summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc/ab8500-gpadc.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/iio/adc/ab8500-gpadc.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/iio/adc/ab8500-gpadc.c')
-rw-r--r--drivers/iio/adc/ab8500-gpadc.c1209
1 files changed, 1209 insertions, 0 deletions
diff --git a/drivers/iio/adc/ab8500-gpadc.c b/drivers/iio/adc/ab8500-gpadc.c
new file mode 100644
index 000000000..4fa2126a3
--- /dev/null
+++ b/drivers/iio/adc/ab8500-gpadc.c
@@ -0,0 +1,1209 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Daniel Willerud <daniel.willerud@stericsson.com>
+ * Author: Johan Palsson <johan.palsson@stericsson.com>
+ * Author: M'boumba Cedric Madianga
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * AB8500 General Purpose ADC driver. The AB8500 uses reference voltages:
+ * VinVADC, and VADC relative to GND to do its job. It monitors main and backup
+ * battery voltages, AC (mains) voltage, USB cable voltage, as well as voltages
+ * representing the temperature of the chip die and battery, accessory
+ * detection by resistance measurements using relative voltages and GSM burst
+ * information.
+ *
+ * Some of the voltages are measured on external pins on the IC, such as
+ * battery temperature or "ADC aux" 1 and 2. Other voltages are internal rails
+ * from other parts of the ASIC such as main charger voltage, main and battery
+ * backup voltage or USB VBUS voltage. For this reason drivers for other
+ * parts of the system are required to obtain handles to the ADC to do work
+ * for them and the IIO driver provides arbitration among these consumers.
+ */
+#include <linux/init.h>
+#include <linux/bits.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/random.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+
+/* GPADC register offsets and bit definitions */
+
+#define AB8500_GPADC_CTRL1_REG 0x00
+/* GPADC control register 1 bits */
+#define AB8500_GPADC_CTRL1_DISABLE 0x00
+#define AB8500_GPADC_CTRL1_ENABLE BIT(0)
+#define AB8500_GPADC_CTRL1_TRIG_ENA BIT(1)
+#define AB8500_GPADC_CTRL1_START_SW_CONV BIT(2)
+#define AB8500_GPADC_CTRL1_BTEMP_PULL_UP BIT(3)
+/* 0 = use rising edge, 1 = use falling edge */
+#define AB8500_GPADC_CTRL1_TRIG_EDGE BIT(4)
+/* 0 = use VTVOUT, 1 = use VRTC as pull-up supply for battery temp NTC */
+#define AB8500_GPADC_CTRL1_PUPSUPSEL BIT(5)
+#define AB8500_GPADC_CTRL1_BUF_ENA BIT(6)
+#define AB8500_GPADC_CTRL1_ICHAR_ENA BIT(7)
+
+#define AB8500_GPADC_CTRL2_REG 0x01
+#define AB8500_GPADC_CTRL3_REG 0x02
+/*
+ * GPADC control register 2 and 3 bits
+ * the bit layout is the same for SW and HW conversion set-up
+ */
+#define AB8500_GPADC_CTRL2_AVG_1 0x00
+#define AB8500_GPADC_CTRL2_AVG_4 BIT(5)
+#define AB8500_GPADC_CTRL2_AVG_8 BIT(6)
+#define AB8500_GPADC_CTRL2_AVG_16 (BIT(5) | BIT(6))
+
+enum ab8500_gpadc_channel {
+ AB8500_GPADC_CHAN_UNUSED = 0x00,
+ AB8500_GPADC_CHAN_BAT_CTRL = 0x01,
+ AB8500_GPADC_CHAN_BAT_TEMP = 0x02,
+ /* This is not used on AB8505 */
+ AB8500_GPADC_CHAN_MAIN_CHARGER = 0x03,
+ AB8500_GPADC_CHAN_ACC_DET_1 = 0x04,
+ AB8500_GPADC_CHAN_ACC_DET_2 = 0x05,
+ AB8500_GPADC_CHAN_ADC_AUX_1 = 0x06,
+ AB8500_GPADC_CHAN_ADC_AUX_2 = 0x07,
+ AB8500_GPADC_CHAN_VBAT_A = 0x08,
+ AB8500_GPADC_CHAN_VBUS = 0x09,
+ AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT = 0x0a,
+ AB8500_GPADC_CHAN_USB_CHARGER_CURRENT = 0x0b,
+ AB8500_GPADC_CHAN_BACKUP_BAT = 0x0c,
+ /* Only on AB8505 */
+ AB8505_GPADC_CHAN_DIE_TEMP = 0x0d,
+ AB8500_GPADC_CHAN_ID = 0x0e,
+ AB8500_GPADC_CHAN_INTERNAL_TEST_1 = 0x0f,
+ AB8500_GPADC_CHAN_INTERNAL_TEST_2 = 0x10,
+ AB8500_GPADC_CHAN_INTERNAL_TEST_3 = 0x11,
+ /* FIXME: Applicable to all ASIC variants? */
+ AB8500_GPADC_CHAN_XTAL_TEMP = 0x12,
+ AB8500_GPADC_CHAN_VBAT_TRUE_MEAS = 0x13,
+ /* FIXME: Doesn't seem to work with pure AB8500 */
+ AB8500_GPADC_CHAN_BAT_CTRL_AND_IBAT = 0x1c,
+ AB8500_GPADC_CHAN_VBAT_MEAS_AND_IBAT = 0x1d,
+ AB8500_GPADC_CHAN_VBAT_TRUE_MEAS_AND_IBAT = 0x1e,
+ AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT = 0x1f,
+ /*
+ * Virtual channel used only for ibat conversion to ampere.
+ * Battery current conversion (ibat) cannot be requested as a
+ * single conversion but it is always requested in combination
+ * with other input requests.
+ */
+ AB8500_GPADC_CHAN_IBAT_VIRTUAL = 0xFF,
+};
+
+#define AB8500_GPADC_AUTO_TIMER_REG 0x03
+
+#define AB8500_GPADC_STAT_REG 0x04
+#define AB8500_GPADC_STAT_BUSY BIT(0)
+
+#define AB8500_GPADC_MANDATAL_REG 0x05
+#define AB8500_GPADC_MANDATAH_REG 0x06
+#define AB8500_GPADC_AUTODATAL_REG 0x07
+#define AB8500_GPADC_AUTODATAH_REG 0x08
+#define AB8500_GPADC_MUX_CTRL_REG 0x09
+#define AB8540_GPADC_MANDATA2L_REG 0x09
+#define AB8540_GPADC_MANDATA2H_REG 0x0A
+#define AB8540_GPADC_APEAAX_REG 0x10
+#define AB8540_GPADC_APEAAT_REG 0x11
+#define AB8540_GPADC_APEAAM_REG 0x12
+#define AB8540_GPADC_APEAAH_REG 0x13
+#define AB8540_GPADC_APEAAL_REG 0x14
+
+/*
+ * OTP register offsets
+ * Bank : 0x15
+ */
+#define AB8500_GPADC_CAL_1 0x0F
+#define AB8500_GPADC_CAL_2 0x10
+#define AB8500_GPADC_CAL_3 0x11
+#define AB8500_GPADC_CAL_4 0x12
+#define AB8500_GPADC_CAL_5 0x13
+#define AB8500_GPADC_CAL_6 0x14
+#define AB8500_GPADC_CAL_7 0x15
+/* New calibration for 8540 */
+#define AB8540_GPADC_OTP4_REG_7 0x38
+#define AB8540_GPADC_OTP4_REG_6 0x39
+#define AB8540_GPADC_OTP4_REG_5 0x3A
+
+#define AB8540_GPADC_DIS_ZERO 0x00
+#define AB8540_GPADC_EN_VBIAS_XTAL_TEMP 0x02
+
+/* GPADC constants from AB8500 spec, UM0836 */
+#define AB8500_ADC_RESOLUTION 1024
+#define AB8500_ADC_CH_BTEMP_MIN 0
+#define AB8500_ADC_CH_BTEMP_MAX 1350
+#define AB8500_ADC_CH_DIETEMP_MIN 0
+#define AB8500_ADC_CH_DIETEMP_MAX 1350
+#define AB8500_ADC_CH_CHG_V_MIN 0
+#define AB8500_ADC_CH_CHG_V_MAX 20030
+#define AB8500_ADC_CH_ACCDET2_MIN 0
+#define AB8500_ADC_CH_ACCDET2_MAX 2500
+#define AB8500_ADC_CH_VBAT_MIN 2300
+#define AB8500_ADC_CH_VBAT_MAX 4800
+#define AB8500_ADC_CH_CHG_I_MIN 0
+#define AB8500_ADC_CH_CHG_I_MAX 1500
+#define AB8500_ADC_CH_BKBAT_MIN 0
+#define AB8500_ADC_CH_BKBAT_MAX 3200
+
+/* GPADC constants from AB8540 spec */
+#define AB8500_ADC_CH_IBAT_MIN (-6000) /* mA range measured by ADC for ibat */
+#define AB8500_ADC_CH_IBAT_MAX 6000
+#define AB8500_ADC_CH_IBAT_MIN_V (-60) /* mV range measured by ADC for ibat */
+#define AB8500_ADC_CH_IBAT_MAX_V 60
+#define AB8500_GPADC_IBAT_VDROP_L (-56) /* mV */
+#define AB8500_GPADC_IBAT_VDROP_H 56
+
+/* This is used to not lose precision when dividing to get gain and offset */
+#define AB8500_GPADC_CALIB_SCALE 1000
+/*
+ * Number of bits shift used to not lose precision
+ * when dividing to get ibat gain.
+ */
+#define AB8500_GPADC_CALIB_SHIFT_IBAT 20
+
+/* Time in ms before disabling regulator */
+#define AB8500_GPADC_AUTOSUSPEND_DELAY 1
+
+#define AB8500_GPADC_CONVERSION_TIME 500 /* ms */
+
+enum ab8500_cal_channels {
+ AB8500_CAL_VMAIN = 0,
+ AB8500_CAL_BTEMP,
+ AB8500_CAL_VBAT,
+ AB8500_CAL_IBAT,
+ AB8500_CAL_NR,
+};
+
+/**
+ * struct ab8500_adc_cal_data - Table for storing gain and offset for the
+ * calibrated ADC channels
+ * @gain: Gain of the ADC channel
+ * @offset: Offset of the ADC channel
+ * @otp_calib_hi: Calibration from OTP
+ * @otp_calib_lo: Calibration from OTP
+ */
+struct ab8500_adc_cal_data {
+ s64 gain;
+ s64 offset;
+ u16 otp_calib_hi;
+ u16 otp_calib_lo;
+};
+
+/**
+ * struct ab8500_gpadc_chan_info - per-channel GPADC info
+ * @name: name of the channel
+ * @id: the internal AB8500 ID number for the channel
+ * @hardware_control: indicate that we want to use hardware ADC control
+ * on this channel, the default is software ADC control. Hardware control
+ * is normally only used to test the battery voltage during GSM bursts
+ * and needs a hardware trigger on the GPADCTrig pin of the ASIC.
+ * @falling_edge: indicate that we want to trigger on falling edge
+ * rather than rising edge, rising edge is the default
+ * @avg_sample: how many samples to average: must be 1, 4, 8 or 16.
+ * @trig_timer: how long to wait for the trigger, in 32kHz periods:
+ * 0 .. 255 periods
+ */
+struct ab8500_gpadc_chan_info {
+ const char *name;
+ u8 id;
+ bool hardware_control;
+ bool falling_edge;
+ u8 avg_sample;
+ u8 trig_timer;
+};
+
+/**
+ * struct ab8500_gpadc - AB8500 GPADC device information
+ * @dev: pointer to the containing device
+ * @ab8500: pointer to the parent AB8500 device
+ * @chans: internal per-channel information container
+ * @nchans: number of channels
+ * @complete: pointer to the completion that indicates
+ * the completion of an gpadc conversion cycle
+ * @vddadc: pointer to the regulator supplying VDDADC
+ * @irq_sw: interrupt number that is used by gpadc for software ADC conversion
+ * @irq_hw: interrupt number that is used by gpadc for hardware ADC conversion
+ * @cal_data: array of ADC calibration data structs
+ */
+struct ab8500_gpadc {
+ struct device *dev;
+ struct ab8500 *ab8500;
+ struct ab8500_gpadc_chan_info *chans;
+ unsigned int nchans;
+ struct completion complete;
+ struct regulator *vddadc;
+ int irq_sw;
+ int irq_hw;
+ struct ab8500_adc_cal_data cal_data[AB8500_CAL_NR];
+};
+
+static struct ab8500_gpadc_chan_info *
+ab8500_gpadc_get_channel(struct ab8500_gpadc *gpadc, u8 chan)
+{
+ struct ab8500_gpadc_chan_info *ch;
+ int i;
+
+ for (i = 0; i < gpadc->nchans; i++) {
+ ch = &gpadc->chans[i];
+ if (ch->id == chan)
+ break;
+ }
+ if (i == gpadc->nchans)
+ return NULL;
+
+ return ch;
+}
+
+/**
+ * ab8500_gpadc_ad_to_voltage() - Convert a raw ADC value to a voltage
+ * @gpadc: GPADC instance
+ * @ch: the sampled channel this raw value is coming from
+ * @ad_value: the raw value
+ */
+static int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc,
+ enum ab8500_gpadc_channel ch,
+ int ad_value)
+{
+ int res;
+
+ switch (ch) {
+ case AB8500_GPADC_CHAN_MAIN_CHARGER:
+ /* No calibration data available: just interpolate */
+ if (!gpadc->cal_data[AB8500_CAL_VMAIN].gain) {
+ res = AB8500_ADC_CH_CHG_V_MIN + (AB8500_ADC_CH_CHG_V_MAX -
+ AB8500_ADC_CH_CHG_V_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+ }
+ /* Here we can use calibration */
+ res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_VMAIN].gain +
+ gpadc->cal_data[AB8500_CAL_VMAIN].offset) / AB8500_GPADC_CALIB_SCALE;
+ break;
+
+ case AB8500_GPADC_CHAN_BAT_CTRL:
+ case AB8500_GPADC_CHAN_BAT_TEMP:
+ case AB8500_GPADC_CHAN_ACC_DET_1:
+ case AB8500_GPADC_CHAN_ADC_AUX_1:
+ case AB8500_GPADC_CHAN_ADC_AUX_2:
+ case AB8500_GPADC_CHAN_XTAL_TEMP:
+ /* No calibration data available: just interpolate */
+ if (!gpadc->cal_data[AB8500_CAL_BTEMP].gain) {
+ res = AB8500_ADC_CH_BTEMP_MIN + (AB8500_ADC_CH_BTEMP_MAX -
+ AB8500_ADC_CH_BTEMP_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+ }
+ /* Here we can use calibration */
+ res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_BTEMP].gain +
+ gpadc->cal_data[AB8500_CAL_BTEMP].offset) / AB8500_GPADC_CALIB_SCALE;
+ break;
+
+ case AB8500_GPADC_CHAN_VBAT_A:
+ case AB8500_GPADC_CHAN_VBAT_TRUE_MEAS:
+ /* No calibration data available: just interpolate */
+ if (!gpadc->cal_data[AB8500_CAL_VBAT].gain) {
+ res = AB8500_ADC_CH_VBAT_MIN + (AB8500_ADC_CH_VBAT_MAX -
+ AB8500_ADC_CH_VBAT_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+ }
+ /* Here we can use calibration */
+ res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_VBAT].gain +
+ gpadc->cal_data[AB8500_CAL_VBAT].offset) / AB8500_GPADC_CALIB_SCALE;
+ break;
+
+ case AB8505_GPADC_CHAN_DIE_TEMP:
+ res = AB8500_ADC_CH_DIETEMP_MIN +
+ (AB8500_ADC_CH_DIETEMP_MAX - AB8500_ADC_CH_DIETEMP_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+
+ case AB8500_GPADC_CHAN_ACC_DET_2:
+ res = AB8500_ADC_CH_ACCDET2_MIN +
+ (AB8500_ADC_CH_ACCDET2_MAX - AB8500_ADC_CH_ACCDET2_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+
+ case AB8500_GPADC_CHAN_VBUS:
+ res = AB8500_ADC_CH_CHG_V_MIN +
+ (AB8500_ADC_CH_CHG_V_MAX - AB8500_ADC_CH_CHG_V_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+
+ case AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT:
+ case AB8500_GPADC_CHAN_USB_CHARGER_CURRENT:
+ res = AB8500_ADC_CH_CHG_I_MIN +
+ (AB8500_ADC_CH_CHG_I_MAX - AB8500_ADC_CH_CHG_I_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+
+ case AB8500_GPADC_CHAN_BACKUP_BAT:
+ res = AB8500_ADC_CH_BKBAT_MIN +
+ (AB8500_ADC_CH_BKBAT_MAX - AB8500_ADC_CH_BKBAT_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+
+ case AB8500_GPADC_CHAN_IBAT_VIRTUAL:
+ /* No calibration data available: just interpolate */
+ if (!gpadc->cal_data[AB8500_CAL_IBAT].gain) {
+ res = AB8500_ADC_CH_IBAT_MIN + (AB8500_ADC_CH_IBAT_MAX -
+ AB8500_ADC_CH_IBAT_MIN) * ad_value /
+ AB8500_ADC_RESOLUTION;
+ break;
+ }
+ /* Here we can use calibration */
+ res = (int) (ad_value * gpadc->cal_data[AB8500_CAL_IBAT].gain +
+ gpadc->cal_data[AB8500_CAL_IBAT].offset)
+ >> AB8500_GPADC_CALIB_SHIFT_IBAT;
+ break;
+
+ default:
+ dev_err(gpadc->dev,
+ "unknown channel ID: %d, not possible to convert\n",
+ ch);
+ res = -EINVAL;
+ break;
+
+ }
+
+ return res;
+}
+
+static int ab8500_gpadc_read(struct ab8500_gpadc *gpadc,
+ const struct ab8500_gpadc_chan_info *ch,
+ int *ibat)
+{
+ int ret;
+ int looplimit = 0;
+ unsigned long completion_timeout;
+ u8 val;
+ u8 low_data, high_data, low_data2, high_data2;
+ u8 ctrl1;
+ u8 ctrl23;
+ unsigned int delay_min = 0;
+ unsigned int delay_max = 0;
+ u8 data_low_addr, data_high_addr;
+
+ if (!gpadc)
+ return -ENODEV;
+
+ /* check if conversion is supported */
+ if ((gpadc->irq_sw <= 0) && !ch->hardware_control)
+ return -ENOTSUPP;
+ if ((gpadc->irq_hw <= 0) && ch->hardware_control)
+ return -ENOTSUPP;
+
+ /* Enable vddadc by grabbing PM runtime */
+ pm_runtime_get_sync(gpadc->dev);
+
+ /* Check if ADC is not busy, lock and proceed */
+ do {
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_STAT_REG, &val);
+ if (ret < 0)
+ goto out;
+ if (!(val & AB8500_GPADC_STAT_BUSY))
+ break;
+ msleep(20);
+ } while (++looplimit < 10);
+ if (looplimit >= 10 && (val & AB8500_GPADC_STAT_BUSY)) {
+ dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Enable GPADC */
+ ctrl1 = AB8500_GPADC_CTRL1_ENABLE;
+
+ /* Select the channel source and set average samples */
+ switch (ch->avg_sample) {
+ case 1:
+ ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_1;
+ break;
+ case 4:
+ ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_4;
+ break;
+ case 8:
+ ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_8;
+ break;
+ default:
+ ctrl23 = ch->id | AB8500_GPADC_CTRL2_AVG_16;
+ break;
+ }
+
+ if (ch->hardware_control) {
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL3_REG, ctrl23);
+ ctrl1 |= AB8500_GPADC_CTRL1_TRIG_ENA;
+ if (ch->falling_edge)
+ ctrl1 |= AB8500_GPADC_CTRL1_TRIG_EDGE;
+ } else {
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL2_REG, ctrl23);
+ }
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: set avg samples failed\n");
+ goto out;
+ }
+
+ /*
+ * Enable ADC, buffering, select rising edge and enable ADC path
+ * charging current sense if it needed, ABB 3.0 needs some special
+ * treatment too.
+ */
+ switch (ch->id) {
+ case AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT:
+ case AB8500_GPADC_CHAN_USB_CHARGER_CURRENT:
+ ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA |
+ AB8500_GPADC_CTRL1_ICHAR_ENA;
+ break;
+ case AB8500_GPADC_CHAN_BAT_TEMP:
+ if (!is_ab8500_2p0_or_earlier(gpadc->ab8500)) {
+ ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA |
+ AB8500_GPADC_CTRL1_BTEMP_PULL_UP;
+ /*
+ * Delay might be needed for ABB8500 cut 3.0, if not,
+ * remove when hardware will be available
+ */
+ delay_min = 1000; /* Delay in micro seconds */
+ delay_max = 10000; /* large range optimises sleepmode */
+ break;
+ }
+ fallthrough;
+ default:
+ ctrl1 |= AB8500_GPADC_CTRL1_BUF_ENA;
+ break;
+ }
+
+ /* Write configuration to control register 1 */
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG, ctrl1);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: set Control register failed\n");
+ goto out;
+ }
+
+ if (delay_min != 0)
+ usleep_range(delay_min, delay_max);
+
+ if (ch->hardware_control) {
+ /* Set trigger delay timer */
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG,
+ ch->trig_timer);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: trig timer failed\n");
+ goto out;
+ }
+ completion_timeout = 2 * HZ;
+ data_low_addr = AB8500_GPADC_AUTODATAL_REG;
+ data_high_addr = AB8500_GPADC_AUTODATAH_REG;
+ } else {
+ /* Start SW conversion */
+ ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
+ AB8500_GPADC_CTRL1_START_SW_CONV,
+ AB8500_GPADC_CTRL1_START_SW_CONV);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: start s/w conv failed\n");
+ goto out;
+ }
+ completion_timeout = msecs_to_jiffies(AB8500_GPADC_CONVERSION_TIME);
+ data_low_addr = AB8500_GPADC_MANDATAL_REG;
+ data_high_addr = AB8500_GPADC_MANDATAH_REG;
+ }
+
+ /* Wait for completion of conversion */
+ if (!wait_for_completion_timeout(&gpadc->complete,
+ completion_timeout)) {
+ dev_err(gpadc->dev,
+ "timeout didn't receive GPADC conv interrupt\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Read the converted RAW data */
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_low_addr, &low_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read low data failed\n");
+ goto out;
+ }
+
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_high_addr, &high_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read high data failed\n");
+ goto out;
+ }
+
+ /* Check if double conversion is required */
+ if ((ch->id == AB8500_GPADC_CHAN_BAT_CTRL_AND_IBAT) ||
+ (ch->id == AB8500_GPADC_CHAN_VBAT_MEAS_AND_IBAT) ||
+ (ch->id == AB8500_GPADC_CHAN_VBAT_TRUE_MEAS_AND_IBAT) ||
+ (ch->id == AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT)) {
+
+ if (ch->hardware_control) {
+ /* not supported */
+ ret = -ENOTSUPP;
+ dev_err(gpadc->dev,
+ "gpadc_conversion: only SW double conversion supported\n");
+ goto out;
+ } else {
+ /* Read the converted RAW data 2 */
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8540_GPADC_MANDATA2L_REG,
+ &low_data2);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw low data 2 failed\n");
+ goto out;
+ }
+
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8540_GPADC_MANDATA2H_REG,
+ &high_data2);
+ if (ret < 0) {
+ dev_err(gpadc->dev,
+ "gpadc_conversion: read sw high data 2 failed\n");
+ goto out;
+ }
+ if (ibat != NULL) {
+ *ibat = (high_data2 << 8) | low_data2;
+ } else {
+ dev_warn(gpadc->dev,
+ "gpadc_conversion: ibat not stored\n");
+ }
+
+ }
+ }
+
+ /* Disable GPADC */
+ ret = abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
+ AB8500_GPADC_CTRL1_REG, AB8500_GPADC_CTRL1_DISABLE);
+ if (ret < 0) {
+ dev_err(gpadc->dev, "gpadc_conversion: disable gpadc failed\n");
+ goto out;
+ }
+
+ /* This eventually drops the regulator */
+ pm_runtime_mark_last_busy(gpadc->dev);
+ pm_runtime_put_autosuspend(gpadc->dev);
+
+ return (high_data << 8) | low_data;
+
+out:
+ /*
+ * It has shown to be needed to turn off the GPADC if an error occurs,
+ * otherwise we might have problem when waiting for the busy bit in the
+ * GPADC status register to go low. In V1.1 there wait_for_completion
+ * seems to timeout when waiting for an interrupt.. Not seen in V2.0
+ */
+ (void) abx500_set_register_interruptible(gpadc->dev, AB8500_GPADC,
+ AB8500_GPADC_CTRL1_REG, AB8500_GPADC_CTRL1_DISABLE);
+ pm_runtime_put(gpadc->dev);
+ dev_err(gpadc->dev,
+ "gpadc_conversion: Failed to AD convert channel %d\n", ch->id);
+
+ return ret;
+}
+
+/**
+ * ab8500_bm_gpadcconvend_handler() - isr for gpadc conversion completion
+ * @irq: irq number
+ * @data: pointer to the data passed during request irq
+ *
+ * This is a interrupt service routine for gpadc conversion completion.
+ * Notifies the gpadc completion is completed and the converted raw value
+ * can be read from the registers.
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_bm_gpadcconvend_handler(int irq, void *data)
+{
+ struct ab8500_gpadc *gpadc = data;
+
+ complete(&gpadc->complete);
+
+ return IRQ_HANDLED;
+}
+
+static int otp_cal_regs[] = {
+ AB8500_GPADC_CAL_1,
+ AB8500_GPADC_CAL_2,
+ AB8500_GPADC_CAL_3,
+ AB8500_GPADC_CAL_4,
+ AB8500_GPADC_CAL_5,
+ AB8500_GPADC_CAL_6,
+ AB8500_GPADC_CAL_7,
+};
+
+static int otp4_cal_regs[] = {
+ AB8540_GPADC_OTP4_REG_7,
+ AB8540_GPADC_OTP4_REG_6,
+ AB8540_GPADC_OTP4_REG_5,
+};
+
+static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
+{
+ int i;
+ int ret[ARRAY_SIZE(otp_cal_regs)];
+ u8 gpadc_cal[ARRAY_SIZE(otp_cal_regs)];
+ int ret_otp4[ARRAY_SIZE(otp4_cal_regs)];
+ u8 gpadc_otp4[ARRAY_SIZE(otp4_cal_regs)];
+ int vmain_high, vmain_low;
+ int btemp_high, btemp_low;
+ int vbat_high, vbat_low;
+ int ibat_high, ibat_low;
+ s64 V_gain, V_offset, V2A_gain, V2A_offset;
+
+ /* First we read all OTP registers and store the error code */
+ for (i = 0; i < ARRAY_SIZE(otp_cal_regs); i++) {
+ ret[i] = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_OTP_EMUL, otp_cal_regs[i], &gpadc_cal[i]);
+ if (ret[i] < 0) {
+ /* Continue anyway: maybe the other registers are OK */
+ dev_err(gpadc->dev, "%s: read otp reg 0x%02x failed\n",
+ __func__, otp_cal_regs[i]);
+ } else {
+ /* Put this in the entropy pool as device-unique */
+ add_device_randomness(&ret[i], sizeof(ret[i]));
+ }
+ }
+
+ /*
+ * The ADC calibration data is stored in OTP registers.
+ * The layout of the calibration data is outlined below and a more
+ * detailed description can be found in UM0836
+ *
+ * vm_h/l = vmain_high/low
+ * bt_h/l = btemp_high/low
+ * vb_h/l = vbat_high/low
+ *
+ * Data bits 8500/9540:
+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | | vm_h9 | vm_h8
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ *
+ * Data bits 8540:
+ * OTP2
+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * |
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vm_h9 | vm_h8 | vm_h7 | vm_h6 | vm_h5 | vm_h4 | vm_h3 | vm_h2
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vm_h1 | vm_h0 | vm_l4 | vm_l3 | vm_l2 | vm_l1 | vm_l0 | bt_h9
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h8 | bt_h7 | bt_h6 | bt_h5 | bt_h4 | bt_h3 | bt_h2 | bt_h1
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | bt_h0 | bt_l4 | bt_l3 | bt_l2 | bt_l1 | bt_l0 | vb_h9 | vb_h8
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_h7 | vb_h6 | vb_h5 | vb_h4 | vb_h3 | vb_h2 | vb_h1 | vb_h0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | vb_l5 | vb_l4 | vb_l3 | vb_l2 | vb_l1 | vb_l0 |
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ *
+ * Data bits 8540:
+ * OTP4
+ * | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | | ib_h9 | ib_h8 | ib_h7
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | ib_h6 | ib_h5 | ib_h4 | ib_h3 | ib_h2 | ib_h1 | ib_h0 | ib_l5
+ * |.......|.......|.......|.......|.......|.......|.......|.......
+ * | ib_l4 | ib_l3 | ib_l2 | ib_l1 | ib_l0 |
+ *
+ *
+ * Ideal output ADC codes corresponding to injected input voltages
+ * during manufacturing is:
+ *
+ * vmain_high: Vin = 19500mV / ADC ideal code = 997
+ * vmain_low: Vin = 315mV / ADC ideal code = 16
+ * btemp_high: Vin = 1300mV / ADC ideal code = 985
+ * btemp_low: Vin = 21mV / ADC ideal code = 16
+ * vbat_high: Vin = 4700mV / ADC ideal code = 982
+ * vbat_low: Vin = 2380mV / ADC ideal code = 33
+ */
+
+ if (is_ab8540(gpadc->ab8500)) {
+ /* Calculate gain and offset for VMAIN if all reads succeeded*/
+ if (!(ret[1] < 0 || ret[2] < 0)) {
+ vmain_high = (((gpadc_cal[1] & 0xFF) << 2) |
+ ((gpadc_cal[2] & 0xC0) >> 6));
+ vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+ gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_hi =
+ (u16)vmain_high;
+ gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_lo =
+ (u16)vmain_low;
+
+ gpadc->cal_data[AB8500_CAL_VMAIN].gain = AB8500_GPADC_CALIB_SCALE *
+ (19500 - 315) / (vmain_high - vmain_low);
+ gpadc->cal_data[AB8500_CAL_VMAIN].offset = AB8500_GPADC_CALIB_SCALE *
+ 19500 - (AB8500_GPADC_CALIB_SCALE * (19500 - 315) /
+ (vmain_high - vmain_low)) * vmain_high;
+ } else {
+ gpadc->cal_data[AB8500_CAL_VMAIN].gain = 0;
+ }
+
+ /* Read IBAT calibration Data */
+ for (i = 0; i < ARRAY_SIZE(otp4_cal_regs); i++) {
+ ret_otp4[i] = abx500_get_register_interruptible(
+ gpadc->dev, AB8500_OTP_EMUL,
+ otp4_cal_regs[i], &gpadc_otp4[i]);
+ if (ret_otp4[i] < 0)
+ dev_err(gpadc->dev,
+ "%s: read otp4 reg 0x%02x failed\n",
+ __func__, otp4_cal_regs[i]);
+ }
+
+ /* Calculate gain and offset for IBAT if all reads succeeded */
+ if (!(ret_otp4[0] < 0 || ret_otp4[1] < 0 || ret_otp4[2] < 0)) {
+ ibat_high = (((gpadc_otp4[0] & 0x07) << 7) |
+ ((gpadc_otp4[1] & 0xFE) >> 1));
+ ibat_low = (((gpadc_otp4[1] & 0x01) << 5) |
+ ((gpadc_otp4[2] & 0xF8) >> 3));
+
+ gpadc->cal_data[AB8500_CAL_IBAT].otp_calib_hi =
+ (u16)ibat_high;
+ gpadc->cal_data[AB8500_CAL_IBAT].otp_calib_lo =
+ (u16)ibat_low;
+
+ V_gain = ((AB8500_GPADC_IBAT_VDROP_H - AB8500_GPADC_IBAT_VDROP_L)
+ << AB8500_GPADC_CALIB_SHIFT_IBAT) / (ibat_high - ibat_low);
+
+ V_offset = (AB8500_GPADC_IBAT_VDROP_H << AB8500_GPADC_CALIB_SHIFT_IBAT) -
+ (((AB8500_GPADC_IBAT_VDROP_H - AB8500_GPADC_IBAT_VDROP_L) <<
+ AB8500_GPADC_CALIB_SHIFT_IBAT) / (ibat_high - ibat_low))
+ * ibat_high;
+ /*
+ * Result obtained is in mV (at a scale factor),
+ * we need to calculate gain and offset to get mA
+ */
+ V2A_gain = (AB8500_ADC_CH_IBAT_MAX - AB8500_ADC_CH_IBAT_MIN)/
+ (AB8500_ADC_CH_IBAT_MAX_V - AB8500_ADC_CH_IBAT_MIN_V);
+ V2A_offset = ((AB8500_ADC_CH_IBAT_MAX_V * AB8500_ADC_CH_IBAT_MIN -
+ AB8500_ADC_CH_IBAT_MAX * AB8500_ADC_CH_IBAT_MIN_V)
+ << AB8500_GPADC_CALIB_SHIFT_IBAT)
+ / (AB8500_ADC_CH_IBAT_MAX_V - AB8500_ADC_CH_IBAT_MIN_V);
+
+ gpadc->cal_data[AB8500_CAL_IBAT].gain =
+ V_gain * V2A_gain;
+ gpadc->cal_data[AB8500_CAL_IBAT].offset =
+ V_offset * V2A_gain + V2A_offset;
+ } else {
+ gpadc->cal_data[AB8500_CAL_IBAT].gain = 0;
+ }
+ } else {
+ /* Calculate gain and offset for VMAIN if all reads succeeded */
+ if (!(ret[0] < 0 || ret[1] < 0 || ret[2] < 0)) {
+ vmain_high = (((gpadc_cal[0] & 0x03) << 8) |
+ ((gpadc_cal[1] & 0x3F) << 2) |
+ ((gpadc_cal[2] & 0xC0) >> 6));
+ vmain_low = ((gpadc_cal[2] & 0x3E) >> 1);
+
+ gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_hi =
+ (u16)vmain_high;
+ gpadc->cal_data[AB8500_CAL_VMAIN].otp_calib_lo =
+ (u16)vmain_low;
+
+ gpadc->cal_data[AB8500_CAL_VMAIN].gain = AB8500_GPADC_CALIB_SCALE *
+ (19500 - 315) / (vmain_high - vmain_low);
+
+ gpadc->cal_data[AB8500_CAL_VMAIN].offset = AB8500_GPADC_CALIB_SCALE *
+ 19500 - (AB8500_GPADC_CALIB_SCALE * (19500 - 315) /
+ (vmain_high - vmain_low)) * vmain_high;
+ } else {
+ gpadc->cal_data[AB8500_CAL_VMAIN].gain = 0;
+ }
+ }
+
+ /* Calculate gain and offset for BTEMP if all reads succeeded */
+ if (!(ret[2] < 0 || ret[3] < 0 || ret[4] < 0)) {
+ btemp_high = (((gpadc_cal[2] & 0x01) << 9) |
+ (gpadc_cal[3] << 1) | ((gpadc_cal[4] & 0x80) >> 7));
+ btemp_low = ((gpadc_cal[4] & 0x7C) >> 2);
+
+ gpadc->cal_data[AB8500_CAL_BTEMP].otp_calib_hi = (u16)btemp_high;
+ gpadc->cal_data[AB8500_CAL_BTEMP].otp_calib_lo = (u16)btemp_low;
+
+ gpadc->cal_data[AB8500_CAL_BTEMP].gain =
+ AB8500_GPADC_CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low);
+ gpadc->cal_data[AB8500_CAL_BTEMP].offset = AB8500_GPADC_CALIB_SCALE * 1300 -
+ (AB8500_GPADC_CALIB_SCALE * (1300 - 21) / (btemp_high - btemp_low))
+ * btemp_high;
+ } else {
+ gpadc->cal_data[AB8500_CAL_BTEMP].gain = 0;
+ }
+
+ /* Calculate gain and offset for VBAT if all reads succeeded */
+ if (!(ret[4] < 0 || ret[5] < 0 || ret[6] < 0)) {
+ vbat_high = (((gpadc_cal[4] & 0x03) << 8) | gpadc_cal[5]);
+ vbat_low = ((gpadc_cal[6] & 0xFC) >> 2);
+
+ gpadc->cal_data[AB8500_CAL_VBAT].otp_calib_hi = (u16)vbat_high;
+ gpadc->cal_data[AB8500_CAL_VBAT].otp_calib_lo = (u16)vbat_low;
+
+ gpadc->cal_data[AB8500_CAL_VBAT].gain = AB8500_GPADC_CALIB_SCALE *
+ (4700 - 2380) / (vbat_high - vbat_low);
+ gpadc->cal_data[AB8500_CAL_VBAT].offset = AB8500_GPADC_CALIB_SCALE * 4700 -
+ (AB8500_GPADC_CALIB_SCALE * (4700 - 2380) /
+ (vbat_high - vbat_low)) * vbat_high;
+ } else {
+ gpadc->cal_data[AB8500_CAL_VBAT].gain = 0;
+ }
+}
+
+static int ab8500_gpadc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+ const struct ab8500_gpadc_chan_info *ch;
+ int raw_val;
+ int processed;
+
+ ch = ab8500_gpadc_get_channel(gpadc, chan->address);
+ if (!ch) {
+ dev_err(gpadc->dev, "no such channel %lu\n",
+ chan->address);
+ return -EINVAL;
+ }
+
+ raw_val = ab8500_gpadc_read(gpadc, ch, NULL);
+ if (raw_val < 0)
+ return raw_val;
+
+ if (mask == IIO_CHAN_INFO_RAW) {
+ *val = raw_val;
+ return IIO_VAL_INT;
+ }
+
+ if (mask == IIO_CHAN_INFO_PROCESSED) {
+ processed = ab8500_gpadc_ad_to_voltage(gpadc, ch->id, raw_val);
+ if (processed < 0)
+ return processed;
+
+ /* Return millivolt or milliamps or millicentigrades */
+ *val = processed;
+ return IIO_VAL_INT;
+ }
+
+ return -EINVAL;
+}
+
+static int ab8500_gpadc_fwnode_xlate(struct iio_dev *indio_dev,
+ const struct fwnode_reference_args *iiospec)
+{
+ int i;
+
+ for (i = 0; i < indio_dev->num_channels; i++)
+ if (indio_dev->channels[i].channel == iiospec->args[0])
+ return i;
+
+ return -EINVAL;
+}
+
+static const struct iio_info ab8500_gpadc_info = {
+ .fwnode_xlate = ab8500_gpadc_fwnode_xlate,
+ .read_raw = ab8500_gpadc_read_raw,
+};
+
+static int ab8500_gpadc_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+
+ regulator_disable(gpadc->vddadc);
+
+ return 0;
+}
+
+static int ab8500_gpadc_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(gpadc->vddadc);
+ if (ret)
+ dev_err(dev, "Failed to enable vddadc: %d\n", ret);
+
+ return ret;
+}
+
+/**
+ * ab8500_gpadc_parse_channel() - process devicetree channel configuration
+ * @dev: pointer to containing device
+ * @fwnode: fw node for the channel to configure
+ * @ch: channel info to fill in
+ * @iio_chan: IIO channel specification to fill in
+ *
+ * The devicetree will set up the channel for use with the specific device,
+ * and define usage for things like AUX GPADC inputs more precisely.
+ */
+static int ab8500_gpadc_parse_channel(struct device *dev,
+ struct fwnode_handle *fwnode,
+ struct ab8500_gpadc_chan_info *ch,
+ struct iio_chan_spec *iio_chan)
+{
+ const char *name = fwnode_get_name(fwnode);
+ u32 chan;
+ int ret;
+
+ ret = fwnode_property_read_u32(fwnode, "reg", &chan);
+ if (ret) {
+ dev_err(dev, "invalid channel number %s\n", name);
+ return ret;
+ }
+ if (chan > AB8500_GPADC_CHAN_BAT_TEMP_AND_IBAT) {
+ dev_err(dev, "%s channel number out of range %d\n", name, chan);
+ return -EINVAL;
+ }
+
+ iio_chan->channel = chan;
+ iio_chan->datasheet_name = name;
+ iio_chan->indexed = 1;
+ iio_chan->address = chan;
+ iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_PROCESSED);
+ /* Most are voltages (also temperatures), some are currents */
+ if ((chan == AB8500_GPADC_CHAN_MAIN_CHARGER_CURRENT) ||
+ (chan == AB8500_GPADC_CHAN_USB_CHARGER_CURRENT))
+ iio_chan->type = IIO_CURRENT;
+ else
+ iio_chan->type = IIO_VOLTAGE;
+
+ ch->id = chan;
+
+ /* Sensible defaults */
+ ch->avg_sample = 16;
+ ch->hardware_control = false;
+ ch->falling_edge = false;
+ ch->trig_timer = 0;
+
+ return 0;
+}
+
+/**
+ * ab8500_gpadc_parse_channels() - Parse the GPADC channels from DT
+ * @gpadc: the GPADC to configure the channels for
+ * @chans: the IIO channels we parsed
+ * @nchans: the number of IIO channels we parsed
+ */
+static int ab8500_gpadc_parse_channels(struct ab8500_gpadc *gpadc,
+ struct iio_chan_spec **chans_parsed,
+ unsigned int *nchans_parsed)
+{
+ struct fwnode_handle *child;
+ struct ab8500_gpadc_chan_info *ch;
+ struct iio_chan_spec *iio_chans;
+ unsigned int nchans;
+ int i;
+
+ nchans = device_get_child_node_count(gpadc->dev);
+ if (!nchans) {
+ dev_err(gpadc->dev, "no channel children\n");
+ return -ENODEV;
+ }
+ dev_info(gpadc->dev, "found %d ADC channels\n", nchans);
+
+ iio_chans = devm_kcalloc(gpadc->dev, nchans,
+ sizeof(*iio_chans), GFP_KERNEL);
+ if (!iio_chans)
+ return -ENOMEM;
+
+ gpadc->chans = devm_kcalloc(gpadc->dev, nchans,
+ sizeof(*gpadc->chans), GFP_KERNEL);
+ if (!gpadc->chans)
+ return -ENOMEM;
+
+ i = 0;
+ device_for_each_child_node(gpadc->dev, child) {
+ struct iio_chan_spec *iio_chan;
+ int ret;
+
+ ch = &gpadc->chans[i];
+ iio_chan = &iio_chans[i];
+
+ ret = ab8500_gpadc_parse_channel(gpadc->dev, child, ch,
+ iio_chan);
+ if (ret) {
+ fwnode_handle_put(child);
+ return ret;
+ }
+ i++;
+ }
+ gpadc->nchans = nchans;
+ *chans_parsed = iio_chans;
+ *nchans_parsed = nchans;
+
+ return 0;
+}
+
+static int ab8500_gpadc_probe(struct platform_device *pdev)
+{
+ struct ab8500_gpadc *gpadc;
+ struct iio_dev *indio_dev;
+ struct device *dev = &pdev->dev;
+ struct iio_chan_spec *iio_chans;
+ unsigned int n_iio_chans;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*gpadc));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, indio_dev);
+ gpadc = iio_priv(indio_dev);
+
+ gpadc->dev = dev;
+ gpadc->ab8500 = dev_get_drvdata(dev->parent);
+
+ ret = ab8500_gpadc_parse_channels(gpadc, &iio_chans, &n_iio_chans);
+ if (ret)
+ return ret;
+
+ gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
+ if (gpadc->irq_sw < 0)
+ return dev_err_probe(dev, gpadc->irq_sw,
+ "failed to get platform sw_conv_end irq\n");
+
+ if (is_ab8500(gpadc->ab8500)) {
+ gpadc->irq_hw = platform_get_irq_byname(pdev, "HW_CONV_END");
+ if (gpadc->irq_hw < 0)
+ return dev_err_probe(dev, gpadc->irq_hw,
+ "failed to get platform hw_conv_end irq\n");
+ } else {
+ gpadc->irq_hw = 0;
+ }
+
+ /* Initialize completion used to notify completion of conversion */
+ init_completion(&gpadc->complete);
+
+ /* Request interrupts */
+ ret = devm_request_threaded_irq(dev, gpadc->irq_sw, NULL,
+ ab8500_bm_gpadcconvend_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
+ "ab8500-gpadc-sw", gpadc);
+ if (ret < 0) {
+ dev_err(dev,
+ "failed to request sw conversion irq %d\n",
+ gpadc->irq_sw);
+ return ret;
+ }
+
+ if (gpadc->irq_hw) {
+ ret = devm_request_threaded_irq(dev, gpadc->irq_hw, NULL,
+ ab8500_bm_gpadcconvend_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
+ "ab8500-gpadc-hw", gpadc);
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to request hw conversion irq: %d\n",
+ gpadc->irq_hw);
+ return ret;
+ }
+ }
+
+ /* The VTVout LDO used to power the AB8500 GPADC */
+ gpadc->vddadc = devm_regulator_get(dev, "vddadc");
+ if (IS_ERR(gpadc->vddadc))
+ return dev_err_probe(dev, PTR_ERR(gpadc->vddadc),
+ "failed to get vddadc\n");
+
+ ret = regulator_enable(gpadc->vddadc);
+ if (ret) {
+ dev_err(dev, "failed to enable vddadc: %d\n", ret);
+ return ret;
+ }
+
+ /* Enable runtime PM */
+ pm_runtime_get_noresume(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_set_autosuspend_delay(dev, AB8500_GPADC_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(dev);
+
+ ab8500_gpadc_read_calibration_data(gpadc);
+
+ pm_runtime_put(dev);
+
+ indio_dev->name = "ab8500-gpadc";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &ab8500_gpadc_info;
+ indio_dev->channels = iio_chans;
+ indio_dev->num_channels = n_iio_chans;
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ goto out_dis_pm;
+
+ return 0;
+
+out_dis_pm:
+ pm_runtime_get_sync(dev);
+ pm_runtime_put_noidle(dev);
+ pm_runtime_disable(dev);
+ regulator_disable(gpadc->vddadc);
+
+ return ret;
+}
+
+static int ab8500_gpadc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct ab8500_gpadc *gpadc = iio_priv(indio_dev);
+
+ pm_runtime_get_sync(gpadc->dev);
+ pm_runtime_put_noidle(gpadc->dev);
+ pm_runtime_disable(gpadc->dev);
+ regulator_disable(gpadc->vddadc);
+
+ return 0;
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(ab8500_gpadc_pm_ops,
+ ab8500_gpadc_runtime_suspend,
+ ab8500_gpadc_runtime_resume, NULL);
+
+static struct platform_driver ab8500_gpadc_driver = {
+ .probe = ab8500_gpadc_probe,
+ .remove = ab8500_gpadc_remove,
+ .driver = {
+ .name = "ab8500-gpadc",
+ .pm = pm_ptr(&ab8500_gpadc_pm_ops),
+ },
+};
+builtin_platform_driver(ab8500_gpadc_driver);