Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 631 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c
new file mode 100644
index 000000000..52f9e9eaa
--- /dev/null
+++ b/drivers/input/touchscreen/zinitix.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Register Map */
+
+#define ZINITIX_SWRESET_CMD			0x0000
+#define ZINITIX_WAKEUP_CMD			0x0001
+
+#define ZINITIX_IDLE_CMD			0x0004
+#define ZINITIX_SLEEP_CMD			0x0005
+
+#define ZINITIX_CLEAR_INT_STATUS_CMD		0x0003
+#define ZINITIX_CALIBRATE_CMD			0x0006
+#define ZINITIX_SAVE_STATUS_CMD			0x0007
+#define ZINITIX_SAVE_CALIBRATION_CMD		0x0008
+#define ZINITIX_RECALL_FACTORY_CMD		0x000f
+
+#define ZINITIX_THRESHOLD			0x0020
+
+#define ZINITIX_LARGE_PALM_REJECT_AREA_TH	0x003F
+
+#define ZINITIX_DEBUG_REG			0x0115 /* 0~7 */
+
+#define ZINITIX_TOUCH_MODE			0x0010
+#define ZINITIX_CHIP_REVISION			0x0011
+#define ZINITIX_FIRMWARE_VERSION		0x0012
+
+#define ZINITIX_USB_DETECT			0x116
+
+#define ZINITIX_MINOR_FW_VERSION		0x0121
+
+#define ZINITIX_VENDOR_ID			0x001C
+#define ZINITIX_HW_ID				0x0014
+
+#define ZINITIX_DATA_VERSION_REG		0x0013
+#define ZINITIX_SUPPORTED_FINGER_NUM		0x0015
+#define ZINITIX_EEPROM_INFO			0x0018
+#define ZINITIX_INITIAL_TOUCH_MODE		0x0019
+
+#define ZINITIX_TOTAL_NUMBER_OF_X		0x0060
+#define ZINITIX_TOTAL_NUMBER_OF_Y		0x0061
+
+#define ZINITIX_DELAY_RAW_FOR_HOST		0x007f
+
+#define ZINITIX_BUTTON_SUPPORTED_NUM		0x00B0
+#define ZINITIX_BUTTON_SENSITIVITY		0x00B2
+#define ZINITIX_DUMMY_BUTTON_SENSITIVITY	0X00C8
+
+#define ZINITIX_X_RESOLUTION			0x00C0
+#define ZINITIX_Y_RESOLUTION			0x00C1
+
+#define ZINITIX_POINT_STATUS_REG		0x0080
+#define ZINITIX_ICON_STATUS_REG			0x00AA
+
+#define ZINITIX_POINT_COORD_REG			(ZINITIX_POINT_STATUS_REG + 2)
+
+#define ZINITIX_AFE_FREQUENCY			0x0100
+#define ZINITIX_DND_N_COUNT			0x0122
+#define ZINITIX_DND_U_COUNT			0x0135
+
+#define ZINITIX_RAWDATA_REG			0x0200
+
+#define ZINITIX_EEPROM_INFO_REG			0x0018
+
+#define ZINITIX_INT_ENABLE_FLAG			0x00f0
+#define ZINITIX_PERIODICAL_INTERRUPT_INTERVAL	0x00f1
+
+#define ZINITIX_BTN_WIDTH			0x016d
+
+#define ZINITIX_CHECKSUM_RESULT			0x012c
+
+#define ZINITIX_INIT_FLASH			0x01d0
+#define ZINITIX_WRITE_FLASH			0x01d1
+#define ZINITIX_READ_FLASH			0x01d2
+
+#define ZINITIX_INTERNAL_FLAG_02		0x011e
+#define ZINITIX_INTERNAL_FLAG_03		0x011f
+
+#define ZINITIX_I2C_CHECKSUM_WCNT		0x016a
+#define ZINITIX_I2C_CHECKSUM_RESULT		0x016c
+
+/* Interrupt & status register flags */
+
+#define BIT_PT_CNT_CHANGE			BIT(0)
+#define BIT_DOWN				BIT(1)
+#define BIT_MOVE				BIT(2)
+#define BIT_UP					BIT(3)
+#define BIT_PALM				BIT(4)
+#define BIT_PALM_REJECT				BIT(5)
+#define BIT_RESERVED_0				BIT(6)
+#define BIT_RESERVED_1				BIT(7)
+#define BIT_WEIGHT_CHANGE			BIT(8)
+#define BIT_PT_NO_CHANGE			BIT(9)
+#define BIT_REJECT				BIT(10)
+#define BIT_PT_EXIST				BIT(11)
+#define BIT_RESERVED_2				BIT(12)
+#define BIT_ERROR				BIT(13)
+#define BIT_DEBUG				BIT(14)
+#define BIT_ICON_EVENT				BIT(15)
+
+#define SUB_BIT_EXIST				BIT(0)
+#define SUB_BIT_DOWN				BIT(1)
+#define SUB_BIT_MOVE				BIT(2)
+#define SUB_BIT_UP				BIT(3)
+#define SUB_BIT_UPDATE				BIT(4)
+#define SUB_BIT_WAIT				BIT(5)
+
+#define DEFAULT_TOUCH_POINT_MODE		2
+#define MAX_SUPPORTED_FINGER_NUM		5
+
+#define CHIP_ON_DELAY				15 // ms
+#define FIRMWARE_ON_DELAY			40 // ms
+
+struct point_coord {
+	__le16	x;
+	__le16	y;
+	u8	width;
+	u8	sub_status;
+	// currently unused, but needed as padding:
+	u8	minor_width;
+	u8	angle;
+};
+
+struct touch_event {
+	__le16	status;
+	u8	finger_mask;
+	u8	time_stamp;
+	struct point_coord point_coord[MAX_SUPPORTED_FINGER_NUM];
+};
+
+struct bt541_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct touchscreen_properties prop;
+	struct regulator_bulk_data supplies[2];
+	u32 zinitix_mode;
+};
+
+static int zinitix_read_data(struct i2c_client *client,
+			     u16 reg, void *values, size_t length)
+{
+	__le16 reg_le = cpu_to_le16(reg);
+	int ret;
+
+	/* A single i2c_transfer() transaction does not work here. */
+	ret = i2c_master_send(client, (u8 *)&reg_le, sizeof(reg_le));
+	if (ret != sizeof(reg_le))
+		return ret < 0 ? ret : -EIO;
+
+	ret = i2c_master_recv(client, (u8 *)values, length);
+	if (ret != length)
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int zinitix_write_u16(struct i2c_client *client, u16 reg, u16 value)
+{
+	__le16 packet[2] = {cpu_to_le16(reg), cpu_to_le16(value)};
+	int ret;
+
+	ret = i2c_master_send(client, (u8 *)packet, sizeof(packet));
+	if (ret != sizeof(packet))
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int zinitix_write_cmd(struct i2c_client *client, u16 reg)
+{
+	__le16 reg_le = cpu_to_le16(reg);
+	int ret;
+
+	ret = i2c_master_send(client, (u8 *)&reg_le, sizeof(reg_le));
+	if (ret != sizeof(reg_le))
+		return ret < 0 ? ret : -EIO;
+
+	return 0;
+}
+
+static int zinitix_init_touch(struct bt541_ts_data *bt541)
+{
+	struct i2c_client *client = bt541->client;
+	int i;
+	int error;
+
+	error = zinitix_write_cmd(client, ZINITIX_SWRESET_CMD);
+	if (error) {
+		dev_err(&client->dev, "Failed to write reset command\n");
+		return error;
+	}
+
+	error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG, 0x0);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to reset interrupt enable flag\n");
+		return error;
+	}
+
+	/* initialize */
+	error = zinitix_write_u16(client, ZINITIX_X_RESOLUTION,
+				  bt541->prop.max_x);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, ZINITIX_Y_RESOLUTION,
+				  bt541->prop.max_y);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, ZINITIX_SUPPORTED_FINGER_NUM,
+				  MAX_SUPPORTED_FINGER_NUM);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, ZINITIX_INITIAL_TOUCH_MODE,
+				  bt541->zinitix_mode);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, ZINITIX_TOUCH_MODE,
+				  bt541->zinitix_mode);
+	if (error)
+		return error;
+
+	error = zinitix_write_u16(client, ZINITIX_INT_ENABLE_FLAG,
+				  BIT_PT_CNT_CHANGE | BIT_DOWN | BIT_MOVE |
+					BIT_UP);
+	if (error)
+		return error;
+
+	/* clear queue */
+	for (i = 0; i < 10; i++) {
+		zinitix_write_cmd(client, ZINITIX_CLEAR_INT_STATUS_CMD);
+		udelay(10);
+	}
+
+	return 0;
+}
+
+static int zinitix_init_regulators(struct bt541_ts_data *bt541)
+{
+	struct device *dev = &bt541->client->dev;
+	int error;
+
+	/*
+	 * Some older device trees have erroneous names for the regulators,
+	 * so check if "vddo" is present and in that case use these names.
+	 * Else use the proper supply names on the component.
+	 */
+	if (of_find_property(dev->of_node, "vddo-supply", NULL)) {
+		bt541->supplies[0].supply = "vdd";
+		bt541->supplies[1].supply = "vddo";
+	} else {
+		/* Else use the proper supply names */
+		bt541->supplies[0].supply = "vcca";
+		bt541->supplies[1].supply = "vdd";
+	}
+	error = devm_regulator_bulk_get(dev,
+					ARRAY_SIZE(bt541->supplies),
+					bt541->supplies);
+	if (error < 0) {
+		dev_err(dev, "Failed to get regulators: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int zinitix_send_power_on_sequence(struct bt541_ts_data *bt541)
+{
+	int error;
+	struct i2c_client *client = bt541->client;
+
+	error = zinitix_write_u16(client, 0xc000, 0x0001);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence(vendor cmd enable)\n");
+		return error;
+	}
+	udelay(10);
+
+	error = zinitix_write_cmd(client, 0xc004);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence (intn clear)\n");
+		return error;
+	}
+	udelay(10);
+
+	error = zinitix_write_u16(client, 0xc002, 0x0001);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence (nvm init)\n");
+		return error;
+	}
+	mdelay(2);
+
+	error = zinitix_write_u16(client, 0xc001, 0x0001);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to send power sequence (program start)\n");
+		return error;
+	}
+	msleep(FIRMWARE_ON_DELAY);
+
+	return 0;
+}
+
+static void zinitix_report_finger(struct bt541_ts_data *bt541, int slot,
+				  const struct point_coord *p)
+{
+	u16 x, y;
+
+	if (unlikely(!(p->sub_status &
+		       (SUB_BIT_UP | SUB_BIT_DOWN | SUB_BIT_MOVE)))) {
+		dev_dbg(&bt541->client->dev, "unknown finger event %#02x\n",
+			p->sub_status);
+		return;
+	}
+
+	x = le16_to_cpu(p->x);
+	y = le16_to_cpu(p->y);
+
+	input_mt_slot(bt541->input_dev, slot);
+	if (input_mt_report_slot_state(bt541->input_dev, MT_TOOL_FINGER,
+				       !(p->sub_status & SUB_BIT_UP))) {
+		touchscreen_report_pos(bt541->input_dev,
+				       &bt541->prop, x, y, true);
+		input_report_abs(bt541->input_dev,
+				 ABS_MT_TOUCH_MAJOR, p->width);
+		dev_dbg(&bt541->client->dev, "finger %d %s (%u, %u)\n",
+			slot, p->sub_status & SUB_BIT_DOWN ? "down" : "move",
+			x, y);
+	} else {
+		dev_dbg(&bt541->client->dev, "finger %d up (%u, %u)\n",
+			slot, x, y);
+	}
+}
+
+static irqreturn_t zinitix_ts_irq_handler(int irq, void *bt541_handler)
+{
+	struct bt541_ts_data *bt541 = bt541_handler;
+	struct i2c_client *client = bt541->client;
+	struct touch_event touch_event;
+	unsigned long finger_mask;
+	int error;
+	int i;
+
+	memset(&touch_event, 0, sizeof(struct touch_event));
+
+	error = zinitix_read_data(bt541->client, ZINITIX_POINT_STATUS_REG,
+				  &touch_event, sizeof(struct touch_event));
+	if (error) {
+		dev_err(&client->dev, "Failed to read in touchpoint struct\n");
+		goto out;
+	}
+
+	finger_mask = touch_event.finger_mask;
+	for_each_set_bit(i, &finger_mask, MAX_SUPPORTED_FINGER_NUM) {
+		const struct point_coord *p = &touch_event.point_coord[i];
+
+		/* Only process contacts that are actually reported */
+		if (p->sub_status & SUB_BIT_EXIST)
+			zinitix_report_finger(bt541, i, p);
+	}
+
+	input_mt_sync_frame(bt541->input_dev);
+	input_sync(bt541->input_dev);
+
+out:
+	zinitix_write_cmd(bt541->client, ZINITIX_CLEAR_INT_STATUS_CMD);
+	return IRQ_HANDLED;
+}
+
+static int zinitix_start(struct bt541_ts_data *bt541)
+{
+	int error;
+
+	error = regulator_bulk_enable(ARRAY_SIZE(bt541->supplies),
+				      bt541->supplies);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to enable regulators: %d\n", error);
+		return error;
+	}
+
+	msleep(CHIP_ON_DELAY);
+
+	error = zinitix_send_power_on_sequence(bt541);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Error while sending power-on sequence: %d\n", error);
+		return error;
+	}
+
+	error = zinitix_init_touch(bt541);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Error while configuring touch IC\n");
+		return error;
+	}
+
+	enable_irq(bt541->client->irq);
+
+	return 0;
+}
+
+static int zinitix_stop(struct bt541_ts_data *bt541)
+{
+	int error;
+
+	disable_irq(bt541->client->irq);
+
+	error = regulator_bulk_disable(ARRAY_SIZE(bt541->supplies),
+				       bt541->supplies);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to disable regulators: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int zinitix_input_open(struct input_dev *dev)
+{
+	struct bt541_ts_data *bt541 = input_get_drvdata(dev);
+
+	return zinitix_start(bt541);
+}
+
+static void zinitix_input_close(struct input_dev *dev)
+{
+	struct bt541_ts_data *bt541 = input_get_drvdata(dev);
+
+	zinitix_stop(bt541);
+}
+
+static int zinitix_init_input_dev(struct bt541_ts_data *bt541)
+{
+	struct input_dev *input_dev;
+	int error;
+
+	input_dev = devm_input_allocate_device(&bt541->client->dev);
+	if (!input_dev) {
+		dev_err(&bt541->client->dev,
+			"Failed to allocate input device.");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(input_dev, bt541);
+	bt541->input_dev = input_dev;
+
+	input_dev->name = "Zinitix Capacitive TouchScreen";
+	input_dev->phys = "input/ts";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->open = zinitix_input_open;
+	input_dev->close = zinitix_input_close;
+
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+	input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+	input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+	touchscreen_parse_properties(input_dev, true, &bt541->prop);
+	if (!bt541->prop.max_x || !bt541->prop.max_y) {
+		dev_err(&bt541->client->dev,
+			"Touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
+		return -EINVAL;
+	}
+
+	error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to initialize MT slots: %d", error);
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&bt541->client->dev,
+			"Failed to register input device: %d", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int zinitix_ts_probe(struct i2c_client *client)
+{
+	struct bt541_ts_data *bt541;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev,
+			"Failed to assert adapter's support for plain I2C.\n");
+		return -ENXIO;
+	}
+
+	bt541 = devm_kzalloc(&client->dev, sizeof(*bt541), GFP_KERNEL);
+	if (!bt541)
+		return -ENOMEM;
+
+	bt541->client = client;
+	i2c_set_clientdata(client, bt541);
+
+	error = zinitix_init_regulators(bt541);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to initialize regulators: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, zinitix_ts_irq_handler,
+					  IRQF_ONESHOT | IRQF_NO_AUTOEN,
+					  client->name, bt541);
+	if (error) {
+		dev_err(&client->dev, "Failed to request IRQ: %d\n", error);
+		return error;
+	}
+
+	error = zinitix_init_input_dev(bt541);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to initialize input device: %d\n", error);
+		return error;
+	}
+
+	error = device_property_read_u32(&client->dev, "zinitix,mode",
+					 &bt541->zinitix_mode);
+	if (error < 0) {
+		/* fall back to mode 2 */
+		bt541->zinitix_mode = DEFAULT_TOUCH_POINT_MODE;
+	}
+
+	if (bt541->zinitix_mode != 2) {
+		/*
+		 * If there are devices that don't support mode 2, support
+		 * for other modes (0, 1) will be needed.
+		 */
+		dev_err(&client->dev,
+			"Malformed zinitix,mode property, must be 2 (supplied: %d)\n",
+			bt541->zinitix_mode);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused zinitix_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bt541_ts_data *bt541 = i2c_get_clientdata(client);
+
+	mutex_lock(&bt541->input_dev->mutex);
+
+	if (input_device_enabled(bt541->input_dev))
+		zinitix_stop(bt541);
+
+	mutex_unlock(&bt541->input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused zinitix_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bt541_ts_data *bt541 = i2c_get_clientdata(client);
+	int ret = 0;
+
+	mutex_lock(&bt541->input_dev->mutex);
+
+	if (input_device_enabled(bt541->input_dev))
+		ret = zinitix_start(bt541);
+
+	mutex_unlock(&bt541->input_dev->mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(zinitix_pm_ops, zinitix_suspend, zinitix_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id zinitix_of_match[] = {
+	{ .compatible = "zinitix,bt402" },
+	{ .compatible = "zinitix,bt403" },
+	{ .compatible = "zinitix,bt404" },
+	{ .compatible = "zinitix,bt412" },
+	{ .compatible = "zinitix,bt413" },
+	{ .compatible = "zinitix,bt431" },
+	{ .compatible = "zinitix,bt432" },
+	{ .compatible = "zinitix,bt531" },
+	{ .compatible = "zinitix,bt532" },
+	{ .compatible = "zinitix,bt538" },
+	{ .compatible = "zinitix,bt541" },
+	{ .compatible = "zinitix,bt548" },
+	{ .compatible = "zinitix,bt554" },
+	{ .compatible = "zinitix,at100" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, zinitix_of_match);
+#endif
+
+static struct i2c_driver zinitix_ts_driver = {
+	.probe_new = zinitix_ts_probe,
+	.driver = {
+		.name = "Zinitix-TS",
+		.pm = &zinitix_pm_ops,
+		.of_match_table = of_match_ptr(zinitix_of_match),
+	},
+};
+module_i2c_driver(zinitix_ts_driver);
+
+MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>");
+MODULE_DESCRIPTION("Zinitix touchscreen driver");
+MODULE_LICENSE("GPL v2");