summaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi')
-rw-r--r--arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi1663
1 files changed, 1663 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
new file mode 100644
index 000000000..eae22e6e9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -0,0 +1,1663 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Trogdor device tree source (common between revisions)
+ *
+ * Copyright 2019 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/sc7180-lpass.h>
+
+#include "sc7180.dtsi"
+/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */
+#include "pm6150.dtsi"
+#include "pm6150l.dtsi"
+
+/ {
+ thermal-zones {
+ charger_thermal: charger-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm6150_adc_tm 0>;
+
+ trips {
+ charger-crit {
+ temperature = <125000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the board dts.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &aop_mem;
+/delete-node/ &sec_apps_mem;
+/delete-node/ &tz_mem;
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+ reg = <0x0 0x94600000 0x0 0x800000>;
+};
+
+/ {
+ reserved-memory {
+ atf_mem: memory@80b00000 {
+ reg = <0x0 0x80b00000 0x0 0x100000>;
+ no-map;
+ };
+
+ mpss_mem: memory@86000000 {
+ reg = <0x0 0x86000000 0x0 0x2000000>;
+ no-map;
+ };
+
+ venus_mem: memory@8f600000 {
+ reg = <0 0x8f600000 0 0x500000>;
+ no-map;
+ };
+
+ wlan_mem: memory@94100000 {
+ reg = <0x0 0x94100000 0x0 0x200000>;
+ no-map;
+ };
+
+ mba_mem: memory@94400000 {
+ reg = <0x0 0x94400000 0x0 0x200000>;
+ no-map;
+ };
+ };
+
+ aliases {
+ bluetooth0 = &bluetooth;
+ hsuart0 = &uart3;
+ serial0 = &uart8;
+ wifi0 = &wifi;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ /* FIXED REGULATORS - parents above children */
+
+ /* This is the top level supply and variable voltage */
+ ppvar_sys: ppvar-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* This divides ppvar_sys by 2, so voltage is variable */
+ src_vph_pwr: src-vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "src_vph_pwr";
+
+ /* EC turns on with switchcap_on; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp5000_a: pp5000-a-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp5000_a";
+
+ /* EC turns on with en_pp5000_a; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300_a: pp3300-a-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_a";
+
+ /* EC turns on with en_pp3300_a; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ /*
+ * Actually should be pp3300 but that's practically an alias for
+ * pp3300_a so we use pp3300's vin-supply here to avoid one more
+ * node.
+ */
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp1800_ec:
+ pp1800_sensors:
+ pp1800_ldo: pp1800-ldo-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_ldo";
+
+ /* EC turns on with hibernate_l; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ /*
+ * Actually should be pp1800_h1 but we don't have any need to
+ * model that so we use the parent of pp1800_h1.
+ */
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp1800_uf_cam: pp1800-uf-cam-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_uf_cam";
+ status = "disabled";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uf_cam_en>;
+
+ vin-supply = <&pp1800_ldo>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ pp1800_wf_cam: pp1800-wf-cam-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp1800_wf_cam";
+ status = "disabled";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wf_cam_en>;
+
+ vin-supply = <&pp1800_ldo>;
+ regulator-enable-ramp-delay = <1000>;
+ };
+
+ pp2800_uf_cam: pp2800-uf-cam-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp2800_uf_cam";
+ status = "disabled";
+
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+
+ gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /*
+ * The pinconf can only be referenced once so we put it on the
+ * first regulator and comment it out here.
+ * pinctrl-names = "default";
+ * pinctrl-0 = <&uf_cam_en>;
+ */
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp2800_vcm_wf_cam:
+ pp2800_wf_cam: pp2800-wf-cam-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp2800_wf_cam";
+ status = "disabled";
+
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+
+ gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ /*
+ * The pinconf can only be referenced once so we put it on the
+ * first regulator and comment it out here.
+ * pinctrl-names = "default";
+ * pinctrl-0 = <&wf_cam_en>;
+ */
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp3300_audio:
+ pp3300_codec: pp3300-codec-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_codec";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_codec>;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp3300_dx_edp:
+ pp3300_ts: pp3300-dx-edp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_dx_edp";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_dx_edp>;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp3300_fp_tp: pp3300-fp-tp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_fp_tp";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ /* AP turns on with PP1800_VIO_OUT; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ pp3300_hub: pp3300-hub-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_hub";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_hub>;
+
+ /* The BIOS leaves this regulator on */
+ regulator-boot-on;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ /* The panels don't seem to like anything below ~ 5% */
+ brightness-levels = <
+ 196 256 324 400 484 576 676 784 900 1024 1156 1296
+ 1444 1600 1764 1936 2116 2304 2500 2704 2916 3136
+ 3364 3600 3844 4096
+ >;
+ num-interpolated-steps = <64>;
+ default-brightness-level = <951>;
+
+ pwms = <&cros_ec_pwm 1>;
+ enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+ power-supply = <&ppvar_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_edp_bklten>;
+ };
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_pdct_l>;
+
+ pen_insert: switch-pen-insert {
+ label = "Pen Insert";
+
+ /* Insert = low, eject = high */
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_PEN_INSERTED>;
+ linux,input-type = <EV_SW>;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ wakeup-source;
+ };
+ };
+
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&amp_en>;
+ sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+ keyboard_backlight: keyboard-backlight {
+ status = "disabled";
+ label = "cros_ec::kbd_backlight";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
+ pwms = <&cros_ec_pwm 0>;
+ max-brightness = <1023>;
+ };
+ };
+
+ sound: sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682-max98357a-1mic";
+
+ audio-routing =
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MultiMedia0";
+ reg = <MI2S_PRIMARY>;
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+ };
+
+ sound_multimedia0_codec: codec {
+ sound-dai = <&alc5682 0 /* aif1 */>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "MultiMedia1";
+ reg = <MI2S_SECONDARY>;
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ sound_multimedia1_codec: codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@5 {
+ link-name = "MultiMedia2";
+ reg = <LPASS_DP_RX>;
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+ };
+};
+
+&qfprom {
+ vcc-supply = <&pp1800_l11a>;
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ spi-max-frequency = <37500000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+};
+
+&apps_rsc {
+ pm6150-rpmh-regulators {
+ compatible = "qcom,pm6150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vddpx_1:
+ vdd2:
+ pp1125_s1a: smps1 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vdd_qlink_lv:
+ vdd_qlink_lv_ck:
+ vdd_qusb_hs0_core:
+ vdd_ufs1_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_csi3_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_pll_cc_ebi01:
+ vdda_qrefs_0p9:
+ vdda_usb_ss_dp_core:
+ pp900_l4a: ldo4 {
+ regulator-min-microvolt = <824000>;
+ regulator-max-microvolt = <928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_cx_wlan:
+ pp800_l9a: ldo9 {
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd1:
+ vddpx_3:
+ vddpx_7:
+ vio_in:
+ pp1800_l10a: ldo10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdda_apc1_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_bb_clk:
+ pp1800_l11a: ldo11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ mcp_vccq:
+ pp1800_l12a_r: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /*
+ * On trogdor this needs to match l10a since we use it to
+ * give power to things like SPI flash which communicate back
+ * on lines powered by l10a. Thus we force to 1.8V.
+ */
+ pp1800_l13a: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_prox:
+ pp1800_l14a: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_alc5682:
+ pp1800_l15a: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vdd_pdphy:
+ pp3100_l17a: ldo17 {
+ regulator-min-microvolt = <2920000>;
+ regulator-max-microvolt = <3232000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_pen:
+ pp1800_l18a: ldo18 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ mcp_vcc:
+ pp2850_l19a: ldo19 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pm6150l-rpmh-regulators {
+ compatible = "qcom,pm6150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ pp1300_s8c: smps8 {
+ regulator-min-microvolt = <1120000>;
+ regulator-max-microvolt = <1408000>;
+ };
+
+ pp1800_l1c: ldo1 {
+ regulator-min-microvolt = <1616000>;
+ regulator-max-microvolt = <1984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_adc_dac:
+ pp1300_l2c: ldo2 {
+ regulator-min-microvolt = <1168000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1200_brij:
+ vdd_ufs1_1p2:
+ vdda_csi0_1p25:
+ vdda_csi1_1p25:
+ vdda_csi2_1p25:
+ vdda_csi3_1p25:
+ vdda_hv_ebi0:
+ vdda_mipi_dsi0_1p2:
+ vdda_usb_ss_dp_1p2:
+ vddpx_10:
+ pp1200_l3c: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ ppvar_l6c: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_l7c: ldo7 {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_brij_vccio:
+ pp1800_edp_vpll:
+ pp1800_l8c: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp2950_l9c: ldo9 {
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <2952000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_l10c: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_l11c: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+ };
+};
+
+ap_ec_spi: &spi6 {
+ status = "okay";
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <94 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_ec_int_l>;
+ spi-max-frequency = <3000000>;
+
+ cros_ec_pwm: pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+ };
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ typec {
+ compatible = "google,cros-ec-typec";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_c0: connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ label = "left";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+
+ usb_c1: connector@1 {
+ compatible = "usb-c-connector";
+ reg = <1>;
+ label = "right";
+ power-role = "dual";
+ data-role = "host";
+ try-power-role = "source";
+ };
+ };
+ };
+};
+
+ap_h1_spi: &spi0 {
+ status = "okay";
+ cr50: tpm@0 {
+ compatible = "google,cr50";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&h1_ap_int_odl>;
+ spi-max-frequency = <800000>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <42 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&camcc {
+ status = "disabled";
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+};
+
+&dsi0_out {
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+ap_sar_sensor_i2c: &i2c5 {
+ clock-frequency = <400000>;
+
+ ap_sar_sensor: proximity@28 {
+ compatible = "semtech,sx9310";
+ reg = <0x28>;
+ #io-channel-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&p_sensor_int_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+ vdd-supply = <&pp3300_a>;
+ svdd-supply = <&pp1800_prox>;
+
+ label = "proximity-wifi";
+ };
+};
+
+ap_tp_i2c: &i2c7 {
+ clock-frequency = <400000>;
+
+ trackpad: trackpad@15 {
+ compatible = "elan,ekth3000";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&pp3300_fp_tp>;
+
+ wakeup-source;
+ };
+};
+
+hp_i2c: &i2c9 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ alc5682: codec@1a {
+ compatible = "realtek,rt5682i";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_irq>;
+
+ #sound-dai-cells = <1>;
+
+ interrupt-parent = <&tlmm>;
+ /*
+ * This will get ignored because the interrupt type
+ * is set in rt5682.c.
+ */
+ interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
+
+ AVDD-supply = <&pp1800_alc5682>;
+ MICVDD-supply = <&pp3300_codec>;
+ VBAT-supply = <&pp3300_audio>;
+
+ realtek,dmic1-data-pin = <1>;
+ realtek,dmic1-clk-pin = <1>;
+ realtek,jd-src = <1>;
+ };
+};
+
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sec_mi2s_active>, <&pri_mi2s_active>, <&pri_mi2s_mclk_active>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mi2s@0 {
+ reg = <MI2S_PRIMARY>;
+ qcom,playback-sd-lines = <1>;
+ qcom,capture-sd-lines = <0>;
+ };
+
+ secondary_mi2s: mi2s@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ hdmi@5 {
+ reg = <LPASS_DP_RX>;
+ };
+};
+
+&mdp {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hot_plug_det>;
+ data-lanes = <0 1>;
+};
+
+&pm6150_adc {
+ charger-thermistor@4f {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ charger-thermistor@0 {
+ reg = <0>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pm6150_pon {
+ status = "disabled";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ compatible = "qcom,sc7180-mss-pil";
+ iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
+ memory-region = <&mba_mem &mpss_mem>;
+
+ /* This gets overridden for SKUs with LTE support. */
+ firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn",
+ "qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn";
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc1_on>;
+ pinctrl-1 = <&sdc1_off>;
+ vmmc-supply = <&mcp_vcc>;
+ vqmmc-supply = <&mcp_vccq>;
+};
+
+&sdhc_2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_on>;
+ pinctrl-1 = <&sdc2_off>;
+ vmmc-supply = <&pp2950_l9c>;
+ vqmmc-supply = <&ppvar_l6c>;
+
+ cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+ pinctrl-0 = <&qup_spi0_cs_gpio_init_high>, <&qup_spi0_cs_gpio>;
+ cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+};
+
+&spi6 {
+ pinctrl-0 = <&qup_spi6_cs_gpio_init_high>, <&qup_spi6_cs_gpio>;
+ cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+};
+
+ap_spi_fp: &spi10 {
+ pinctrl-0 = <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
+ cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
+
+ cros_ec_fp: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fp_to_ap_irq_l>;
+ spi-max-frequency = <3000000>;
+ };
+};
+
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart3 {
+ status = "okay";
+
+ /delete-property/interrupts;
+ interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
+ <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-1 = <&qup_uart3_sleep>;
+
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn3991-bt";
+ vddio-supply = <&pp1800_l10a>;
+ vddxo-supply = <&pp1800_l1c>;
+ vddrf-supply = <&pp1300_l2c>;
+ vddch0-supply = <&pp3300_l10c>;
+ max-speed = <3200000>;
+ };
+};
+
+&uart8 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.x hub on port 1 */
+ usb_hub_2_x: hub@1 {
+ compatible = "usbbda,5411";
+ reg = <1>;
+ vdd-supply = <&pp3300_hub>;
+ peer-hub = <&usb_hub_3_x>;
+ };
+
+ /* 3.x hub on port 2 */
+ usb_hub_3_x: hub@2 {
+ compatible = "usbbda,411";
+ reg = <2>;
+ vdd-supply = <&pp3300_hub>;
+ peer-hub = <&usb_hub_2_x>;
+ };
+};
+
+&usb_1_hsphy {
+ status = "okay";
+ vdd-supply = <&vdd_qusb_hs0_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+ qcom,imp-res-offset-value = <8>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+ qcom,bias-ctrl-value = <0x22>;
+ qcom,charge-ctrl-value = <3>;
+ qcom,hsdisc-trim-value = <0>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
+ vdda-pll-supply = <&vdda_usb_ss_dp_core>;
+};
+
+&venus {
+ video-firmware {
+ iommus = <&apps_smmu 0x0c42 0x0>;
+ };
+};
+
+&wifi {
+ status = "okay";
+ vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>;
+ vdd-1.8-xo-supply = <&pp1800_l1c>;
+ vdd-1.3-rfa-supply = <&pp1300_l2c>;
+ vdd-3.3-ch0-supply = <&pp3300_l10c>;
+ vdd-3.3-ch1-supply = <&pp3300_l11c>;
+
+ wifi-firmware {
+ iommus = <&apps_smmu 0xc2 0x1>;
+ };
+};
+
+/* PINCTRL - additions to nodes defined in sc7180.dtsi */
+
+&dp_hot_plug_det {
+ pinconf {
+ pins = "gpio117";
+ bias-disable;
+ };
+};
+
+&pri_mi2s_active {
+ pinconf {
+ pins = "gpio53", "gpio54", "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&pri_mi2s_mclk_active {
+ pinconf {
+ pins = "gpio57";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+&qspi_cs0 {
+ pinconf {
+ pins = "gpio68";
+ bias-disable;
+ };
+};
+
+&qspi_clk {
+ pinconf {
+ pins = "gpio63";
+ drive-strength = <8>;
+ bias-disable;
+ };
+};
+
+&qspi_data01 {
+ pinconf {
+ pins = "gpio64", "gpio65";
+
+ /* High-Z when no transfers; nice to park the lines */
+ bias-pull-up;
+ };
+};
+
+&qup_i2c2_default {
+ pinconf {
+ pins = "gpio15", "gpio16";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c4_default {
+ pinconf {
+ pins = "gpio115", "gpio116";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c5_default {
+ pinconf {
+ pins = "gpio25", "gpio26";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c7_default {
+ pinconf {
+ pins = "gpio6", "gpio7";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c9_default {
+ pinconf {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_spi0_cs_gpio {
+ pinconf {
+ pins = "gpio34", "gpio35", "gpio36", "gpio37";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi6_cs_gpio {
+ pinconf {
+ pins = "gpio59", "gpio60", "gpio61", "gpio62";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi10_cs_gpio {
+ pinconf {
+ pins = "gpio86", "gpio87", "gpio88", "gpio89";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_uart3_default {
+ pinconf-cts {
+ /*
+ * Configure a pull-down on CTS to match the pull of
+ * the Bluetooth module.
+ */
+ pins = "gpio38";
+ bias-pull-down;
+ };
+
+ pinconf-rts-tx {
+ /* We'll drive RTS and TX, so no pull */
+ pins = "gpio39", "gpio40";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module is
+ * in tri-state (module powered off or not driving the
+ * signal yet).
+ */
+ pins = "gpio41";
+ bias-pull-up;
+ };
+};
+
+&qup_uart8_default {
+ pinconf-tx {
+ pins = "gpio44";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio45";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&sec_mi2s_active {
+ pinconf {
+ pins = "gpio49", "gpio50", "gpio51";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm6150_gpio {
+ status = "disabled"; /* No GPIOs are connected */
+};
+
+&pm6150l_gpio {
+ gpio-line-names = "AP_SUSPEND",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&tlmm {
+ /*
+ * pinctrl settings for pins that have no real owners.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>;
+
+ amp_en: amp-en {
+ pinmux {
+ pins = "gpio23";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio23";
+ bias-pull-down;
+ };
+ };
+
+ ap_ec_int_l: ap-ec-int-l {
+ pinmux {
+ pins = "gpio94";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio94";
+ bias-pull-up;
+ };
+ };
+
+ ap_edp_bklten: ap-edp-bklten {
+ pinmux {
+ pins = "gpio12";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+
+ /* Force backlight to be disabled to match state at boot. */
+ output-low;
+ };
+ };
+
+ ap_suspend_l_neuter: ap-suspend-l-neuter {
+ pinmux {
+ pins = "gpio27";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio27";
+ bias-disable;
+ };
+ };
+
+ bios_flash_wp_l: bios-flash-wp-l {
+ pinmux {
+ pins = "gpio66";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio66";
+ bias-disable;
+ };
+ };
+
+ edp_brij_en: edp-brij-en {
+ pinmux {
+ pins = "gpio104";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio104";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ en_pp3300_codec: en-pp3300-codec {
+ pinmux {
+ pins = "gpio83";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio83";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ en_pp3300_dx_edp: en-pp3300-dx-edp {
+ pinmux {
+ pins = "gpio30";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio30";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ en_pp3300_hub: en-pp3300-hub {
+ pinmux {
+ pins = "gpio84";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio84";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ fp_to_ap_irq_l: fp-to-ap-irq-l {
+ pinmux {
+ pins = "gpio4";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio4";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ h1_ap_int_odl: h1-ap-int-odl {
+ pinmux {
+ pins = "gpio42";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio42";
+ bias-pull-up;
+ };
+ };
+
+ hp_irq: hp-irq {
+ pinmux {
+ pins = "gpio28";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio28";
+ bias-pull-up;
+ };
+ };
+
+ pen_irq_l: pen-irq-l {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ pen_pdct_l: pen-pdct-l {
+ pinmux {
+ pins = "gpio52";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio52";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ pen_rst_odl: pen-rst-odl {
+ pinmux {
+ pins = "gpio18";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio18";
+ bias-disable;
+ drive-strength = <2>;
+
+ /*
+ * The pen driver doesn't currently support
+ * driving this reset line. By specifying
+ * output-high here we're relying on the fact
+ * that this pin has a default pulldown at boot
+ * (which makes sure the pen was in reset if it
+ * was powered) and then we set it high here to
+ * take it out of reset. Better would be if the
+ * pen driver could control this and we could
+ * remove "output-high" here.
+ */
+ output-high; /* TODO: Remove this? */
+ };
+ };
+
+ p_sensor_int_l: p-sensor-int-l {
+ pinmux {
+ pins = "gpio24";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio24";
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ qup_spi0_cs_gpio_init_high: qup-spi0-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio37";
+ output-high;
+ };
+ };
+
+ qup_spi6_cs_gpio_init_high: qup-spi6-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio62";
+ output-high;
+ };
+ };
+
+ qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+ pinconf {
+ pins = "gpio89";
+ output-high;
+ };
+ };
+
+ qup_uart3_sleep: qup-uart3-sleep {
+ pinmux {
+ pins = "gpio38", "gpio39",
+ "gpio40", "gpio41";
+ function = "gpio";
+ };
+
+ pinconf-cts {
+ /*
+ * Configure a pull-down on CTS to match the pull of
+ * the Bluetooth module.
+ */
+ pins = "gpio38";
+ bias-pull-down;
+ };
+
+ pinconf-rts {
+ /*
+ * Configure pull-down on RTS. As RTS is active low
+ * signal, pull it low to indicate the BT SoC that it
+ * can wakeup the system anytime from suspend state by
+ * pulling RX low (by sending wakeup bytes).
+ */
+ pins = "gpio39";
+ bias-pull-down;
+ };
+
+ pinconf-tx {
+ /*
+ * Configure pull-up on TX when it isn't actively driven
+ * to prevent BT SoC from receiving garbage during sleep.
+ */
+ pins = "gpio40";
+ bias-pull-up;
+ };
+
+ pinconf-rx {
+ /*
+ * Configure a pull-up on RX. This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module
+ * is floating which may cause spurious wakeups.
+ */
+ pins = "gpio41";
+ bias-pull-up;
+ };
+ };
+
+ /* Named trackpad_int_1v8_odl on earlier revision schematics */
+ trackpad_int_1v8_odl:
+ tp_int_odl: tp-int-odl {
+ pinmux {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio0";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ ts_int_l: ts-int-l {
+ pinmux {
+ pins = "gpio9";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio9";
+ bias-pull-up;
+ };
+ };
+
+ ts_reset_l: ts-reset-l {
+ pinmux {
+ pins = "gpio8";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio8";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc1_on: sdc1-on {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc1_off: sdc1-off {
+ pinconf-clk {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-rclk {
+ pins = "sdc1_rclk";
+ bias-pull-down;
+ };
+ };
+
+ sdc2_on: sdc2-on {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_off: sdc2-off {
+ pinconf-clk {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pinconf-cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf-sd-cd {
+ pins = "gpio69";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ uf_cam_en: uf-cam-en {
+ pinmux {
+ pins = "gpio6";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio6";
+ drive-strength = <2>;
+ /* External pull down */
+ bias-disable;
+ };
+ };
+
+ wf_cam_en: wf-cam-en {
+ pinmux {
+ pins = "gpio7";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio7";
+ drive-strength = <2>;
+ /* External pull down */
+ bias-disable;
+ };
+ };
+};