diff options
Diffstat (limited to 'sw/source/uibase/uiview/view.cxx')
| -rw-r--r-- | sw/source/uibase/uiview/view.cxx | 1989 |
1 files changed, 1989 insertions, 0 deletions
diff --git a/sw/source/uibase/uiview/view.cxx b/sw/source/uibase/uiview/view.cxx new file mode 100644 index 000000000..ceb0de4c3 --- /dev/null +++ b/sw/source/uibase/uiview/view.cxx @@ -0,0 +1,1989 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <sal/config.h> + +#include <string_view> + +#include <config_features.h> +#include <config_wasm_strip.h> + +#include <stdlib.h> +#include <hintids.hxx> +#include <comphelper/string.hxx> +#include <o3tl/any.hxx> +#include <o3tl/string_view.hxx> +#include <officecfg/Office/Common.hxx> +#include <vcl/graph.hxx> +#include <vcl/inputctx.hxx> +#include <svl/eitem.hxx> +#include <unotools/configmgr.hxx> +#include <unotools/lingucfg.hxx> +#include <unotools/useroptions.hxx> +#include <sfx2/dispatch.hxx> +#include <sfx2/docfile.hxx> +#include <sfx2/objface.hxx> +#include <sfx2/request.hxx> +#include <svx/ruler.hxx> +#include <svx/srchdlg.hxx> +#include <svx/fmshell.hxx> +#include <svx/extrusionbar.hxx> +#include <svx/fontworkbar.hxx> +#include <svx/fmview.hxx> +#include <unotxvw.hxx> +#include <cmdid.h> +#include <svl/hint.hxx> +#include <swmodule.hxx> +#include <inputwin.hxx> +#include <uivwimp.hxx> +#include <edtwin.hxx> +#include <textsh.hxx> +#include <listsh.hxx> +#include <tabsh.hxx> +#include <grfsh.hxx> +#include <mediash.hxx> +#include <docsh.hxx> +#include <frmsh.hxx> +#include <olesh.hxx> +#include <drawsh.hxx> +#include <drawbase.hxx> +#include <drformsh.hxx> +#include <drwtxtsh.hxx> +#include <beziersh.hxx> +#include <navsh.hxx> +#include <globdoc.hxx> +#include <scroll.hxx> +#include <gloshdl.hxx> +#include <usrpref.hxx> +#include <srcview.hxx> +#include <doc.hxx> +#include <IDocumentUndoRedo.hxx> +#include <IDocumentSettingAccess.hxx> +#include <IDocumentDrawModelAccess.hxx> +#include <DocumentFieldsManager.hxx> +#include <IDocumentState.hxx> +#include <IDocumentLayoutAccess.hxx> +#include <drawdoc.hxx> +#include <wdocsh.hxx> +#include <wrtsh.hxx> +#include <barcfg.hxx> +#include <pview.hxx> +#include <swdtflvr.hxx> +#include <prtopt.hxx> +#include <com/sun/star/frame/FrameSearchFlag.hpp> +#include <com/sun/star/frame/XLayoutManager.hpp> +#include <com/sun/star/scanner/ScannerContext.hpp> +#include <com/sun/star/scanner/XScannerManager2.hpp> +#include <com/sun/star/lang/XMultiServiceFactory.hpp> +#include <com/sun/star/sdb/XDatabaseContext.hpp> +#include <com/sun/star/sdb/DatabaseContext.hpp> +#include <toolkit/helper/vclunohelper.hxx> +#include <sal/log.hxx> + +#include <formatclipboard.hxx> +#include <PostItMgr.hxx> +#include <annotsh.hxx> +#include <swruler.hxx> + +#include <com/sun/star/document/XDocumentProperties.hpp> +#include <com/sun/star/document/XDocumentPropertiesSupplier.hpp> + +#include <comphelper/propertyvalue.hxx> +#include <sfx2/lokhelper.hxx> +#include <LibreOfficeKit/LibreOfficeKitEnums.h> +#include <svtools/embedhlp.hxx> +#include <tools/UnitConversion.hxx> + +using namespace ::com::sun::star; +using namespace ::com::sun::star::uno; +using namespace ::com::sun::star::lang; +using namespace ::com::sun::star::scanner; +using namespace ::com::sun::star::sdb; +using namespace ::com::sun::star::sdbc; + +#define SWVIEWFLAGS SfxViewShellFlags::HAS_PRINTOPTIONS + +// Statics. OMG. + +bool bDocSzUpdated = true; + +SvxSearchItem* SwView::s_pSrchItem = nullptr; + +bool SwView::s_bExtra = false; +bool SwView::s_bFound = false; +bool SwView::s_bJustOpened = false; + +std::unique_ptr<SearchAttrItemList> SwView::s_xSearchList; +std::unique_ptr<SearchAttrItemList> SwView::s_xReplaceList; + +SfxDispatcher &SwView::GetDispatcher() +{ + return *GetViewFrame()->GetDispatcher(); +} + +void SwView::ImpSetVerb( SelectionType nSelType ) +{ + bool bResetVerbs = m_bVerbsActive; + if ( !GetViewFrame()->GetFrame().IsInPlace() && + (SelectionType::Ole|SelectionType::Graphic) & nSelType ) + { + FlyProtectFlags eProtectFlags = m_pWrtShell->IsSelObjProtected(FlyProtectFlags::Content); + if (eProtectFlags == FlyProtectFlags::NONE || nSelType & SelectionType::Ole) + { + if ( nSelType & SelectionType::Ole ) + { + SetVerbs( GetWrtShell().GetOLEObject()->getSupportedVerbs() ); + m_bVerbsActive = true; + bResetVerbs = false; + } + } + } + if ( bResetVerbs ) + { + SetVerbs( Sequence< embed::VerbDescriptor >() ); + m_bVerbsActive = false; + } +} + +// Called by the SwEditWin when it gets the focus. + +void SwView::GotFocus() const +{ + // if we got the focus, and the form shell *is* on the top of the dispatcher + // stack, then we need to rebuild the stack (the form shell doesn't belong to + // the top then) + const SfxDispatcher& rDispatcher = const_cast< SwView* >( this )->GetDispatcher(); + SfxShell* pTopShell = rDispatcher.GetShell( 0 ); + FmFormShell* pAsFormShell = dynamic_cast<FmFormShell*>( pTopShell ); + if ( pAsFormShell ) + { + pAsFormShell->ForgetActiveControl(); + const_cast< SwView* >( this )->AttrChangedNotify(nullptr); + } + else if ( m_pPostItMgr ) + { + SwAnnotationShell* pAsAnnotationShell = dynamic_cast<SwAnnotationShell*>( pTopShell ); + if ( pAsAnnotationShell ) + { + m_pPostItMgr->SetActiveSidebarWin(nullptr); + const_cast< SwView* >( this )->AttrChangedNotify(nullptr); + } + } + if( GetWrtShellPtr() ) + { + SwWrtShell& rWrtShell = GetWrtShell(); + rWrtShell.GetDoc()->getIDocumentLayoutAccess().SetCurrentViewShell( GetWrtShellPtr() ); + rWrtShell.GetDoc()->getIDocumentSettingAccess().set( DocumentSettingId::BROWSE_MODE, + rWrtShell.GetViewOptions()->getBrowseMode() ); + } +} + +// called by the FormShell when a form control is focused. This is +// a request to put the form shell on the top of the dispatcher stack + +IMPL_LINK_NOARG(SwView, FormControlActivated, LinkParamNone*, void) +{ + // if a form control has been activated, and the form shell is not on the top + // of the dispatcher stack, then we need to activate it + const SfxDispatcher& rDispatcher = GetDispatcher(); + const SfxShell* pTopShell = rDispatcher.GetShell( 0 ); + const FmFormShell* pAsFormShell = dynamic_cast<const FmFormShell*>( pTopShell ); + if ( !pAsFormShell ) + { + // if we're editing text currently, cancel this + SdrView *pSdrView = m_pWrtShell ? m_pWrtShell->GetDrawView() : nullptr; + if ( pSdrView && pSdrView->IsTextEdit() ) + pSdrView->SdrEndTextEdit( true ); + + AttrChangedNotify(nullptr); + } +} + +namespace +{ +uno::Reference<frame::XLayoutManager> getLayoutManager(const SfxViewFrame& rViewFrame) +{ + uno::Reference<frame::XLayoutManager> xLayoutManager; + uno::Reference<beans::XPropertySet> xPropSet(rViewFrame.GetFrame().GetFrameInterface(), + uno::UNO_QUERY); + if (xPropSet.is()) + { + try + { + xLayoutManager.set(xPropSet->getPropertyValue("LayoutManager"), uno::UNO_QUERY); + } + catch (const Exception& e) + { + SAL_WARN("sw.ui", "Failure getting layout manager: " + e.Message); + } + } + return xLayoutManager; +} +} + +void SwView::ShowUIElement(const OUString& sElementURL) const +{ + if (auto xLayoutManager = getLayoutManager(*GetViewFrame())) + { + if (!xLayoutManager->getElement(sElementURL).is()) + { + xLayoutManager->createElement(sElementURL); + xLayoutManager->showElement(sElementURL); + } + } +} + +void SwView::SelectShell() +{ + // Attention: Maintain the SelectShell for the WebView additionally + + if(m_bInDtor) + return; + + // Decision if the UpdateTable has to be called + bool bUpdateTable = false; + const SwFrameFormat* pCurTableFormat = m_pWrtShell->GetTableFormat(); + if(pCurTableFormat && pCurTableFormat != m_pLastTableFormat) + { + bUpdateTable = true; // can only be executed later + } + m_pLastTableFormat = pCurTableFormat; + + //SEL_TBL and SEL_TBL_CELLS can be ORed! + SelectionType nNewSelectionType = m_pWrtShell->GetSelectionType() + & ~SelectionType::TableCell; + + // Determine if a different fly frame was selected. + bool bUpdateFly = false; + const SwFrameFormat* pCurFlyFormat = nullptr; + if (m_nSelectionType & SelectionType::Ole || m_nSelectionType & SelectionType::Graphic) + { + pCurFlyFormat = m_pWrtShell->GetFlyFrameFormat(); + } + if (pCurFlyFormat && pCurFlyFormat != m_pLastFlyFormat) + { + bUpdateFly = true; + } + m_pLastFlyFormat = pCurFlyFormat; + + if ( m_pFormShell && m_pFormShell->IsActiveControl() ) + nNewSelectionType |= SelectionType::FormControl; + + if ( nNewSelectionType == m_nSelectionType ) + { + GetViewFrame()->GetBindings().InvalidateAll( false ); + if ( m_nSelectionType & SelectionType::Ole || + m_nSelectionType & SelectionType::Graphic ) + // For graphs and OLE the verb can be modified of course! + ImpSetVerb( nNewSelectionType ); + + if (bUpdateFly) + { + SfxViewFrame* pViewFrame = GetViewFrame(); + if (pViewFrame) + { + uno::Reference<frame::XFrame> xFrame = pViewFrame->GetFrame().GetFrameInterface(); + if (xFrame.is()) + { + // Invalidate cached dispatch objects. + xFrame->contextChanged(); + } + } + } + } + else + { + + SfxDispatcher &rDispatcher = GetDispatcher(); + SwToolbarConfigItem *pBarCfg = SW_MOD()->GetToolbarConfig(); + + if ( m_pShell ) + { + rDispatcher.Flush(); // Really erase all cached shells + //Remember to the old selection which toolbar was visible + ToolbarId eId = rDispatcher.GetObjectBarId(SFX_OBJECTBAR_OBJECT); + if (eId != ToolbarId::None) + pBarCfg->SetTopToolbar(m_nSelectionType, eId); + + for ( sal_uInt16 i = 0; true; ++i ) + { + SfxShell *pSfxShell = rDispatcher.GetShell( i ); + if ( dynamic_cast< const SwBaseShell *>( pSfxShell ) != nullptr + || dynamic_cast< const SwDrawTextShell *>( pSfxShell ) != nullptr + || dynamic_cast< const svx::ExtrusionBar*>( pSfxShell ) != nullptr + || dynamic_cast< const svx::FontworkBar*>( pSfxShell ) != nullptr + || dynamic_cast< const SwAnnotationShell *>( pSfxShell ) != nullptr + ) + { + rDispatcher.Pop( *pSfxShell, SfxDispatcherPopFlags::POP_DELETE ); + } + else if ( dynamic_cast< const FmFormShell *>( pSfxShell ) != nullptr ) + { + rDispatcher.Pop( *pSfxShell ); + } + else + break; + } + } + + bool bInitFormShell = false; + if (!m_pFormShell) + { + bInitFormShell = true; + m_pFormShell = new FmFormShell( this ); + m_pFormShell->SetControlActivationHandler( LINK( this, SwView, FormControlActivated ) ); + StartListening(*m_pFormShell); + } + + bool bSetExtInpCntxt = false; + m_nSelectionType = nNewSelectionType; + ShellMode eShellMode; + + if ( !( m_nSelectionType & SelectionType::FormControl ) ) + rDispatcher.Push( *m_pFormShell ); + + m_pShell = new SwNavigationShell( *this ); + rDispatcher.Push( *m_pShell ); + + if ( m_nSelectionType & SelectionType::Ole ) + { + eShellMode = ShellMode::Object; + m_pShell = new SwOleShell( *this ); + rDispatcher.Push( *m_pShell ); + } + else if ( m_nSelectionType & SelectionType::Frame + || m_nSelectionType & SelectionType::Graphic) + { + eShellMode = ShellMode::Frame; + m_pShell = new SwFrameShell( *this ); + rDispatcher.Push( *m_pShell ); + if(m_nSelectionType & SelectionType::Graphic ) + { + eShellMode = ShellMode::Graphic; + m_pShell = new SwGrfShell( *this ); + rDispatcher.Push( *m_pShell ); + } + } + else if ( m_nSelectionType & SelectionType::DrawObject ) + { + eShellMode = ShellMode::Draw; + m_pShell = new SwDrawShell( *this ); + rDispatcher.Push( *m_pShell ); + + if ( m_nSelectionType & SelectionType::Ornament ) + { + eShellMode = ShellMode::Bezier; + m_pShell = new SwBezierShell( *this ); + rDispatcher.Push( *m_pShell ); + } +#if HAVE_FEATURE_AVMEDIA + else if( m_nSelectionType & SelectionType::Media ) + { + eShellMode = ShellMode::Media; + m_pShell = new SwMediaShell( *this ); + rDispatcher.Push( *m_pShell ); + } +#endif + if (m_nSelectionType & SelectionType::ExtrudedCustomShape) + { + eShellMode = ShellMode::ExtrudedCustomShape; + m_pShell = new svx::ExtrusionBar(this); + rDispatcher.Push( *m_pShell ); + } + if (m_nSelectionType & SelectionType::FontWork) + { + eShellMode = ShellMode::FontWork; + m_pShell = new svx::FontworkBar(this); + rDispatcher.Push( *m_pShell ); + } + } + else if ( m_nSelectionType & SelectionType::DbForm ) + { + eShellMode = ShellMode::DrawForm; + m_pShell = new SwDrawFormShell( *this ); + + rDispatcher.Push( *m_pShell ); + } + else if ( m_nSelectionType & SelectionType::DrawObjectEditMode ) + { + bSetExtInpCntxt = true; + eShellMode = ShellMode::DrawText; + rDispatcher.Push( *(new SwBaseShell( *this )) ); + m_pShell = new SwDrawTextShell( *this ); + rDispatcher.Push( *m_pShell ); + } + else if ( m_nSelectionType & SelectionType::PostIt ) + { + eShellMode = ShellMode::PostIt; + m_pShell = new SwAnnotationShell( *this ); + rDispatcher.Push( *m_pShell ); + } + else + { + bSetExtInpCntxt = true; + eShellMode = ShellMode::Text; + if ( m_nSelectionType & SelectionType::NumberList ) + { + eShellMode = ShellMode::ListText; + m_pShell = new SwListShell( *this ); + rDispatcher.Push( *m_pShell ); + } + m_pShell = new SwTextShell(*this); + rDispatcher.Push( *m_pShell ); + if ( m_nSelectionType & SelectionType::Table ) + { + eShellMode = eShellMode == ShellMode::ListText ? ShellMode::TableListText + : ShellMode::TableText; + m_pShell = new SwTableShell( *this ); + rDispatcher.Push( *m_pShell ); + } + } + + if ( m_nSelectionType & SelectionType::FormControl ) + rDispatcher.Push( *m_pFormShell ); + + m_pViewImpl->SetShellMode(eShellMode); + ImpSetVerb( m_nSelectionType ); + + if( !GetDocShell()->IsReadOnly() ) + { + if( bSetExtInpCntxt && GetWrtShell().HasReadonlySel() ) + bSetExtInpCntxt = false; + + InputContext aCntxt( GetEditWin().GetInputContext() ); + aCntxt.SetOptions( bSetExtInpCntxt + ? (aCntxt.GetOptions() | + ( InputContextFlags::Text | + InputContextFlags::ExtText )) + : (aCntxt.GetOptions() & ~ + InputContextFlags( InputContextFlags::Text | + InputContextFlags::ExtText )) ); + GetEditWin().SetInputContext( aCntxt ); + } + + // Show Mail Merge toolbar initially for documents with Database fields + if (!m_bInitOnceCompleted && GetWrtShell().IsAnyDatabaseFieldInDoc()) + ShowUIElement("private:resource/toolbar/mailmerge"); + + // Activate the toolbar to the new selection which also was active last time. + // Before a flush () must be, but does not affect the UI according to MBA and + // is not a performance problem. + // TODO/LATER: maybe now the Flush() command is superfluous?! + rDispatcher.Flush(); + + Point aPnt = GetEditWin().OutputToScreenPixel(GetEditWin().GetPointerPosPixel()); + aPnt = GetEditWin().PixelToLogic(aPnt); + GetEditWin().UpdatePointer(aPnt); + + SdrView* pDView = GetWrtShell().GetDrawView(); + if ( bInitFormShell && pDView ) + m_pFormShell->SetView(dynamic_cast<FmFormView*>( pDView) ); + + } + // Opportune time for the communication with OLE objects? + if ( GetDocShell()->GetDoc()->IsOLEPrtNotifyPending() ) + GetDocShell()->GetDoc()->PrtOLENotify( false ); + + // now the table-update + if(bUpdateTable) + m_pWrtShell->UpdateTable(); + + GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged(); + + m_bInitOnceCompleted = true; +} + +// Interaction: AttrChangedNotify() and TimeoutHdl. +// No Update if actions are still open, since the cursor on the core side +// can be somewhere in no man's land. +// But since we can no longer supply status and we want instead lock +// the dispatcher. + +extern "C" +{ + static int lcl_CmpIds( const void *pFirst, const void *pSecond) + { + return *static_cast<sal_uInt16 const *>(pFirst) - *static_cast<sal_uInt16 const *>(pSecond); + } +} + +IMPL_LINK_NOARG(SwView, AttrChangedNotify, LinkParamNone*, void) +{ + if ( GetEditWin().IsChainMode() ) + GetEditWin().SetChainMode( false ); + + if (!m_pWrtShell || !GetDocShell()) + { + return; + } + + //Opt: Not if PaintLocked. During unlock a notify will be once more triggered. + if( !m_pWrtShell->IsPaintLocked() && !g_bNoInterrupt && + GetDocShell()->IsReadOnly() ) + CheckReadonlyState(); + + if( !m_pWrtShell->IsPaintLocked() && !g_bNoInterrupt ) + CheckReadonlySelection(); + + if( !m_bAttrChgNotified ) + { + if (m_pWrtShell->ActionPend() || g_bNoInterrupt || + GetDispatcher().IsLocked() || //do not confuse the SFX + GetViewFrame()->GetBindings().IsInUpdate() )//do not confuse the SFX + { + m_bAttrChgNotified = true; + m_aTimer.Start(); + + const SfxBoolItem *pItem = + GetObjectShell()->GetMedium()->GetItemSet()-> + GetItemIfSet( SID_HIDDEN, false ); + if ( !pItem || !pItem->GetValue() ) + { + GetViewFrame()->GetBindings().ENTERREGISTRATIONS(); + m_bAttrChgNotifiedWithRegistrations = true; + } + + } + else + SelectShell(); + + } + + // change ui if cursor is at a SwPostItField + if (m_pPostItMgr) + { + // only perform the code that is needed to determine, if at the + // actual cursor position is a post-it field + m_pPostItMgr->SetShadowState( m_pWrtShell->GetPostItFieldAtCursor() ); + } +} + +IMPL_LINK_NOARG(SwView, TimeoutHdl, Timer *, void) +{ + if (m_pWrtShell->ActionPend() || g_bNoInterrupt) + { + m_aTimer.Start(); + return; + } + + if ( m_bAttrChgNotifiedWithRegistrations ) + { + GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); + m_bAttrChgNotifiedWithRegistrations = false; + } + + CheckReadonlyState(); + CheckReadonlySelection(); + + bool bOldUndo = m_pWrtShell->DoesUndo(); + m_pWrtShell->DoUndo( false ); + SelectShell(); + m_pWrtShell->DoUndo( bOldUndo ); + m_bAttrChgNotified = false; + GetViewImpl()->GetUNOObject_Impl()->NotifySelChanged(); +} + +void SwView::CheckReadonlyState() +{ + SfxDispatcher &rDis = GetDispatcher(); + // To be able to recognize if it is already disabled! + SfxItemState eStateRO, eStateProtAll; + const SfxPoolItem *pItem; + // Query the status from a slot which is only known to us. + // Otherwise the slot is known from other; like the BasicIde + eStateRO = rDis.QueryState( FN_INSERT_BOOKMARK, pItem ); + eStateProtAll = rDis.QueryState( FN_EDIT_REGION, pItem ); + bool bChgd = false; + + if ( !m_pWrtShell->IsCursorReadonly() ) + { + static sal_uInt16 aROIds[] = + { + SID_DELETE, FN_BACKSPACE, FN_SHIFT_BACKSPACE, + SID_UNDO, + SID_REDO, SID_REPEAT, SID_PASTE, + SID_PASTE_UNFORMATTED, FN_PASTE_NESTED_TABLE, FN_TABLE_PASTE_ROW_BEFORE, + FN_TABLE_PASTE_COL_BEFORE, SID_PASTE_SPECIAL, SID_SBA_BRW_INSERT, + SID_BACKGROUND_COLOR, FN_INSERT_BOOKMARK, SID_CHARMAP_CONTROL, + SID_CHARMAP, SID_EMOJI_CONTROL, FN_INSERT_SOFT_HYPHEN, + FN_INSERT_HARDHYPHEN, FN_INSERT_HARD_SPACE, FN_INSERT_NNBSP, + FN_INSERT_BREAK, FN_INSERT_LINEBREAK, FN_INSERT_COLUMN_BREAK, + FN_INSERT_BREAK_DLG, FN_INSERT_CONTENT_CONTROL, FN_INSERT_CHECKBOX_CONTENT_CONTROL, + FN_INSERT_DROPDOWN_CONTENT_CONTROL, FN_INSERT_PICTURE_CONTENT_CONTROL, + FN_INSERT_DATE_CONTENT_CONTROL, + FN_DELETE_SENT, FN_DELETE_BACK_SENT, FN_DELETE_WORD, + FN_DELETE_BACK_WORD, FN_DELETE_LINE, FN_DELETE_BACK_LINE, + FN_DELETE_PARA, FN_DELETE_BACK_PARA, FN_DELETE_WHOLE_LINE, + FN_CALCULATE, FN_FORMAT_RESET, + FN_POSTIT, FN_JAVAEDIT, SID_ATTR_PARA_ADJUST_LEFT, + SID_ATTR_PARA_ADJUST_RIGHT, SID_ATTR_PARA_ADJUST_CENTER,SID_ATTR_PARA_ADJUST_BLOCK, + SID_ATTR_PARA_LINESPACE_10, SID_ATTR_PARA_LINESPACE_15, SID_ATTR_PARA_LINESPACE_20, + SID_ATTR_CHAR_FONT, SID_ATTR_CHAR_FONTHEIGHT, SID_ATTR_CHAR_COLOR_BACKGROUND, + SID_ATTR_CHAR_COLOR_BACKGROUND_EXT, SID_ATTR_CHAR_COLOR_EXT, + SID_ATTR_CHAR_COLOR, SID_ATTR_CHAR_WEIGHT, SID_ATTR_CHAR_POSTURE, + SID_ATTR_CHAR_OVERLINE, + SID_ATTR_CHAR_UNDERLINE, SID_ATTR_FLASH, SID_ATTR_CHAR_STRIKEOUT, + SID_ULINE_VAL_SINGLE, SID_ULINE_VAL_DOUBLE, SID_ULINE_VAL_DOTTED, + SID_ATTR_CHAR_CONTOUR, SID_ATTR_CHAR_SHADOWED, + SID_ATTR_CHAR_AUTOKERN, SID_ATTR_CHAR_ESCAPEMENT, FN_SET_SUPER_SCRIPT, + FN_SET_SUB_SCRIPT, SID_ATTR_CHAR_CASEMAP, SID_ATTR_CHAR_LANGUAGE, + SID_ATTR_CHAR_KERNING, SID_CHAR_DLG, SID_ATTR_CHAR_WORDLINEMODE, + FN_GROW_FONT_SIZE, FN_SHRINK_FONT_SIZE, FN_TXTATR_INET, + FN_FORMAT_DROPCAPS, SID_ATTR_PARA_ADJUST, SID_ATTR_PARA_LINESPACE, + SID_ATTR_PARA_SPLIT, SID_ATTR_PARA_KEEP, SID_ATTR_PARA_WIDOWS, + SID_ATTR_PARA_ORPHANS, + SID_ATTR_PARA_MODEL, SID_PARA_DLG, + FN_SELECT_PARA, SID_DEC_INDENT, + SID_INC_INDENT + }; + static bool bFirst = true; + if ( bFirst ) + { + qsort( static_cast<void*>(aROIds), SAL_N_ELEMENTS(aROIds), sizeof(sal_uInt16), lcl_CmpIds ); + bFirst = false; + } + if ( SfxItemState::DISABLED == eStateRO ) + { + rDis.SetSlotFilter( SfxSlotFilterState::ENABLED_READONLY, aROIds ); + bChgd = true; + } + } + else if( m_pWrtShell->IsAllProtect() ) + { + if ( SfxItemState::DISABLED == eStateProtAll ) + { + static sal_uInt16 aAllProtIds[] = { SID_SAVEDOC, FN_EDIT_REGION }; + static bool bAllProtFirst = true; + if ( bAllProtFirst ) + { + qsort( static_cast<void*>(aAllProtIds), SAL_N_ELEMENTS(aAllProtIds), sizeof(sal_uInt16), lcl_CmpIds ); + bAllProtFirst = false; + } + rDis.SetSlotFilter( SfxSlotFilterState::ENABLED_READONLY, aAllProtIds ); + bChgd = true; + } + } + else if ( SfxItemState::DISABLED != eStateRO || + SfxItemState::DISABLED != eStateProtAll ) + { + bChgd = true; + rDis.SetSlotFilter(); + } + if ( bChgd ) + GetViewFrame()->GetBindings().InvalidateAll(true); +} + +void SwView::CheckReadonlySelection() +{ + SfxDisableFlags nDisableFlags = SfxDisableFlags::NONE; + SfxDispatcher &rDis = GetDispatcher(); + + if( m_pWrtShell->HasReadonlySel() && + ( !m_pWrtShell->GetDrawView() || + !m_pWrtShell->GetDrawView()->GetMarkedObjectList().GetMarkCount() )) + nDisableFlags |= SfxDisableFlags::SwOnProtectedCursor; + + if( (SfxDisableFlags::SwOnProtectedCursor & nDisableFlags ) != + (SfxDisableFlags::SwOnProtectedCursor & rDis.GetDisableFlags() ) ) + { + // Additionally move at the Window the InputContext, so that + // in japanese / chinese versions the external input will be + // turned on or off. This but only if the correct shell is on + // the stack. + switch( m_pViewImpl->GetShellMode() ) + { + case ShellMode::Text: + case ShellMode::ListText: + case ShellMode::TableText: + case ShellMode::TableListText: + { +// Temporary solution!!! Should set the font of the current insertion point +// at each cursor movement, so outside of this "if". But TH does not +// evaluates the font at this time and the "purchase" appears to me +// as too expensive. +// Moreover, we don't have a font, but only attributes from which the +// text formatting and the correct font will be build together. + + InputContext aCntxt( GetEditWin().GetInputContext() ); + aCntxt.SetOptions( SfxDisableFlags::SwOnProtectedCursor & nDisableFlags + ? (aCntxt.GetOptions() & ~ + InputContextFlags( InputContextFlags::Text | + InputContextFlags::ExtText )) + : (aCntxt.GetOptions() | + ( InputContextFlags::Text | + InputContextFlags::ExtText )) ); + GetEditWin().SetInputContext( aCntxt ); + } + break; + default: + ; + } + + } + + if( nDisableFlags != rDis.GetDisableFlags() ) + { + rDis.SetDisableFlags( nDisableFlags ); + GetViewFrame()->GetBindings().InvalidateAll( true ); + } +} + +SwView::SwView( SfxViewFrame *_pFrame, SfxViewShell* pOldSh ) + : SfxViewShell( _pFrame, SWVIEWFLAGS ), + m_aTimer( "sw::SwView m_aTimer" ), + m_nNewPage(USHRT_MAX), + m_nOldPageNum(0), + m_pNumRuleNodeFromDoc(nullptr), + m_pEditWin( VclPtr<SwEditWin>::Create( &_pFrame->GetWindow(), *this ) ), + m_pShell(nullptr), + m_pFormShell(nullptr), + m_pHScrollbar(nullptr), + m_pVScrollbar(nullptr), + m_pScrollFill(VclPtr<ScrollBarBox>::Create( &_pFrame->GetWindow(), WB_SIZEABLE )), + m_pVRuler(VclPtr<SvxRuler>::Create(&GetViewFrame()->GetWindow(), m_pEditWin, + SvxRulerSupportFlags::TABS | SvxRulerSupportFlags::PARAGRAPH_MARGINS_VERTICAL| + SvxRulerSupportFlags::BORDERS | SvxRulerSupportFlags::REDUCED_METRIC, + GetViewFrame()->GetBindings(), + WB_VSCROLL | WB_EXTRAFIELD | WB_BORDER )), + m_pLastTableFormat(nullptr), + m_pLastFlyFormat(nullptr), + m_pFormatClipboard(new SwFormatClipboard()), + m_nSelectionType( SelectionType::All ), + m_nPageCnt(0), + m_nDrawSfxId( USHRT_MAX ), + m_nFormSfxId( USHRT_MAX ), + m_eFormObjKind(SdrObjKind::NONE), + m_nLastPasteDestination( static_cast<SotExchangeDest>(0xFFFF) ), + m_nLeftBorderDistance( 0 ), + m_nRightBorderDistance( 0 ), + m_eLastSearchCommand( static_cast<SvxSearchCmd>(0xFFFF) ), + m_bWheelScrollInProgress(false), + m_bCenterCursor(false), + m_bTopCursor(false), + m_bTabColFromDoc(false), + m_bTabRowFromDoc(false), + m_bSetTabColFromDoc(false), + m_bSetTabRowFromDoc(false), + m_bAttrChgNotified(false), + m_bAttrChgNotifiedWithRegistrations(false), + m_bVerbsActive(false), + m_bDrawRotate(false), + m_bDrawSelMode(true), + m_bShowAtResize(true), + m_bInOuterResizePixel(false), + m_bInInnerResizePixel(false), + m_bPasteState(false), + m_bPasteSpecialState(false), + m_bInMailMerge(false), + m_bInDtor(false), + m_bOldShellWasPagePreview(false), + m_bIsPreviewDoubleClick(false), + m_bMakeSelectionVisible(false), + m_bForceChangesToolbar(true), + m_nLOKPageUpDownOffset(0) +{ + static bool bRequestDoubleBuffering = getenv("VCL_DOUBLEBUFFERING_ENABLE"); + if (bRequestDoubleBuffering) + m_pEditWin->RequestDoubleBuffering(true); + + // According to discussion with MBA and further + // investigations, no old SfxViewShell will be set as parameter <pOldSh>, + // if function "New Window" is performed to open an additional view beside + // an already existing one. + // If the view is switch from one to another, the 'old' view is given by + // parameter <pOldSh>. + + bDocSzUpdated = true; + + CreateScrollbar( true ); + CreateScrollbar( false ); + + m_pViewImpl.reset(new SwView_Impl(this)); + SetName("View"); + SetWindow( m_pEditWin ); + + m_aTimer.SetTimeout( 120 ); + + SwDocShell& rDocSh = dynamic_cast<SwDocShell&>(*_pFrame->GetObjectShell()); + bool bOldModifyFlag = rDocSh.IsEnableSetModified(); + if (bOldModifyFlag) + rDocSh.EnableSetModified( false ); + // HACK: SwDocShell has some cached font info, VCL informs about font updates, + // but loading of docs with embedded fonts happens after SwDocShell is created + // but before SwEditWin (which handles the VCL event) is created. So update + // manually. + if (rDocSh.GetDoc()->getIDocumentSettingAccess().get( DocumentSettingId::EMBED_FONTS )) + rDocSh.UpdateFontList(); + bool bWebDShell = dynamic_cast<const SwWebDocShell*>(&rDocSh) != nullptr; + + const SwMasterUsrPref *pUsrPref = SW_MOD()->GetUsrPref(bWebDShell); + SwViewOption aUsrPref( *pUsrPref); + + //! get lingu options without loading lingu DLL + SvtLinguOptions aLinguOpt; + SvtLinguConfig().GetOptions( aLinguOpt ); + aUsrPref.SetOnlineSpell( aLinguOpt.bIsSpellAuto ); + + bool bOldShellWasSrcView = false; + + // determine if there is an existing view for + // document + SfxViewShell* pExistingSh = nullptr; + if ( pOldSh ) + { + pExistingSh = pOldSh; + // determine type of existing view + if (SwPagePreview* pPagePreview = dynamic_cast<SwPagePreview *>(pExistingSh)) + { + m_sSwViewData = pPagePreview->GetPrevSwViewData(); + m_sNewCursorPos = pPagePreview->GetNewCursorPos(); + m_nNewPage = pPagePreview->GetNewPage(); + m_bOldShellWasPagePreview = true; + m_bIsPreviewDoubleClick = !m_sNewCursorPos.isEmpty() || m_nNewPage != USHRT_MAX; + } + else if (dynamic_cast<const SwSrcView *>(pExistingSh) != nullptr) + bOldShellWasSrcView = true; + } + + SAL_INFO( "sw.ui", "before create WrtShell" ); + if (SwView *pView = dynamic_cast<SwView*>(pExistingSh)) + { + m_pWrtShell.reset(new SwWrtShell(*pView->m_pWrtShell, m_pEditWin, *this)); + } + else if (SwWrtShell *pWrtShell = dynamic_cast<SwWrtShell*>(rDocSh.GetDoc()->getIDocumentLayoutAccess().GetCurrentViewShell())) + { + m_pWrtShell.reset(new SwWrtShell(*pWrtShell, m_pEditWin, *this)); + } + else + { + SwDoc& rDoc = *rDocSh.GetDoc(); + + if( !bOldShellWasSrcView && bWebDShell && !m_bOldShellWasPagePreview ) + aUsrPref.setBrowseMode( true ); + else + aUsrPref.setBrowseMode( rDoc.getIDocumentSettingAccess().get(DocumentSettingId::BROWSE_MODE) ); + + //For the BrowseMode we do not assume a factor. + if( aUsrPref.getBrowseMode() && aUsrPref.GetZoomType() != SvxZoomType::PERCENT ) + { + aUsrPref.SetZoomType( SvxZoomType::PERCENT ); + aUsrPref.SetZoom( 100 ); + } + if (rDocSh.IsPreview()) + { + aUsrPref.SetZoomType( SvxZoomType::WHOLEPAGE ); + aUsrPref.SetViewLayoutBookMode( false ); + aUsrPref.SetViewLayoutColumns( 1 ); + } + m_pWrtShell.reset(new SwWrtShell(rDoc, m_pEditWin, *this, &aUsrPref)); + // creating an SwView from a SwPagePreview needs to + // add the SwViewShell to the ring of the other SwViewShell(s) + if(m_bOldShellWasPagePreview) + { + SwViewShell& rPreviewViewShell = *static_cast<SwPagePreview*>(pExistingSh)->GetViewShell(); + m_pWrtShell->MoveTo(&rPreviewViewShell); + // to update the field command et.al. if necessary + const SwViewOption* pPreviewOpt = rPreviewViewShell.GetViewOptions(); + if( pPreviewOpt->IsFieldName() != aUsrPref.IsFieldName() || + pPreviewOpt->IsShowHiddenField() != aUsrPref.IsShowHiddenField() || + pPreviewOpt->IsShowHiddenPara() != aUsrPref.IsShowHiddenPara() || + pPreviewOpt->IsShowHiddenChar() != aUsrPref.IsShowHiddenChar() ) + rPreviewViewShell.ApplyViewOptions(aUsrPref); + // reset design mode at draw view for form + // shell, if needed. + if ( static_cast<SwPagePreview*>(pExistingSh)->ResetFormDesignMode() && + m_pWrtShell->HasDrawView() ) + { + SdrView* pDrawView = m_pWrtShell->GetDrawView(); + pDrawView->SetDesignMode( static_cast<SwPagePreview*>(pExistingSh)->FormDesignModeToReset() ); + } + } + } + SAL_INFO( "sw.ui", "after create WrtShell" ); + m_pHRuler = VclPtr<SwCommentRuler>::Create(m_pWrtShell.get(), &GetViewFrame()->GetWindow(), m_pEditWin, + SvxRulerSupportFlags::TABS | + SvxRulerSupportFlags::PARAGRAPH_MARGINS | + SvxRulerSupportFlags::BORDERS | + SvxRulerSupportFlags::NEGATIVE_MARGINS| + SvxRulerSupportFlags::REDUCED_METRIC, + GetViewFrame()->GetBindings(), + WB_STDRULER | WB_EXTRAFIELD | WB_BORDER); + + // assure that modified state of document + // isn't reset, if document is already modified. + const bool bIsDocModified = m_pWrtShell->GetDoc()->getIDocumentState().IsModified(); + + // Thus among other things, the HRuler is not displayed in the read-only case. + aUsrPref.SetReadonly( m_pWrtShell->GetViewOptions()->IsReadonly() ); + + // no margin for OLE! + Size aBrwsBorder; + if( SfxObjectCreateMode::EMBEDDED != rDocSh.GetCreateMode() ) + aBrwsBorder = GetMargin(); + + m_pWrtShell->SetBrowseBorder( aBrwsBorder ); + + // In CTOR no shell changes may take place, which must be temporarily stored + // with the timer. Otherwise, the SFX removes them from the stack! + bool bOld = g_bNoInterrupt; + g_bNoInterrupt = true; + + m_pHRuler->SetActive(); + m_pVRuler->SetActive(); + + SfxViewFrame* pViewFrame = GetViewFrame(); + + StartListening(*pViewFrame, DuplicateHandling::Prevent); + StartListening(rDocSh, DuplicateHandling::Prevent); + + // Set Zoom-factor from HRuler + Fraction aZoomFract( aUsrPref.GetZoom(), 100 ); + m_pHRuler->SetZoom( aZoomFract ); + m_pVRuler->SetZoom( aZoomFract ); + m_pHRuler->SetDoubleClickHdl(LINK( this, SwView, ExecRulerClick )); + FieldUnit eMetric = pUsrPref->GetHScrollMetric(); + m_pHRuler->SetUnit( eMetric ); + + eMetric = pUsrPref->GetVScrollMetric(); + m_pVRuler->SetUnit( eMetric ); + + m_pHRuler->SetCharWidth( 371 ); // default character width + m_pVRuler->SetLineHeight( 551 ); // default line height + + // Set DocShell + m_xGlueDocShell.reset(new SwViewGlueDocShell(*this, rDocSh)); + m_pPostItMgr.reset(new SwPostItMgr(this)); + + // Check and process the DocSize. Via the handler, the shell could not + // be found, because the shell is not known in the SFX management + // within the CTOR phase. + DocSzChgd( m_pWrtShell->GetDocSize() ); + + // Set AttrChangedNotify link + m_pWrtShell->SetChgLnk(LINK(this, SwView, AttrChangedNotify)); + + if (rDocSh.GetCreateMode() == SfxObjectCreateMode::EMBEDDED && + !rDocSh.GetVisArea(ASPECT_CONTENT).IsEmpty()) + SetVisArea(rDocSh.GetVisArea(ASPECT_CONTENT),false); + + SAL_WARN_IF( + officecfg::Office::Common::Undo::Steps::get() <= 0, + "sw.ui", "/org.openoffice.Office.Common/Undo/Steps <= 0"); + if (!utl::ConfigManager::IsFuzzing() && 0 < officecfg::Office::Common::Undo::Steps::get()) + { + m_pWrtShell->DoUndo(); + } + + const bool bBrowse = m_pWrtShell->GetViewOptions()->getBrowseMode(); + // Disable "multiple window" + SetNewWindowAllowed(!bBrowse); + // End of disabled multiple window + + m_bVScrollbarEnabled = aUsrPref.IsViewVScrollBar(); + m_bHScrollbarEnabled = aUsrPref.IsViewHScrollBar(); + m_pHScrollbar->SetAuto(bBrowse); + if( aUsrPref.IsViewHRuler() ) + CreateTab(); + if( aUsrPref.IsViewVRuler() ) + CreateVRuler(); + + m_pWrtShell->SetUIOptions( aUsrPref ); + m_pWrtShell->SetReadOnlyAvailable( aUsrPref.IsCursorInProtectedArea() ); +#if !ENABLE_WASM_STRIP_ACCESSIBILITY + m_pWrtShell->ApplyAccessibilityOptions(SW_MOD()->GetAccessibilityOptions()); +#endif + + if( m_pWrtShell->GetDoc()->getIDocumentState().IsUpdateExpField() ) + { + if (m_pWrtShell->GetDoc()->GetDocumentFieldsManager().containsUpdatableFields()) + { + CurrShell aCurr(m_pWrtShell.get()); + m_pWrtShell->StartAction(); + m_pWrtShell->CalcLayout(); + m_pWrtShell->GetDoc()->getIDocumentFieldsAccess().UpdateFields(false); + m_pWrtShell->EndAction(); + } + m_pWrtShell->GetDoc()->getIDocumentState().SetUpdateExpFieldStat( false ); + } + + // Update all tables if necessary: + if( m_pWrtShell->GetDoc()->IsUpdateTOX() ) + { + SfxRequest aSfxRequest( FN_UPDATE_TOX, SfxCallMode::SLOT, GetPool() ); + Execute( aSfxRequest ); + m_pWrtShell->GetDoc()->SetUpdateTOX( false ); // reset again + m_pWrtShell->SttEndDoc(true); + } + + // No ResetModified, if there is already a view to this doc. + SfxViewFrame* pVFrame = GetViewFrame(); + SfxViewFrame* pFirst = SfxViewFrame::GetFirst(&rDocSh); + // Currently(360) the view is registered firstly after the CTOR, + // the following expression is also working if this changes. + // If the modification cannot be canceled by undo, then do NOT set + // the modify back. + // no reset of modified state, if document + // was already modified. + if (!m_pWrtShell->GetDoc()->GetIDocumentUndoRedo().IsUndoNoResetModified() && + ( !pFirst || pFirst == pVFrame ) && + !bIsDocModified ) + { + m_pWrtShell->ResetModified(); + } + + g_bNoInterrupt = bOld; + + // If a new GlobalDoc will be created, the navigator will also be generated. + if( dynamic_cast<const SwGlobalDocShell*>(&rDocSh) != nullptr && + !pVFrame->GetChildWindow( SID_NAVIGATOR )) + { + SfxBoolItem aNavi(SID_NAVIGATOR, true); + GetDispatcher().ExecuteList(SID_NAVIGATOR, SfxCallMode::ASYNCHRON, { &aNavi }); + } + + uno::Reference< frame::XFrame > xFrame = pVFrame->GetFrame().GetFrameInterface(); + + uno::Reference< frame::XFrame > xBeamerFrame = xFrame->findFrame( + "_beamer", frame::FrameSearchFlag::CHILDREN); + if(xBeamerFrame.is()) + { + SwDBData aData = m_pWrtShell->GetDBData(); + SwModule::ShowDBObj( *this, aData ); + } + + // has anybody calls the attrchanged handler in the constructor? + if( m_bAttrChgNotifiedWithRegistrations ) + { + GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); + if( m_aTimer.IsActive() ) + m_aTimer.Stop(); + } + + m_aTimer.SetInvokeHandler(LINK(this, SwView, TimeoutHdl)); + m_bAttrChgNotified = m_bAttrChgNotifiedWithRegistrations = false; + if (bOldModifyFlag) + rDocSh.EnableSetModified(); + InvalidateBorder(); + + if( !m_pHScrollbar->IsVisible( true ) ) + ShowHScrollbar( false ); + if( !m_pVScrollbar->IsVisible( true ) ) + ShowVScrollbar( false ); + + if (m_pWrtShell && m_pWrtShell->GetViewOptions()->IsShowOutlineContentVisibilityButton()) + m_pWrtShell->InvalidateOutlineContentVisibility(); + + GetViewFrame()->GetWindow().AddChildEventListener( LINK( this, SwView, WindowChildEventListener ) ); +} + +SwViewGlueDocShell::SwViewGlueDocShell(SwView& rView, SwDocShell& rDocSh) + : m_rView(rView) +{ + // Set DocShell + rDocSh.SetView(&m_rView); + SW_MOD()->SetView(&m_rView); +} + +SwViewGlueDocShell::~SwViewGlueDocShell() +{ + SwDocShell* pDocSh = m_rView.GetDocShell(); + if (pDocSh && pDocSh->GetView() == &m_rView) + pDocSh->SetView(nullptr); + if (SW_MOD()->GetView() == &m_rView) + SW_MOD()->SetView(nullptr); +} + +SwView::~SwView() +{ + // Notify other LOK views that we are going away. + SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_VIEW_CURSOR_VISIBLE, "visible", "false"); + SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_TEXT_VIEW_SELECTION, "selection", ""); + SfxLokHelper::notifyOtherViews(this, LOK_CALLBACK_GRAPHIC_VIEW_SELECTION, "selection", "EMPTY"); + + // Need to remove activated field's button before disposing EditWin. + GetWrtShell().getIDocumentMarkAccess()->ClearFieldActivation(); + + GetViewFrame()->GetWindow().RemoveChildEventListener( LINK( this, SwView, WindowChildEventListener ) ); + m_pPostItMgr.reset(); + + m_bInDtor = true; + m_pEditWin->Hide(); // prevent problems with painting + + // Set pointer in SwDocShell to the view again + m_xGlueDocShell.reset(); + + if( m_aTimer.IsActive() && m_bAttrChgNotifiedWithRegistrations ) + GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); + + // the last view must end the text edit + SdrView *pSdrView = m_pWrtShell ? m_pWrtShell->GetDrawView() : nullptr; + if( pSdrView && pSdrView->IsTextEdit() ) + pSdrView->SdrEndTextEdit( true ); + else if (pSdrView) + { + pSdrView->DisposeUndoManager(); + } + + SetWindow( nullptr ); + + m_pViewImpl->Invalidate(); + EndListening(*GetViewFrame()); + EndListening(*GetDocShell()); + m_pScrollFill.disposeAndClear(); + m_pWrtShell.reset(); // reset here so that it is not accessible by the following dtors. + m_pHScrollbar.disposeAndClear(); + m_pVScrollbar.disposeAndClear(); + m_pHRuler.disposeAndClear(); + m_pVRuler.disposeAndClear(); + m_pGlosHdl.reset(); + m_pViewImpl.reset(); + + // If this was enabled in the ctor for the frame, then disable it here. + static bool bRequestDoubleBuffering = getenv("VCL_DOUBLEBUFFERING_ENABLE"); + if (bRequestDoubleBuffering) + m_pEditWin->RequestDoubleBuffering(false); + m_pEditWin.disposeAndClear(); + + m_pFormatClipboard.reset(); +} + +SwDocShell* SwView::GetDocShell() +{ + SfxObjectShell* pDocShell = GetViewFrame()->GetObjectShell(); + return dynamic_cast<SwDocShell*>( pDocShell ); +} + +// Remember CursorPos + +void SwView::WriteUserData( OUString &rUserData, bool bBrowse ) +{ + // The browse flag will be passed from Sfx when documents are browsed + // (not to be confused with the BrowseMode). + // Then that stored data are not persistent! + + const SwRect& rRect = m_pWrtShell->GetCharRect(); + const tools::Rectangle& rVis = GetVisArea(); + + rUserData = OUString::number( rRect.Left() ); + rUserData += ";"; + rUserData += OUString::number( rRect.Top() ); + rUserData += ";"; + rUserData += OUString::number( m_pWrtShell->GetViewOptions()->GetZoom() ); + rUserData += ";"; + rUserData += OUString::number( rVis.Left() ); + rUserData += ";"; + rUserData += OUString::number( rVis.Top() ); + rUserData += ";"; + rUserData += OUString::number( bBrowse ? SAL_MIN_INT32 : rVis.Right()); + rUserData += ";"; + rUserData += OUString::number( bBrowse ? SAL_MIN_INT32 : rVis.Bottom()); + rUserData += ";"; + rUserData += OUString::number( + static_cast<sal_uInt16>(m_pWrtShell->GetViewOptions()->GetZoomType()));//eZoom; + rUserData += ";"; + rUserData += FrameTypeFlags::NONE == m_pWrtShell->GetSelFrameType() ? std::u16string_view(u"0") : std::u16string_view(u"1"); +} + +// Set CursorPos + +static bool lcl_IsOwnDocument( SwView& rView ) +{ + uno::Reference<document::XDocumentPropertiesSupplier> xDPS( + rView.GetDocShell()->GetModel(), uno::UNO_QUERY_THROW); + uno::Reference<document::XDocumentProperties> xDocProps + = xDPS->getDocumentProperties(); + OUString Created = xDocProps->getAuthor(); + OUString Changed = xDocProps->getModifiedBy(); + OUString FullName = SW_MOD()->GetUserOptions().GetFullName(); + return !FullName.isEmpty() + && (Changed == FullName || (Changed.isEmpty() && Created == FullName)); +} + +void SwView::ReadUserData( const OUString &rUserData, bool bBrowse ) +{ + if ( !(rUserData.indexOf(';')>=0 && // more than one token + // For document without layout only in the onlinelayout or + // while forward/backward + (!m_pWrtShell->IsNewLayout() || m_pWrtShell->GetViewOptions()->getBrowseMode() || bBrowse)) ) + return; + + bool bIsOwnDocument = lcl_IsOwnDocument( *this ); + + CurrShell aCurr(m_pWrtShell.get()); + + sal_Int32 nPos = 0; + + // No it is *not* a good idea to call GetToken within Point constr. immediately, + // because which parameter is evaluated first? + tools::Long nX = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )), + nY = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )); + Point aCursorPos( nX, nY ); + + sal_uInt16 nZoomFactor = + static_cast< sal_uInt16 >( o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )) ); + + tools::Long nLeft = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )), + nTop = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )), + nRight = o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )), + nBottom= o3tl::toInt32(o3tl::getToken(rUserData, 0, ';', nPos )); + + const tools::Long nAdd = m_pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2; + if ( nBottom > (m_pWrtShell->GetDocSize().Height()+nAdd) ) + return; + + m_pWrtShell->EnableSmooth( false ); + + const tools::Rectangle aVis( nLeft, nTop, nRight, nBottom ); + + sal_Int32 nOff = 0; + SvxZoomType eZoom; + if( !m_pWrtShell->GetViewOptions()->getBrowseMode() ) + eZoom = static_cast<SvxZoomType>(o3tl::narrowing<sal_uInt16>(o3tl::toInt32(o3tl::getToken(rUserData, nOff, ';', nPos )))); + else + { + eZoom = SvxZoomType::PERCENT; + ++nOff; + } + + bool bSelectObj = (0 != o3tl::toInt32(o3tl::getToken(rUserData, nOff, ';', nPos ))) + && m_pWrtShell->IsObjSelectable( aCursorPos ); + + // restore editing position + m_pViewImpl->SetRestorePosition(aCursorPos, bSelectObj); + // set flag value to avoid macro execution. + bool bSavedFlagValue = m_pWrtShell->IsMacroExecAllowed(); + m_pWrtShell->SetMacroExecAllowed( false ); +// os: changed: The user data has to be read if the view is switched back from page preview +// go to the last editing position when opening own files + if(m_bOldShellWasPagePreview || bIsOwnDocument) + { + m_pWrtShell->SwCursorShell::SetCursor( aCursorPos, !bSelectObj ); + if( bSelectObj ) + { + m_pWrtShell->SelectObj( aCursorPos ); + m_pWrtShell->EnterSelFrameMode( &aCursorPos ); + } + } + + // reset flag value + m_pWrtShell->SetMacroExecAllowed( bSavedFlagValue ); + + // set visible area before applying + // information from print preview. Otherwise, the applied information + // is lost. +// os: changed: The user data has to be read if the view is switched back from page preview +// go to the last editing position when opening own files + if(m_bOldShellWasPagePreview || bIsOwnDocument ) + { + if ( bBrowse ) + SetVisArea( aVis.TopLeft() ); + else + SetVisArea( aVis ); + } + + //apply information from print preview - if available + if( !m_sNewCursorPos.isEmpty() ) + { + sal_Int32 nIdx{ 0 }; + const tools::Long nXTmp = o3tl::toInt32(o3tl::getToken(m_sNewCursorPos, 0, ';', nIdx )); + const tools::Long nYTmp = o3tl::toInt32(o3tl::getToken(m_sNewCursorPos, 0, ';', nIdx )); + Point aCursorPos2( nXTmp, nYTmp ); + bSelectObj = m_pWrtShell->IsObjSelectable( aCursorPos2 ); + + m_pWrtShell->SwCursorShell::SetCursor( aCursorPos2 ); + if( bSelectObj ) + { + m_pWrtShell->SelectObj( aCursorPos2 ); + m_pWrtShell->EnterSelFrameMode( &aCursorPos2 ); + } + m_pWrtShell->MakeSelVisible(); + m_sNewCursorPos.clear(); + } + else if(USHRT_MAX != m_nNewPage) + { + m_pWrtShell->GotoPage(m_nNewPage, true); + m_nNewPage = USHRT_MAX; + } + + SelectShell(); + + m_pWrtShell->StartAction(); + const SwViewOption* pVOpt = m_pWrtShell->GetViewOptions(); + if( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom ) + SetZoom( eZoom, nZoomFactor); + + m_pWrtShell->LockView( true ); + m_pWrtShell->EndAction(); + m_pWrtShell->LockView( false ); + m_pWrtShell->EnableSmooth( true ); +} + +void SwView::ReadUserDataSequence ( const uno::Sequence < beans::PropertyValue >& rSequence ) +{ + if(GetDocShell()->IsPreview()||m_bIsPreviewDoubleClick) + return; + bool bIsOwnDocument = lcl_IsOwnDocument( *this ); + + CurrShell aCurr(m_pWrtShell.get()); + const SwRect& rRect = m_pWrtShell->GetCharRect(); + const tools::Rectangle &rVis = GetVisArea(); + const SwViewOption* pVOpt = m_pWrtShell->GetViewOptions(); + + sal_Int64 nX = rRect.Left(), nY = rRect.Top(), nLeft = rVis.Left(), nTop = rVis.Top(); + sal_Int64 nRight = nLeft; + sal_Int64 nBottom = LONG_MIN; + sal_Int16 nZoomType = static_cast< sal_Int16 >(pVOpt->GetZoomType()); + sal_Int16 nZoomFactor = static_cast < sal_Int16 > (pVOpt->GetZoom()); + bool bViewLayoutBookMode = pVOpt->IsViewLayoutBookMode(); + sal_Int16 nViewLayoutColumns = pVOpt->GetViewLayoutColumns(); + + bool bSelectedFrame = ( m_pWrtShell->GetSelFrameType() != FrameTypeFlags::NONE ), + bGotVisibleLeft = false, + bGotVisibleTop = false, bGotVisibleRight = false, + bGotVisibleBottom = false, bGotZoomType = false, + bGotZoomFactor = false, bGotIsSelectedFrame = false, + bGotViewLayoutColumns = false, bGotViewLayoutBookMode = false, + bBrowseMode = false, bGotBrowseMode = false; + bool bKeepRatio = pVOpt->IsKeepRatio(); + bool bGotKeepRatio = false; + + for (const beans::PropertyValue& rValue : rSequence) + { + if ( rValue.Name == "ViewLeft" ) + { + rValue.Value >>= nX; + nX = o3tl::toTwips(nX, o3tl::Length::mm100); + } + else if ( rValue.Name == "ViewTop" ) + { + rValue.Value >>= nY; + nY = o3tl::toTwips(nY, o3tl::Length::mm100); + } + else if ( rValue.Name == "VisibleLeft" ) + { + rValue.Value >>= nLeft; + nLeft = o3tl::toTwips(nLeft, o3tl::Length::mm100); + bGotVisibleLeft = true; + } + else if ( rValue.Name == "VisibleTop" ) + { + rValue.Value >>= nTop; + nTop = o3tl::toTwips(nTop, o3tl::Length::mm100); + bGotVisibleTop = true; + } + else if ( rValue.Name == "VisibleRight" ) + { + rValue.Value >>= nRight; + nRight = o3tl::toTwips(nRight, o3tl::Length::mm100); + bGotVisibleRight = true; + } + else if ( rValue.Name == "VisibleBottom" ) + { + rValue.Value >>= nBottom; + nBottom = o3tl::toTwips(nBottom, o3tl::Length::mm100); + bGotVisibleBottom = true; + } + else if ( rValue.Name == "ZoomType" ) + { + rValue.Value >>= nZoomType; + bGotZoomType = true; + } + else if ( rValue.Name == "ZoomFactor" ) + { + rValue.Value >>= nZoomFactor; + bGotZoomFactor = true; + } + else if ( rValue.Name == "ViewLayoutColumns" ) + { + rValue.Value >>= nViewLayoutColumns; + bGotViewLayoutColumns = true; + } + else if ( rValue.Name == "ViewLayoutBookMode" ) + { + bViewLayoutBookMode = *o3tl::doAccess<bool>(rValue.Value); + bGotViewLayoutBookMode = true; + } + else if ( rValue.Name == "IsSelectedFrame" ) + { + rValue.Value >>= bSelectedFrame; + bGotIsSelectedFrame = true; + } + else if (rValue.Name == "ShowOnlineLayout") + { + rValue.Value >>= bBrowseMode; + bGotBrowseMode = true; + } + else if (rValue.Name == "KeepRatio") + { + rValue.Value >>= bKeepRatio; + bGotKeepRatio = true; + } + // Fallback to common SdrModel processing + else + GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel()->ReadUserDataSequenceValue(&rValue); + } + if (bGotBrowseMode) + { + // delegate further + GetViewImpl()->GetUNOObject_Impl()->getViewSettings()->setPropertyValue("ShowOnlineLayout", uno::Any(bBrowseMode)); + } + + SelectShell(); + + if (!bGotVisibleBottom) + return; + + Point aCursorPos( nX, nY ); + const tools::Long nAdd = m_pWrtShell->GetViewOptions()->getBrowseMode() ? DOCUMENTBORDER : DOCUMENTBORDER*2; + if (nBottom > (m_pWrtShell->GetDocSize().Height()+nAdd) ) + return; + + m_pWrtShell->EnableSmooth( false ); + const tools::Rectangle aVis( nLeft, nTop, nRight, nBottom ); + + SvxZoomType eZoom; + if ( !m_pWrtShell->GetViewOptions()->getBrowseMode() ) + eZoom = static_cast < SvxZoomType > ( nZoomType ); + else + { + eZoom = SvxZoomType::PERCENT; + } + if (bGotIsSelectedFrame) + { + bool bSelectObj = bSelectedFrame && m_pWrtShell->IsObjSelectable( aCursorPos ); + + // set flag value to avoid macro execution. + bool bSavedFlagValue = m_pWrtShell->IsMacroExecAllowed(); + m_pWrtShell->SetMacroExecAllowed( false ); +// os: changed: The user data has to be read if the view is switched back from page preview +// go to the last editing position when opening own files + m_pViewImpl->SetRestorePosition(aCursorPos, bSelectObj); + if(m_bOldShellWasPagePreview|| bIsOwnDocument) + { + m_pWrtShell->SwCursorShell::SetCursor( aCursorPos, !bSelectObj ); + + // Update the shell to toggle Header/Footer edit if needed + bool bInHeader = true; + if ( m_pWrtShell->IsInHeaderFooter( &bInHeader ) ) + { + if ( !bInHeader ) + { + m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Footer, true ); + m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Header, false ); + } + else + { + m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Header, true ); + m_pWrtShell->SetShowHeaderFooterSeparator( FrameControlType::Footer, false ); + } + + // Force repaint + m_pWrtShell->GetWin()->Invalidate(); + } + if ( m_pWrtShell->IsInHeaderFooter() != m_pWrtShell->IsHeaderFooterEdit() ) + m_pWrtShell->ToggleHeaderFooterEdit(); + + if( bSelectObj ) + { + m_pWrtShell->SelectObj( aCursorPos ); + m_pWrtShell->EnterSelFrameMode( &aCursorPos ); + } + } + + // reset flag value + m_pWrtShell->SetMacroExecAllowed( bSavedFlagValue ); + } + + if (bGotKeepRatio && bKeepRatio != pVOpt->IsKeepRatio()) + { + // Got a custom value, then it makes sense to trigger notifications. + SwViewOption aUsrPref(*pVOpt); + aUsrPref.SetKeepRatio(bKeepRatio); + SW_MOD()->ApplyUsrPref(aUsrPref, this); + } + + // Set ViewLayoutSettings + const bool bSetViewLayoutSettings = bGotViewLayoutColumns && bGotViewLayoutBookMode && + ( pVOpt->GetViewLayoutColumns() != nViewLayoutColumns || pVOpt->IsViewLayoutBookMode() != bViewLayoutBookMode ); + + const bool bSetViewSettings = bGotZoomType && bGotZoomFactor && + ( pVOpt->GetZoom() != nZoomFactor || pVOpt->GetZoomType() != eZoom ); + + // In case we have a 'fixed' view layout of 2 or more columns, + // we have to apply the view options *before* starting the action. + // Otherwise the SetZoom function cannot work correctly, because + // the view layout hasn't been calculated. + const bool bZoomNeedsViewLayout = bSetViewLayoutSettings && + 1 < nViewLayoutColumns && + bSetViewSettings && + eZoom != SvxZoomType::PERCENT; + + if ( !bZoomNeedsViewLayout ) + m_pWrtShell->StartAction(); + + if ( bSetViewLayoutSettings ) + SetViewLayout( nViewLayoutColumns, bViewLayoutBookMode, true ); + + if ( bZoomNeedsViewLayout ) + m_pWrtShell->StartAction(); + + if ( bSetViewSettings ) + SetZoom( eZoom, nZoomFactor, true ); + +// os: changed: The user data has to be read if the view is switched back from page preview +// go to the last editing position when opening own files + if(m_bOldShellWasPagePreview||bIsOwnDocument) + { + if ( bGotVisibleLeft && bGotVisibleTop ) + { + Point aTopLeft(aVis.TopLeft()); + // make sure the document is still centered + const SwTwips lBorder = IsDocumentBorder() ? DOCUMENTBORDER : 2 * DOCUMENTBORDER; + SwTwips nEditWidth = GetEditWin().GetOutDev()->GetOutputSize().Width(); + if(nEditWidth > (m_aDocSz.Width() + lBorder )) + aTopLeft.setX( ( m_aDocSz.Width() + lBorder - nEditWidth ) / 2 ); + else + { + //check if the values are possible + tools::Long nXMax = m_pHScrollbar->GetRangeMax() - m_pHScrollbar->GetVisibleSize(); + if( aTopLeft.X() > nXMax ) + aTopLeft.setX( nXMax < 0 ? 0 : nXMax ); + } + SetVisArea( aTopLeft ); + } + else if (bGotVisibleLeft && bGotVisibleTop && bGotVisibleRight && bGotVisibleBottom ) + SetVisArea( aVis ); + } + + m_pWrtShell->LockView( true ); + m_pWrtShell->EndAction(); + m_pWrtShell->LockView( false ); + m_pWrtShell->EnableSmooth( true ); + +} + +void SwView::WriteUserDataSequence ( uno::Sequence < beans::PropertyValue >& rSequence ) +{ + const SwRect& rRect = m_pWrtShell->GetCharRect(); + const tools::Rectangle& rVis = GetVisArea(); + + std::vector<beans::PropertyValue> aVector; + + sal_uInt16 nViewID( GetViewFrame()->GetCurViewId()); + aVector.push_back(comphelper::makePropertyValue("ViewId", "view" + OUString::number(nViewID))); + + aVector.push_back(comphelper::makePropertyValue("ViewLeft", convertTwipToMm100 ( rRect.Left() ))); + + aVector.push_back(comphelper::makePropertyValue("ViewTop", convertTwipToMm100 ( rRect.Top() ))); + + auto visibleLeft = convertTwipToMm100 ( rVis.Left() ); + aVector.push_back(comphelper::makePropertyValue("VisibleLeft", visibleLeft)); + + auto visibleTop = convertTwipToMm100 ( rVis.Top() ); + aVector.push_back(comphelper::makePropertyValue("VisibleTop", visibleTop)); + + auto visibleRight = rVis.IsWidthEmpty() ? visibleLeft : convertTwipToMm100 ( rVis.Right() ); + aVector.push_back(comphelper::makePropertyValue("VisibleRight", visibleRight)); + + auto visibleBottom = rVis.IsHeightEmpty() ? visibleTop : convertTwipToMm100 ( rVis.Bottom() ); + aVector.push_back(comphelper::makePropertyValue("VisibleBottom", visibleBottom)); + + const sal_Int16 nZoomType = static_cast< sal_Int16 >(m_pWrtShell->GetViewOptions()->GetZoomType()); + aVector.push_back(comphelper::makePropertyValue("ZoomType", nZoomType)); + + const sal_Int16 nViewLayoutColumns = static_cast< sal_Int16 >(m_pWrtShell->GetViewOptions()->GetViewLayoutColumns()); + aVector.push_back(comphelper::makePropertyValue("ViewLayoutColumns", nViewLayoutColumns)); + + aVector.push_back(comphelper::makePropertyValue("ViewLayoutBookMode", m_pWrtShell->GetViewOptions()->IsViewLayoutBookMode())); + + aVector.push_back(comphelper::makePropertyValue("ZoomFactor", static_cast < sal_Int16 > (m_pWrtShell->GetViewOptions()->GetZoom()))); + + aVector.push_back(comphelper::makePropertyValue("IsSelectedFrame", FrameTypeFlags::NONE != m_pWrtShell->GetSelFrameType())); + + aVector.push_back( + comphelper::makePropertyValue("KeepRatio", m_pWrtShell->GetViewOptions()->IsKeepRatio())); + + rSequence = comphelper::containerToSequence(aVector); + + // Common SdrModel processing + GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel()->WriteUserDataSequence(rSequence); +} + +void SwView::ShowCursor( bool bOn ) +{ + //don't scroll the cursor into the visible area + bool bUnlockView = !m_pWrtShell->IsViewLocked(); + m_pWrtShell->LockView( true ); //lock visible section + + if( !bOn ) + m_pWrtShell->HideCursor(); + else if( !m_pWrtShell->IsFrameSelected() && !m_pWrtShell->IsObjSelected() ) + m_pWrtShell->ShowCursor(); + + if( bUnlockView ) + m_pWrtShell->LockView( false ); +} + +ErrCode SwView::DoVerb(sal_Int32 nVerb) +{ + if ( !GetViewFrame()->GetFrame().IsInPlace() ) + { + SwWrtShell &rSh = GetWrtShell(); + const SelectionType nSel = rSh.GetSelectionType(); + if ( nSel & SelectionType::Ole ) + rSh.LaunchOLEObj( nVerb ); + } + return ERRCODE_NONE; +} + +// only return true for a text selection + +bool SwView::HasSelection( bool bText ) const +{ + return bText ? GetWrtShell().SwCursorShell::HasSelection() + : GetWrtShell().HasSelection(); +} + +OUString SwView::GetSelectionText( bool bCompleteWrds, bool /*bOnlyASample*/ ) +{ + return GetSelectionTextParam( bCompleteWrds, true ); +} + +OUString SwView::GetSelectionTextParam( bool bCompleteWrds, bool bEraseTrail ) +{ + OUString sReturn; + if( bCompleteWrds && !GetWrtShell().HasSelection() ) + GetWrtShell().SelWrd(); + + GetWrtShell().GetSelectedText( sReturn ); + if( bEraseTrail ) + sReturn = comphelper::string::stripEnd(sReturn, ' '); + return sReturn; +} + +SwGlossaryHdl* SwView::GetGlosHdl() +{ + if(!m_pGlosHdl) + m_pGlosHdl.reset(new SwGlossaryHdl(GetViewFrame(), m_pWrtShell.get())); + return m_pGlosHdl.get(); +} + +void SwView::Notify( SfxBroadcaster& rBC, const SfxHint& rHint ) +{ + bool bCallBase = true; + if(auto pChangedHint = dynamic_cast<const FmDesignModeChangedHint*>(&rHint)) + { + bool bDesignMode = pChangedHint->GetDesignMode(); + if (!bDesignMode && GetDrawFuncPtr()) + { + GetDrawFuncPtr()->Deactivate(); + SetDrawFuncPtr(nullptr); + LeaveDrawCreate(); + AttrChangedNotify(nullptr); + } + } + else + { + SfxHintId nId = rHint.GetId(); + + switch ( nId ) + { + // sub shells will be destroyed by the + // dispatcher, if the view frame is dying. Thus, reset member <pShell>. + case SfxHintId::Dying: + { + if ( &rBC == GetViewFrame() ) + { + ResetSubShell(); + } + } + break; + case SfxHintId::ModeChanged: + { + // Modal mode change-over? + bool bModal = GetDocShell()->IsInModalMode(); + m_pHRuler->SetActive( !bModal ); + m_pVRuler->SetActive( !bModal ); + } + + [[fallthrough]]; + + case SfxHintId::TitleChanged: + if ( GetDocShell()->IsReadOnly() != GetWrtShell().GetViewOptions()->IsReadonly() ) + { + SwWrtShell &rSh = GetWrtShell(); + rSh.SetReadonlyOption( GetDocShell()->IsReadOnly() ); + + if ( rSh.GetViewOptions()->IsViewVRuler() ) + CreateVRuler(); + else + KillVRuler(); + if ( rSh.GetViewOptions()->IsViewHRuler() ) + CreateTab(); + else + KillTab(); + bool bReadonly = GetDocShell()->IsReadOnly(); + // if document is to be opened in alive-mode then this has to be + // regarded while switching from readonly-mode to edit-mode + if( !bReadonly ) + { + SwDrawModel * pDrawDoc = GetDocShell()->GetDoc()->getIDocumentDrawModelAccess().GetDrawModel(); + if (pDrawDoc) + { + if( !pDrawDoc->GetOpenInDesignMode() ) + break;// don't touch the design mode + } + } + SfxBoolItem aItem( SID_FM_DESIGN_MODE, !bReadonly); + GetDispatcher().ExecuteList(SID_FM_DESIGN_MODE, + SfxCallMode::ASYNCHRON, { &aItem }); + } + break; + + case SfxHintId::SwDrawViewsCreated: + { + bCallBase = false; + if ( GetFormShell() ) + { + GetFormShell()->SetView(dynamic_cast<FmFormView*>(GetWrtShell().GetDrawView())); + SfxBoolItem aItem( SID_FM_DESIGN_MODE, !GetDocShell()->IsReadOnly()); + GetDispatcher().ExecuteList(SID_FM_DESIGN_MODE, + SfxCallMode::SYNCHRON, { &aItem }); + } + } + break; + case SfxHintId::RedlineChanged: + { + static sal_uInt16 const aSlotRedLine[] = { + FN_REDLINE_ACCEPT_DIRECT, + FN_REDLINE_REJECT_DIRECT, + FN_REDLINE_NEXT_CHANGE, + FN_REDLINE_PREV_CHANGE, + FN_REDLINE_ACCEPT_ALL, + FN_REDLINE_REJECT_ALL, + 0 + }; + GetViewFrame()->GetBindings().Invalidate(aSlotRedLine); + } + break; + default: break; + } + } + + if ( bCallBase ) + SfxViewShell::Notify(rBC, rHint); +} + +#if defined(_WIN32) || defined UNX + +void SwView::ScannerEventHdl() +{ + uno::Reference< XScannerManager2 > xScanMgr = SW_MOD()->GetScannerManager(); + if( xScanMgr.is() ) + { + const ScannerContext aContext( xScanMgr->getAvailableScanners().getConstArray()[ 0 ] ); + const ScanError eError = xScanMgr->getError( aContext ); + + if( ScanError_ScanErrorNone == eError ) + { + const uno::Reference< awt::XBitmap > xBitmap( xScanMgr->getBitmap( aContext ) ); + + if( xBitmap.is() ) + { + const BitmapEx aScanBmp( VCLUnoHelper::GetBitmap( xBitmap ) ); + + if( !aScanBmp.IsEmpty() ) + { + Graphic aGrf(aScanBmp); + m_pWrtShell->InsertGraphic( OUString(), OUString(), aGrf ); + } + } + } + } + SfxBindings& rBind = GetViewFrame()->GetBindings(); + rBind.Invalidate( SID_TWAIN_SELECT ); + rBind.Invalidate( SID_TWAIN_TRANSFER ); +} +#endif + +void SwView::StopShellTimer() +{ + if(m_aTimer.IsActive()) + { + m_aTimer.Stop(); + if ( m_bAttrChgNotifiedWithRegistrations ) + { + GetViewFrame()->GetBindings().LEAVEREGISTRATIONS(); + m_bAttrChgNotifiedWithRegistrations = false; + } + SelectShell(); + m_bAttrChgNotified = false; + } +} + +bool SwView::PrepareClose( bool bUI ) +{ + SfxViewFrame* pVFrame = GetViewFrame(); + pVFrame->SetChildWindow( SwInputChild::GetChildWindowId(), false ); + if( pVFrame->GetDispatcher()->IsLocked() ) + pVFrame->GetDispatcher()->Lock(false); + + if ( m_pFormShell && !m_pFormShell->PrepareClose( bUI ) ) + { + return false; + } + return SfxViewShell::PrepareClose( bUI ); +} + +// status methods for clipboard. +// Status changes now notified from the clipboard. +bool SwView::IsPasteAllowed() +{ + SotExchangeDest nPasteDestination = SwTransferable::GetSotDestination( *m_pWrtShell ); + if( m_nLastPasteDestination != nPasteDestination ) + { + TransferableDataHelper aDataHelper( + TransferableDataHelper::CreateFromSystemClipboard( + &GetEditWin()) ); + if( aDataHelper.GetXTransferable().is() ) + { + m_bPasteState = SwTransferable::IsPaste( *m_pWrtShell, aDataHelper ); + m_bPasteSpecialState = SwTransferable::IsPasteSpecial( + *m_pWrtShell, aDataHelper ); + } + else + m_bPasteState = m_bPasteSpecialState = false; + + if( static_cast<SotExchangeDest>(0xFFFF) == m_nLastPasteDestination ) // the init value + m_pViewImpl->AddClipboardListener(); + m_nLastPasteDestination = nPasteDestination; + } + return m_bPasteState; +} + +bool SwView::IsPasteSpecialAllowed() +{ + if ( m_pFormShell && m_pFormShell->IsActiveControl() ) + return false; + + SotExchangeDest nPasteDestination = SwTransferable::GetSotDestination( *m_pWrtShell ); + if( m_nLastPasteDestination != nPasteDestination ) + { + TransferableDataHelper aDataHelper( + TransferableDataHelper::CreateFromSystemClipboard( + &GetEditWin()) ); + if( aDataHelper.GetXTransferable().is() ) + { + m_bPasteState = SwTransferable::IsPaste( *m_pWrtShell, aDataHelper ); + m_bPasteSpecialState = SwTransferable::IsPasteSpecial( + *m_pWrtShell, aDataHelper ); + } + else + m_bPasteState = m_bPasteSpecialState = false; + + if( static_cast<SotExchangeDest>(0xFFFF) == m_nLastPasteDestination ) // the init value + m_pViewImpl->AddClipboardListener(); + } + return m_bPasteSpecialState; +} + +bool SwView::IsPasteSpreadsheet(bool bHasOwnTableCopied) +{ + TransferableDataHelper aDataHelper( + TransferableDataHelper::CreateFromSystemClipboard( + &GetEditWin()) ); + if( aDataHelper.GetXTransferable().is() ) + { + if (bHasOwnTableCopied && SwTransferable::IsPasteOwnFormat( aDataHelper )) + return true; + return aDataHelper.HasFormat( SotClipboardFormatId::SYLK ) || aDataHelper.HasFormat( SotClipboardFormatId::SYLK_BIGCAPS ); + } + return false; +} + +void SwView::NotifyDBChanged() +{ + GetViewImpl()->GetUNOObject_Impl()->NotifyDBChanged(); +} + +// Printing + +SfxObjectShellLock SwView::CreateTmpSelectionDoc() +{ + SwXTextView *const pTempImpl = GetViewImpl()->GetUNOObject_Impl(); + return pTempImpl->BuildTmpSelectionDoc(); +} + +void SwView::AddTransferable(SwTransferable& rTransferable) +{ + GetViewImpl()->AddTransferable(rTransferable); +} + +tools::Rectangle SwView::getLOKVisibleArea() const +{ + SwViewShell* pVwSh = GetWrtShellPtr(); + if (pVwSh) + return pVwSh->getLOKVisibleArea(); + else + return tools::Rectangle(); +} + +void SwView::flushPendingLOKInvalidateTiles() +{ + SwWrtShell* pSh = GetWrtShellPtr(); + assert(pSh); + pSh->FlushPendingLOKInvalidateTiles(); +} + +OString SwView::getLOKPayload(int nType, int nViewId, bool* ignore) const +{ + SwWrtShell* pSh = GetWrtShellPtr(); + assert(pSh); + return pSh->getLOKPayload(nType, nViewId, ignore); +} + +OUString SwView::GetDataSourceName() const +{ + uno::Reference<lang::XMultiServiceFactory> xFactory(GetDocShell()->GetModel(), uno::UNO_QUERY); + uno::Reference<beans::XPropertySet> xSettings( + xFactory->createInstance("com.sun.star.document.Settings"), uno::UNO_QUERY); + OUString sDataSourceName = ""; + xSettings->getPropertyValue("CurrentDatabaseDataSource") >>= sDataSourceName; + + return sDataSourceName; +} + +bool SwView::IsDataSourceAvailable(const OUString sDataSourceName) +{ + uno::Reference< uno::XComponentContext > xContext( ::comphelper::getProcessComponentContext() ); + Reference< XDatabaseContext> xDatabaseContext = DatabaseContext::create(xContext); + + return xDatabaseContext->hasByName(sDataSourceName); +} + +namespace sw { + +void InitPrintOptionsFromApplication(SwPrintData & o_rData, bool const bWeb) +{ + o_rData = *SW_MOD()->GetPrtOptions(bWeb); +} + +} // namespace sw + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |