diff options
Diffstat (limited to 'sc/source/ui/view/viewfun2.cxx')
| -rw-r--r-- | sc/source/ui/view/viewfun2.cxx | 3464 |
1 files changed, 3464 insertions, 0 deletions
diff --git a/sc/source/ui/view/viewfun2.cxx b/sc/source/ui/view/viewfun2.cxx new file mode 100644 index 000000000..dbee405f1 --- /dev/null +++ b/sc/source/ui/view/viewfun2.cxx @@ -0,0 +1,3464 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source eCode Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <scitems.hxx> + +#include <sfx2/app.hxx> +#include <editeng/borderline.hxx> +#include <editeng/boxitem.hxx> +#include <editeng/fontitem.hxx> +#include <editeng/lineitem.hxx> +#include <editeng/scripttypeitem.hxx> +#include <svl/srchitem.hxx> +#include <sfx2/linkmgr.hxx> +#include <sfx2/dispatch.hxx> +#include <sfx2/docfilt.hxx> +#include <sfx2/docfile.hxx> +#include <sfx2/objitem.hxx> +#include <sfx2/viewfrm.hxx> +#include <svl/numformat.hxx> +#include <svl/stritem.hxx> +#include <svl/zforlist.hxx> +#include <svx/srchdlg.hxx> +#include <svx/svdview.hxx> +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> +#include <osl/diagnose.h> + +#include <viewfunc.hxx> +#include <vcl/uitest/logger.hxx> +#include <vcl/uitest/eventdescription.hxx> + +#include <sc.hrc> +#include <globstr.hrc> +#include <scresid.hxx> + +#include <attrib.hxx> +#include <autoform.hxx> +#include <formulacell.hxx> +#include <cellmergeoption.hxx> +#include <compiler.hxx> +#include <docfunc.hxx> +#include <docpool.hxx> +#include <docsh.hxx> +#include <docoptio.hxx> +#include <global.hxx> +#include <patattr.hxx> +#include <printfun.hxx> +#include <refundo.hxx> +#include <table.hxx> +#include <tablink.hxx> +#include <tabvwsh.hxx> +#include <uiitems.hxx> +#include <undoblk.hxx> +#include <undotab.hxx> +#include <sizedev.hxx> +#include <editable.hxx> +#include <docuno.hxx> +#include <charthelper.hxx> +#include <tabbgcolor.hxx> +#include <clipparam.hxx> +#include <prnsave.hxx> +#include <searchresults.hxx> +#include <tokenarray.hxx> +#include <rowheightcontext.hxx> +#include <LibreOfficeKit/LibreOfficeKitEnums.h> +#include <comphelper/lok.hxx> +#include <mergecellsdialog.hxx> +#include <sheetevents.hxx> +#include <columnspanset.hxx> + +#include <vector> +#include <memory> +#include <boost/property_tree/json_parser.hpp> +#include <tools/json_writer.hxx> + +#include <officecfg/Office/Calc.hxx> + +using namespace com::sun::star; +using ::editeng::SvxBorderLine; + +namespace { + +void collectUIInformation(std::map<OUString, OUString>&& aParameters, const OUString& rAction) +{ + EventDescription aDescription; + aDescription.aID = "grid_window"; + aDescription.aAction = rAction; + aDescription.aParameters = std::move(aParameters); + aDescription.aParent = "MainWindow"; + aDescription.aKeyWord = "ScGridWinUIObject"; + + UITestLogger::getInstance().logEvent(aDescription); +} +} + +using ::std::vector; +using ::std::unique_ptr; + +bool ScViewFunc::AdjustBlockHeight( bool bPaint, ScMarkData* pMarkData ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + if (!pMarkData) + pMarkData = &GetViewData().GetMarkData(); + + ScDocument& rDoc = pDocSh->GetDocument(); + std::vector<sc::ColRowSpan> aMarkedRows = pMarkData->GetMarkedRowSpans(); + + if (aMarkedRows.empty()) + { + SCROW nCurRow = GetViewData().GetCurY(); + aMarkedRows.emplace_back(nCurRow, nCurRow); + } + + if (comphelper::LibreOfficeKit::isActive()) + { + SCCOLROW nStart = aMarkedRows[0].mnStart; + OnLOKSetWidthOrHeight(nStart, /*width: */ false); + } + + double nPPTX = GetViewData().GetPPTX(); + double nPPTY = GetViewData().GetPPTY(); + Fraction aZoomX = GetViewData().GetZoomX(); + Fraction aZoomY = GetViewData().GetZoomY(); + + ScSizeDeviceProvider aProv(pDocSh); + if (aProv.IsPrinter()) + { + nPPTX = aProv.GetPPTX(); + nPPTY = aProv.GetPPTY(); + aZoomX = aZoomY = Fraction( 1, 1 ); + } + + sc::RowHeightContext aCxt(rDoc.MaxRow(), nPPTX, nPPTY, aZoomX, aZoomY, aProv.GetDevice()); + bool bAnyChanged = false; + for (const SCTAB& nTab : *pMarkData) + { + bool bChanged = false; + SCROW nPaintY = 0; + for (const auto& rRow : aMarkedRows) + { + SCROW nStartNo = rRow.mnStart; + SCROW nEndNo = rRow.mnEnd; + ScAddress aTopLeft(0, nStartNo, nTab); + rDoc.UpdateScriptTypes(aTopLeft, rDoc.GetSheetLimits().GetMaxColCount(), nEndNo-nStartNo+1); + if (rDoc.SetOptimalHeight(aCxt, nStartNo, nEndNo, nTab, true)) + { + if (!bChanged) + nPaintY = nStartNo; + bAnyChanged = bChanged = true; + } + } + // tdf#76183: recalculate objects' positions + if (bChanged) + rDoc.SetDrawPageSize(nTab); + if ( bPaint && bChanged ) + pDocSh->PostPaint( 0, nPaintY, nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab, + PaintPartFlags::Grid | PaintPartFlags::Left ); + } + + if ( bPaint && bAnyChanged ) + pDocSh->UpdateOle(GetViewData()); + + if (comphelper::LibreOfficeKit::isActive()) + { + SCTAB nTab = GetViewData().GetTabNo(); + ScTabViewShell::notifyAllViewsSheetGeomInvalidation( + GetViewData().GetViewShell(), + false /* bColumns */, true /* bRows */, + true /* bSizes*/, false /* bHidden */, false /* bFiltered */, + false /* bGroups */, nTab); + ScTabViewShell::notifyAllViewsHeaderInvalidation(GetViewData().GetViewShell(), ROW_HEADER, nTab); + } + + return bAnyChanged; +} + +bool ScViewFunc::AdjustRowHeight( SCROW nStartRow, SCROW nEndRow, bool bApi ) +{ + if (comphelper::LibreOfficeKit::isActive()) + { + OnLOKSetWidthOrHeight(nStartRow, /*width: */ false); + } + + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + SCTAB nTab = GetViewData().GetTabNo(); + double nPPTX = GetViewData().GetPPTX(); + double nPPTY = GetViewData().GetPPTY(); + Fraction aZoomX = GetViewData().GetZoomX(); + Fraction aZoomY = GetViewData().GetZoomY(); + sal_uInt16 nOldPixel = 0; + if (nStartRow == nEndRow) + nOldPixel = static_cast<sal_uInt16>(rDoc.GetRowHeight(nStartRow,nTab) * nPPTY); + + ScSizeDeviceProvider aProv(pDocSh); + if (aProv.IsPrinter()) + { + nPPTX = aProv.GetPPTX(); + nPPTY = aProv.GetPPTY(); + aZoomX = aZoomY = Fraction( 1, 1 ); + } + sc::RowHeightContext aCxt(rDoc.MaxRow(), nPPTX, nPPTY, aZoomX, aZoomY, aProv.GetDevice()); + bool bChanged = rDoc.SetOptimalHeight(aCxt, nStartRow, nEndRow, nTab, bApi); + + // tdf#76183: recalculate objects' positions + if (bChanged) + rDoc.SetDrawPageSize(nTab); + + if (bChanged && ( nStartRow == nEndRow )) + { + sal_uInt16 nNewPixel = static_cast<sal_uInt16>(rDoc.GetRowHeight(nStartRow,nTab) * nPPTY); + if ( nNewPixel == nOldPixel ) + bChanged = false; + } + + if ( bChanged ) + pDocSh->PostPaint( 0, nStartRow, nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab, + PaintPartFlags::Grid | PaintPartFlags::Left ); + + if (comphelper::LibreOfficeKit::isActive()) + { + ScTabViewShell::notifyAllViewsSheetGeomInvalidation( + GetViewData().GetViewShell(), + false /* bColumns */, true /* bRows */, + true /* bSizes*/, false /* bHidden */, false /* bFiltered */, + false /* bGroups */, nTab); + ScTabViewShell::notifyAllViewsHeaderInvalidation(GetViewData().GetViewShell(), ROW_HEADER, GetViewData().GetTabNo()); + } + + return bChanged; +} + +namespace { + +enum ScAutoSum +{ + ScAutoSumNone = 0, + ScAutoSumData, + ScAutoSumSum, + ScAutoSumAverage, + ScAutoSumMax, + ScAutoSumMin, + ScAutoSumCount, + ScAutoSumCountA, + ScAutoSumProduct, + ScAutoSumStDev, + ScAutoSumStDevP, + ScAutoSumVar, + ScAutoSumVarP, + ScAutoSumEnd +}; + +} + +static ScAutoSum lcl_IsAutoSumData( ScDocument& rDoc, SCCOL nCol, SCROW nRow, + SCTAB nTab, ScDirection eDir, SCCOLROW& nExtend ) +{ + ScRefCellValue aCell(rDoc, ScAddress(nCol, nRow, nTab)); + if (aCell.hasNumeric()) + { + if (aCell.meType == CELLTYPE_FORMULA) + { + ScAutoSum val = ScAutoSumNone; + ScTokenArray* pCode = aCell.mpFormula->GetCode(); + if ( pCode ) + { + switch( pCode->GetOuterFuncOpCode() ) + { + case ocSum : val = ScAutoSumSum; + break; + case ocAverage : val = ScAutoSumAverage; + break; + case ocMax : val = ScAutoSumMax; + break; + case ocMin : val = ScAutoSumMin; + break; + case ocCount : val = ScAutoSumCount; + break; + case ocCount2 : val = ScAutoSumCountA; + break; + case ocProduct : val = ScAutoSumProduct; + break; + case ocStDev : val = ScAutoSumStDev; + break; + case ocStDevP : val = ScAutoSumStDevP; + break; + case ocVar : val = ScAutoSumVar; + break; + case ocVarP : val = ScAutoSumVarP; + break; + default : + break; + } + if ( pCode->GetAdjacentExtendOfOuterFuncRefs( nExtend, + ScAddress( nCol, nRow, nTab ), eDir ) ) + return val; + } + } + return ScAutoSumData; + } + return ScAutoSumNone; +} + +#define SC_AUTOSUM_MAXCOUNT 20 + +static ScAutoSum lcl_SeekAutoSumData( ScDocument& rDoc, SCCOL& nCol, SCROW& nRow, + SCTAB nTab, ScDirection eDir, SCCOLROW& nExtend ) +{ + sal_uInt16 nCount = 0; + while (nCount < SC_AUTOSUM_MAXCOUNT) + { + if ( eDir == DIR_TOP ) + { + if (nRow > 0) + --nRow; + else + return ScAutoSumNone; + } + else + { + if (nCol > 0) + --nCol; + else + return ScAutoSumNone; + } + ScAutoSum eSum; + if ( (eSum = lcl_IsAutoSumData( + rDoc, nCol, nRow, nTab, eDir, nExtend )) != ScAutoSumNone ) + return eSum; + ++nCount; + } + return ScAutoSumNone; +} + +#undef SC_AUTOSUM_MAXCOUNT + +static bool lcl_FindNextSumEntryInColumn( ScDocument& rDoc, SCCOL nCol, SCROW& nRow, + SCTAB nTab, SCCOLROW& nExtend, SCROW nMinRow ) +{ + const SCROW nTmp = nRow; + ScAutoSum eSkip = ScAutoSumNone; + for (;;) + { + eSkip = lcl_IsAutoSumData( rDoc, nCol, nRow, nTab, DIR_TOP, nExtend ); + if (eSkip != ScAutoSumData || nRow <= nMinRow ) + break; + --nRow; + } + return eSkip >= ScAutoSumSum && nRow < nTmp; +} + +static bool lcl_FindNextSumEntryInRow( ScDocument& rDoc, SCCOL& nCol, SCROW nRow, + SCTAB nTab, SCCOLROW& nExtend, SCCOL nMinCol ) +{ + const SCCOL nTmp = nCol; + ScAutoSum eSkip = ScAutoSumNone; + for (;;) + { + eSkip = lcl_IsAutoSumData( rDoc, nCol, nRow, nTab, DIR_LEFT, nExtend ); + if (eSkip != ScAutoSumData || nCol <= nMinCol ) + break; + --nCol; + } + return eSkip >= ScAutoSumSum && nCol < nTmp; +} + +static ScAutoSum lcl_GetAutoSumForColumnRange( ScDocument& rDoc, ScRangeList& rRangeList, const ScRange& rRange ) +{ + const ScAddress aStart = rRange.aStart; + const ScAddress aEnd = rRange.aEnd; + if ( aStart.Col() != aEnd.Col() ) + { + return ScAutoSumNone; + } + + const SCTAB nTab = aEnd.Tab(); + const SCCOL nCol = aEnd.Col(); + SCROW nEndRow = aEnd.Row(); + SCROW nStartRow = nEndRow; + SCCOLROW nExtend = 0; + ScAutoSum eSum = lcl_IsAutoSumData( rDoc, nCol, nEndRow, nTab, DIR_TOP, nExtend /*out*/ ); + + if ( eSum >= ScAutoSumSum ) + { + bool bContinue = false; + do + { + rRangeList.push_back( ScRange( nCol, nStartRow, nTab, nCol, nEndRow, nTab ) ); + nEndRow = static_cast< SCROW >( nExtend ); + bContinue = lcl_FindNextSumEntryInColumn( rDoc, nCol, nEndRow /*inout*/, nTab, nExtend /*out*/, aStart.Row() ); + if ( bContinue ) + { + nStartRow = nEndRow; + } + } while ( bContinue ); + } + else + { + while ( nStartRow > aStart.Row() ) + { + eSum = lcl_IsAutoSumData( rDoc, nCol, nStartRow-1, nTab, DIR_TOP, nExtend /*out*/ ); + if (eSum >= ScAutoSumSum ) + break; + --nStartRow; + } + rRangeList.push_back( ScRange( nCol, nStartRow, nTab, nCol, nEndRow, nTab ) ); + if (eSum == ScAutoSumNone) + eSum = ScAutoSumData; + } + + return eSum; +} + +static ScAutoSum lcl_GetAutoSumForRowRange( ScDocument& rDoc, ScRangeList& rRangeList, const ScRange& rRange ) +{ + const ScAddress aStart = rRange.aStart; + const ScAddress aEnd = rRange.aEnd; + if ( aStart.Row() != aEnd.Row() ) + { + return ScAutoSumNone; + } + + const SCTAB nTab = aEnd.Tab(); + const SCROW nRow = aEnd.Row(); + SCCOL nEndCol = aEnd.Col(); + SCCOL nStartCol = nEndCol; + SCCOLROW nExtend = 0; + ScAutoSum eSum = lcl_IsAutoSumData( rDoc, nEndCol, nRow, nTab, DIR_LEFT, nExtend /*out*/ ); + + if ( eSum >= ScAutoSumSum ) + { + bool bContinue = false; + do + { + rRangeList.push_back( ScRange( nStartCol, nRow, nTab, nEndCol, nRow, nTab ) ); + nEndCol = static_cast< SCCOL >( nExtend ); + bContinue = lcl_FindNextSumEntryInRow( rDoc, nEndCol /*inout*/, nRow, nTab, nExtend /*out*/, aStart.Col() ); + if ( bContinue ) + { + nStartCol = nEndCol; + } + } while ( bContinue ); + } + else + { + while ( nStartCol > aStart.Col() ) + { + eSum = lcl_IsAutoSumData( rDoc, nStartCol-1, nRow, nTab, DIR_LEFT, nExtend /*out*/ ); + if (eSum >= ScAutoSumSum ) + break; + --nStartCol; + } + rRangeList.push_back( ScRange( nStartCol, nRow, nTab, nEndCol, nRow, nTab ) ); + if (eSum == ScAutoSumNone) + eSum = ScAutoSumData; + } + + return eSum; +} + +static sal_Int8 GetSubTotal( const OpCode eCode ) +{ + sal_Int8 val; + switch ( eCode ) + { + case ocSum : val = 9; + break; + case ocAverage : val = 1; + break; + case ocMax : val = 4; + break; + case ocMin : val = 5; + break; + case ocCount : val = 2; + break; + case ocCount2 : val = 3; + break; + case ocProduct : val = 6; + break; + case ocStDev : val = 7; + break; + case ocStDevP : val = 8; + break; + case ocVar : val = 10; + break; + case ocVarP : val = 11; + break; + default : val = 9; + } + + return val; +} + +bool ScViewFunc::GetAutoSumArea( ScRangeList& rRangeList ) +{ + ScDocument& rDoc = GetViewData().GetDocument(); + SCTAB nTab = GetViewData().GetTabNo(); + + SCCOL nCol = GetViewData().GetCurX(); + SCROW nRow = GetViewData().GetCurY(); + + SCCOL nStartCol = nCol; + SCROW nStartRow = nRow; + SCCOL nEndCol = nCol; + SCROW nEndRow = nRow; + SCCOL nSeekCol = nCol; + SCROW nSeekRow = nRow; + SCCOLROW nExtend; // will become valid via reference for ScAutoSumSum + + bool bCol = false; + bool bRow = false; + + ScAutoSum eSum; + if ( nRow != 0 + && ((eSum = lcl_IsAutoSumData( rDoc, nCol, nRow-1, nTab, + DIR_TOP, nExtend /*out*/ )) == ScAutoSumData ) + && ((eSum = lcl_IsAutoSumData( rDoc, nCol, nRow-1, nTab, + DIR_LEFT, nExtend /*out*/ )) == ScAutoSumData ) + ) + { + bRow = true; + nSeekRow = nRow - 1; + } + else if ( nCol != 0 && (eSum = lcl_IsAutoSumData( rDoc, nCol-1, nRow, nTab, + DIR_LEFT, nExtend /*out*/ )) == ScAutoSumData ) + { + bCol = true; + nSeekCol = nCol - 1; + } + else if ( (eSum = lcl_SeekAutoSumData( rDoc, nCol, nSeekRow, nTab, DIR_TOP, nExtend /*out*/ )) != ScAutoSumNone ) + bRow = true; + else if (( eSum = lcl_SeekAutoSumData( rDoc, nSeekCol, nRow, nTab, DIR_LEFT, nExtend /*out*/ )) != ScAutoSumNone ) + bCol = true; + + if ( bCol || bRow ) + { + if ( bRow ) + { + nStartRow = nSeekRow; // nSeekRow might be adjusted via reference + if ( eSum >= ScAutoSumSum && eSum < ScAutoSumEnd ) + nEndRow = nStartRow; // only sum sums + else + nEndRow = nRow - 1; // maybe extend data area at bottom + } + else + { + nStartCol = nSeekCol; // nSeekCol might be adjusted via reference + if ( eSum >= ScAutoSumSum ) + nEndCol = nStartCol; // only sum sums + else + nEndCol = nCol - 1; // maybe extend data area to the right + } + bool bContinue = false; + do + { + if ( eSum == ScAutoSumData ) + { + if ( bRow ) + { + while ( nStartRow != 0 && lcl_IsAutoSumData( rDoc, nCol, + nStartRow-1, nTab, DIR_TOP, nExtend /*out*/ ) == eSum ) + --nStartRow; + } + else + { + while ( nStartCol != 0 && lcl_IsAutoSumData( rDoc, nStartCol-1, + nRow, nTab, DIR_LEFT, nExtend /*out*/ ) == eSum ) + --nStartCol; + } + } + rRangeList.push_back( + ScRange( nStartCol, nStartRow, nTab, nEndCol, nEndRow, nTab ) ); + if ( eSum >= ScAutoSumSum ) + { + if ( bRow ) + { + nEndRow = static_cast< SCROW >( nExtend ); + bContinue = lcl_FindNextSumEntryInColumn( rDoc, nCol, nEndRow /*inout*/, nTab, nExtend /*out*/, 0 ); + if ( bContinue ) + { + nStartRow = nEndRow; + } + } + else + { + nEndCol = static_cast< SCCOL >( nExtend ); + bContinue = lcl_FindNextSumEntryInRow( rDoc, nEndCol /*inout*/, nRow, nTab, nExtend /*out*/, 0 ); + if ( bContinue ) + { + nStartCol = nEndCol; + } + } + } + } while ( bContinue ); + return true; + } + return false; +} + +void ScViewFunc::EnterAutoSum(const ScRangeList& rRangeList, bool bSubTotal, const ScAddress& rAddr, const OpCode eCode) +{ + OUString aFormula = GetAutoSumFormula( rRangeList, bSubTotal, rAddr , eCode); + EnterBlock( aFormula, nullptr ); +} + +bool ScViewFunc::AutoSum( const ScRange& rRange, bool bSubTotal, bool bSetCursor, bool bContinue , const OpCode eCode) +{ + ScDocument& rDoc = GetViewData().GetDocument(); + const SCTAB nTab = rRange.aStart.Tab(); + SCCOL nStartCol = rRange.aStart.Col(); + SCROW nStartRow = rRange.aStart.Row(); + const SCCOL nEndCol = rRange.aEnd.Col(); + const SCROW nEndRow = rRange.aEnd.Row(); + SCCOLROW nExtend = 0; // out parameter for lcl_IsAutoSumData + + // ignore rows at the top of the given range which don't contain autosum data + bool bRowData = false; + for ( SCROW nRow = nStartRow; nRow <= nEndRow; ++nRow ) + { + for ( SCCOL nCol = nStartCol; nCol <= nEndCol; ++nCol ) + { + if ( lcl_IsAutoSumData( rDoc, nCol, nRow, nTab, DIR_TOP, nExtend ) != ScAutoSumNone ) + { + bRowData = true; + break; + } + } + if ( bRowData ) + { + nStartRow = nRow; + break; + } + } + if ( !bRowData ) + { + return false; + } + + // ignore columns at the left of the given range which don't contain autosum data + bool bColData = false; + for ( SCCOL nCol = nStartCol; nCol <= nEndCol; ++nCol ) + { + for ( SCROW nRow = nStartRow; nRow <= nEndRow; ++nRow ) + { + if ( lcl_IsAutoSumData( rDoc, nCol, nRow, nTab, DIR_LEFT, nExtend ) != ScAutoSumNone ) + { + bColData = true; + break; + } + } + if ( bColData ) + { + nStartCol = nCol; + break; + } + } + if ( !bColData ) + { + return false; + } + + const bool bEndRowEmpty = rDoc.IsBlockEmpty( nStartCol, nEndRow, nEndCol, nEndRow, nTab ); + const bool bEndColEmpty = rDoc.IsBlockEmpty( nEndCol, nStartRow, nEndCol, nEndRow, nTab ); + bool bRow = ( nStartRow != nEndRow ) && ( bEndRowEmpty || !bEndColEmpty ); + bool bCol = ( nStartCol != nEndCol ) && ( bEndColEmpty || nStartRow == nEndRow ); + + // find an empty row for entering the result + SCROW nInsRow = nEndRow; + if ( bRow && !bEndRowEmpty ) + { + if ( nInsRow < rDoc.MaxRow() ) + { + ++nInsRow; + while ( !rDoc.IsBlockEmpty( nStartCol, nInsRow, nEndCol, nInsRow, nTab ) ) + { + if ( nInsRow < rDoc.MaxRow() ) + { + ++nInsRow; + } + else + { + bRow = false; + break; + } + } + } + else + { + bRow = false; + } + } + + // find an empty column for entering the result + SCCOL nInsCol = nEndCol; + if ( bCol && !bEndColEmpty ) + { + if ( nInsCol < rDoc.MaxCol() ) + { + ++nInsCol; + while ( !rDoc.IsBlockEmpty( nInsCol, nStartRow, nInsCol, nEndRow, nTab ) ) + { + if ( nInsCol < rDoc.MaxCol() ) + { + ++nInsCol; + } + else + { + bCol = false; + break; + } + } + } + else + { + bCol = false; + } + } + + if ( !bRow && !bCol ) + { + return false; + } + + SCCOL nMarkEndCol = nEndCol; + SCROW nMarkEndRow = nEndRow; + ScAutoSum eSum = ScAutoSumNone; + SCROW nColSums = 0; + SCCOL nRowSums = 0; + SCROW nColSumsStartRow = 0; + SCCOL nRowSumsStartCol = 0; + + if ( bRow ) + { + // calculate the row sums for all columns of the given range + + SCROW nSumEndRow = nEndRow; + + if ( bEndRowEmpty ) + { + // the last row of the given range is empty; + // don't take into account for calculating the autosum + --nSumEndRow; + } + else + { + // increase mark range + ++nMarkEndRow; + } + + for ( SCCOL nCol = nStartCol; nCol <= nEndCol; ++nCol ) + { + if ( !rDoc.IsBlockEmpty( nCol, nStartRow, nCol, nSumEndRow, nTab ) ) + { + ScRangeList aRangeList; + // Include the originally selected start row. + const ScRange aRange( nCol, rRange.aStart.Row(), nTab, nCol, nSumEndRow, nTab ); + if ( (eSum = lcl_GetAutoSumForColumnRange( rDoc, aRangeList, aRange )) != ScAutoSumNone ) + { + if (++nRowSums == 1) + nRowSumsStartCol = aRangeList[0].aStart.Col(); + const OUString aFormula = GetAutoSumFormula( + aRangeList, bSubTotal, ScAddress(nCol, nInsRow, nTab), eCode); + EnterData( nCol, nInsRow, nTab, aFormula ); + } + } + } + } + + if ( bCol ) + { + // calculate the column sums for all rows of the given range + + SCCOL nSumEndCol = nEndCol; + + if ( bEndColEmpty ) + { + // the last column of the given range is empty; + // don't take into account for calculating the autosum + --nSumEndCol; + } + else + { + // increase mark range + ++nMarkEndCol; + } + + for ( SCROW nRow = nStartRow; nRow <= nEndRow; ++nRow ) + { + if ( !rDoc.IsBlockEmpty( nStartCol, nRow, nSumEndCol, nRow, nTab ) ) + { + ScRangeList aRangeList; + // Include the originally selected start column. + const ScRange aRange( rRange.aStart.Col(), nRow, nTab, nSumEndCol, nRow, nTab ); + if ( (eSum = lcl_GetAutoSumForRowRange( rDoc, aRangeList, aRange )) != ScAutoSumNone ) + { + if (++nColSums == 1) + nColSumsStartRow = aRangeList[0].aStart.Row(); + const OUString aFormula = GetAutoSumFormula( aRangeList, bSubTotal, ScAddress(nInsCol, nRow, nTab), eCode ); + EnterData( nInsCol, nRow, nTab, aFormula ); + } + } + } + } + + // Set new mark range and cursor position. + // For sum of sums (and data until sum) mark the actual resulting range if + // there is only one, or the data range if more than one. Otherwise use the + // original selection. All extended by end column/row where the sum is put. + const ScRange aMarkRange( + (eSum >= ScAutoSumSum ? + (nRowSums == 1 ? nRowSumsStartCol : nStartCol) : + rRange.aStart.Col()), + (eSum >= ScAutoSumSum ? + (nColSums == 1 ? nColSumsStartRow : nStartRow) : + rRange.aStart.Row()), + nTab, nMarkEndCol, nMarkEndRow, nTab ); + MarkRange( aMarkRange, false, bContinue ); + if ( bSetCursor ) + { + SetCursor( nMarkEndCol, nMarkEndRow ); + } + + return true; +} + +OUString ScViewFunc::GetAutoSumFormula( const ScRangeList& rRangeList, bool bSubTotal, const ScAddress& rAddr , const OpCode eCode) +{ + ScViewData& rViewData = GetViewData(); + ScDocument& rDoc = rViewData.GetDocument(); + ScTokenArray aArray(rDoc); + + aArray.AddOpCode(bSubTotal ? ocSubTotal : eCode); + aArray.AddOpCode(ocOpen); + + if (bSubTotal) + { + aArray.AddDouble( GetSubTotal( eCode ) ); + aArray.AddOpCode(ocSep); + } + + if(!rRangeList.empty()) + { + ScRangeList aRangeList = rRangeList; + size_t ListSize = aRangeList.size(); + for ( size_t i = 0; i < ListSize; ++i ) + { + const ScRange & r = aRangeList[i]; + if (i != 0) + aArray.AddOpCode(ocSep); + ScComplexRefData aRef; + aRef.InitRangeRel(rDoc, r, rAddr); + aArray.AddDoubleReference(aRef); + } + } + + aArray.AddOpCode(ocClose); + + ScCompiler aComp(rDoc, rAddr, aArray, rDoc.GetGrammar()); + OUStringBuffer aBuf; + aComp.CreateStringFromTokenArray(aBuf); + OUString aFormula = aBuf.makeStringAndClear(); + aBuf.append('='); + aBuf.append(aFormula); + return aBuf.makeStringAndClear(); +} + +void ScViewFunc::EnterBlock( const OUString& rString, const EditTextObject* pData ) +{ + // test for multi selection + + SCCOL nCol = GetViewData().GetCurX(); + SCROW nRow = GetViewData().GetCurY(); + SCTAB nTab = GetViewData().GetTabNo(); + ScMarkData& rMark = GetViewData().GetMarkData(); + if ( rMark.IsMultiMarked() ) + { + rMark.MarkToSimple(); + if ( rMark.IsMultiMarked() ) + { // "Insert into multi selection not possible" + ErrorMessage(STR_MSSG_PASTEFROMCLIP_0); + + // insert into single cell + if ( pData ) + EnterData(nCol, nRow, nTab, *pData); + else + EnterData( nCol, nRow, nTab, rString ); + return; + } + } + + if (GetViewData().SelectionForbidsCellFill()) + { + PaintArea(nCol, nRow, nCol, nRow); // possibly the edit-engine is still painted there + return; + } + + ScDocument& rDoc = GetViewData().GetDocument(); + OUString aNewStr = rString; + if ( pData ) + { + const ScPatternAttr* pOldPattern = rDoc.GetPattern( nCol, nRow, nTab ); + ScTabEditEngine aEngine( *pOldPattern, rDoc.GetEnginePool(), &rDoc ); + aEngine.SetTextCurrentDefaults(*pData); + + ScEditAttrTester aTester( &aEngine ); + if (!aTester.NeedsObject()) + { + aNewStr = aEngine.GetText(); + pData = nullptr; + } + } + + // Insert via PasteFromClip + weld::WaitObject aWait(GetViewData().GetDialogParent()); + + ScAddress aPos( nCol, nRow, nTab ); + + ScDocumentUniquePtr pInsDoc(new ScDocument( SCDOCMODE_CLIP )); + pInsDoc->ResetClip( &rDoc, nTab ); + + if (aNewStr[0] == '=') // Formula ? + { + // SetString not possible, because in Clipboard-Documents nothing will be compiled! + pInsDoc->SetFormulaCell(aPos, new ScFormulaCell(rDoc, aPos, aNewStr)); + } + else if ( pData ) + { + // A copy of pData will be stored. + pInsDoc->SetEditText(aPos, *pData, rDoc.GetEditPool()); + } + else + pInsDoc->SetString( nCol, nRow, nTab, aNewStr ); + + pInsDoc->SetClipArea( ScRange(aPos) ); + // insert Block, with Undo etc. + if ( !PasteFromClip( InsertDeleteFlags::CONTENTS, pInsDoc.get(), ScPasteFunc::NONE, false, false, + false, INS_NONE, InsertDeleteFlags::ATTRIB ) ) + return; + + const SfxUInt32Item* pItem = pInsDoc->GetAttr( + nCol, nRow, nTab, ATTR_VALUE_FORMAT ); + if ( pItem ) + { // set number format if incompatible + // MarkData was already MarkToSimple'ed in PasteFromClip + const ScRange& aRange = rMark.GetMarkArea(); + ScPatternAttr aPattern( rDoc.GetPool() ); + aPattern.GetItemSet().Put( *pItem ); + SvNumFormatType nNewType = rDoc.GetFormatTable()->GetType( pItem->GetValue() ); + rDoc.ApplyPatternIfNumberformatIncompatible( aRange, rMark, + aPattern, nNewType ); + } +} + +// manual page break + +void ScViewFunc::InsertPageBreak( bool bColumn, bool bRecord, const ScAddress* pPos, + bool bSetModified ) +{ + SCTAB nTab = GetViewData().GetTabNo(); + ScAddress aCursor; + if (pPos) + aCursor = *pPos; + else + aCursor = ScAddress( GetViewData().GetCurX(), GetViewData().GetCurY(), nTab ); + + bool bSuccess = GetViewData().GetDocShell()->GetDocFunc(). + InsertPageBreak( bColumn, aCursor, bRecord, bSetModified ); + + if ( bSuccess && bSetModified ) + UpdatePageBreakData( true ); // for PageBreak-Mode +} + +void ScViewFunc::DeletePageBreak( bool bColumn, bool bRecord, const ScAddress* pPos, + bool bSetModified ) +{ + SCTAB nTab = GetViewData().GetTabNo(); + ScAddress aCursor; + if (pPos) + aCursor = *pPos; + else + aCursor = ScAddress( GetViewData().GetCurX(), GetViewData().GetCurY(), nTab ); + + bool bSuccess = GetViewData().GetDocShell()->GetDocFunc(). + RemovePageBreak( bColumn, aCursor, bRecord, bSetModified ); + + if ( bSuccess && bSetModified ) + UpdatePageBreakData( true ); // for PageBreak-Mode +} + +void ScViewFunc::RemoveManualBreaks() +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + SCTAB nTab = GetViewData().GetTabNo(); + bool bUndo(rDoc.IsUndoEnabled()); + + if (bUndo) + { + ScDocumentUniquePtr pUndoDoc(new ScDocument( SCDOCMODE_UNDO )); + pUndoDoc->InitUndo( rDoc, nTab, nTab, true, true ); + rDoc.CopyToDocument( 0,0,nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab, InsertDeleteFlags::NONE, false, *pUndoDoc ); + pDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoRemoveBreaks>( pDocSh, nTab, std::move(pUndoDoc) ) ); + } + + rDoc.RemoveManualBreaks(nTab); + rDoc.UpdatePageBreaks(nTab); + + UpdatePageBreakData( true ); + pDocSh->SetDocumentModified(); + pDocSh->PostPaint( 0,0,nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab, PaintPartFlags::Grid ); +} + +void ScViewFunc::SetPrintZoom(sal_uInt16 nScale) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + SCTAB nTab = GetViewData().GetTabNo(); + pDocSh->SetPrintZoom( nTab, nScale, 0/*nPages*/ ); +} + +void ScViewFunc::AdjustPrintZoom() +{ + ScRange aRange; + if ( GetViewData().GetSimpleArea( aRange ) != SC_MARK_SIMPLE ) + aRange = GetViewData().GetMarkData().GetMultiMarkArea(); + GetViewData().GetDocShell()->AdjustPrintZoom( aRange ); +} + +void ScViewFunc::SetPrintRanges( bool bEntireSheet, const OUString* pPrint, + const OUString* pRepCol, const OUString* pRepRow, + bool bAddPrint ) +{ + // on all selected tables + + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + ScMarkData& rMark = GetViewData().GetMarkData(); + bool bUndo (rDoc.IsUndoEnabled()); + + std::unique_ptr<ScPrintRangeSaver> pOldRanges = rDoc.CreatePrintRangeSaver(); + + ScAddress::Details aDetails(rDoc.GetAddressConvention(), 0, 0); + + for (const SCTAB& nTab : rMark) + { + ScRange aRange( 0,0,nTab ); + + // print ranges + + if( !bAddPrint ) + rDoc.ClearPrintRanges( nTab ); + + if( bEntireSheet ) + { + rDoc.SetPrintEntireSheet( nTab ); + } + else if ( pPrint ) + { + if ( !pPrint->isEmpty() ) + { + const sal_Unicode sep = ScCompiler::GetNativeSymbolChar(ocSep); + sal_Int32 nPos = 0; + do + { + const OUString aToken = pPrint->getToken(0, sep, nPos); + if ( aRange.ParseAny( aToken, rDoc, aDetails ) & ScRefFlags::VALID ) + rDoc.AddPrintRange( nTab, aRange ); + } + while (nPos >= 0); + } + } + else // NULL = use selection (print range is always set), use empty string to delete all ranges + { + if ( GetViewData().GetSimpleArea( aRange ) == SC_MARK_SIMPLE ) + { + rDoc.AddPrintRange( nTab, aRange ); + } + else if ( rMark.IsMultiMarked() ) + { + rMark.MarkToMulti(); + ScRangeListRef pList( new ScRangeList ); + rMark.FillRangeListWithMarks( pList.get(), false ); + for (size_t i = 0, n = pList->size(); i < n; ++i) + { + const ScRange & rR = (*pList)[i]; + rDoc.AddPrintRange(nTab, rR); + } + } + } + + // repeat columns + + if ( pRepCol ) + { + if ( pRepCol->isEmpty() ) + rDoc.SetRepeatColRange( nTab, std::nullopt ); + else + if ( aRange.ParseAny( *pRepCol, rDoc, aDetails ) & ScRefFlags::VALID ) + rDoc.SetRepeatColRange( nTab, std::move(aRange) ); + } + + // repeat rows + + if ( pRepRow ) + { + if ( pRepRow->isEmpty() ) + rDoc.SetRepeatRowRange( nTab, std::nullopt ); + else + if ( aRange.ParseAny( *pRepRow, rDoc, aDetails ) & ScRefFlags::VALID ) + rDoc.SetRepeatRowRange( nTab, std::move(aRange) ); + } + } + + // undo (for all tables) + if (bUndo) + { + SCTAB nCurTab = GetViewData().GetTabNo(); + std::unique_ptr<ScPrintRangeSaver> pNewRanges = rDoc.CreatePrintRangeSaver(); + if (comphelper::LibreOfficeKit::isActive()) + { + tools::JsonWriter aJsonWriter; + pNewRanges->GetPrintRangesInfo(aJsonWriter); + + SfxViewShell* pViewShell = GetViewData().GetViewShell(); + const std::string message = aJsonWriter.extractAsStdString(); + pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_PRINT_RANGES, message.c_str()); + } + + pDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoPrintRange>( pDocSh, nCurTab, std::move(pOldRanges), std::move(pNewRanges) ) ); + } + else + pOldRanges.reset(); + + // update page breaks + + for (const auto& rTab : rMark) + ScPrintFunc( pDocSh, pDocSh->GetPrinter(), rTab ).UpdatePages(); + + SfxBindings& rBindings = GetViewData().GetBindings(); + rBindings.Invalidate( SID_DELETE_PRINTAREA ); + + pDocSh->SetDocumentModified(); +} + +// Merge cells + +bool ScViewFunc::TestMergeCells() // pre-test (for menu) +{ + // simple test: true if there's a selection but no multi selection and not filtered + + const ScMarkData& rMark = GetViewData().GetMarkData(); + if ( rMark.IsMarked() || rMark.IsMultiMarked() ) + { + ScRange aRange; + bool bMergeable = ( GetViewData().GetSimpleArea( aRange ) == SC_MARK_SIMPLE ); + bMergeable = bMergeable && ( aRange.aStart.Col() != aRange.aEnd.Col() || + aRange.aStart.Row() != aRange.aEnd.Row() ); + return bMergeable; + } + else + return false; +} + +bool ScViewFunc::MergeCells( bool bApi, bool& rDoContents, bool bCenter ) +{ + // Editable- and Being-Nested- test must be at the beginning (in DocFunc too), + // so that the Contents-QueryBox won't appear + ScEditableTester aTester( this ); + if (!aTester.IsEditable()) + { + ErrorMessage(aTester.GetMessageId()); + return false; + } + + ScMarkData& rMark = GetViewData().GetMarkData(); + rMark.MarkToSimple(); + if (!rMark.IsMarked()) + { + ErrorMessage(STR_NOMULTISELECT); + return false; + } + + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + + const ScRange& aMarkRange = rMark.GetMarkArea(); + SCCOL nStartCol = aMarkRange.aStart.Col(); + SCROW nStartRow = aMarkRange.aStart.Row(); + SCTAB nStartTab = aMarkRange.aStart.Tab(); + SCCOL nEndCol = aMarkRange.aEnd.Col(); + SCROW nEndRow = aMarkRange.aEnd.Row(); + SCTAB nEndTab = aMarkRange.aEnd.Tab(); + if ( nStartCol == nEndCol && nStartRow == nEndRow ) + { + // nothing to do + return true; + } + + if ( rDoc.HasAttrib( nStartCol, nStartRow, nStartTab, nEndCol, nEndRow, nEndTab, + HasAttrFlags::Merged | HasAttrFlags::Overlapped ) ) + { // "Don't nest merging !" + ErrorMessage(STR_MSSG_MERGECELLS_0); + return false; + } + + // Check for the contents of all selected tables. + bool bAskDialog = false; + ScCellMergeOption aMergeOption(nStartCol, nStartRow, nEndCol, nEndRow, bCenter); + for (const SCTAB& i : rMark) + { + aMergeOption.maTabs.insert(i); + + sc::MultiDataCellState aState = rDoc.HasMultipleDataCells(aMergeOption.getSingleRange(i)); + switch (aState.meState) + { + case sc::MultiDataCellState::HasMultipleCells: + { + // this range contains multiple data cells. + bAskDialog = true; + break; + } + case sc::MultiDataCellState::HasOneCell: + { + // this range contains only one data cell. + if (nStartCol != aState.mnCol1 || nStartRow != aState.mnRow1) + rDoContents = true; // move the value to the top-left. + break; + } + default: + ; + } + } + + bool bOk = true; + bool bEmptyMergedCells = officecfg::Office::Calc::Compatibility::MergeCells::EmptyMergedCells::get(); + + if (bAskDialog) + { + bool bShowDialog = officecfg::Office::Calc::Compatibility::MergeCells::ShowDialog::get(); + if (!bApi && bShowDialog) + { + ScMergeCellsDialog aBox(GetViewData().GetDialogParent()); + sal_uInt16 nRetVal = aBox.run(); + + if ( nRetVal == RET_OK ) + { + switch (aBox.GetMergeCellsOption()) + { + case MoveContentHiddenCells: + rDoContents = true; + break; + case KeepContentHiddenCells: + bEmptyMergedCells = false; + break; + case EmptyContentHiddenCells: + bEmptyMergedCells = true; + break; + default: + assert(!"Unknown option for merge cells."); + break; + } + } + else if ( nRetVal == RET_CANCEL ) + bOk = false; + } + } + + if (bOk) + { + bOk = pDocSh->GetDocFunc().MergeCells( aMergeOption, rDoContents, true/*bRecord*/, bApi, bEmptyMergedCells ); + + if (bOk) + { + SetCursor( nStartCol, nStartRow ); + //DoneBlockMode( sal_False); + Unmark(); + + pDocSh->UpdateOle(GetViewData()); + UpdateInputLine(); + + OUString aStartAddress = aMarkRange.aStart.GetColRowString(); + OUString aEndAddress = aMarkRange.aEnd.GetColRowString(); + + collectUIInformation({{"RANGE", aStartAddress + ":" + aEndAddress}}, "MERGE_CELLS"); + } + } + + return bOk; +} + +bool ScViewFunc::TestRemoveMerge() +{ + bool bMerged = false; + ScRange aRange; + if (GetViewData().GetSimpleArea( aRange ) == SC_MARK_SIMPLE) + { + ScDocument& rDoc = GetViewData().GetDocument(); + if ( rDoc.HasAttrib( aRange, HasAttrFlags::Merged ) ) + bMerged = true; + } + return bMerged; +} + +static bool lcl_extendMergeRange(ScCellMergeOption& rOption, const ScRange& rRange) +{ + bool bExtended = false; + if (rOption.mnStartCol > rRange.aStart.Col()) + { + rOption.mnStartCol = rRange.aStart.Col(); + bExtended = true; + } + if (rOption.mnStartRow > rRange.aStart.Row()) + { + rOption.mnStartRow = rRange.aStart.Row(); + bExtended = true; + } + if (rOption.mnEndCol < rRange.aEnd.Col()) + { + rOption.mnEndCol = rRange.aEnd.Col(); + bExtended = true; + } + if (rOption.mnEndRow < rRange.aEnd.Row()) + { + rOption.mnEndRow = rRange.aEnd.Row(); + bExtended = true; + } + return bExtended; +} + +bool ScViewFunc::RemoveMerge() +{ + ScRange aRange; + ScEditableTester aTester( this ); + if (!aTester.IsEditable()) + { + ErrorMessage(aTester.GetMessageId()); + return false; + } + else if (GetViewData().GetSimpleArea( aRange ) == SC_MARK_SIMPLE) + { + ScDocument& rDoc = GetViewData().GetDocument(); + ScRange aExtended( aRange ); + rDoc.ExtendMerge( aExtended ); + ScDocShell* pDocSh = GetViewData().GetDocShell(); + const ScMarkData& rMark = GetViewData().GetMarkData(); + ScCellMergeOption aOption(aRange.aStart.Col(), aRange.aStart.Row(), aRange.aEnd.Col(), aRange.aEnd.Row()); + bool bExtended = false; + do + { + bExtended = false; + for (const SCTAB& i : rMark) + { + aOption.maTabs.insert(i); + aExtended.aStart.SetTab(i); + aExtended.aEnd.SetTab(i); + rDoc.ExtendMerge(aExtended); + rDoc.ExtendOverlapped(aExtended); + + // Expand the current range to be inclusive of all merged + // areas on all sheets. + bExtended = lcl_extendMergeRange(aOption, aExtended); + } + } + while (bExtended); + + bool bOk = pDocSh->GetDocFunc().UnmergeCells(aOption, true/*bRecord*/, nullptr); + aExtended = aOption.getFirstSingleRange(); + MarkRange( aExtended ); + + if (bOk) + pDocSh->UpdateOle(GetViewData()); + } + + OUString aCellLocation = aRange.aStart.GetColRowString(); + collectUIInformation({{"CELL", aCellLocation}}, "UNMERGE_CELL"); + + return true; //! bOk ?? +} + +void ScViewFunc::FillSimple( FillDir eDir ) +{ + ScRange aRange; + if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE) + { + ScDocShell* pDocSh = GetViewData().GetDocShell(); + const ScMarkData& rMark = GetViewData().GetMarkData(); + bool bSuccess = pDocSh->GetDocFunc().FillSimple( aRange, &rMark, eDir, false ); + if (bSuccess) + { + pDocSh->UpdateOle(GetViewData()); + UpdateScrollBars(); + + auto& rDoc = pDocSh->GetDocument(); + bool bDoAutoSpell = rDoc.GetDocOptions().IsAutoSpell(); + if ( bDoAutoSpell ) + { + // Copy AutoSpellData from above(left/right/below) if no selection. + switch (eDir) + { + case FILL_TO_BOTTOM: + if (aRange.aStart.Row() > 0 && aRange.aStart.Row() == aRange.aEnd.Row()) + aRange.aStart.IncRow(-1); + break; + case FILL_TO_TOP: + if (aRange.aEnd.Row() < rDoc.MaxRow() && aRange.aStart.Row() == aRange.aEnd.Row()) + aRange.aEnd.IncRow(1); + break; + case FILL_TO_RIGHT: + if (aRange.aStart.Col() > 0 && aRange.aStart.Col() == aRange.aEnd.Col()) + aRange.aStart.IncCol(-1); + break; + case FILL_TO_LEFT: + if (aRange.aEnd.Col() < rDoc.MaxCol() && aRange.aStart.Col() == aRange.aEnd.Col()) + aRange.aEnd.IncCol(1); + break; + } + CopyAutoSpellData(eDir, aRange.aStart.Col(), aRange.aStart.Row(), aRange.aEnd.Col(), aRange.aEnd.Row(), + ::std::numeric_limits<sal_uLong>::max()); + } + + // Invalidate cell slots and update input line with new content. + CellContentChanged(); + } + } + else + ErrorMessage(STR_NOMULTISELECT); +} + +void ScViewFunc::FillSeries( FillDir eDir, FillCmd eCmd, FillDateCmd eDateCmd, + double fStart, double fStep, double fMax ) +{ + ScRange aRange; + if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE) + { + ScDocShell* pDocSh = GetViewData().GetDocShell(); + const ScMarkData& rMark = GetViewData().GetMarkData(); + bool bSuccess = pDocSh->GetDocFunc(). + FillSeries( aRange, &rMark, eDir, eCmd, eDateCmd, + fStart, fStep, fMax, false ); + if (bSuccess) + { + pDocSh->UpdateOle(GetViewData()); + UpdateScrollBars(); + + HelperNotifyChanges::NotifyIfChangesListeners(*pDocSh, aRange); + } + } + else + ErrorMessage(STR_NOMULTISELECT); +} + +void ScViewFunc::FillAuto( FillDir eDir, SCCOL nStartCol, SCROW nStartRow, + SCCOL nEndCol, SCROW nEndRow, sal_uLong nCount ) +{ + SCTAB nTab = GetViewData().GetTabNo(); + ScRange aRange( nStartCol,nStartRow,nTab, nEndCol,nEndRow,nTab ); + ScRange aSourceRange( aRange ); + ScDocShell* pDocSh = GetViewData().GetDocShell(); + const ScMarkData& rMark = GetViewData().GetMarkData(); + bool bSuccess = pDocSh->GetDocFunc(). + FillAuto( aRange, &rMark, eDir, nCount, false ); + if (!bSuccess) + return; + + MarkRange( aRange, false ); // aRange was modified in FillAuto + pDocSh->UpdateOle(GetViewData()); + UpdateScrollBars(); + + bool bDoAutoSpell = pDocSh->GetDocument().GetDocOptions().IsAutoSpell(); + if ( bDoAutoSpell ) + CopyAutoSpellData(eDir, nStartCol, nStartRow, nEndCol, nEndRow, nCount); + + ScModelObj* pModelObj = HelperNotifyChanges::getMustPropagateChangesModel(*pDocSh); + if (!pModelObj) + return; + + ScRangeList aChangeRanges; + ScRange aChangeRange( aRange ); + switch (eDir) + { + case FILL_TO_BOTTOM: + aChangeRange.aStart.SetRow( aSourceRange.aEnd.Row() + 1 ); + break; + case FILL_TO_TOP: + aChangeRange.aEnd.SetRow( aSourceRange.aStart.Row() - 1 ); + break; + case FILL_TO_RIGHT: + aChangeRange.aStart.SetCol( aSourceRange.aEnd.Col() + 1 ); + break; + case FILL_TO_LEFT: + aChangeRange.aEnd.SetCol( aSourceRange.aStart.Col() - 1 ); + break; + default: + break; + } + aChangeRanges.push_back( aChangeRange ); + HelperNotifyChanges::Notify(*pModelObj, aChangeRanges); +} + +void ScViewFunc::CopyAutoSpellData( FillDir eDir, SCCOL nStartCol, SCROW nStartRow, + SCCOL nEndCol, SCROW nEndRow, sal_uLong nCount ) +{ + const ScDocument* pDoc = &GetViewData().GetDocument(); + SCTAB nTab = GetViewData().GetTabNo(); + CellType eCellType; + + ScGridWindow* pWin = GetActiveWin(); + if ( pWin->InsideVisibleRange(nStartCol, nStartRow) && pWin->InsideVisibleRange(nEndCol, nEndRow) ) + { + if ( nCount == ::std::numeric_limits<sal_uLong>::max() ) + { + switch( eDir ) + { + case FILL_TO_BOTTOM: + for ( SCCOL nColItr = nStartCol; nColItr <= nEndCol; ++nColItr ) + { + eCellType = pDoc->GetCellType(nColItr, nStartRow, nTab); // We need this optimization only for EditTextObject source cells + if (eCellType != CELLTYPE_EDIT) + continue; + + const std::vector<editeng::MisspellRanges>* pRanges = pWin->GetAutoSpellData(nColItr, nStartRow); + if ( !pRanges ) + continue; + for ( SCROW nRowItr = nStartRow + 1; nRowItr <= nEndRow; ++nRowItr ) + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + break; + case FILL_TO_TOP: + for ( SCCOL nColItr = nStartCol; nColItr <= nEndCol; ++nColItr ) + { + eCellType = pDoc->GetCellType(nColItr, nEndRow, nTab); // We need this optimization only for EditTextObject source cells + if (eCellType != CELLTYPE_EDIT) + continue; + + const std::vector<editeng::MisspellRanges>* pRanges = pWin->GetAutoSpellData(nColItr, nEndRow); + if ( !pRanges ) + continue; + for ( SCROW nRowItr = nEndRow - 1; nRowItr >= nStartRow; --nRowItr ) + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + break; + case FILL_TO_RIGHT: + for ( SCROW nRowItr = nStartRow; nRowItr <= nEndRow; ++nRowItr ) + { + eCellType = pDoc->GetCellType(nStartCol, nRowItr, nTab); // We need this optimization only for EditTextObject source cells + if (eCellType != CELLTYPE_EDIT) + continue; + + const std::vector<editeng::MisspellRanges>* pRanges = pWin->GetAutoSpellData(nStartCol, nRowItr); + if ( !pRanges ) + continue; + for ( SCCOL nColItr = nStartCol + 1; nColItr <= nEndCol; ++nColItr ) + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + break; + case FILL_TO_LEFT: + for ( SCROW nRowItr = nStartRow; nRowItr <= nEndRow; ++nRowItr ) + { + eCellType = pDoc->GetCellType(nEndCol, nRowItr, nTab); // We need this optimization only for EditTextObject source cells + if (eCellType != CELLTYPE_EDIT) + continue; + + const std::vector<editeng::MisspellRanges>* pRanges = pWin->GetAutoSpellData(nEndCol, nRowItr); + if ( !pRanges ) + continue; + for ( SCCOL nColItr = nEndCol - 1; nColItr >= nStartCol; --nColItr ) + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + break; + } + return; + } + + typedef const std::vector<editeng::MisspellRanges>* MisspellRangesType; + SCROW nRowRepeatSize = nEndRow - nStartRow + 1; + SCCOL nColRepeatSize = nEndCol - nStartCol + 1; + SCROW nTillRow = 0; + SCCOL nTillCol = 0; + std::vector<std::vector<MisspellRangesType>> aSourceSpellRanges(nRowRepeatSize, std::vector<MisspellRangesType>(nColRepeatSize, nullptr)); + + for ( SCROW nRowIdx = 0; nRowIdx < nRowRepeatSize; ++nRowIdx ) + { + for ( SCCOL nColIdx = 0; nColIdx < nColRepeatSize; ++nColIdx ) + { + eCellType = pDoc->GetCellType(nStartCol + nColIdx, nStartRow + nRowIdx, nTab); // We need this optimization only for EditTextObject source cells + if (eCellType != CELLTYPE_EDIT) + continue; + + aSourceSpellRanges[nRowIdx][nColIdx] = pWin->GetAutoSpellData( nStartCol + nColIdx, nStartRow + nRowIdx ); + } + } + + switch( eDir ) + { + case FILL_TO_BOTTOM: + nTillRow = nEndRow + nCount; + for ( SCCOL nColItr = nStartCol; nColItr <= nEndCol; ++nColItr ) + { + for ( SCROW nRowItr = nEndRow + 1; nRowItr <= nTillRow; ++nRowItr ) + { + size_t nSourceRowIdx = ( nRowItr - nEndRow - 1 ) % nRowRepeatSize; + MisspellRangesType pRanges = aSourceSpellRanges[nSourceRowIdx][nColItr - nStartCol]; + if ( !pRanges ) + continue; + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + } + break; + + case FILL_TO_TOP: + nTillRow = nStartRow - nCount; + for ( SCCOL nColItr = nStartCol; nColItr <= nEndCol; ++nColItr ) + { + for ( SCROW nRowItr = nStartRow - 1; nRowItr >= nTillRow; --nRowItr ) + { + size_t nSourceRowIdx = nRowRepeatSize - 1 - ( ( nStartRow - 1 - nRowItr ) % nRowRepeatSize ); + MisspellRangesType pRanges = aSourceSpellRanges[nSourceRowIdx][nColItr - nStartCol]; + if ( !pRanges ) + continue; + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + } + break; + + case FILL_TO_RIGHT: + nTillCol = nEndCol + nCount; + for ( SCCOL nColItr = nEndCol + 1; nColItr <= nTillCol; ++nColItr ) + { + size_t nSourceColIdx = ( nColItr - nEndCol - 1 ) % nColRepeatSize; + for ( SCROW nRowItr = nStartRow; nRowItr <= nEndRow; ++nRowItr ) + { + MisspellRangesType pRanges = aSourceSpellRanges[nRowItr - nStartRow][nSourceColIdx]; + if ( !pRanges ) + continue; + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + } + break; + + case FILL_TO_LEFT: + nTillCol = nStartCol - nCount; + for ( SCCOL nColItr = nStartCol - 1; nColItr >= nTillCol; --nColItr ) + { + size_t nSourceColIdx = nColRepeatSize - 1 - ( ( nStartCol - 1 - nColItr ) % nColRepeatSize ); + for ( SCROW nRowItr = nStartRow; nRowItr <= nEndRow; ++nRowItr ) + { + MisspellRangesType pRanges = aSourceSpellRanges[nRowItr - nStartRow][nSourceColIdx]; + if ( !pRanges ) + continue; + pWin->SetAutoSpellData(nColItr, nRowItr, pRanges); + } + } + break; + } + } + else + pWin->ResetAutoSpellForContentChange(); + +} + +void ScViewFunc::FillTab( InsertDeleteFlags nFlags, ScPasteFunc nFunction, bool bSkipEmpty, bool bAsLink ) +{ + //! allow source sheet to be protected + ScEditableTester aTester( this ); + if (!aTester.IsEditable()) + { + ErrorMessage(aTester.GetMessageId()); + return; + } + + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + ScMarkData& rMark = GetViewData().GetMarkData(); + SCTAB nTab = GetViewData().GetTabNo(); + bool bUndo(rDoc.IsUndoEnabled()); + + ScRange aMarkRange; + rMark.MarkToSimple(); + bool bMulti = rMark.IsMultiMarked(); + if (bMulti) + aMarkRange = rMark.GetMultiMarkArea(); + else if (rMark.IsMarked()) + aMarkRange = rMark.GetMarkArea(); + else + aMarkRange = ScRange( GetViewData().GetCurX(), GetViewData().GetCurY(), nTab ); + + ScDocumentUniquePtr pUndoDoc; + + if (bUndo) + { + pUndoDoc.reset(new ScDocument( SCDOCMODE_UNDO )); + pUndoDoc->InitUndo( rDoc, nTab, nTab ); + + for (const SCTAB& i : rMark) + if (i != nTab ) + { + pUndoDoc->AddUndoTab( i, i ); + aMarkRange.aStart.SetTab( i ); + aMarkRange.aEnd.SetTab( i ); + rDoc.CopyToDocument( aMarkRange, InsertDeleteFlags::ALL, bMulti, *pUndoDoc ); + } + } + + if (bMulti) + rDoc.FillTabMarked( nTab, rMark, nFlags, nFunction, bSkipEmpty, bAsLink ); + else + { + aMarkRange.aStart.SetTab( nTab ); + aMarkRange.aEnd.SetTab( nTab ); + rDoc.FillTab( aMarkRange, rMark, nFlags, nFunction, bSkipEmpty, bAsLink ); + } + + if (bUndo) + { //! for ChangeTrack not until the end + pDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoFillTable>( pDocSh, rMark, + aMarkRange.aStart.Col(), aMarkRange.aStart.Row(), nTab, + aMarkRange.aEnd.Col(), aMarkRange.aEnd.Row(), nTab, + std::move(pUndoDoc), bMulti, nTab, nFlags, nFunction, bSkipEmpty, bAsLink ) ); + } + + pDocSh->PostPaintGridAll(); + pDocSh->PostDataChanged(); +} + +/** Downward fill of selected cell(s) by double-clicking cross-hair cursor + + Either, extends a current selection if non-empty cells exist immediately + below the selection, overwriting cells below the selection up to the + minimum row of already filled cells. + + Or, extends a current selection down to the last non-empty cell of an + adjacent column when the lower-right corner of the selection is + double-clicked. It uses a left-adjoining non-empty column as a guide if + such is available, otherwise a right-adjoining non-empty column is used. + + @return No return value + + @see #i12313# +*/ +void ScViewFunc::FillCrossDblClick() +{ + ScRange aRange; + GetViewData().GetSimpleArea( aRange ); + aRange.PutInOrder(); + + SCTAB nTab = GetViewData().GetCurPos().Tab(); + SCCOL nStartX = aRange.aStart.Col(); + SCROW nStartY = aRange.aStart.Row(); + SCCOL nEndX = aRange.aEnd.Col(); + SCROW nEndY = aRange.aEnd.Row(); + + ScDocument& rDoc = GetViewData().GetDocument(); + + if (nEndY >= rDoc.MaxRow()) + // Nothing to fill. + return; + + // Make sure the selection is not empty + if ( rDoc.IsBlockEmpty( nStartX, nStartY, nEndX, nEndY, nTab ) ) + return; + + // If there is data in all columns immediately below the selection then + // switch to overwriting fill. + SCROW nOverWriteEndRow = rDoc.MaxRow(); + for (SCCOL nCol = nStartX; nCol <= nEndX; ++nCol) + { + if (rDoc.HasData( nCol, nEndY + 1, nTab)) + { + // Determine the shortest data column to end the fill. + SCROW nY = nEndY + 1; + // FindAreaPos() returns the start row of the next data block if + // the current row is the last row of a data block and an empty + // cell follows. Somewhat unexpected behaviour... + // So check beforehand if there is one non-empty cell following. + if (rDoc.HasData( nCol, nY + 1, nTab)) + { + rDoc.FindAreaPos( nCol, nY, nTab, SC_MOVE_DOWN); + if (nOverWriteEndRow > nY) + nOverWriteEndRow = nY; + } + else + { + nOverWriteEndRow = nY; + } + } + else + { + nOverWriteEndRow = 0; + break; // for + } + } + + if (nOverWriteEndRow > nEndY) + { + FillAuto( FILL_TO_BOTTOM, nStartX, nStartY, nEndX, nEndY, nOverWriteEndRow - nEndY); + return; + } + + // Non-overwriting fill follows. + + const bool bDataLeft = (nStartX > 0); + if (!bDataLeft && nEndX >= rDoc.MaxCol()) + // Absolutely no data left or right of selection. + return; + + // Check that there is + // 1) data immediately left (preferred) or right of start (row) of selection + // 2) data there below + // 3) no data immediately below selection + + SCCOL nMovX = (bDataLeft ? nStartX - 1 : nEndX + 1); + SCROW nMovY = nStartY; + bool bDataFound = (rDoc.HasData( nMovX, nStartY, nTab) && rDoc.HasData( nMovX, nStartY + 1, nTab)); + if (!bDataFound && bDataLeft && nEndX < rDoc.MaxCol()) + { + nMovX = nEndX + 1; // check right + bDataFound = (rDoc.HasData( nMovX, nStartY, nTab) && rDoc.HasData( nMovX, nStartY + 1, nTab)); + } + + if (!(bDataFound && rDoc.IsEmptyData( nStartX, nEndY + 1, nEndX, nEndY + 1, nTab ))) + return; + + // Get end of data left or right. + rDoc.FindAreaPos( nMovX, nMovY, nTab, SC_MOVE_DOWN); + // Find minimum end row of below empty area and data right. + for (SCCOL nX = nStartX; nX <= nEndX; ++nX) + { + SCROW nY = nEndY + 1; + // Get next row with data in this column. + rDoc.FindAreaPos( nX, nY, nTab, SC_MOVE_DOWN); + if (nMovY == rDoc.MaxRow() && nY == rDoc.MaxRow()) + { + // FindAreaPos() returns MAXROW also if there is no data at all + // from the start, so check if that contains data if the nearby + // (left or right) data ends there and increment if no data + // here, pretending the next data would be thereafter so nMovY + // will not be decremented. + if (!rDoc.HasData( nX, nY, nTab)) + ++nY; + } + if (nMovY > nY - 1) + nMovY = nY - 1; + } + + if (nMovY > nEndY) + { + FillAuto( FILL_TO_BOTTOM, nStartX, nStartY, nEndX, nEndY, nMovY - nEndY); + } +} + +void ScViewFunc::ConvertFormulaToValue() +{ + ScRange aRange; + GetViewData().GetSimpleArea(aRange); + aRange.PutInOrder(); + + ScDocShell* pDocSh = GetViewData().GetDocShell(); + pDocSh->GetDocFunc().ConvertFormulaToValue(aRange, true); + pDocSh->PostPaint(aRange, PaintPartFlags::Grid); +} + +void ScViewFunc::TransliterateText( TransliterationFlags nType ) +{ + ScMarkData aFuncMark = GetViewData().GetMarkData(); + if ( !aFuncMark.IsMarked() && !aFuncMark.IsMultiMarked() ) + { + // no selection -> use cursor position + + ScAddress aCursor( GetViewData().GetCurX(), GetViewData().GetCurY(), GetViewData().GetTabNo() ); + aFuncMark.SetMarkArea( ScRange( aCursor ) ); + } + + bool bSuccess = GetViewData().GetDocShell()->GetDocFunc(). + TransliterateText( aFuncMark, nType, false ); + if (bSuccess) + { + GetViewData().GetViewShell()->UpdateInputHandler(); + } +} + +// AutoFormat + +ScAutoFormatData* ScViewFunc::CreateAutoFormatData() +{ + ScAutoFormatData* pData = nullptr; + SCCOL nStartCol; + SCROW nStartRow; + SCTAB nStartTab; + SCCOL nEndCol; + SCROW nEndRow; + SCTAB nEndTab; + if (GetViewData().GetSimpleArea(nStartCol,nStartRow,nStartTab,nEndCol,nEndRow,nEndTab) == SC_MARK_SIMPLE) + { + if ( nEndCol-nStartCol >= 3 && nEndRow-nStartRow >= 3 ) + { + ScDocument& rDoc = GetViewData().GetDocument(); + pData = new ScAutoFormatData; + rDoc.GetAutoFormatData( nStartTab, nStartCol,nStartRow,nEndCol,nEndRow, *pData ); + } + } + return pData; +} + +void ScViewFunc::AutoFormat( sal_uInt16 nFormatNo ) +{ + ScRange aRange; + if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE) + { + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScMarkData& rMark = GetViewData().GetMarkData(); + + bool bSuccess = pDocSh->GetDocFunc().AutoFormat( aRange, &rMark, nFormatNo, false ); + if (bSuccess) + pDocSh->UpdateOle(GetViewData()); + } + else + ErrorMessage(STR_NOMULTISELECT); +} + +// Search & Replace + +bool ScViewFunc::SearchAndReplace( const SvxSearchItem* pSearchItem, + bool bAddUndo, bool bIsApi ) +{ + SvxSearchDialogWrapper::SetSearchLabel(SearchLabel::Empty); + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + ScMarkData& rMark = GetViewData().GetMarkData(); + if (bAddUndo && !rDoc.IsUndoEnabled()) + bAddUndo = false; + + if ( !rMark.IsMarked() && !rMark.IsMultiMarked() && (pSearchItem->HasStartPoint()) ) + { + // No selection -> but we have a start point (top left corner of the + // current view), start searching from there, not from the current + // cursor position. + SCCOL nPosX; + SCROW nPosY; + + int nPixelX = pSearchItem->GetStartPointX() * GetViewData().GetPPTX(); + int nPixelY = pSearchItem->GetStartPointY() * GetViewData().GetPPTY(); + + GetViewData().GetPosFromPixel(nPixelX, nPixelY, GetViewData().GetActivePart(), nPosX, nPosY); + + AlignToCursor( nPosX, nPosY, SC_FOLLOW_JUMP ); + SetCursor( nPosX, nPosY, true ); + } + + SCCOL nCol, nOldCol; + SCROW nRow, nOldRow; + SCTAB nTab, nOldTab; + nCol = nOldCol = GetViewData().GetCurX(); + nRow = nOldRow = GetViewData().GetCurY(); + nTab = nOldTab = GetViewData().GetTabNo(); + + SvxSearchCmd nCommand = pSearchItem->GetCommand(); + bool bAllTables = pSearchItem->IsAllTables(); + std::set<SCTAB> aOldSelectedTables; + SCTAB nLastTab = rDoc.GetTableCount() - 1; + SCTAB nStartTab, nEndTab; + if ( bAllTables ) + { + nStartTab = 0; + nEndTab = nLastTab; + std::set<SCTAB> aTmp(rMark.begin(), rMark.end()); + aOldSelectedTables.swap(aTmp); + } + else + { //! at least one is always selected + nStartTab = rMark.GetFirstSelected(); + nEndTab = rMark.GetLastSelected(); + } + + if ( nCommand == SvxSearchCmd::FIND + || nCommand == SvxSearchCmd::FIND_ALL) + bAddUndo = false; + + //! account for bAttrib during Undo !!! + + ScDocumentUniquePtr pUndoDoc; + std::unique_ptr<ScMarkData> pUndoMark; + OUString aUndoStr; + if (bAddUndo) + { + pUndoMark.reset(new ScMarkData(rMark)); // Mark is being modified + if ( nCommand == SvxSearchCmd::REPLACE_ALL ) + { + pUndoDoc.reset(new ScDocument(SCDOCMODE_UNDO)); + pUndoDoc->InitUndo( rDoc, nStartTab, nEndTab ); + } + } + + if ( bAllTables ) + { //! select all, after pUndoMark has been created + for ( SCTAB j = nStartTab; j <= nEndTab; j++ ) + { + rMark.SelectTable( j, true ); + } + } + + DoneBlockMode(true); // don't delete mark + InitOwnBlockMode( ScRange( nCol, nRow, nStartTab, nCol, nRow, nEndTab)); + + // If search starts at the beginning don't ask again whether it shall start at the beginning + bool bFirst = true; + if ( nCol == 0 && nRow == 0 && nTab == nStartTab && !pSearchItem->GetBackward() ) + bFirst = false; + + bool bFound = false; + while (true) + { + GetFrameWin()->EnterWait(); + ScRangeList aMatchedRanges; + if (rDoc.SearchAndReplace(*pSearchItem, nCol, nRow, nTab, rMark, aMatchedRanges, aUndoStr, pUndoDoc.get())) + { + bFound = true; + if (bAddUndo) + { + GetViewData().GetDocShell()->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoReplace>( GetViewData().GetDocShell(), *pUndoMark, + nCol, nRow, nTab, + aUndoStr, std::move(pUndoDoc), pSearchItem ) ); + } + + if (nCommand == SvxSearchCmd::FIND_ALL || nCommand == SvxSearchCmd::REPLACE_ALL) + { + SfxViewFrame* pViewFrm = SfxViewFrame::Current(); + bool bShow = GetViewData().GetViewShell()->GetViewData().GetOptions().GetOption( VOPT_SUMMARY ); + + if (bShow && pViewFrm && !comphelper::LibreOfficeKit::isActive()) + { + pViewFrm->ShowChildWindow(sc::SearchResultsDlgWrapper::GetChildWindowId()); + SfxChildWindow* pWnd = pViewFrm->GetChildWindow(sc::SearchResultsDlgWrapper::GetChildWindowId()); + if (pWnd) + { + sc::SearchResultsDlg* pDlg = static_cast<sc::SearchResultsDlg*>(pWnd->GetController().get()); + if (pDlg) + { + const bool bCellNotes = (pSearchItem->GetCellType() == SvxSearchCellType::NOTE); + // ScCellIterator iterates over cells with content, + // for empty cells iterate over match positions. + const bool bEmptyCells = (!bCellNotes + && ((nCommand == SvxSearchCmd::FIND_ALL + && ScDocument::IsEmptyCellSearch(*pSearchItem)) + || (nCommand == SvxSearchCmd::REPLACE_ALL + && pSearchItem->GetReplaceString().isEmpty()))); + pDlg->FillResults(rDoc, aMatchedRanges, bCellNotes, bEmptyCells); + } + } + } + + rMark.ResetMark(); + for (size_t i = 0, n = aMatchedRanges.size(); i < n; ++i) + { + const ScRange& r = aMatchedRanges[i]; + if (r.aStart.Tab() == nTab) + rMark.SetMultiMarkArea(r); + } + } + + break; // break 'while (TRUE)' + } + else if ( bFirst && (nCommand == SvxSearchCmd::FIND || + nCommand == SvxSearchCmd::REPLACE) ) + { + bFirst = false; + GetFrameWin()->LeaveWait(); + if (!bIsApi) + { + if ( nStartTab == nEndTab ) + SvxSearchDialogWrapper::SetSearchLabel(SearchLabel::EndSheet); + else + SvxSearchDialogWrapper::SetSearchLabel(SearchLabel::End); + + rDoc.GetSearchAndReplaceStart( *pSearchItem, nCol, nRow ); + if (pSearchItem->GetBackward()) + nTab = nEndTab; + else + nTab = nStartTab; + } + else + { + break; // break 'while (TRUE)' + } + } + else // nothing found + { + if ( nCommand == SvxSearchCmd::FIND_ALL || nCommand == SvxSearchCmd::REPLACE_ALL ) + { + pDocSh->PostPaintGridAll(); // Mark + } + + GetFrameWin()->LeaveWait(); + if (!bIsApi) + { + GetViewData().GetViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_SEARCH_NOT_FOUND, pSearchItem->GetSearchString().toUtf8().getStr()); + SvxSearchDialogWrapper::SetSearchLabel(SearchLabel::NotFound); + } + + break; // break 'while (TRUE)' + } + } // of while true + + if (!aOldSelectedTables.empty()) + { + // restore originally selected table + for (SCTAB i = 0; i <= nEndTab; ++i) + rMark.SelectTable(i, false); + + for (const auto& rTab : aOldSelectedTables) + rMark.SelectTable(rTab, true); + + if ( bFound ) + { // if a table is selected as a "match" it remains selected. + rMark.SelectTable( nTab, true ); + // It's a swap if only one table was selected before + //! otherwise now one table more might be selected + if ( aOldSelectedTables.size() == 1 && nTab != nOldTab ) + rMark.SelectTable( nOldTab, false ); + } + } + + // Avoid LOK selection notifications before we have all the results. + GetViewData().GetViewShell()->setTiledSearching(true); + MarkDataChanged(); + GetViewData().GetViewShell()->setTiledSearching(false); + + if ( bFound ) + { + if ( nTab != GetViewData().GetTabNo() ) + SetTabNo( nTab ); + + // if nothing is marked, DoneBlockMode, then marking can start + // directly from this place via Shift-Cursor + if (!rMark.IsMarked() && !rMark.IsMultiMarked()) + DoneBlockMode(true); + + AlignToCursor( nCol, nRow, SC_FOLLOW_JUMP ); + SetCursor( nCol, nRow, true ); + + if (comphelper::LibreOfficeKit::isActive()) + { + Point aCurPos = GetViewData().GetScrPos(nCol, nRow, GetViewData().GetActivePart()); + + // just update the cell selection + ScGridWindow* pGridWindow = GetViewData().GetActiveWin(); + // Don't move cell selection handles for find-all: selection of all but the first result would be lost. + if (pGridWindow && nCommand == SvxSearchCmd::FIND) + { + // move the cell selection handles + pGridWindow->SetCellSelectionPixel(LOK_SETTEXTSELECTION_RESET, aCurPos.X(), aCurPos.Y()); + pGridWindow->SetCellSelectionPixel(LOK_SETTEXTSELECTION_START, aCurPos.X(), aCurPos.Y()); + pGridWindow->SetCellSelectionPixel(LOK_SETTEXTSELECTION_END, aCurPos.X(), aCurPos.Y()); + } + + if (pGridWindow) + { + std::vector<tools::Rectangle> aLogicRects; + pGridWindow->GetCellSelection(aLogicRects); + + boost::property_tree::ptree aTree; + aTree.put("searchString", pSearchItem->GetSearchString().toUtf8().getStr()); + aTree.put("highlightAll", nCommand == SvxSearchCmd::FIND_ALL); + + boost::property_tree::ptree aSelections; + for (const tools::Rectangle& rLogicRect : aLogicRects) + { + boost::property_tree::ptree aSelection; + aSelection.put("part", OString::number(nTab).getStr()); + aSelection.put("rectangles", rLogicRect.toString().getStr()); + aSelections.push_back(std::make_pair("", aSelection)); + } + aTree.add_child("searchResultSelection", aSelections); + + std::stringstream aStream; + boost::property_tree::write_json(aStream, aTree); + OString aPayload = aStream.str().c_str(); + SfxViewShell* pViewShell = GetViewData().GetViewShell(); + pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_SEARCH_RESULT_SELECTION, aPayload.getStr()); + + // Trigger LOK_CALLBACK_TEXT_SELECTION now. + MarkDataChanged(); + } + } + + if ( nCommand == SvxSearchCmd::REPLACE + || nCommand == SvxSearchCmd::REPLACE_ALL ) + { + if ( nCommand == SvxSearchCmd::REPLACE ) + { + pDocSh->PostPaint( nCol,nRow,nTab, nCol,nRow,nTab, PaintPartFlags::Grid ); + + // jump to next cell if we replaced everything in the cell + // where the cursor was positioned (but avoid switching tabs) + if ( nCol == nOldCol && nRow == nOldRow && nTab == nOldTab ) + { + SvxSearchItem aSearchItem = ScGlobal::GetSearchItem(); + aSearchItem.SetCommand(SvxSearchCmd::FIND); + aSearchItem.SetWhich(SID_SEARCH_ITEM); + + ScRangeList aMatchedRanges; + ScTable::UpdateSearchItemAddressForReplace( aSearchItem, nCol, nRow ); + if ( rDoc.SearchAndReplace( aSearchItem, nCol, nRow, nTab, rMark, aMatchedRanges, aUndoStr ) && + ( nTab == nOldTab ) && + ( nCol != nOldCol || nRow != nOldRow ) ) + { + AlignToCursor(nCol, nRow, SC_FOLLOW_JUMP); + SetCursor( nCol, nRow, true ); + } + } + } + else + pDocSh->PostPaintGridAll(); + pDocSh->SetDocumentModified(); + } + else if ( nCommand == SvxSearchCmd::FIND_ALL ) + pDocSh->PostPaintGridAll(); // mark + GetFrameWin()->LeaveWait(); + } + return bFound; +} + +// Goal Seek + +void ScViewFunc::Solve( const ScSolveParam& rParam ) +{ + ScDocument& rDoc = GetViewData().GetDocument(); + + SCCOL nDestCol = rParam.aRefVariableCell.Col(); + SCROW nDestRow = rParam.aRefVariableCell.Row(); + SCTAB nDestTab = rParam.aRefVariableCell.Tab(); + + ScEditableTester aTester( rDoc, nDestTab, nDestCol,nDestRow, nDestCol,nDestRow ); + if (!aTester.IsEditable()) + { + ErrorMessage(aTester.GetMessageId()); + return; + } + + OUString aTargetValStr; + if ( rParam.pStrTargetVal ) + aTargetValStr = *rParam.pStrTargetVal; + + OUString aMsgStr; + OUString aResStr; + double nSolveResult; + + GetFrameWin()->EnterWait(); + + bool bExact = + rDoc.Solver( + rParam.aRefFormulaCell.Col(), + rParam.aRefFormulaCell.Row(), + rParam.aRefFormulaCell.Tab(), + nDestCol, nDestRow, nDestTab, + aTargetValStr, + nSolveResult ); + + GetFrameWin()->LeaveWait(); + + SvNumberFormatter* pFormatter = rDoc.GetFormatTable(); + sal_uLong nFormat = 0; + const ScPatternAttr* pPattern = rDoc.GetPattern( nDestCol, nDestRow, nDestTab ); + if ( pPattern ) + nFormat = pPattern->GetNumberFormat( pFormatter ); + const Color* p; + pFormatter->GetOutputString( nSolveResult, nFormat, aResStr, &p ); + + if ( bExact ) + { + aMsgStr += ScResId( STR_MSSG_SOLVE_0 ) + + aResStr + + ScResId( STR_MSSG_SOLVE_1 ); + } + else + { + aMsgStr = ScResId( STR_MSSG_SOLVE_2 ) + + ScResId( STR_MSSG_SOLVE_3 ) + + aResStr + + ScResId( STR_MSSG_SOLVE_4 ); + } + + std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(GetViewData().GetDialogParent(), + VclMessageType::Question, VclButtonsType::YesNo, aMsgStr)); + xBox->set_title(ScResId(STR_MSSG_DOSUBTOTALS_0)); + xBox->set_default_response(RET_NO); + if (xBox->run() == RET_YES) + EnterValue( nDestCol, nDestRow, nDestTab, nSolveResult ); + + GetViewData().GetViewShell()->UpdateInputHandler( true ); +} + +// multi operation + +void ScViewFunc::TabOp( const ScTabOpParam& rParam, bool bRecord ) +{ + ScRange aRange; + if (GetViewData().GetSimpleArea(aRange) == SC_MARK_SIMPLE) + { + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScMarkData& rMark = GetViewData().GetMarkData(); + pDocSh->GetDocFunc().TabOp( aRange, &rMark, rParam, bRecord, false ); + } + else + ErrorMessage(STR_NOMULTISELECT); +} + +void ScViewFunc::MakeScenario( const OUString& rName, const OUString& rComment, + const Color& rColor, ScScenarioFlags nFlags ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScMarkData& rMark = GetViewData().GetMarkData(); + SCTAB nTab = GetViewData().GetTabNo(); + + SCTAB nNewTab = pDocSh->MakeScenario( nTab, rName, rComment, rColor, nFlags, rMark ); + if (nFlags & ScScenarioFlags::CopyAll) + SetTabNo( nNewTab, true ); // ScScenarioFlags::CopyAll -> visible + else + { + SfxBindings& rBindings = GetViewData().GetBindings(); + rBindings.Invalidate( SID_STATUS_DOCPOS ); // Statusbar + rBindings.Invalidate( SID_ROWCOL_SELCOUNT ); // Statusbar + rBindings.Invalidate( SID_TABLES_COUNT ); + rBindings.Invalidate( SID_SELECT_SCENARIO ); + rBindings.Invalidate( FID_TABLE_SHOW ); + } +} + +void ScViewFunc::ExtendScenario() +{ + ScEditableTester aTester( this ); + if (!aTester.IsEditable()) + { + ErrorMessage(aTester.GetMessageId()); + return; + } + + // Undo: apply attributes + + ScDocument& rDoc = GetViewData().GetDocument(); + ScPatternAttr aPattern( rDoc.GetPool() ); + aPattern.GetItemSet().Put( ScMergeFlagAttr( ScMF::Scenario ) ); + aPattern.GetItemSet().Put( ScProtectionAttr( true ) ); + ApplySelectionPattern(aPattern); +} + +void ScViewFunc::UseScenario( const OUString& rName ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + SCTAB nTab = GetViewData().GetTabNo(); + + DoneBlockMode(); + InitOwnBlockMode( ScRange( GetViewData().GetCurX(), GetViewData().GetCurY(), nTab)); + pDocSh->UseScenario( nTab, rName ); +} + +// Insert table + +bool ScViewFunc::InsertTable( const OUString& rName, SCTAB nTab, bool bRecord ) +{ + // Order Table/Name is inverted for DocFunc + bool bSuccess = GetViewData().GetDocShell()->GetDocFunc(). + InsertTable( nTab, rName, bRecord, false ); + if (bSuccess) + SetTabNo( nTab, true ); + + return bSuccess; +} + +// Insert tables + +void ScViewFunc::InsertTables(std::vector<OUString>& aNames, SCTAB nTab, + SCTAB nCount, bool bRecord ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + if (bRecord && !rDoc.IsUndoEnabled()) + bRecord = false; + + weld::WaitObject aWait(GetViewData().GetDialogParent()); + + if (bRecord) + { + rDoc.BeginDrawUndo(); // InsertTab creates a SdrUndoNewPage + } + + bool bFlag=false; + + if(aNames.empty()) + { + rDoc.CreateValidTabNames(aNames, nCount); + } + if (rDoc.InsertTabs(nTab, aNames)) + { + pDocSh->Broadcast( ScTablesHint( SC_TABS_INSERTED, nTab, nCount ) ); + bFlag = true; + } + + if (!bFlag) + return; + + if (bRecord) + pDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoInsertTables>( pDocSh, nTab, std::move(aNames))); + + // Update views + + SetTabNo( nTab, true ); + pDocSh->PostPaintExtras(); + pDocSh->SetDocumentModified(); + SfxGetpApp()->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); +} + +bool ScViewFunc::AppendTable( const OUString& rName, bool bRecord ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + if (bRecord && !rDoc.IsUndoEnabled()) + bRecord = false; + + weld::WaitObject aWait(GetViewData().GetDialogParent()); + + if (bRecord) + rDoc.BeginDrawUndo(); // InsertTab creates a SdrUndoNewPage + + if (rDoc.InsertTab( SC_TAB_APPEND, rName )) + { + SCTAB nTab = rDoc.GetTableCount()-1; + if (bRecord) + pDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoInsertTab>( pDocSh, nTab, true, rName)); + GetViewData().InsertTab( nTab ); + SetTabNo( nTab, true ); + pDocSh->PostPaintExtras(); + pDocSh->SetDocumentModified(); + SfxGetpApp()->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); + return true; + } + else + { + return false; + } +} + +void ScViewFunc::DeleteTable( SCTAB nTab, bool bRecord ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + + bool bSuccess = pDocSh->GetDocFunc().DeleteTable( nTab, bRecord ); + if (bSuccess) + { + SCTAB nNewTab = nTab; + if ( nNewTab >= rDoc.GetTableCount() ) + --nNewTab; + SetTabNo( nNewTab, true ); + } +} + +//only use this method for undo for now, all sheets must be connected +//this method doesn't support undo for now, merge it when it with the other method later +void ScViewFunc::DeleteTables( const SCTAB nTab, SCTAB nSheets ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + bool bVbaEnabled = rDoc.IsInVBAMode(); + SCTAB nNewTab = nTab; + weld::WaitObject aWait(GetViewData().GetDialogParent()); + + while ( nNewTab > 0 && !rDoc.IsVisible( nNewTab ) ) + --nNewTab; + + if (!rDoc.DeleteTabs(nTab, nSheets)) + return; + + if( bVbaEnabled ) + { + for (SCTAB aTab = 0; aTab < nSheets; ++aTab) + { + OUString sCodeName; + bool bHasCodeName = rDoc.GetCodeName( nTab + aTab, sCodeName ); + if ( bHasCodeName ) + VBA_DeleteModule( *pDocSh, sCodeName ); + } + } + + pDocSh->Broadcast( ScTablesHint( SC_TABS_DELETED, nTab, nSheets ) ); + if ( nNewTab >= rDoc.GetTableCount() ) + nNewTab = rDoc.GetTableCount() - 1; + SetTabNo( nNewTab, true ); + + pDocSh->PostPaintExtras(); + pDocSh->SetDocumentModified(); + + SfxApplication* pSfxApp = SfxGetpApp(); // Navigator + pSfxApp->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); + pSfxApp->Broadcast( SfxHint( SfxHintId::ScDbAreasChanged ) ); + pSfxApp->Broadcast( SfxHint( SfxHintId::ScAreaLinksChanged ) ); +} + +bool ScViewFunc::DeleteTables(const vector<SCTAB> &TheTabs, bool bRecord ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + bool bVbaEnabled = rDoc.IsInVBAMode(); + SCTAB nNewTab = TheTabs.front(); + weld::WaitObject aWait(GetViewData().GetDialogParent()); + if (bRecord && !rDoc.IsUndoEnabled()) + bRecord = false; + if ( bVbaEnabled ) + bRecord = false; + + while ( nNewTab > 0 && !rDoc.IsVisible( nNewTab ) ) + --nNewTab; + + bool bWasLinked = false; + ScDocumentUniquePtr pUndoDoc; + std::unique_ptr<ScRefUndoData> pUndoData; + if (bRecord) + { + pUndoDoc.reset(new ScDocument( SCDOCMODE_UNDO )); + SCTAB nCount = rDoc.GetTableCount(); + + OUString aOldName; + for(size_t i=0; i<TheTabs.size(); ++i) + { + SCTAB nTab = TheTabs[i]; + if (i==0) + pUndoDoc->InitUndo( rDoc, nTab,nTab, true,true ); // incl. column/fow flags + else + pUndoDoc->AddUndoTab( nTab,nTab, true,true ); // incl. column/fow flags + + rDoc.CopyToDocument(0,0,nTab, rDoc.MaxCol(), rDoc.MaxRow(), nTab, InsertDeleteFlags::ALL,false, *pUndoDoc ); + rDoc.GetName( nTab, aOldName ); + pUndoDoc->RenameTab( nTab, aOldName ); + if (rDoc.IsLinked(nTab)) + { + bWasLinked = true; + pUndoDoc->SetLink( nTab, rDoc.GetLinkMode(nTab), rDoc.GetLinkDoc(nTab), + rDoc.GetLinkFlt(nTab), rDoc.GetLinkOpt(nTab), + rDoc.GetLinkTab(nTab), + rDoc.GetLinkRefreshDelay(nTab) ); + } + if ( rDoc.IsScenario(nTab) ) + { + pUndoDoc->SetScenario( nTab, true ); + OUString aComment; + Color aColor; + ScScenarioFlags nScenFlags; + rDoc.GetScenarioData( nTab, aComment, aColor, nScenFlags ); + pUndoDoc->SetScenarioData( nTab, aComment, aColor, nScenFlags ); + bool bActive = rDoc.IsActiveScenario( nTab ); + pUndoDoc->SetActiveScenario( nTab, bActive ); + } + pUndoDoc->SetVisible( nTab, rDoc.IsVisible( nTab ) ); + pUndoDoc->SetTabBgColor( nTab, rDoc.GetTabBgColor(nTab) ); + auto pSheetEvents = rDoc.GetSheetEvents( nTab ); + pUndoDoc->SetSheetEvents( nTab, std::unique_ptr<ScSheetEvents>(pSheetEvents ? new ScSheetEvents(*pSheetEvents) : nullptr) ); + pUndoDoc->SetLayoutRTL( nTab, rDoc.IsLayoutRTL( nTab ) ); + + if ( rDoc.IsTabProtected( nTab ) ) + pUndoDoc->SetTabProtection(nTab, rDoc.GetTabProtection(nTab)); + + // Drawing-Layer is responsible for its Undo !!! + // pUndoDoc->TransferDrawPage(rDoc, nTab,nTab); + } + + pUndoDoc->AddUndoTab( 0, nCount-1 ); // all Tabs for references + + rDoc.BeginDrawUndo(); // DeleteTab creates a SdrUndoDelPage + + pUndoData.reset(new ScRefUndoData( &rDoc )); + } + + bool bDelDone = false; + + for(int i=TheTabs.size()-1; i>=0; --i) + { + OUString sCodeName; + bool bHasCodeName = rDoc.GetCodeName( TheTabs[i], sCodeName ); + if (rDoc.DeleteTab(TheTabs[i])) + { + bDelDone = true; + if( bVbaEnabled && bHasCodeName ) + { + VBA_DeleteModule( *pDocSh, sCodeName ); + } + pDocSh->Broadcast( ScTablesHint( SC_TAB_DELETED, TheTabs[i] ) ); + } + } + if (bRecord) + { + pDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoDeleteTab>( GetViewData().GetDocShell(), TheTabs, + std::move(pUndoDoc), std::move(pUndoData) )); + } + + if (bDelDone) + { + if ( nNewTab >= rDoc.GetTableCount() ) + nNewTab = rDoc.GetTableCount() - 1; + + SetTabNo( nNewTab, true ); + + if (bWasLinked) + { + pDocSh->UpdateLinks(); // update Link-Manager + GetViewData().GetBindings().Invalidate(SID_LINKS); + } + + pDocSh->PostPaintExtras(); + pDocSh->SetDocumentModified(); + + SfxApplication* pSfxApp = SfxGetpApp(); // Navigator + pSfxApp->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); + pSfxApp->Broadcast( SfxHint( SfxHintId::ScAreasChanged ) ); + pSfxApp->Broadcast( SfxHint( SfxHintId::ScDbAreasChanged ) ); + pSfxApp->Broadcast( SfxHint( SfxHintId::ScAreaLinksChanged ) ); + } + return bDelDone; +} + +bool ScViewFunc::RenameTable( const OUString& rName, SCTAB nTab ) +{ + // order Table/Name is inverted for DocFunc + bool bSuccess = GetViewData().GetDocShell()->GetDocFunc(). + RenameTable( nTab, rName, true, false ); + if (bSuccess) + { + // the table name might be part of a formula + GetViewData().GetViewShell()->UpdateInputHandler(); + } + return bSuccess; +} + +bool ScViewFunc::SetTabBgColor( const Color& rColor, SCTAB nTab ) +{ + bool bSuccess = GetViewData().GetDocShell()->GetDocFunc().SetTabBgColor( nTab, rColor, true, false ); + if (bSuccess) + { + GetViewData().GetViewShell()->UpdateInputHandler(); + } + return bSuccess; +} + +bool ScViewFunc::SetTabBgColor( ScUndoTabColorInfo::List& rUndoSetTabBgColorInfoList ) +{ + bool bSuccess = GetViewData().GetDocShell()->GetDocFunc().SetTabBgColor( rUndoSetTabBgColorInfoList, false ); + if (bSuccess) + { + GetViewData().GetViewShell()->UpdateInputHandler(); + } + return bSuccess; +} + +void ScViewFunc::InsertAreaLink( const OUString& rFile, + const OUString& rFilter, const OUString& rOptions, + const OUString& rSource ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + SCCOL nPosX = GetViewData().GetCurX(); + SCROW nPosY = GetViewData().GetCurY(); + SCTAB nTab = GetViewData().GetTabNo(); + ScAddress aPos( nPosX, nPosY, nTab ); + + pDocSh->GetDocFunc().InsertAreaLink( rFile, rFilter, rOptions, rSource, aPos, 0/*nRefresh*/, false, false ); +} + +void ScViewFunc::InsertTableLink( const OUString& rFile, + const OUString& rFilter, const OUString& rOptions, + std::u16string_view rTabName ) +{ + OUString aFilterName = rFilter; + OUString aOpt = rOptions; + ScDocumentLoader aLoader( rFile, aFilterName, aOpt ); + if (aLoader.IsError()) + return; + + ScDocShell* pSrcSh = aLoader.GetDocShell(); + ScDocument& rSrcDoc = pSrcSh->GetDocument(); + SCTAB nTab = MAXTAB+1; + if (rTabName.empty()) // no name given -> first table + nTab = 0; + else + { + OUString aTemp; + SCTAB nCount = rSrcDoc.GetTableCount(); + for (SCTAB i=0; i<nCount; i++) + { + rSrcDoc.GetName( i, aTemp ); + if ( aTemp == rTabName ) + nTab = i; + } + } + + if ( nTab <= MAXTAB ) + ImportTables( pSrcSh, 1, &nTab, true, + GetViewData().GetTabNo() ); +} + +// Copy/link tables from another document + +void ScViewFunc::ImportTables( ScDocShell* pSrcShell, + SCTAB nCount, const SCTAB* pSrcTabs, bool bLink,SCTAB nTab ) +{ + ScDocument& rSrcDoc = pSrcShell->GetDocument(); + + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + bool bUndo(rDoc.IsUndoEnabled()); + + bool bError = false; + bool bRefs = false; + bool bName = false; + + if (rSrcDoc.GetDrawLayer()) + pDocSh->MakeDrawLayer(); + + if (bUndo) + rDoc.BeginDrawUndo(); // drawing layer must do its own undo actions + + SCTAB nInsCount = 0; + SCTAB i; + for( i=0; i<nCount; i++ ) + { // insert sheets first and update all references + OUString aName; + rSrcDoc.GetName( pSrcTabs[i], aName ); + rDoc.CreateValidTabName( aName ); + if ( !rDoc.InsertTab( nTab+i, aName ) ) + { + bError = true; // total error + break; // for + } + ++nInsCount; + } + for (i=0; i<nCount && !bError; i++) + { + SCTAB nSrcTab = pSrcTabs[i]; + SCTAB nDestTab1=nTab+i; + sal_uLong nErrVal = pDocSh->TransferTab( *pSrcShell, nSrcTab, nDestTab1, + false, false ); // no insert + + switch (nErrVal) + { + case 0: // internal error or full of errors + bError = true; + break; + case 2: + bRefs = true; + break; + case 3: + bName = true; + break; + case 4: + bRefs = bName = true; + break; + } + + } + + if (bLink) + { + sfx2::LinkManager* pLinkManager = rDoc.GetLinkManager(); + + SfxMedium* pMed = pSrcShell->GetMedium(); + OUString aFileName = pMed->GetName(); + OUString aFilterName; + if (pMed->GetFilter()) + aFilterName = pMed->GetFilter()->GetFilterName(); + OUString aOptions = ScDocumentLoader::GetOptions(*pMed); + + bool bWasThere = rDoc.HasLink( aFileName, aFilterName, aOptions ); + + sal_uLong nRefresh = 0; + OUString aTabStr; + for (i=0; i<nInsCount; i++) + { + rSrcDoc.GetName( pSrcTabs[i], aTabStr ); + rDoc.SetLink( nTab+i, ScLinkMode::NORMAL, + aFileName, aFilterName, aOptions, aTabStr, nRefresh ); + } + + if (!bWasThere) // Insert link only once per source document + { + ScTableLink* pLink = new ScTableLink( pDocSh, aFileName, aFilterName, aOptions, nRefresh ); + pLink->SetInCreate( true ); + pLinkManager->InsertFileLink( *pLink, sfx2::SvBaseLinkObjectType::ClientFile, aFileName, &aFilterName ); + pLink->Update(); + pLink->SetInCreate( false ); + + SfxBindings& rBindings = GetViewData().GetBindings(); + rBindings.Invalidate( SID_LINKS ); + } + } + + if (bUndo) + { + pDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoImportTab>( pDocSh, nTab, nCount ) ); + } + + for (i=0; i<nInsCount; i++) + GetViewData().InsertTab(nTab); + SetTabNo(nTab,true); + pDocSh->PostPaint( 0,0,0, rDoc.MaxCol(), rDoc.MaxRow(), MAXTAB, + PaintPartFlags::Grid | PaintPartFlags::Top | PaintPartFlags::Left | PaintPartFlags::Extras ); + + SfxApplication* pSfxApp = SfxGetpApp(); + pSfxApp->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); + pSfxApp->Broadcast( SfxHint( SfxHintId::ScAreasChanged ) ); + + pDocSh->PostPaintExtras(); + pDocSh->PostPaintGridAll(); + pDocSh->SetDocumentModified(); + + if (bRefs) + ErrorMessage(STR_ABSREFLOST); + if (bName) + ErrorMessage(STR_NAMECONFLICT); +} + +// Move/Copy table to another document + +void ScViewFunc::MoveTable( + sal_uInt16 nDestDocNo, SCTAB nDestTab, bool bCopy, const OUString* pNewTabName ) +{ + ScDocument& rDoc = GetViewData().GetDocument(); + ScDocShell* pDocShell = GetViewData().GetDocShell(); + ScDocShell* pDestShell = nullptr; + ScTabViewShell* pDestViewSh = nullptr; + bool bUndo (rDoc.IsUndoEnabled()); + bool bRename = pNewTabName && !pNewTabName->isEmpty(); + + bool bNewDoc = (nDestDocNo == SC_DOC_NEW); + if ( bNewDoc ) + { + nDestTab = 0; // firstly insert + + // execute without SfxCallMode::RECORD, because already contained in move command + + SfxStringItem aItem( SID_FILE_NAME, "private:factory/" + STRING_SCAPP ); + SfxStringItem aTarget( SID_TARGETNAME, "_blank" ); + + const SfxPoolItem* pRetItem = GetViewData().GetDispatcher().ExecuteList( + SID_OPENDOC, SfxCallMode::API|SfxCallMode::SYNCHRON, + { &aItem, &aTarget }); + if ( pRetItem ) + { + if ( auto pObjectItem = dynamic_cast<const SfxObjectItem*>(pRetItem) ) + pDestShell = dynamic_cast<ScDocShell*>( pObjectItem->GetShell() ); + else if ( auto pViewFrameItem = dynamic_cast<const SfxViewFrameItem*>( pRetItem) ) + { + SfxViewFrame* pFrm = pViewFrameItem->GetFrame(); + if (pFrm) + pDestShell = dynamic_cast<ScDocShell*>( pFrm->GetObjectShell() ); + } + if (pDestShell) + pDestViewSh = pDestShell->GetBestViewShell(); + } + } + else + pDestShell = ScDocShell::GetShellByNum( nDestDocNo ); + + if (!pDestShell) + { + OSL_FAIL("Destination document not found !!!"); + return; + } + + ScMarkData& rMark = GetViewData().GetMarkData(); + if (bRename && rMark.GetSelectCount() != 1) + { + // Custom sheet name is provided, but more than one sheet is selected. + // We don't support this scenario at the moment. + return; + } + + ScDocument& rDestDoc = pDestShell->GetDocument(); + + if (&rDestDoc != &rDoc) + { + if (bNewDoc) + { + while (rDestDoc.GetTableCount() > 1) + rDestDoc.DeleteTab(0); + rDestDoc.RenameTab( 0, "______42_____" ); + } + + SCTAB nTabCount = rDoc.GetTableCount(); + SCTAB nTabSelCount = rMark.GetSelectCount(); + + vector<SCTAB> TheTabs; + + for(SCTAB i=0; i<nTabCount; ++i) + { + if(rMark.GetTableSelect(i)) + { + OUString aTabName; + rDoc.GetName( i, aTabName); + TheTabs.push_back(i); + for(SCTAB j=i+1;j<nTabCount;j++) + { + if((!rDoc.IsVisible(j)) && rDoc.IsScenario(j)) + { + rDoc.GetName( j, aTabName); + TheTabs.push_back(j); + i=j; + } + else break; + } + } + } + + GetFrameWin()->EnterWait(); + + if (rDoc.GetDrawLayer()) + pDestShell->MakeDrawLayer(); + + if (!bNewDoc && bUndo) + rDestDoc.BeginDrawUndo(); // drawing layer must do its own undo actions + + sal_uLong nErrVal =1; + if(nDestTab==SC_TAB_APPEND) + nDestTab=rDestDoc.GetTableCount(); + SCTAB nDestTab1=nDestTab; + ScClipParam aParam; + for( size_t j=0; j<TheTabs.size(); ++j, ++nDestTab1 ) + { // insert sheets first and update all references + OUString aName; + if (bRename) + aName = *pNewTabName; + else + rDoc.GetName( TheTabs[j], aName ); + + rDestDoc.CreateValidTabName( aName ); + if ( !rDestDoc.InsertTab( nDestTab1, aName ) ) + { + nErrVal = 0; // total error + break; // for + } + ScRange aRange( 0, 0, TheTabs[j], rDoc.MaxCol(), rDoc.MaxRow(), TheTabs[j] ); + aParam.maRanges.push_back(aRange); + } + rDoc.SetClipParam(aParam); + if ( nErrVal > 0 ) + { + nDestTab1 = nDestTab; + for(SCTAB nTab : TheTabs) + { + nErrVal = pDestShell->TransferTab( *pDocShell, nTab, nDestTab1, false, false ); + nDestTab1++; + } + } + if (!bNewDoc && bUndo) + { + OUString sName; + rDestDoc.GetName(nDestTab, sName); + pDestShell->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoImportTab>( pDestShell, nDestTab, + static_cast<SCTAB>(TheTabs.size()))); + + } + else + { + pDestShell->GetUndoManager()->Clear(); + } + + GetFrameWin()->LeaveWait(); + switch (nErrVal) + { + case 0: // internal error or full of errors + { + ErrorMessage(STR_TABINSERT_ERROR); + return; + } + case 2: + ErrorMessage(STR_ABSREFLOST); + break; + case 3: + ErrorMessage(STR_NAMECONFLICT); + break; + case 4: + { + ErrorMessage(STR_ABSREFLOST); + ErrorMessage(STR_NAMECONFLICT); + } + break; + default: + break; + } + + if (!bCopy) + { + if(nTabCount!=nTabSelCount) + DeleteTables(TheTabs); // incl. Paint & Undo + else + ErrorMessage(STR_TABREMOVE_ERROR); + } + + if (bNewDoc) + { + // ChartListenerCollection must be updated before DeleteTab + if ( rDestDoc.IsChartListenerCollectionNeedsUpdate() ) + rDestDoc.UpdateChartListenerCollection(); + + SCTAB nNumTabsInserted = static_cast<SCTAB>(TheTabs.size()); + pDestShell->Broadcast( ScTablesHint( SC_TABS_INSERTED, 0, nNumTabsInserted ) ); + + rDestDoc.DeleteTab( nNumTabsInserted ); // old first table + pDestShell->Broadcast( ScTablesHint( SC_TAB_DELETED, nNumTabsInserted ) ); + + if (pDestViewSh) + { + // Make sure to clear the cached page view after sheet + // deletion, which still points to the sdr page belonging to + // the deleted sheet. + SdrView* pSdrView = pDestViewSh->GetScDrawView(); + if (pSdrView) + pSdrView->ClearPageView(); + + pDestViewSh->TabChanged(); // pages on the drawing layer + } + pDestShell->PostPaint( 0,0,0, rDoc.MaxCol(), rDoc.MaxRow(), MAXTAB, + PaintPartFlags::Grid | PaintPartFlags::Top | PaintPartFlags::Left | + PaintPartFlags::Extras | PaintPartFlags::Size ); + // PaintPartFlags::Size for outline + } + else + { + pDestShell->Broadcast( ScTablesHint( SC_TAB_INSERTED, nDestTab ) ); + pDestShell->PostPaintExtras(); + pDestShell->PostPaintGridAll(); + } + + TheTabs.clear(); + + pDestShell->SetDocumentModified(); + SfxGetpApp()->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); + } + else + { + // Move or copy within the same document. + SCTAB nTabCount = rDoc.GetTableCount(); + + unique_ptr< vector<SCTAB> > pSrcTabs(new vector<SCTAB>); + unique_ptr< vector<SCTAB> > pDestTabs(new vector<SCTAB>); + unique_ptr< vector<OUString> > pTabNames(new vector<OUString>); + unique_ptr< vector<OUString> > pDestNames; + pSrcTabs->reserve(nTabCount); + pDestTabs->reserve(nTabCount); + pTabNames->reserve(nTabCount); + OUString aDestName; + + for(SCTAB i=0;i<nTabCount;i++) + { + if(rMark.GetTableSelect(i)) + { + OUString aTabName; + rDoc.GetName( i, aTabName); + pTabNames->push_back(aTabName); + + for(SCTAB j=i+1;j<nTabCount;j++) + { + if((!rDoc.IsVisible(j)) && rDoc.IsScenario(j)) + { + rDoc.GetName( j, aTabName); + pTabNames->push_back(aTabName); + i=j; + } + else break; + } + } + } + + if (bCopy && bUndo) + rDoc.BeginDrawUndo(); // drawing layer must do its own undo actions + + rDoc.GetName( nDestTab, aDestName); + SCTAB nDestTab1=nDestTab; + SCTAB nMovTab=0; + for (size_t j = 0, n = pTabNames->size(); j < n; ++j) + { + nTabCount = rDoc.GetTableCount(); + const OUString& rStr = (*pTabNames)[j]; + if(!rDoc.GetTable(rStr,nMovTab)) + { + nMovTab=nTabCount; + } + if(!rDoc.GetTable(aDestName,nDestTab1)) + { + nDestTab1=nTabCount; + } + pDocShell->MoveTable( nMovTab, nDestTab1, bCopy, false ); // Undo is here + + // tdf#43175 - Adjust chart references on every copied sheet + if (bCopy) + { + // New position of source table after moving + SCTAB nSrcTab = (nDestTab1 <= nMovTab) ? nMovTab + 1 : nMovTab; + //#i29848# adjust references to data on the copied sheet + ScChartHelper::AdjustRangesOfChartsOnDestinationPage(rDoc, rDestDoc, nSrcTab, + nDestTab1); + } + + if(bCopy && rDoc.IsScenario(nMovTab)) + { + OUString aComment; + Color aColor; + ScScenarioFlags nFlags; + + rDoc.GetScenarioData(nMovTab, aComment,aColor, nFlags); + rDoc.SetScenario(nDestTab1,true); + rDoc.SetScenarioData(nDestTab1,aComment,aColor,nFlags); + bool bActive = rDoc.IsActiveScenario(nMovTab ); + rDoc.SetActiveScenario( nDestTab1, bActive ); + bool bVisible=rDoc.IsVisible(nMovTab); + rDoc.SetVisible(nDestTab1,bVisible ); + } + + pSrcTabs->push_back(nMovTab); + + if(!bCopy) + { + if(!rDoc.GetTable(rStr,nDestTab1)) + { + nDestTab1=nTabCount; + } + } + + pDestTabs->push_back(nDestTab1); + } + + // Rename must be done after all sheets have been moved. + if (bRename) + { + pDestNames.reset(new vector<OUString>); + size_t n = pDestTabs->size(); + pDestNames->reserve(n); + for (size_t j = 0; j < n; ++j) + { + SCTAB nRenameTab = (*pDestTabs)[j]; + OUString aTabName = *pNewTabName; + rDoc.CreateValidTabName( aTabName ); + pDestNames->push_back(aTabName); + rDoc.RenameTab(nRenameTab, aTabName); + } + } + else + // No need to keep this around when we are not renaming. + pTabNames.reset(); + + SCTAB nTab = GetViewData().GetTabNo(); + + if (bUndo) + { + if (bCopy) + { + pDocShell->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoCopyTab>( + pDocShell, std::move(pSrcTabs), std::move(pDestTabs), std::move(pDestNames))); + } + else + { + pDocShell->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoMoveTab>( + pDocShell, std::move(pSrcTabs), std::move(pDestTabs), std::move(pTabNames), std::move(pDestNames))); + } + } + + SCTAB nNewTab = nDestTab; + if (nNewTab == SC_TAB_APPEND) + nNewTab = rDoc.GetTableCount()-1; + else if (!bCopy && nTab<nDestTab) + nNewTab--; + + SetTabNo( nNewTab, true ); + } +} + +void ScViewFunc::ShowTable( const std::vector<OUString>& rNames ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + bool bUndo(rDoc.IsUndoEnabled()); + + std::vector<SCTAB> undoTabs; + SCTAB nPos = 0; + + bool bFound(false); + + for (const OUString& aName : rNames) + { + if (rDoc.GetTable(aName, nPos)) + { + rDoc.SetVisible( nPos, true ); + SetTabNo( nPos, true ); + SfxGetpApp()->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); + if (!bFound) + bFound = true; + if (bUndo) + undoTabs.push_back(nPos); + } + } + if (bFound) + { + if (bUndo) + { + pDocSh->GetUndoManager()->AddUndoAction( std::make_unique<ScUndoShowHideTab>( pDocSh, std::move(undoTabs), true ) ); + } + pDocSh->PostPaint(0,0,0,rDoc.MaxCol(),rDoc.MaxRow(),MAXTAB, PaintPartFlags::Extras); + pDocSh->SetDocumentModified(); + } +} + +void ScViewFunc::HideTable( const ScMarkData& rMark, SCTAB nTabToSelect ) +{ + ScDocShell* pDocSh = GetViewData().GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + bool bUndo(rDoc.IsUndoEnabled()); + SCTAB nVisible = 0; + SCTAB nTabCount = rDoc.GetTableCount(); + + SCTAB nTabSelCount = rMark.GetSelectCount(); + + // check to make sure we won't hide all sheets. we need at least one visible at all times. + for ( SCTAB i=0; i < nTabCount && nVisible <= nTabSelCount ; i++ ) + if (rDoc.IsVisible(i)) + ++nVisible; + + if (nVisible <= nTabSelCount) + return; + + std::vector<SCTAB> undoTabs; + + // need to take a copy of selectedtabs since it is modified in the loop + const ScMarkData::MarkedTabsType selectedTabs = rMark.GetSelectedTabs(); + for (const SCTAB& nTab : selectedTabs) + { + if (rDoc.IsVisible( nTab )) + { + rDoc.SetVisible( nTab, false ); + // Update views + pDocSh->Broadcast( ScTablesHint( SC_TAB_HIDDEN, nTab ) ); + SetTabNo( nTab, true ); + // Store for undo + if (bUndo) + undoTabs.push_back(nTab); + } + } + + if (nTabToSelect != -1) + SetTabNo(nTabToSelect); + + if (bUndo) + { + pDocSh->GetUndoManager()->AddUndoAction( std::make_unique<ScUndoShowHideTab>( pDocSh, std::move(undoTabs), false ) ); + } + + // Update views + SfxGetpApp()->Broadcast( SfxHint( SfxHintId::ScTablesChanged ) ); + pDocSh->PostPaint(0,0,0,rDoc.MaxCol(),rDoc.MaxRow(),MAXTAB, PaintPartFlags::Extras); + pDocSh->SetDocumentModified(); +} + +void ScViewFunc::InsertSpecialChar( const OUString& rStr, const vcl::Font& rFont ) +{ + ScEditableTester aTester( this ); + if (!aTester.IsEditable()) + { + ErrorMessage(aTester.GetMessageId()); + return; + } + + const sal_Unicode* pChar = rStr.getStr(); + ScTabViewShell* pViewShell = GetViewData().GetViewShell(); + SvxFontItem aFontItem( rFont.GetFamilyType(), + rFont.GetFamilyName(), + rFont.GetStyleName(), + rFont.GetPitch(), + rFont.GetCharSet(), + ATTR_FONT ); + + // if string contains WEAK characters, set all fonts + SvtScriptType nScript; + ScDocument& rDoc = GetViewData().GetDocument(); + if ( rDoc.HasStringWeakCharacters( rStr ) ) + nScript = SvtScriptType::LATIN | SvtScriptType::ASIAN | SvtScriptType::COMPLEX; + else + nScript = rDoc.GetStringScriptType( rStr ); + + SvxScriptSetItem aSetItem( SID_ATTR_CHAR_FONT, pViewShell->GetPool() ); + aSetItem.PutItemForScriptType( nScript, aFontItem ); + ApplyUserItemSet( aSetItem.GetItemSet() ); + + while ( *pChar ) + pViewShell->TabKeyInput( KeyEvent( *(pChar++), vcl::KeyCode() ) ); +} + +void ScViewFunc::UpdateLineAttrs( SvxBorderLine& rLine, + const SvxBorderLine* pDestLine, + const SvxBorderLine* pSrcLine, + bool bColor ) +{ + if ( !(pSrcLine && pDestLine) ) + return; + + if ( bColor ) + { + rLine.SetColor ( pSrcLine->GetColor() ); + rLine.SetBorderLineStyle(pDestLine->GetBorderLineStyle()); + rLine.SetWidth ( pDestLine->GetWidth() ); + } + else + { + rLine.SetColor ( pDestLine->GetColor() ); + rLine.SetBorderLineStyle(pSrcLine->GetBorderLineStyle()); + rLine.SetWidth ( pSrcLine->GetWidth() ); + } +} + +#define SET_LINE_ATTRIBUTES(LINE,BOXLINE) \ + pBoxLine = aBoxItem.Get##LINE(); \ + if ( pBoxLine ) \ + { \ + if ( pLine ) \ + { \ + UpdateLineAttrs( aLine, pBoxLine, pLine, bColorOnly ); \ + aBoxItem.SetLine( &aLine, BOXLINE ); \ + } \ + else \ + aBoxItem.SetLine( nullptr, BOXLINE ); \ + } + +void ScViewFunc::SetSelectionFrameLines( const SvxBorderLine* pLine, + bool bColorOnly ) +{ + // Not editable only due to a matrix? Attribute is ok anyhow. + bool bOnlyNotBecauseOfMatrix; + if ( !SelectionEditable( &bOnlyNotBecauseOfMatrix ) && !bOnlyNotBecauseOfMatrix ) + { + ErrorMessage(STR_PROTECTIONERR); + return; + } + + ScDocument& rDoc = GetViewData().GetDocument(); + ScMarkData aFuncMark( GetViewData().GetMarkData() ); // local copy for UnmarkFiltered + ScViewUtil::UnmarkFiltered( aFuncMark, rDoc ); + ScDocShell* pDocSh = GetViewData().GetDocShell(); + const ScPatternAttr* pSelAttrs = GetSelectionPattern(); + const SfxItemSet& rSelItemSet = pSelAttrs->GetItemSet(); + + const SfxPoolItem* pBorderAttr = nullptr; + SfxItemState eItemState = rSelItemSet.GetItemState( ATTR_BORDER, true, &pBorderAttr ); + + const SfxPoolItem* pTLBRItem = nullptr; + SfxItemState eTLBRState = rSelItemSet.GetItemState( ATTR_BORDER_TLBR, true, &pTLBRItem ); + + const SfxPoolItem* pBLTRItem = nullptr; + SfxItemState eBLTRState = rSelItemSet.GetItemState( ATTR_BORDER_BLTR, true, &pBLTRItem ); + + // any of the lines visible? + if( !((eItemState != SfxItemState::DEFAULT) || (eTLBRState != SfxItemState::DEFAULT) || (eBLTRState != SfxItemState::DEFAULT)) ) + return; + + // none of the lines don't care? + if( (eItemState != SfxItemState::DONTCARE) && (eTLBRState != SfxItemState::DONTCARE) && (eBLTRState != SfxItemState::DONTCARE) ) + { + SfxItemSetFixed<ATTR_PATTERN_START, ATTR_PATTERN_END> aOldSet( *rDoc.GetPool() ); + SfxItemSetFixed<ATTR_PATTERN_START, ATTR_PATTERN_END> aNewSet( *rDoc.GetPool() ); + + SvxBorderLine aLine; + + if( pBorderAttr ) + { + const SvxBorderLine* pBoxLine = nullptr; + SvxBoxItem aBoxItem( *static_cast<const SvxBoxItem*>(pBorderAttr) ); + SvxBoxInfoItem aBoxInfoItem( ATTR_BORDER_INNER ); + + // here pBoxLine is used + SET_LINE_ATTRIBUTES(Top,SvxBoxItemLine::TOP) + SET_LINE_ATTRIBUTES(Bottom,SvxBoxItemLine::BOTTOM) + SET_LINE_ATTRIBUTES(Left,SvxBoxItemLine::LEFT) + SET_LINE_ATTRIBUTES(Right,SvxBoxItemLine::RIGHT) + + aBoxInfoItem.SetLine( aBoxItem.GetTop(), SvxBoxInfoItemLine::HORI ); + aBoxInfoItem.SetLine( aBoxItem.GetLeft(), SvxBoxInfoItemLine::VERT ); + aBoxInfoItem.ResetFlags(); // set Lines to Valid + + aOldSet.Put( *pBorderAttr ); + aNewSet.Put( aBoxItem ); + aNewSet.Put( aBoxInfoItem ); + } + + if( pTLBRItem && static_cast<const SvxLineItem*>(pTLBRItem)->GetLine() ) + { + SvxLineItem aTLBRItem( *static_cast<const SvxLineItem*>(pTLBRItem) ); + UpdateLineAttrs( aLine, aTLBRItem.GetLine(), pLine, bColorOnly ); + aTLBRItem.SetLine( &aLine ); + aOldSet.Put( *pTLBRItem ); + aNewSet.Put( aTLBRItem ); + } + + if( pBLTRItem && static_cast<const SvxLineItem*>(pBLTRItem)->GetLine() ) + { + SvxLineItem aBLTRItem( *static_cast<const SvxLineItem*>(pBLTRItem) ); + UpdateLineAttrs( aLine, aBLTRItem.GetLine(), pLine, bColorOnly ); + aBLTRItem.SetLine( &aLine ); + aOldSet.Put( *pBLTRItem ); + aNewSet.Put( aBLTRItem ); + } + + ApplyAttributes( &aNewSet, &aOldSet ); + } + else // if ( eItemState == SfxItemState::DONTCARE ) + { + aFuncMark.MarkToMulti(); + rDoc.ApplySelectionLineStyle( aFuncMark, pLine, bColorOnly ); + } + + const ScRange& aMarkRange = aFuncMark.GetMultiMarkArea(); + SCCOL nStartCol = aMarkRange.aStart.Col(); + SCROW nStartRow = aMarkRange.aStart.Row(); + SCTAB nStartTab = aMarkRange.aStart.Tab(); + SCCOL nEndCol = aMarkRange.aEnd.Col(); + SCROW nEndRow = aMarkRange.aEnd.Row(); + SCTAB nEndTab = aMarkRange.aEnd.Tab(); + pDocSh->PostPaint( nStartCol, nStartRow, nStartTab, + nEndCol, nEndRow, nEndTab, + PaintPartFlags::Grid, SC_PF_LINES | SC_PF_TESTMERGE ); + + pDocSh->UpdateOle(GetViewData()); + pDocSh->SetDocumentModified(); +} + +#undef SET_LINE_ATTRIBUTES + +void ScViewFunc::SetValidation( const ScValidationData& rNew ) +{ + ScDocument& rDoc = GetViewData().GetDocument(); + sal_uLong nIndex = rDoc.AddValidationEntry(rNew); // for it there is no Undo + SfxUInt32Item aItem( ATTR_VALIDDATA, nIndex ); + + ApplyAttr( aItem ); // with Paint and Undo... +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |