (rId == "right") + { + if(!AllSettings::GetLayoutRTL()) + { + pRight = &theDefLine; + nValidFlags |= FRM_VALID_RIGHT; + } + else + { + pLeft = &theDefLine; + nValidFlags |= FRM_VALID_LEFT; + } + } + else if (rId == "top") + { + pTop = &theDefLine; + nValidFlags |= FRM_VALID_TOP; + } + else if (rId == "bottom") + { + pBottom = &theDefLine; + nValidFlags |= FRM_VALID_BOTTOM; + } + else if (rId == "topbottom") + { + pTop = pBottom = &theDefLine; + nValidFlags |= FRM_VALID_BOTTOM|FRM_VALID_TOP; + } + else if (rId == "leftright") + { + pLeft = pRight = &theDefLine; + nValidFlags |= FRM_VALID_RIGHT|FRM_VALID_LEFT; + } + aBorderOuter.SetLine( pLeft, SvxBoxItemLine::LEFT ); + aBorderOuter.SetLine( pRight, SvxBoxItemLine::RIGHT ); + aBorderOuter.SetLine( pTop, SvxBoxItemLine::TOP ); + aBorderOuter.SetLine( pBottom, SvxBoxItemLine::BOTTOM ); + + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::TOP, 0 != (nValidFlags&FRM_VALID_TOP )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::BOTTOM, 0 != (nValidFlags&FRM_VALID_BOTTOM )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::LEFT, 0 != (nValidFlags&FRM_VALID_LEFT)); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::RIGHT, 0 != (nValidFlags&FRM_VALID_RIGHT )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::HORI, 0 != (nValidFlags&FRM_VALID_HINNER )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::VERT, 0 != (nValidFlags&FRM_VALID_VINNER)); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISTANCE ); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISABLE, false ); + + mpDispatcher->ExecuteList( + SID_ATTR_BORDER, SfxCallMode::RECORD, { &aBorderOuter, &aBorderInner}); + } + + maToolButton.set_inactive(); +} + +IMPL_LINK(CellBorderStylePopup, TB4SelectHdl, const OString&, rId, void) +{ + SvxBoxItem aBorderOuter( SID_ATTR_BORDER_OUTER ); + SvxBoxInfoItem aBorderInner( SID_ATTR_BORDER_INNER ); + std::unique_ptr<editeng::SvxBorderLine> pTop; + std::unique_ptr<editeng::SvxBorderLine> pBottom; + sal_uInt8 nValidFlags = 0; + using namespace ::com::sun::star::table::BorderLineStyle; + + //FIXME: properly adapt to new line border model + + if (rId == "thickbottom") + { + pBottom.reset(new editeng::SvxBorderLine(nullptr, SvxBorderLineWidth::Thick)); + nValidFlags |= FRM_VALID_BOTTOM; + } + else if (rId == "doublebottom") + { + pBottom.reset(new editeng::SvxBorderLine(nullptr)); + pBottom->GuessLinesWidths(SvxBorderLineStyle::DOUBLE, SvxBorderLineWidth::Hairline, + SvxBorderLineWidth::Hairline, SvxBorderLineWidth::Thin); + nValidFlags |= FRM_VALID_BOTTOM; + } + else if (rId == "topthickbottom") + { + pBottom.reset(new editeng::SvxBorderLine(nullptr, SvxBorderLineWidth::Thick)); + pTop.reset(new editeng::SvxBorderLine(nullptr, SvxBorderLineWidth::Thin)); + nValidFlags |= FRM_VALID_BOTTOM|FRM_VALID_TOP; + } + else if (rId == "topdoublebottom") + { + pBottom.reset(new editeng::SvxBorderLine(nullptr)); + pBottom->GuessLinesWidths(SvxBorderLineStyle::DOUBLE, SvxBorderLineWidth::Hairline, + SvxBorderLineWidth::Hairline, SvxBorderLineWidth::Thin); + pTop.reset(new editeng::SvxBorderLine(nullptr, SvxBorderLineWidth::Thin)); + nValidFlags |= FRM_VALID_BOTTOM|FRM_VALID_TOP; + } + + aBorderOuter.SetLine( pTop.get(), SvxBoxItemLine::TOP ); + aBorderOuter.SetLine( pBottom.get(), SvxBoxItemLine::BOTTOM ); + aBorderOuter.SetLine( nullptr, SvxBoxItemLine::LEFT ); + aBorderOuter.SetLine( nullptr, SvxBoxItemLine::RIGHT ); + + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::TOP, 0 != (nValidFlags&FRM_VALID_TOP )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::BOTTOM, 0 != (nValidFlags&FRM_VALID_BOTTOM )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::LEFT, 0 != (nValidFlags&FRM_VALID_LEFT )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::RIGHT, 0 != (nValidFlags&FRM_VALID_RIGHT )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::HORI, 0 != (nValidFlags&FRM_VALID_HINNER )); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::VERT, 0 != (nValidFlags&FRM_VALID_VINNER)); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISTANCE ); + aBorderInner.SetValid( SvxBoxInfoItemValidFlags::DISABLE, false ); + + mpDispatcher->ExecuteList( + SID_ATTR_BORDER, SfxCallMode::RECORD, { &aBorderOuter, &aBorderInner }); + + pTop.reset(); + pBottom.reset(); + + maToolButton.set_inactive(); +} + +} // end of namespace sc::sidebar + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |