diff options
Diffstat (limited to 'sw/source/ui/dbui/mmaddressblockpage.cxx')
| -rw-r--r-- | sw/source/ui/dbui/mmaddressblockpage.cxx | 1581 |
1 files changed, 1581 insertions, 0 deletions
diff --git a/sw/source/ui/dbui/mmaddressblockpage.cxx b/sw/source/ui/dbui/mmaddressblockpage.cxx new file mode 100644 index 000000000..53e4165d1 --- /dev/null +++ b/sw/source/ui/dbui/mmaddressblockpage.cxx @@ -0,0 +1,1581 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include "mmaddressblockpage.hxx" +#include <mailmergewizard.hxx> +#include <swtypes.hxx> +#include "addresslistdialog.hxx" +#include <editeng/eeitem.hxx> +#include <o3tl/safeint.hxx> +#include <svl/grabbagitem.hxx> +#include <svl/itemset.hxx> +#include <vcl/commandevent.hxx> +#include <vcl/event.hxx> +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> +#include <vcl/transfer.hxx> +#include <mmconfigitem.hxx> +#include <com/sun/star/container/XNameAccess.hpp> +#include <com/sun/star/datatransfer/dnd/XDropTarget.hpp> +#include <com/sun/star/sdbc/SQLException.hpp> +#include <com/sun/star/sdbcx/XColumnsSupplier.hpp> +#include <com/sun/star/sdb/XColumn.hpp> +#include <comphelper/sequence.hxx> +#include <comphelper/string.hxx> +#include <tools/diagnose_ex.h> + +#include <vector> +#include <strings.hrc> +#include <mmaddressblockpage.hrc> +#include <helpids.h> + +using namespace ::com::sun::star; +using namespace ::com::sun::star::container; +using namespace ::com::sun::star::sdb; +using namespace ::com::sun::star::sdbc; +using namespace ::com::sun::star::sdbcx; + +SwMailMergeAddressBlockPage::SwMailMergeAddressBlockPage(weld::Container* pPage, SwMailMergeWizard* pWizard) + : vcl::OWizardPage(pPage, pWizard, "modules/swriter/ui/mmaddressblockpage.ui", "MMAddressBlockPage") + , m_pWizard(pWizard) + , m_xAddressListPB(m_xBuilder->weld_button("addresslist")) + , m_xCurrentAddressFI(m_xBuilder->weld_label("currentaddress")) + , m_xStep2(m_xBuilder->weld_container("step2")) + , m_xStep3(m_xBuilder->weld_container("step3")) + , m_xStep4(m_xBuilder->weld_container("step4")) + , m_xSettingsFI(m_xBuilder->weld_label("settingsft")) + , m_xAddressCB(m_xBuilder->weld_check_button("address")) + , m_xSettingsPB(m_xBuilder->weld_button("settings")) + , m_xHideEmptyParagraphsCB(m_xBuilder->weld_check_button("hideempty")) + , m_xAssignPB(m_xBuilder->weld_button("assign")) + , m_xDocumentIndexFI(m_xBuilder->weld_label("documentindex")) + , m_xPrevSetIB(m_xBuilder->weld_button("prev")) + , m_xNextSetIB(m_xBuilder->weld_button("next")) + , m_xDifferentlist(m_xBuilder->weld_button("differentlist")) + , m_xSettings(new SwAddressPreview(m_xBuilder->weld_scrolled_window("settingspreviewwin", true))) + , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("addresspreviewwin", true))) + , m_xSettingsWIN(new weld::CustomWeld(*m_xBuilder, "settingspreview", *m_xSettings)) + , m_xPreviewWIN(new weld::CustomWeld(*m_xBuilder, "addresspreview", *m_xPreview)) +{ + m_xSettingsWIN->set_size_request(m_xDifferentlist->get_approximate_digit_width() * 40, + m_xDifferentlist->get_text_height() * 6); + m_xPreviewWIN->set_size_request(m_xDifferentlist->get_approximate_digit_width() * 44, + m_xDifferentlist->get_text_height() * 6); + m_sChangeAddress = m_xDifferentlist->get_label(); + m_sDocument = m_xDocumentIndexFI->get_label(); + + m_sCurrentAddress = m_xCurrentAddressFI->get_label(); + m_xAddressListPB->connect_clicked(LINK(this, SwMailMergeAddressBlockPage, AddressListHdl_Impl)); + m_xSettingsPB->connect_clicked(LINK(this, SwMailMergeAddressBlockPage, SettingsHdl_Impl)); + m_xAssignPB->connect_clicked(LINK(this, SwMailMergeAddressBlockPage, AssignHdl_Impl )); + m_xAddressCB->connect_toggled(LINK(this, SwMailMergeAddressBlockPage, AddressBlockHdl_Impl)); + m_xSettings->SetSelectHdl(LINK(this, SwMailMergeAddressBlockPage, AddressBlockSelectHdl_Impl)); + m_xHideEmptyParagraphsCB->connect_toggled(LINK(this, SwMailMergeAddressBlockPage, HideParagraphsHdl_Impl)); + + Link<weld::Button&,void> aLink = LINK(this, SwMailMergeAddressBlockPage, InsertDataHdl_Impl); + m_xPrevSetIB->connect_clicked(aLink); + m_xNextSetIB->connect_clicked(aLink); + + // lock in preferred size including current address line + Size aSize1(m_xContainer->get_preferred_size()); + + OUString sOrigLabel = m_xAddressListPB->get_label(); + m_xAddressListPB->set_label(m_sChangeAddress); + Size aSize2(m_xContainer->get_preferred_size()); + m_xAddressListPB->set_label(sOrigLabel); + + m_xCurrentAddressFI->hide(); + + m_xContainer->set_size_request(std::max(aSize1.Width(), aSize2.Width()), + std::max(aSize1.Height(), aSize2.Height())); +} + +SwMailMergeAddressBlockPage::~SwMailMergeAddressBlockPage() +{ + m_xPreviewWIN.reset(); + m_xSettingsWIN.reset(); + m_xPreview.reset(); + m_xSettings.reset(); +} + +bool SwMailMergeAddressBlockPage::canAdvance() const +{ + return m_pWizard->GetConfigItem().GetResultSet().is(); +} + +void SwMailMergeAddressBlockPage::Activate() +{ + SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem(); + bool bIsLetter = rConfigItem.IsOutputToLetter(); + + //no address block is created for e-Mail + m_xStep2->set_visible(bIsLetter); + m_xStep3->set_visible(bIsLetter); + m_xStep4->set_visible(bIsLetter); + + if (!bIsLetter) + return; + + m_xHideEmptyParagraphsCB->set_active( rConfigItem.IsHideEmptyParagraphs() ); + m_xDocumentIndexFI->set_label(m_sDocument.replaceFirst("%1", "1")); + + m_xSettings->Clear(); + const uno::Sequence< OUString> aBlocks = + m_pWizard->GetConfigItem().GetAddressBlocks(); + for(const auto& rAddress : aBlocks) + m_xSettings->AddAddress(rAddress); + m_xSettings->SelectAddress(o3tl::narrowing<sal_uInt16>(rConfigItem.GetCurrentAddressBlockIndex())); + m_xAddressCB->set_active(rConfigItem.IsAddressBlock()); + AddressBlockHdl_Impl(*m_xAddressCB); + m_xSettings->SetLayout(1, 2); + InsertDataHdl(nullptr); +} + +bool SwMailMergeAddressBlockPage::commitPage( ::vcl::WizardTypes::CommitPageReason _eReason ) +{ + return ::vcl::WizardTypes::eTravelForward != _eReason || m_pWizard->GetConfigItem().GetResultSet().is(); +} + +IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, AddressListHdl_Impl, weld::Button&, void) +{ + try + { + SwAddressListDialog aAddrDialog(this); + if (RET_OK == aAddrDialog.run()) + { + SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem(); + rConfigItem.SetCurrentConnection( + aAddrDialog.GetSource(), + aAddrDialog.GetConnection(), + aAddrDialog.GetColumnsSupplier(), + aAddrDialog.GetDBData()); + OUString sFilter = aAddrDialog.GetFilter(); + rConfigItem.SetFilter( sFilter ); + InsertDataHdl(nullptr); + GetWizard()->UpdateRoadmap(); + GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE)); + } + } + catch (const uno::Exception& e) + { + TOOLS_WARN_EXCEPTION("sw", ""); + std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(m_pWizard->getDialog(), + VclMessageType::Warning, VclButtonsType::Ok, e.Message)); + xBox->run(); + } +} + +IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, SettingsHdl_Impl, weld::Button&, void) +{ + SwSelectAddressBlockDialog aDlg(m_pWizard->getDialog(), m_pWizard->GetConfigItem()); + SwMailMergeConfigItem& rConfig = m_pWizard->GetConfigItem(); + aDlg.SetAddressBlocks(rConfig.GetAddressBlocks(), m_xSettings->GetSelectedAddress()); + aDlg.SetSettings(rConfig.IsIncludeCountry(), rConfig.GetExcludeCountry()); + if (aDlg.run() == RET_OK) + { + //the dialog provides the selected address at the first position! + const uno::Sequence< OUString> aBlocks = aDlg.GetAddressBlocks(); + rConfig.SetAddressBlocks(aBlocks); + m_xSettings->Clear(); + for(const auto& rAddress : aBlocks) + m_xSettings->AddAddress(rAddress); + m_xSettings->SelectAddress(0); + m_xSettings->Invalidate(); // #i40408 + rConfig.SetCountrySettings(aDlg.IsIncludeCountry(), aDlg.GetCountry()); + InsertDataHdl(nullptr); + } + GetWizard()->UpdateRoadmap(); + GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE)); +} + +IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, AssignHdl_Impl, weld::Button&, void) +{ + SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem(); + const sal_uInt16 nSel = m_xSettings->GetSelectedAddress(); + const uno::Sequence< OUString> aBlocks = rConfigItem.GetAddressBlocks(); + SwAssignFieldsDialog aDlg(m_pWizard->getDialog(), m_pWizard->GetConfigItem(), aBlocks[nSel], true); + if(RET_OK == aDlg.run()) + { + //preview update + InsertDataHdl(nullptr); + GetWizard()->UpdateRoadmap(); + GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE)); + } +} + +void SwMailMergeAddressBlockPage::EnableAddressBlock(bool bAll, bool bSelective) +{ + m_xSettingsFI->set_sensitive(bAll); + m_xAddressCB->set_sensitive(bAll); + bSelective &= bAll; + m_xHideEmptyParagraphsCB->set_sensitive(bSelective); + m_xSettingsWIN->set_sensitive(bSelective); + m_xSettingsPB->set_sensitive(bSelective); + m_xStep3->set_sensitive(bSelective); + m_xStep4->set_sensitive(bSelective); +} + +IMPL_LINK(SwMailMergeAddressBlockPage, AddressBlockHdl_Impl, weld::Toggleable&, rBox, void) +{ + EnableAddressBlock(rBox.get_sensitive(), rBox.get_active()); + SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem(); + rConfigItem.SetAddressBlock(m_xAddressCB->get_active()); + m_pWizard->UpdateRoadmap(); + GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE)); +} + +IMPL_LINK_NOARG(SwMailMergeAddressBlockPage, AddressBlockSelectHdl_Impl, LinkParamNone*, void) +{ + const sal_uInt16 nSel = m_xSettings->GetSelectedAddress(); + const uno::Sequence< OUString> aBlocks = + m_pWizard->GetConfigItem().GetAddressBlocks(); + m_xPreview->SetAddress(SwAddressPreview::FillData(aBlocks[nSel], + m_pWizard->GetConfigItem())); + m_pWizard->GetConfigItem().SetCurrentAddressBlockIndex( nSel ); + GetWizard()->UpdateRoadmap(); + GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE)); +} + +IMPL_LINK(SwMailMergeAddressBlockPage, HideParagraphsHdl_Impl, weld::Toggleable&, rBox, void) +{ + SwMailMergeConfigItem& rConfigItem = m_pWizard->GetConfigItem(); + rConfigItem.SetHideEmptyParagraphs(rBox.get_active()); +} + +void SwMailMergeAddressBlockPage::InsertDataHdl(const weld::Button* pButton) +{ + //if no pButton is given, the first set has to be pre-set + SwMailMergeConfigItem& rConfig = m_pWizard->GetConfigItem(); + std::unique_ptr<weld::WaitObject> xWaitObj(new weld::WaitObject(m_pWizard->getDialog())); + if(!pButton) + { + rConfig.GetResultSet(); + } + else + { + bool bNext = pButton == m_xNextSetIB.get(); + sal_Int32 nPos = rConfig.GetResultSetPosition(); + rConfig.MoveResultSet( bNext ? ++nPos : --nPos); + } + xWaitObj.reset(); + sal_Int32 nPos = rConfig.GetResultSetPosition(); + bool bEnable = true; + if(nPos < 1) + { + bEnable = false; + nPos = 1; + } + else + { + //if output type is letter + if (m_xSettings->IsVisible()) + { + //Fill data into preview + const sal_uInt16 nSel = m_xSettings->GetSelectedAddress(); + const uno::Sequence< OUString> aBlocks = + m_pWizard->GetConfigItem().GetAddressBlocks(); + m_xPreview->SetAddress(SwAddressPreview::FillData(aBlocks[nSel], rConfig)); + } + } + m_xPrevSetIB->set_sensitive(bEnable); + m_xDocumentIndexFI->set_label(m_sDocument.replaceFirst("%1", OUString::number(nPos))); + + GetWizard()->enableButtons(WizardButtonFlags::NEXT, GetWizard()->isStateEnabled(MM_GREETINGSPAGE)); + bool bHasResultSet = rConfig.GetResultSet().is(); + m_xCurrentAddressFI->set_visible(bHasResultSet); + if(bHasResultSet) + { + m_xCurrentAddressFI->set_label(m_sCurrentAddress.replaceFirst("%1", rConfig.GetCurrentDBData().sDataSource)); + m_xAddressListPB->set_label(m_sChangeAddress); + } + EnableAddressBlock(bHasResultSet, m_xAddressCB->get_active()); +} + +IMPL_LINK(SwMailMergeAddressBlockPage, InsertDataHdl_Impl, weld::Button&, rButton, void) +{ + InsertDataHdl(&rButton); +} + +SwSelectAddressBlockDialog::SwSelectAddressBlockDialog(weld::Window* pParent, SwMailMergeConfigItem& rConfig) + : SfxDialogController(pParent, "modules/swriter/ui/selectblockdialog.ui", "SelectBlockDialog") + , m_rConfig(rConfig) + , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("previewwin", true))) + , m_xNewPB(m_xBuilder->weld_button("new")) + , m_xCustomizePB(m_xBuilder->weld_button("edit")) + , m_xDeletePB(m_xBuilder->weld_button("delete")) + , m_xNeverRB(m_xBuilder->weld_radio_button("never")) + , m_xAlwaysRB(m_xBuilder->weld_radio_button("always")) + , m_xDependentRB(m_xBuilder->weld_radio_button("dependent")) + , m_xCountryED(m_xBuilder->weld_entry("country")) + , m_xPreviewWin(new weld::CustomWeld(*m_xBuilder, "preview", *m_xPreview)) +{ + m_xPreviewWin->set_size_request(m_xCountryED->get_approximate_digit_width() * 45, + m_xCountryED->get_text_height() * 12); + + Link<weld::Button&,void> aCustomizeHdl = LINK(this, SwSelectAddressBlockDialog, NewCustomizeHdl_Impl); + m_xNewPB->connect_clicked(aCustomizeHdl); + m_xCustomizePB->connect_clicked(aCustomizeHdl); + + m_xDeletePB->connect_clicked(LINK(this, SwSelectAddressBlockDialog, DeleteHdl_Impl)); + + Link<weld::Toggleable&,void> aLk = LINK(this, SwSelectAddressBlockDialog, IncludeHdl_Impl); + m_xNeverRB->connect_toggled(aLk); + m_xAlwaysRB->connect_toggled(aLk); + m_xDependentRB->connect_toggled(aLk); + m_xPreview->SetLayout(2, 2); + m_xPreview->EnableScrollBar(); +} + +SwSelectAddressBlockDialog::~SwSelectAddressBlockDialog() +{ +} + +void SwSelectAddressBlockDialog::SetAddressBlocks(const uno::Sequence< OUString>& rBlocks, + sal_uInt16 nSelectedAddress) +{ + m_aAddressBlocks = rBlocks; + for (const auto& rAddressBlock : std::as_const(m_aAddressBlocks)) + m_xPreview->AddAddress(rAddressBlock); + m_xPreview->SelectAddress(nSelectedAddress); +} + +// return the address blocks and put the selected one to the first position +const uno::Sequence< OUString >& SwSelectAddressBlockDialog::GetAddressBlocks() +{ + //put the selected block to the first position + const sal_Int32 nSelect = static_cast<sal_Int32>(m_xPreview->GetSelectedAddress()); + if(nSelect) + { + uno::Sequence< OUString >aTemp(m_aAddressBlocks.getLength()); + auto it = aTemp.getArray(); + *it = std::as_const(m_aAddressBlocks)[nSelect]; + it = std::copy_n(std::cbegin(m_aAddressBlocks), nSelect - 1, std::next(it)); + std::copy(std::next(std::cbegin(m_aAddressBlocks), nSelect + 1), std::cend(m_aAddressBlocks), it); + m_aAddressBlocks = aTemp; + } + return m_aAddressBlocks; +} + +void SwSelectAddressBlockDialog::SetSettings( + bool bIsCountry, const OUString& rCountry) +{ + weld::RadioButton *pActive = m_xNeverRB.get(); + if(bIsCountry) + { + pActive = !rCountry.isEmpty() ? m_xDependentRB.get() : m_xAlwaysRB.get(); + m_xCountryED->set_text(rCountry); + } + pActive->set_active(true); + IncludeHdl_Impl(*pActive); + m_xDeletePB->set_sensitive(m_aAddressBlocks.getLength() > 1); +} + +OUString SwSelectAddressBlockDialog::GetCountry() const +{ + if (m_xDependentRB->get_active()) + return m_xCountryED->get_text(); + return OUString(); +} + +IMPL_LINK(SwSelectAddressBlockDialog, DeleteHdl_Impl, weld::Button&, rButton, void) +{ + if (m_aAddressBlocks.getLength()) + { + const sal_Int32 nSelected = static_cast<sal_Int32>(m_xPreview->GetSelectedAddress()); + comphelper::removeElementAt(m_aAddressBlocks, nSelected); + if (m_aAddressBlocks.getLength() <= 1) + rButton.set_sensitive(false); + m_xPreview->RemoveSelectedAddress(); + } +} + +IMPL_LINK(SwSelectAddressBlockDialog, NewCustomizeHdl_Impl, weld::Button&, rButton, void) +{ + bool bCustomize = &rButton == m_xCustomizePB.get(); + SwCustomizeAddressBlockDialog::DialogType nType = bCustomize ? + SwCustomizeAddressBlockDialog::ADDRESSBLOCK_EDIT : + SwCustomizeAddressBlockDialog::ADDRESSBLOCK_NEW; + std::unique_ptr<SwCustomizeAddressBlockDialog> xDlg(new SwCustomizeAddressBlockDialog(&rButton, + m_rConfig, nType)); + if(bCustomize) + { + xDlg->SetAddress(m_aAddressBlocks[m_xPreview->GetSelectedAddress()]); + } + if (RET_OK != xDlg->run()) + return; + + const OUString sNew = xDlg->GetAddress(); + if(bCustomize) + { + m_xPreview->ReplaceSelectedAddress(sNew); + m_aAddressBlocks.getArray()[m_xPreview->GetSelectedAddress()] = sNew; + } + else + { + m_xPreview->AddAddress(sNew); + m_aAddressBlocks.realloc(m_aAddressBlocks.getLength() + 1); + const sal_Int32 nSelect = m_aAddressBlocks.getLength() - 1; + m_aAddressBlocks.getArray()[nSelect] = sNew; + m_xPreview->SelectAddress(o3tl::narrowing<sal_uInt16>(nSelect)); + } + m_xDeletePB->set_sensitive(m_aAddressBlocks.getLength() > 1); +} + +IMPL_LINK_NOARG(SwSelectAddressBlockDialog, IncludeHdl_Impl, weld::Toggleable&, void) +{ + m_xCountryED->set_sensitive(m_xDependentRB->get_active()); +} + +#define USER_DATA_SALUTATION -1 +#define USER_DATA_PUNCTUATION -2 +#define USER_DATA_TEXT -3 +#define USER_DATA_NONE -4 + +IMPL_LINK(SwCustomizeAddressBlockDialog, TextFilterHdl, OUString&, rTest, bool) +{ + rTest = m_aTextFilter.filter(rTest); + return true; +} + +SwCustomizeAddressBlockDialog::SwCustomizeAddressBlockDialog( + weld::Widget* pParent, SwMailMergeConfigItem& rConfig, DialogType eType) + : SfxDialogController(pParent, "modules/swriter/ui/addressblockdialog.ui", + "AddressBlockDialog") + , m_aTextFilter("<>") + , m_rConfigItem(rConfig) + , m_eType(eType) + , m_aSelectionChangedIdle("SwCustomizeAddressBlockDialog m_aSelectionChangedIdle") + , m_xAddressElementsFT(m_xBuilder->weld_label("addressesft")) + , m_xAddressElementsLB(m_xBuilder->weld_tree_view("addresses")) + , m_xInsertFieldIB(m_xBuilder->weld_button("toaddr")) + , m_xRemoveFieldIB(m_xBuilder->weld_button("fromaddr")) + , m_xDragFT(m_xBuilder->weld_label("addressdestft")) + , m_xUpIB(m_xBuilder->weld_button("up")) + , m_xLeftIB(m_xBuilder->weld_button("left")) + , m_xRightIB(m_xBuilder->weld_button("right")) + , m_xDownIB(m_xBuilder->weld_button("down")) + , m_xFieldFT(m_xBuilder->weld_label("customft")) + , m_xFieldCB(m_xBuilder->weld_combo_box("custom")) + , m_xOK(m_xBuilder->weld_button("ok")) + , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("previewwin", true))) + , m_xPreviewWIN(new weld::CustomWeld(*m_xBuilder, "addrpreview", *m_xPreview)) + , m_xDragED(new AddressMultiLineEdit(this)) + , m_xDragWIN(new weld::CustomWeld(*m_xBuilder, "addressdest", *m_xDragED)) +{ + m_aSelectionChangedIdle.SetInvokeHandler( LINK( this, SwCustomizeAddressBlockDialog, SelectionChangedIdleHdl ) ); + + Size aSize(m_xDragED->GetDrawingArea()->get_size_request()); + m_xPreview->set_size_request(aSize.Width(), aSize.Height()); + + m_xFieldCB->connect_entry_insert_text(LINK(this, SwCustomizeAddressBlockDialog, TextFilterHdl)); + m_xAddressElementsLB->set_size_request(-1, m_xAddressElementsLB->get_height_rows(16)); + + if( eType >= GREETING_FEMALE ) + { + m_xFieldFT->show(); + m_xFieldCB->show(); + m_xAddressElementsLB->append(OUString::number(USER_DATA_SALUTATION), SwResId(ST_SALUTATION)); + m_xAddressElementsLB->append(OUString::number(USER_DATA_PUNCTUATION), SwResId(ST_PUNCTUATION)); + m_xAddressElementsLB->append(OUString::number(USER_DATA_TEXT), SwResId(ST_TEXT)); + for (size_t i = 0; i < SAL_N_ELEMENTS(RA_SALUTATION); ++i) + m_aSalutations.push_back(SwResId(RA_SALUTATION[i])); + for (size_t i = 0; i < SAL_N_ELEMENTS(RA_PUNCTUATION); ++i) + m_aPunctuations.push_back(SwResId(RA_PUNCTUATION[i])); + m_xDragED->SetText(" "); + m_xDialog->set_title(SwResId(eType == GREETING_MALE ? ST_TITLE_MALE : ST_TITLE_FEMALE)); + m_xAddressElementsFT->set_label(SwResId(ST_SALUTATIONELEMENTS)); + m_xInsertFieldIB->set_tooltip_text(SwResId(ST_INSERTSALUTATIONFIELD)); + m_xRemoveFieldIB->set_tooltip_text(SwResId(ST_REMOVESALUTATIONFIELD)); + m_xDragFT->set_label(SwResId(ST_DRAGSALUTATION)); + } + else + { + if (eType == ADDRESSBLOCK_EDIT) + m_xDialog->set_title(SwResId(ST_TITLE_EDIT)); + m_xDragED->SetText("\n\n\n\n\n"); + /* Set custom HIDs for swriter/01/mm_newaddblo.xhp */ + m_xAddressElementsLB->set_help_id( HID_MM_ADDBLOCK_ELEMENTS ); + m_xInsertFieldIB->set_help_id( HID_MM_ADDBLOCK_INSERT ); + m_xRemoveFieldIB->set_help_id( HID_MM_ADDBLOCK_REMOVE ); + m_xDragWIN->set_help_id( HID_MM_ADDBLOCK_DRAG ); + m_xPreviewWIN->set_help_id( HID_MM_ADDBLOCK_PREVIEW ); + m_xRightIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS ); + m_xLeftIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS ); + m_xDownIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS ); + m_xUpIB->set_help_id( HID_MM_ADDBLOCK_MOVEBUTTONS ); + } + + const std::vector<std::pair<OUString, int>>& rHeaders = m_rConfigItem.GetDefaultAddressHeaders(); + for (size_t i = 0; i < rHeaders.size(); ++i) + m_xAddressElementsLB->append(OUString::number(i), rHeaders[i].first); + m_xOK->connect_clicked(LINK(this, SwCustomizeAddressBlockDialog, OKHdl_Impl)); + m_xAddressElementsLB->connect_changed(LINK(this, SwCustomizeAddressBlockDialog, ListBoxSelectHdl_Impl)); + if (m_xAddressElementsLB->n_children()) + m_xAddressElementsLB->select(0); + m_xDragED->SetModifyHdl(LINK(this, SwCustomizeAddressBlockDialog, EditModifyHdl_Impl)); + m_xDragED->SetSelectionChangedHdl( LINK( this, SwCustomizeAddressBlockDialog, SelectionChangedHdl_Impl)); + m_xFieldCB->connect_changed(LINK(this, SwCustomizeAddressBlockDialog, FieldChangeComboBoxHdl_Impl)); + Link<weld::Button&,void> aImgButtonHdl = LINK(this, SwCustomizeAddressBlockDialog, ImageButtonHdl_Impl); + m_xInsertFieldIB->connect_clicked(aImgButtonHdl); + m_xRemoveFieldIB->connect_clicked(aImgButtonHdl); + m_xUpIB->connect_clicked(aImgButtonHdl); + m_xLeftIB->connect_clicked(aImgButtonHdl); + m_xRightIB->connect_clicked(aImgButtonHdl); + m_xDownIB->connect_clicked(aImgButtonHdl); + UpdateImageButtons_Impl(); +} + +bool SwCustomizeAddressBlockDialog::SetCursorLogicPosition(const Point& rPosition) +{ + return m_xDragED->SetCursorLogicPosition(rPosition); +} + +void SwCustomizeAddressBlockDialog::UpdateFields() +{ + m_xDragED->UpdateFields(); +} + +SwCustomizeAddressBlockDialog::~SwCustomizeAddressBlockDialog() +{ + m_xDragED->EndDropTarget(); +} + +IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, OKHdl_Impl, weld::Button&, void) +{ + m_xDialog->response(RET_OK); +} + +IMPL_LINK(SwCustomizeAddressBlockDialog, ListBoxSelectHdl_Impl, weld::TreeView&, rBox, void) +{ + sal_Int32 nUserData = rBox.get_selected_id().toInt32(); + // Check if the selected entry is already in the address and then forbid inserting + m_xInsertFieldIB->set_sensitive(nUserData >= 0 || !HasItem(nUserData)); +} + +IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, EditModifyHdl_Impl, AddressMultiLineEdit&, void) +{ + m_xPreview->SetAddress(SwAddressPreview::FillData(GetAddress(), m_rConfigItem)); + UpdateImageButtons_Impl(); +} + +IMPL_LINK(SwCustomizeAddressBlockDialog, ImageButtonHdl_Impl, weld::Button&, rButton, void) +{ + if (m_xInsertFieldIB.get() == &rButton) + { + int nEntry = m_xAddressElementsLB->get_selected_index(); + if (nEntry != -1) + { + m_xDragED->InsertNewEntry("<" + m_xAddressElementsLB->get_text(nEntry) + ">"); + } + } + else if (m_xRemoveFieldIB.get() == &rButton) + { + m_xDragED->RemoveCurrentEntry(); + } + else + { + MoveItemFlags nMove = MoveItemFlags::Down; + if (m_xUpIB.get() == &rButton) + nMove = MoveItemFlags::Up; + else if (m_xLeftIB.get() == &rButton) + nMove = MoveItemFlags::Left; + else if (m_xRightIB.get() == &rButton) + nMove = MoveItemFlags::Right; + m_xDragED->MoveCurrentItem(nMove); + } + UpdateImageButtons_Impl(); +} + +sal_Int32 SwCustomizeAddressBlockDialog::GetSelectedItem_Impl() const +{ + sal_Int32 nRet = USER_DATA_NONE; + const OUString sSelected = m_xDragED->GetCurrentItem(); + if(!sSelected.isEmpty()) + { + for (int i = 0, nEntryCount = m_xAddressElementsLB->n_children(); i < nEntryCount; ++i) + { + const OUString sEntry = m_xAddressElementsLB->get_text(i); + if( sEntry == sSelected.subView( 1, sSelected.getLength() - 2 ) ) + { + nRet = m_xAddressElementsLB->get_id(i).toInt32(); + break; + } + } + } + return nRet; +} + +bool SwCustomizeAddressBlockDialog::HasItem(sal_Int32 nUserData) +{ + //get the entry from the ListBox + OUString sEntry; + for (int i = 0, nEntryCount = m_xAddressElementsLB->n_children(); i < nEntryCount; ++i) + { + if (m_xAddressElementsLB->get_id(i).toInt32() == nUserData) + { + sEntry = m_xAddressElementsLB->get_text(i); + break; + } + } + //search for this entry in the content + return m_xDragED->GetText().indexOf(OUStringConcatenation("<" + sEntry + ">")) >= 0; +} + +IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, SelectionChangedIdleHdl, Timer*, void) +{ + // called in case the selection of the edit field changes. + // determine selection - if it's one of the editable fields then + // enable the related ComboBox and fill it + + // don't trigger outself again + m_xDragED->SetSelectionChangedHdl(Link<bool, void>()); + + sal_Int32 nSelected = GetSelectedItem_Impl(); + if (USER_DATA_NONE != nSelected) + m_xDragED->SelectCurrentItem(); + + if(m_xFieldCB->get_visible() && (USER_DATA_NONE != nSelected) && (nSelected < 0)) + { + //search in ListBox if it's one of the first entries + OUString sSelect; + std::vector<OUString>* pVector = nullptr; + switch(nSelected) { + case USER_DATA_SALUTATION: + sSelect = m_sCurrentSalutation; + pVector = &m_aSalutations; + break; + case USER_DATA_PUNCTUATION: + sSelect = m_sCurrentPunctuation; + pVector = &m_aPunctuations; + break; + case USER_DATA_TEXT: + sSelect = m_sCurrentText; + break; + } + m_xFieldCB->clear(); + if(pVector) { + for (const auto& rItem : *pVector) + m_xFieldCB->append_text(rItem); + } + m_xFieldCB->set_entry_text(sSelect); + m_xFieldCB->set_sensitive(true); + m_xFieldFT->set_sensitive(true); + } + else + { + m_xFieldCB->set_sensitive(false); + m_xFieldFT->set_sensitive(false); + } + + UpdateImageButtons_Impl(); + m_xDragED->SetSelectionChangedHdl( LINK( this, SwCustomizeAddressBlockDialog, SelectionChangedHdl_Impl)); +} + +IMPL_LINK(SwCustomizeAddressBlockDialog, SelectionChangedHdl_Impl, bool, bIdle, void) +{ + if (bIdle) + m_aSelectionChangedIdle.Start(); + else + { + m_aSelectionChangedIdle.Stop(); + SelectionChangedIdleHdl(nullptr); + } +} + +IMPL_LINK_NOARG(SwCustomizeAddressBlockDialog, FieldChangeComboBoxHdl_Impl, weld::ComboBox&, void) +{ + //changing the field content changes the related members, too + sal_Int32 nSelected = GetSelectedItem_Impl(); + const OUString sContent = m_xFieldCB->get_active_text(); + switch(nSelected) { + case USER_DATA_SALUTATION: + m_sCurrentSalutation = sContent; + break; + case USER_DATA_PUNCTUATION: + m_sCurrentPunctuation = sContent; + break; + case USER_DATA_TEXT: + m_sCurrentText = sContent; + break; + } + UpdateImageButtons_Impl(); + m_xPreview->SetAddress(GetAddress()); + EditModifyHdl_Impl(*m_xDragED); +} + +void SwCustomizeAddressBlockDialog::UpdateImageButtons_Impl() +{ + MoveItemFlags nMove = m_xDragED->IsCurrentItemMoveable(); + m_xUpIB->set_sensitive( bool(nMove & MoveItemFlags::Up) ); + m_xLeftIB->set_sensitive( bool(nMove & MoveItemFlags::Left) ); + m_xRightIB->set_sensitive( bool(nMove & MoveItemFlags::Right) ); + m_xDownIB->set_sensitive( bool(nMove & MoveItemFlags::Down) ); + m_xRemoveFieldIB->set_sensitive(m_xDragED->HasCurrentItem()); + int nEntry = m_xAddressElementsLB->get_selected_index(); + m_xInsertFieldIB->set_sensitive( nEntry != -1 && + (m_xAddressElementsLB->get_id(nEntry).toInt32() >= 0 || !m_xFieldCB->get_active_text().isEmpty())); +} + +void SwCustomizeAddressBlockDialog::SetAddress(const OUString& rAddress) +{ + m_xDragED->SetText(rAddress); + UpdateImageButtons_Impl(); + EditModifyHdl_Impl(*m_xDragED); +} + +OUString SwCustomizeAddressBlockDialog::GetAddress() const +{ + OUString sAddress(m_xDragED->GetAddress()); + //remove placeholders by the actual content + if (m_xFieldFT->get_visible()) + { + for (int i = 0, nEntryCount = m_xAddressElementsLB->n_children(); i < nEntryCount; ++i) + { + const OUString sEntry = "<" + m_xAddressElementsLB->get_text(i) + ">"; + sal_Int32 nUserData = m_xAddressElementsLB->get_id(i).toInt32(); + switch(nUserData) + { + case USER_DATA_SALUTATION: + sAddress = sAddress.replaceFirst(sEntry, m_sCurrentSalutation); + break; + case USER_DATA_PUNCTUATION: + sAddress = sAddress.replaceFirst(sEntry, m_sCurrentPunctuation); + break; + case USER_DATA_TEXT: + sAddress = sAddress.replaceFirst(sEntry, m_sCurrentText); + break; + } + } + } + return sAddress; +} + +namespace { + +struct SwAssignFragment +{ + std::unique_ptr<weld::Builder> m_xBuilder; + std::unique_ptr<weld::Label> m_xLabel; + std::unique_ptr<weld::ComboBox> m_xComboBox; + std::unique_ptr<weld::Label> m_xPreview; + + SwAssignFragment(weld::Container* pGrid, int nLine) + : m_xBuilder(Application::CreateBuilder(pGrid, "modules/swriter/ui/assignfragment.ui")) + , m_xLabel(m_xBuilder->weld_label("label")) + , m_xComboBox(m_xBuilder->weld_combo_box("combobox")) + , m_xPreview(m_xBuilder->weld_label("preview")) + { + m_xLabel->set_grid_left_attach(0); + m_xLabel->set_grid_top_attach(nLine); + + m_xComboBox->set_grid_left_attach(1); + m_xComboBox->set_grid_top_attach(nLine); + + m_xPreview->set_grid_left_attach(2); + m_xPreview->set_grid_top_attach(nLine); + } +}; + +} + +class SwAssignFieldsControl +{ + friend class SwAssignFieldsDialog; + std::unique_ptr<weld::ScrolledWindow> m_xVScroll; + std::unique_ptr<weld::Container> m_xGrid; + + std::vector<SwAssignFragment> m_aFields; + + SwMailMergeConfigItem* m_rConfigItem; + + Link<LinkParamNone*,void> m_aModifyHdl; + + DECL_LINK(MatchHdl_Impl, weld::ComboBox&, void); + DECL_LINK(GotFocusHdl_Impl, weld::Widget&, void); + + void MakeVisible(const tools::Rectangle & rRect); +public: + SwAssignFieldsControl(std::unique_ptr<weld::ScrolledWindow> xWindow, + std::unique_ptr<weld::Container> xGrid); + + void Init(SwAssignFieldsDialog* pDialog, SwMailMergeConfigItem& rConfigItem); + void SetModifyHdl(const Link<LinkParamNone*,void>& rModifyHdl) + { + m_aModifyHdl = rModifyHdl; + m_aModifyHdl.Call(nullptr); + } +}; + +SwAssignFieldsControl::SwAssignFieldsControl(std::unique_ptr<weld::ScrolledWindow> xWindow, + std::unique_ptr<weld::Container> xGrid) + : m_xVScroll(std::move(xWindow)) + , m_xGrid(std::move(xGrid)) + , m_rConfigItem(nullptr) +{ +} + +void SwAssignFieldsControl::Init(SwAssignFieldsDialog* pDialog, SwMailMergeConfigItem& rConfigItem) +{ + m_rConfigItem = &rConfigItem; + + //get the name of the default headers + const std::vector<std::pair<OUString, int>>& rHeaders = rConfigItem.GetDefaultAddressHeaders(); + //get the actual data + uno::Reference< XColumnsSupplier > xColsSupp( rConfigItem.GetResultSet(), uno::UNO_QUERY); + //get the name of the actual columns + uno::Reference <XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr; + uno::Sequence< OUString > aFields; + if(xColAccess.is()) + aFields = xColAccess->getElementNames(); + + //get the current assignment list + //each position in this sequence matches the position in the header array rHeaders + //if no assignment is available an empty sequence will be returned + uno::Sequence< OUString> aAssignments = rConfigItem.GetColumnAssignment( rConfigItem.GetCurrentDBData() ); + Link<weld::ComboBox&,void> aMatchHdl = LINK(this, SwAssignFieldsControl, MatchHdl_Impl); + Link<weld::Widget&,void> aFocusHdl = LINK(this, SwAssignFieldsControl, GotFocusHdl_Impl); + + int nLabelWidth(0), nComboBoxWidth(0), nPreviewWidth(0); + + //fill the controls + for (size_t i = 0; i < rHeaders.size(); ++i) + { + m_aFields.emplace_back(m_xGrid.get(), i); + + const OUString rHeader = rHeaders[i].first; + weld::ComboBox& rNewLB = *m_aFields.back().m_xComboBox; + rNewLB.append_text(SwResId(SW_STR_NONE)); + rNewLB.set_active(0); + + for (const OUString& rField : std::as_const(aFields)) + rNewLB.append_text(rField); + //select the ListBox + //if there is an assignment + if(o3tl::make_unsigned(aAssignments.getLength()) > i && !aAssignments[i].isEmpty()) + rNewLB.set_active_text(aAssignments[i]); + else //otherwise the current column name may match one of the db columns + rNewLB.set_active_text(rHeader); + + weld::Label& rNewText = *m_aFields.back().m_xLabel; + rNewText.set_label("<" + rHeader + ">"); + + weld::Label& rNewPreview = *m_aFields.back().m_xPreview; + //then the preview can be filled accordingly + if (xColAccess.is() && rNewLB.get_active() > 0 && + xColAccess->hasByName(rNewLB.get_active_text())) + { + uno::Any aCol = xColAccess->getByName(rNewLB.get_active_text()); + uno::Reference< XColumn > xColumn; + aCol >>= xColumn; + if(xColumn.is()) + { + try + { + rNewPreview.set_label(xColumn->getString()); + } + catch (const SQLException&) + { + } + } + } + + if (i == 0) + { + auto nLineHeight = m_xGrid->get_preferred_size().Height(); + m_xVScroll->set_size_request(m_xVScroll->get_approximate_digit_width() * 65, + nLineHeight * 6); + nComboBoxWidth = rNewLB.get_preferred_size().Width(); + } + + nLabelWidth = std::max<int>(nLabelWidth, rNewText.get_preferred_size().Width()); + nPreviewWidth = std::max<int>(nPreviewWidth, rNewPreview.get_preferred_size().Width()); + + rNewLB.connect_changed(aMatchHdl); + rNewLB.connect_focus_in(aFocusHdl); + rNewText.show(); + rNewLB.show(); + rNewPreview.show(); + } + pDialog->ConnectSizeGroups(nLabelWidth, nComboBoxWidth, nPreviewWidth); +} + +void SwAssignFieldsControl::MakeVisible(const tools::Rectangle & rRect) +{ + //determine range of visible positions + auto nMinVisiblePos = m_xVScroll->vadjustment_get_value(); + auto nMaxVisiblePos = nMinVisiblePos + m_xVScroll->vadjustment_get_page_size(); + if (rRect.Top() < nMinVisiblePos || rRect.Bottom() > nMaxVisiblePos) + m_xVScroll->vadjustment_set_value(rRect.Top()); +} + +IMPL_LINK(SwAssignFieldsControl, MatchHdl_Impl, weld::ComboBox&, rBox, void) +{ + const OUString sColumn = rBox.get_active_text(); + uno::Reference< XColumnsSupplier > xColsSupp( m_rConfigItem->GetResultSet(), uno::UNO_QUERY); + uno::Reference <XNameAccess> xColAccess = xColsSupp.is() ? xColsSupp->getColumns() : nullptr; + OUString sPreview; + if(xColAccess.is() && xColAccess->hasByName(sColumn)) + { + uno::Any aCol = xColAccess->getByName(sColumn); + uno::Reference< XColumn > xColumn; + aCol >>= xColumn; + if(xColumn.is()) + { + try + { + sPreview = xColumn->getString(); + } + catch (const sdbc::SQLException&) + { + } + } + } + auto aLBIter = std::find_if(m_aFields.begin(), m_aFields.end(), [&rBox](const SwAssignFragment& rFragment){ + return &rBox == rFragment.m_xComboBox.get(); }); + if (aLBIter != m_aFields.end()) + { + auto nIndex = static_cast<sal_Int32>(std::distance(m_aFields.begin(), aLBIter)); + m_aFields[nIndex].m_xPreview->set_label(sPreview); + } + m_aModifyHdl.Call(nullptr); +} + +IMPL_LINK(SwAssignFieldsControl, GotFocusHdl_Impl, weld::Widget&, rBox, void) +{ + int x, y, width, height; + rBox.get_extents_relative_to(*m_xGrid, x, y, width, height); + // the container has a border of 3 in the .ui + tools::Rectangle aRect(Point(x - 3, y - 3), Size(width + 6, height + 6)); + MakeVisible(aRect); +} + +SwAssignFieldsDialog::SwAssignFieldsDialog( + weld::Window* pParent, SwMailMergeConfigItem& rConfigItem, + const OUString& rPreview, + bool bIsAddressBlock) + : SfxDialogController(pParent, "modules/swriter/ui/assignfieldsdialog.ui", "AssignFieldsDialog") + , m_sNone(SwResId(SW_STR_NONE)) + , m_rPreviewString(rPreview) + , m_rConfigItem(rConfigItem) + , m_xPreview(new SwAddressPreview(m_xBuilder->weld_scrolled_window("previewwin", true))) + , m_xMatchingFI(m_xBuilder->weld_label("MATCHING_LABEL")) + , m_xAddressTitle(m_xBuilder->weld_label("addresselem")) + , m_xMatchTitle(m_xBuilder->weld_label("matchelem")) + , m_xPreviewTitle(m_xBuilder->weld_label("previewelem")) + , m_xPreviewFI(m_xBuilder->weld_label("PREVIEW_LABEL")) + , m_xOK(m_xBuilder->weld_button("ok")) + , m_xPreviewWin(new weld::CustomWeld(*m_xBuilder, "PREVIEW", *m_xPreview)) + , m_xFieldsControl(new SwAssignFieldsControl(m_xBuilder->weld_scrolled_window("scroll"), + m_xBuilder->weld_container("FIELDS"))) +{ + m_xPreviewWin->set_size_request(m_xMatchingFI->get_approximate_digit_width() * 45, + m_xMatchingFI->get_text_height() * 5); + m_xFieldsControl->Init(this, rConfigItem); + + const OUString sMatchesTo( SwResId(ST_MATCHESTO) ); + if (!bIsAddressBlock) + { + m_xPreviewFI->set_label(SwResId(ST_SALUTATIONPREVIEW)); + m_xMatchingFI->set_label(SwResId(ST_SALUTATIONMATCHING)); + m_xAddressTitle->set_label(SwResId(ST_SALUTATIONELEMENT)); + } + + m_xFieldsControl->SetModifyHdl(LINK(this, SwAssignFieldsDialog, AssignmentModifyHdl_Impl )); + m_xMatchingFI->set_label(m_xMatchingFI->get_label().replaceAll("%1", sMatchesTo)); + m_xOK->connect_clicked(LINK(this, SwAssignFieldsDialog, OkHdl_Impl)); +} + +SwAssignFieldsDialog::~SwAssignFieldsDialog() +{ +} + +uno::Sequence< OUString > SwAssignFieldsDialog::CreateAssignments() +{ + uno::Sequence< OUString > aAssignments( + m_rConfigItem.GetDefaultAddressHeaders().size()); + OUString* pAssignments = aAssignments.getArray(); + sal_Int32 nIndex = 0; + for (const auto& rLBItem : m_xFieldsControl->m_aFields) + { + const OUString sSelect = rLBItem.m_xComboBox->get_active_text(); + pAssignments[nIndex] = (m_sNone != sSelect) ? sSelect : OUString(); + ++nIndex; + } + return aAssignments; +} + +IMPL_LINK_NOARG(SwAssignFieldsDialog, OkHdl_Impl, weld::Button&, void) +{ + m_rConfigItem.SetColumnAssignment( + m_rConfigItem.GetCurrentDBData(), + CreateAssignments() ); + m_xDialog->response(RET_OK); +} + +IMPL_LINK_NOARG(SwAssignFieldsDialog, AssignmentModifyHdl_Impl, LinkParamNone*, void) +{ + uno::Sequence< OUString > aAssignments = CreateAssignments(); + const OUString sPreview = SwAddressPreview::FillData( + m_rPreviewString, m_rConfigItem, &aAssignments); + m_xPreview->SetAddress(sPreview); +} + +void SwAssignFieldsDialog::ConnectSizeGroups(int nLabelWidth, int nComboBoxWidth, int nPreviewWidth) +{ + m_xAddressTitle->set_size_request(nLabelWidth, -1); + m_xMatchTitle->set_size_request(nComboBoxWidth, -1); + m_xPreviewTitle->set_size_request(nPreviewWidth, -1); +} + +namespace +{ + const EECharAttrib* FindCharAttrib(int nStartPosition, std::vector<EECharAttrib>& rAttribList) + { + for (auto it = rAttribList.rbegin(); it != rAttribList.rend(); ++it) + { + const auto& rTextAtr = *it; + if (rTextAtr.pAttr->Which() != EE_CHAR_GRABBAG) + continue; + if (rTextAtr.nStart <= nStartPosition && rTextAtr.nEnd >= nStartPosition) + { + return &rTextAtr; + } + } + + return nullptr; + } +} + +AddressMultiLineEdit::AddressMultiLineEdit(SwCustomizeAddressBlockDialog *pParent) + : m_pParentDialog(pParent) +{ +} + +void AddressMultiLineEdit::EndDropTarget() +{ + if (m_xDropTarget.is()) + { + m_xEditEngine->RemoveView(m_xEditView.get()); + auto xRealDropTarget = GetDrawingArea()->get_drop_target(); + uno::Reference<css::datatransfer::dnd::XDropTargetListener> xListener(m_xDropTarget, uno::UNO_QUERY); + xRealDropTarget->removeDropTargetListener(xListener); + m_xDropTarget.clear(); + } +} + +AddressMultiLineEdit::~AddressMultiLineEdit() +{ + assert(!m_xDropTarget.is()); +} + +void AddressMultiLineEdit::SetDrawingArea(weld::DrawingArea* pDrawingArea) +{ + Size aSize(pDrawingArea->get_ref_device().LogicToPixel(Size(160, 60), MapMode(MapUnit::MapAppFont))); + pDrawingArea->set_size_request(aSize.Width(), aSize.Height()); + WeldEditView::SetDrawingArea(pDrawingArea); +} + +bool AddressMultiLineEdit::KeyInput(const KeyEvent& rKEvt) +{ + if (rKEvt.GetKeyCode().GetCode() == KEY_ESCAPE) + return false; // we want default esc behaviour + if (rKEvt.GetCharCode()) + return true; // handled + return WeldEditView::KeyInput(rKEvt); +} + +bool AddressMultiLineEdit::Command(const CommandEvent& rCEvt) +{ + if (rCEvt.GetCommand() == CommandEventId::StartExtTextInput || + rCEvt.GetCommand() == CommandEventId::EndExtTextInput || + rCEvt.GetCommand() == CommandEventId::ExtTextInput) + { + return true; + } + return WeldEditView::Command(rCEvt); +} + +bool AddressMultiLineEdit::MouseButtonDown(const MouseEvent& rMEvt) +{ + if (rMEvt.GetClicks() >= 2) + return true; // handled + return WeldEditView::MouseButtonDown(rMEvt); +} + +OUString AddressMultiLineEdit::GetText() const +{ + return m_xEditEngine->GetText(); +} + +void AddressMultiLineEdit::SetText( const OUString& rStr ) +{ + m_xEditEngine->SetText(rStr); + //set attributes to all address tokens + + sal_Int32 nSequence(0); + SfxGrabBagItem aProtectAttr(EE_CHAR_GRABBAG); + const sal_uInt32 nParaCount = m_xEditEngine->GetParagraphCount(); + for(sal_uInt32 nPara = 0; nPara < nParaCount; ++nPara) + { + sal_Int32 nIndex = 0; + const OUString sPara = m_xEditEngine->GetText( nPara ); + if (!sPara.isEmpty() && !sPara.endsWith(" ")) + { + ESelection aPaM(nPara, sPara.getLength(), nPara, sPara.getLength()); + m_xEditEngine->QuickInsertText(" ", aPaM); + } + for(;;) + { + const sal_Int32 nStart = sPara.indexOf( '<', nIndex ); + if (nStart < 0) + break; + const sal_Int32 nEnd = sPara.indexOf( '>', nStart ); + if (nEnd < 0) + break; + nIndex = nEnd; + SfxItemSet aSet(m_xEditEngine->GetEmptyItemSet()); + // make each one different, so they are not collapsed together + // as one attribute + aProtectAttr.GetGrabBag()["Index"] <<= nSequence++; + aSet.Put(aProtectAttr); + m_xEditEngine->QuickSetAttribs(aSet, ESelection(nPara, nStart, nPara, nEnd + 1)); + } + + } + // add two empty paragraphs at the end + if(m_pParentDialog->m_eType == SwCustomizeAddressBlockDialog::ADDRESSBLOCK_NEW || + m_pParentDialog->m_eType == SwCustomizeAddressBlockDialog::ADDRESSBLOCK_EDIT) + { + sal_Int32 nLastLen = m_xEditEngine->GetText(nParaCount - 1).getLength(); + if(nLastLen) + { + int nPara = nParaCount ? nParaCount - 1 : 0; + ESelection aPaM(nPara, nLastLen, nPara, nLastLen); + m_xEditEngine->QuickInsertText("\n \n ", aPaM); + } + } + + m_xEditView->SetSelection(ESelection(0, 0, 0, 0)); +} + +// Insert the new entry in front of the entry at the beginning of the selection +void AddressMultiLineEdit::InsertNewEntry( const OUString& rStr ) +{ + // insert new entry after current selected one. + ESelection aSelection = m_xEditView->GetSelection(); + const sal_uInt32 nPara = aSelection.nStartPara; + + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(nPara, aAttribList); + + sal_Int32 nIndex = aSelection.nEndPara; + const EECharAttrib* pAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + if(nullptr != pAttrib) + nIndex = pAttrib->nEnd; + InsertNewEntryAtPosition( rStr, nPara, nIndex ); + + // select the new entry + m_xEditEngine->GetCharAttribs(nPara, aAttribList); + pAttrib = FindCharAttrib(nIndex, aAttribList); + const sal_Int32 nEnd = pAttrib ? pAttrib->nEnd : nIndex; + ESelection aEntrySel(nPara, nIndex, nPara, nEnd); + m_xEditView->SetSelection(aEntrySel); + Invalidate(); + m_aModifyLink.Call(*this); +} + +void AddressMultiLineEdit::InsertNewEntryAtPosition( const OUString& rStr, sal_uLong nPara, sal_uInt16 nIndex ) +{ + ESelection aInsertPos(nPara, nIndex, nPara, nIndex); + m_xEditEngine->QuickInsertText(rStr, aInsertPos); + + //restore the attributes + SetText( GetAddress() ); + + //select the newly inserted/moved element + m_xEditView->SetSelection(aInsertPos); + m_aSelectionLink.Call(false); +} + +void AddressMultiLineEdit::RemoveCurrentEntry() +{ + ESelection aSelection = m_xEditView->GetSelection(); + + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList); + + const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + if(pBeginAttrib && + (pBeginAttrib->nStart <= aSelection.nStartPos + && pBeginAttrib->nEnd >= aSelection.nEndPos)) + { + const sal_uInt32 nPara = aSelection.nStartPara; + ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd); + m_xEditEngine->QuickInsertText(OUString(), aEntrySel); + //restore the attributes + SetText( GetAddress() ); + m_aModifyLink.Call(*this); + } +} + +void AddressMultiLineEdit::MoveCurrentItem(MoveItemFlags nMove) +{ + ESelection aSelection = m_xEditView->GetSelection(); + + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList); + + const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + if(!pBeginAttrib || + pBeginAttrib->nStart > aSelection.nStartPos || + pBeginAttrib->nEnd < aSelection.nEndPos) + return; + + //current item has been found + sal_Int32 nPara = aSelection.nStartPara; + sal_Int32 nIndex = pBeginAttrib->nStart; + ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd); + const OUString sCurrentItem = m_xEditEngine->GetText(aEntrySel); + m_xEditEngine->RemoveAttribs(aEntrySel, false, EE_CHAR_GRABBAG); + m_xEditEngine->QuickInsertText(OUString(), aEntrySel); + m_xEditEngine->GetCharAttribs(nPara, aAttribList); + switch (nMove) + { + case MoveItemFlags::Left : + if(nIndex) + { + //go left to find a predecessor or simple text + --nIndex; + const OUString sPara = m_xEditEngine->GetText( nPara ); + sal_Int32 nSearchIndex = sPara.lastIndexOf( '>', nIndex+1 ); + if( nSearchIndex != -1 && nSearchIndex == nIndex ) + { + nSearchIndex = sPara.lastIndexOf( '<', nIndex ); + if( nSearchIndex != -1 ) + nIndex = nSearchIndex; + } + } + break; + case MoveItemFlags::Right: + { + //go right to find a successor or simple text + ++nIndex; + const EECharAttrib* pEndAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + if(pEndAttrib && pEndAttrib->nEnd >= nIndex) + { + nIndex = pEndAttrib->nEnd; + } + } + break; + case MoveItemFlags::Up : + --nPara; + nIndex = 0; + break; + case MoveItemFlags::Down : + ++nPara; + nIndex = 0; + break; + default: break; + } + //add a new paragraph if there is none yet + if (nPara >= m_xEditEngine->GetParagraphCount()) + { + auto nInsPara = nPara - 1; + auto nInsPos = m_xEditEngine->GetTextLen( nPara - 1 ); + ESelection aTemp(nInsPara, nInsPos, nInsPara, nInsPos); + m_xEditEngine->QuickInsertText("\n", aTemp); + } + InsertNewEntryAtPosition( sCurrentItem, nPara, nIndex ); + + // select the new entry [#i40817] + m_xEditEngine->GetCharAttribs(nPara, aAttribList); + const EECharAttrib* pAttrib = FindCharAttrib(nIndex, aAttribList); + if (pAttrib) + aEntrySel = ESelection(nPara, nIndex, nPara, pAttrib->nEnd); + m_xEditView->SetSelection(aEntrySel); + Invalidate(); + m_aModifyLink.Call(*this); +} + +MoveItemFlags AddressMultiLineEdit::IsCurrentItemMoveable() const +{ + MoveItemFlags nRet = MoveItemFlags::NONE; + ESelection aSelection = m_xEditView->GetSelection(); + + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList); + + const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + if (pBeginAttrib && + (pBeginAttrib->nStart <= aSelection.nStartPos + && pBeginAttrib->nEnd >= aSelection.nEndPos)) + { + if (pBeginAttrib->nStart) + nRet |= MoveItemFlags::Left; + //if there is an entry it can always be move to the right and down + nRet |= MoveItemFlags::Right | MoveItemFlags::Down; + if (aSelection.nStartPara > 0) + nRet |= MoveItemFlags::Up; + } + return nRet; +} + +bool AddressMultiLineEdit::HasCurrentItem() const +{ + ESelection aSelection = m_xEditView->GetSelection(); + + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList); + + const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + return (pBeginAttrib && + (pBeginAttrib->nStart <= aSelection.nStartPos + && pBeginAttrib->nEnd >= aSelection.nEndPos)); +} + +OUString AddressMultiLineEdit::GetCurrentItem() const +{ + ESelection aSelection = m_xEditView->GetSelection(); + + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList); + + const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + if (pBeginAttrib && + (pBeginAttrib->nStart <= aSelection.nStartPos + && pBeginAttrib->nEnd >= aSelection.nEndPos)) + { + const sal_uInt32 nPara = aSelection.nStartPara; + ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd); + return m_xEditEngine->GetText( aEntrySel ); + } + return OUString(); +} + +void AddressMultiLineEdit::SelectCurrentItem() +{ + ESelection aSelection = m_xEditView->GetSelection(); + + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList); + + const EECharAttrib* pBeginAttrib = FindCharAttrib(aSelection.nStartPos, aAttribList); + if (pBeginAttrib && + (pBeginAttrib->nStart <= aSelection.nStartPos + && pBeginAttrib->nEnd >= aSelection.nEndPos)) + { + const sal_uInt32 nPara = aSelection.nStartPara; + ESelection aEntrySel(nPara, pBeginAttrib->nStart, nPara, pBeginAttrib->nEnd); + m_xEditView->SetSelection(aEntrySel); + Invalidate(); + } +} + +OUString AddressMultiLineEdit::GetAddress() const +{ + OUString sRet; + const sal_uInt32 nParaCount = m_xEditEngine->GetParagraphCount(); + for(sal_uInt32 nPara = nParaCount; nPara; --nPara) + { + const OUString sPara = comphelper::string::stripEnd(m_xEditEngine->GetText(nPara - 1), ' '); + //don't add empty trailing paragraphs + if(!sRet.isEmpty() || !sPara.isEmpty()) + { + sRet = sPara + sRet; + //insert the para break + if(nPara > 1) + sRet = "\n" + sRet; + } + } + return sRet; +} + +void AddressMultiLineEdit::UpdateFields() +{ + ESelection aSelection = m_xEditView->GetSelection(); + + //restore the attributes + SetText( GetAddress() ); + + //reselect the element + m_xEditView->SetSelection(aSelection); + m_aSelectionLink.Call(false); +} + +void AddressMultiLineEdit::EditViewSelectionChange() +{ + WeldEditView::EditViewSelectionChange(); + m_aSelectionLink.Call(true); +} + +namespace +{ + // sit between the tree as drag source and the editview as drop target and translate + // the tree dnd data to the simple string the editview wants + class DropTargetListener : public cppu::WeakImplHelper< css::datatransfer::dnd::XDropTargetListener, + css::datatransfer::dnd::XDropTarget > + { + private: + css::uno::Reference<css::datatransfer::dnd::XDropTarget> m_xRealDropTarget; + std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> m_aListeners; + SwCustomizeAddressBlockDialog* m_pParentDialog; + + // XEventListener + virtual void SAL_CALL disposing( const css::lang::EventObject& ) override + { + m_xRealDropTarget.clear(); + m_aListeners.clear(); + } + + // XDropTargetListener + virtual void SAL_CALL drop( const css::datatransfer::dnd::DropTargetDropEvent& dtde ) override + { + SolarMutexGuard aGuard; + + auto aReplacement(dtde); + + Point aMousePos(dtde.LocationX, dtde.LocationY); + bool bAllowed = m_pParentDialog->SetCursorLogicPosition(aMousePos); + if (bAllowed) + { + if (weld::TreeView* pTree = m_pParentDialog->get_drag_source()) + { + int nEntry = pTree->get_selected_index(); + if (nEntry != -1) + { + sal_Int32 nUserData = pTree->get_id(nEntry).toInt32(); + //special entries can only be once in the address / greeting + if (nUserData >= 0 || !m_pParentDialog->HasItem(nUserData)) + { + rtl::Reference<TransferDataContainer> xContainer = new TransferDataContainer; + xContainer->CopyString( "<" + pTree->get_text(nEntry) + ">" ); + + // replace what the treeview is offering with what ImpEditView::drop wants + aReplacement.Transferable = xContainer.get(); + } + } + } + } + + std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners); + for (auto const& listener : aListeners) + listener->drop(aReplacement); + + if (bAllowed) + m_pParentDialog->UpdateFields(); + } + + virtual void SAL_CALL dragEnter( const css::datatransfer::dnd::DropTargetDragEnterEvent& dtdee ) override + { + auto aReplacement(dtdee); + // replace what the treeview is offering with what ImpEditView::dragEnter wants + aReplacement.SupportedDataFlavors.realloc(1); + SotExchange::GetFormatDataFlavor(SotClipboardFormatId::STRING, aReplacement.SupportedDataFlavors.getArray()[0]); + + std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners); + for (auto const& listener : aListeners) + listener->dragEnter(aReplacement); + } + + virtual void SAL_CALL dragExit( const css::datatransfer::dnd::DropTargetEvent& dte ) override + { + std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners); + for (auto const& listener : aListeners) + listener->dragExit( dte ); + } + + virtual void SAL_CALL dragOver( const css::datatransfer::dnd::DropTargetDragEvent& dtde ) override + { + std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners); + for (auto const& listener : aListeners) + listener->dragOver( dtde ); + } + + virtual void SAL_CALL dropActionChanged( const css::datatransfer::dnd::DropTargetDragEvent& dtde ) override + { + std::vector<css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>> aListeners(m_aListeners); + for (auto const& listener : aListeners) + listener->dropActionChanged( dtde ); + } + + // XDropTarget + virtual void SAL_CALL addDropTargetListener(const css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>& xListener) override + { + m_aListeners.push_back(xListener); + } + + virtual void SAL_CALL removeDropTargetListener(const css::uno::Reference<css::datatransfer::dnd::XDropTargetListener>& xListener) override + { + m_aListeners.erase(std::remove(m_aListeners.begin(), m_aListeners.end(), xListener), m_aListeners.end()); + } + + virtual sal_Bool SAL_CALL isActive() override + { + return m_xRealDropTarget->isActive(); + } + + virtual void SAL_CALL setActive(sal_Bool active) override + { + m_xRealDropTarget->setActive(active); + } + + virtual sal_Int8 SAL_CALL getDefaultActions() override + { + return m_xRealDropTarget->getDefaultActions(); + } + + virtual void SAL_CALL setDefaultActions(sal_Int8 actions) override + { + m_xRealDropTarget->setDefaultActions(actions); + } + + public: + DropTargetListener(css::uno::Reference<css::datatransfer::dnd::XDropTarget> xRealDropTarget, + SwCustomizeAddressBlockDialog* pParentDialog) + : m_xRealDropTarget(xRealDropTarget) + , m_pParentDialog(pParentDialog) + { + } + }; +} + +css::uno::Reference<css::datatransfer::dnd::XDropTarget> AddressMultiLineEdit::GetDropTarget() +{ + if (!m_xDropTarget.is()) + { + auto xRealDropTarget = GetDrawingArea()->get_drop_target(); + rtl::Reference<DropTargetListener> pProxy = new DropTargetListener(xRealDropTarget, m_pParentDialog); + xRealDropTarget->addDropTargetListener(pProxy); + m_xDropTarget = pProxy; + } + return m_xDropTarget; +} + +bool AddressMultiLineEdit::SetCursorLogicPosition(const Point& rPosition) +{ + Point aMousePos = EditViewOutputDevice().PixelToLogic(rPosition); + m_xEditView->SetCursorLogicPosition(aMousePos, false, true); + + ESelection aSelection = m_xEditView->GetSelection(); + std::vector<EECharAttrib> aAttribList; + m_xEditEngine->GetCharAttribs(aSelection.nStartPara, aAttribList); + return FindCharAttrib(aSelection.nStartPos, aAttribList) == nullptr; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |