Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3536 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
new file mode 100644
index 000000000..aea571943
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -0,0 +1,3536 @@
+/*
+ * Copyright (c) 2013 - 2017 Intel Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
+ * All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+/*
+ * This file contains all of the code that is specific to the
+ * QLogic_IB 6120 PCIe chip.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <rdma/ib_verbs.h>
+
+#include "qib.h"
+#include "qib_6120_regs.h"
+
+static void qib_6120_setup_setextled(struct qib_pportdata *, u32);
+static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op);
+static u8 qib_6120_phys_portstate(u64);
+static u32 qib_6120_iblink_state(u64);
+
+/*
+ * This file contains all the chip-specific register information and
+ * access functions for the Intel Intel_IB PCI-Express chip.
+ *
+ */
+
+/* KREG_IDX uses machine-generated #defines */
+#define KREG_IDX(regname) (QIB_6120_##regname##_OFFS / sizeof(u64))
+
+/* Use defines to tie machine-generated names to lower-case names */
+#define kr_extctrl KREG_IDX(EXTCtrl)
+#define kr_extstatus KREG_IDX(EXTStatus)
+#define kr_gpio_clear KREG_IDX(GPIOClear)
+#define kr_gpio_mask KREG_IDX(GPIOMask)
+#define kr_gpio_out KREG_IDX(GPIOOut)
+#define kr_gpio_status KREG_IDX(GPIOStatus)
+#define kr_rcvctrl KREG_IDX(RcvCtrl)
+#define kr_sendctrl KREG_IDX(SendCtrl)
+#define kr_partitionkey KREG_IDX(RcvPartitionKey)
+#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl)
+#define kr_ibcstatus KREG_IDX(IBCStatus)
+#define kr_ibcctrl KREG_IDX(IBCCtrl)
+#define kr_sendbuffererror KREG_IDX(SendBufErr0)
+#define kr_rcvbthqp KREG_IDX(RcvBTHQP)
+#define kr_counterregbase KREG_IDX(CntrRegBase)
+#define kr_palign KREG_IDX(PageAlign)
+#define kr_rcvegrbase KREG_IDX(RcvEgrBase)
+#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt)
+#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt)
+#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize)
+#define kr_rcvhdrsize KREG_IDX(RcvHdrSize)
+#define kr_rcvtidbase KREG_IDX(RcvTIDBase)
+#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt)
+#define kr_scratch KREG_IDX(Scratch)
+#define kr_sendctrl KREG_IDX(SendCtrl)
+#define kr_sendpioavailaddr KREG_IDX(SendPIOAvailAddr)
+#define kr_sendpiobufbase KREG_IDX(SendPIOBufBase)
+#define kr_sendpiobufcnt KREG_IDX(SendPIOBufCnt)
+#define kr_sendpiosize KREG_IDX(SendPIOSize)
+#define kr_sendregbase KREG_IDX(SendRegBase)
+#define kr_userregbase KREG_IDX(UserRegBase)
+#define kr_control KREG_IDX(Control)
+#define kr_intclear KREG_IDX(IntClear)
+#define kr_intmask KREG_IDX(IntMask)
+#define kr_intstatus KREG_IDX(IntStatus)
+#define kr_errclear KREG_IDX(ErrClear)
+#define kr_errmask KREG_IDX(ErrMask)
+#define kr_errstatus KREG_IDX(ErrStatus)
+#define kr_hwerrclear KREG_IDX(HwErrClear)
+#define kr_hwerrmask KREG_IDX(HwErrMask)
+#define kr_hwerrstatus KREG_IDX(HwErrStatus)
+#define kr_revision KREG_IDX(Revision)
+#define kr_portcnt KREG_IDX(PortCnt)
+#define kr_serdes_cfg0 KREG_IDX(SerdesCfg0)
+#define kr_serdes_cfg1 (kr_serdes_cfg0 + 1)
+#define kr_serdes_stat KREG_IDX(SerdesStat)
+#define kr_xgxs_cfg KREG_IDX(XGXSCfg)
+
+/* These must only be written via qib_write_kreg_ctxt() */
+#define kr_rcvhdraddr KREG_IDX(RcvHdrAddr0)
+#define kr_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0)
+
+#define CREG_IDX(regname) ((QIB_6120_##regname##_OFFS - \
+			QIB_6120_LBIntCnt_OFFS) / sizeof(u64))
+
+#define cr_badformat CREG_IDX(RxBadFormatCnt)
+#define cr_erricrc CREG_IDX(RxICRCErrCnt)
+#define cr_errlink CREG_IDX(RxLinkProblemCnt)
+#define cr_errlpcrc CREG_IDX(RxLPCRCErrCnt)
+#define cr_errpkey CREG_IDX(RxPKeyMismatchCnt)
+#define cr_rcvflowctrl_err CREG_IDX(RxFlowCtrlErrCnt)
+#define cr_err_rlen CREG_IDX(RxLenErrCnt)
+#define cr_errslen CREG_IDX(TxLenErrCnt)
+#define cr_errtidfull CREG_IDX(RxTIDFullErrCnt)
+#define cr_errtidvalid CREG_IDX(RxTIDValidErrCnt)
+#define cr_errvcrc CREG_IDX(RxVCRCErrCnt)
+#define cr_ibstatuschange CREG_IDX(IBStatusChangeCnt)
+#define cr_lbint CREG_IDX(LBIntCnt)
+#define cr_invalidrlen CREG_IDX(RxMaxMinLenErrCnt)
+#define cr_invalidslen CREG_IDX(TxMaxMinLenErrCnt)
+#define cr_lbflowstall CREG_IDX(LBFlowStallCnt)
+#define cr_pktrcv CREG_IDX(RxDataPktCnt)
+#define cr_pktrcvflowctrl CREG_IDX(RxFlowPktCnt)
+#define cr_pktsend CREG_IDX(TxDataPktCnt)
+#define cr_pktsendflow CREG_IDX(TxFlowPktCnt)
+#define cr_portovfl CREG_IDX(RxP0HdrEgrOvflCnt)
+#define cr_rcvebp CREG_IDX(RxEBPCnt)
+#define cr_rcvovfl CREG_IDX(RxBufOvflCnt)
+#define cr_senddropped CREG_IDX(TxDroppedPktCnt)
+#define cr_sendstall CREG_IDX(TxFlowStallCnt)
+#define cr_sendunderrun CREG_IDX(TxUnderrunCnt)
+#define cr_wordrcv CREG_IDX(RxDwordCnt)
+#define cr_wordsend CREG_IDX(TxDwordCnt)
+#define cr_txunsupvl CREG_IDX(TxUnsupVLErrCnt)
+#define cr_rxdroppkt CREG_IDX(RxDroppedPktCnt)
+#define cr_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt)
+#define cr_iblinkdown CREG_IDX(IBLinkDownedCnt)
+#define cr_ibsymbolerr CREG_IDX(IBSymbolErrCnt)
+
+#define SYM_RMASK(regname, fldname) ((u64)              \
+	QIB_6120_##regname##_##fldname##_RMASK)
+#define SYM_MASK(regname, fldname) ((u64)               \
+	QIB_6120_##regname##_##fldname##_RMASK <<       \
+	 QIB_6120_##regname##_##fldname##_LSB)
+#define SYM_LSB(regname, fldname) (QIB_6120_##regname##_##fldname##_LSB)
+
+#define SYM_FIELD(value, regname, fldname) ((u64) \
+	(((value) >> SYM_LSB(regname, fldname)) & \
+	 SYM_RMASK(regname, fldname)))
+#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask)
+#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask)
+
+/* link training states, from IBC */
+#define IB_6120_LT_STATE_DISABLED        0x00
+#define IB_6120_LT_STATE_LINKUP          0x01
+#define IB_6120_LT_STATE_POLLACTIVE      0x02
+#define IB_6120_LT_STATE_POLLQUIET       0x03
+#define IB_6120_LT_STATE_SLEEPDELAY      0x04
+#define IB_6120_LT_STATE_SLEEPQUIET      0x05
+#define IB_6120_LT_STATE_CFGDEBOUNCE     0x08
+#define IB_6120_LT_STATE_CFGRCVFCFG      0x09
+#define IB_6120_LT_STATE_CFGWAITRMT      0x0a
+#define IB_6120_LT_STATE_CFGIDLE 0x0b
+#define IB_6120_LT_STATE_RECOVERRETRAIN  0x0c
+#define IB_6120_LT_STATE_RECOVERWAITRMT  0x0e
+#define IB_6120_LT_STATE_RECOVERIDLE     0x0f
+
+/* link state machine states from IBC */
+#define IB_6120_L_STATE_DOWN             0x0
+#define IB_6120_L_STATE_INIT             0x1
+#define IB_6120_L_STATE_ARM              0x2
+#define IB_6120_L_STATE_ACTIVE           0x3
+#define IB_6120_L_STATE_ACT_DEFER        0x4
+
+static const u8 qib_6120_physportstate[0x20] = {
+	[IB_6120_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
+	[IB_6120_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
+	[IB_6120_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
+	[IB_6120_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
+	[IB_6120_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
+	[IB_6120_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
+	[IB_6120_LT_STATE_CFGDEBOUNCE] =
+		IB_PHYSPORTSTATE_CFG_TRAIN,
+	[IB_6120_LT_STATE_CFGRCVFCFG] =
+		IB_PHYSPORTSTATE_CFG_TRAIN,
+	[IB_6120_LT_STATE_CFGWAITRMT] =
+		IB_PHYSPORTSTATE_CFG_TRAIN,
+	[IB_6120_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[IB_6120_LT_STATE_RECOVERRETRAIN] =
+		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+	[IB_6120_LT_STATE_RECOVERWAITRMT] =
+		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+	[IB_6120_LT_STATE_RECOVERIDLE] =
+		IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
+	[0x10] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[0x11] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[0x13] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
+	[0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
+};
+
+
+struct qib_chip_specific {
+	u64 __iomem *cregbase;
+	u64 *cntrs;
+	u64 *portcntrs;
+	void *dummy_hdrq;   /* used after ctxt close */
+	dma_addr_t dummy_hdrq_phys;
+	spinlock_t kernel_tid_lock; /* no back to back kernel TID writes */
+	spinlock_t user_tid_lock; /* no back to back user TID writes */
+	spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */
+	spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */
+	u64 hwerrmask;
+	u64 errormask;
+	u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */
+	u64 gpio_mask; /* shadow the gpio mask register */
+	u64 extctrl; /* shadow the gpio output enable, etc... */
+	/*
+	 * these 5 fields are used to establish deltas for IB symbol
+	 * errors and linkrecovery errors.  They can be reported on
+	 * some chips during link negotiation prior to INIT, and with
+	 * DDR when faking DDR negotiations with non-IBTA switches.
+	 * The chip counters are adjusted at driver unload if there is
+	 * a non-zero delta.
+	 */
+	u64 ibdeltainprog;
+	u64 ibsymdelta;
+	u64 ibsymsnap;
+	u64 iblnkerrdelta;
+	u64 iblnkerrsnap;
+	u64 ibcctrl; /* shadow for kr_ibcctrl */
+	u32 lastlinkrecov; /* link recovery issue */
+	u32 cntrnamelen;
+	u32 portcntrnamelen;
+	u32 ncntrs;
+	u32 nportcntrs;
+	/* used with gpio interrupts to implement IB counters */
+	u32 rxfc_unsupvl_errs;
+	u32 overrun_thresh_errs;
+	/*
+	 * these count only cases where _successive_ LocalLinkIntegrity
+	 * errors were seen in the receive headers of IB standard packets
+	 */
+	u32 lli_errs;
+	u32 lli_counter;
+	u64 lli_thresh;
+	u64 sword; /* total dwords sent (sample result) */
+	u64 rword; /* total dwords received (sample result) */
+	u64 spkts; /* total packets sent (sample result) */
+	u64 rpkts; /* total packets received (sample result) */
+	u64 xmit_wait; /* # of ticks no data sent (sample result) */
+	struct timer_list pma_timer;
+	struct qib_pportdata *ppd;
+	char emsgbuf[128];
+	char bitsmsgbuf[64];
+	u8 pma_sample_status;
+};
+
+/* ibcctrl bits */
+#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
+/* cycle through TS1/TS2 till OK */
+#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3
+#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16
+
+#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1           /* move to 0x11 */
+#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2          /* move to 0x21 */
+#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
+#define QLOGIC_IB_IBCC_LINKCMD_SHIFT 18
+
+/*
+ * We could have a single register get/put routine, that takes a group type,
+ * but this is somewhat clearer and cleaner.  It also gives us some error
+ * checking.  64 bit register reads should always work, but are inefficient
+ * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
+ * so we use kreg32 wherever possible.  User register and counter register
+ * reads are always 32 bit reads, so only one form of those routines.
+ */
+
+/**
+ * qib_read_ureg32 - read 32-bit virtualized per-context register
+ * @dd: device
+ * @regno: register number
+ * @ctxt: context number
+ *
+ * Return the contents of a register that is virtualized to be per context.
+ * Returns -1 on errors (not distinguishable from valid contents at
+ * runtime; we may add a separate error variable at some point).
+ */
+static inline u32 qib_read_ureg32(const struct qib_devdata *dd,
+				  enum qib_ureg regno, int ctxt)
+{
+	if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+		return 0;
+
+	if (dd->userbase)
+		return readl(regno + (u64 __iomem *)
+			     ((char __iomem *)dd->userbase +
+			      dd->ureg_align * ctxt));
+	else
+		return readl(regno + (u64 __iomem *)
+			     (dd->uregbase +
+			      (char __iomem *)dd->kregbase +
+			      dd->ureg_align * ctxt));
+}
+
+/**
+ * qib_write_ureg - write 32-bit virtualized per-context register
+ * @dd: device
+ * @regno: register number
+ * @value: value
+ * @ctxt: context
+ *
+ * Write the contents of a register that is virtualized to be per context.
+ */
+static inline void qib_write_ureg(const struct qib_devdata *dd,
+				  enum qib_ureg regno, u64 value, int ctxt)
+{
+	u64 __iomem *ubase;
+
+	if (dd->userbase)
+		ubase = (u64 __iomem *)
+			((char __iomem *) dd->userbase +
+			 dd->ureg_align * ctxt);
+	else
+		ubase = (u64 __iomem *)
+			(dd->uregbase +
+			 (char __iomem *) dd->kregbase +
+			 dd->ureg_align * ctxt);
+
+	if (dd->kregbase && (dd->flags & QIB_PRESENT))
+		writeq(value, &ubase[regno]);
+}
+
+static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
+				  const u16 regno)
+{
+	if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+		return -1;
+	return readl((u32 __iomem *)&dd->kregbase[regno]);
+}
+
+static inline u64 qib_read_kreg64(const struct qib_devdata *dd,
+				  const u16 regno)
+{
+	if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
+		return -1;
+
+	return readq(&dd->kregbase[regno]);
+}
+
+static inline void qib_write_kreg(const struct qib_devdata *dd,
+				  const u16 regno, u64 value)
+{
+	if (dd->kregbase && (dd->flags & QIB_PRESENT))
+		writeq(value, &dd->kregbase[regno]);
+}
+
+/**
+ * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register
+ * @dd: the qlogic_ib device
+ * @regno: the register number to write
+ * @ctxt: the context containing the register
+ * @value: the value to write
+ */
+static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd,
+				       const u16 regno, unsigned ctxt,
+				       u64 value)
+{
+	qib_write_kreg(dd, regno + ctxt, value);
+}
+
+static inline void write_6120_creg(const struct qib_devdata *dd,
+				   u16 regno, u64 value)
+{
+	if (dd->cspec->cregbase && (dd->flags & QIB_PRESENT))
+		writeq(value, &dd->cspec->cregbase[regno]);
+}
+
+static inline u64 read_6120_creg(const struct qib_devdata *dd, u16 regno)
+{
+	if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
+		return 0;
+	return readq(&dd->cspec->cregbase[regno]);
+}
+
+static inline u32 read_6120_creg32(const struct qib_devdata *dd, u16 regno)
+{
+	if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
+		return 0;
+	return readl(&dd->cspec->cregbase[regno]);
+}
+
+/* kr_control bits */
+#define QLOGIC_IB_C_RESET 1U
+
+/* kr_intstatus, kr_intclear, kr_intmask bits */
+#define QLOGIC_IB_I_RCVURG_MASK ((1U << 5) - 1)
+#define QLOGIC_IB_I_RCVURG_SHIFT 0
+#define QLOGIC_IB_I_RCVAVAIL_MASK ((1U << 5) - 1)
+#define QLOGIC_IB_I_RCVAVAIL_SHIFT 12
+
+#define QLOGIC_IB_C_FREEZEMODE 0x00000002
+#define QLOGIC_IB_C_LINKENABLE 0x00000004
+#define QLOGIC_IB_I_ERROR               0x0000000080000000ULL
+#define QLOGIC_IB_I_SPIOSENT            0x0000000040000000ULL
+#define QLOGIC_IB_I_SPIOBUFAVAIL        0x0000000020000000ULL
+#define QLOGIC_IB_I_GPIO                0x0000000010000000ULL
+#define QLOGIC_IB_I_BITSEXTANT \
+		((QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT) | \
+		(QLOGIC_IB_I_RCVAVAIL_MASK << \
+		 QLOGIC_IB_I_RCVAVAIL_SHIFT) | \
+		QLOGIC_IB_I_ERROR | QLOGIC_IB_I_SPIOSENT | \
+		QLOGIC_IB_I_SPIOBUFAVAIL | QLOGIC_IB_I_GPIO)
+
+/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
+#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK  0x000000000000003fULL
+#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT 0
+#define QLOGIC_IB_HWE_PCIEPOISONEDTLP      0x0000000010000000ULL
+#define QLOGIC_IB_HWE_PCIECPLTIMEOUT       0x0000000020000000ULL
+#define QLOGIC_IB_HWE_PCIEBUSPARITYXTLH    0x0000000040000000ULL
+#define QLOGIC_IB_HWE_PCIEBUSPARITYXADM    0x0000000080000000ULL
+#define QLOGIC_IB_HWE_PCIEBUSPARITYRADM    0x0000000100000000ULL
+#define QLOGIC_IB_HWE_COREPLL_FBSLIP       0x0080000000000000ULL
+#define QLOGIC_IB_HWE_COREPLL_RFSLIP       0x0100000000000000ULL
+#define QLOGIC_IB_HWE_PCIE1PLLFAILED       0x0400000000000000ULL
+#define QLOGIC_IB_HWE_PCIE0PLLFAILED       0x0800000000000000ULL
+#define QLOGIC_IB_HWE_SERDESPLLFAILED      0x1000000000000000ULL
+
+
+/* kr_extstatus bits */
+#define QLOGIC_IB_EXTS_FREQSEL 0x2
+#define QLOGIC_IB_EXTS_SERDESSEL 0x4
+#define QLOGIC_IB_EXTS_MEMBIST_ENDTEST     0x0000000000004000
+#define QLOGIC_IB_EXTS_MEMBIST_FOUND       0x0000000000008000
+
+/* kr_xgxsconfig bits */
+#define QLOGIC_IB_XGXS_RESET          0x5ULL
+
+#define _QIB_GPIO_SDA_NUM 1
+#define _QIB_GPIO_SCL_NUM 0
+
+/* Bits in GPIO for the added IB link interrupts */
+#define GPIO_RXUVL_BIT 3
+#define GPIO_OVRUN_BIT 4
+#define GPIO_LLI_BIT 5
+#define GPIO_ERRINTR_MASK 0x38
+
+
+#define QLOGIC_IB_RT_BUFSIZE_MASK 0xe0000000ULL
+#define QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid) \
+	((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) >> 29) + 11 - 1)
+#define QLOGIC_IB_RT_BUFSIZE(tid) (1 << QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid))
+#define QLOGIC_IB_RT_IS_VALID(tid) \
+	(((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) && \
+	 ((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) != QLOGIC_IB_RT_BUFSIZE_MASK)))
+#define QLOGIC_IB_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */
+#define QLOGIC_IB_RT_ADDR_SHIFT 10
+
+#define QLOGIC_IB_R_INTRAVAIL_SHIFT 16
+#define QLOGIC_IB_R_TAILUPD_SHIFT 31
+#define IBA6120_R_PKEY_DIS_SHIFT 30
+
+#define PBC_6120_VL15_SEND_CTRL (1ULL << 31) /* pbc; VL15; link_buf only */
+
+#define IBCBUSFRSPCPARITYERR HWE_MASK(IBCBusFromSPCParityErr)
+#define IBCBUSTOSPCPARITYERR HWE_MASK(IBCBusToSPCParityErr)
+
+#define SYM_MASK_BIT(regname, fldname, bit) ((u64) \
+	((1ULL << (SYM_LSB(regname, fldname) + (bit)))))
+
+#define TXEMEMPARITYERR_PIOBUF \
+	SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 0)
+#define TXEMEMPARITYERR_PIOPBC \
+	SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 1)
+#define TXEMEMPARITYERR_PIOLAUNCHFIFO \
+	SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 2)
+
+#define RXEMEMPARITYERR_RCVBUF \
+	SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 0)
+#define RXEMEMPARITYERR_LOOKUPQ \
+	SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 1)
+#define RXEMEMPARITYERR_EXPTID \
+	SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 2)
+#define RXEMEMPARITYERR_EAGERTID \
+	SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 3)
+#define RXEMEMPARITYERR_FLAGBUF \
+	SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 4)
+#define RXEMEMPARITYERR_DATAINFO \
+	SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 5)
+#define RXEMEMPARITYERR_HDRINFO \
+	SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 6)
+
+/* 6120 specific hardware errors... */
+static const struct qib_hwerror_msgs qib_6120_hwerror_msgs[] = {
+	/* generic hardware errors */
+	QLOGIC_IB_HWE_MSG(IBCBUSFRSPCPARITYERR, "QIB2IB Parity"),
+	QLOGIC_IB_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2QIB Parity"),
+
+	QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOBUF,
+			  "TXE PIOBUF Memory Parity"),
+	QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOPBC,
+			  "TXE PIOPBC Memory Parity"),
+	QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOLAUNCHFIFO,
+			  "TXE PIOLAUNCHFIFO Memory Parity"),
+
+	QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_RCVBUF,
+			  "RXE RCVBUF Memory Parity"),
+	QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_LOOKUPQ,
+			  "RXE LOOKUPQ Memory Parity"),
+	QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EAGERTID,
+			  "RXE EAGERTID Memory Parity"),
+	QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EXPTID,
+			  "RXE EXPTID Memory Parity"),
+	QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_FLAGBUF,
+			  "RXE FLAGBUF Memory Parity"),
+	QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_DATAINFO,
+			  "RXE DATAINFO Memory Parity"),
+	QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_HDRINFO,
+			  "RXE HDRINFO Memory Parity"),
+
+	/* chip-specific hardware errors */
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEPOISONEDTLP,
+			  "PCIe Poisoned TLP"),
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLTIMEOUT,
+			  "PCIe completion timeout"),
+	/*
+	 * In practice, it's unlikely wthat we'll see PCIe PLL, or bus
+	 * parity or memory parity error failures, because most likely we
+	 * won't be able to talk to the core of the chip.  Nonetheless, we
+	 * might see them, if they are in parts of the PCIe core that aren't
+	 * essential.
+	 */
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE1PLLFAILED,
+			  "PCIePLL1"),
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE0PLLFAILED,
+			  "PCIePLL0"),
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXTLH,
+			  "PCIe XTLH core parity"),
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXADM,
+			  "PCIe ADM TX core parity"),
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYRADM,
+			  "PCIe ADM RX core parity"),
+	QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SERDESPLLFAILED,
+			  "SerDes PLL"),
+};
+
+#define TXE_PIO_PARITY (TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC)
+#define _QIB_PLL_FAIL (QLOGIC_IB_HWE_COREPLL_FBSLIP |   \
+		QLOGIC_IB_HWE_COREPLL_RFSLIP)
+
+	/* variables for sanity checking interrupt and errors */
+#define IB_HWE_BITSEXTANT \
+	(HWE_MASK(RXEMemParityErr) |					\
+	 HWE_MASK(TXEMemParityErr) |					\
+	 (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK <<			\
+	  QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) |			\
+	 QLOGIC_IB_HWE_PCIE1PLLFAILED |					\
+	 QLOGIC_IB_HWE_PCIE0PLLFAILED |					\
+	 QLOGIC_IB_HWE_PCIEPOISONEDTLP |				\
+	 QLOGIC_IB_HWE_PCIECPLTIMEOUT |					\
+	 QLOGIC_IB_HWE_PCIEBUSPARITYXTLH |				\
+	 QLOGIC_IB_HWE_PCIEBUSPARITYXADM |				\
+	 QLOGIC_IB_HWE_PCIEBUSPARITYRADM |				\
+	 HWE_MASK(PowerOnBISTFailed) |					\
+	 QLOGIC_IB_HWE_COREPLL_FBSLIP |					\
+	 QLOGIC_IB_HWE_COREPLL_RFSLIP |					\
+	 QLOGIC_IB_HWE_SERDESPLLFAILED |				\
+	 HWE_MASK(IBCBusToSPCParityErr) |				\
+	 HWE_MASK(IBCBusFromSPCParityErr))
+
+#define IB_E_BITSEXTANT \
+	(ERR_MASK(RcvFormatErr) | ERR_MASK(RcvVCRCErr) |		\
+	 ERR_MASK(RcvICRCErr) | ERR_MASK(RcvMinPktLenErr) |		\
+	 ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvLongPktLenErr) |	\
+	 ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvUnexpectedCharErr) | \
+	 ERR_MASK(RcvUnsupportedVLErr) | ERR_MASK(RcvEBPErr) |		\
+	 ERR_MASK(RcvIBFlowErr) | ERR_MASK(RcvBadVersionErr) |		\
+	 ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) |		\
+	 ERR_MASK(RcvBadTidErr) | ERR_MASK(RcvHdrLenErr) |		\
+	 ERR_MASK(RcvHdrErr) | ERR_MASK(RcvIBLostLinkErr) |		\
+	 ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendMaxPktLenErr) |	\
+	 ERR_MASK(SendUnderRunErr) | ERR_MASK(SendPktLenErr) |		\
+	 ERR_MASK(SendDroppedSmpPktErr) |				\
+	 ERR_MASK(SendDroppedDataPktErr) |				\
+	 ERR_MASK(SendPioArmLaunchErr) |				\
+	 ERR_MASK(SendUnexpectedPktNumErr) |				\
+	 ERR_MASK(SendUnsupportedVLErr) | ERR_MASK(IBStatusChanged) |	\
+	 ERR_MASK(InvalidAddrErr) | ERR_MASK(ResetNegated) |		\
+	 ERR_MASK(HardwareErr))
+
+#define QLOGIC_IB_E_PKTERRS ( \
+		ERR_MASK(SendPktLenErr) |				\
+		ERR_MASK(SendDroppedDataPktErr) |			\
+		ERR_MASK(RcvVCRCErr) |					\
+		ERR_MASK(RcvICRCErr) |					\
+		ERR_MASK(RcvShortPktLenErr) |				\
+		ERR_MASK(RcvEBPErr))
+
+/* These are all rcv-related errors which we want to count for stats */
+#define E_SUM_PKTERRS						\
+	(ERR_MASK(RcvHdrLenErr) | ERR_MASK(RcvBadTidErr) |		\
+	 ERR_MASK(RcvBadVersionErr) | ERR_MASK(RcvHdrErr) |		\
+	 ERR_MASK(RcvLongPktLenErr) | ERR_MASK(RcvShortPktLenErr) |	\
+	 ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvMinPktLenErr) |	\
+	 ERR_MASK(RcvFormatErr) | ERR_MASK(RcvUnsupportedVLErr) |	\
+	 ERR_MASK(RcvUnexpectedCharErr) | ERR_MASK(RcvEBPErr))
+
+/* These are all send-related errors which we want to count for stats */
+#define E_SUM_ERRS							\
+	(ERR_MASK(SendPioArmLaunchErr) |				\
+	 ERR_MASK(SendUnexpectedPktNumErr) |				\
+	 ERR_MASK(SendDroppedDataPktErr) |				\
+	 ERR_MASK(SendDroppedSmpPktErr) |				\
+	 ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnsupportedVLErr) |	\
+	 ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) |		\
+	 ERR_MASK(InvalidAddrErr))
+
+/*
+ * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore
+ * errors not related to freeze and cancelling buffers.  Can't ignore
+ * armlaunch because could get more while still cleaning up, and need
+ * to cancel those as they happen.
+ */
+#define E_SPKT_ERRS_IGNORE \
+	(ERR_MASK(SendDroppedDataPktErr) |				\
+	 ERR_MASK(SendDroppedSmpPktErr) |				\
+	 ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendMinPktLenErr) |	\
+	 ERR_MASK(SendPktLenErr))
+
+/*
+ * these are errors that can occur when the link changes state while
+ * a packet is being sent or received.  This doesn't cover things
+ * like EBP or VCRC that can be the result of a sending having the
+ * link change state, so we receive a "known bad" packet.
+ */
+#define E_SUM_LINK_PKTERRS		\
+	(ERR_MASK(SendDroppedDataPktErr) |				\
+	 ERR_MASK(SendDroppedSmpPktErr) |				\
+	 ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) |		\
+	 ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvMinPktLenErr) |	\
+	 ERR_MASK(RcvUnexpectedCharErr))
+
+static void qib_6120_put_tid_2(struct qib_devdata *, u64 __iomem *,
+			       u32, unsigned long);
+
+/*
+ * On platforms using this chip, and not having ordered WC stores, we
+ * can get TXE parity errors due to speculative reads to the PIO buffers,
+ * and this, due to a chip issue can result in (many) false parity error
+ * reports.  So it's a debug print on those, and an info print on systems
+ * where the speculative reads don't occur.
+ */
+static void qib_6120_txe_recover(struct qib_devdata *dd)
+{
+	if (!qib_unordered_wc())
+		qib_devinfo(dd->pcidev,
+			    "Recovering from TXE PIO parity error\n");
+}
+
+/* enable/disable chip from delivering interrupts */
+static void qib_6120_set_intr_state(struct qib_devdata *dd, u32 enable)
+{
+	if (enable) {
+		if (dd->flags & QIB_BADINTR)
+			return;
+		qib_write_kreg(dd, kr_intmask, ~0ULL);
+		/* force re-interrupt of any pending interrupts. */
+		qib_write_kreg(dd, kr_intclear, 0ULL);
+	} else
+		qib_write_kreg(dd, kr_intmask, 0ULL);
+}
+
+/*
+ * Try to cleanup as much as possible for anything that might have gone
+ * wrong while in freeze mode, such as pio buffers being written by user
+ * processes (causing armlaunch), send errors due to going into freeze mode,
+ * etc., and try to avoid causing extra interrupts while doing so.
+ * Forcibly update the in-memory pioavail register copies after cleanup
+ * because the chip won't do it while in freeze mode (the register values
+ * themselves are kept correct).
+ * Make sure that we don't lose any important interrupts by using the chip
+ * feature that says that writing 0 to a bit in *clear that is set in
+ * *status will cause an interrupt to be generated again (if allowed by
+ * the *mask value).
+ * This is in chip-specific code because of all of the register accesses,
+ * even though the details are similar on most chips
+ */
+static void qib_6120_clear_freeze(struct qib_devdata *dd)
+{
+	/* disable error interrupts, to avoid confusion */
+	qib_write_kreg(dd, kr_errmask, 0ULL);
+
+	/* also disable interrupts; errormask is sometimes overwritten */
+	qib_6120_set_intr_state(dd, 0);
+
+	qib_cancel_sends(dd->pport);
+
+	/* clear the freeze, and be sure chip saw it */
+	qib_write_kreg(dd, kr_control, dd->control);
+	qib_read_kreg32(dd, kr_scratch);
+
+	/* force in-memory update now we are out of freeze */
+	qib_force_pio_avail_update(dd);
+
+	/*
+	 * force new interrupt if any hwerr, error or interrupt bits are
+	 * still set, and clear "safe" send packet errors related to freeze
+	 * and cancelling sends.  Re-enable error interrupts before possible
+	 * force of re-interrupt on pending interrupts.
+	 */
+	qib_write_kreg(dd, kr_hwerrclear, 0ULL);
+	qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE);
+	qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
+	qib_6120_set_intr_state(dd, 1);
+}
+
+/**
+ * qib_handle_6120_hwerrors - display hardware errors.
+ * @dd: the qlogic_ib device
+ * @msg: the output buffer
+ * @msgl: the size of the output buffer
+ *
+ * Use same msg buffer as regular errors to avoid excessive stack
+ * use.  Most hardware errors are catastrophic, but for right now,
+ * we'll print them and continue.  Reuse the same message buffer as
+ * handle_6120_errors() to avoid excessive stack usage.
+ */
+static void qib_handle_6120_hwerrors(struct qib_devdata *dd, char *msg,
+				     size_t msgl)
+{
+	u64 hwerrs;
+	u32 bits, ctrl;
+	int isfatal = 0;
+	char *bitsmsg;
+
+	hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
+	if (!hwerrs)
+		return;
+	if (hwerrs == ~0ULL) {
+		qib_dev_err(dd,
+			"Read of hardware error status failed (all bits set); ignoring\n");
+		return;
+	}
+	qib_stats.sps_hwerrs++;
+
+	/* Always clear the error status register, except MEMBISTFAIL,
+	 * regardless of whether we continue or stop using the chip.
+	 * We want that set so we know it failed, even across driver reload.
+	 * We'll still ignore it in the hwerrmask.  We do this partly for
+	 * diagnostics, but also for support */
+	qib_write_kreg(dd, kr_hwerrclear,
+		       hwerrs & ~HWE_MASK(PowerOnBISTFailed));
+
+	hwerrs &= dd->cspec->hwerrmask;
+
+	/*
+	 * Make sure we get this much out, unless told to be quiet,
+	 * or it's occurred within the last 5 seconds.
+	 */
+	if (hwerrs & ~(TXE_PIO_PARITY | RXEMEMPARITYERR_EAGERTID))
+		qib_devinfo(dd->pcidev,
+			"Hardware error: hwerr=0x%llx (cleared)\n",
+			(unsigned long long) hwerrs);
+
+	if (hwerrs & ~IB_HWE_BITSEXTANT)
+		qib_dev_err(dd,
+			"hwerror interrupt with unknown errors %llx set\n",
+			(unsigned long long)(hwerrs & ~IB_HWE_BITSEXTANT));
+
+	ctrl = qib_read_kreg32(dd, kr_control);
+	if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) {
+		/*
+		 * Parity errors in send memory are recoverable,
+		 * just cancel the send (if indicated in * sendbuffererror),
+		 * count the occurrence, unfreeze (if no other handled
+		 * hardware error bits are set), and continue. They can
+		 * occur if a processor speculative read is done to the PIO
+		 * buffer while we are sending a packet, for example.
+		 */
+		if (hwerrs & TXE_PIO_PARITY) {
+			qib_6120_txe_recover(dd);
+			hwerrs &= ~TXE_PIO_PARITY;
+		}
+
+		if (!hwerrs) {
+			static u32 freeze_cnt;
+
+			freeze_cnt++;
+			qib_6120_clear_freeze(dd);
+		} else
+			isfatal = 1;
+	}
+
+	*msg = '\0';
+
+	if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
+		isfatal = 1;
+		strlcat(msg,
+			"[Memory BIST test failed, InfiniPath hardware unusable]",
+			msgl);
+		/* ignore from now on, so disable until driver reloaded */
+		dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
+		qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+	}
+
+	qib_format_hwerrors(hwerrs, qib_6120_hwerror_msgs,
+			    ARRAY_SIZE(qib_6120_hwerror_msgs), msg, msgl);
+
+	bitsmsg = dd->cspec->bitsmsgbuf;
+	if (hwerrs & (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK <<
+		      QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT)) {
+		bits = (u32) ((hwerrs >>
+			       QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) &
+			      QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK);
+		snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf),
+			 "[PCIe Mem Parity Errs %x] ", bits);
+		strlcat(msg, bitsmsg, msgl);
+	}
+
+	if (hwerrs & _QIB_PLL_FAIL) {
+		isfatal = 1;
+		snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf),
+			 "[PLL failed (%llx), InfiniPath hardware unusable]",
+			 (unsigned long long) hwerrs & _QIB_PLL_FAIL);
+		strlcat(msg, bitsmsg, msgl);
+		/* ignore from now on, so disable until driver reloaded */
+		dd->cspec->hwerrmask &= ~(hwerrs & _QIB_PLL_FAIL);
+		qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+	}
+
+	if (hwerrs & QLOGIC_IB_HWE_SERDESPLLFAILED) {
+		/*
+		 * If it occurs, it is left masked since the external
+		 * interface is unused
+		 */
+		dd->cspec->hwerrmask &= ~QLOGIC_IB_HWE_SERDESPLLFAILED;
+		qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+	}
+
+	if (hwerrs)
+		/*
+		 * if any set that we aren't ignoring; only
+		 * make the complaint once, in case it's stuck
+		 * or recurring, and we get here multiple
+		 * times.
+		 */
+		qib_dev_err(dd, "%s hardware error\n", msg);
+	else
+		*msg = 0; /* recovered from all of them */
+
+	if (isfatal && !dd->diag_client) {
+		qib_dev_err(dd,
+			"Fatal Hardware Error, no longer usable, SN %.16s\n",
+			dd->serial);
+		/*
+		 * for /sys status file and user programs to print; if no
+		 * trailing brace is copied, we'll know it was truncated.
+		 */
+		if (dd->freezemsg)
+			snprintf(dd->freezemsg, dd->freezelen,
+				 "{%s}", msg);
+		qib_disable_after_error(dd);
+	}
+}
+
+/*
+ * Decode the error status into strings, deciding whether to always
+ * print * it or not depending on "normal packet errors" vs everything
+ * else.   Return 1 if "real" errors, otherwise 0 if only packet
+ * errors, so caller can decide what to print with the string.
+ */
+static int qib_decode_6120_err(struct qib_devdata *dd, char *buf, size_t blen,
+			       u64 err)
+{
+	int iserr = 1;
+
+	*buf = '\0';
+	if (err & QLOGIC_IB_E_PKTERRS) {
+		if (!(err & ~QLOGIC_IB_E_PKTERRS))
+			iserr = 0;
+		if ((err & ERR_MASK(RcvICRCErr)) &&
+		    !(err&(ERR_MASK(RcvVCRCErr)|ERR_MASK(RcvEBPErr))))
+			strlcat(buf, "CRC ", blen);
+		if (!iserr)
+			goto done;
+	}
+	if (err & ERR_MASK(RcvHdrLenErr))
+		strlcat(buf, "rhdrlen ", blen);
+	if (err & ERR_MASK(RcvBadTidErr))
+		strlcat(buf, "rbadtid ", blen);
+	if (err & ERR_MASK(RcvBadVersionErr))
+		strlcat(buf, "rbadversion ", blen);
+	if (err & ERR_MASK(RcvHdrErr))
+		strlcat(buf, "rhdr ", blen);
+	if (err & ERR_MASK(RcvLongPktLenErr))
+		strlcat(buf, "rlongpktlen ", blen);
+	if (err & ERR_MASK(RcvMaxPktLenErr))
+		strlcat(buf, "rmaxpktlen ", blen);
+	if (err & ERR_MASK(RcvMinPktLenErr))
+		strlcat(buf, "rminpktlen ", blen);
+	if (err & ERR_MASK(SendMinPktLenErr))
+		strlcat(buf, "sminpktlen ", blen);
+	if (err & ERR_MASK(RcvFormatErr))
+		strlcat(buf, "rformaterr ", blen);
+	if (err & ERR_MASK(RcvUnsupportedVLErr))
+		strlcat(buf, "runsupvl ", blen);
+	if (err & ERR_MASK(RcvUnexpectedCharErr))
+		strlcat(buf, "runexpchar ", blen);
+	if (err & ERR_MASK(RcvIBFlowErr))
+		strlcat(buf, "ribflow ", blen);
+	if (err & ERR_MASK(SendUnderRunErr))
+		strlcat(buf, "sunderrun ", blen);
+	if (err & ERR_MASK(SendPioArmLaunchErr))
+		strlcat(buf, "spioarmlaunch ", blen);
+	if (err & ERR_MASK(SendUnexpectedPktNumErr))
+		strlcat(buf, "sunexperrpktnum ", blen);
+	if (err & ERR_MASK(SendDroppedSmpPktErr))
+		strlcat(buf, "sdroppedsmppkt ", blen);
+	if (err & ERR_MASK(SendMaxPktLenErr))
+		strlcat(buf, "smaxpktlen ", blen);
+	if (err & ERR_MASK(SendUnsupportedVLErr))
+		strlcat(buf, "sunsupVL ", blen);
+	if (err & ERR_MASK(InvalidAddrErr))
+		strlcat(buf, "invalidaddr ", blen);
+	if (err & ERR_MASK(RcvEgrFullErr))
+		strlcat(buf, "rcvegrfull ", blen);
+	if (err & ERR_MASK(RcvHdrFullErr))
+		strlcat(buf, "rcvhdrfull ", blen);
+	if (err & ERR_MASK(IBStatusChanged))
+		strlcat(buf, "ibcstatuschg ", blen);
+	if (err & ERR_MASK(RcvIBLostLinkErr))
+		strlcat(buf, "riblostlink ", blen);
+	if (err & ERR_MASK(HardwareErr))
+		strlcat(buf, "hardware ", blen);
+	if (err & ERR_MASK(ResetNegated))
+		strlcat(buf, "reset ", blen);
+done:
+	return iserr;
+}
+
+/*
+ * Called when we might have an error that is specific to a particular
+ * PIO buffer, and may need to cancel that buffer, so it can be re-used.
+ */
+static void qib_disarm_6120_senderrbufs(struct qib_pportdata *ppd)
+{
+	unsigned long sbuf[2];
+	struct qib_devdata *dd = ppd->dd;
+
+	/*
+	 * It's possible that sendbuffererror could have bits set; might
+	 * have already done this as a result of hardware error handling.
+	 */
+	sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror);
+	sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1);
+
+	if (sbuf[0] || sbuf[1])
+		qib_disarm_piobufs_set(dd, sbuf,
+				       dd->piobcnt2k + dd->piobcnt4k);
+}
+
+static int chk_6120_linkrecovery(struct qib_devdata *dd, u64 ibcs)
+{
+	int ret = 1;
+	u32 ibstate = qib_6120_iblink_state(ibcs);
+	u32 linkrecov = read_6120_creg32(dd, cr_iblinkerrrecov);
+
+	if (linkrecov != dd->cspec->lastlinkrecov) {
+		/* and no more until active again */
+		dd->cspec->lastlinkrecov = 0;
+		qib_set_linkstate(dd->pport, QIB_IB_LINKDOWN);
+		ret = 0;
+	}
+	if (ibstate == IB_PORT_ACTIVE)
+		dd->cspec->lastlinkrecov =
+			read_6120_creg32(dd, cr_iblinkerrrecov);
+	return ret;
+}
+
+static void handle_6120_errors(struct qib_devdata *dd, u64 errs)
+{
+	char *msg;
+	u64 ignore_this_time = 0;
+	u64 iserr = 0;
+	struct qib_pportdata *ppd = dd->pport;
+	u64 mask;
+
+	/* don't report errors that are masked */
+	errs &= dd->cspec->errormask;
+	msg = dd->cspec->emsgbuf;
+
+	/* do these first, they are most important */
+	if (errs & ERR_MASK(HardwareErr))
+		qib_handle_6120_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf));
+
+	if (errs & ~IB_E_BITSEXTANT)
+		qib_dev_err(dd,
+			"error interrupt with unknown errors %llx set\n",
+			(unsigned long long) (errs & ~IB_E_BITSEXTANT));
+
+	if (errs & E_SUM_ERRS) {
+		qib_disarm_6120_senderrbufs(ppd);
+		if ((errs & E_SUM_LINK_PKTERRS) &&
+		    !(ppd->lflags & QIBL_LINKACTIVE)) {
+			/*
+			 * This can happen when trying to bring the link
+			 * up, but the IB link changes state at the "wrong"
+			 * time. The IB logic then complains that the packet
+			 * isn't valid.  We don't want to confuse people, so
+			 * we just don't print them, except at debug
+			 */
+			ignore_this_time = errs & E_SUM_LINK_PKTERRS;
+		}
+	} else if ((errs & E_SUM_LINK_PKTERRS) &&
+		   !(ppd->lflags & QIBL_LINKACTIVE)) {
+		/*
+		 * This can happen when SMA is trying to bring the link
+		 * up, but the IB link changes state at the "wrong" time.
+		 * The IB logic then complains that the packet isn't
+		 * valid.  We don't want to confuse people, so we just
+		 * don't print them, except at debug
+		 */
+		ignore_this_time = errs & E_SUM_LINK_PKTERRS;
+	}
+
+	qib_write_kreg(dd, kr_errclear, errs);
+
+	errs &= ~ignore_this_time;
+	if (!errs)
+		goto done;
+
+	/*
+	 * The ones we mask off are handled specially below
+	 * or above.
+	 */
+	mask = ERR_MASK(IBStatusChanged) | ERR_MASK(RcvEgrFullErr) |
+		ERR_MASK(RcvHdrFullErr) | ERR_MASK(HardwareErr);
+	qib_decode_6120_err(dd, msg, sizeof(dd->cspec->emsgbuf), errs & ~mask);
+
+	if (errs & E_SUM_PKTERRS)
+		qib_stats.sps_rcverrs++;
+	if (errs & E_SUM_ERRS)
+		qib_stats.sps_txerrs++;
+
+	iserr = errs & ~(E_SUM_PKTERRS | QLOGIC_IB_E_PKTERRS);
+
+	if (errs & ERR_MASK(IBStatusChanged)) {
+		u64 ibcs = qib_read_kreg64(dd, kr_ibcstatus);
+		u32 ibstate = qib_6120_iblink_state(ibcs);
+		int handle = 1;
+
+		if (ibstate != IB_PORT_INIT && dd->cspec->lastlinkrecov)
+			handle = chk_6120_linkrecovery(dd, ibcs);
+		/*
+		 * Since going into a recovery state causes the link state
+		 * to go down and since recovery is transitory, it is better
+		 * if we "miss" ever seeing the link training state go into
+		 * recovery (i.e., ignore this transition for link state
+		 * special handling purposes) without updating lastibcstat.
+		 */
+		if (handle && qib_6120_phys_portstate(ibcs) ==
+					    IB_PHYSPORTSTATE_LINK_ERR_RECOVER)
+			handle = 0;
+		if (handle)
+			qib_handle_e_ibstatuschanged(ppd, ibcs);
+	}
+
+	if (errs & ERR_MASK(ResetNegated)) {
+		qib_dev_err(dd,
+			"Got reset, requires re-init (unload and reload driver)\n");
+		dd->flags &= ~QIB_INITTED;  /* needs re-init */
+		/* mark as having had error */
+		*dd->devstatusp |= QIB_STATUS_HWERROR;
+		*dd->pport->statusp &= ~QIB_STATUS_IB_CONF;
+	}
+
+	if (*msg && iserr)
+		qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
+
+	if (ppd->state_wanted & ppd->lflags)
+		wake_up_interruptible(&ppd->state_wait);
+
+	/*
+	 * If there were hdrq or egrfull errors, wake up any processes
+	 * waiting in poll.  We used to try to check which contexts had
+	 * the overflow, but given the cost of that and the chip reads
+	 * to support it, it's better to just wake everybody up if we
+	 * get an overflow; waiters can poll again if it's not them.
+	 */
+	if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) {
+		qib_handle_urcv(dd, ~0U);
+		if (errs & ERR_MASK(RcvEgrFullErr))
+			qib_stats.sps_buffull++;
+		else
+			qib_stats.sps_hdrfull++;
+	}
+done:
+	return;
+}
+
+/**
+ * qib_6120_init_hwerrors - enable hardware errors
+ * @dd: the qlogic_ib device
+ *
+ * now that we have finished initializing everything that might reasonably
+ * cause a hardware error, and cleared those errors bits as they occur,
+ * we can enable hardware errors in the mask (potentially enabling
+ * freeze mode), and enable hardware errors as errors (along with
+ * everything else) in errormask
+ */
+static void qib_6120_init_hwerrors(struct qib_devdata *dd)
+{
+	u64 val;
+	u64 extsval;
+
+	extsval = qib_read_kreg64(dd, kr_extstatus);
+
+	if (!(extsval & QLOGIC_IB_EXTS_MEMBIST_ENDTEST))
+		qib_dev_err(dd, "MemBIST did not complete!\n");
+
+	/* init so all hwerrors interrupt, and enter freeze, ajdust below */
+	val = ~0ULL;
+	if (dd->minrev < 2) {
+		/*
+		 * Avoid problem with internal interface bus parity
+		 * checking. Fixed in Rev2.
+		 */
+		val &= ~QLOGIC_IB_HWE_PCIEBUSPARITYRADM;
+	}
+	/* avoid some intel cpu's speculative read freeze mode issue */
+	val &= ~TXEMEMPARITYERR_PIOBUF;
+
+	dd->cspec->hwerrmask = val;
+
+	qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed));
+	qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
+
+	/* clear all */
+	qib_write_kreg(dd, kr_errclear, ~0ULL);
+	/* enable errors that are masked, at least this first time. */
+	qib_write_kreg(dd, kr_errmask, ~0ULL);
+	dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask);
+	/* clear any interrupts up to this point (ints still not enabled) */
+	qib_write_kreg(dd, kr_intclear, ~0ULL);
+
+	qib_write_kreg(dd, kr_rcvbthqp,
+		       dd->qpn_mask << (QIB_6120_RcvBTHQP_BTHQP_Mask_LSB - 1) |
+		       QIB_KD_QP);
+}
+
+/*
+ * Disable and enable the armlaunch error.  Used for PIO bandwidth testing
+ * on chips that are count-based, rather than trigger-based.  There is no
+ * reference counting, but that's also fine, given the intended use.
+ * Only chip-specific because it's all register accesses
+ */
+static void qib_set_6120_armlaunch(struct qib_devdata *dd, u32 enable)
+{
+	if (enable) {
+		qib_write_kreg(dd, kr_errclear,
+			       ERR_MASK(SendPioArmLaunchErr));
+		dd->cspec->errormask |= ERR_MASK(SendPioArmLaunchErr);
+	} else
+		dd->cspec->errormask &= ~ERR_MASK(SendPioArmLaunchErr);
+	qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
+}
+
+/*
+ * Formerly took parameter <which> in pre-shifted,
+ * pre-merged form with LinkCmd and LinkInitCmd
+ * together, and assuming the zero was NOP.
+ */
+static void qib_set_ib_6120_lstate(struct qib_pportdata *ppd, u16 linkcmd,
+				   u16 linitcmd)
+{
+	u64 mod_wd;
+	struct qib_devdata *dd = ppd->dd;
+	unsigned long flags;
+
+	if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) {
+		/*
+		 * If we are told to disable, note that so link-recovery
+		 * code does not attempt to bring us back up.
+		 */
+		spin_lock_irqsave(&ppd->lflags_lock, flags);
+		ppd->lflags |= QIBL_IB_LINK_DISABLED;
+		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+	} else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) {
+		/*
+		 * Any other linkinitcmd will lead to LINKDOWN and then
+		 * to INIT (if all is well), so clear flag to let
+		 * link-recovery code attempt to bring us back up.
+		 */
+		spin_lock_irqsave(&ppd->lflags_lock, flags);
+		ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
+		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+	}
+
+	mod_wd = (linkcmd << QLOGIC_IB_IBCC_LINKCMD_SHIFT) |
+		(linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+
+	qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl | mod_wd);
+	/* write to chip to prevent back-to-back writes of control reg */
+	qib_write_kreg(dd, kr_scratch, 0);
+}
+
+/**
+ * qib_6120_bringup_serdes - bring up the serdes
+ * @ppd: the qlogic_ib device
+ */
+static int qib_6120_bringup_serdes(struct qib_pportdata *ppd)
+{
+	struct qib_devdata *dd = ppd->dd;
+	u64 val, config1, prev_val, hwstat, ibc;
+
+	/* Put IBC in reset, sends disabled */
+	dd->control &= ~QLOGIC_IB_C_LINKENABLE;
+	qib_write_kreg(dd, kr_control, 0ULL);
+
+	dd->cspec->ibdeltainprog = 1;
+	dd->cspec->ibsymsnap = read_6120_creg32(dd, cr_ibsymbolerr);
+	dd->cspec->iblnkerrsnap = read_6120_creg32(dd, cr_iblinkerrrecov);
+
+	/* flowcontrolwatermark is in units of KBytes */
+	ibc = 0x5ULL << SYM_LSB(IBCCtrl, FlowCtrlWaterMark);
+	/*
+	 * How often flowctrl sent.  More or less in usecs; balance against
+	 * watermark value, so that in theory senders always get a flow
+	 * control update in time to not let the IB link go idle.
+	 */
+	ibc |= 0x3ULL << SYM_LSB(IBCCtrl, FlowCtrlPeriod);
+	/* max error tolerance */
+	dd->cspec->lli_thresh = 0xf;
+	ibc |= (u64) dd->cspec->lli_thresh << SYM_LSB(IBCCtrl, PhyerrThreshold);
+	/* use "real" buffer space for */
+	ibc |= 4ULL << SYM_LSB(IBCCtrl, CreditScale);
+	/* IB credit flow control. */
+	ibc |= 0xfULL << SYM_LSB(IBCCtrl, OverrunThreshold);
+	/*
+	 * set initial max size pkt IBC will send, including ICRC; it's the
+	 * PIO buffer size in dwords, less 1; also see qib_set_mtu()
+	 */
+	ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrl, MaxPktLen);
+	dd->cspec->ibcctrl = ibc; /* without linkcmd or linkinitcmd! */
+
+	/* initially come up waiting for TS1, without sending anything. */
+	val = dd->cspec->ibcctrl | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
+		QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
+	qib_write_kreg(dd, kr_ibcctrl, val);
+
+	val = qib_read_kreg64(dd, kr_serdes_cfg0);
+	config1 = qib_read_kreg64(dd, kr_serdes_cfg1);
+
+	/*
+	 * Force reset on, also set rxdetect enable.  Must do before reading
+	 * serdesstatus at least for simulation, or some of the bits in
+	 * serdes status will come back as undefined and cause simulation
+	 * failures
+	 */
+	val |= SYM_MASK(SerdesCfg0, ResetPLL) |
+		SYM_MASK(SerdesCfg0, RxDetEnX) |
+		(SYM_MASK(SerdesCfg0, L1PwrDnA) |
+		 SYM_MASK(SerdesCfg0, L1PwrDnB) |
+		 SYM_MASK(SerdesCfg0, L1PwrDnC) |
+		 SYM_MASK(SerdesCfg0, L1PwrDnD));
+	qib_write_kreg(dd, kr_serdes_cfg0, val);
+	/* be sure chip saw it */
+	qib_read_kreg64(dd, kr_scratch);
+	udelay(5);              /* need pll reset set at least for a bit */
+	/*
+	 * after PLL is reset, set the per-lane Resets and TxIdle and
+	 * clear the PLL reset and rxdetect (to get falling edge).
+	 * Leave L1PWR bits set (permanently)
+	 */
+	val &= ~(SYM_MASK(SerdesCfg0, RxDetEnX) |
+		 SYM_MASK(SerdesCfg0, ResetPLL) |
+		 (SYM_MASK(SerdesCfg0, L1PwrDnA) |
+		  SYM_MASK(SerdesCfg0, L1PwrDnB) |
+		  SYM_MASK(SerdesCfg0, L1PwrDnC) |
+		  SYM_MASK(SerdesCfg0, L1PwrDnD)));
+	val |= (SYM_MASK(SerdesCfg0, ResetA) |
+		SYM_MASK(SerdesCfg0, ResetB) |
+		SYM_MASK(SerdesCfg0, ResetC) |
+		SYM_MASK(SerdesCfg0, ResetD)) |
+		SYM_MASK(SerdesCfg0, TxIdeEnX);
+	qib_write_kreg(dd, kr_serdes_cfg0, val);
+	/* be sure chip saw it */
+	(void) qib_read_kreg64(dd, kr_scratch);
+	/* need PLL reset clear for at least 11 usec before lane
+	 * resets cleared; give it a few more to be sure */
+	udelay(15);
+	val &= ~((SYM_MASK(SerdesCfg0, ResetA) |
+		  SYM_MASK(SerdesCfg0, ResetB) |
+		  SYM_MASK(SerdesCfg0, ResetC) |
+		  SYM_MASK(SerdesCfg0, ResetD)) |
+		 SYM_MASK(SerdesCfg0, TxIdeEnX));
+
+	qib_write_kreg(dd, kr_serdes_cfg0, val);
+	/* be sure chip saw it */
+	(void) qib_read_kreg64(dd, kr_scratch);
+
+	val = qib_read_kreg64(dd, kr_xgxs_cfg);
+	prev_val = val;
+	if (val & QLOGIC_IB_XGXS_RESET)
+		val &= ~QLOGIC_IB_XGXS_RESET;
+	if (SYM_FIELD(val, XGXSCfg, polarity_inv) != ppd->rx_pol_inv) {
+		/* need to compensate for Tx inversion in partner */
+		val &= ~SYM_MASK(XGXSCfg, polarity_inv);
+		val |= (u64)ppd->rx_pol_inv << SYM_LSB(XGXSCfg, polarity_inv);
+	}
+	if (val != prev_val)
+		qib_write_kreg(dd, kr_xgxs_cfg, val);
+
+	val = qib_read_kreg64(dd, kr_serdes_cfg0);
+
+	/* clear current and de-emphasis bits */
+	config1 &= ~0x0ffffffff00ULL;
+	/* set current to 20ma */
+	config1 |= 0x00000000000ULL;
+	/* set de-emphasis to -5.68dB */
+	config1 |= 0x0cccc000000ULL;
+	qib_write_kreg(dd, kr_serdes_cfg1, config1);
+
+	/* base and port guid same for single port */
+	ppd->guid = dd->base_guid;
+
+	/*
+	 * the process of setting and un-resetting the serdes normally
+	 * causes a serdes PLL error, so check for that and clear it
+	 * here.  Also clearr hwerr bit in errstatus, but not others.
+	 */
+	hwstat = qib_read_kreg64(dd, kr_hwerrstatus);
+	if (hwstat) {
+		/* should just have PLL, clear all set, in an case */
+		qib_write_kreg(dd, kr_hwerrclear, hwstat);
+		qib_write_kreg(dd, kr_errclear, ERR_MASK(HardwareErr));
+	}
+
+	dd->control |= QLOGIC_IB_C_LINKENABLE;
+	dd->control &= ~QLOGIC_IB_C_FREEZEMODE;
+	qib_write_kreg(dd, kr_control, dd->control);
+
+	return 0;
+}
+
+/**
+ * qib_6120_quiet_serdes - set serdes to txidle
+ * @ppd: physical port of the qlogic_ib device
+ * Called when driver is being unloaded
+ */
+static void qib_6120_quiet_serdes(struct qib_pportdata *ppd)
+{
+	struct qib_devdata *dd = ppd->dd;
+	u64 val;
+
+	qib_set_ib_6120_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
+
+	/* disable IBC */
+	dd->control &= ~QLOGIC_IB_C_LINKENABLE;
+	qib_write_kreg(dd, kr_control,
+		       dd->control | QLOGIC_IB_C_FREEZEMODE);
+
+	if (dd->cspec->ibsymdelta || dd->cspec->iblnkerrdelta ||
+	    dd->cspec->ibdeltainprog) {
+		u64 diagc;
+
+		/* enable counter writes */
+		diagc = qib_read_kreg64(dd, kr_hwdiagctrl);
+		qib_write_kreg(dd, kr_hwdiagctrl,
+			       diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable));
+
+		if (dd->cspec->ibsymdelta || dd->cspec->ibdeltainprog) {
+			val = read_6120_creg32(dd, cr_ibsymbolerr);
+			if (dd->cspec->ibdeltainprog)
+				val -= val - dd->cspec->ibsymsnap;
+			val -= dd->cspec->ibsymdelta;
+			write_6120_creg(dd, cr_ibsymbolerr, val);
+		}
+		if (dd->cspec->iblnkerrdelta || dd->cspec->ibdeltainprog) {
+			val = read_6120_creg32(dd, cr_iblinkerrrecov);
+			if (dd->cspec->ibdeltainprog)
+				val -= val - dd->cspec->iblnkerrsnap;
+			val -= dd->cspec->iblnkerrdelta;
+			write_6120_creg(dd, cr_iblinkerrrecov, val);
+		}
+
+		/* and disable counter writes */
+		qib_write_kreg(dd, kr_hwdiagctrl, diagc);
+	}
+
+	val = qib_read_kreg64(dd, kr_serdes_cfg0);
+	val |= SYM_MASK(SerdesCfg0, TxIdeEnX);
+	qib_write_kreg(dd, kr_serdes_cfg0, val);
+}
+
+/**
+ * qib_6120_setup_setextled - set the state of the two external LEDs
+ * @ppd: the qlogic_ib device
+ * @on: whether the link is up or not
+ *
+ * The exact combo of LEDs if on is true is determined by looking
+ * at the ibcstatus.
+ * These LEDs indicate the physical and logical state of IB link.
+ * For this chip (at least with recommended board pinouts), LED1
+ * is Yellow (logical state) and LED2 is Green (physical state),
+ *
+ * Note:  We try to match the Mellanox HCA LED behavior as best
+ * we can.  Green indicates physical link state is OK (something is
+ * plugged in, and we can train).
+ * Amber indicates the link is logically up (ACTIVE).
+ * Mellanox further blinks the amber LED to indicate data packet
+ * activity, but we have no hardware support for that, so it would
+ * require waking up every 10-20 msecs and checking the counters
+ * on the chip, and then turning the LED off if appropriate.  That's
+ * visible overhead, so not something we will do.
+ *
+ */
+static void qib_6120_setup_setextled(struct qib_pportdata *ppd, u32 on)
+{
+	u64 extctl, val, lst, ltst;
+	unsigned long flags;
+	struct qib_devdata *dd = ppd->dd;
+
+	/*
+	 * The diags use the LED to indicate diag info, so we leave
+	 * the external LED alone when the diags are running.
+	 */
+	if (dd->diag_client)
+		return;
+
+	/* Allow override of LED display for, e.g. Locating system in rack */
+	if (ppd->led_override) {
+		ltst = (ppd->led_override & QIB_LED_PHYS) ?
+			IB_PHYSPORTSTATE_LINKUP : IB_PHYSPORTSTATE_DISABLED,
+		lst = (ppd->led_override & QIB_LED_LOG) ?
+			IB_PORT_ACTIVE : IB_PORT_DOWN;
+	} else if (on) {
+		val = qib_read_kreg64(dd, kr_ibcstatus);
+		ltst = qib_6120_phys_portstate(val);
+		lst = qib_6120_iblink_state(val);
+	} else {
+		ltst = 0;
+		lst = 0;
+	}
+
+	spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+	extctl = dd->cspec->extctrl & ~(SYM_MASK(EXTCtrl, LEDPriPortGreenOn) |
+				 SYM_MASK(EXTCtrl, LEDPriPortYellowOn));
+
+	if (ltst == IB_PHYSPORTSTATE_LINKUP)
+		extctl |= SYM_MASK(EXTCtrl, LEDPriPortYellowOn);
+	if (lst == IB_PORT_ACTIVE)
+		extctl |= SYM_MASK(EXTCtrl, LEDPriPortGreenOn);
+	dd->cspec->extctrl = extctl;
+	qib_write_kreg(dd, kr_extctrl, extctl);
+	spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+}
+
+/**
+ * qib_6120_setup_cleanup - clean up any per-chip chip-specific stuff
+ * @dd: the qlogic_ib device
+ *
+ * This is called during driver unload.
+*/
+static void qib_6120_setup_cleanup(struct qib_devdata *dd)
+{
+	qib_free_irq(dd);
+	kfree(dd->cspec->cntrs);
+	kfree(dd->cspec->portcntrs);
+	if (dd->cspec->dummy_hdrq) {
+		dma_free_coherent(&dd->pcidev->dev,
+				  ALIGN(dd->rcvhdrcnt *
+					dd->rcvhdrentsize *
+					sizeof(u32), PAGE_SIZE),
+				  dd->cspec->dummy_hdrq,
+				  dd->cspec->dummy_hdrq_phys);
+		dd->cspec->dummy_hdrq = NULL;
+	}
+}
+
+static void qib_wantpiobuf_6120_intr(struct qib_devdata *dd, u32 needint)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dd->sendctrl_lock, flags);
+	if (needint)
+		dd->sendctrl |= SYM_MASK(SendCtrl, PIOIntBufAvail);
+	else
+		dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOIntBufAvail);
+	qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
+	qib_write_kreg(dd, kr_scratch, 0ULL);
+	spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+}
+
+/*
+ * handle errors and unusual events first, separate function
+ * to improve cache hits for fast path interrupt handling
+ */
+static noinline void unlikely_6120_intr(struct qib_devdata *dd, u64 istat)
+{
+	if (unlikely(istat & ~QLOGIC_IB_I_BITSEXTANT))
+		qib_dev_err(dd, "interrupt with unknown interrupts %Lx set\n",
+			    istat & ~QLOGIC_IB_I_BITSEXTANT);
+
+	if (istat & QLOGIC_IB_I_ERROR) {
+		u64 estat = 0;
+
+		qib_stats.sps_errints++;
+		estat = qib_read_kreg64(dd, kr_errstatus);
+		if (!estat)
+			qib_devinfo(dd->pcidev,
+				"error interrupt (%Lx), but no error bits set!\n",
+				istat);
+		handle_6120_errors(dd, estat);
+	}
+
+	if (istat & QLOGIC_IB_I_GPIO) {
+		u32 gpiostatus;
+		u32 to_clear = 0;
+
+		/*
+		 * GPIO_3..5 on IBA6120 Rev2 chips indicate
+		 * errors that we need to count.
+		 */
+		gpiostatus = qib_read_kreg32(dd, kr_gpio_status);
+		/* First the error-counter case. */
+		if (gpiostatus & GPIO_ERRINTR_MASK) {
+			/* want to clear the bits we see asserted. */
+			to_clear |= (gpiostatus & GPIO_ERRINTR_MASK);
+
+			/*
+			 * Count appropriately, clear bits out of our copy,
+			 * as they have been "handled".
+			 */
+			if (gpiostatus & (1 << GPIO_RXUVL_BIT))
+				dd->cspec->rxfc_unsupvl_errs++;
+			if (gpiostatus & (1 << GPIO_OVRUN_BIT))
+				dd->cspec->overrun_thresh_errs++;
+			if (gpiostatus & (1 << GPIO_LLI_BIT))
+				dd->cspec->lli_errs++;
+			gpiostatus &= ~GPIO_ERRINTR_MASK;
+		}
+		if (gpiostatus) {
+			/*
+			 * Some unexpected bits remain. If they could have
+			 * caused the interrupt, complain and clear.
+			 * To avoid repetition of this condition, also clear
+			 * the mask. It is almost certainly due to error.
+			 */
+			const u32 mask = qib_read_kreg32(dd, kr_gpio_mask);
+
+			/*
+			 * Also check that the chip reflects our shadow,
+			 * and report issues, If they caused the interrupt.
+			 * we will suppress by refreshing from the shadow.
+			 */
+			if (mask & gpiostatus) {
+				to_clear |= (gpiostatus & mask);
+				dd->cspec->gpio_mask &= ~(gpiostatus & mask);
+				qib_write_kreg(dd, kr_gpio_mask,
+					       dd->cspec->gpio_mask);
+			}
+		}
+		if (to_clear)
+			qib_write_kreg(dd, kr_gpio_clear, (u64) to_clear);
+	}
+}
+
+static irqreturn_t qib_6120intr(int irq, void *data)
+{
+	struct qib_devdata *dd = data;
+	irqreturn_t ret;
+	u32 istat, ctxtrbits, rmask, crcs = 0;
+	unsigned i;
+
+	if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) {
+		/*
+		 * This return value is not great, but we do not want the
+		 * interrupt core code to remove our interrupt handler
+		 * because we don't appear to be handling an interrupt
+		 * during a chip reset.
+		 */
+		ret = IRQ_HANDLED;
+		goto bail;
+	}
+
+	istat = qib_read_kreg32(dd, kr_intstatus);
+
+	if (unlikely(!istat)) {
+		ret = IRQ_NONE; /* not our interrupt, or already handled */
+		goto bail;
+	}
+	if (unlikely(istat == -1)) {
+		qib_bad_intrstatus(dd);
+		/* don't know if it was our interrupt or not */
+		ret = IRQ_NONE;
+		goto bail;
+	}
+
+	this_cpu_inc(*dd->int_counter);
+
+	if (unlikely(istat & (~QLOGIC_IB_I_BITSEXTANT |
+			      QLOGIC_IB_I_GPIO | QLOGIC_IB_I_ERROR)))
+		unlikely_6120_intr(dd, istat);
+
+	/*
+	 * Clear the interrupt bits we found set, relatively early, so we
+	 * "know" know the chip will have seen this by the time we process
+	 * the queue, and will re-interrupt if necessary.  The processor
+	 * itself won't take the interrupt again until we return.
+	 */
+	qib_write_kreg(dd, kr_intclear, istat);
+
+	/*
+	 * Handle kernel receive queues before checking for pio buffers
+	 * available since receives can overflow; piobuf waiters can afford
+	 * a few extra cycles, since they were waiting anyway.
+	 */
+	ctxtrbits = istat &
+		((QLOGIC_IB_I_RCVAVAIL_MASK << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
+		 (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT));
+	if (ctxtrbits) {
+		rmask = (1U << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
+			(1U << QLOGIC_IB_I_RCVURG_SHIFT);
+		for (i = 0; i < dd->first_user_ctxt; i++) {
+			if (ctxtrbits & rmask) {
+				ctxtrbits &= ~rmask;
+				crcs += qib_kreceive(dd->rcd[i],
+						     &dd->cspec->lli_counter,
+						     NULL);
+			}
+			rmask <<= 1;
+		}
+		if (crcs) {
+			u32 cntr = dd->cspec->lli_counter;
+
+			cntr += crcs;
+			if (cntr) {
+				if (cntr > dd->cspec->lli_thresh) {
+					dd->cspec->lli_counter = 0;
+					dd->cspec->lli_errs++;
+				} else
+					dd->cspec->lli_counter += cntr;
+			}
+		}
+
+
+		if (ctxtrbits) {
+			ctxtrbits =
+				(ctxtrbits >> QLOGIC_IB_I_RCVAVAIL_SHIFT) |
+				(ctxtrbits >> QLOGIC_IB_I_RCVURG_SHIFT);
+			qib_handle_urcv(dd, ctxtrbits);
+		}
+	}
+
+	if ((istat & QLOGIC_IB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED))
+		qib_ib_piobufavail(dd);
+
+	ret = IRQ_HANDLED;
+bail:
+	return ret;
+}
+
+/*
+ * Set up our chip-specific interrupt handler
+ * The interrupt type has already been setup, so
+ * we just need to do the registration and error checking.
+ */
+static void qib_setup_6120_interrupt(struct qib_devdata *dd)
+{
+	int ret;
+
+	/*
+	 * If the chip supports added error indication via GPIO pins,
+	 * enable interrupts on those bits so the interrupt routine
+	 * can count the events. Also set flag so interrupt routine
+	 * can know they are expected.
+	 */
+	if (SYM_FIELD(dd->revision, Revision_R,
+		      ChipRevMinor) > 1) {
+		/* Rev2+ reports extra errors via internal GPIO pins */
+		dd->cspec->gpio_mask |= GPIO_ERRINTR_MASK;
+		qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
+	}
+
+	ret = pci_request_irq(dd->pcidev, 0, qib_6120intr, NULL, dd,
+			      QIB_DRV_NAME);
+	if (ret)
+		qib_dev_err(dd,
+			    "Couldn't setup interrupt (irq=%d): %d\n",
+			    pci_irq_vector(dd->pcidev, 0), ret);
+}
+
+/**
+ * pe_boardname - fill in the board name
+ * @dd: the qlogic_ib device
+ *
+ * info is based on the board revision register
+ */
+static void pe_boardname(struct qib_devdata *dd)
+{
+	u32 boardid;
+
+	boardid = SYM_FIELD(dd->revision, Revision,
+			    BoardID);
+
+	switch (boardid) {
+	case 2:
+		dd->boardname = "InfiniPath_QLE7140";
+		break;
+	default:
+		qib_dev_err(dd, "Unknown 6120 board with ID %u\n", boardid);
+		dd->boardname = "Unknown_InfiniPath_6120";
+		break;
+	}
+
+	if (dd->majrev != 4 || !dd->minrev || dd->minrev > 2)
+		qib_dev_err(dd,
+			    "Unsupported InfiniPath hardware revision %u.%u!\n",
+			    dd->majrev, dd->minrev);
+
+	snprintf(dd->boardversion, sizeof(dd->boardversion),
+		 "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
+		 QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname,
+		 (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch),
+		 dd->majrev, dd->minrev,
+		 (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW));
+}
+
+/*
+ * This routine sleeps, so it can only be called from user context, not
+ * from interrupt context.  If we need interrupt context, we can split
+ * it into two routines.
+ */
+static int qib_6120_setup_reset(struct qib_devdata *dd)
+{
+	u64 val;
+	int i;
+	int ret;
+	u16 cmdval;
+	u8 int_line, clinesz;
+
+	qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz);
+
+	/* Use ERROR so it shows up in logs, etc. */
+	qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit);
+
+	/* no interrupts till re-initted */
+	qib_6120_set_intr_state(dd, 0);
+
+	dd->cspec->ibdeltainprog = 0;
+	dd->cspec->ibsymdelta = 0;
+	dd->cspec->iblnkerrdelta = 0;
+
+	/*
+	 * Keep chip from being accessed until we are ready.  Use
+	 * writeq() directly, to allow the write even though QIB_PRESENT
+	 * isn't set.
+	 */
+	dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
+	/* so we check interrupts work again */
+	dd->z_int_counter = qib_int_counter(dd);
+	val = dd->control | QLOGIC_IB_C_RESET;
+	writeq(val, &dd->kregbase[kr_control]);
+	mb(); /* prevent compiler re-ordering around actual reset */
+
+	for (i = 1; i <= 5; i++) {
+		/*
+		 * Allow MBIST, etc. to complete; longer on each retry.
+		 * We sometimes get machine checks from bus timeout if no
+		 * response, so for now, make it *really* long.
+		 */
+		msleep(1000 + (1 + i) * 2000);
+
+		qib_pcie_reenable(dd, cmdval, int_line, clinesz);
+
+		/*
+		 * Use readq directly, so we don't need to mark it as PRESENT
+		 * until we get a successful indication that all is well.
+		 */
+		val = readq(&dd->kregbase[kr_revision]);
+		if (val == dd->revision) {
+			dd->flags |= QIB_PRESENT; /* it's back */
+			ret = qib_reinit_intr(dd);
+			goto bail;
+		}
+	}
+	ret = 0; /* failed */
+
+bail:
+	if (ret) {
+		if (qib_pcie_params(dd, dd->lbus_width, NULL))
+			qib_dev_err(dd,
+				"Reset failed to setup PCIe or interrupts; continuing anyway\n");
+		/* clear the reset error, init error/hwerror mask */
+		qib_6120_init_hwerrors(dd);
+		/* for Rev2 error interrupts; nop for rev 1 */
+		qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
+		/* clear the reset error, init error/hwerror mask */
+		qib_6120_init_hwerrors(dd);
+	}
+	return ret;
+}
+
+/**
+ * qib_6120_put_tid - write a TID in chip
+ * @dd: the qlogic_ib device
+ * @tidptr: pointer to the expected TID (in chip) to update
+ * @type: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0)
+ * for expected
+ * @pa: physical address of in memory buffer; tidinvalid if freeing
+ *
+ * This exists as a separate routine to allow for special locking etc.
+ * It's used for both the full cleanup on exit, as well as the normal
+ * setup and teardown.
+ */
+static void qib_6120_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr,
+			     u32 type, unsigned long pa)
+{
+	u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
+	unsigned long flags;
+	int tidx;
+	spinlock_t *tidlockp; /* select appropriate spinlock */
+
+	if (!dd->kregbase)
+		return;
+
+	if (pa != dd->tidinvalid) {
+		if (pa & ((1U << 11) - 1)) {
+			qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
+				    pa);
+			return;
+		}
+		pa >>= 11;
+		if (pa & ~QLOGIC_IB_RT_ADDR_MASK) {
+			qib_dev_err(dd,
+				"Physical page address 0x%lx larger than supported\n",
+				pa);
+			return;
+		}
+
+		if (type == RCVHQ_RCV_TYPE_EAGER)
+			pa |= dd->tidtemplate;
+		else /* for now, always full 4KB page */
+			pa |= 2 << 29;
+	}
+
+	/*
+	 * Avoid chip issue by writing the scratch register
+	 * before and after the TID, and with an io write barrier.
+	 * We use a spinlock around the writes, so they can't intermix
+	 * with other TID (eager or expected) writes (the chip problem
+	 * is triggered by back to back TID writes). Unfortunately, this
+	 * call can be done from interrupt level for the ctxt 0 eager TIDs,
+	 * so we have to use irqsave locks.
+	 */
+	/*
+	 * Assumes tidptr always > egrtidbase
+	 * if type == RCVHQ_RCV_TYPE_EAGER.
+	 */
+	tidx = tidptr - dd->egrtidbase;
+
+	tidlockp = (type == RCVHQ_RCV_TYPE_EAGER && tidx < dd->rcvhdrcnt)
+		? &dd->cspec->kernel_tid_lock : &dd->cspec->user_tid_lock;
+	spin_lock_irqsave(tidlockp, flags);
+	qib_write_kreg(dd, kr_scratch, 0xfeeddeaf);
+	writel(pa, tidp32);
+	qib_write_kreg(dd, kr_scratch, 0xdeadbeef);
+	spin_unlock_irqrestore(tidlockp, flags);
+}
+
+/**
+ * qib_6120_put_tid_2 - write a TID in chip, Revision 2 or higher
+ * @dd: the qlogic_ib device
+ * @tidptr: pointer to the expected TID (in chip) to update
+ * @type: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0)
+ * for expected
+ * @pa: physical address of in memory buffer; tidinvalid if freeing
+ *
+ * This exists as a separate routine to allow for selection of the
+ * appropriate "flavor". The static calls in cleanup just use the
+ * revision-agnostic form, as they are not performance critical.
+ */
+static void qib_6120_put_tid_2(struct qib_devdata *dd, u64 __iomem *tidptr,
+			       u32 type, unsigned long pa)
+{
+	u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
+
+	if (!dd->kregbase)
+		return;
+
+	if (pa != dd->tidinvalid) {
+		if (pa & ((1U << 11) - 1)) {
+			qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
+				    pa);
+			return;
+		}
+		pa >>= 11;
+		if (pa & ~QLOGIC_IB_RT_ADDR_MASK) {
+			qib_dev_err(dd,
+				"Physical page address 0x%lx larger than supported\n",
+				pa);
+			return;
+		}
+
+		if (type == RCVHQ_RCV_TYPE_EAGER)
+			pa |= dd->tidtemplate;
+		else /* for now, always full 4KB page */
+			pa |= 2 << 29;
+	}
+	writel(pa, tidp32);
+}
+
+
+/**
+ * qib_6120_clear_tids - clear all TID entries for a context, expected and eager
+ * @dd: the qlogic_ib device
+ * @rcd: the context
+ *
+ * clear all TID entries for a context, expected and eager.
+ * Used from qib_close().  On this chip, TIDs are only 32 bits,
+ * not 64, but they are still on 64 bit boundaries, so tidbase
+ * is declared as u64 * for the pointer math, even though we write 32 bits
+ */
+static void qib_6120_clear_tids(struct qib_devdata *dd,
+				struct qib_ctxtdata *rcd)
+{
+	u64 __iomem *tidbase;
+	unsigned long tidinv;
+	u32 ctxt;
+	int i;
+
+	if (!dd->kregbase || !rcd)
+		return;
+
+	ctxt = rcd->ctxt;
+
+	tidinv = dd->tidinvalid;
+	tidbase = (u64 __iomem *)
+		((char __iomem *)(dd->kregbase) +
+		 dd->rcvtidbase +
+		 ctxt * dd->rcvtidcnt * sizeof(*tidbase));
+
+	for (i = 0; i < dd->rcvtidcnt; i++)
+		/* use func pointer because could be one of two funcs */
+		dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
+				  tidinv);
+
+	tidbase = (u64 __iomem *)
+		((char __iomem *)(dd->kregbase) +
+		 dd->rcvegrbase +
+		 rcd->rcvegr_tid_base * sizeof(*tidbase));
+
+	for (i = 0; i < rcd->rcvegrcnt; i++)
+		/* use func pointer because could be one of two funcs */
+		dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
+				  tidinv);
+}
+
+/**
+ * qib_6120_tidtemplate - setup constants for TID updates
+ * @dd: the qlogic_ib device
+ *
+ * We setup stuff that we use a lot, to avoid calculating each time
+ */
+static void qib_6120_tidtemplate(struct qib_devdata *dd)
+{
+	u32 egrsize = dd->rcvegrbufsize;
+
+	/*
+	 * For now, we always allocate 4KB buffers (at init) so we can
+	 * receive max size packets.  We may want a module parameter to
+	 * specify 2KB or 4KB and/or make be per ctxt instead of per device
+	 * for those who want to reduce memory footprint.  Note that the
+	 * rcvhdrentsize size must be large enough to hold the largest
+	 * IB header (currently 96 bytes) that we expect to handle (plus of
+	 * course the 2 dwords of RHF).
+	 */
+	if (egrsize == 2048)
+		dd->tidtemplate = 1U << 29;
+	else if (egrsize == 4096)
+		dd->tidtemplate = 2U << 29;
+	dd->tidinvalid = 0;
+}
+
+int __attribute__((weak)) qib_unordered_wc(void)
+{
+	return 0;
+}
+
+/**
+ * qib_6120_get_base_info - set chip-specific flags for user code
+ * @rcd: the qlogic_ib ctxt
+ * @kinfo: qib_base_info pointer
+ *
+ * We set the PCIE flag because the lower bandwidth on PCIe vs
+ * HyperTransport can affect some user packet algorithms.
+ */
+static int qib_6120_get_base_info(struct qib_ctxtdata *rcd,
+				  struct qib_base_info *kinfo)
+{
+	if (qib_unordered_wc())
+		kinfo->spi_runtime_flags |= QIB_RUNTIME_FORCE_WC_ORDER;
+
+	kinfo->spi_runtime_flags |= QIB_RUNTIME_PCIE |
+		QIB_RUNTIME_FORCE_PIOAVAIL | QIB_RUNTIME_PIO_REGSWAPPED;
+	return 0;
+}
+
+
+static struct qib_message_header *
+qib_6120_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr)
+{
+	return (struct qib_message_header *)
+		&rhf_addr[sizeof(u64) / sizeof(u32)];
+}
+
+static void qib_6120_config_ctxts(struct qib_devdata *dd)
+{
+	dd->ctxtcnt = qib_read_kreg32(dd, kr_portcnt);
+	if (qib_n_krcv_queues > 1) {
+		dd->first_user_ctxt = qib_n_krcv_queues * dd->num_pports;
+		if (dd->first_user_ctxt > dd->ctxtcnt)
+			dd->first_user_ctxt = dd->ctxtcnt;
+		dd->qpn_mask = dd->first_user_ctxt <= 2 ? 2 : 6;
+	} else
+		dd->first_user_ctxt = dd->num_pports;
+	dd->n_krcv_queues = dd->first_user_ctxt;
+}
+
+static void qib_update_6120_usrhead(struct qib_ctxtdata *rcd, u64 hd,
+				    u32 updegr, u32 egrhd, u32 npkts)
+{
+	if (updegr)
+		qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
+	qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
+}
+
+static u32 qib_6120_hdrqempty(struct qib_ctxtdata *rcd)
+{
+	u32 head, tail;
+
+	head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt);
+	if (rcd->rcvhdrtail_kvaddr)
+		tail = qib_get_rcvhdrtail(rcd);
+	else
+		tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt);
+	return head == tail;
+}
+
+/*
+ * Used when we close any ctxt, for DMA already in flight
+ * at close.  Can't be done until we know hdrq size, so not
+ * early in chip init.
+ */
+static void alloc_dummy_hdrq(struct qib_devdata *dd)
+{
+	dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev,
+					dd->rcd[0]->rcvhdrq_size,
+					&dd->cspec->dummy_hdrq_phys,
+					GFP_ATOMIC | __GFP_COMP);
+	if (!dd->cspec->dummy_hdrq) {
+		qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n");
+		/* fallback to just 0'ing */
+		dd->cspec->dummy_hdrq_phys = 0UL;
+	}
+}
+
+/*
+ * Modify the RCVCTRL register in chip-specific way. This
+ * is a function because bit positions and (future) register
+ * location is chip-specific, but the needed operations are
+ * generic. <op> is a bit-mask because we often want to
+ * do multiple modifications.
+ */
+static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op,
+			     int ctxt)
+{
+	struct qib_devdata *dd = ppd->dd;
+	u64 mask, val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
+
+	if (op & QIB_RCVCTRL_TAILUPD_ENB)
+		dd->rcvctrl |= (1ULL << QLOGIC_IB_R_TAILUPD_SHIFT);
+	if (op & QIB_RCVCTRL_TAILUPD_DIS)
+		dd->rcvctrl &= ~(1ULL << QLOGIC_IB_R_TAILUPD_SHIFT);
+	if (op & QIB_RCVCTRL_PKEY_ENB)
+		dd->rcvctrl &= ~(1ULL << IBA6120_R_PKEY_DIS_SHIFT);
+	if (op & QIB_RCVCTRL_PKEY_DIS)
+		dd->rcvctrl |= (1ULL << IBA6120_R_PKEY_DIS_SHIFT);
+	if (ctxt < 0)
+		mask = (1ULL << dd->ctxtcnt) - 1;
+	else
+		mask = (1ULL << ctxt);
+	if (op & QIB_RCVCTRL_CTXT_ENB) {
+		/* always done for specific ctxt */
+		dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, PortEnable));
+		if (!(dd->flags & QIB_NODMA_RTAIL))
+			dd->rcvctrl |= 1ULL << QLOGIC_IB_R_TAILUPD_SHIFT;
+		/* Write these registers before the context is enabled. */
+		qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt,
+			dd->rcd[ctxt]->rcvhdrqtailaddr_phys);
+		qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt,
+			dd->rcd[ctxt]->rcvhdrq_phys);
+
+		if (ctxt == 0 && !dd->cspec->dummy_hdrq)
+			alloc_dummy_hdrq(dd);
+	}
+	if (op & QIB_RCVCTRL_CTXT_DIS)
+		dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, PortEnable));
+	if (op & QIB_RCVCTRL_INTRAVAIL_ENB)
+		dd->rcvctrl |= (mask << QLOGIC_IB_R_INTRAVAIL_SHIFT);
+	if (op & QIB_RCVCTRL_INTRAVAIL_DIS)
+		dd->rcvctrl &= ~(mask << QLOGIC_IB_R_INTRAVAIL_SHIFT);
+	qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
+	if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rhdrhead_intr_off) {
+		/* arm rcv interrupt */
+		val = qib_read_ureg32(dd, ur_rcvhdrhead, ctxt) |
+			dd->rhdrhead_intr_off;
+		qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
+	}
+	if (op & QIB_RCVCTRL_CTXT_ENB) {
+		/*
+		 * Init the context registers also; if we were
+		 * disabled, tail and head should both be zero
+		 * already from the enable, but since we don't
+		 * know, we have to do it explicitly.
+		 */
+		val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
+		qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
+
+		val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt);
+		dd->rcd[ctxt]->head = val;
+		/* If kctxt, interrupt on next receive. */
+		if (ctxt < dd->first_user_ctxt)
+			val |= dd->rhdrhead_intr_off;
+		qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
+	}
+	if (op & QIB_RCVCTRL_CTXT_DIS) {
+		/*
+		 * Be paranoid, and never write 0's to these, just use an
+		 * unused page.  Of course,
+		 * rcvhdraddr points to a large chunk of memory, so this
+		 * could still trash things, but at least it won't trash
+		 * page 0, and by disabling the ctxt, it should stop "soon",
+		 * even if a packet or two is in already in flight after we
+		 * disabled the ctxt.  Only 6120 has this issue.
+		 */
+		if (ctxt >= 0) {
+			qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt,
+					    dd->cspec->dummy_hdrq_phys);
+			qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt,
+					    dd->cspec->dummy_hdrq_phys);
+		} else {
+			unsigned i;
+
+			for (i = 0; i < dd->cfgctxts; i++) {
+				qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr,
+					    i, dd->cspec->dummy_hdrq_phys);
+				qib_write_kreg_ctxt(dd, kr_rcvhdraddr,
+					    i, dd->cspec->dummy_hdrq_phys);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
+}
+
+/*
+ * Modify the SENDCTRL register in chip-specific way. This
+ * is a function there may be multiple such registers with
+ * slightly different layouts. Only operations actually used
+ * are implemented yet.
+ * Chip requires no back-back sendctrl writes, so write
+ * scratch register after writing sendctrl
+ */
+static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op)
+{
+	struct qib_devdata *dd = ppd->dd;
+	u64 tmp_dd_sendctrl;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dd->sendctrl_lock, flags);
+
+	/* First the ones that are "sticky", saved in shadow */
+	if (op & QIB_SENDCTRL_CLEAR)
+		dd->sendctrl = 0;
+	if (op & QIB_SENDCTRL_SEND_DIS)
+		dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOEnable);
+	else if (op & QIB_SENDCTRL_SEND_ENB)
+		dd->sendctrl |= SYM_MASK(SendCtrl, PIOEnable);
+	if (op & QIB_SENDCTRL_AVAIL_DIS)
+		dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd);
+	else if (op & QIB_SENDCTRL_AVAIL_ENB)
+		dd->sendctrl |= SYM_MASK(SendCtrl, PIOBufAvailUpd);
+
+	if (op & QIB_SENDCTRL_DISARM_ALL) {
+		u32 i, last;
+
+		tmp_dd_sendctrl = dd->sendctrl;
+		/*
+		 * disarm any that are not yet launched, disabling sends
+		 * and updates until done.
+		 */
+		last = dd->piobcnt2k + dd->piobcnt4k;
+		tmp_dd_sendctrl &=
+			~(SYM_MASK(SendCtrl, PIOEnable) |
+			  SYM_MASK(SendCtrl, PIOBufAvailUpd));
+		for (i = 0; i < last; i++) {
+			qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl |
+				       SYM_MASK(SendCtrl, Disarm) | i);
+			qib_write_kreg(dd, kr_scratch, 0);
+		}
+	}
+
+	tmp_dd_sendctrl = dd->sendctrl;
+
+	if (op & QIB_SENDCTRL_FLUSH)
+		tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Abort);
+	if (op & QIB_SENDCTRL_DISARM)
+		tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) |
+			((op & QIB_6120_SendCtrl_DisarmPIOBuf_RMASK) <<
+			 SYM_LSB(SendCtrl, DisarmPIOBuf));
+	if (op & QIB_SENDCTRL_AVAIL_BLIP)
+		tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd);
+
+	qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl);
+	qib_write_kreg(dd, kr_scratch, 0);
+
+	if (op & QIB_SENDCTRL_AVAIL_BLIP) {
+		qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
+		qib_write_kreg(dd, kr_scratch, 0);
+	}
+
+	spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
+
+	if (op & QIB_SENDCTRL_FLUSH) {
+		u32 v;
+		/*
+		 * ensure writes have hit chip, then do a few
+		 * more reads, to allow DMA of pioavail registers
+		 * to occur, so in-memory copy is in sync with
+		 * the chip.  Not always safe to sleep.
+		 */
+		v = qib_read_kreg32(dd, kr_scratch);
+		qib_write_kreg(dd, kr_scratch, v);
+		v = qib_read_kreg32(dd, kr_scratch);
+		qib_write_kreg(dd, kr_scratch, v);
+		qib_read_kreg32(dd, kr_scratch);
+	}
+}
+
+/**
+ * qib_portcntr_6120 - read a per-port counter
+ * @ppd: the qlogic_ib device
+ * @reg: the counter to snapshot
+ */
+static u64 qib_portcntr_6120(struct qib_pportdata *ppd, u32 reg)
+{
+	u64 ret = 0ULL;
+	struct qib_devdata *dd = ppd->dd;
+	u16 creg;
+	/* 0xffff for unimplemented or synthesized counters */
+	static const u16 xlator[] = {
+		[QIBPORTCNTR_PKTSEND] = cr_pktsend,
+		[QIBPORTCNTR_WORDSEND] = cr_wordsend,
+		[QIBPORTCNTR_PSXMITDATA] = 0xffff,
+		[QIBPORTCNTR_PSXMITPKTS] = 0xffff,
+		[QIBPORTCNTR_PSXMITWAIT] = 0xffff,
+		[QIBPORTCNTR_SENDSTALL] = cr_sendstall,
+		[QIBPORTCNTR_PKTRCV] = cr_pktrcv,
+		[QIBPORTCNTR_PSRCVDATA] = 0xffff,
+		[QIBPORTCNTR_PSRCVPKTS] = 0xffff,
+		[QIBPORTCNTR_RCVEBP] = cr_rcvebp,
+		[QIBPORTCNTR_RCVOVFL] = cr_rcvovfl,
+		[QIBPORTCNTR_WORDRCV] = cr_wordrcv,
+		[QIBPORTCNTR_RXDROPPKT] = cr_rxdroppkt,
+		[QIBPORTCNTR_RXLOCALPHYERR] = 0xffff,
+		[QIBPORTCNTR_RXVLERR] = 0xffff,
+		[QIBPORTCNTR_ERRICRC] = cr_erricrc,
+		[QIBPORTCNTR_ERRVCRC] = cr_errvcrc,
+		[QIBPORTCNTR_ERRLPCRC] = cr_errlpcrc,
+		[QIBPORTCNTR_BADFORMAT] = cr_badformat,
+		[QIBPORTCNTR_ERR_RLEN] = cr_err_rlen,
+		[QIBPORTCNTR_IBSYMBOLERR] = cr_ibsymbolerr,
+		[QIBPORTCNTR_INVALIDRLEN] = cr_invalidrlen,
+		[QIBPORTCNTR_UNSUPVL] = cr_txunsupvl,
+		[QIBPORTCNTR_EXCESSBUFOVFL] = 0xffff,
+		[QIBPORTCNTR_ERRLINK] = cr_errlink,
+		[QIBPORTCNTR_IBLINKDOWN] = cr_iblinkdown,
+		[QIBPORTCNTR_IBLINKERRRECOV] = cr_iblinkerrrecov,
+		[QIBPORTCNTR_LLI] = 0xffff,
+		[QIBPORTCNTR_PSINTERVAL] = 0xffff,
+		[QIBPORTCNTR_PSSTART] = 0xffff,
+		[QIBPORTCNTR_PSSTAT] = 0xffff,
+		[QIBPORTCNTR_VL15PKTDROP] = 0xffff,
+		[QIBPORTCNTR_ERRPKEY] = cr_errpkey,
+		[QIBPORTCNTR_KHDROVFL] = 0xffff,
+	};
+
+	if (reg >= ARRAY_SIZE(xlator)) {
+		qib_devinfo(ppd->dd->pcidev,
+			 "Unimplemented portcounter %u\n", reg);
+		goto done;
+	}
+	creg = xlator[reg];
+
+	/* handle counters requests not implemented as chip counters */
+	if (reg == QIBPORTCNTR_LLI)
+		ret = dd->cspec->lli_errs;
+	else if (reg == QIBPORTCNTR_EXCESSBUFOVFL)
+		ret = dd->cspec->overrun_thresh_errs;
+	else if (reg == QIBPORTCNTR_KHDROVFL) {
+		int i;
+
+		/* sum over all kernel contexts */
+		for (i = 0; i < dd->first_user_ctxt; i++)
+			ret += read_6120_creg32(dd, cr_portovfl + i);
+	} else if (reg == QIBPORTCNTR_PSSTAT)
+		ret = dd->cspec->pma_sample_status;
+	if (creg == 0xffff)
+		goto done;
+
+	/*
+	 * only fast incrementing counters are 64bit; use 32 bit reads to
+	 * avoid two independent reads when on opteron
+	 */
+	if (creg == cr_wordsend || creg == cr_wordrcv ||
+	    creg == cr_pktsend || creg == cr_pktrcv)
+		ret = read_6120_creg(dd, creg);
+	else
+		ret = read_6120_creg32(dd, creg);
+	if (creg == cr_ibsymbolerr) {
+		if (dd->cspec->ibdeltainprog)
+			ret -= ret - dd->cspec->ibsymsnap;
+		ret -= dd->cspec->ibsymdelta;
+	} else if (creg == cr_iblinkerrrecov) {
+		if (dd->cspec->ibdeltainprog)
+			ret -= ret - dd->cspec->iblnkerrsnap;
+		ret -= dd->cspec->iblnkerrdelta;
+	}
+	if (reg == QIBPORTCNTR_RXDROPPKT) /* add special cased count */
+		ret += dd->cspec->rxfc_unsupvl_errs;
+
+done:
+	return ret;
+}
+
+/*
+ * Device counter names (not port-specific), one line per stat,
+ * single string.  Used by utilities like ipathstats to print the stats
+ * in a way which works for different versions of drivers, without changing
+ * the utility.  Names need to be 12 chars or less (w/o newline), for proper
+ * display by utility.
+ * Non-error counters are first.
+ * Start of "error" conters is indicated by a leading "E " on the first
+ * "error" counter, and doesn't count in label length.
+ * The EgrOvfl list needs to be last so we truncate them at the configured
+ * context count for the device.
+ * cntr6120indices contains the corresponding register indices.
+ */
+static const char cntr6120names[] =
+	"Interrupts\n"
+	"HostBusStall\n"
+	"E RxTIDFull\n"
+	"RxTIDInvalid\n"
+	"Ctxt0EgrOvfl\n"
+	"Ctxt1EgrOvfl\n"
+	"Ctxt2EgrOvfl\n"
+	"Ctxt3EgrOvfl\n"
+	"Ctxt4EgrOvfl\n";
+
+static const size_t cntr6120indices[] = {
+	cr_lbint,
+	cr_lbflowstall,
+	cr_errtidfull,
+	cr_errtidvalid,
+	cr_portovfl + 0,
+	cr_portovfl + 1,
+	cr_portovfl + 2,
+	cr_portovfl + 3,
+	cr_portovfl + 4,
+};
+
+/*
+ * same as cntr6120names and cntr6120indices, but for port-specific counters.
+ * portcntr6120indices is somewhat complicated by some registers needing
+ * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG
+ */
+static const char portcntr6120names[] =
+	"TxPkt\n"
+	"TxFlowPkt\n"
+	"TxWords\n"
+	"RxPkt\n"
+	"RxFlowPkt\n"
+	"RxWords\n"
+	"TxFlowStall\n"
+	"E IBStatusChng\n"
+	"IBLinkDown\n"
+	"IBLnkRecov\n"
+	"IBRxLinkErr\n"
+	"IBSymbolErr\n"
+	"RxLLIErr\n"
+	"RxBadFormat\n"
+	"RxBadLen\n"
+	"RxBufOvrfl\n"
+	"RxEBP\n"
+	"RxFlowCtlErr\n"
+	"RxICRCerr\n"
+	"RxLPCRCerr\n"
+	"RxVCRCerr\n"
+	"RxInvalLen\n"
+	"RxInvalPKey\n"
+	"RxPktDropped\n"
+	"TxBadLength\n"
+	"TxDropped\n"
+	"TxInvalLen\n"
+	"TxUnderrun\n"
+	"TxUnsupVL\n"
+	;
+
+#define _PORT_VIRT_FLAG 0x8000 /* "virtual", need adjustments */
+static const size_t portcntr6120indices[] = {
+	QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG,
+	cr_pktsendflow,
+	QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG,
+	cr_pktrcvflowctrl,
+	QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG,
+	cr_ibstatuschange,
+	QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_LLI | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG,
+	cr_rcvflowctrl_err,
+	QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG,
+	QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG,
+	cr_invalidslen,
+	cr_senddropped,
+	cr_errslen,
+	cr_sendunderrun,
+	cr_txunsupvl,
+};
+
+/* do all the setup to make the counter reads efficient later */
+static void init_6120_cntrnames(struct qib_devdata *dd)
+{
+	int i, j = 0;
+	char *s;
+
+	for (i = 0, s = (char *)cntr6120names; s && j <= dd->cfgctxts;
+	     i++) {
+		/* we always have at least one counter before the egrovfl */
+		if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12))
+			j = 1;
+		s = strchr(s + 1, '\n');
+		if (s && j)
+			j++;
+	}
+	dd->cspec->ncntrs = i;
+	if (!s)
+		/* full list; size is without terminating null */
+		dd->cspec->cntrnamelen = sizeof(cntr6120names) - 1;
+	else
+		dd->cspec->cntrnamelen = 1 + s - cntr6120names;
+	dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64),
+					 GFP_KERNEL);
+
+	for (i = 0, s = (char *)portcntr6120names; s; i++)
+		s = strchr(s + 1, '\n');
+	dd->cspec->nportcntrs = i - 1;
+	dd->cspec->portcntrnamelen = sizeof(portcntr6120names) - 1;
+	dd->cspec->portcntrs = kmalloc_array(dd->cspec->nportcntrs,
+					     sizeof(u64),
+					     GFP_KERNEL);
+}
+
+static u32 qib_read_6120cntrs(struct qib_devdata *dd, loff_t pos, char **namep,
+			      u64 **cntrp)
+{
+	u32 ret;
+
+	if (namep) {
+		ret = dd->cspec->cntrnamelen;
+		if (pos >= ret)
+			ret = 0; /* final read after getting everything */
+		else
+			*namep = (char *)cntr6120names;
+	} else {
+		u64 *cntr = dd->cspec->cntrs;
+		int i;
+
+		ret = dd->cspec->ncntrs * sizeof(u64);
+		if (!cntr || pos >= ret) {
+			/* everything read, or couldn't get memory */
+			ret = 0;
+			goto done;
+		}
+		if (pos >= ret) {
+			ret = 0; /* final read after getting everything */
+			goto done;
+		}
+		*cntrp = cntr;
+		for (i = 0; i < dd->cspec->ncntrs; i++)
+			*cntr++ = read_6120_creg32(dd, cntr6120indices[i]);
+	}
+done:
+	return ret;
+}
+
+static u32 qib_read_6120portcntrs(struct qib_devdata *dd, loff_t pos, u32 port,
+				  char **namep, u64 **cntrp)
+{
+	u32 ret;
+
+	if (namep) {
+		ret = dd->cspec->portcntrnamelen;
+		if (pos >= ret)
+			ret = 0; /* final read after getting everything */
+		else
+			*namep = (char *)portcntr6120names;
+	} else {
+		u64 *cntr = dd->cspec->portcntrs;
+		struct qib_pportdata *ppd = &dd->pport[port];
+		int i;
+
+		ret = dd->cspec->nportcntrs * sizeof(u64);
+		if (!cntr || pos >= ret) {
+			/* everything read, or couldn't get memory */
+			ret = 0;
+			goto done;
+		}
+		*cntrp = cntr;
+		for (i = 0; i < dd->cspec->nportcntrs; i++) {
+			if (portcntr6120indices[i] & _PORT_VIRT_FLAG)
+				*cntr++ = qib_portcntr_6120(ppd,
+					portcntr6120indices[i] &
+					~_PORT_VIRT_FLAG);
+			else
+				*cntr++ = read_6120_creg32(dd,
+					   portcntr6120indices[i]);
+		}
+	}
+done:
+	return ret;
+}
+
+static void qib_chk_6120_errormask(struct qib_devdata *dd)
+{
+	static u32 fixed;
+	u32 ctrl;
+	unsigned long errormask;
+	unsigned long hwerrs;
+
+	if (!dd->cspec->errormask || !(dd->flags & QIB_INITTED))
+		return;
+
+	errormask = qib_read_kreg64(dd, kr_errmask);
+
+	if (errormask == dd->cspec->errormask)
+		return;
+	fixed++;
+
+	hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
+	ctrl = qib_read_kreg32(dd, kr_control);
+
+	qib_write_kreg(dd, kr_errmask,
+		dd->cspec->errormask);
+
+	if ((hwerrs & dd->cspec->hwerrmask) ||
+	    (ctrl & QLOGIC_IB_C_FREEZEMODE)) {
+		qib_write_kreg(dd, kr_hwerrclear, 0ULL);
+		qib_write_kreg(dd, kr_errclear, 0ULL);
+		/* force re-interrupt of pending events, just in case */
+		qib_write_kreg(dd, kr_intclear, 0ULL);
+		qib_devinfo(dd->pcidev,
+			 "errormask fixed(%u) %lx->%lx, ctrl %x hwerr %lx\n",
+			 fixed, errormask, (unsigned long)dd->cspec->errormask,
+			 ctrl, hwerrs);
+	}
+}
+
+/**
+ * qib_get_6120_faststats - get word counters from chip before they overflow
+ * @t: contains a pointer to the qlogic_ib device qib_devdata
+ *
+ * This needs more work; in particular, decision on whether we really
+ * need traffic_wds done the way it is
+ * called from add_timer
+ */
+static void qib_get_6120_faststats(struct timer_list *t)
+{
+	struct qib_devdata *dd = from_timer(dd, t, stats_timer);
+	struct qib_pportdata *ppd = dd->pport;
+	unsigned long flags;
+	u64 traffic_wds;
+
+	/*
+	 * don't access the chip while running diags, or memory diags can
+	 * fail
+	 */
+	if (!(dd->flags & QIB_INITTED) || dd->diag_client)
+		/* but re-arm the timer, for diags case; won't hurt other */
+		goto done;
+
+	/*
+	 * We now try to maintain an activity timer, based on traffic
+	 * exceeding a threshold, so we need to check the word-counts
+	 * even if they are 64-bit.
+	 */
+	traffic_wds = qib_portcntr_6120(ppd, cr_wordsend) +
+		qib_portcntr_6120(ppd, cr_wordrcv);
+	spin_lock_irqsave(&dd->eep_st_lock, flags);
+	traffic_wds -= dd->traffic_wds;
+	dd->traffic_wds += traffic_wds;
+	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
+
+	qib_chk_6120_errormask(dd);
+done:
+	mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
+}
+
+/* no interrupt fallback for these chips */
+static int qib_6120_nointr_fallback(struct qib_devdata *dd)
+{
+	return 0;
+}
+
+/*
+ * reset the XGXS (between serdes and IBC).  Slightly less intrusive
+ * than resetting the IBC or external link state, and useful in some
+ * cases to cause some retraining.  To do this right, we reset IBC
+ * as well.
+ */
+static void qib_6120_xgxs_reset(struct qib_pportdata *ppd)
+{
+	u64 val, prev_val;
+	struct qib_devdata *dd = ppd->dd;
+
+	prev_val = qib_read_kreg64(dd, kr_xgxs_cfg);
+	val = prev_val | QLOGIC_IB_XGXS_RESET;
+	prev_val &= ~QLOGIC_IB_XGXS_RESET; /* be sure */
+	qib_write_kreg(dd, kr_control,
+		       dd->control & ~QLOGIC_IB_C_LINKENABLE);
+	qib_write_kreg(dd, kr_xgxs_cfg, val);
+	qib_read_kreg32(dd, kr_scratch);
+	qib_write_kreg(dd, kr_xgxs_cfg, prev_val);
+	qib_write_kreg(dd, kr_control, dd->control);
+}
+
+static int qib_6120_get_ib_cfg(struct qib_pportdata *ppd, int which)
+{
+	int ret;
+
+	switch (which) {
+	case QIB_IB_CFG_LWID:
+		ret = ppd->link_width_active;
+		break;
+
+	case QIB_IB_CFG_SPD:
+		ret = ppd->link_speed_active;
+		break;
+
+	case QIB_IB_CFG_LWID_ENB:
+		ret = ppd->link_width_enabled;
+		break;
+
+	case QIB_IB_CFG_SPD_ENB:
+		ret = ppd->link_speed_enabled;
+		break;
+
+	case QIB_IB_CFG_OP_VLS:
+		ret = ppd->vls_operational;
+		break;
+
+	case QIB_IB_CFG_VL_HIGH_CAP:
+		ret = 0;
+		break;
+
+	case QIB_IB_CFG_VL_LOW_CAP:
+		ret = 0;
+		break;
+
+	case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
+		ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl,
+				OverrunThreshold);
+		break;
+
+	case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
+		ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl,
+				PhyerrThreshold);
+		break;
+
+	case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
+		/* will only take effect when the link state changes */
+		ret = (ppd->dd->cspec->ibcctrl &
+		       SYM_MASK(IBCCtrl, LinkDownDefaultState)) ?
+			IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL;
+		break;
+
+	case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
+		ret = 0; /* no heartbeat on this chip */
+		break;
+
+	case QIB_IB_CFG_PMA_TICKS:
+		ret = 250; /* 1 usec. */
+		break;
+
+	default:
+		ret =  -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/*
+ * We assume range checking is already done, if needed.
+ */
+static int qib_6120_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
+{
+	struct qib_devdata *dd = ppd->dd;
+	int ret = 0;
+	u64 val64;
+	u16 lcmd, licmd;
+
+	switch (which) {
+	case QIB_IB_CFG_LWID_ENB:
+		ppd->link_width_enabled = val;
+		break;
+
+	case QIB_IB_CFG_SPD_ENB:
+		ppd->link_speed_enabled = val;
+		break;
+
+	case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
+		val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl,
+				  OverrunThreshold);
+		if (val64 != val) {
+			dd->cspec->ibcctrl &=
+				~SYM_MASK(IBCCtrl, OverrunThreshold);
+			dd->cspec->ibcctrl |= (u64) val <<
+				SYM_LSB(IBCCtrl, OverrunThreshold);
+			qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
+			qib_write_kreg(dd, kr_scratch, 0);
+		}
+		break;
+
+	case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
+		val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl,
+				  PhyerrThreshold);
+		if (val64 != val) {
+			dd->cspec->ibcctrl &=
+				~SYM_MASK(IBCCtrl, PhyerrThreshold);
+			dd->cspec->ibcctrl |= (u64) val <<
+				SYM_LSB(IBCCtrl, PhyerrThreshold);
+			qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
+			qib_write_kreg(dd, kr_scratch, 0);
+		}
+		break;
+
+	case QIB_IB_CFG_PKEYS: /* update pkeys */
+		val64 = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) |
+			((u64) ppd->pkeys[2] << 32) |
+			((u64) ppd->pkeys[3] << 48);
+		qib_write_kreg(dd, kr_partitionkey, val64);
+		break;
+
+	case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
+		/* will only take effect when the link state changes */
+		if (val == IB_LINKINITCMD_POLL)
+			dd->cspec->ibcctrl &=
+				~SYM_MASK(IBCCtrl, LinkDownDefaultState);
+		else /* SLEEP */
+			dd->cspec->ibcctrl |=
+				SYM_MASK(IBCCtrl, LinkDownDefaultState);
+		qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
+		qib_write_kreg(dd, kr_scratch, 0);
+		break;
+
+	case QIB_IB_CFG_MTU: /* update the MTU in IBC */
+		/*
+		 * Update our housekeeping variables, and set IBC max
+		 * size, same as init code; max IBC is max we allow in
+		 * buffer, less the qword pbc, plus 1 for ICRC, in dwords
+		 * Set even if it's unchanged, print debug message only
+		 * on changes.
+		 */
+		val = (ppd->ibmaxlen >> 2) + 1;
+		dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, MaxPktLen);
+		dd->cspec->ibcctrl |= (u64)val <<
+			SYM_LSB(IBCCtrl, MaxPktLen);
+		qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
+		qib_write_kreg(dd, kr_scratch, 0);
+		break;
+
+	case QIB_IB_CFG_LSTATE: /* set the IB link state */
+		switch (val & 0xffff0000) {
+		case IB_LINKCMD_DOWN:
+			lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN;
+			if (!dd->cspec->ibdeltainprog) {
+				dd->cspec->ibdeltainprog = 1;
+				dd->cspec->ibsymsnap =
+					read_6120_creg32(dd, cr_ibsymbolerr);
+				dd->cspec->iblnkerrsnap =
+					read_6120_creg32(dd, cr_iblinkerrrecov);
+			}
+			break;
+
+		case IB_LINKCMD_ARMED:
+			lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED;
+			break;
+
+		case IB_LINKCMD_ACTIVE:
+			lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE;
+			break;
+
+		default:
+			ret = -EINVAL;
+			qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16);
+			goto bail;
+		}
+		switch (val & 0xffff) {
+		case IB_LINKINITCMD_NOP:
+			licmd = 0;
+			break;
+
+		case IB_LINKINITCMD_POLL:
+			licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL;
+			break;
+
+		case IB_LINKINITCMD_SLEEP:
+			licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP;
+			break;
+
+		case IB_LINKINITCMD_DISABLE:
+			licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE;
+			break;
+
+		default:
+			ret = -EINVAL;
+			qib_dev_err(dd, "bad linkinitcmd req 0x%x\n",
+				    val & 0xffff);
+			goto bail;
+		}
+		qib_set_ib_6120_lstate(ppd, lcmd, licmd);
+		goto bail;
+
+	case QIB_IB_CFG_HRTBT:
+		ret = -EINVAL;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+bail:
+	return ret;
+}
+
+static int qib_6120_set_loopback(struct qib_pportdata *ppd, const char *what)
+{
+	int ret = 0;
+
+	if (!strncmp(what, "ibc", 3)) {
+		ppd->dd->cspec->ibcctrl |= SYM_MASK(IBCCtrl, Loopback);
+		qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n",
+			 ppd->dd->unit, ppd->port);
+	} else if (!strncmp(what, "off", 3)) {
+		ppd->dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback);
+		qib_devinfo(ppd->dd->pcidev,
+			"Disabling IB%u:%u IBC loopback (normal)\n",
+			ppd->dd->unit, ppd->port);
+	} else
+		ret = -EINVAL;
+	if (!ret) {
+		qib_write_kreg(ppd->dd, kr_ibcctrl, ppd->dd->cspec->ibcctrl);
+		qib_write_kreg(ppd->dd, kr_scratch, 0);
+	}
+	return ret;
+}
+
+static void pma_6120_timer(struct timer_list *t)
+{
+	struct qib_chip_specific *cs = from_timer(cs, t, pma_timer);
+	struct qib_pportdata *ppd = cs->ppd;
+	struct qib_ibport *ibp = &ppd->ibport_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ibp->rvp.lock, flags);
+	if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED) {
+		cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING;
+		qib_snapshot_counters(ppd, &cs->sword, &cs->rword,
+				      &cs->spkts, &cs->rpkts, &cs->xmit_wait);
+		mod_timer(&cs->pma_timer,
+		      jiffies + usecs_to_jiffies(ibp->rvp.pma_sample_interval));
+	} else if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) {
+		u64 ta, tb, tc, td, te;
+
+		cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE;
+		qib_snapshot_counters(ppd, &ta, &tb, &tc, &td, &te);
+
+		cs->sword = ta - cs->sword;
+		cs->rword = tb - cs->rword;
+		cs->spkts = tc - cs->spkts;
+		cs->rpkts = td - cs->rpkts;
+		cs->xmit_wait = te - cs->xmit_wait;
+	}
+	spin_unlock_irqrestore(&ibp->rvp.lock, flags);
+}
+
+/*
+ * Note that the caller has the ibp->rvp.lock held.
+ */
+static void qib_set_cntr_6120_sample(struct qib_pportdata *ppd, u32 intv,
+				     u32 start)
+{
+	struct qib_chip_specific *cs = ppd->dd->cspec;
+
+	if (start && intv) {
+		cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED;
+		mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(start));
+	} else if (intv) {
+		cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING;
+		qib_snapshot_counters(ppd, &cs->sword, &cs->rword,
+				      &cs->spkts, &cs->rpkts, &cs->xmit_wait);
+		mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(intv));
+	} else {
+		cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE;
+		cs->sword = 0;
+		cs->rword = 0;
+		cs->spkts = 0;
+		cs->rpkts = 0;
+		cs->xmit_wait = 0;
+	}
+}
+
+static u32 qib_6120_iblink_state(u64 ibcs)
+{
+	u32 state = (u32)SYM_FIELD(ibcs, IBCStatus, LinkState);
+
+	switch (state) {
+	case IB_6120_L_STATE_INIT:
+		state = IB_PORT_INIT;
+		break;
+	case IB_6120_L_STATE_ARM:
+		state = IB_PORT_ARMED;
+		break;
+	case IB_6120_L_STATE_ACTIVE:
+	case IB_6120_L_STATE_ACT_DEFER:
+		state = IB_PORT_ACTIVE;
+		break;
+	default:
+		fallthrough;
+	case IB_6120_L_STATE_DOWN:
+		state = IB_PORT_DOWN;
+		break;
+	}
+	return state;
+}
+
+/* returns the IBTA port state, rather than the IBC link training state */
+static u8 qib_6120_phys_portstate(u64 ibcs)
+{
+	u8 state = (u8)SYM_FIELD(ibcs, IBCStatus, LinkTrainingState);
+	return qib_6120_physportstate[state];
+}
+
+static int qib_6120_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ppd->lflags_lock, flags);
+	ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY;
+	spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+
+	if (ibup) {
+		if (ppd->dd->cspec->ibdeltainprog) {
+			ppd->dd->cspec->ibdeltainprog = 0;
+			ppd->dd->cspec->ibsymdelta +=
+				read_6120_creg32(ppd->dd, cr_ibsymbolerr) -
+					ppd->dd->cspec->ibsymsnap;
+			ppd->dd->cspec->iblnkerrdelta +=
+				read_6120_creg32(ppd->dd, cr_iblinkerrrecov) -
+					ppd->dd->cspec->iblnkerrsnap;
+		}
+		qib_hol_init(ppd);
+	} else {
+		ppd->dd->cspec->lli_counter = 0;
+		if (!ppd->dd->cspec->ibdeltainprog) {
+			ppd->dd->cspec->ibdeltainprog = 1;
+			ppd->dd->cspec->ibsymsnap =
+				read_6120_creg32(ppd->dd, cr_ibsymbolerr);
+			ppd->dd->cspec->iblnkerrsnap =
+				read_6120_creg32(ppd->dd, cr_iblinkerrrecov);
+		}
+		qib_hol_down(ppd);
+	}
+
+	qib_6120_setup_setextled(ppd, ibup);
+
+	return 0;
+}
+
+/* Does read/modify/write to appropriate registers to
+ * set output and direction bits selected by mask.
+ * these are in their canonical positions (e.g. lsb of
+ * dir will end up in D48 of extctrl on existing chips).
+ * returns contents of GP Inputs.
+ */
+static int gpio_6120_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask)
+{
+	u64 read_val, new_out;
+	unsigned long flags;
+
+	if (mask) {
+		/* some bits being written, lock access to GPIO */
+		dir &= mask;
+		out &= mask;
+		spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
+		dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe));
+		dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe));
+		new_out = (dd->cspec->gpio_out & ~mask) | out;
+
+		qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
+		qib_write_kreg(dd, kr_gpio_out, new_out);
+		dd->cspec->gpio_out = new_out;
+		spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
+	}
+	/*
+	 * It is unlikely that a read at this time would get valid
+	 * data on a pin whose direction line was set in the same
+	 * call to this function. We include the read here because
+	 * that allows us to potentially combine a change on one pin with
+	 * a read on another, and because the old code did something like
+	 * this.
+	 */
+	read_val = qib_read_kreg64(dd, kr_extstatus);
+	return SYM_FIELD(read_val, EXTStatus, GPIOIn);
+}
+
+/*
+ * Read fundamental info we need to use the chip.  These are
+ * the registers that describe chip capabilities, and are
+ * saved in shadow registers.
+ */
+static void get_6120_chip_params(struct qib_devdata *dd)
+{
+	u64 val;
+	u32 piobufs;
+	int mtu;
+
+	dd->uregbase = qib_read_kreg32(dd, kr_userregbase);
+
+	dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt);
+	dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase);
+	dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase);
+	dd->palign = qib_read_kreg32(dd, kr_palign);
+	dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase);
+	dd->pio2k_bufbase = dd->piobufbase & 0xffffffff;
+
+	dd->rcvhdrcnt = qib_read_kreg32(dd, kr_rcvegrcnt);
+
+	val = qib_read_kreg64(dd, kr_sendpiosize);
+	dd->piosize2k = val & ~0U;
+	dd->piosize4k = val >> 32;
+
+	mtu = ib_mtu_enum_to_int(qib_ibmtu);
+	if (mtu == -1)
+		mtu = QIB_DEFAULT_MTU;
+	dd->pport->ibmtu = (u32)mtu;
+
+	val = qib_read_kreg64(dd, kr_sendpiobufcnt);
+	dd->piobcnt2k = val & ~0U;
+	dd->piobcnt4k = val >> 32;
+	dd->last_pio = dd->piobcnt4k + dd->piobcnt2k - 1;
+	/* these may be adjusted in init_chip_wc_pat() */
+	dd->pio2kbase = (u32 __iomem *)
+		(((char __iomem *)dd->kregbase) + dd->pio2k_bufbase);
+	if (dd->piobcnt4k) {
+		dd->pio4kbase = (u32 __iomem *)
+			(((char __iomem *) dd->kregbase) +
+			 (dd->piobufbase >> 32));
+		/*
+		 * 4K buffers take 2 pages; we use roundup just to be
+		 * paranoid; we calculate it once here, rather than on
+		 * ever buf allocate
+		 */
+		dd->align4k = ALIGN(dd->piosize4k, dd->palign);
+	}
+
+	piobufs = dd->piobcnt4k + dd->piobcnt2k;
+
+	dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) /
+		(sizeof(u64) * BITS_PER_BYTE / 2);
+}
+
+/*
+ * The chip base addresses in cspec and cpspec have to be set
+ * after possible init_chip_wc_pat(), rather than in
+ * get_6120_chip_params(), so split out as separate function
+ */
+static void set_6120_baseaddrs(struct qib_devdata *dd)
+{
+	u32 cregbase;
+
+	cregbase = qib_read_kreg32(dd, kr_counterregbase);
+	dd->cspec->cregbase = (u64 __iomem *)
+		((char __iomem *) dd->kregbase + cregbase);
+
+	dd->egrtidbase = (u64 __iomem *)
+		((char __iomem *) dd->kregbase + dd->rcvegrbase);
+}
+
+/*
+ * Write the final few registers that depend on some of the
+ * init setup.  Done late in init, just before bringing up
+ * the serdes.
+ */
+static int qib_late_6120_initreg(struct qib_devdata *dd)
+{
+	int ret = 0;
+	u64 val;
+
+	qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize);
+	qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize);
+	qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt);
+	qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
+	val = qib_read_kreg64(dd, kr_sendpioavailaddr);
+	if (val != dd->pioavailregs_phys) {
+		qib_dev_err(dd,
+			"Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
+			(unsigned long) dd->pioavailregs_phys,
+			(unsigned long long) val);
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+static int init_6120_variables(struct qib_devdata *dd)
+{
+	int ret = 0;
+	struct qib_pportdata *ppd;
+	u32 sbufs;
+
+	ppd = (struct qib_pportdata *)(dd + 1);
+	dd->pport = ppd;
+	dd->num_pports = 1;
+
+	dd->cspec = (struct qib_chip_specific *)(ppd + dd->num_pports);
+	dd->cspec->ppd = ppd;
+	ppd->cpspec = NULL; /* not used in this chip */
+
+	spin_lock_init(&dd->cspec->kernel_tid_lock);
+	spin_lock_init(&dd->cspec->user_tid_lock);
+	spin_lock_init(&dd->cspec->rcvmod_lock);
+	spin_lock_init(&dd->cspec->gpio_lock);
+
+	/* we haven't yet set QIB_PRESENT, so use read directly */
+	dd->revision = readq(&dd->kregbase[kr_revision]);
+
+	if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
+		qib_dev_err(dd,
+			"Revision register read failure, giving up initialization\n");
+		ret = -ENODEV;
+		goto bail;
+	}
+	dd->flags |= QIB_PRESENT;  /* now register routines work */
+
+	dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R,
+				    ChipRevMajor);
+	dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R,
+				    ChipRevMinor);
+
+	get_6120_chip_params(dd);
+	pe_boardname(dd); /* fill in boardname */
+
+	/*
+	 * GPIO bits for TWSI data and clock,
+	 * used for serial EEPROM.
+	 */
+	dd->gpio_sda_num = _QIB_GPIO_SDA_NUM;
+	dd->gpio_scl_num = _QIB_GPIO_SCL_NUM;
+	dd->twsi_eeprom_dev = QIB_TWSI_NO_DEV;
+
+	if (qib_unordered_wc())
+		dd->flags |= QIB_PIO_FLUSH_WC;
+
+	ret = qib_init_pportdata(ppd, dd, 0, 1);
+	if (ret)
+		goto bail;
+	ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
+	ppd->link_speed_supported = QIB_IB_SDR;
+	ppd->link_width_enabled = IB_WIDTH_4X;
+	ppd->link_speed_enabled = ppd->link_speed_supported;
+	/* these can't change for this chip, so set once */
+	ppd->link_width_active = ppd->link_width_enabled;
+	ppd->link_speed_active = ppd->link_speed_enabled;
+	ppd->vls_supported = IB_VL_VL0;
+	ppd->vls_operational = ppd->vls_supported;
+
+	dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE;
+	dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE;
+	dd->rhf_offset = 0;
+
+	/* we always allocate at least 2048 bytes for eager buffers */
+	ret = ib_mtu_enum_to_int(qib_ibmtu);
+	dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU;
+	dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
+
+	qib_6120_tidtemplate(dd);
+
+	/*
+	 * We can request a receive interrupt for 1 or
+	 * more packets from current offset.  For now, we set this
+	 * up for a single packet.
+	 */
+	dd->rhdrhead_intr_off = 1ULL << 32;
+
+	/* setup the stats timer; the add_timer is done at end of init */
+	timer_setup(&dd->stats_timer, qib_get_6120_faststats, 0);
+	timer_setup(&dd->cspec->pma_timer, pma_6120_timer, 0);
+
+	dd->ureg_align = qib_read_kreg32(dd, kr_palign);
+
+	dd->piosize2kmax_dwords = dd->piosize2k >> 2;
+	qib_6120_config_ctxts(dd);
+	qib_set_ctxtcnt(dd);
+
+	ret = init_chip_wc_pat(dd, 0);
+	if (ret)
+		goto bail;
+	set_6120_baseaddrs(dd); /* set chip access pointers now */
+
+	ret = 0;
+	if (qib_mini_init)
+		goto bail;
+
+	qib_num_cfg_vls = 1; /* if any 6120's, only one VL */
+
+	ret = qib_create_ctxts(dd);
+	init_6120_cntrnames(dd);
+
+	/* use all of 4KB buffers for the kernel, otherwise 16 */
+	sbufs = dd->piobcnt4k ?  dd->piobcnt4k : 16;
+
+	dd->lastctxt_piobuf = dd->piobcnt2k + dd->piobcnt4k - sbufs;
+	dd->pbufsctxt = dd->lastctxt_piobuf /
+		(dd->cfgctxts - dd->first_user_ctxt);
+
+	if (ret)
+		goto bail;
+bail:
+	return ret;
+}
+
+/*
+ * For this chip, we want to use the same buffer every time
+ * when we are trying to bring the link up (they are always VL15
+ * packets).  At that link state the packet should always go out immediately
+ * (or at least be discarded at the tx interface if the link is down).
+ * If it doesn't, and the buffer isn't available, that means some other
+ * sender has gotten ahead of us, and is preventing our packet from going
+ * out.  In that case, we flush all packets, and try again.  If that still
+ * fails, we fail the request, and hope things work the next time around.
+ *
+ * We don't need very complicated heuristics on whether the packet had
+ * time to go out or not, since even at SDR 1X, it goes out in very short
+ * time periods, covered by the chip reads done here and as part of the
+ * flush.
+ */
+static u32 __iomem *get_6120_link_buf(struct qib_pportdata *ppd, u32 *bnum)
+{
+	u32 __iomem *buf;
+	u32 lbuf = ppd->dd->piobcnt2k + ppd->dd->piobcnt4k - 1;
+
+	/*
+	 * always blip to get avail list updated, since it's almost
+	 * always needed, and is fairly cheap.
+	 */
+	sendctrl_6120_mod(ppd->dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
+	qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
+	buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
+	if (buf)
+		goto done;
+
+	sendctrl_6120_mod(ppd, QIB_SENDCTRL_DISARM_ALL | QIB_SENDCTRL_FLUSH |
+			  QIB_SENDCTRL_AVAIL_BLIP);
+	ppd->dd->upd_pio_shadow  = 1; /* update our idea of what's busy */
+	qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
+	buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
+done:
+	return buf;
+}
+
+static u32 __iomem *qib_6120_getsendbuf(struct qib_pportdata *ppd, u64 pbc,
+					u32 *pbufnum)
+{
+	u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK;
+	struct qib_devdata *dd = ppd->dd;
+	u32 __iomem *buf;
+
+	if (((pbc >> 32) & PBC_6120_VL15_SEND_CTRL) &&
+		!(ppd->lflags & (QIBL_IB_AUTONEG_INPROG | QIBL_LINKACTIVE)))
+		buf = get_6120_link_buf(ppd, pbufnum);
+	else {
+
+		if ((plen + 1) > dd->piosize2kmax_dwords)
+			first = dd->piobcnt2k;
+		else
+			first = 0;
+		/* try 4k if all 2k busy, so same last for both sizes */
+		last = dd->piobcnt2k + dd->piobcnt4k - 1;
+		buf = qib_getsendbuf_range(dd, pbufnum, first, last);
+	}
+	return buf;
+}
+
+static int init_sdma_6120_regs(struct qib_pportdata *ppd)
+{
+	return -ENODEV;
+}
+
+static u16 qib_sdma_6120_gethead(struct qib_pportdata *ppd)
+{
+	return 0;
+}
+
+static int qib_sdma_6120_busy(struct qib_pportdata *ppd)
+{
+	return 0;
+}
+
+static void qib_sdma_update_6120_tail(struct qib_pportdata *ppd, u16 tail)
+{
+}
+
+static void qib_6120_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op)
+{
+}
+
+static void qib_sdma_set_6120_desc_cnt(struct qib_pportdata *ppd, unsigned cnt)
+{
+}
+
+/*
+ * the pbc doesn't need a VL15 indicator, but we need it for link_buf.
+ * The chip ignores the bit if set.
+ */
+static u32 qib_6120_setpbc_control(struct qib_pportdata *ppd, u32 plen,
+				   u8 srate, u8 vl)
+{
+	return vl == 15 ? PBC_6120_VL15_SEND_CTRL : 0;
+}
+
+static void qib_6120_initvl15_bufs(struct qib_devdata *dd)
+{
+}
+
+static void qib_6120_init_ctxt(struct qib_ctxtdata *rcd)
+{
+	rcd->rcvegrcnt = rcd->dd->rcvhdrcnt;
+	rcd->rcvegr_tid_base = rcd->ctxt * rcd->rcvegrcnt;
+}
+
+static void qib_6120_txchk_change(struct qib_devdata *dd, u32 start,
+	u32 len, u32 avail, struct qib_ctxtdata *rcd)
+{
+}
+
+static void writescratch(struct qib_devdata *dd, u32 val)
+{
+	(void) qib_write_kreg(dd, kr_scratch, val);
+}
+
+static int qib_6120_tempsense_rd(struct qib_devdata *dd, int regnum)
+{
+	return -ENXIO;
+}
+
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+static int qib_6120_notify_dca(struct qib_devdata *dd, unsigned long event)
+{
+	return 0;
+}
+#endif
+
+/* Dummy function, as 6120 boards never disable EEPROM Write */
+static int qib_6120_eeprom_wen(struct qib_devdata *dd, int wen)
+{
+	return 1;
+}
+
+/**
+ * qib_init_iba6120_funcs - set up the chip-specific function pointers
+ * @pdev: pci_dev of the qlogic_ib device
+ * @ent: pci_device_id matching this chip
+ *
+ * This is global, and is called directly at init to set up the
+ * chip-specific function pointers for later use.
+ *
+ * It also allocates/partially-inits the qib_devdata struct for
+ * this device.
+ */
+struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *pdev,
+					   const struct pci_device_id *ent)
+{
+	struct qib_devdata *dd;
+	int ret;
+
+	dd = qib_alloc_devdata(pdev, sizeof(struct qib_pportdata) +
+			       sizeof(struct qib_chip_specific));
+	if (IS_ERR(dd))
+		goto bail;
+
+	dd->f_bringup_serdes    = qib_6120_bringup_serdes;
+	dd->f_cleanup           = qib_6120_setup_cleanup;
+	dd->f_clear_tids        = qib_6120_clear_tids;
+	dd->f_free_irq          = qib_free_irq;
+	dd->f_get_base_info     = qib_6120_get_base_info;
+	dd->f_get_msgheader     = qib_6120_get_msgheader;
+	dd->f_getsendbuf        = qib_6120_getsendbuf;
+	dd->f_gpio_mod          = gpio_6120_mod;
+	dd->f_eeprom_wen	= qib_6120_eeprom_wen;
+	dd->f_hdrqempty         = qib_6120_hdrqempty;
+	dd->f_ib_updown         = qib_6120_ib_updown;
+	dd->f_init_ctxt         = qib_6120_init_ctxt;
+	dd->f_initvl15_bufs     = qib_6120_initvl15_bufs;
+	dd->f_intr_fallback     = qib_6120_nointr_fallback;
+	dd->f_late_initreg      = qib_late_6120_initreg;
+	dd->f_setpbc_control    = qib_6120_setpbc_control;
+	dd->f_portcntr          = qib_portcntr_6120;
+	dd->f_put_tid           = (dd->minrev >= 2) ?
+				      qib_6120_put_tid_2 :
+				      qib_6120_put_tid;
+	dd->f_quiet_serdes      = qib_6120_quiet_serdes;
+	dd->f_rcvctrl           = rcvctrl_6120_mod;
+	dd->f_read_cntrs        = qib_read_6120cntrs;
+	dd->f_read_portcntrs    = qib_read_6120portcntrs;
+	dd->f_reset             = qib_6120_setup_reset;
+	dd->f_init_sdma_regs    = init_sdma_6120_regs;
+	dd->f_sdma_busy         = qib_sdma_6120_busy;
+	dd->f_sdma_gethead      = qib_sdma_6120_gethead;
+	dd->f_sdma_sendctrl     = qib_6120_sdma_sendctrl;
+	dd->f_sdma_set_desc_cnt = qib_sdma_set_6120_desc_cnt;
+	dd->f_sdma_update_tail  = qib_sdma_update_6120_tail;
+	dd->f_sendctrl          = sendctrl_6120_mod;
+	dd->f_set_armlaunch     = qib_set_6120_armlaunch;
+	dd->f_set_cntr_sample   = qib_set_cntr_6120_sample;
+	dd->f_iblink_state      = qib_6120_iblink_state;
+	dd->f_ibphys_portstate  = qib_6120_phys_portstate;
+	dd->f_get_ib_cfg        = qib_6120_get_ib_cfg;
+	dd->f_set_ib_cfg        = qib_6120_set_ib_cfg;
+	dd->f_set_ib_loopback   = qib_6120_set_loopback;
+	dd->f_set_intr_state    = qib_6120_set_intr_state;
+	dd->f_setextled         = qib_6120_setup_setextled;
+	dd->f_txchk_change      = qib_6120_txchk_change;
+	dd->f_update_usrhead    = qib_update_6120_usrhead;
+	dd->f_wantpiobuf_intr   = qib_wantpiobuf_6120_intr;
+	dd->f_xgxs_reset        = qib_6120_xgxs_reset;
+	dd->f_writescratch      = writescratch;
+	dd->f_tempsense_rd	= qib_6120_tempsense_rd;
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+	dd->f_notify_dca = qib_6120_notify_dca;
+#endif
+	/*
+	 * Do remaining pcie setup and save pcie values in dd.
+	 * Any error printing is already done by the init code.
+	 * On return, we have the chip mapped and accessible,
+	 * but chip registers are not set up until start of
+	 * init_6120_variables.
+	 */
+	ret = qib_pcie_ddinit(dd, pdev, ent);
+	if (ret < 0)
+		goto bail_free;
+
+	/* initialize chip-specific variables */
+	ret = init_6120_variables(dd);
+	if (ret)
+		goto bail_cleanup;
+
+	if (qib_mini_init)
+		goto bail;
+
+	if (qib_pcie_params(dd, 8, NULL))
+		qib_dev_err(dd,
+			"Failed to setup PCIe or interrupts; continuing anyway\n");
+	/* clear diagctrl register, in case diags were running and crashed */
+	qib_write_kreg(dd, kr_hwdiagctrl, 0);
+
+	if (qib_read_kreg64(dd, kr_hwerrstatus) &
+	    QLOGIC_IB_HWE_SERDESPLLFAILED)
+		qib_write_kreg(dd, kr_hwerrclear,
+			       QLOGIC_IB_HWE_SERDESPLLFAILED);
+
+	/* setup interrupt handler (interrupt type handled above) */
+	qib_setup_6120_interrupt(dd);
+	/* Note that qpn_mask is set by qib_6120_config_ctxts() first */
+	qib_6120_init_hwerrors(dd);
+
+	goto bail;
+
+bail_cleanup:
+	qib_pcie_ddcleanup(dd);
+bail_free:
+	qib_free_devdata(dd);
+	dd = ERR_PTR(ret);
+bail:
+	return dd;
+}