Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 232 insertions, 0 deletions

diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
new file mode 100644
index 000000000..ac130aba5
--- /dev/null
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-iop32x/em7210.c
+ *
+ * Board support code for the Lanner EM7210 platforms.
+ *
+ * Based on arch/arm/mach-iop32x/iq31244.c file.
+ *
+ * Copyright (C) 2007 Arnaud Patard <arnaud.patard@rtp-net.org>
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
+
+#include "hardware.h"
+#include "gpio-iop32x.h"
+#include "irqs.h"
+
+static void __init em7210_timer_init(void)
+{
+	/* http://www.kwaak.net/fotos/fotos-nas/slide_24.html */
+	/* 33.333 MHz crystal.                                */
+	iop_init_time(200000000);
+}
+
+/*
+ * EM7210 RTC
+ */
+static struct i2c_board_info __initdata em7210_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372a", 0x32),
+	},
+};
+
+/*
+ * EM7210 I/O
+ */
+static struct map_desc em7210_io_desc[] __initdata = {
+	{	/* on-board devices */
+		.virtual	= IQ31244_UART,
+		.pfn		= __phys_to_pfn(IQ31244_UART),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init em7210_map_io(void)
+{
+	iop3xx_map_io();
+	iotable_init(em7210_io_desc, ARRAY_SIZE(em7210_io_desc));
+}
+
+
+/*
+ * EM7210 PCI
+ */
+#define INTA	IRQ_IOP32X_XINT0
+#define INTB	IRQ_IOP32X_XINT1
+#define INTC	IRQ_IOP32X_XINT2
+#define INTD	IRQ_IOP32X_XINT3
+
+static int __init
+em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[][4] = {
+		/*
+		 * PCI IDSEL/INTPIN->INTLINE
+		 * A       B       C       D
+		 */
+		{INTB, INTB, INTB, INTB}, /* console / uart */
+		{INTA, INTA, INTA, INTA}, /* 1st 82541      */
+		{INTD, INTD, INTD, INTD}, /* 2nd 82541      */
+		{INTC, INTC, INTC, INTC}, /* GD31244        */
+		{INTD, INTA, INTA, INTA}, /* mini-PCI       */
+		{INTD, INTC, INTA, INTA}, /* NEC USB        */
+	};
+
+	if (pin < 1 || pin > 4)
+		return -1;
+
+	return pci_irq_table[slot % 6][pin - 1];
+}
+
+static struct hw_pci em7210_pci __initdata = {
+	.nr_controllers = 1,
+	.ops		= &iop3xx_ops,
+	.setup		= iop3xx_pci_setup,
+	.preinit	= iop3xx_pci_preinit,
+	.map_irq	= em7210_pci_map_irq,
+};
+
+static int __init em7210_pci_init(void)
+{
+	if (machine_is_em7210())
+		pci_common_init(&em7210_pci);
+
+	return 0;
+}
+
+subsys_initcall(em7210_pci_init);
+
+
+/*
+ * EM7210 Flash
+ */
+static struct physmap_flash_data em7210_flash_data = {
+	.width		= 2,
+};
+
+static struct resource em7210_flash_resource = {
+	.start		= 0xf0000000,
+	.end		= 0xf1ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device em7210_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &em7210_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &em7210_flash_resource,
+};
+
+
+/*
+ * EM7210 UART
+ * The physical address of the serial port is 0xfe800000,
+ * so it can be used for physical and virtual address.
+ */
+static struct plat_serial8250_port em7210_serial_port[] = {
+	{
+		.mapbase	= IQ31244_UART,
+		.membase	= (char *)IQ31244_UART,
+		.irq		= IRQ_IOP32X_XINT1,
+		.flags		= UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 0,
+		.uartclk	= 1843200,
+	},
+	{ },
+};
+
+static struct resource em7210_uart_resource = {
+	.start		= IQ31244_UART,
+	.end		= IQ31244_UART + 7,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device em7210_serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+		.platform_data		= em7210_serial_port,
+	},
+	.num_resources	= 1,
+	.resource	= &em7210_uart_resource,
+};
+
+#define EM7210_HARDWARE_POWER 0
+
+void em7210_power_off(void)
+{
+	int ret;
+
+	ret = gpio_direction_output(EM7210_HARDWARE_POWER, 1);
+	if (ret)
+		pr_crit("could not drive power off GPIO high\n");
+}
+
+static int __init em7210_request_gpios(void)
+{
+	int ret;
+
+	if (!machine_is_em7210())
+		return 0;
+
+	ret = gpio_request(EM7210_HARDWARE_POWER, "power");
+	if (ret) {
+		pr_err("could not request power off GPIO\n");
+		return 0;
+	}
+
+	pm_power_off = em7210_power_off;
+
+	return 0;
+}
+device_initcall(em7210_request_gpios);
+
+static void __init em7210_init_machine(void)
+{
+	register_iop32x_gpio();
+	platform_device_register(&em7210_serial_device);
+	gpiod_add_lookup_table(&iop3xx_i2c0_gpio_lookup);
+	gpiod_add_lookup_table(&iop3xx_i2c1_gpio_lookup);
+	platform_device_register(&iop3xx_i2c0_device);
+	platform_device_register(&iop3xx_i2c1_device);
+	platform_device_register(&em7210_flash_device);
+	platform_device_register(&iop3xx_dma_0_channel);
+	platform_device_register(&iop3xx_dma_1_channel);
+
+	i2c_register_board_info(0, em7210_i2c_devices,
+		ARRAY_SIZE(em7210_i2c_devices));
+}
+
+MACHINE_START(EM7210, "Lanner EM7210")
+	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
+	.map_io		= em7210_map_io,
+	.init_irq	= iop32x_init_irq,
+	.init_time	= em7210_timer_init,
+	.init_machine	= em7210_init_machine,
+	.restart	= iop3xx_restart,
+MACHINE_END