diff options
Diffstat (limited to 'sw/source/uibase/config/prtopt.cxx')
| -rw-r--r-- | sw/source/uibase/config/prtopt.cxx | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/sw/source/uibase/config/prtopt.cxx b/sw/source/uibase/config/prtopt.cxx new file mode 100644 index 000000000..68764fab1 --- /dev/null +++ b/sw/source/uibase/config/prtopt.cxx @@ -0,0 +1,168 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <unotools/configmgr.hxx> +#include <prtopt.hxx> +#include <o3tl/any.hxx> +#include <osl/diagnose.h> +#include <com/sun/star/uno/Sequence.hxx> + +using namespace utl; +using namespace com::sun::star::uno; + +// Ctor +Sequence<OUString> SwPrintOptions::GetPropertyNames() const +{ + static const char* aPropNames[] = + { + "Content/Graphic", // 0 + "Content/Table", // 1 + "Content/Control", // 2 + "Content/Background", // 3 + "Content/PrintBlack", // 4 + "Content/Note", // 5 + "Page/Reversed", // 6 + "Page/Brochure", // 7 + "Page/BrochureRightToLeft", // 8 + "Output/SinglePrintJob", // 9 + "Output/Fax", // 10 + "Papertray/FromPrinterSetup", // 11 + "Content/Drawing", // 12 not in SW/Web + "Page/LeftPage", // 13 not in SW/Web + "Page/RightPage", // 14 not in SW/Web + "EmptyPages", // 15 not in SW/Web + "Content/PrintPlaceholders", // 16 not in Sw/Web + "Content/PrintHiddenText" // 17 not in Sw/Web + }; + const int nCount = m_bIsWeb ? 12 : 18; + Sequence<OUString> aNames(nCount); + OUString* pNames = aNames.getArray(); + for(int i = 0; i < nCount; i++) + { + pNames[i] = OUString::createFromAscii(aPropNames[i]); + } + return aNames; +} + +SwPrintOptions::SwPrintOptions(bool bWeb) : + ConfigItem(bWeb ? OUString("Office.WriterWeb/Print") : OUString("Office.Writer/Print"), + ConfigItemMode::ReleaseTree), + m_bIsWeb(bWeb) +{ + m_bPrintPageBackground = !bWeb; + m_bPrintBlackFont = bWeb; + m_bPrintTextPlaceholder = m_bPrintHiddenText = false; + if (bWeb) + m_bPrintEmptyPages = false; + + Sequence<OUString> aNames = GetPropertyNames(); + Sequence<Any> aValues = GetProperties(aNames); + const Any* pValues = aValues.getConstArray(); + OSL_ENSURE(aValues.getLength() == aNames.getLength(), "GetProperties failed"); + if(aValues.getLength() == aNames.getLength()) + { + for(int nProp = 0; nProp < aNames.getLength(); nProp++) + { + if(pValues[nProp].hasValue()) + { + switch(nProp) + { + case 0: m_bPrintGraphic = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 1: m_bPrintTable = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 2: m_bPrintControl = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 3: m_bPrintPageBackground= *o3tl::doAccess<bool>(pValues[nProp]); break; + case 4: m_bPrintBlackFont = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 5: + { + sal_Int32 nTmp = 0; + pValues[nProp] >>= nTmp; + m_nPrintPostIts = static_cast<SwPostItMode>(nTmp); + } + break; + case 6: m_bPrintReverse = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 7: m_bPrintProspect = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 8: m_bPrintProspectRTL = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 9: m_bPrintSingleJobs = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 10: pValues[nProp] >>= m_sFaxName; break; + case 11: m_bPaperFromSetup = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 12: m_bPrintDraw = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 13: m_bPrintLeftPages = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 14: m_bPrintRightPages = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 15: m_bPrintEmptyPages = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 16: m_bPrintTextPlaceholder = *o3tl::doAccess<bool>(pValues[nProp]); break; + case 17: m_bPrintHiddenText = *o3tl::doAccess<bool>(pValues[nProp]); break; + } + } + } + } + + // currently there is just one checkbox for print drawings and print graphics + // In the UI. (File/Print dialog and Tools/Options/.../Print) + // And since print graphics is the only available in Writer and WriterWeb... + + m_bPrintDraw = m_bPrintGraphic; +} + +SwPrintOptions::~SwPrintOptions() +{ +} + +void SwPrintOptions::Notify( const css::uno::Sequence< OUString >& ) {} + +void SwPrintOptions::ImplCommit() +{ + Sequence<OUString> aNames = GetPropertyNames(); + + Sequence<Any> aValues(aNames.getLength()); + Any* pValues = aValues.getArray(); + + for(int nProp = 0; nProp < aNames.getLength(); nProp++) + { + switch(nProp) + { + case 0: pValues[nProp] <<= m_bPrintGraphic; break; + case 1: pValues[nProp] <<= m_bPrintTable; break; + case 2: pValues[nProp] <<= m_bPrintControl; break; + case 3: pValues[nProp] <<= m_bPrintPageBackground; break; + case 4: pValues[nProp] <<= m_bPrintBlackFont; break; + case 5: pValues[nProp] <<= static_cast<sal_Int32>(m_nPrintPostIts) ; break; + case 6: pValues[nProp] <<= m_bPrintReverse; break; + case 7: pValues[nProp] <<= m_bPrintProspect; break; + case 8: pValues[nProp] <<= m_bPrintProspectRTL; break; + case 9: pValues[nProp] <<= m_bPrintSingleJobs; break; + case 10: pValues[nProp] <<= m_sFaxName; break; + case 11: pValues[nProp] <<= m_bPaperFromSetup; break; + case 12: pValues[nProp] <<= m_bPrintDraw; break; + case 13: pValues[nProp] <<= m_bPrintLeftPages; break; + case 14: pValues[nProp] <<= m_bPrintRightPages; break; + case 15: pValues[nProp] <<= m_bPrintEmptyPages; break; + case 16: pValues[nProp] <<= m_bPrintTextPlaceholder; break; + case 17: pValues[nProp] <<= m_bPrintHiddenText; break; + } + } + + // currently there is just one checkbox for print drawings and print graphics + // In the UI. (File/Print dialog and Tools/Options/.../Print) + // And since print graphics is the only available in Writer and WriterWeb... + m_bPrintDraw = m_bPrintGraphic; + + PutProperties(aNames, aValues); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |