summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/pmbus.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/hwmon/pmbus.rst
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/hwmon/pmbus.rst')
-rw-r--r--Documentation/hwmon/pmbus.rst277
1 files changed, 277 insertions, 0 deletions
diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst
new file mode 100644
index 000000000..7ecfec6ca
--- /dev/null
+++ b/Documentation/hwmon/pmbus.rst
@@ -0,0 +1,277 @@
+Kernel driver pmbus
+===================
+
+Supported chips:
+
+ * Flex BMR310, BMR453, BMR454, BMR456, BMR457, BMR458, BMR480,
+ BMR490, BMR491, BMR492
+
+ Prefixes: 'bmr310', 'bmr453', 'bmr454', 'bmr456', 'bmr457', 'bmr458', 'bmr480',
+ 'bmr490', 'bmr491', 'bmr492'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ https://flexpowermodules.com/products
+
+
+ * ON Semiconductor ADP4000, NCP4200, NCP4208
+
+ Prefixes: 'adp4000', 'ncp4200', 'ncp4208'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ https://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF
+
+ https://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
+
+ https://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
+
+ * Lineage Power
+
+ Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
+
+ http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
+
+ * Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
+
+ Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
+
+ Addresses scanned: -
+
+ Datasheets:
+
+ https://www.ti.com/lit/gpn/tps40400
+
+ https://www.ti.com/lit/gpn/tps544b20
+
+ https://www.ti.com/lit/gpn/tps544b25
+
+ https://www.ti.com/lit/gpn/tps544c20
+
+ https://www.ti.com/lit/gpn/tps544c25
+
+ * Maxim MAX20796
+
+ Prefix: 'max20796'
+
+ Addresses scanned: -
+
+ Datasheet:
+
+ Not published
+
+ * Generic PMBus devices
+
+ Prefix: 'pmbus'
+
+ Addresses scanned: -
+
+ Datasheet: n.a.
+
+
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for various PMBus compliant devices.
+It supports voltage, current, power, and temperature sensors as supported
+by the device.
+
+Each monitored channel has its own high and low limits, plus a critical
+limit.
+
+Fan support will be added in a later version of this driver.
+
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices, since there is no register
+which can be safely used to identify the chip (The MFG_ID register is not
+supported by all chips), and since there is no well defined address range for
+PMBus devices. You will have to instantiate the devices explicitly.
+
+Example: the following will load the driver for an LTC2978 at address 0x60
+on I2C bus #1::
+
+ $ modprobe pmbus
+ $ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
+
+
+Platform data support
+---------------------
+
+Support for additional PMBus chips can be added by defining chip parameters in
+a new chip specific driver file. For example, (untested) code to add support for
+Emerson DS1200 power modules might look as follows::
+
+ static struct pmbus_driver_info ds1200_info = {
+ .pages = 1,
+ /* Note: All other sensors are in linear mode */
+ .direct[PSC_VOLTAGE_OUT] = true,
+ .direct[PSC_TEMPERATURE] = true,
+ .direct[PSC_CURRENT_OUT] = true,
+ .m[PSC_VOLTAGE_IN] = 1,
+ .b[PSC_VOLTAGE_IN] = 0,
+ .R[PSC_VOLTAGE_IN] = 3,
+ .m[PSC_VOLTAGE_OUT] = 1,
+ .b[PSC_VOLTAGE_OUT] = 0,
+ .R[PSC_VOLTAGE_OUT] = 3,
+ .m[PSC_TEMPERATURE] = 1,
+ .b[PSC_TEMPERATURE] = 0,
+ .R[PSC_TEMPERATURE] = 3,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
+ | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+ | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+ | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
+ | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+ | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
+ };
+
+ static int ds1200_probe(struct i2c_client *client)
+ {
+ return pmbus_do_probe(client, &ds1200_info);
+ }
+
+ static const struct i2c_device_id ds1200_id[] = {
+ {"ds1200", 0},
+ {}
+ };
+
+ MODULE_DEVICE_TABLE(i2c, ds1200_id);
+
+ /* This is the driver that will be inserted */
+ static struct i2c_driver ds1200_driver = {
+ .driver = {
+ .name = "ds1200",
+ },
+ .probe_new = ds1200_probe,
+ .id_table = ds1200_id,
+ };
+
+ static int __init ds1200_init(void)
+ {
+ return i2c_add_driver(&ds1200_driver);
+ }
+
+ static void __exit ds1200_exit(void)
+ {
+ i2c_del_driver(&ds1200_driver);
+ }
+
+
+Sysfs entries
+-------------
+
+When probing the chip, the driver identifies which PMBus registers are
+supported, and determines available sensors from this information.
+Attribute files only exist if respective sensors are supported by the chip.
+Labels are provided to inform the user about the sensor associated with
+a given sysfs entry.
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+inX_input Measured voltage. From READ_VIN or READ_VOUT register.
+inX_min Minimum Voltage.
+ From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
+inX_max Maximum voltage.
+ From VIN_OV_WARN_LIMIT or VOUT_OV_WARN_LIMIT register.
+inX_lcrit Critical minimum Voltage.
+ From VIN_UV_FAULT_LIMIT or VOUT_UV_FAULT_LIMIT register.
+inX_crit Critical maximum voltage.
+ From VIN_OV_FAULT_LIMIT or VOUT_OV_FAULT_LIMIT register.
+inX_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+inX_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+inX_lcrit_alarm Voltage critical low alarm.
+ From VOLTAGE_UV_FAULT status.
+inX_crit_alarm Voltage critical high alarm.
+ From VOLTAGE_OV_FAULT status.
+inX_label "vin", "vcap", or "voutY"
+inX_rated_min Minimum rated voltage.
+ From MFR_VIN_MIN or MFR_VOUT_MIN register.
+inX_rated_max Maximum rated voltage.
+ From MFR_VIN_MAX or MFR_VOUT_MAX register.
+
+currX_input Measured current. From READ_IIN or READ_IOUT register.
+currX_max Maximum current.
+ From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT register.
+currX_lcrit Critical minimum output current.
+ From IOUT_UC_FAULT_LIMIT register.
+currX_crit Critical maximum current.
+ From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
+currX_alarm Current high alarm.
+ From IIN_OC_WARNING or IOUT_OC_WARNING status.
+currX_max_alarm Current high alarm.
+ From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
+currX_lcrit_alarm Output current critical low alarm.
+ From IOUT_UC_FAULT status.
+currX_crit_alarm Current critical high alarm.
+ From IIN_OC_FAULT or IOUT_OC_FAULT status.
+currX_label "iin", "iinY", "iinY.Z", "ioutY", or "ioutY.Z",
+ where Y reflects the page number and Z reflects the
+ phase.
+currX_rated_max Maximum rated current.
+ From MFR_IIN_MAX or MFR_IOUT_MAX register.
+
+powerX_input Measured power. From READ_PIN or READ_POUT register.
+powerX_cap Output power cap. From POUT_MAX register.
+powerX_max Power limit. From PIN_OP_WARN_LIMIT or
+ POUT_OP_WARN_LIMIT register.
+powerX_crit Critical output power limit.
+ From POUT_OP_FAULT_LIMIT register.
+powerX_alarm Power high alarm.
+ From PIN_OP_WARNING or POUT_OP_WARNING status.
+powerX_crit_alarm Output power critical high alarm.
+ From POUT_OP_FAULT status.
+powerX_label "pin", "pinY", "pinY.Z", "poutY", or "poutY.Z",
+ where Y reflects the page number and Z reflects the
+ phase.
+powerX_rated_max Maximum rated power.
+ From MFR_PIN_MAX or MFR_POUT_MAX register.
+
+tempX_input Measured temperature.
+ From READ_TEMPERATURE_X register.
+tempX_min Minimum temperature. From UT_WARN_LIMIT register.
+tempX_max Maximum temperature. From OT_WARN_LIMIT register.
+tempX_lcrit Critical low temperature.
+ From UT_FAULT_LIMIT register.
+tempX_crit Critical high temperature.
+ From OT_FAULT_LIMIT register.
+tempX_min_alarm Chip temperature low alarm. Set by comparing
+ READ_TEMPERATURE_X with UT_WARN_LIMIT if
+ TEMP_UT_WARNING status is set.
+tempX_max_alarm Chip temperature high alarm. Set by comparing
+ READ_TEMPERATURE_X with OT_WARN_LIMIT if
+ TEMP_OT_WARNING status is set.
+tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing
+ READ_TEMPERATURE_X with UT_FAULT_LIMIT if
+ TEMP_UT_FAULT status is set.
+tempX_crit_alarm Chip temperature critical high alarm. Set by comparing
+ READ_TEMPERATURE_X with OT_FAULT_LIMIT if
+ TEMP_OT_FAULT status is set.
+tempX_rated_min Minimum rated temperature.
+ From MFR_TAMBIENT_MIN register.
+tempX_rated_max Maximum rated temperature.
+ From MFR_TAMBIENT_MAX, MFR_MAX_TEMP_1, MFR_MAX_TEMP_2 or
+ MFR_MAX_TEMP_3 register.
+======================= ========================================================