1 files changed, 968 insertions, 0 deletions

diff --git a/svx/source/tbxctrls/extrusioncontrols.cxx b/svx/source/tbxctrls/extrusioncontrols.cxx
new file mode 100644
index 000000000..9affab6d7
--- /dev/null
+++ b/svx/source/tbxctrls/extrusioncontrols.cxx
@@ -0,0 +1,968 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <sal/config.h>
+
+#include <comphelper/propertyvalue.hxx>
+#include <svtools/toolbarmenu.hxx>
+#include <vcl/toolbox.hxx>
+
+#include <svx/strings.hrc>
+#include <svx/svdtrans.hxx>
+#include <svx/dialmgr.hxx>
+
+#include <helpids.h>
+#include "extrusioncontrols.hxx"
+#include <extrusiondepthdialog.hxx>
+
+#include <bitmaps.hlst>
+
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::lang;
+using namespace ::com::sun::star::beans;
+using namespace ::com::sun::star::util;
+using namespace ::com::sun::star::graphic;
+
+namespace svx
+{
+
+const sal_Int32 gSkewList[] = { 135, 90, 45, 180, 0, -360, -135, -90, -45 };
+constexpr OUStringLiteral g_sExtrusionDirection = u".uno:ExtrusionDirection";
+constexpr OUStringLiteral g_sExtrusionProjection = u".uno:ExtrusionProjection";
+constexpr OUStringLiteral EMPTY = u"";
+
+constexpr rtl::OUStringConstExpr aLightOffBmps[] =
+{
+    RID_SVXBMP_LIGHT_OFF_FROM_TOP_LEFT,
+    RID_SVXBMP_LIGHT_OFF_FROM_TOP,
+    RID_SVXBMP_LIGHT_OFF_FROM_TOP_RIGHT,
+    RID_SVXBMP_LIGHT_OFF_FROM_LEFT,
+    EMPTY,
+    RID_SVXBMP_LIGHT_OFF_FROM_RIGHT,
+    RID_SVXBMP_LIGHT_OFF_FROM_BOTTOM_LEFT,
+    RID_SVXBMP_LIGHT_OFF_FROM_BOTTOM,
+    RID_SVXBMP_LIGHT_OFF_FROM_BOTTOM_RIGHT
+};
+
+constexpr rtl::OUStringConstExpr aLightOnBmps[] =
+{
+    RID_SVXBMP_LIGHT_ON_FROM_TOP_LEFT,
+    RID_SVXBMP_LIGHT_ON_FROM_TOP,
+    RID_SVXBMP_LIGHT_ON_FROM_TOP_RIGHT,
+    RID_SVXBMP_LIGHT_ON_FROM_LEFT,
+    EMPTY,
+    RID_SVXBMP_LIGHT_ON_FROM_RIGHT,
+    RID_SVXBMP_LIGHT_ON_FROM_BOTTOM_LEFT,
+    RID_SVXBMP_LIGHT_ON_FROM_BOTTOM,
+    RID_SVXBMP_LIGHT_ON_FROM_BOTTOM_RIGHT
+};
+
+constexpr rtl::OUStringConstExpr aLightPreviewBmps[] =
+{
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_TOP_LEFT,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_TOP,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_TOP_RIGHT,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_LEFT,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_FRONT,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_RIGHT,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_BOTTOM_LEFT,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_BOTTOM,
+    RID_SVXBMP_LIGHT_PREVIEW_FROM_BOTTOM_RIGHT
+};
+
+constexpr rtl::OUStringConstExpr aDirectionBmps[] =
+{
+    RID_SVXBMP_DIRECTION_DIRECTION_NW,
+    RID_SVXBMP_DIRECTION_DIRECTION_N,
+    RID_SVXBMP_DIRECTION_DIRECTION_NE,
+    RID_SVXBMP_DIRECTION_DIRECTION_W,
+    RID_SVXBMP_DIRECTION_DIRECTION_NONE,
+    RID_SVXBMP_DIRECTION_DIRECTION_E,
+    RID_SVXBMP_DIRECTION_DIRECTION_SW,
+    RID_SVXBMP_DIRECTION_DIRECTION_S,
+    RID_SVXBMP_DIRECTION_DIRECTION_SE
+};
+
+static TranslateId aDirectionStrs[] =
+{
+    RID_SVXSTR_DIRECTION_NW,
+    RID_SVXSTR_DIRECTION_N,
+    RID_SVXSTR_DIRECTION_NE,
+    RID_SVXSTR_DIRECTION_W,
+    RID_SVXSTR_DIRECTION_NONE,
+    RID_SVXSTR_DIRECTION_E,
+    RID_SVXSTR_DIRECTION_SW,
+    RID_SVXSTR_DIRECTION_S,
+    RID_SVXSTR_DIRECTION_SE
+};
+
+ExtrusionDirectionWindow::ExtrusionDirectionWindow(
+    svt::PopupWindowController* pControl,
+    weld::Widget* pParent)
+    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/directionwindow.ui", "DirectionWindow")
+    , mxControl(pControl)
+    , mxDirectionSet(new ValueSet(nullptr))
+    , mxDirectionSetWin(new weld::CustomWeld(*m_xBuilder, "valueset", *mxDirectionSet))
+    , mxPerspective(m_xBuilder->weld_radio_button("perspective"))
+    , mxParallel(m_xBuilder->weld_radio_button("parallel"))
+{
+    mxDirectionSet->SetStyle(WB_TABSTOP | WB_MENUSTYLEVALUESET | WB_FLATVALUESET | WB_NOBORDER | WB_NO_DIRECTSELECT);
+
+    for (sal_uInt16 i = DIRECTION_NW; i <= DIRECTION_SE; ++i)
+    {
+        maImgDirection[i] = Image(StockImage::Yes, OUString(aDirectionBmps[i]));
+    }
+
+    mxDirectionSet->SetSelectHdl( LINK( this, ExtrusionDirectionWindow, SelectValueSetHdl ) );
+    mxDirectionSet->SetColCount( 3 );
+    mxDirectionSet->EnableFullItemMode( false );
+
+    for (sal_uInt16 i = DIRECTION_NW; i <= DIRECTION_SE; ++i)
+    {
+        mxDirectionSet->InsertItem(i + 1, maImgDirection[i], SvxResId(aDirectionStrs[i]));
+    }
+
+    Size aSize(72, 72);
+    mxDirectionSet->GetDrawingArea()->set_size_request(aSize.Width(), aSize.Height());
+    mxDirectionSet->SetOutputSizePixel(aSize);
+
+    mxPerspective->connect_toggled(LINK(this, ExtrusionDirectionWindow, SelectToolbarMenuHdl));
+
+    AddStatusListener( g_sExtrusionDirection );
+    AddStatusListener( g_sExtrusionProjection );
+}
+
+void ExtrusionDirectionWindow::GrabFocus()
+{
+    mxDirectionSet->GrabFocus();
+}
+
+ExtrusionDirectionWindow::~ExtrusionDirectionWindow()
+{
+}
+
+void ExtrusionDirectionWindow::implSetDirection( sal_Int32 nSkew, bool bEnabled )
+{
+    sal_uInt16 nItemId;
+    for( nItemId = DIRECTION_NW; nItemId <= DIRECTION_SE; nItemId++ )
+    {
+        if( gSkewList[nItemId] == nSkew )
+            break;
+    }
+
+    if( nItemId <= DIRECTION_SE )
+    {
+        mxDirectionSet->SelectItem( nItemId+1 );
+    }
+    else
+    {
+        mxDirectionSet->SetNoSelection();
+    }
+
+    if (bEnabled)
+        mxDirectionSet->Enable();
+    else
+        mxDirectionSet->Disable();
+}
+
+void ExtrusionDirectionWindow::implSetProjection( sal_Int32 nProjection, bool bEnabled )
+{
+    mxPerspective->set_active(nProjection == 0 && bEnabled);
+    mxParallel->set_active(nProjection == 1 && bEnabled);
+    mxPerspective->set_sensitive(bEnabled);
+    mxParallel->set_sensitive(bEnabled);
+}
+
+void ExtrusionDirectionWindow::statusChanged(
+    const css::frame::FeatureStateEvent& Event
+)
+{
+    if( Event.FeatureURL.Main == g_sExtrusionDirection )
+    {
+        if( !Event.IsEnabled )
+        {
+            implSetDirection( -1, false );
+        }
+        else
+        {
+            sal_Int32 nValue = 0;
+            if( Event.State >>= nValue )
+                implSetDirection( nValue, true );
+        }
+    }
+    else if( Event.FeatureURL.Main == g_sExtrusionProjection )
+    {
+        if( !Event.IsEnabled )
+        {
+            implSetProjection( -1, false );
+        }
+        else
+        {
+            sal_Int32 nValue = 0;
+            if( Event.State >>= nValue )
+                implSetProjection( nValue, true );
+        }
+    }
+}
+
+IMPL_LINK_NOARG(ExtrusionDirectionWindow, SelectValueSetHdl, ValueSet*, void)
+{
+    Sequence< PropertyValue > aArgs{ comphelper::makePropertyValue(
+        OUString(g_sExtrusionDirection).copy(5),
+        gSkewList[mxDirectionSet->GetSelectedItemId()-1]) };
+
+    mxControl->dispatchCommand( g_sExtrusionDirection, aArgs );
+
+    mxControl->EndPopupMode();
+}
+
+IMPL_LINK_NOARG(ExtrusionDirectionWindow, SelectToolbarMenuHdl, weld::Toggleable&, void)
+{
+    int nProjection = mxPerspective->get_active() ? 0 : 1;
+
+    Sequence< PropertyValue > aArgs{ comphelper::makePropertyValue(
+        OUString(g_sExtrusionProjection).copy(5), static_cast<sal_Int32>(nProjection)) };
+
+    mxControl->dispatchCommand( g_sExtrusionProjection, aArgs );
+    implSetProjection( nProjection, true );
+
+    mxControl->EndPopupMode();
+}
+
+ExtrusionDirectionControl::ExtrusionDirectionControl(
+    const Reference< XComponentContext >& rxContext
+)   : svt::PopupWindowController(
+        rxContext,
+        Reference< css::frame::XFrame >(),
+        ".uno:ExtrusionDirectionFloater"
+    )
+{
+}
+
+std::unique_ptr<WeldToolbarPopup> ExtrusionDirectionControl::weldPopupWindow()
+{
+    return std::make_unique<ExtrusionDirectionWindow>(this, m_pToolbar);
+}
+
+VclPtr<vcl::Window> ExtrusionDirectionControl::createVclPopupWindow( vcl::Window* pParent )
+{
+    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
+        std::make_unique<ExtrusionDirectionWindow>(this, pParent->GetFrameWeld()));
+
+    mxInterimPopover->Show();
+
+    return mxInterimPopover;
+}
+
+// XInitialization
+void SAL_CALL ExtrusionDirectionControl::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
+{
+    svt::PopupWindowController::initialize( aArguments );
+
+    ToolBox* pToolBox = nullptr;
+    ToolBoxItemId nId;
+    if ( getToolboxId( nId, &pToolBox ) )
+        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
+}
+
+// XServiceInfo
+
+
+OUString ExtrusionDirectionControl::getImplementationName()
+{
+    return "com.sun.star.comp.svx.ExtrusionDirectionController";
+}
+
+
+Sequence< OUString > ExtrusionDirectionControl::getSupportedServiceNames()
+{
+    return { "com.sun.star.frame.ToolbarController" };
+}
+
+
+extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
+com_sun_star_comp_svx_ExtrusionDirectionControl_get_implementation(
+    css::uno::XComponentContext* xContext,
+    css::uno::Sequence<css::uno::Any> const &)
+{
+    return cppu::acquire(new ExtrusionDirectionControl(xContext));
+}
+
+
+ExtrusionDepthDialog::ExtrusionDepthDialog(weld::Window* pParent, double fDepth, FieldUnit eDefaultUnit)
+    : GenericDialogController(pParent, "svx/ui/extrustiondepthdialog.ui", "ExtrustionDepthDialog")
+    , m_xMtrDepth(m_xBuilder->weld_metric_spin_button("depth", eDefaultUnit))
+{
+    m_xMtrDepth->set_value(static_cast<int>(fDepth) * 100, FieldUnit::MM_100TH);
+}
+
+ExtrusionDepthDialog::~ExtrusionDepthDialog()
+{
+}
+
+double ExtrusionDepthDialog::getDepth() const
+{
+    return static_cast<double>(m_xMtrDepth->get_value(FieldUnit::MM_100TH)) / 100.0;
+}
+
+double const aDepthListInch[] = { 0, 1270,2540,5080,10160 };
+double const aDepthListMM[] = { 0, 1000, 2500, 5000, 10000 };
+
+constexpr OUStringLiteral gsExtrusionDepth( u".uno:ExtrusionDepth" );
+constexpr OUStringLiteral gsMetricUnit(     u".uno:MetricUnit"     );
+
+ExtrusionDepthWindow::ExtrusionDepthWindow(svt::PopupWindowController* pControl, weld::Widget* pParent)
+    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/depthwindow.ui", "DepthWindow")
+    , mxControl(pControl)
+    , mxDepth0(m_xBuilder->weld_radio_button("depth0"))
+    , mxDepth1(m_xBuilder->weld_radio_button("depth1"))
+    , mxDepth2(m_xBuilder->weld_radio_button("depth2"))
+    , mxDepth3(m_xBuilder->weld_radio_button("depth3"))
+    , mxDepth4(m_xBuilder->weld_radio_button("depth4"))
+    , mxInfinity(m_xBuilder->weld_radio_button("infinity"))
+    , mxCustom(m_xBuilder->weld_radio_button("custom"))
+    , meUnit(FieldUnit::NONE)
+    , mfDepth( -1.0 )
+    , mbSettingValue(false)
+    , mbCommandDispatched(false)
+{
+    mxDepth0->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
+    mxDepth1->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
+    mxDepth2->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
+    mxDepth3->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
+    mxDepth4->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
+    mxInfinity->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
+    mxCustom->connect_toggled(LINK(this, ExtrusionDepthWindow, SelectHdl));
+    mxCustom->connect_mouse_release(LINK(this, ExtrusionDepthWindow, MouseReleaseHdl));
+
+    AddStatusListener( gsExtrusionDepth );
+    AddStatusListener( gsMetricUnit );
+}
+
+void ExtrusionDepthWindow::GrabFocus()
+{
+    mxDepth0->grab_focus();
+}
+
+void ExtrusionDepthWindow::implSetDepth( double fDepth )
+{
+    mfDepth = fDepth;
+
+    bool bSettingValue = mbSettingValue;
+    mbSettingValue = true;
+
+    mxCustom->set_active(true);
+    bool bIsMetric = IsMetric(meUnit);
+    mxDepth0->set_active(fDepth == (bIsMetric ? aDepthListMM[0] : aDepthListInch[0]));
+    mxDepth1->set_active(fDepth == (bIsMetric ? aDepthListMM[1] : aDepthListInch[1]));
+    mxDepth2->set_active(fDepth == (bIsMetric ? aDepthListMM[2] : aDepthListInch[2]));
+    mxDepth3->set_active(fDepth == (bIsMetric ? aDepthListMM[3] : aDepthListInch[3]));
+    mxDepth4->set_active(fDepth == (bIsMetric ? aDepthListMM[4] : aDepthListInch[4]));
+    mxInfinity->set_active(fDepth >= 338666);
+
+    mbSettingValue = bSettingValue;
+}
+
+void ExtrusionDepthWindow::implFillStrings( FieldUnit eUnit )
+{
+    meUnit = eUnit;
+
+    const TranslateId aDepths[] =
+    {
+        RID_SVXSTR_DEPTH_0,
+        RID_SVXSTR_DEPTH_1,
+        RID_SVXSTR_DEPTH_2,
+        RID_SVXSTR_DEPTH_3,
+        RID_SVXSTR_DEPTH_4
+    };
+
+    const TranslateId aDepthsInch[] =
+    {
+        RID_SVXSTR_DEPTH_0_INCH,
+        RID_SVXSTR_DEPTH_1_INCH,
+        RID_SVXSTR_DEPTH_2_INCH,
+        RID_SVXSTR_DEPTH_3_INCH,
+        RID_SVXSTR_DEPTH_4_INCH
+    };
+
+    static_assert(SAL_N_ELEMENTS(aDepths) == SAL_N_ELEMENTS(aDepthsInch));
+
+    const TranslateId* pResource = IsMetric(eUnit) ? aDepths : aDepthsInch;
+
+    mxDepth0->set_label(SvxResId(pResource[0]));
+    mxDepth1->set_label(SvxResId(pResource[1]));
+    mxDepth2->set_label(SvxResId(pResource[2]));
+    mxDepth3->set_label(SvxResId(pResource[3]));
+    mxDepth4->set_label(SvxResId(pResource[4]));
+}
+
+void ExtrusionDepthWindow::statusChanged(
+    const css::frame::FeatureStateEvent& Event
+)
+{
+    if( Event.FeatureURL.Main == gsExtrusionDepth )
+    {
+        if( !Event.IsEnabled )
+        {
+            implSetDepth( 0 );
+        }
+        else
+        {
+            double fValue = 0.0;
+            if( Event.State >>= fValue )
+                implSetDepth( fValue );
+        }
+    }
+    else if( Event.FeatureURL.Main == gsMetricUnit )
+    {
+        if( Event.IsEnabled )
+        {
+            sal_Int32 nValue = 0;
+            if( Event.State >>= nValue )
+            {
+                implFillStrings( static_cast<FieldUnit>(nValue) );
+                if( mfDepth >= 0.0 )
+                    implSetDepth( mfDepth );
+            }
+        }
+    }
+}
+
+void ExtrusionDepthWindow::DispatchDepthDialog()
+{
+    Sequence< PropertyValue > aArgs{
+        comphelper::makePropertyValue("Depth", mfDepth),
+        comphelper::makePropertyValue("Metric", static_cast<sal_Int32>( meUnit ))
+    };
+
+    rtl::Reference<svt::PopupWindowController> xControl(mxControl);
+    xControl->EndPopupMode();
+    xControl->dispatchCommand(".uno:ExtrusionDepthDialog", aArgs);
+    mbCommandDispatched = true;
+}
+
+IMPL_LINK(ExtrusionDepthWindow, SelectHdl, weld::Toggleable&, rButton, void)
+{
+    if (mbSettingValue || !rButton.get_active())
+        return;
+
+    // see MouseReleaseHdl for mbCommandDispatched check, there's no guarantee
+    // this toggle will happen before that mouse release though it does in
+    // practice for vcl and gtk
+    if (mbCommandDispatched)
+        return;
+
+    if (mxCustom->get_active())
+        DispatchDepthDialog();
+    else
+    {
+        double fDepth;
+
+        if (mxInfinity->get_active())
+        {
+            fDepth = 338666.6;
+        }
+        else
+        {
+            int nSelected;
+            if (mxDepth0->get_active())
+                nSelected = 0;
+            else if (mxDepth1->get_active())
+                nSelected = 1;
+            else if (mxDepth2->get_active())
+                nSelected = 2;
+            else if (mxDepth3->get_active())
+                nSelected = 3;
+            else
+                nSelected = 4;
+
+            fDepth = IsMetric( meUnit ) ? aDepthListMM[nSelected] : aDepthListInch[nSelected];
+        }
+
+        Sequence< PropertyValue > aArgs{ comphelper::makePropertyValue(
+            OUString(gsExtrusionDepth).copy(5), fDepth) };
+
+        mxControl->dispatchCommand( gsExtrusionDepth,  aArgs );
+        mbCommandDispatched = true;
+        implSetDepth( fDepth );
+
+        mxControl->EndPopupMode();
+    }
+}
+
+IMPL_LINK_NOARG(ExtrusionDepthWindow, MouseReleaseHdl, const MouseEvent&, bool)
+{
+    /*
+     tdf#145296 if the "custom" radiobutton was presented preselected as
+     toggled on and the user clicked on it then there's no toggled signal sent
+     because the item was already toggled on and didn't change state.
+
+     So if that happens launch the custom spacing dialog explicitly here on
+     mouse release.
+    */
+    if (mxCustom->get_active() && !mbCommandDispatched)
+    {
+        DispatchDepthDialog();
+        return true;
+    }
+    return false;
+}
+
+// ExtrusionDirectionControl
+ExtrusionDepthController::ExtrusionDepthController(
+    const Reference< XComponentContext >& rxContext
+)   : svt::PopupWindowController(
+        rxContext,
+        Reference< css::frame::XFrame >(),
+        ".uno:ExtrusionDepthFloater"
+    )
+{
+}
+
+std::unique_ptr<WeldToolbarPopup> ExtrusionDepthController::weldPopupWindow()
+{
+    return std::make_unique<ExtrusionDepthWindow>(this, m_pToolbar);
+}
+
+VclPtr<vcl::Window> ExtrusionDepthController::createVclPopupWindow( vcl::Window* pParent )
+{
+    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
+        std::make_unique<ExtrusionDepthWindow>(this, pParent->GetFrameWeld()));
+
+    mxInterimPopover->Show();
+
+    return mxInterimPopover;
+}
+
+// XInitialization
+void SAL_CALL ExtrusionDepthController::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
+{
+    svt::PopupWindowController::initialize( aArguments );
+
+    ToolBox* pToolBox = nullptr;
+    ToolBoxItemId nId;
+    if ( getToolboxId( nId, &pToolBox ) )
+        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
+}
+
+// XServiceInfo
+
+
+OUString ExtrusionDepthController::getImplementationName()
+{
+    return "com.sun.star.comp.svx.ExtrusionDepthController";
+}
+
+
+Sequence< OUString > ExtrusionDepthController::getSupportedServiceNames()
+{
+    return { "com.sun.star.frame.ToolbarController" };
+}
+
+
+extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
+com_sun_star_comp_svx_ExtrusionDepthController_get_implementation(
+    css::uno::XComponentContext* xContext,
+    css::uno::Sequence<css::uno::Any> const &)
+{
+    return cppu::acquire(new ExtrusionDepthController(xContext));
+}
+
+
+constexpr OUStringLiteral g_sExtrusionLightingDirection = u".uno:ExtrusionLightingDirection";
+constexpr OUStringLiteral g_sExtrusionLightingIntensity = u".uno:ExtrusionLightingIntensity";
+
+ExtrusionLightingWindow::ExtrusionLightingWindow(svt::PopupWindowController* pControl,
+                                                 weld::Widget* pParent)
+    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/lightingwindow.ui", "LightingWindow")
+    , mxControl(pControl)
+    , mxLightingSet(new ValueSet(nullptr))
+    , mxLightingSetWin(new weld::CustomWeld(*m_xBuilder, "valueset", *mxLightingSet))
+    , mxBright(m_xBuilder->weld_radio_button("bright"))
+    , mxNormal(m_xBuilder->weld_radio_button("normal"))
+    , mxDim(m_xBuilder->weld_radio_button("dim"))
+{
+    mxLightingSet->SetStyle(WB_TABSTOP | WB_MENUSTYLEVALUESET | WB_FLATVALUESET | WB_NOBORDER | WB_NO_DIRECTSELECT);
+
+    for (sal_uInt16 i = FROM_TOP_LEFT; i <= FROM_BOTTOM_RIGHT; ++i)
+    {
+        if( i != FROM_FRONT )
+        {
+            maImgLightingOff[i] = Image(StockImage::Yes, OUString(aLightOffBmps[i]));
+            maImgLightingOn[i] = Image(StockImage::Yes, OUString(aLightOnBmps[i]));
+        }
+        maImgLightingPreview[i] = Image(StockImage::Yes, OUString(aLightPreviewBmps[i]));
+    }
+
+    mxLightingSet->SetHelpId( HID_VALUESET_EXTRUSION_LIGHTING );
+
+    mxLightingSet->SetSelectHdl( LINK( this, ExtrusionLightingWindow, SelectValueSetHdl ) );
+    mxLightingSet->SetColCount( 3 );
+    mxLightingSet->EnableFullItemMode( false );
+
+    for (sal_uInt16 i = FROM_TOP_LEFT; i <= FROM_BOTTOM_RIGHT; ++i)
+    {
+        if( i != FROM_FRONT )
+        {
+            mxLightingSet->InsertItem( i+1, maImgLightingOff[i] );
+        }
+        else
+        {
+            mxLightingSet->InsertItem( 5, maImgLightingPreview[FROM_FRONT] );
+        }
+    }
+    Size aSize(72, 72);
+    mxLightingSet->GetDrawingArea()->set_size_request(aSize.Width(), aSize.Height());
+    mxLightingSet->SetOutputSizePixel(aSize);
+
+    mxBright->connect_toggled(LINK(this, ExtrusionLightingWindow, SelectToolbarMenuHdl));
+    mxNormal->connect_toggled(LINK(this, ExtrusionLightingWindow, SelectToolbarMenuHdl));
+    mxDim->connect_toggled(LINK(this, ExtrusionLightingWindow, SelectToolbarMenuHdl));
+
+    AddStatusListener( g_sExtrusionLightingDirection );
+    AddStatusListener( g_sExtrusionLightingIntensity );
+}
+
+void ExtrusionLightingWindow::GrabFocus()
+{
+    mxLightingSet->GrabFocus();
+}
+
+ExtrusionLightingWindow::~ExtrusionLightingWindow()
+{
+}
+
+void ExtrusionLightingWindow::implSetIntensity( int nLevel, bool bEnabled )
+{
+    mxBright->set_sensitive(bEnabled);
+    mxBright->set_active(nLevel == 0 && bEnabled);
+    mxNormal->set_sensitive(bEnabled);
+    mxNormal->set_active(nLevel == 1 && bEnabled);
+    mxDim->set_sensitive(bEnabled);
+    mxDim->set_active(nLevel == 2 && bEnabled);
+}
+
+void ExtrusionLightingWindow::implSetDirection( int nDirection, bool bEnabled )
+{
+    if( !bEnabled )
+        nDirection = FROM_FRONT;
+
+    sal_uInt16 nItemId;
+    for( nItemId = FROM_TOP_LEFT; nItemId <= FROM_BOTTOM_RIGHT; nItemId++ )
+    {
+        if( nItemId == FROM_FRONT )
+        {
+            mxLightingSet->SetItemImage( nItemId + 1, maImgLightingPreview[ nDirection ] );
+        }
+        else
+        {
+            mxLightingSet->SetItemImage(
+                nItemId + 1,
+                static_cast<sal_uInt16>(nDirection) == nItemId ? maImgLightingOn[nItemId] : maImgLightingOff[nItemId]
+            );
+        }
+    }
+
+    if (bEnabled)
+        mxLightingSet->Enable();
+    else
+        mxLightingSet->Disable();
+}
+
+void ExtrusionLightingWindow::statusChanged(
+    const css::frame::FeatureStateEvent& Event
+)
+{
+    if( Event.FeatureURL.Main == g_sExtrusionLightingIntensity )
+    {
+        if( !Event.IsEnabled )
+        {
+            implSetIntensity( 0, false );
+        }
+        else
+        {
+            sal_Int32 nValue = 0;
+            if( Event.State >>= nValue )
+                implSetIntensity( nValue, true );
+        }
+    }
+    else if( Event.FeatureURL.Main == g_sExtrusionLightingDirection )
+    {
+        if( !Event.IsEnabled )
+        {
+            implSetDirection( 0, false );
+        }
+        else
+        {
+            sal_Int32 nValue = 0;
+            if( Event.State >>= nValue )
+                implSetDirection( nValue, true );
+        }
+    }
+}
+
+IMPL_LINK_NOARG(ExtrusionLightingWindow, SelectValueSetHdl, ValueSet*, void)
+{
+    sal_Int32 nDirection = mxLightingSet->GetSelectedItemId();
+
+    if( (nDirection > 0) && (nDirection < 10) )
+    {
+        nDirection--;
+
+        Sequence< PropertyValue > aArgs{ comphelper::makePropertyValue(
+            OUString(g_sExtrusionLightingDirection).copy(5), nDirection) };
+
+        mxControl->dispatchCommand( g_sExtrusionLightingDirection, aArgs );
+
+        implSetDirection( nDirection, true );
+    }
+
+    mxControl->EndPopupMode();
+}
+
+IMPL_LINK(ExtrusionLightingWindow, SelectToolbarMenuHdl, weld::Toggleable&, rButton, void)
+{
+    if (!rButton.get_active())
+        return;
+
+    int nLevel;
+    if (mxBright->get_active())
+        nLevel = 0;
+    else if (mxNormal->get_active())
+        nLevel = 1;
+    else
+        nLevel = 2;
+
+    Sequence< PropertyValue > aArgs{ comphelper::makePropertyValue(
+        OUString(g_sExtrusionLightingIntensity).copy(5), static_cast<sal_Int32>(nLevel)) };
+
+    mxControl->dispatchCommand( g_sExtrusionLightingIntensity, aArgs );
+
+    implSetIntensity( nLevel, true );
+
+    mxControl->EndPopupMode();
+}
+
+ExtrusionLightingControl::ExtrusionLightingControl(
+    const Reference< XComponentContext >& rxContext
+)   : svt::PopupWindowController( rxContext,
+                Reference< css::frame::XFrame >(),
+                ".uno:ExtrusionDirectionFloater"
+    )
+{
+}
+
+std::unique_ptr<WeldToolbarPopup> ExtrusionLightingControl::weldPopupWindow()
+{
+    return std::make_unique<ExtrusionLightingWindow>(this, m_pToolbar);
+}
+
+VclPtr<vcl::Window> ExtrusionLightingControl::createVclPopupWindow( vcl::Window* pParent )
+{
+    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
+        std::make_unique<ExtrusionLightingWindow>(this, pParent->GetFrameWeld()));
+
+    mxInterimPopover->Show();
+
+    return mxInterimPopover;
+}
+
+// XInitialization
+void SAL_CALL ExtrusionLightingControl::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
+{
+    svt::PopupWindowController::initialize( aArguments );
+
+    ToolBox* pToolBox = nullptr;
+    ToolBoxItemId nId;
+    if ( getToolboxId( nId, &pToolBox ) )
+        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
+}
+
+// XServiceInfo
+
+
+OUString ExtrusionLightingControl::getImplementationName()
+{
+    return "com.sun.star.comp.svx.ExtrusionLightingController";
+}
+
+
+Sequence< OUString > ExtrusionLightingControl::getSupportedServiceNames()
+{
+    return { "com.sun.star.frame.ToolbarController" };
+}
+
+
+extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
+com_sun_star_comp_svx_ExtrusionLightingControl_get_implementation(
+    css::uno::XComponentContext* xContext,
+    css::uno::Sequence<css::uno::Any> const &)
+{
+    return cppu::acquire(new ExtrusionLightingControl(xContext));
+}
+
+
+constexpr OUStringLiteral g_sExtrusionSurface = u".uno:ExtrusionSurface";
+
+ExtrusionSurfaceWindow::ExtrusionSurfaceWindow(svt::PopupWindowController* pControl, weld::Widget* pParent)
+    : WeldToolbarPopup(pControl->getFrameInterface(), pParent, "svx/ui/surfacewindow.ui", "SurfaceWindow")
+    , mxControl(pControl)
+    , mxWireFrame(m_xBuilder->weld_radio_button("wireframe"))
+    , mxMatt(m_xBuilder->weld_radio_button("matt"))
+    , mxPlastic(m_xBuilder->weld_radio_button("plastic"))
+    , mxMetal(m_xBuilder->weld_radio_button("metal"))
+    , mxMetalMSO(m_xBuilder->weld_radio_button("metalMSO"))
+{
+    mxWireFrame->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
+    mxMatt->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
+    mxPlastic->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
+    mxMetal->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
+    mxMetalMSO->connect_toggled(LINK(this, ExtrusionSurfaceWindow, SelectHdl));
+
+    AddStatusListener( g_sExtrusionSurface );
+}
+
+void ExtrusionSurfaceWindow::GrabFocus()
+{
+    mxWireFrame->grab_focus();
+}
+
+void ExtrusionSurfaceWindow::implSetSurface( int nSurface, bool bEnabled )
+{
+    mxWireFrame->set_active(nSurface == 0 && bEnabled);
+    mxWireFrame->set_sensitive(bEnabled);
+    mxMatt->set_active(nSurface == 1 && bEnabled);
+    mxMatt->set_sensitive(bEnabled);
+    mxPlastic->set_active(nSurface == 2 && bEnabled);
+    mxPlastic->set_sensitive(bEnabled);
+    mxMetal->set_active(nSurface == 3 && bEnabled);
+    mxMetal->set_sensitive(bEnabled);
+    mxMetalMSO->set_active(nSurface == 4 && bEnabled);
+    mxMetalMSO->set_sensitive(bEnabled);
+}
+
+void ExtrusionSurfaceWindow::statusChanged(
+    const css::frame::FeatureStateEvent& Event
+)
+{
+    if( Event.FeatureURL.Main != g_sExtrusionSurface )
+        return;
+
+    if( !Event.IsEnabled )
+    {
+        implSetSurface( 0, false );
+    }
+    else
+    {
+        sal_Int32 nValue = 0;
+        if( Event.State >>= nValue )
+            implSetSurface( nValue, true );
+    }
+}
+
+IMPL_LINK(ExtrusionSurfaceWindow, SelectHdl, weld::Toggleable&, rButton, void)
+{
+    if (!rButton.get_active())
+        return;
+
+    sal_Int32 nSurface;
+    if (mxWireFrame->get_active())
+        nSurface = 0;
+    else if (mxMatt->get_active())
+        nSurface = 1;
+    else if (mxPlastic->get_active())
+        nSurface = 2;
+    else if (mxMetal->get_active())
+        nSurface = 3;
+    else
+        nSurface = 4;
+
+    Sequence< PropertyValue > aArgs{ comphelper::makePropertyValue(
+        OUString(g_sExtrusionSurface).copy(5), nSurface) };
+
+    mxControl->dispatchCommand( g_sExtrusionSurface, aArgs );
+
+    implSetSurface( nSurface, true );
+
+    mxControl->EndPopupMode();
+}
+
+ExtrusionSurfaceControl::ExtrusionSurfaceControl(
+    const Reference< XComponentContext >& rxContext
+)
+:   svt::PopupWindowController(
+        rxContext,
+        Reference< css::frame::XFrame >(),
+        ".uno:ExtrusionSurfaceFloater"
+    )
+{
+}
+
+std::unique_ptr<WeldToolbarPopup> ExtrusionSurfaceControl::weldPopupWindow()
+{
+    return std::make_unique<ExtrusionSurfaceWindow>(this, m_pToolbar);
+}
+
+VclPtr<vcl::Window> ExtrusionSurfaceControl::createVclPopupWindow( vcl::Window* pParent )
+{
+    mxInterimPopover = VclPtr<InterimToolbarPopup>::Create(getFrameInterface(), pParent,
+        std::make_unique<ExtrusionSurfaceWindow>(this, pParent->GetFrameWeld()));
+
+    mxInterimPopover->Show();
+
+    return mxInterimPopover;
+}
+
+// XInitialization
+void SAL_CALL ExtrusionSurfaceControl::initialize( const css::uno::Sequence< css::uno::Any >& aArguments )
+{
+    svt::PopupWindowController::initialize( aArguments );
+
+    ToolBox* pToolBox = nullptr;
+    ToolBoxItemId nId;
+    if ( getToolboxId( nId, &pToolBox ) )
+        pToolBox->SetItemBits( nId, pToolBox->GetItemBits( nId ) | ToolBoxItemBits::DROPDOWNONLY );
+}
+
+// XServiceInfo
+
+
+OUString ExtrusionSurfaceControl::getImplementationName()
+{
+    return "com.sun.star.comp.svx.ExtrusionSurfaceController";
+}
+
+
+Sequence< OUString > ExtrusionSurfaceControl::getSupportedServiceNames()
+{
+    return { "com.sun.star.frame.ToolbarController" };
+}
+
+
+extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
+com_sun_star_comp_svx_ExtrusionSurfaceControl_get_implementation(
+    css::uno::XComponentContext* xContext,
+    css::uno::Sequence<css::uno::Any> const &)
+{
+    return cppu::acquire(new ExtrusionSurfaceControl(xContext));
+}
+
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */