summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/w83781d.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/hwmon/w83781d.rst
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/hwmon/w83781d.rst')
-rw-r--r--Documentation/hwmon/w83781d.rst513
1 files changed, 513 insertions, 0 deletions
diff --git a/Documentation/hwmon/w83781d.rst b/Documentation/hwmon/w83781d.rst
new file mode 100644
index 000000000..c2dcb6856
--- /dev/null
+++ b/Documentation/hwmon/w83781d.rst
@@ -0,0 +1,513 @@
+Kernel driver w83781d
+=====================
+
+Supported chips:
+
+ * Winbond W83781D
+
+ Prefix: 'w83781d'
+
+ Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
+
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
+
+ * Winbond W83782D
+
+ Prefix: 'w83782d'
+
+ Addresses scanned: I2C 0x28 - 0x2f, ISA 0x290 (8 I/O ports)
+
+ Datasheet: https://www.winbond.com
+
+ * Winbond W83783S
+
+ Prefix: 'w83783s'
+
+ Addresses scanned: I2C 0x2d
+
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
+
+ * Asus AS99127F
+
+ Prefix: 'as99127f'
+
+ Addresses scanned: I2C 0x28 - 0x2f
+
+ Datasheet: Unavailable from Asus
+
+
+
+Authors:
+
+ - Frodo Looijaard <frodol@dds.nl>,
+ - Philip Edelbrock <phil@netroedge.com>,
+ - Mark Studebaker <mdsxyz123@yahoo.com>
+
+Module parameters
+-----------------
+
+* init int
+ (default 1)
+
+ Use 'init=0' to bypass initializing the chip.
+ Try this if your computer crashes when you load the module.
+
+* reset int
+ (default 0)
+ The driver used to reset the chip on load, but does no more. Use
+ 'reset=1' to restore the old behavior. Report if you need to do this.
+
+force_subclients=bus,caddr,saddr,saddr
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b`
+ to force the subclients of chip 0x2d on bus 0 to i2c addresses
+ 0x4a and 0x4b. This parameter is useful for certain Tyan boards.
+
+Description
+-----------
+
+This driver implements support for the Winbond W83781D, W83782D, W83783S
+chips, and the Asus AS99127F chips. We will refer to them collectively as
+W8378* chips.
+
+There is quite some difference between these chips, but they are similar
+enough that it was sensible to put them together in one driver.
+The Asus chips are similar to an I2C-only W83782D.
+
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| Chip | #vin | #fanin | #pwm | #temp | wchipid | vendid | i2c | ISA |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| as99127f | 7 | 3 | 0 | 3 | 0x31 | 0x12c3 | yes | no |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| as99127f rev.2 (type_name = as99127f) | 0x31 | 0x5ca3 | yes | no |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| w83781d | 7 | 3 | 0 | 3 | 0x10-1 | 0x5ca3 | yes | yes |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| w83782d | 9 | 3 | 2-4 | 3 | 0x30 | 0x5ca3 | yes | yes |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+| w83783s | 5-6 | 3 | 2 | 1-2 | 0x40 | 0x5ca3 | yes | no |
++----------+---------+--------+-------+-------+---------+--------+------+-----+
+
+Detection of these chips can sometimes be foiled because they can be in
+an internal state that allows no clean access. If you know the address
+of the chip, use a 'force' parameter; this will put them into a more
+well-behaved state first.
+
+The W8378* implements temperature sensors (three on the W83781D and W83782D,
+two on the W83783S), three fan rotation speed sensors, voltage sensors
+(seven on the W83781D, nine on the W83782D and six on the W83783S), VID
+lines, alarms with beep warnings, and some miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. There is always one main
+temperature sensor, and one (W83783S) or two (W83781D and W83782D) other
+sensors. An alarm is triggered for the main sensor once when the
+Overtemperature Shutdown limit is crossed; it is triggered again as soon as
+it drops below the Hysteresis value. A more useful behavior
+can be found by setting the Hysteresis value to +127 degrees Celsius; in
+this case, alarms are issued during all the time when the actual temperature
+is above the Overtemperature Shutdown value. The driver sets the
+hysteresis value for temp1 to 127 at initialization.
+
+For the other temperature sensor(s), an alarm is triggered when the
+temperature gets higher then the Overtemperature Shutdown value; it stays
+on until the temperature falls below the Hysteresis value. But on the
+W83781D, there is only one alarm that functions for both other sensors!
+Temperatures are guaranteed within a range of -55 to +125 degrees. The
+main temperature sensors has a resolution of 1 degree; the other sensor(s)
+of 0.5 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8 for the
+W83781D; 1, 2, 4, 8, 16, 32, 64 or 128 for the others) to give
+the readings more range or accuracy. Not all RPM values can accurately
+be represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt.
+
+The VID lines encode the core voltage value: the voltage level your processor
+should work with. This is hardcoded by the mainboard and/or processor itself.
+It is a value in volts. When it is unconnected, you will often find the
+value 3.50 V here.
+
+The W83782D and W83783S temperature conversion machine understands about
+several kinds of temperature probes. You can program the so-called
+beta value in the sensor files. '1' is the PII/Celeron diode, '2' is the
+TN3904 transistor, and 3435 the default thermistor value. Other values
+are (not yet) supported.
+
+In addition to the alarms described above, there is a CHAS alarm on the
+chips which triggers if your computer case is open.
+
+When an alarm goes off, you can be warned by a beeping signal through
+your computer speaker. It is possible to enable all beeping globally,
+or only the beeping for some alarms.
+
+Individual alarm and beep bits:
+
+======== ==========================
+0x000001 in0
+0x000002 in1
+0x000004 in2
+0x000008 in3
+0x000010 temp1
+0x000020 temp2 (+temp3 on W83781D)
+0x000040 fan1
+0x000080 fan2
+0x000100 in4
+0x000200 in5
+0x000400 in6
+0x000800 fan3
+0x001000 chassis
+0x002000 temp3 (W83782D only)
+0x010000 in7 (W83782D only)
+0x020000 in8 (W83782D only)
+======== ==========================
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The chips only update values each 1.5 seconds; reading them more often
+will do no harm, but will return 'old' values.
+
+AS99127F PROBLEMS
+-----------------
+The as99127f support was developed without the benefit of a datasheet.
+In most cases it is treated as a w83781d (although revision 2 of the
+AS99127F looks more like a w83782d).
+This support will be BETA until a datasheet is released.
+One user has reported problems with fans stopping
+occasionally.
+
+Note that the individual beep bits are inverted from the other chips.
+The driver now takes care of this so that user-space applications
+don't have to know about it.
+
+Known problems:
+ - Problems with diode/thermistor settings (supported?)
+ - One user reports fans stopping under high server load.
+ - Revision 2 seems to have 2 PWM registers but we don't know
+ how to handle them. More details below.
+
+These will not be fixed unless we get a datasheet.
+If you have problems, please lobby Asus to release a datasheet.
+Unfortunately several others have without success.
+Please do not send mail to us asking for better as99127f support.
+We have done the best we can without a datasheet.
+Please do not send mail to the author or the sensors group asking for
+a datasheet or ideas on how to convince Asus. We can't help.
+
+
+NOTES
+-----
+ 783s has no in1 so that in[2-6] are compatible with the 781d/782d.
+
+ 783s pin is programmable for -5V or temp1; defaults to -5V,
+ no control in driver so temp1 doesn't work.
+
+ 782d and 783s datasheets differ on which is pwm1 and which is pwm2.
+ We chose to follow 782d.
+
+ 782d and 783s pin is programmable for fan3 input or pwm2 output;
+ defaults to fan3 input.
+ If pwm2 is enabled (with echo 255 1 > pwm2), then
+ fan3 will report 0.
+
+ 782d has pwm1-2 for ISA, pwm1-4 for i2c. (pwm3-4 share pins with
+ the ISA pins)
+
+Data sheet updates
+------------------
+ - PWM clock registers:
+ * 000: master / 512
+ * 001: master / 1024
+ * 010: master / 2048
+ * 011: master / 4096
+ * 100: master / 8192
+
+
+Answers from Winbond tech support
+---------------------------------
+
+::
+
+ >
+ > 1) In the W83781D data sheet section 7.2 last paragraph, it talks about
+ > reprogramming the R-T table if the Beta of the thermistor is not
+ > 3435K. The R-T table is described briefly in section 8.20.
+ > What formulas do I use to program a new R-T table for a given Beta?
+ >
+
+ We are sorry that the calculation for R-T table value is
+ confidential. If you have another Beta value of thermistor, we can help
+ to calculate the R-T table for you. But you should give us real R-T
+ Table which can be gotten by thermistor vendor. Therefore we will calculate
+ them and obtain 32-byte data, and you can fill the 32-byte data to the
+ register in Bank0.CR51 of W83781D.
+
+
+ > 2) In the W83782D data sheet, it mentions that pins 38, 39, and 40 are
+ > programmable to be either thermistor or Pentium II diode inputs.
+ > How do I program them for diode inputs? I can't find any register
+ > to program these to be diode inputs.
+
+ You may program Bank0 CR[5Dh] and CR[59h] registers.
+
+ =============================== =============== ============== ============
+ CR[5Dh] bit 1(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
+
+ thermistor 0 0 0
+ diode 1 1 1
+
+
+ (error) CR[59h] bit 4(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
+ (right) CR[59h] bit 4(VTIN1) bit 5(VTIN2) bit 6(VTIN3)
+
+ PII thermal diode 1 1 1
+ 2N3904 diode 0 0 0
+ =============================== =============== ============== ============
+
+
+Asus Clones
+-----------
+
+We have no datasheets for the Asus clones (AS99127F and ASB100 Bach).
+Here are some very useful information that were given to us by Alex Van
+Kaam about how to detect these chips, and how to read their values. He
+also gives advice for another Asus chipset, the Mozart-2 (which we
+don't support yet). Thanks Alex!
+
+I reworded some parts and added personal comments.
+
+Detection
+^^^^^^^^^
+
+AS99127F rev.1, AS99127F rev.2 and ASB100:
+- I2C address range: 0x29 - 0x2F
+- If register 0x58 holds 0x31 then we have an Asus (either ASB100 or AS99127F)
+- Which one depends on register 0x4F (manufacturer ID):
+
+ - 0x06 or 0x94: ASB100
+ - 0x12 or 0xC3: AS99127F rev.1
+ - 0x5C or 0xA3: AS99127F rev.2
+
+ Note that 0x5CA3 is Winbond's ID (WEC), which let us think Asus get their
+ AS99127F rev.2 direct from Winbond. The other codes mean ATT and DVC,
+ respectively. ATT could stand for Asustek something (although it would be
+ very badly chosen IMHO), I don't know what DVC could stand for. Maybe
+ these codes simply aren't meant to be decoded that way.
+
+Mozart-2:
+- I2C address: 0x77
+- If register 0x58 holds 0x56 or 0x10 then we have a Mozart-2
+- Of the Mozart there are 3 types:
+
+ - 0x58=0x56, 0x4E=0x94, 0x4F=0x36: Asus ASM58 Mozart-2
+ - 0x58=0x56, 0x4E=0x94, 0x4F=0x06: Asus AS2K129R Mozart-2
+ - 0x58=0x10, 0x4E=0x5C, 0x4F=0xA3: Asus ??? Mozart-2
+
+ You can handle all 3 the exact same way :)
+
+Temperature sensors
+^^^^^^^^^^^^^^^^^^^
+
+ASB100:
+ - sensor 1: register 0x27
+ - sensor 2 & 3 are the 2 LM75's on the SMBus
+ - sensor 4: register 0x17
+
+Remark:
+
+ I noticed that on Intel boards sensor 2 is used for the CPU
+ and 4 is ignored/stuck, on AMD boards sensor 4 is the CPU and sensor 2 is
+ either ignored or a socket temperature.
+
+AS99127F (rev.1 and 2 alike):
+ - sensor 1: register 0x27
+ - sensor 2 & 3 are the 2 LM75's on the SMBus
+
+Remark:
+
+ Register 0x5b is suspected to be temperature type selector. Bit 1
+ would control temp1, bit 3 temp2 and bit 5 temp3.
+
+Mozart-2:
+ - sensor 1: register 0x27
+ - sensor 2: register 0x13
+
+Fan sensors
+^^^^^^^^^^^
+
+ASB100, AS99127F (rev.1 and 2 alike):
+ - 3 fans, identical to the W83781D
+
+Mozart-2:
+ - 2 fans only, 1350000/RPM/div
+ - fan 1: register 0x28, divisor on register 0xA1 (bits 4-5)
+ - fan 2: register 0x29, divisor on register 0xA1 (bits 6-7)
+
+Voltages
+^^^^^^^^
+
+This is where there is a difference between AS99127F rev.1 and 2.
+
+Remark:
+
+ The difference is similar to the difference between
+ W83781D and W83782D.
+
+ASB100:
+ - in0=r(0x20)*0.016
+ - in1=r(0x21)*0.016
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*3.8
+ - in5=r(0x25)*(-0.016)*3.97
+ - in6=r(0x26)*(-0.016)*1.666
+
+AS99127F rev.1:
+ - in0=r(0x20)*0.016
+ - in1=r(0x21)*0.016
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*3.8
+ - in5=r(0x25)*(-0.016)*3.97
+ - in6=r(0x26)*(-0.016)*1.503
+
+AS99127F rev.2:
+ - in0=r(0x20)*0.016
+ - in1=r(0x21)*0.016
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*3.8
+ - in5=(r(0x25)*0.016-3.6)*5.14+3.6
+ - in6=(r(0x26)*0.016-3.6)*3.14+3.6
+
+Mozart-2:
+ - in0=r(0x20)*0.016
+ - in1=255
+ - in2=r(0x22)*0.016
+ - in3=r(0x23)*0.016*1.68
+ - in4=r(0x24)*0.016*4
+ - in5=255
+ - in6=255
+
+
+PWM
+^^^
+
+* Additional info about PWM on the AS99127F (may apply to other Asus
+ chips as well) by Jean Delvare as of 2004-04-09:
+
+AS99127F revision 2 seems to have two PWM registers at 0x59 and 0x5A,
+and a temperature sensor type selector at 0x5B (which basically means
+that they swapped registers 0x59 and 0x5B when you compare with Winbond
+chips).
+Revision 1 of the chip also has the temperature sensor type selector at
+0x5B, but PWM registers have no effect.
+
+We don't know exactly how the temperature sensor type selection works.
+Looks like bits 1-0 are for temp1, bits 3-2 for temp2 and bits 5-4 for
+temp3, although it is possible that only the most significant bit matters
+each time. So far, values other than 0 always broke the readings.
+
+PWM registers seem to be split in two parts: bit 7 is a mode selector,
+while the other bits seem to define a value or threshold.
+
+When bit 7 is clear, bits 6-0 seem to hold a threshold value. If the value
+is below a given limit, the fan runs at low speed. If the value is above
+the limit, the fan runs at full speed. We have no clue as to what the limit
+represents. Note that there seem to be some inertia in this mode, speed
+changes may need some time to trigger. Also, an hysteresis mechanism is
+suspected since walking through all the values increasingly and then
+decreasingly led to slightly different limits.
+
+When bit 7 is set, bits 3-0 seem to hold a threshold value, while bits 6-4
+would not be significant. If the value is below a given limit, the fan runs
+at full speed, while if it is above the limit it runs at low speed (so this
+is the contrary of the other mode, in a way). Here again, we don't know
+what the limit is supposed to represent.
+
+One remarkable thing is that the fans would only have two or three
+different speeds (transitional states left apart), not a whole range as
+you usually get with PWM.
+
+As a conclusion, you can write 0x00 or 0x8F to the PWM registers to make
+fans run at low speed, and 0x7F or 0x80 to make them run at full speed.
+
+Please contact us if you can figure out how it is supposed to work. As
+long as we don't know more, the w83781d driver doesn't handle PWM on
+AS99127F chips at all.
+
+* Additional info about PWM on the AS99127F rev.1 by Hector Martin:
+
+I've been fiddling around with the (in)famous 0x59 register and
+found out the following values do work as a form of coarse pwm:
+
+0x80
+ - seems to turn fans off after some time(1-2 minutes)... might be
+ some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an
+ old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attempt at Qfan
+ that was dropped at the BIOS)
+0x81
+ - off
+0x82
+ - slightly "on-ner" than off, but my fans do not get to move. I can
+ hear the high-pitched PWM sound that motors give off at too-low-pwm.
+0x83
+ - now they do move. Estimate about 70% speed or so.
+0x84-0x8f
+ - full on
+
+Changing the high nibble doesn't seem to do much except the high bit
+(0x80) must be set for PWM to work, else the current pwm doesn't seem to
+change.
+
+My mobo is an ASUS A7V266-E. This behavior is similar to what I got
+with speedfan under Windows, where 0-15% would be off, 15-2x% (can't
+remember the exact value) would be 70% and higher would be full on.
+
+* Additional info about PWM on the AS99127F rev.1 from lm-sensors
+ ticket #2350:
+
+I conducted some experiment on Asus P3B-F motherboard with AS99127F
+(Ver. 1).
+
+I confirm that 0x59 register control the CPU_Fan Header on this
+motherboard, and 0x5a register control PWR_Fan.
+
+In order to reduce the dependency of specific fan, the measurement is
+conducted with a digital scope without fan connected. I found out that
+P3B-F actually output variable DC voltage on fan header center pin,
+looks like PWM is filtered on this motherboard.
+
+Here are some of measurements:
+
+==== =========
+0x80 20 mV
+0x81 20 mV
+0x82 232 mV
+0x83 1.2 V
+0x84 2.31 V
+0x85 3.44 V
+0x86 4.62 V
+0x87 5.81 V
+0x88 7.01 V
+9x89 8.22 V
+0x8a 9.42 V
+0x8b 10.6 V
+0x8c 11.9 V
+0x8d 12.4 V
+0x8e 12.4 V
+0x8f 12.4 V
+==== =========