1 files changed, 189 insertions, 0 deletions
diff --git a/sfx2/source/view/printer.cxx b/sfx2/source/view/printer.cxx
new file mode 100644
index 000000000..7b7745349
--- /dev/null
+++ b/sfx2/source/view/printer.cxx
@@ -0,0 +1,189 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <tools/debug.hxx>
+
+#include <utility>
+
+#include <sfx2/printer.hxx>
+#include <sfx2/viewsh.hxx>
+#include <sfx2/tabdlg.hxx>
+#include "prnmon.hxx"
+
+// class SfxPrinter ------------------------------------------------------
+
+VclPtr<SfxPrinter> SfxPrinter::Create( SvStream& rStream, std::unique_ptr<SfxItemSet>&& pOptions )
+
+/*  [Description]
+
+    Creates a <SfxPrinter> from the stream. Loading is really only a jobsetup.
+    If such a printer is not available on the system, then the original is
+    marked as the original Job-setup and a comparable printer is selected from
+    existing ones.
+
+    The 'pOptions' are taken over in the generated SfxPrinter, the return
+    value belongs to the caller.
+*/
+
+{
+    // Load JobSetup
+    JobSetup aFileJobSetup;
+    ReadJobSetup( rStream, aFileJobSetup );
+
+    // Get printers
+    VclPtr<SfxPrinter> pPrinter = VclPtr<SfxPrinter>::Create( std::move(pOptions), aFileJobSetup );
+    return pPrinter;
+}
+
+
+void SfxPrinter::Store( SvStream& rStream ) const
+
+/*  [Description]
+
+    Saves the used JobSetup of <SfxPrinter>s.
+*/
+
+{
+    WriteJobSetup( rStream, GetJobSetup() );
+}
+
+
+SfxPrinter::SfxPrinter( std::unique_ptr<SfxItemSet>&& pTheOptions ) :
+
+/*  [Description]
+
+    This constructor creates a default printer.
+*/
+    pOptions( std::move(pTheOptions) ),
+    bKnown( true )
+{
+    assert(pOptions);
+}
+
+
+SfxPrinter::SfxPrinter( std::unique_ptr<SfxItemSet>&& pTheOptions,
+                        const JobSetup& rTheOrigJobSetup ) :
+    Printer( rTheOrigJobSetup.GetPrinterName() ),
+    pOptions( std::move(pTheOptions) )
+{
+    assert(pOptions);
+    bKnown = GetName() == rTheOrigJobSetup.GetPrinterName();
+
+    if ( bKnown )
+        SetJobSetup( rTheOrigJobSetup );
+}
+
+
+SfxPrinter::SfxPrinter( std::unique_ptr<SfxItemSet>&& pTheOptions,
+                        const OUString& rPrinterName ) :
+    Printer( rPrinterName ),
+    pOptions( std::move(pTheOptions) ),
+    bKnown( GetName() == rPrinterName )
+{
+    assert(pOptions);
+}
+
+
+SfxPrinter::SfxPrinter( const SfxPrinter& rPrinter ) :
+    VclReferenceBase(),
+    Printer( rPrinter.GetName() ),
+    pOptions( rPrinter.GetOptions().Clone() ),
+    bKnown( rPrinter.IsKnown() )
+{
+    assert(pOptions);
+    SetJobSetup( rPrinter.GetJobSetup() );
+    SetPrinterProps( &rPrinter );
+    SetMapMode( rPrinter.GetMapMode() );
+}
+
+
+VclPtr<SfxPrinter> SfxPrinter::Clone() const
+{
+    if ( IsDefPrinter() )
+    {
+        VclPtr<SfxPrinter> pNewPrinter = VclPtr<SfxPrinter>::Create( GetOptions().Clone() );
+        pNewPrinter->SetJobSetup( GetJobSetup() );
+        pNewPrinter->SetPrinterProps( this );
+        pNewPrinter->SetMapMode( GetMapMode() );
+        return pNewPrinter;
+    }
+    else
+        return VclPtr<SfxPrinter>::Create( *this );
+}
+
+
+SfxPrinter::~SfxPrinter()
+{
+    disposeOnce();
+}
+
+void SfxPrinter::dispose()
+{
+    pOptions.reset();
+    Printer::dispose();
+}
+
+
+void SfxPrinter::SetOptions( const SfxItemSet &rNewOptions )
+{
+    pOptions->Set(rNewOptions);
+}
+
+
+SfxPrintOptionsDialog::SfxPrintOptionsDialog(weld::Window *pParent,
+                                             SfxViewShell *pViewShell,
+                                             const SfxItemSet *pSet)
+    : GenericDialogController(pParent, "sfx/ui/printeroptionsdialog.ui", "PrinterOptionsDialog")
+    , pOptions(pSet->Clone())
+    , m_xHelpBtn(m_xBuilder->weld_widget("help"))
+    , m_xContainer(m_xDialog->weld_content_area())
+    , m_xPage(pViewShell->CreatePrintOptionsPage(m_xContainer.get(), this, *pOptions)) // Insert TabPage
+{
+    DBG_ASSERT( m_xPage, "CreatePrintOptions != SFX_VIEW_HAS_PRINTOPTIONS" );
+    if (m_xPage)
+    {
+        m_xPage->Reset( pOptions.get() );
+        m_xDialog->set_help_id(m_xPage->GetHelpId());
+    }
+}
+
+SfxPrintOptionsDialog::~SfxPrintOptionsDialog()
+{
+}
+
+short SfxPrintOptionsDialog::run()
+{
+    if (!m_xPage)
+        return RET_CANCEL;
+
+    short nRet = GenericDialogController::run();
+
+    if (nRet == RET_OK)
+        m_xPage->FillItemSet( pOptions.get() );
+    else
+        m_xPage->Reset( pOptions.get() );
+    return nRet;
+}
+
+void SfxPrintOptionsDialog::DisableHelp()
+{
+    m_xHelpBtn->set_sensitive(false);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */