summaryrefslogtreecommitdiffstats
path: root/arch/arm/common/locomo.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /arch/arm/common/locomo.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/common/locomo.c')
-rw-r--r--arch/arm/common/locomo.c884
1 files changed, 884 insertions, 0 deletions
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
new file mode 100644
index 000000000..da30a4d4f
--- /dev/null
+++ b/arch/arm/common/locomo.c
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/common/locomo.c
+ *
+ * Sharp LoCoMo support
+ *
+ * This file contains all generic LoCoMo support.
+ *
+ * All initialization functions provided here are intended to be called
+ * from machine specific code with proper arguments when required.
+ *
+ * Based on sa1111.c
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware/locomo.h>
+
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY (0)
+#define IRQ_LOCOMO_GPIO (1)
+#define IRQ_LOCOMO_LT (2)
+#define IRQ_LOCOMO_SPI (3)
+
+/* M62332 output channel selection */
+#define M62332_EVR_CH 1 /* M62332 volume channel number */
+ /* 0 : CH.1 , 1 : CH. 2 */
+/* DAC send data */
+#define M62332_SLAVE_ADDR 0x4e /* Slave address */
+#define M62332_W_BIT 0x00 /* W bit (0 only) */
+#define M62332_SUB_ADDR 0x00 /* Sub address */
+#define M62332_A_BIT 0x00 /* A bit (0 only) */
+
+/* DAC setup and hold times (expressed in us) */
+#define DAC_BUS_FREE_TIME 5 /* 4.7 us */
+#define DAC_START_SETUP_TIME 5 /* 4.7 us */
+#define DAC_STOP_SETUP_TIME 4 /* 4.0 us */
+#define DAC_START_HOLD_TIME 5 /* 4.7 us */
+#define DAC_SCL_LOW_HOLD_TIME 5 /* 4.7 us */
+#define DAC_SCL_HIGH_HOLD_TIME 4 /* 4.0 us */
+#define DAC_DATA_SETUP_TIME 1 /* 250 ns */
+#define DAC_DATA_HOLD_TIME 1 /* 300 ns */
+#define DAC_LOW_SETUP_TIME 1 /* 300 ns */
+#define DAC_HIGH_SETUP_TIME 1 /* 1000 ns */
+
+/* the following is the overall data for the locomo chip */
+struct locomo {
+ struct device *dev;
+ unsigned long phys;
+ unsigned int irq;
+ int irq_base;
+ spinlock_t lock;
+ void __iomem *base;
+#ifdef CONFIG_PM
+ void *saved_state;
+#endif
+};
+
+struct locomo_dev_info {
+ unsigned long offset;
+ unsigned long length;
+ unsigned int devid;
+ unsigned int irq[1];
+ const char * name;
+};
+
+/* All the locomo devices. If offset is non-zero, the mapbase for the
+ * locomo_dev will be set to the chip base plus offset. If offset is
+ * zero, then the mapbase for the locomo_dev will be set to zero. An
+ * offset of zero means the device only uses GPIOs or other helper
+ * functions inside this file */
+static struct locomo_dev_info locomo_devices[] = {
+ {
+ .devid = LOCOMO_DEVID_KEYBOARD,
+ .irq = { IRQ_LOCOMO_KEY },
+ .name = "locomo-keyboard",
+ .offset = LOCOMO_KEYBOARD,
+ .length = 16,
+ },
+ {
+ .devid = LOCOMO_DEVID_FRONTLIGHT,
+ .irq = {},
+ .name = "locomo-frontlight",
+ .offset = LOCOMO_FRONTLIGHT,
+ .length = 8,
+
+ },
+ {
+ .devid = LOCOMO_DEVID_BACKLIGHT,
+ .irq = {},
+ .name = "locomo-backlight",
+ .offset = LOCOMO_BACKLIGHT,
+ .length = 8,
+ },
+ {
+ .devid = LOCOMO_DEVID_AUDIO,
+ .irq = {},
+ .name = "locomo-audio",
+ .offset = LOCOMO_AUDIO,
+ .length = 4,
+ },
+ {
+ .devid = LOCOMO_DEVID_LED,
+ .irq = {},
+ .name = "locomo-led",
+ .offset = LOCOMO_LED,
+ .length = 8,
+ },
+ {
+ .devid = LOCOMO_DEVID_UART,
+ .irq = {},
+ .name = "locomo-uart",
+ .offset = 0,
+ .length = 0,
+ },
+ {
+ .devid = LOCOMO_DEVID_SPI,
+ .irq = {},
+ .name = "locomo-spi",
+ .offset = LOCOMO_SPI,
+ .length = 0x30,
+ },
+};
+
+static void locomo_handler(struct irq_desc *desc)
+{
+ struct locomo *lchip = irq_desc_get_handler_data(desc);
+ int req, i;
+
+ /* Acknowledge the parent IRQ */
+ desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+ /* check why this interrupt was generated */
+ req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
+
+ if (req) {
+ unsigned int irq;
+
+ /* generate the next interrupt(s) */
+ irq = lchip->irq_base;
+ for (i = 0; i <= 3; i++, irq++) {
+ if (req & (0x0100 << i)) {
+ generic_handle_irq(irq);
+ }
+
+ }
+ }
+}
+
+static void locomo_ack_irq(struct irq_data *d)
+{
+}
+
+static void locomo_mask_irq(struct irq_data *d)
+{
+ struct locomo *lchip = irq_data_get_irq_chip_data(d);
+ unsigned int r;
+ r = locomo_readl(lchip->base + LOCOMO_ICR);
+ r &= ~(0x0010 << (d->irq - lchip->irq_base));
+ locomo_writel(r, lchip->base + LOCOMO_ICR);
+}
+
+static void locomo_unmask_irq(struct irq_data *d)
+{
+ struct locomo *lchip = irq_data_get_irq_chip_data(d);
+ unsigned int r;
+ r = locomo_readl(lchip->base + LOCOMO_ICR);
+ r |= (0x0010 << (d->irq - lchip->irq_base));
+ locomo_writel(r, lchip->base + LOCOMO_ICR);
+}
+
+static struct irq_chip locomo_chip = {
+ .name = "LOCOMO",
+ .irq_ack = locomo_ack_irq,
+ .irq_mask = locomo_mask_irq,
+ .irq_unmask = locomo_unmask_irq,
+};
+
+static void locomo_setup_irq(struct locomo *lchip)
+{
+ int irq = lchip->irq_base;
+
+ /*
+ * Install handler for IRQ_LOCOMO_HW.
+ */
+ irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
+ irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
+
+ /* Install handlers for IRQ_LOCOMO_* */
+ for ( ; irq <= lchip->irq_base + 3; irq++) {
+ irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq);
+ irq_set_chip_data(irq, lchip);
+ irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+ }
+}
+
+
+static void locomo_dev_release(struct device *_dev)
+{
+ struct locomo_dev *dev = LOCOMO_DEV(_dev);
+
+ kfree(dev);
+}
+
+static int
+locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
+{
+ struct locomo_dev *dev;
+ int ret;
+
+ dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
+ if (!dev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * If the parent device has a DMA mask associated with it,
+ * propagate it down to the children.
+ */
+ if (lchip->dev->dma_mask) {
+ dev->dma_mask = *lchip->dev->dma_mask;
+ dev->dev.dma_mask = &dev->dma_mask;
+ }
+
+ dev_set_name(&dev->dev, "%s", info->name);
+ dev->devid = info->devid;
+ dev->dev.parent = lchip->dev;
+ dev->dev.bus = &locomo_bus_type;
+ dev->dev.release = locomo_dev_release;
+ dev->dev.coherent_dma_mask = lchip->dev->coherent_dma_mask;
+
+ if (info->offset)
+ dev->mapbase = lchip->base + info->offset;
+ else
+ dev->mapbase = 0;
+ dev->length = info->length;
+
+ dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
+ NO_IRQ : lchip->irq_base + info->irq[0];
+
+ ret = device_register(&dev->dev);
+ if (ret) {
+ out:
+ kfree(dev);
+ }
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+struct locomo_save_data {
+ u16 LCM_GPO;
+ u16 LCM_SPICT;
+ u16 LCM_GPE;
+ u16 LCM_ASD;
+ u16 LCM_SPIMD;
+};
+
+static int locomo_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct locomo *lchip = platform_get_drvdata(dev);
+ struct locomo_save_data *save;
+ unsigned long flags;
+
+ save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
+ if (!save)
+ return -ENOMEM;
+
+ lchip->saved_state = save;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+
+ save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
+ locomo_writel(0x00, lchip->base + LOCOMO_GPO);
+ save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
+ locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
+ save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
+ locomo_writel(0x00, lchip->base + LOCOMO_GPE);
+ save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
+ locomo_writel(0x00, lchip->base + LOCOMO_ASD);
+ save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */
+ locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
+
+ locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
+ locomo_writel(0x00, lchip->base + LOCOMO_DAC);
+ locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
+
+ if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
+ locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */
+ else
+ /* 18MHz already enabled, so no wait */
+ locomo_writel(0xc1, lchip->base + LOCOMO_C32K); /* CLK32 on */
+
+ locomo_writel(0x00, lchip->base + LOCOMO_TADC); /* 18MHz clock off*/
+ locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC); /* 22MHz/24MHz clock off */
+ locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS); /* FL */
+
+ spin_unlock_irqrestore(&lchip->lock, flags);
+
+ return 0;
+}
+
+static int locomo_resume(struct platform_device *dev)
+{
+ struct locomo *lchip = platform_get_drvdata(dev);
+ struct locomo_save_data *save;
+ unsigned long r;
+ unsigned long flags;
+
+ save = lchip->saved_state;
+ if (!save)
+ return 0;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+
+ locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
+ locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
+ locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
+ locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
+ locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
+
+ locomo_writel(0x00, lchip->base + LOCOMO_C32K);
+ locomo_writel(0x90, lchip->base + LOCOMO_TADC);
+
+ locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC);
+ r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+ r &= 0xFEFF;
+ locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+ locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
+
+ spin_unlock_irqrestore(&lchip->lock, flags);
+
+ lchip->saved_state = NULL;
+ kfree(save);
+
+ return 0;
+}
+#endif
+
+
+/**
+ * locomo_probe - probe for a single LoCoMo chip.
+ * @phys_addr: physical address of device.
+ *
+ * Probe for a LoCoMo chip. This must be called
+ * before any other locomo-specific code.
+ *
+ * Returns:
+ * %-ENODEV device not found.
+ * %-EBUSY physical address already marked in-use.
+ * %0 successful.
+ */
+static int
+__locomo_probe(struct device *me, struct resource *mem, int irq)
+{
+ struct locomo_platform_data *pdata = me->platform_data;
+ struct locomo *lchip;
+ unsigned long r;
+ int i, ret = -ENODEV;
+
+ lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
+ if (!lchip)
+ return -ENOMEM;
+
+ spin_lock_init(&lchip->lock);
+
+ lchip->dev = me;
+ dev_set_drvdata(lchip->dev, lchip);
+
+ lchip->phys = mem->start;
+ lchip->irq = irq;
+ lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
+
+ /*
+ * Map the whole region. This also maps the
+ * registers for our children.
+ */
+ lchip->base = ioremap(mem->start, PAGE_SIZE);
+ if (!lchip->base) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /* locomo initialize */
+ locomo_writel(0, lchip->base + LOCOMO_ICR);
+ /* KEYBOARD */
+ locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+
+ /* GPIO */
+ locomo_writel(0, lchip->base + LOCOMO_GPO);
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ , lchip->base + LOCOMO_GPE);
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ , lchip->base + LOCOMO_GPD);
+ locomo_writel(0, lchip->base + LOCOMO_GIE);
+
+ /* Frontlight */
+ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+ locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+
+ /* Longtime timer */
+ locomo_writel(0, lchip->base + LOCOMO_LTINT);
+ /* SPI */
+ locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
+
+ locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
+ r = locomo_readl(lchip->base + LOCOMO_ASD);
+ r |= 0x8000;
+ locomo_writel(r, lchip->base + LOCOMO_ASD);
+
+ locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD);
+ r = locomo_readl(lchip->base + LOCOMO_HSD);
+ r |= 0x8000;
+ locomo_writel(r, lchip->base + LOCOMO_HSD);
+
+ locomo_writel(128 / 8, lchip->base + LOCOMO_HSC);
+
+ /* XON */
+ locomo_writel(0x80, lchip->base + LOCOMO_TADC);
+ udelay(1000);
+ /* CLK9MEN */
+ r = locomo_readl(lchip->base + LOCOMO_TADC);
+ r |= 0x10;
+ locomo_writel(r, lchip->base + LOCOMO_TADC);
+ udelay(100);
+
+ /* init DAC */
+ r = locomo_readl(lchip->base + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
+ locomo_writel(r, lchip->base + LOCOMO_DAC);
+
+ r = locomo_readl(lchip->base + LOCOMO_VER);
+ printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff));
+
+ /*
+ * The interrupt controller must be initialised before any
+ * other device to ensure that the interrupts are available.
+ */
+ if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
+ locomo_setup_irq(lchip);
+
+ for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
+ locomo_init_one_child(lchip, &locomo_devices[i]);
+ return 0;
+
+ out:
+ kfree(lchip);
+ return ret;
+}
+
+static int locomo_remove_child(struct device *dev, void *data)
+{
+ device_unregister(dev);
+ return 0;
+}
+
+static void __locomo_remove(struct locomo *lchip)
+{
+ device_for_each_child(lchip->dev, NULL, locomo_remove_child);
+
+ if (lchip->irq != NO_IRQ) {
+ irq_set_chained_handler_and_data(lchip->irq, NULL, NULL);
+ }
+
+ iounmap(lchip->base);
+ kfree(lchip);
+}
+
+static int locomo_probe(struct platform_device *dev)
+{
+ struct resource *mem;
+ int irq;
+
+ mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -EINVAL;
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ return __locomo_probe(&dev->dev, mem, irq);
+}
+
+static int locomo_remove(struct platform_device *dev)
+{
+ struct locomo *lchip = platform_get_drvdata(dev);
+
+ if (lchip) {
+ __locomo_remove(lchip);
+ platform_set_drvdata(dev, NULL);
+ }
+
+ return 0;
+}
+
+/*
+ * Not sure if this should be on the system bus or not yet.
+ * We really want some way to register a system device at
+ * the per-machine level, and then have this driver pick
+ * up the registered devices.
+ */
+static struct platform_driver locomo_device_driver = {
+ .probe = locomo_probe,
+ .remove = locomo_remove,
+#ifdef CONFIG_PM
+ .suspend = locomo_suspend,
+ .resume = locomo_resume,
+#endif
+ .driver = {
+ .name = "locomo",
+ },
+};
+
+/*
+ * Get the parent device driver (us) structure
+ * from a child function device
+ */
+static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev)
+{
+ return (struct locomo *)dev_get_drvdata(ldev->dev.parent);
+}
+
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir)
+{
+ struct locomo *lchip = dev_get_drvdata(dev);
+ unsigned long flags;
+ unsigned int r;
+
+ if (!lchip)
+ return;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+
+ r = locomo_readl(lchip->base + LOCOMO_GPD);
+ if (dir)
+ r |= bits;
+ else
+ r &= ~bits;
+ locomo_writel(r, lchip->base + LOCOMO_GPD);
+
+ r = locomo_readl(lchip->base + LOCOMO_GPE);
+ if (dir)
+ r |= bits;
+ else
+ r &= ~bits;
+ locomo_writel(r, lchip->base + LOCOMO_GPE);
+
+ spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_gpio_set_dir);
+
+int locomo_gpio_read_level(struct device *dev, unsigned int bits)
+{
+ struct locomo *lchip = dev_get_drvdata(dev);
+ unsigned long flags;
+ unsigned int ret;
+
+ if (!lchip)
+ return -ENODEV;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+ ret = locomo_readl(lchip->base + LOCOMO_GPL);
+ spin_unlock_irqrestore(&lchip->lock, flags);
+
+ ret &= bits;
+ return ret;
+}
+EXPORT_SYMBOL(locomo_gpio_read_level);
+
+int locomo_gpio_read_output(struct device *dev, unsigned int bits)
+{
+ struct locomo *lchip = dev_get_drvdata(dev);
+ unsigned long flags;
+ unsigned int ret;
+
+ if (!lchip)
+ return -ENODEV;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+ ret = locomo_readl(lchip->base + LOCOMO_GPO);
+ spin_unlock_irqrestore(&lchip->lock, flags);
+
+ ret &= bits;
+ return ret;
+}
+EXPORT_SYMBOL(locomo_gpio_read_output);
+
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
+{
+ struct locomo *lchip = dev_get_drvdata(dev);
+ unsigned long flags;
+ unsigned int r;
+
+ if (!lchip)
+ return;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+
+ r = locomo_readl(lchip->base + LOCOMO_GPO);
+ if (set)
+ r |= bits;
+ else
+ r &= ~bits;
+ locomo_writel(r, lchip->base + LOCOMO_GPO);
+
+ spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_gpio_write);
+
+static void locomo_m62332_sendbit(void *mapbase, int bit)
+{
+ unsigned int r;
+
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SCLOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SCLOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
+
+ if (bit & 1) {
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SDAOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ } else {
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SDAOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ }
+
+ udelay(DAC_DATA_SETUP_TIME); /* 250 nsec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */
+}
+
+void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel)
+{
+ struct locomo *lchip = locomo_chip_driver(ldev);
+ int i;
+ unsigned char data;
+ unsigned int r;
+ void *mapbase = lchip->base;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lchip->lock, flags);
+
+ /* Start */
+ udelay(DAC_BUS_FREE_TIME); /* 5.0 usec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.0 usec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SDAOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_START_HOLD_TIME); /* 5.0 usec */
+ udelay(DAC_DATA_HOLD_TIME); /* 300 nsec */
+
+ /* Send slave address and W bit (LSB is W bit) */
+ data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT;
+ for (i = 1; i <= 8; i++) {
+ locomo_m62332_sendbit(mapbase, data >> (8 - i));
+ }
+
+ /* Check A bit */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SCLOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SDAOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
+ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
+ printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
+ goto out;
+ }
+
+ /* Send Sub address (LSB is channel select) */
+ /* channel = 0 : ch1 select */
+ /* = 1 : ch2 select */
+ data = M62332_SUB_ADDR + channel;
+ for (i = 1; i <= 8; i++) {
+ locomo_m62332_sendbit(mapbase, data >> (8 - i));
+ }
+
+ /* Check A bit */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SCLOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SDAOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
+ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
+ printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
+ goto out;
+ }
+
+ /* Send DAC data */
+ for (i = 1; i <= 8; i++) {
+ locomo_m62332_sendbit(mapbase, dac_data >> (8 - i));
+ }
+
+ /* Check A bit */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SCLOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SDAOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
+ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
+ printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
+ }
+
+out:
+ /* stop */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r &= ~(LOCOMO_DAC_SCLOEB);
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 300 nsec */
+ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SDAOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_HIGH_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4 usec */
+
+ r = locomo_readl(mapbase + LOCOMO_DAC);
+ r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
+ locomo_writel(r, mapbase + LOCOMO_DAC);
+ udelay(DAC_LOW_SETUP_TIME); /* 1000 nsec */
+ udelay(DAC_SCL_LOW_HOLD_TIME); /* 4.7 usec */
+
+ spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_m62332_senddata);
+
+/*
+ * Frontlight control
+ */
+
+void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
+{
+ unsigned long flags;
+ struct locomo *lchip = locomo_chip_driver(dev);
+
+ if (vr)
+ locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
+ else
+ locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
+
+ spin_lock_irqsave(&lchip->lock, flags);
+ locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+ udelay(100);
+ locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+ locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+ spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_frontlight_set);
+
+/*
+ * LoCoMo "Register Access Bus."
+ *
+ * We model this as a regular bus type, and hang devices directly
+ * off this.
+ */
+static int locomo_match(struct device *_dev, struct device_driver *_drv)
+{
+ struct locomo_dev *dev = LOCOMO_DEV(_dev);
+ struct locomo_driver *drv = LOCOMO_DRV(_drv);
+
+ return dev->devid == drv->devid;
+}
+
+static int locomo_bus_probe(struct device *dev)
+{
+ struct locomo_dev *ldev = LOCOMO_DEV(dev);
+ struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
+ int ret = -ENODEV;
+
+ if (drv->probe)
+ ret = drv->probe(ldev);
+ return ret;
+}
+
+static void locomo_bus_remove(struct device *dev)
+{
+ struct locomo_dev *ldev = LOCOMO_DEV(dev);
+ struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
+
+ if (drv->remove)
+ drv->remove(ldev);
+}
+
+struct bus_type locomo_bus_type = {
+ .name = "locomo-bus",
+ .match = locomo_match,
+ .probe = locomo_bus_probe,
+ .remove = locomo_bus_remove,
+};
+
+int locomo_driver_register(struct locomo_driver *driver)
+{
+ driver->drv.bus = &locomo_bus_type;
+ return driver_register(&driver->drv);
+}
+EXPORT_SYMBOL(locomo_driver_register);
+
+void locomo_driver_unregister(struct locomo_driver *driver)
+{
+ driver_unregister(&driver->drv);
+}
+EXPORT_SYMBOL(locomo_driver_unregister);
+
+static int __init locomo_init(void)
+{
+ int ret = bus_register(&locomo_bus_type);
+ if (ret == 0)
+ platform_driver_register(&locomo_device_driver);
+ return ret;
+}
+
+static void __exit locomo_exit(void)
+{
+ platform_driver_unregister(&locomo_device_driver);
+ bus_unregister(&locomo_bus_type);
+}
+
+module_init(locomo_init);
+module_exit(locomo_exit);
+
+MODULE_DESCRIPTION("Sharp LoCoMo core driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");