Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 343 insertions, 0 deletions

diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
new file mode 100644
index 000000000..2ff3044a6
--- /dev/null
+++ b/drivers/hwmon/lm92.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * lm92 - Hardware monitoring driver
+ * Copyright (C) 2005-2008  Jean Delvare <jdelvare@suse.de>
+ *
+ * Based on the lm90 driver, with some ideas taken from the lm_sensors
+ * lm92 driver as well.
+ *
+ * The LM92 is a sensor chip made by National Semiconductor. It reports
+ * its own temperature with a 0.0625 deg resolution and a 0.33 deg
+ * accuracy. Complete datasheet can be obtained from National's website
+ * at:
+ *   http://www.national.com/pf/LM/LM92.html
+ *
+ * This driver also supports the MAX6635 sensor chip made by Maxim.
+ * This chip is compatible with the LM92, but has a lesser accuracy
+ * (1.0 deg). Complete datasheet can be obtained from Maxim's website
+ * at:
+ *   http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
+ *
+ * Since the LM92 was the first chipset supported by this driver, most
+ * comments will refer to this chipset, but are actually general and
+ * concern all supported chipsets, unless mentioned otherwise.
+ *
+ * Support could easily be added for the National Semiconductor LM76
+ * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible
+ * with the LM92.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+
+/*
+ * The LM92 and MAX6635 have 2 two-state pins for address selection,
+ * resulting in 4 possible addresses.
+ */
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
+						I2C_CLIENT_END };
+enum chips { lm92, max6635 };
+
+/* The LM92 registers */
+#define LM92_REG_CONFIG			0x01 /* 8-bit, RW */
+#define LM92_REG_TEMP			0x00 /* 16-bit, RO */
+#define LM92_REG_TEMP_HYST		0x02 /* 16-bit, RW */
+#define LM92_REG_TEMP_CRIT		0x03 /* 16-bit, RW */
+#define LM92_REG_TEMP_LOW		0x04 /* 16-bit, RW */
+#define LM92_REG_TEMP_HIGH		0x05 /* 16-bit, RW */
+#define LM92_REG_MAN_ID			0x07 /* 16-bit, RO, LM92 only */
+
+/*
+ * The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius,
+ * left-justified in 16-bit registers. No rounding is done, with such
+ * a resolution it's just not worth it. Note that the MAX6635 doesn't
+ * make use of the 4 lower bits for limits (i.e. effective resolution
+ * for limits is 1 degree Celsius).
+ */
+static inline int TEMP_FROM_REG(s16 reg)
+{
+	return reg / 8 * 625 / 10;
+}
+
+static inline s16 TEMP_TO_REG(long val)
+{
+	val = clamp_val(val, -60000, 160000);
+	return val * 10 / 625 * 8;
+}
+
+/* Alarm flags are stored in the 3 LSB of the temperature register */
+static inline u8 ALARMS_FROM_REG(s16 reg)
+{
+	return reg & 0x0007;
+}
+
+enum temp_index {
+	t_input,
+	t_crit,
+	t_min,
+	t_max,
+	t_hyst,
+	t_num_regs
+};
+
+static const u8 regs[t_num_regs] = {
+	[t_input] = LM92_REG_TEMP,
+	[t_crit] = LM92_REG_TEMP_CRIT,
+	[t_min] = LM92_REG_TEMP_LOW,
+	[t_max] = LM92_REG_TEMP_HIGH,
+	[t_hyst] = LM92_REG_TEMP_HYST,
+};
+
+/* Client data (each client gets its own) */
+struct lm92_data {
+	struct i2c_client *client;
+	struct mutex update_lock;
+	bool valid; /* false until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	s16 temp[t_num_regs];	/* index with enum temp_index */
+};
+
+/*
+ * Sysfs attributes and callback functions
+ */
+
+static struct lm92_data *lm92_update_device(struct device *dev)
+{
+	struct lm92_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + HZ) ||
+	    !data->valid) {
+		dev_dbg(&client->dev, "Updating lm92 data\n");
+		for (i = 0; i < t_num_regs; i++) {
+			data->temp[i] =
+				i2c_smbus_read_word_swapped(client, regs[i]);
+		}
+		data->last_updated = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm92_data *data = lm92_update_device(dev);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]));
+}
+
+static ssize_t temp_store(struct device *dev,
+			  struct device_attribute *devattr, const char *buf,
+			  size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm92_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int nr = attr->index;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->temp[nr] = TEMP_TO_REG(val);
+	i2c_smbus_write_word_swapped(client, regs[nr], data->temp[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t temp_hyst_show(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm92_data *data = lm92_update_device(dev);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])
+		       - TEMP_FROM_REG(data->temp[t_hyst]));
+}
+
+static ssize_t temp1_min_hyst_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[t_min])
+		       + TEMP_FROM_REG(data->temp[t_hyst]));
+}
+
+static ssize_t temp_hyst_store(struct device *dev,
+			       struct device_attribute *devattr,
+			       const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct lm92_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	val = clamp_val(val, -120000, 220000);
+	mutex_lock(&data->update_lock);
+	data->temp[t_hyst] =
+		TEMP_TO_REG(TEMP_FROM_REG(data->temp[attr->index]) - val);
+	i2c_smbus_write_word_swapped(client, LM92_REG_TEMP_HYST,
+				     data->temp[t_hyst]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct lm92_data *data = lm92_update_device(dev);
+
+	return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp[t_input]));
+}
+
+static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int bitnr = to_sensor_dev_attr(attr)->index;
+	struct lm92_data *data = lm92_update_device(dev);
+	return sprintf(buf, "%d\n", (data->temp[t_input] >> bitnr) & 1);
+}
+
+static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input);
+static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp, t_crit);
+static SENSOR_DEVICE_ATTR_RW(temp1_crit_hyst, temp_hyst, t_crit);
+static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, t_min);
+static DEVICE_ATTR_RO(temp1_min_hyst);
+static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, t_max);
+static SENSOR_DEVICE_ATTR_RO(temp1_max_hyst, temp_hyst, t_max);
+static DEVICE_ATTR_RO(alarms);
+static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 2);
+static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, 0);
+static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 1);
+
+/*
+ * Detection and registration
+ */
+
+static void lm92_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/* Start the conversions if needed */
+	config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG);
+	if (config & 0x01)
+		i2c_smbus_write_byte_data(client, LM92_REG_CONFIG,
+					  config & 0xFE);
+}
+
+static struct attribute *lm92_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&dev_attr_temp1_min_hyst.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
+	&dev_attr_alarms.attr,
+	&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm92);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm92_detect(struct i2c_client *new_client,
+		       struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = new_client->adapter;
+	u8 config;
+	u16 man_id;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
+					    | I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	config = i2c_smbus_read_byte_data(new_client, LM92_REG_CONFIG);
+	man_id = i2c_smbus_read_word_data(new_client, LM92_REG_MAN_ID);
+
+	if ((config & 0xe0) == 0x00 && man_id == 0x0180)
+		pr_info("lm92: Found National Semiconductor LM92 chip\n");
+	else
+		return -ENODEV;
+
+	strscpy(info->type, "lm92", I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int lm92_probe(struct i2c_client *new_client)
+{
+	struct device *hwmon_dev;
+	struct lm92_data *data;
+
+	data = devm_kzalloc(&new_client->dev, sizeof(struct lm92_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = new_client;
+	mutex_init(&data->update_lock);
+
+	/* Initialize the chipset */
+	lm92_init_client(new_client);
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
+							   new_client->name,
+							   data, lm92_groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+/*
+ * Module and driver stuff
+ */
+
+static const struct i2c_device_id lm92_id[] = {
+	{ "lm92", lm92 },
+	{ "max6635", max6635 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm92_id);
+
+static struct i2c_driver lm92_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "lm92",
+	},
+	.probe_new	= lm92_probe,
+	.id_table	= lm92_id,
+	.detect		= lm92_detect,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(lm92_driver);
+
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
+MODULE_DESCRIPTION("LM92/MAX6635 driver");
+MODULE_LICENSE("GPL");