summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc/ad7192.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/iio/adc/ad7192.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/iio/adc/ad7192.c')
-rw-r--r--drivers/iio/adc/ad7192.c1119
1 files changed, 1119 insertions, 0 deletions
diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
new file mode 100644
index 000000000..faf680140
--- /dev/null
+++ b/drivers/iio/adc/ad7192.c
@@ -0,0 +1,1119 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AD7190 AD7192 AD7193 AD7195 SPI ADC driver
+ *
+ * Copyright 2011-2015 Analog Devices Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/adc/ad_sigma_delta.h>
+
+/* Registers */
+#define AD7192_REG_COMM 0 /* Communications Register (WO, 8-bit) */
+#define AD7192_REG_STAT 0 /* Status Register (RO, 8-bit) */
+#define AD7192_REG_MODE 1 /* Mode Register (RW, 24-bit */
+#define AD7192_REG_CONF 2 /* Configuration Register (RW, 24-bit) */
+#define AD7192_REG_DATA 3 /* Data Register (RO, 24/32-bit) */
+#define AD7192_REG_ID 4 /* ID Register (RO, 8-bit) */
+#define AD7192_REG_GPOCON 5 /* GPOCON Register (RO, 8-bit) */
+#define AD7192_REG_OFFSET 6 /* Offset Register (RW, 16-bit */
+ /* (AD7792)/24-bit (AD7192)) */
+#define AD7192_REG_FULLSALE 7 /* Full-Scale Register */
+ /* (RW, 16-bit (AD7792)/24-bit (AD7192)) */
+
+/* Communications Register Bit Designations (AD7192_REG_COMM) */
+#define AD7192_COMM_WEN BIT(7) /* Write Enable */
+#define AD7192_COMM_WRITE 0 /* Write Operation */
+#define AD7192_COMM_READ BIT(6) /* Read Operation */
+#define AD7192_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */
+#define AD7192_COMM_CREAD BIT(2) /* Continuous Read of Data Register */
+
+/* Status Register Bit Designations (AD7192_REG_STAT) */
+#define AD7192_STAT_RDY BIT(7) /* Ready */
+#define AD7192_STAT_ERR BIT(6) /* Error (Overrange, Underrange) */
+#define AD7192_STAT_NOREF BIT(5) /* Error no external reference */
+#define AD7192_STAT_PARITY BIT(4) /* Parity */
+#define AD7192_STAT_CH3 BIT(2) /* Channel 3 */
+#define AD7192_STAT_CH2 BIT(1) /* Channel 2 */
+#define AD7192_STAT_CH1 BIT(0) /* Channel 1 */
+
+/* Mode Register Bit Designations (AD7192_REG_MODE) */
+#define AD7192_MODE_SEL(x) (((x) & 0x7) << 21) /* Operation Mode Select */
+#define AD7192_MODE_SEL_MASK (0x7 << 21) /* Operation Mode Select Mask */
+#define AD7192_MODE_STA(x) (((x) & 0x1) << 20) /* Status Register transmission */
+#define AD7192_MODE_STA_MASK BIT(20) /* Status Register transmission Mask */
+#define AD7192_MODE_CLKSRC(x) (((x) & 0x3) << 18) /* Clock Source Select */
+#define AD7192_MODE_SINC3 BIT(15) /* SINC3 Filter Select */
+#define AD7192_MODE_ENPAR BIT(13) /* Parity Enable */
+#define AD7192_MODE_CLKDIV BIT(12) /* Clock divide by 2 (AD7190/2 only)*/
+#define AD7192_MODE_SCYCLE BIT(11) /* Single cycle conversion */
+#define AD7192_MODE_REJ60 BIT(10) /* 50/60Hz notch filter */
+#define AD7192_MODE_RATE(x) ((x) & 0x3FF) /* Filter Update Rate Select */
+
+/* Mode Register: AD7192_MODE_SEL options */
+#define AD7192_MODE_CONT 0 /* Continuous Conversion Mode */
+#define AD7192_MODE_SINGLE 1 /* Single Conversion Mode */
+#define AD7192_MODE_IDLE 2 /* Idle Mode */
+#define AD7192_MODE_PWRDN 3 /* Power-Down Mode */
+#define AD7192_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */
+#define AD7192_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */
+#define AD7192_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */
+#define AD7192_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */
+
+/* Mode Register: AD7192_MODE_CLKSRC options */
+#define AD7192_CLK_EXT_MCLK1_2 0 /* External 4.92 MHz Clock connected*/
+ /* from MCLK1 to MCLK2 */
+#define AD7192_CLK_EXT_MCLK2 1 /* External Clock applied to MCLK2 */
+#define AD7192_CLK_INT 2 /* Internal 4.92 MHz Clock not */
+ /* available at the MCLK2 pin */
+#define AD7192_CLK_INT_CO 3 /* Internal 4.92 MHz Clock available*/
+ /* at the MCLK2 pin */
+
+/* Configuration Register Bit Designations (AD7192_REG_CONF) */
+
+#define AD7192_CONF_CHOP BIT(23) /* CHOP enable */
+#define AD7192_CONF_ACX BIT(22) /* AC excitation enable(AD7195 only) */
+#define AD7192_CONF_REFSEL BIT(20) /* REFIN1/REFIN2 Reference Select */
+#define AD7192_CONF_CHAN(x) ((x) << 8) /* Channel select */
+#define AD7192_CONF_CHAN_MASK (0x7FF << 8) /* Channel select mask */
+#define AD7192_CONF_BURN BIT(7) /* Burnout current enable */
+#define AD7192_CONF_REFDET BIT(6) /* Reference detect enable */
+#define AD7192_CONF_BUF BIT(4) /* Buffered Mode Enable */
+#define AD7192_CONF_UNIPOLAR BIT(3) /* Unipolar/Bipolar Enable */
+#define AD7192_CONF_GAIN(x) ((x) & 0x7) /* Gain Select */
+
+#define AD7192_CH_AIN1P_AIN2M BIT(0) /* AIN1(+) - AIN2(-) */
+#define AD7192_CH_AIN3P_AIN4M BIT(1) /* AIN3(+) - AIN4(-) */
+#define AD7192_CH_TEMP BIT(2) /* Temp Sensor */
+#define AD7192_CH_AIN2P_AIN2M BIT(3) /* AIN2(+) - AIN2(-) */
+#define AD7192_CH_AIN1 BIT(4) /* AIN1 - AINCOM */
+#define AD7192_CH_AIN2 BIT(5) /* AIN2 - AINCOM */
+#define AD7192_CH_AIN3 BIT(6) /* AIN3 - AINCOM */
+#define AD7192_CH_AIN4 BIT(7) /* AIN4 - AINCOM */
+
+#define AD7193_CH_AIN1P_AIN2M 0x001 /* AIN1(+) - AIN2(-) */
+#define AD7193_CH_AIN3P_AIN4M 0x002 /* AIN3(+) - AIN4(-) */
+#define AD7193_CH_AIN5P_AIN6M 0x004 /* AIN5(+) - AIN6(-) */
+#define AD7193_CH_AIN7P_AIN8M 0x008 /* AIN7(+) - AIN8(-) */
+#define AD7193_CH_TEMP 0x100 /* Temp senseor */
+#define AD7193_CH_AIN2P_AIN2M 0x200 /* AIN2(+) - AIN2(-) */
+#define AD7193_CH_AIN1 0x401 /* AIN1 - AINCOM */
+#define AD7193_CH_AIN2 0x402 /* AIN2 - AINCOM */
+#define AD7193_CH_AIN3 0x404 /* AIN3 - AINCOM */
+#define AD7193_CH_AIN4 0x408 /* AIN4 - AINCOM */
+#define AD7193_CH_AIN5 0x410 /* AIN5 - AINCOM */
+#define AD7193_CH_AIN6 0x420 /* AIN6 - AINCOM */
+#define AD7193_CH_AIN7 0x440 /* AIN7 - AINCOM */
+#define AD7193_CH_AIN8 0x480 /* AIN7 - AINCOM */
+#define AD7193_CH_AINCOM 0x600 /* AINCOM - AINCOM */
+
+/* ID Register Bit Designations (AD7192_REG_ID) */
+#define CHIPID_AD7190 0x4
+#define CHIPID_AD7192 0x0
+#define CHIPID_AD7193 0x2
+#define CHIPID_AD7195 0x6
+#define AD7192_ID_MASK 0x0F
+
+/* GPOCON Register Bit Designations (AD7192_REG_GPOCON) */
+#define AD7192_GPOCON_BPDSW BIT(6) /* Bridge power-down switch enable */
+#define AD7192_GPOCON_GP32EN BIT(5) /* Digital Output P3 and P2 enable */
+#define AD7192_GPOCON_GP10EN BIT(4) /* Digital Output P1 and P0 enable */
+#define AD7192_GPOCON_P3DAT BIT(3) /* P3 state */
+#define AD7192_GPOCON_P2DAT BIT(2) /* P2 state */
+#define AD7192_GPOCON_P1DAT BIT(1) /* P1 state */
+#define AD7192_GPOCON_P0DAT BIT(0) /* P0 state */
+
+#define AD7192_EXT_FREQ_MHZ_MIN 2457600
+#define AD7192_EXT_FREQ_MHZ_MAX 5120000
+#define AD7192_INT_FREQ_MHZ 4915200
+
+#define AD7192_NO_SYNC_FILTER 1
+#define AD7192_SYNC3_FILTER 3
+#define AD7192_SYNC4_FILTER 4
+
+/* NOTE:
+ * The AD7190/2/5 features a dual use data out ready DOUT/RDY output.
+ * In order to avoid contentions on the SPI bus, it's therefore necessary
+ * to use spi bus locking.
+ *
+ * The DOUT/RDY output must also be wired to an interrupt capable GPIO.
+ */
+
+enum {
+ AD7192_SYSCALIB_ZERO_SCALE,
+ AD7192_SYSCALIB_FULL_SCALE,
+};
+
+enum {
+ ID_AD7190,
+ ID_AD7192,
+ ID_AD7193,
+ ID_AD7195,
+};
+
+struct ad7192_chip_info {
+ unsigned int chip_id;
+ const char *name;
+};
+
+struct ad7192_state {
+ const struct ad7192_chip_info *chip_info;
+ struct regulator *avdd;
+ struct regulator *vref;
+ struct clk *mclk;
+ u16 int_vref_mv;
+ u32 fclk;
+ u32 f_order;
+ u32 mode;
+ u32 conf;
+ u32 scale_avail[8][2];
+ u8 gpocon;
+ u8 clock_sel;
+ struct mutex lock; /* protect sensor state */
+ u8 syscalib_mode[8];
+
+ struct ad_sigma_delta sd;
+};
+
+static const char * const ad7192_syscalib_modes[] = {
+ [AD7192_SYSCALIB_ZERO_SCALE] = "zero_scale",
+ [AD7192_SYSCALIB_FULL_SCALE] = "full_scale",
+};
+
+static int ad7192_set_syscalib_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ unsigned int mode)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ st->syscalib_mode[chan->channel] = mode;
+
+ return 0;
+}
+
+static int ad7192_get_syscalib_mode(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ return st->syscalib_mode[chan->channel];
+}
+
+static ssize_t ad7192_write_syscalib(struct iio_dev *indio_dev,
+ uintptr_t private,
+ const struct iio_chan_spec *chan,
+ const char *buf, size_t len)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+ bool sys_calib;
+ int ret, temp;
+
+ ret = kstrtobool(buf, &sys_calib);
+ if (ret)
+ return ret;
+
+ temp = st->syscalib_mode[chan->channel];
+ if (sys_calib) {
+ if (temp == AD7192_SYSCALIB_ZERO_SCALE)
+ ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_ZERO,
+ chan->address);
+ else
+ ret = ad_sd_calibrate(&st->sd, AD7192_MODE_CAL_SYS_FULL,
+ chan->address);
+ }
+
+ return ret ? ret : len;
+}
+
+static const struct iio_enum ad7192_syscalib_mode_enum = {
+ .items = ad7192_syscalib_modes,
+ .num_items = ARRAY_SIZE(ad7192_syscalib_modes),
+ .set = ad7192_set_syscalib_mode,
+ .get = ad7192_get_syscalib_mode
+};
+
+static const struct iio_chan_spec_ext_info ad7192_calibsys_ext_info[] = {
+ {
+ .name = "sys_calibration",
+ .write = ad7192_write_syscalib,
+ .shared = IIO_SEPARATE,
+ },
+ IIO_ENUM("sys_calibration_mode", IIO_SEPARATE,
+ &ad7192_syscalib_mode_enum),
+ IIO_ENUM_AVAILABLE("sys_calibration_mode", IIO_SHARED_BY_TYPE,
+ &ad7192_syscalib_mode_enum),
+ {}
+};
+
+static struct ad7192_state *ad_sigma_delta_to_ad7192(struct ad_sigma_delta *sd)
+{
+ return container_of(sd, struct ad7192_state, sd);
+}
+
+static int ad7192_set_channel(struct ad_sigma_delta *sd, unsigned int channel)
+{
+ struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+
+ st->conf &= ~AD7192_CONF_CHAN_MASK;
+ st->conf |= AD7192_CONF_CHAN(channel);
+
+ return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+}
+
+static int ad7192_set_mode(struct ad_sigma_delta *sd,
+ enum ad_sigma_delta_mode mode)
+{
+ struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+
+ st->mode &= ~AD7192_MODE_SEL_MASK;
+ st->mode |= AD7192_MODE_SEL(mode);
+
+ return ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+}
+
+static int ad7192_append_status(struct ad_sigma_delta *sd, bool append)
+{
+ struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+ unsigned int mode = st->mode;
+ int ret;
+
+ mode &= ~AD7192_MODE_STA_MASK;
+ mode |= AD7192_MODE_STA(append);
+
+ ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, mode);
+ if (ret < 0)
+ return ret;
+
+ st->mode = mode;
+
+ return 0;
+}
+
+static int ad7192_disable_all(struct ad_sigma_delta *sd)
+{
+ struct ad7192_state *st = ad_sigma_delta_to_ad7192(sd);
+ u32 conf = st->conf;
+ int ret;
+
+ conf &= ~AD7192_CONF_CHAN_MASK;
+
+ ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf);
+ if (ret < 0)
+ return ret;
+
+ st->conf = conf;
+
+ return 0;
+}
+
+static const struct ad_sigma_delta_info ad7192_sigma_delta_info = {
+ .set_channel = ad7192_set_channel,
+ .append_status = ad7192_append_status,
+ .disable_all = ad7192_disable_all,
+ .set_mode = ad7192_set_mode,
+ .has_registers = true,
+ .addr_shift = 3,
+ .read_mask = BIT(6),
+ .status_ch_mask = GENMASK(3, 0),
+ .num_slots = 4,
+ .irq_flags = IRQF_TRIGGER_FALLING,
+};
+
+static const struct ad_sd_calib_data ad7192_calib_arr[8] = {
+ {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN1},
+ {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN1},
+ {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN2},
+ {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN2},
+ {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN3},
+ {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN3},
+ {AD7192_MODE_CAL_INT_ZERO, AD7192_CH_AIN4},
+ {AD7192_MODE_CAL_INT_FULL, AD7192_CH_AIN4}
+};
+
+static int ad7192_calibrate_all(struct ad7192_state *st)
+{
+ return ad_sd_calibrate_all(&st->sd, ad7192_calib_arr,
+ ARRAY_SIZE(ad7192_calib_arr));
+}
+
+static inline bool ad7192_valid_external_frequency(u32 freq)
+{
+ return (freq >= AD7192_EXT_FREQ_MHZ_MIN &&
+ freq <= AD7192_EXT_FREQ_MHZ_MAX);
+}
+
+static int ad7192_of_clock_select(struct ad7192_state *st)
+{
+ struct device_node *np = st->sd.spi->dev.of_node;
+ unsigned int clock_sel;
+
+ clock_sel = AD7192_CLK_INT;
+
+ /* use internal clock */
+ if (!st->mclk) {
+ if (of_property_read_bool(np, "adi,int-clock-output-enable"))
+ clock_sel = AD7192_CLK_INT_CO;
+ } else {
+ if (of_property_read_bool(np, "adi,clock-xtal"))
+ clock_sel = AD7192_CLK_EXT_MCLK1_2;
+ else
+ clock_sel = AD7192_CLK_EXT_MCLK2;
+ }
+
+ return clock_sel;
+}
+
+static int ad7192_setup(struct iio_dev *indio_dev, struct device_node *np)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+ bool rej60_en, refin2_en;
+ bool buf_en, bipolar, burnout_curr_en;
+ unsigned long long scale_uv;
+ int i, ret, id;
+
+ /* reset the serial interface */
+ ret = ad_sd_reset(&st->sd, 48);
+ if (ret < 0)
+ return ret;
+ usleep_range(500, 1000); /* Wait for at least 500us */
+
+ /* write/read test for device presence */
+ ret = ad_sd_read_reg(&st->sd, AD7192_REG_ID, 1, &id);
+ if (ret)
+ return ret;
+
+ id &= AD7192_ID_MASK;
+
+ if (id != st->chip_info->chip_id)
+ dev_warn(&st->sd.spi->dev, "device ID query failed (0x%X)\n",
+ id);
+
+ st->mode = AD7192_MODE_SEL(AD7192_MODE_IDLE) |
+ AD7192_MODE_CLKSRC(st->clock_sel) |
+ AD7192_MODE_RATE(480);
+
+ st->conf = AD7192_CONF_GAIN(0);
+
+ rej60_en = of_property_read_bool(np, "adi,rejection-60-Hz-enable");
+ if (rej60_en)
+ st->mode |= AD7192_MODE_REJ60;
+
+ refin2_en = of_property_read_bool(np, "adi,refin2-pins-enable");
+ if (refin2_en && st->chip_info->chip_id != CHIPID_AD7195)
+ st->conf |= AD7192_CONF_REFSEL;
+
+ st->conf &= ~AD7192_CONF_CHOP;
+ st->f_order = AD7192_NO_SYNC_FILTER;
+
+ buf_en = of_property_read_bool(np, "adi,buffer-enable");
+ if (buf_en)
+ st->conf |= AD7192_CONF_BUF;
+
+ bipolar = of_property_read_bool(np, "bipolar");
+ if (!bipolar)
+ st->conf |= AD7192_CONF_UNIPOLAR;
+
+ burnout_curr_en = of_property_read_bool(np,
+ "adi,burnout-currents-enable");
+ if (burnout_curr_en && buf_en) {
+ st->conf |= AD7192_CONF_BURN;
+ } else if (burnout_curr_en) {
+ dev_warn(&st->sd.spi->dev,
+ "Can't enable burnout currents: see CHOP or buffer\n");
+ }
+
+ ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+ if (ret)
+ return ret;
+
+ ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+ if (ret)
+ return ret;
+
+ ret = ad7192_calibrate_all(st);
+ if (ret)
+ return ret;
+
+ /* Populate available ADC input ranges */
+ for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) {
+ scale_uv = ((u64)st->int_vref_mv * 100000000)
+ >> (indio_dev->channels[0].scan_type.realbits -
+ ((st->conf & AD7192_CONF_UNIPOLAR) ? 0 : 1));
+ scale_uv >>= i;
+
+ st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10;
+ st->scale_avail[i][0] = scale_uv;
+ }
+
+ return 0;
+}
+
+static ssize_t ad7192_show_ac_excitation(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ return sysfs_emit(buf, "%d\n", !!(st->conf & AD7192_CONF_ACX));
+}
+
+static ssize_t ad7192_show_bridge_switch(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ return sysfs_emit(buf, "%d\n", !!(st->gpocon & AD7192_GPOCON_BPDSW));
+}
+
+static ssize_t ad7192_set(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7192_state *st = iio_priv(indio_dev);
+ struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+ int ret;
+ bool val;
+
+ ret = kstrtobool(buf, &val);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ switch ((u32)this_attr->address) {
+ case AD7192_REG_GPOCON:
+ if (val)
+ st->gpocon |= AD7192_GPOCON_BPDSW;
+ else
+ st->gpocon &= ~AD7192_GPOCON_BPDSW;
+
+ ad_sd_write_reg(&st->sd, AD7192_REG_GPOCON, 1, st->gpocon);
+ break;
+ case AD7192_REG_CONF:
+ if (val)
+ st->conf |= AD7192_CONF_ACX;
+ else
+ st->conf &= ~AD7192_CONF_ACX;
+
+ ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret ? ret : len;
+}
+
+static void ad7192_get_available_filter_freq(struct ad7192_state *st,
+ int *freq)
+{
+ unsigned int fadc;
+
+ /* Formulas for filter at page 25 of the datasheet */
+ fadc = DIV_ROUND_CLOSEST(st->fclk,
+ AD7192_SYNC4_FILTER * AD7192_MODE_RATE(st->mode));
+ freq[0] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
+
+ fadc = DIV_ROUND_CLOSEST(st->fclk,
+ AD7192_SYNC3_FILTER * AD7192_MODE_RATE(st->mode));
+ freq[1] = DIV_ROUND_CLOSEST(fadc * 240, 1024);
+
+ fadc = DIV_ROUND_CLOSEST(st->fclk, AD7192_MODE_RATE(st->mode));
+ freq[2] = DIV_ROUND_CLOSEST(fadc * 230, 1024);
+ freq[3] = DIV_ROUND_CLOSEST(fadc * 272, 1024);
+}
+
+static ssize_t ad7192_show_filter_avail(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad7192_state *st = iio_priv(indio_dev);
+ unsigned int freq_avail[4], i;
+ size_t len = 0;
+
+ ad7192_get_available_filter_freq(st, freq_avail);
+
+ for (i = 0; i < ARRAY_SIZE(freq_avail); i++)
+ len += scnprintf(buf + len, PAGE_SIZE - len,
+ "%d.%d ", freq_avail[i] / 1000,
+ freq_avail[i] % 1000);
+
+ buf[len - 1] = '\n';
+
+ return len;
+}
+
+static IIO_DEVICE_ATTR(filter_low_pass_3db_frequency_available,
+ 0444, ad7192_show_filter_avail, NULL, 0);
+
+static IIO_DEVICE_ATTR(bridge_switch_en, 0644,
+ ad7192_show_bridge_switch, ad7192_set,
+ AD7192_REG_GPOCON);
+
+static IIO_DEVICE_ATTR(ac_excitation_en, 0644,
+ ad7192_show_ac_excitation, ad7192_set,
+ AD7192_REG_CONF);
+
+static struct attribute *ad7192_attributes[] = {
+ &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
+ &iio_dev_attr_bridge_switch_en.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group ad7192_attribute_group = {
+ .attrs = ad7192_attributes,
+};
+
+static struct attribute *ad7195_attributes[] = {
+ &iio_dev_attr_filter_low_pass_3db_frequency_available.dev_attr.attr,
+ &iio_dev_attr_bridge_switch_en.dev_attr.attr,
+ &iio_dev_attr_ac_excitation_en.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group ad7195_attribute_group = {
+ .attrs = ad7195_attributes,
+};
+
+static unsigned int ad7192_get_temp_scale(bool unipolar)
+{
+ return unipolar ? 2815 * 2 : 2815;
+}
+
+static int ad7192_set_3db_filter_freq(struct ad7192_state *st,
+ int val, int val2)
+{
+ int freq_avail[4], i, ret, freq;
+ unsigned int diff_new, diff_old;
+ int idx = 0;
+
+ diff_old = U32_MAX;
+ freq = val * 1000 + val2;
+
+ ad7192_get_available_filter_freq(st, freq_avail);
+
+ for (i = 0; i < ARRAY_SIZE(freq_avail); i++) {
+ diff_new = abs(freq - freq_avail[i]);
+ if (diff_new < diff_old) {
+ diff_old = diff_new;
+ idx = i;
+ }
+ }
+
+ switch (idx) {
+ case 0:
+ st->f_order = AD7192_SYNC4_FILTER;
+ st->mode &= ~AD7192_MODE_SINC3;
+
+ st->conf |= AD7192_CONF_CHOP;
+ break;
+ case 1:
+ st->f_order = AD7192_SYNC3_FILTER;
+ st->mode |= AD7192_MODE_SINC3;
+
+ st->conf |= AD7192_CONF_CHOP;
+ break;
+ case 2:
+ st->f_order = AD7192_NO_SYNC_FILTER;
+ st->mode &= ~AD7192_MODE_SINC3;
+
+ st->conf &= ~AD7192_CONF_CHOP;
+ break;
+ case 3:
+ st->f_order = AD7192_NO_SYNC_FILTER;
+ st->mode |= AD7192_MODE_SINC3;
+
+ st->conf &= ~AD7192_CONF_CHOP;
+ break;
+ }
+
+ ret = ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+ if (ret < 0)
+ return ret;
+
+ return ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, st->conf);
+}
+
+static int ad7192_get_3db_filter_freq(struct ad7192_state *st)
+{
+ unsigned int fadc;
+
+ fadc = DIV_ROUND_CLOSEST(st->fclk,
+ st->f_order * AD7192_MODE_RATE(st->mode));
+
+ if (st->conf & AD7192_CONF_CHOP)
+ return DIV_ROUND_CLOSEST(fadc * 240, 1024);
+ if (st->mode & AD7192_MODE_SINC3)
+ return DIV_ROUND_CLOSEST(fadc * 272, 1024);
+ else
+ return DIV_ROUND_CLOSEST(fadc * 230, 1024);
+}
+
+static int ad7192_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+ bool unipolar = !!(st->conf & AD7192_CONF_UNIPOLAR);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ return ad_sigma_delta_single_conversion(indio_dev, chan, val);
+ case IIO_CHAN_INFO_SCALE:
+ switch (chan->type) {
+ case IIO_VOLTAGE:
+ mutex_lock(&st->lock);
+ *val = st->scale_avail[AD7192_CONF_GAIN(st->conf)][0];
+ *val2 = st->scale_avail[AD7192_CONF_GAIN(st->conf)][1];
+ mutex_unlock(&st->lock);
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_TEMP:
+ *val = 0;
+ *val2 = 1000000000 / ad7192_get_temp_scale(unipolar);
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return -EINVAL;
+ }
+ case IIO_CHAN_INFO_OFFSET:
+ if (!unipolar)
+ *val = -(1 << (chan->scan_type.realbits - 1));
+ else
+ *val = 0;
+ /* Kelvin to Celsius */
+ if (chan->type == IIO_TEMP)
+ *val -= 273 * ad7192_get_temp_scale(unipolar);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = st->fclk /
+ (st->f_order * 1024 * AD7192_MODE_RATE(st->mode));
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ *val = ad7192_get_3db_filter_freq(st);
+ *val2 = 1000;
+ return IIO_VAL_FRACTIONAL;
+ }
+
+ return -EINVAL;
+}
+
+static int ad7192_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+ int ret, i, div;
+ unsigned int tmp;
+
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ return ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ ret = -EINVAL;
+ mutex_lock(&st->lock);
+ for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++)
+ if (val2 == st->scale_avail[i][1]) {
+ ret = 0;
+ tmp = st->conf;
+ st->conf &= ~AD7192_CONF_GAIN(-1);
+ st->conf |= AD7192_CONF_GAIN(i);
+ if (tmp == st->conf)
+ break;
+ ad_sd_write_reg(&st->sd, AD7192_REG_CONF,
+ 3, st->conf);
+ ad7192_calibrate_all(st);
+ break;
+ }
+ mutex_unlock(&st->lock);
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ if (!val) {
+ ret = -EINVAL;
+ break;
+ }
+
+ div = st->fclk / (val * st->f_order * 1024);
+ if (div < 1 || div > 1023) {
+ ret = -EINVAL;
+ break;
+ }
+
+ st->mode &= ~AD7192_MODE_RATE(-1);
+ st->mode |= AD7192_MODE_RATE(div);
+ ad_sd_write_reg(&st->sd, AD7192_REG_MODE, 3, st->mode);
+ break;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ ret = ad7192_set_3db_filter_freq(st, val, val2 / 1000);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ iio_device_release_direct_mode(indio_dev);
+
+ return ret;
+}
+
+static int ad7192_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ad7192_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *vals = (int *)st->scale_avail;
+ *type = IIO_VAL_INT_PLUS_NANO;
+ /* Values are stored in a 2D matrix */
+ *length = ARRAY_SIZE(st->scale_avail) * 2;
+
+ return IIO_AVAIL_LIST;
+ }
+
+ return -EINVAL;
+}
+
+static int ad7192_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+ u32 conf = st->conf;
+ int ret;
+ int i;
+
+ conf &= ~AD7192_CONF_CHAN_MASK;
+ for_each_set_bit(i, scan_mask, 8)
+ conf |= AD7192_CONF_CHAN(i);
+
+ ret = ad_sd_write_reg(&st->sd, AD7192_REG_CONF, 3, conf);
+ if (ret < 0)
+ return ret;
+
+ st->conf = conf;
+
+ return 0;
+}
+
+static const struct iio_info ad7192_info = {
+ .read_raw = ad7192_read_raw,
+ .write_raw = ad7192_write_raw,
+ .write_raw_get_fmt = ad7192_write_raw_get_fmt,
+ .read_avail = ad7192_read_avail,
+ .attrs = &ad7192_attribute_group,
+ .validate_trigger = ad_sd_validate_trigger,
+ .update_scan_mode = ad7192_update_scan_mode,
+};
+
+static const struct iio_info ad7195_info = {
+ .read_raw = ad7192_read_raw,
+ .write_raw = ad7192_write_raw,
+ .write_raw_get_fmt = ad7192_write_raw_get_fmt,
+ .read_avail = ad7192_read_avail,
+ .attrs = &ad7195_attribute_group,
+ .validate_trigger = ad_sd_validate_trigger,
+ .update_scan_mode = ad7192_update_scan_mode,
+};
+
+#define __AD719x_CHANNEL(_si, _channel1, _channel2, _address, _extend_name, \
+ _type, _mask_type_av, _ext_info) \
+ { \
+ .type = (_type), \
+ .differential = ((_channel2) == -1 ? 0 : 1), \
+ .indexed = 1, \
+ .channel = (_channel1), \
+ .channel2 = (_channel2), \
+ .address = (_address), \
+ .extend_name = (_extend_name), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+ .info_mask_shared_by_type_available = (_mask_type_av), \
+ .ext_info = (_ext_info), \
+ .scan_index = (_si), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 24, \
+ .storagebits = 32, \
+ .endianness = IIO_BE, \
+ }, \
+ }
+
+#define AD719x_DIFF_CHANNEL(_si, _channel1, _channel2, _address) \
+ __AD719x_CHANNEL(_si, _channel1, _channel2, _address, NULL, \
+ IIO_VOLTAGE, BIT(IIO_CHAN_INFO_SCALE), \
+ ad7192_calibsys_ext_info)
+
+#define AD719x_CHANNEL(_si, _channel1, _address) \
+ __AD719x_CHANNEL(_si, _channel1, -1, _address, NULL, IIO_VOLTAGE, \
+ BIT(IIO_CHAN_INFO_SCALE), ad7192_calibsys_ext_info)
+
+#define AD719x_TEMP_CHANNEL(_si, _address) \
+ __AD719x_CHANNEL(_si, 0, -1, _address, NULL, IIO_TEMP, 0, NULL)
+
+static const struct iio_chan_spec ad7192_channels[] = {
+ AD719x_DIFF_CHANNEL(0, 1, 2, AD7192_CH_AIN1P_AIN2M),
+ AD719x_DIFF_CHANNEL(1, 3, 4, AD7192_CH_AIN3P_AIN4M),
+ AD719x_TEMP_CHANNEL(2, AD7192_CH_TEMP),
+ AD719x_DIFF_CHANNEL(3, 2, 2, AD7192_CH_AIN2P_AIN2M),
+ AD719x_CHANNEL(4, 1, AD7192_CH_AIN1),
+ AD719x_CHANNEL(5, 2, AD7192_CH_AIN2),
+ AD719x_CHANNEL(6, 3, AD7192_CH_AIN3),
+ AD719x_CHANNEL(7, 4, AD7192_CH_AIN4),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+};
+
+static const struct iio_chan_spec ad7193_channels[] = {
+ AD719x_DIFF_CHANNEL(0, 1, 2, AD7193_CH_AIN1P_AIN2M),
+ AD719x_DIFF_CHANNEL(1, 3, 4, AD7193_CH_AIN3P_AIN4M),
+ AD719x_DIFF_CHANNEL(2, 5, 6, AD7193_CH_AIN5P_AIN6M),
+ AD719x_DIFF_CHANNEL(3, 7, 8, AD7193_CH_AIN7P_AIN8M),
+ AD719x_TEMP_CHANNEL(4, AD7193_CH_TEMP),
+ AD719x_DIFF_CHANNEL(5, 2, 2, AD7193_CH_AIN2P_AIN2M),
+ AD719x_CHANNEL(6, 1, AD7193_CH_AIN1),
+ AD719x_CHANNEL(7, 2, AD7193_CH_AIN2),
+ AD719x_CHANNEL(8, 3, AD7193_CH_AIN3),
+ AD719x_CHANNEL(9, 4, AD7193_CH_AIN4),
+ AD719x_CHANNEL(10, 5, AD7193_CH_AIN5),
+ AD719x_CHANNEL(11, 6, AD7193_CH_AIN6),
+ AD719x_CHANNEL(12, 7, AD7193_CH_AIN7),
+ AD719x_CHANNEL(13, 8, AD7193_CH_AIN8),
+ IIO_CHAN_SOFT_TIMESTAMP(14),
+};
+
+static const struct ad7192_chip_info ad7192_chip_info_tbl[] = {
+ [ID_AD7190] = {
+ .chip_id = CHIPID_AD7190,
+ .name = "ad7190",
+ },
+ [ID_AD7192] = {
+ .chip_id = CHIPID_AD7192,
+ .name = "ad7192",
+ },
+ [ID_AD7193] = {
+ .chip_id = CHIPID_AD7193,
+ .name = "ad7193",
+ },
+ [ID_AD7195] = {
+ .chip_id = CHIPID_AD7195,
+ .name = "ad7195",
+ },
+};
+
+static int ad7192_channels_config(struct iio_dev *indio_dev)
+{
+ struct ad7192_state *st = iio_priv(indio_dev);
+
+ switch (st->chip_info->chip_id) {
+ case CHIPID_AD7193:
+ indio_dev->channels = ad7193_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad7193_channels);
+ break;
+ default:
+ indio_dev->channels = ad7192_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ad7192_channels);
+ break;
+ }
+
+ return 0;
+}
+
+static void ad7192_reg_disable(void *reg)
+{
+ regulator_disable(reg);
+}
+
+static void ad7192_clk_disable(void *clk)
+{
+ clk_disable_unprepare(clk);
+}
+
+static int ad7192_probe(struct spi_device *spi)
+{
+ struct ad7192_state *st;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ if (!spi->irq) {
+ dev_err(&spi->dev, "no IRQ?\n");
+ return -ENODEV;
+ }
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+
+ mutex_init(&st->lock);
+
+ st->avdd = devm_regulator_get(&spi->dev, "avdd");
+ if (IS_ERR(st->avdd))
+ return PTR_ERR(st->avdd);
+
+ ret = regulator_enable(st->avdd);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to enable specified AVdd supply\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->avdd);
+ if (ret)
+ return ret;
+
+ ret = devm_regulator_get_enable(&spi->dev, "dvdd");
+ if (ret)
+ return dev_err_probe(&spi->dev, ret, "Failed to enable specified DVdd supply\n");
+
+ st->vref = devm_regulator_get_optional(&spi->dev, "vref");
+ if (IS_ERR(st->vref)) {
+ if (PTR_ERR(st->vref) != -ENODEV)
+ return PTR_ERR(st->vref);
+
+ ret = regulator_get_voltage(st->avdd);
+ if (ret < 0)
+ return dev_err_probe(&spi->dev, ret,
+ "Device tree error, AVdd voltage undefined\n");
+ } else {
+ ret = regulator_enable(st->vref);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to enable specified Vref supply\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7192_reg_disable, st->vref);
+ if (ret)
+ return ret;
+
+ ret = regulator_get_voltage(st->vref);
+ if (ret < 0)
+ return dev_err_probe(&spi->dev, ret,
+ "Device tree error, Vref voltage undefined\n");
+ }
+ st->int_vref_mv = ret / 1000;
+
+ st->chip_info = of_device_get_match_data(&spi->dev);
+ indio_dev->name = st->chip_info->name;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = ad7192_channels_config(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ if (st->chip_info->chip_id == CHIPID_AD7195)
+ indio_dev->info = &ad7195_info;
+ else
+ indio_dev->info = &ad7192_info;
+
+ ad_sd_init(&st->sd, indio_dev, spi, &ad7192_sigma_delta_info);
+
+ ret = devm_ad_sd_setup_buffer_and_trigger(&spi->dev, indio_dev);
+ if (ret)
+ return ret;
+
+ st->fclk = AD7192_INT_FREQ_MHZ;
+
+ st->mclk = devm_clk_get_optional(&spi->dev, "mclk");
+ if (IS_ERR(st->mclk))
+ return PTR_ERR(st->mclk);
+
+ st->clock_sel = ad7192_of_clock_select(st);
+
+ if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+ st->clock_sel == AD7192_CLK_EXT_MCLK2) {
+ ret = clk_prepare_enable(st->mclk);
+ if (ret < 0)
+ return ret;
+
+ ret = devm_add_action_or_reset(&spi->dev, ad7192_clk_disable,
+ st->mclk);
+ if (ret)
+ return ret;
+
+ st->fclk = clk_get_rate(st->mclk);
+ if (!ad7192_valid_external_frequency(st->fclk)) {
+ dev_err(&spi->dev,
+ "External clock frequency out of bounds\n");
+ return -EINVAL;
+ }
+ }
+
+ ret = ad7192_setup(indio_dev, spi->dev.of_node);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct of_device_id ad7192_of_match[] = {
+ { .compatible = "adi,ad7190", .data = &ad7192_chip_info_tbl[ID_AD7190] },
+ { .compatible = "adi,ad7192", .data = &ad7192_chip_info_tbl[ID_AD7192] },
+ { .compatible = "adi,ad7193", .data = &ad7192_chip_info_tbl[ID_AD7193] },
+ { .compatible = "adi,ad7195", .data = &ad7192_chip_info_tbl[ID_AD7195] },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ad7192_of_match);
+
+static struct spi_driver ad7192_driver = {
+ .driver = {
+ .name = "ad7192",
+ .of_match_table = ad7192_of_match,
+ },
+ .probe = ad7192_probe,
+};
+module_spi_driver(ad7192_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Analog Devices AD7190, AD7192, AD7193, AD7195 ADC");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_AD_SIGMA_DELTA);