summaryrefslogtreecommitdiffstats
path: root/drivers/clk/sifive
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/clk/sifive
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/clk/sifive')
-rw-r--r--drivers/clk/sifive/Kconfig23
-rw-r--r--drivers/clk/sifive/Makefile2
-rw-r--r--drivers/clk/sifive/fu540-prci.h99
-rw-r--r--drivers/clk/sifive/fu740-prci.h143
-rw-r--r--drivers/clk/sifive/sifive-prci.c628
-rw-r--r--drivers/clk/sifive/sifive-prci.h312
6 files changed, 1207 insertions, 0 deletions
diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
new file mode 100644
index 000000000..b7fde0aad
--- /dev/null
+++ b/drivers/clk/sifive/Kconfig
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig CLK_SIFIVE
+ bool "SiFive SoC driver support"
+ depends on SOC_SIFIVE || COMPILE_TEST
+ default SOC_SIFIVE
+ help
+ SoC drivers for SiFive Linux-capable SoCs.
+
+if CLK_SIFIVE
+
+config CLK_SIFIVE_PRCI
+ bool "PRCI driver for SiFive SoCs"
+ default SOC_SIFIVE
+ select RESET_CONTROLLER
+ select RESET_SIMPLE
+ select CLK_ANALOGBITS_WRPLL_CLN28HPC
+ help
+ Supports the Power Reset Clock interface (PRCI) IP block found in
+ FU540/FU740 SoCs. If this kernel is meant to run on a SiFive FU540/
+ FU740 SoCs, enable this driver.
+
+endif
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
new file mode 100644
index 000000000..efdf01f1c
--- /dev/null
+++ b/drivers/clk/sifive/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CLK_SIFIVE_PRCI) += sifive-prci.o
diff --git a/drivers/clk/sifive/fu540-prci.h b/drivers/clk/sifive/fu540-prci.h
new file mode 100644
index 000000000..e0173324f
--- /dev/null
+++ b/drivers/clk/sifive/fu540-prci.h
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2021 SiFive, Inc.
+ * Copyright (C) 2018-2019 Wesley Terpstra
+ * Copyright (C) 2018-2019 Paul Walmsley
+ * Copyright (C) 2020-2021 Zong Li
+ *
+ * The FU540 PRCI implements clock and reset control for the SiFive
+ * FU540-C000 chip. This driver assumes that it has sole control
+ * over all PRCI resources.
+ *
+ * This driver is based on the PRCI driver written by Wesley Terpstra:
+ * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
+ *
+ * References:
+ * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
+ */
+
+#ifndef __SIFIVE_CLK_FU540_PRCI_H
+#define __SIFIVE_CLK_FU540_PRCI_H
+
+
+#include <linux/module.h>
+
+#include <dt-bindings/clock/sifive-fu540-prci.h>
+
+#include "sifive-prci.h"
+
+/* PRCI integration data for each WRPLL instance */
+
+static struct __prci_wrpll_data sifive_fu540_prci_corepll_data = {
+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
+ .disable_bypass = sifive_prci_coreclksel_use_corepll,
+};
+
+static struct __prci_wrpll_data sifive_fu540_prci_ddrpll_data = {
+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
+};
+
+static struct __prci_wrpll_data sifive_fu540_prci_gemgxlpll_data = {
+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
+};
+
+/* Linux clock framework integration */
+
+static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
+ .set_rate = sifive_prci_wrpll_set_rate,
+ .round_rate = sifive_prci_wrpll_round_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+ .enable = sifive_prci_clock_enable,
+ .disable = sifive_prci_clock_disable,
+ .is_enabled = sifive_clk_is_enabled,
+};
+
+static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
+ .recalc_rate = sifive_prci_tlclksel_recalc_rate,
+};
+
+/* List of clock controls provided by the PRCI */
+static struct __prci_clock __prci_init_clocks_fu540[] = {
+ [FU540_PRCI_CLK_COREPLL] = {
+ .name = "corepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu540_prci_wrpll_clk_ops,
+ .pwd = &sifive_fu540_prci_corepll_data,
+ },
+ [FU540_PRCI_CLK_DDRPLL] = {
+ .name = "ddrpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
+ .pwd = &sifive_fu540_prci_ddrpll_data,
+ },
+ [FU540_PRCI_CLK_GEMGXLPLL] = {
+ .name = "gemgxlpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu540_prci_wrpll_clk_ops,
+ .pwd = &sifive_fu540_prci_gemgxlpll_data,
+ },
+ [FU540_PRCI_CLK_TLCLK] = {
+ .name = "tlclk",
+ .parent_name = "corepll",
+ .ops = &sifive_fu540_prci_tlclksel_clk_ops,
+ },
+};
+
+static const struct prci_clk_desc prci_clk_fu540 = {
+ .clks = __prci_init_clocks_fu540,
+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
+};
+
+#endif /* __SIFIVE_CLK_FU540_PRCI_H */
diff --git a/drivers/clk/sifive/fu740-prci.h b/drivers/clk/sifive/fu740-prci.h
new file mode 100644
index 000000000..f31cd30fc
--- /dev/null
+++ b/drivers/clk/sifive/fu740-prci.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2021 SiFive, Inc.
+ * Copyright (C) 2020-2021 Zong Li
+ */
+
+#ifndef __SIFIVE_CLK_FU740_PRCI_H
+#define __SIFIVE_CLK_FU740_PRCI_H
+
+#include <linux/module.h>
+
+#include <dt-bindings/clock/sifive-fu740-prci.h>
+
+#include "sifive-prci.h"
+
+/* PRCI integration data for each WRPLL instance */
+
+static struct __prci_wrpll_data sifive_fu740_prci_corepll_data = {
+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_COREPLLCFG1_OFFSET,
+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
+ .disable_bypass = sifive_prci_coreclksel_use_final_corepll,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_ddrpll_data = {
+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_DDRPLLCFG1_OFFSET,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_gemgxlpll_data = {
+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_GEMGXLPLLCFG1_OFFSET,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_dvfscorepll_data = {
+ .cfg0_offs = PRCI_DVFSCOREPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_DVFSCOREPLLCFG1_OFFSET,
+ .enable_bypass = sifive_prci_corepllsel_use_corepll,
+ .disable_bypass = sifive_prci_corepllsel_use_dvfscorepll,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_hfpclkpll_data = {
+ .cfg0_offs = PRCI_HFPCLKPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_HFPCLKPLLCFG1_OFFSET,
+ .enable_bypass = sifive_prci_hfpclkpllsel_use_hfclk,
+ .disable_bypass = sifive_prci_hfpclkpllsel_use_hfpclkpll,
+};
+
+static struct __prci_wrpll_data sifive_fu740_prci_cltxpll_data = {
+ .cfg0_offs = PRCI_CLTXPLLCFG0_OFFSET,
+ .cfg1_offs = PRCI_CLTXPLLCFG1_OFFSET,
+};
+
+/* Linux clock framework integration */
+
+static const struct clk_ops sifive_fu740_prci_wrpll_clk_ops = {
+ .set_rate = sifive_prci_wrpll_set_rate,
+ .round_rate = sifive_prci_wrpll_round_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+ .enable = sifive_prci_clock_enable,
+ .disable = sifive_prci_clock_disable,
+ .is_enabled = sifive_clk_is_enabled,
+};
+
+static const struct clk_ops sifive_fu740_prci_wrpll_ro_clk_ops = {
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_tlclksel_clk_ops = {
+ .recalc_rate = sifive_prci_tlclksel_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_hfpclkplldiv_clk_ops = {
+ .recalc_rate = sifive_prci_hfpclkplldiv_recalc_rate,
+};
+
+static const struct clk_ops sifive_fu740_prci_pcie_aux_clk_ops = {
+ .enable = sifive_prci_pcie_aux_clock_enable,
+ .disable = sifive_prci_pcie_aux_clock_disable,
+ .is_enabled = sifive_prci_pcie_aux_clock_is_enabled,
+};
+
+/* List of clock controls provided by the PRCI */
+static struct __prci_clock __prci_init_clocks_fu740[] = {
+ [FU740_PRCI_CLK_COREPLL] = {
+ .name = "corepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &sifive_fu740_prci_corepll_data,
+ },
+ [FU740_PRCI_CLK_DDRPLL] = {
+ .name = "ddrpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_ro_clk_ops,
+ .pwd = &sifive_fu740_prci_ddrpll_data,
+ },
+ [FU740_PRCI_CLK_GEMGXLPLL] = {
+ .name = "gemgxlpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &sifive_fu740_prci_gemgxlpll_data,
+ },
+ [FU740_PRCI_CLK_DVFSCOREPLL] = {
+ .name = "dvfscorepll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &sifive_fu740_prci_dvfscorepll_data,
+ },
+ [FU740_PRCI_CLK_HFPCLKPLL] = {
+ .name = "hfpclkpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &sifive_fu740_prci_hfpclkpll_data,
+ },
+ [FU740_PRCI_CLK_CLTXPLL] = {
+ .name = "cltxpll",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_wrpll_clk_ops,
+ .pwd = &sifive_fu740_prci_cltxpll_data,
+ },
+ [FU740_PRCI_CLK_TLCLK] = {
+ .name = "tlclk",
+ .parent_name = "corepll",
+ .ops = &sifive_fu740_prci_tlclksel_clk_ops,
+ },
+ [FU740_PRCI_CLK_PCLK] = {
+ .name = "pclk",
+ .parent_name = "hfpclkpll",
+ .ops = &sifive_fu740_prci_hfpclkplldiv_clk_ops,
+ },
+ [FU740_PRCI_CLK_PCIE_AUX] = {
+ .name = "pcie_aux",
+ .parent_name = "hfclk",
+ .ops = &sifive_fu740_prci_pcie_aux_clk_ops,
+ },
+};
+
+static const struct prci_clk_desc prci_clk_fu740 = {
+ .clks = __prci_init_clocks_fu740,
+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu740),
+};
+
+#endif /* __SIFIVE_CLK_FU740_PRCI_H */
diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
new file mode 100644
index 000000000..916d2fc28
--- /dev/null
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -0,0 +1,628 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 SiFive, Inc.
+ * Copyright (C) 2020 Zong Li
+ */
+
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include "sifive-prci.h"
+#include "fu540-prci.h"
+#include "fu740-prci.h"
+
+/*
+ * Private functions
+ */
+
+/**
+ * __prci_readl() - read from a PRCI register
+ * @pd: PRCI context
+ * @offs: register offset to read from (in bytes, from PRCI base address)
+ *
+ * Read the register located at offset @offs from the base virtual
+ * address of the PRCI register target described by @pd, and return
+ * the value to the caller.
+ *
+ * Context: Any context.
+ *
+ * Return: the contents of the register described by @pd and @offs.
+ */
+static u32 __prci_readl(struct __prci_data *pd, u32 offs)
+{
+ return readl_relaxed(pd->va + offs);
+}
+
+static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
+{
+ writel_relaxed(v, pd->va + offs);
+}
+
+/* WRPLL-related private functions */
+
+/**
+ * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
+ * @c: ptr to a struct wrpll_cfg record to write config into
+ * @r: value read from the PRCI PLL configuration register
+ *
+ * Given a value @r read from an FU740 PRCI PLL configuration register,
+ * split it into fields and populate it into the WRPLL configuration record
+ * pointed to by @c.
+ *
+ * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
+ * have the same register layout.
+ *
+ * Context: Any context.
+ */
+static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
+{
+ u32 v;
+
+ v = r & PRCI_COREPLLCFG0_DIVR_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
+ c->divr = v;
+
+ v = r & PRCI_COREPLLCFG0_DIVF_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
+ c->divf = v;
+
+ v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
+ v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
+ c->divq = v;
+
+ v = r & PRCI_COREPLLCFG0_RANGE_MASK;
+ v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
+ c->range = v;
+
+ c->flags &=
+ (WRPLL_FLAGS_INT_FEEDBACK_MASK | WRPLL_FLAGS_EXT_FEEDBACK_MASK);
+
+ /* external feedback mode not supported */
+ c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
+}
+
+/**
+ * __prci_wrpll_pack() - pack PLL configuration parameters into a register value
+ * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg
+ *
+ * Using a set of WRPLL configuration values pointed to by @c,
+ * assemble a PRCI PLL configuration register value, and return it to
+ * the caller.
+ *
+ * Context: Any context. Caller must ensure that the contents of the
+ * record pointed to by @c do not change during the execution
+ * of this function.
+ *
+ * Returns: a value suitable for writing into a PRCI PLL configuration
+ * register
+ */
+static u32 __prci_wrpll_pack(const struct wrpll_cfg *c)
+{
+ u32 r = 0;
+
+ r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
+ r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
+ r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
+ r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
+
+ /* external feedback mode not supported */
+ r |= PRCI_COREPLLCFG0_FSE_MASK;
+
+ return r;
+}
+
+/**
+ * __prci_wrpll_read_cfg0() - read the WRPLL configuration from the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ *
+ * Read the current configuration of the PLL identified by @pwd from
+ * the PRCI identified by @pd, and store it into the local configuration
+ * cache in @pwd.
+ *
+ * Context: Any context. Caller must prevent the records pointed to by
+ * @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_read_cfg0(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd)
+{
+ __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
+}
+
+/**
+ * __prci_wrpll_write_cfg0() - write WRPLL configuration into the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ * @c: WRPLL configuration record to write
+ *
+ * Write the WRPLL configuration described by @c into the WRPLL
+ * configuration register identified by @pwd in the PRCI instance
+ * described by @c. Make a cached copy of the WRPLL's current
+ * configuration so it can be used by other code.
+ *
+ * Context: Any context. Caller must prevent the records pointed to by
+ * @pd and @pwd from changing during execution.
+ */
+static void __prci_wrpll_write_cfg0(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd,
+ struct wrpll_cfg *c)
+{
+ __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
+
+ memcpy(&pwd->c, c, sizeof(*c));
+}
+
+/**
+ * __prci_wrpll_write_cfg1() - write Clock enable/disable configuration
+ * into the PRCI
+ * @pd: PRCI context
+ * @pwd: PRCI WRPLL metadata
+ * @enable: Clock enable or disable value
+ */
+static void __prci_wrpll_write_cfg1(struct __prci_data *pd,
+ struct __prci_wrpll_data *pwd,
+ u32 enable)
+{
+ __prci_writel(enable, pwd->cfg1_offs, pd);
+}
+
+/*
+ * Linux clock framework integration
+ *
+ * See the Linux clock framework documentation for more information on
+ * these functions.
+ */
+
+unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+
+ return wrpll_calc_output_rate(&pwd->c, parent_rate);
+}
+
+long sifive_prci_wrpll_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct wrpll_cfg c;
+
+ memcpy(&c, &pwd->c, sizeof(c));
+
+ wrpll_configure_for_rate(&c, rate, *parent_rate);
+
+ return wrpll_calc_output_rate(&c, *parent_rate);
+}
+
+int sifive_prci_wrpll_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+ int r;
+
+ r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
+ if (r)
+ return r;
+
+ if (pwd->enable_bypass)
+ pwd->enable_bypass(pd);
+
+ __prci_wrpll_write_cfg0(pd, pwd, &pwd->c);
+
+ udelay(wrpll_calc_max_lock_us(&pwd->c));
+
+ return 0;
+}
+
+int sifive_clk_is_enabled(struct clk_hw *hw)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+ u32 r;
+
+ r = __prci_readl(pd, pwd->cfg1_offs);
+
+ if (r & PRCI_COREPLLCFG1_CKE_MASK)
+ return 1;
+ else
+ return 0;
+}
+
+int sifive_prci_clock_enable(struct clk_hw *hw)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+
+ if (sifive_clk_is_enabled(hw))
+ return 0;
+
+ __prci_wrpll_write_cfg1(pd, pwd, PRCI_COREPLLCFG1_CKE_MASK);
+
+ if (pwd->disable_bypass)
+ pwd->disable_bypass(pd);
+
+ return 0;
+}
+
+void sifive_prci_clock_disable(struct clk_hw *hw)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_wrpll_data *pwd = pc->pwd;
+ struct __prci_data *pd = pc->pd;
+ u32 r;
+
+ if (pwd->enable_bypass)
+ pwd->enable_bypass(pd);
+
+ r = __prci_readl(pd, pwd->cfg1_offs);
+ r &= ~PRCI_COREPLLCFG1_CKE_MASK;
+
+ __prci_wrpll_write_cfg1(pd, pwd, r);
+}
+
+/* TLCLKSEL clock integration */
+
+unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_data *pd = pc->pd;
+ u32 v;
+ u8 div;
+
+ v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
+ v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
+ div = v ? 1 : 2;
+
+ return div_u64(parent_rate, div);
+}
+
+/* HFPCLK clock integration */
+
+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_data *pd = pc->pd;
+ u32 div = __prci_readl(pd, PRCI_HFPCLKPLLDIV_OFFSET);
+
+ return div_u64(parent_rate, div + 2);
+}
+
+/*
+ * Core clock mux control
+ */
+
+/**
+ * sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output
+ * COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the COREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_coreclksel_use_final_corepll() - switch the CORECLK mux to output
+ * FINAL_COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the final COREPLL output clock; return once
+ * complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_corepllsel_use_dvfscorepll() - switch the COREPLL mux to
+ * output DVFS_COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
+ *
+ * Switch the COREPLL mux to the DVFSCOREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_COREPLLSEL_OFFSET register.
+ */
+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
+ r |= PRCI_COREPLLSEL_COREPLLSEL_MASK;
+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_corepllsel_use_corepll() - switch the COREPLL mux to
+ * output COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the COREPLL mux reg
+ *
+ * Switch the COREPLL mux to the COREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_COREPLLSEL_OFFSET register.
+ */
+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET);
+ r &= ~PRCI_COREPLLSEL_COREPLLSEL_MASK;
+ __prci_writel(r, PRCI_COREPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_COREPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_hfpclkpllsel_use_hfclk() - switch the HFPCLKPLL mux to
+ * output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
+ *
+ * Switch the HFPCLKPLL mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_HFPCLKPLLSEL_OFFSET register.
+ */
+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
+ r |= PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
+}
+
+/**
+ * sifive_prci_hfpclkpllsel_use_hfpclkpll() - switch the HFPCLKPLL mux to
+ * output HFPCLKPLL
+ * @pd: struct __prci_data * for the PRCI containing the HFPCLKPLL mux reg
+ *
+ * Switch the HFPCLKPLL mux to the HFPCLKPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_HFPCLKPLLSEL_OFFSET register.
+ */
+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd)
+{
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET);
+ r &= ~PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK;
+ __prci_writel(r, PRCI_HFPCLKPLLSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_HFPCLKPLLSEL_OFFSET); /* barrier */
+}
+
+/* PCIE AUX clock APIs for enable, disable. */
+int sifive_prci_pcie_aux_clock_is_enabled(struct clk_hw *hw)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_data *pd = pc->pd;
+ u32 r;
+
+ r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET);
+
+ if (r & PRCI_PCIE_AUX_EN_MASK)
+ return 1;
+ else
+ return 0;
+}
+
+int sifive_prci_pcie_aux_clock_enable(struct clk_hw *hw)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_data *pd = pc->pd;
+ u32 r __maybe_unused;
+
+ if (sifive_prci_pcie_aux_clock_is_enabled(hw))
+ return 0;
+
+ __prci_writel(1, PRCI_PCIE_AUX_OFFSET, pd);
+ r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */
+
+ return 0;
+}
+
+void sifive_prci_pcie_aux_clock_disable(struct clk_hw *hw)
+{
+ struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
+ struct __prci_data *pd = pc->pd;
+ u32 r __maybe_unused;
+
+ __prci_writel(0, PRCI_PCIE_AUX_OFFSET, pd);
+ r = __prci_readl(pd, PRCI_PCIE_AUX_OFFSET); /* barrier */
+
+}
+
+/**
+ * __prci_register_clocks() - register clock controls in the PRCI
+ * @dev: Linux struct device
+ * @pd: The pointer for PRCI per-device instance data
+ * @desc: The pointer for the information of clocks of each SoCs
+ *
+ * Register the list of clock controls described in __prci_init_clocks[] with
+ * the Linux clock framework.
+ *
+ * Return: 0 upon success or a negative error code upon failure.
+ */
+static int __prci_register_clocks(struct device *dev, struct __prci_data *pd,
+ const struct prci_clk_desc *desc)
+{
+ struct clk_init_data init = { };
+ struct __prci_clock *pic;
+ int parent_count, i, r;
+
+ parent_count = of_clk_get_parent_count(dev->of_node);
+ if (parent_count != EXPECTED_CLK_PARENT_COUNT) {
+ dev_err(dev, "expected only two parent clocks, found %d\n",
+ parent_count);
+ return -EINVAL;
+ }
+
+ /* Register PLLs */
+ for (i = 0; i < desc->num_clks; ++i) {
+ pic = &(desc->clks[i]);
+
+ init.name = pic->name;
+ init.parent_names = &pic->parent_name;
+ init.num_parents = 1;
+ init.ops = pic->ops;
+ pic->hw.init = &init;
+
+ pic->pd = pd;
+
+ if (pic->pwd)
+ __prci_wrpll_read_cfg0(pd, pic->pwd);
+
+ r = devm_clk_hw_register(dev, &pic->hw);
+ if (r) {
+ dev_warn(dev, "Failed to register clock %s: %d\n",
+ init.name, r);
+ return r;
+ }
+
+ r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev));
+ if (r) {
+ dev_warn(dev, "Failed to register clkdev for %s: %d\n",
+ init.name, r);
+ return r;
+ }
+
+ pd->hw_clks.hws[i] = &pic->hw;
+ }
+
+ pd->hw_clks.num = i;
+
+ r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+ &pd->hw_clks);
+ if (r) {
+ dev_err(dev, "could not add hw_provider: %d\n", r);
+ return r;
+ }
+
+ return 0;
+}
+
+/**
+ * sifive_prci_probe() - initialize prci data and check parent count
+ * @pdev: platform device pointer for the prci
+ *
+ * Return: 0 upon success or a negative error code upon failure.
+ */
+static int sifive_prci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct __prci_data *pd;
+ const struct prci_clk_desc *desc;
+ int r;
+
+ desc = of_device_get_match_data(&pdev->dev);
+
+ pd = devm_kzalloc(dev, struct_size(pd, hw_clks.hws, desc->num_clks), GFP_KERNEL);
+ if (!pd)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pd->va = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pd->va))
+ return PTR_ERR(pd->va);
+
+ pd->reset.rcdev.owner = THIS_MODULE;
+ pd->reset.rcdev.nr_resets = PRCI_RST_NR;
+ pd->reset.rcdev.ops = &reset_simple_ops;
+ pd->reset.rcdev.of_node = pdev->dev.of_node;
+ pd->reset.active_low = true;
+ pd->reset.membase = pd->va + PRCI_DEVICESRESETREG_OFFSET;
+ spin_lock_init(&pd->reset.lock);
+
+ r = devm_reset_controller_register(&pdev->dev, &pd->reset.rcdev);
+ if (r) {
+ dev_err(dev, "could not register reset controller: %d\n", r);
+ return r;
+ }
+ r = __prci_register_clocks(dev, pd, desc);
+ if (r) {
+ dev_err(dev, "could not register clocks: %d\n", r);
+ return r;
+ }
+
+ dev_dbg(dev, "SiFive PRCI probed\n");
+
+ return 0;
+}
+
+static const struct of_device_id sifive_prci_of_match[] = {
+ {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
+ {.compatible = "sifive,fu740-c000-prci", .data = &prci_clk_fu740},
+ {}
+};
+
+static struct platform_driver sifive_prci_driver = {
+ .driver = {
+ .name = "sifive-clk-prci",
+ .of_match_table = sifive_prci_of_match,
+ },
+ .probe = sifive_prci_probe,
+};
+
+static int __init sifive_prci_init(void)
+{
+ return platform_driver_register(&sifive_prci_driver);
+}
+core_initcall(sifive_prci_init);
diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
new file mode 100644
index 000000000..91658a88a
--- /dev/null
+++ b/drivers/clk/sifive/sifive-prci.h
@@ -0,0 +1,312 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ */
+
+#ifndef __SIFIVE_CLK_SIFIVE_PRCI_H
+#define __SIFIVE_CLK_SIFIVE_PRCI_H
+
+#include <linux/clk/analogbits-wrpll-cln28hpc.h>
+#include <linux/clk-provider.h>
+#include <linux/reset/reset-simple.h>
+#include <linux/platform_device.h>
+
+/*
+ * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
+ * hfclk and rtcclk
+ */
+#define EXPECTED_CLK_PARENT_COUNT 2
+
+/*
+ * Register offsets and bitmasks
+ */
+
+/* COREPLLCFG0 */
+#define PRCI_COREPLLCFG0_OFFSET 0x4
+#define PRCI_COREPLLCFG0_DIVR_SHIFT 0
+#define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
+#define PRCI_COREPLLCFG0_DIVF_SHIFT 6
+#define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
+#define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
+#define PRCI_COREPLLCFG0_RANGE_SHIFT 18
+#define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
+#define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
+#define PRCI_COREPLLCFG0_FSE_SHIFT 25
+#define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
+#define PRCI_COREPLLCFG0_LOCK_SHIFT 31
+#define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
+
+/* COREPLLCFG1 */
+#define PRCI_COREPLLCFG1_OFFSET 0x8
+#define PRCI_COREPLLCFG1_CKE_SHIFT 31
+#define PRCI_COREPLLCFG1_CKE_MASK (0x1 << PRCI_COREPLLCFG1_CKE_SHIFT)
+
+/* DDRPLLCFG0 */
+#define PRCI_DDRPLLCFG0_OFFSET 0xc
+#define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
+#define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
+#define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
+#define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
+#define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
+#define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
+#define PRCI_DDRPLLCFG0_FSE_SHIFT 25
+#define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
+#define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
+#define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG1 */
+#define PRCI_DDRPLLCFG1_OFFSET 0x10
+#define PRCI_DDRPLLCFG1_CKE_SHIFT 31
+#define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
+
+/* PCIEAUX */
+#define PRCI_PCIE_AUX_OFFSET 0x14
+#define PRCI_PCIE_AUX_EN_SHIFT 0
+#define PRCI_PCIE_AUX_EN_MASK (0x1 << PRCI_PCIE_AUX_EN_SHIFT)
+
+/* GEMGXLPLLCFG0 */
+#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
+#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
+#define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
+#define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
+#define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
+#define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
+#define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
+
+/* GEMGXLPLLCFG1 */
+#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
+#define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 31
+#define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
+
+/* CORECLKSEL */
+#define PRCI_CORECLKSEL_OFFSET 0x24
+#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
+#define PRCI_CORECLKSEL_CORECLKSEL_MASK \
+ (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
+
+/* DEVICESRESETREG */
+#define PRCI_DEVICESRESETREG_OFFSET 0x28
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_CHIPLINK_RST_N_SHIFT 6
+#define PRCI_DEVICESRESETREG_CHIPLINK_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_CHIPLINK_RST_N_SHIFT)
+
+#define PRCI_RST_NR 7
+
+/* CLKMUXSTATUSREG */
+#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
+ (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
+
+/* CLTXPLLCFG0 */
+#define PRCI_CLTXPLLCFG0_OFFSET 0x30
+#define PRCI_CLTXPLLCFG0_DIVR_SHIFT 0
+#define PRCI_CLTXPLLCFG0_DIVR_MASK (0x3f << PRCI_CLTXPLLCFG0_DIVR_SHIFT)
+#define PRCI_CLTXPLLCFG0_DIVF_SHIFT 6
+#define PRCI_CLTXPLLCFG0_DIVF_MASK (0x1ff << PRCI_CLTXPLLCFG0_DIVF_SHIFT)
+#define PRCI_CLTXPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_CLTXPLLCFG0_DIVQ_MASK (0x7 << PRCI_CLTXPLLCFG0_DIVQ_SHIFT)
+#define PRCI_CLTXPLLCFG0_RANGE_SHIFT 18
+#define PRCI_CLTXPLLCFG0_RANGE_MASK (0x7 << PRCI_CLTXPLLCFG0_RANGE_SHIFT)
+#define PRCI_CLTXPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_CLTXPLLCFG0_BYPASS_MASK (0x1 << PRCI_CLTXPLLCFG0_BYPASS_SHIFT)
+#define PRCI_CLTXPLLCFG0_FSE_SHIFT 25
+#define PRCI_CLTXPLLCFG0_FSE_MASK (0x1 << PRCI_CLTXPLLCFG0_FSE_SHIFT)
+#define PRCI_CLTXPLLCFG0_LOCK_SHIFT 31
+#define PRCI_CLTXPLLCFG0_LOCK_MASK (0x1 << PRCI_CLTXPLLCFG0_LOCK_SHIFT)
+
+/* CLTXPLLCFG1 */
+#define PRCI_CLTXPLLCFG1_OFFSET 0x34
+#define PRCI_CLTXPLLCFG1_CKE_SHIFT 31
+#define PRCI_CLTXPLLCFG1_CKE_MASK (0x1 << PRCI_CLTXPLLCFG1_CKE_SHIFT)
+
+/* DVFSCOREPLLCFG0 */
+#define PRCI_DVFSCOREPLLCFG0_OFFSET 0x38
+
+/* DVFSCOREPLLCFG1 */
+#define PRCI_DVFSCOREPLLCFG1_OFFSET 0x3c
+#define PRCI_DVFSCOREPLLCFG1_CKE_SHIFT 31
+#define PRCI_DVFSCOREPLLCFG1_CKE_MASK (0x1 << PRCI_DVFSCOREPLLCFG1_CKE_SHIFT)
+
+/* COREPLLSEL */
+#define PRCI_COREPLLSEL_OFFSET 0x40
+#define PRCI_COREPLLSEL_COREPLLSEL_SHIFT 0
+#define PRCI_COREPLLSEL_COREPLLSEL_MASK \
+ (0x1 << PRCI_COREPLLSEL_COREPLLSEL_SHIFT)
+
+/* HFPCLKPLLCFG0 */
+#define PRCI_HFPCLKPLLCFG0_OFFSET 0x50
+#define PRCI_HFPCLKPLL_CFG0_DIVR_SHIFT 0
+#define PRCI_HFPCLKPLL_CFG0_DIVR_MASK \
+ (0x3f << PRCI_HFPCLKPLLCFG0_DIVR_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_DIVF_SHIFT 6
+#define PRCI_HFPCLKPLL_CFG0_DIVF_MASK \
+ (0x1ff << PRCI_HFPCLKPLLCFG0_DIVF_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_DIVQ_SHIFT 15
+#define PRCI_HFPCLKPLL_CFG0_DIVQ_MASK \
+ (0x7 << PRCI_HFPCLKPLLCFG0_DIVQ_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_RANGE_SHIFT 18
+#define PRCI_HFPCLKPLL_CFG0_RANGE_MASK \
+ (0x7 << PRCI_HFPCLKPLLCFG0_RANGE_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_BYPASS_SHIFT 24
+#define PRCI_HFPCLKPLL_CFG0_BYPASS_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_BYPASS_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_FSE_SHIFT 25
+#define PRCI_HFPCLKPLL_CFG0_FSE_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_FSE_SHIFT)
+#define PRCI_HFPCLKPLL_CFG0_LOCK_SHIFT 31
+#define PRCI_HFPCLKPLL_CFG0_LOCK_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG0_LOCK_SHIFT)
+
+/* HFPCLKPLLCFG1 */
+#define PRCI_HFPCLKPLLCFG1_OFFSET 0x54
+#define PRCI_HFPCLKPLLCFG1_CKE_SHIFT 31
+#define PRCI_HFPCLKPLLCFG1_CKE_MASK \
+ (0x1 << PRCI_HFPCLKPLLCFG1_CKE_SHIFT)
+
+/* HFPCLKPLLSEL */
+#define PRCI_HFPCLKPLLSEL_OFFSET 0x58
+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT 0
+#define PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_MASK \
+ (0x1 << PRCI_HFPCLKPLLSEL_HFPCLKPLLSEL_SHIFT)
+
+/* HFPCLKPLLDIV */
+#define PRCI_HFPCLKPLLDIV_OFFSET 0x5c
+
+/* PRCIPLL */
+#define PRCI_PRCIPLL_OFFSET 0xe0
+
+/* PROCMONCFG */
+#define PRCI_PROCMONCFG_OFFSET 0xf0
+
+/*
+ * Private structures
+ */
+
+/**
+ * struct __prci_data - per-device-instance data
+ * @va: base virtual address of the PRCI IP block
+ * @hw_clks: encapsulates struct clk_hw records
+ *
+ * PRCI per-device instance data
+ */
+struct __prci_data {
+ void __iomem *va;
+ struct reset_simple_data reset;
+ struct clk_hw_onecell_data hw_clks;
+};
+
+/**
+ * struct __prci_wrpll_data - WRPLL configuration and integration data
+ * @c: WRPLL current configuration record
+ * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
+ * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
+ * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
+ * @cfg1_offs: WRPLL CFG1 register offset (in bytes) from the PRCI base address
+ *
+ * @enable_bypass and @disable_bypass are used for WRPLL instances
+ * that contain a separate external glitchless clock mux downstream
+ * from the PLL. The WRPLL internal bypass mux is not glitchless.
+ */
+struct __prci_wrpll_data {
+ struct wrpll_cfg c;
+ void (*enable_bypass)(struct __prci_data *pd);
+ void (*disable_bypass)(struct __prci_data *pd);
+ u8 cfg0_offs;
+ u8 cfg1_offs;
+};
+
+/**
+ * struct __prci_clock - describes a clock device managed by PRCI
+ * @name: user-readable clock name string - should match the manual
+ * @parent_name: parent name for this clock
+ * @ops: struct clk_ops for the Linux clock framework to use for control
+ * @hw: Linux-private clock data
+ * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
+ * @pd: PRCI-specific data associated with this clock (if not NULL)
+ *
+ * PRCI clock data. Used by the PRCI driver to register PRCI-provided
+ * clocks to the Linux clock infrastructure.
+ */
+struct __prci_clock {
+ const char *name;
+ const char *parent_name;
+ const struct clk_ops *ops;
+ struct clk_hw hw;
+ struct __prci_wrpll_data *pwd;
+ struct __prci_data *pd;
+};
+
+#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
+
+/*
+ * struct prci_clk_desc - describes the information of clocks of each SoCs
+ * @clks: point to a array of __prci_clock
+ * @num_clks: the number of element of clks
+ */
+struct prci_clk_desc {
+ struct __prci_clock *clks;
+ size_t num_clks;
+};
+
+/* Core clock mux control */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd);
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
+void sifive_prci_coreclksel_use_final_corepll(struct __prci_data *pd);
+void sifive_prci_corepllsel_use_dvfscorepll(struct __prci_data *pd);
+void sifive_prci_corepllsel_use_corepll(struct __prci_data *pd);
+void sifive_prci_hfpclkpllsel_use_hfclk(struct __prci_data *pd);
+void sifive_prci_hfpclkpllsel_use_hfpclkpll(struct __prci_data *pd);
+
+/* Linux clock framework integration */
+long sifive_prci_wrpll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate);
+int sifive_prci_wrpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+int sifive_clk_is_enabled(struct clk_hw *hw);
+int sifive_prci_clock_enable(struct clk_hw *hw);
+void sifive_prci_clock_disable(struct clk_hw *hw);
+unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
+unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
+unsigned long sifive_prci_hfpclkplldiv_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+int sifive_prci_pcie_aux_clock_is_enabled(struct clk_hw *hw);
+int sifive_prci_pcie_aux_clock_enable(struct clk_hw *hw);
+void sifive_prci_pcie_aux_clock_disable(struct clk_hw *hw);
+
+#endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */