Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 197 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
new file mode 100644
index 000000000..5836e4ecb
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2009 Extreme Engineering Solutions, Inc.
+ *
+ * X-ES board-specific functionality
+ *
+ * Based on mpc85xx_ds code from Freescale Semiconductor, Inc.
+ *
+ * Author: Nate Case <ncase@xes-inc.com>
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+/* A few bit definitions needed for fixups on some boards */
+#define MPC85xx_L2CTL_L2E		0x80000000 /* L2 enable */
+#define MPC85xx_L2CTL_L2I		0x40000000 /* L2 flash invalidate */
+#define MPC85xx_L2CTL_L2SIZ_MASK	0x30000000 /* L2 SRAM size (R/O) */
+
+void __init xes_mpc85xx_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+}
+
+static void __init xes_mpc85xx_configure_l2(void __iomem *l2_base)
+{
+	volatile uint32_t ctl, tmp;
+
+	asm volatile("msync; isync");
+	tmp = in_be32(l2_base);
+
+	/*
+	 * xMon may have enabled part of L2 as SRAM, so we need to set it
+	 * up for all cache mode just to be safe.
+	 */
+	printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
+
+	ctl = MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2I;
+	if (of_machine_is_compatible("MPC8540") ||
+	    of_machine_is_compatible("MPC8560"))
+		/*
+		 * Assume L2 SRAM is used fully for cache, so set
+		 * L2BLKSZ (bits 4:5) to match L2SIZ (bits 2:3).
+		 */
+		ctl |= (tmp & MPC85xx_L2CTL_L2SIZ_MASK) >> 2;
+
+	asm volatile("msync; isync");
+	out_be32(l2_base, ctl);
+	asm volatile("msync; isync");
+}
+
+static void __init xes_mpc85xx_fixups(void)
+{
+	struct device_node *np;
+	int err;
+
+	/*
+	 * Legacy xMon firmware on some X-ES boards does not enable L2
+	 * as cache.  We must ensure that they get enabled here.
+	 */
+	for_each_node_by_name(np, "l2-cache-controller") {
+		struct resource r[2];
+		void __iomem *l2_base;
+
+		/* Only MPC8548, MPC8540, and MPC8560 boards are affected */
+		if (!of_device_is_compatible(np,
+				    "fsl,mpc8548-l2-cache-controller") &&
+		    !of_device_is_compatible(np,
+				    "fsl,mpc8540-l2-cache-controller") &&
+		    !of_device_is_compatible(np,
+				    "fsl,mpc8560-l2-cache-controller"))
+			continue;
+
+		err = of_address_to_resource(np, 0, &r[0]);
+		if (err) {
+			printk(KERN_WARNING "xes_mpc85xx: Could not get "
+			       "resource for device tree node '%pOF'",
+			       np);
+			continue;
+		}
+
+		l2_base = ioremap(r[0].start, resource_size(&r[0]));
+
+		xes_mpc85xx_configure_l2(l2_base);
+	}
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init xes_mpc85xx_setup_arch(void)
+{
+	struct device_node *root;
+	const char *model = "Unknown";
+
+	root = of_find_node_by_path("/");
+	if (root == NULL)
+		return;
+
+	model = of_get_property(root, "model", NULL);
+
+	printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n",
+	       model + strlen("xes,"));
+
+	xes_mpc85xx_fixups();
+
+	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
+}
+
+machine_arch_initcall(xes_mpc8572, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8548, mpc85xx_common_publish_devices);
+machine_arch_initcall(xes_mpc8540, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init xes_mpc8572_probe(void)
+{
+	return of_machine_is_compatible("xes,MPC8572");
+}
+
+static int __init xes_mpc8548_probe(void)
+{
+	return of_machine_is_compatible("xes,MPC8548");
+}
+
+static int __init xes_mpc8540_probe(void)
+{
+	return of_machine_is_compatible("xes,MPC8540");
+}
+
+define_machine(xes_mpc8572) {
+	.name			= "X-ES MPC8572",
+	.probe			= xes_mpc8572_probe,
+	.setup_arch		= xes_mpc85xx_setup_arch,
+	.init_IRQ		= xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.get_irq		= mpic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(xes_mpc8548) {
+	.name			= "X-ES MPC8548",
+	.probe			= xes_mpc8548_probe,
+	.setup_arch		= xes_mpc85xx_setup_arch,
+	.init_IRQ		= xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.get_irq		= mpic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
+define_machine(xes_mpc8540) {
+	.name			= "X-ES MPC8540",
+	.probe			= xes_mpc8540_probe,
+	.setup_arch		= xes_mpc85xx_setup_arch,
+	.init_IRQ		= xes_mpc85xx_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
+#endif
+	.get_irq		= mpic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};