Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 278 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/dibx000_common.h b/drivers/media/dvb-frontends/dibx000_common.h
new file mode 100644
index 000000000..12b58f5c6
--- /dev/null
+++ b/drivers/media/dvb-frontends/dibx000_common.h
@@ -0,0 +1,278 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef DIBX000_COMMON_H
+#define DIBX000_COMMON_H
+
+enum dibx000_i2c_interface {
+	DIBX000_I2C_INTERFACE_TUNER = 0,
+	DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
+	DIBX000_I2C_INTERFACE_GPIO_3_4 = 2,
+	DIBX000_I2C_INTERFACE_GPIO_6_7 = 3
+};
+
+struct dibx000_i2c_master {
+#define DIB3000MC 1
+#define DIB7000   2
+#define DIB7000P  11
+#define DIB7000MC 12
+#define DIB8000   13
+	u16 device_rev;
+
+	enum dibx000_i2c_interface selected_interface;
+
+/*	struct i2c_adapter  tuner_i2c_adap; */
+	struct i2c_adapter gated_tuner_i2c_adap;
+	struct i2c_adapter master_i2c_adap_gpio12;
+	struct i2c_adapter master_i2c_adap_gpio34;
+	struct i2c_adapter master_i2c_adap_gpio67;
+
+	struct i2c_adapter *i2c_adap;
+	u8 i2c_addr;
+
+	u16 base_reg;
+
+	/* for the I2C transfer */
+	struct i2c_msg msg[34];
+	u8 i2c_write_buffer[8];
+	u8 i2c_read_buffer[2];
+	struct mutex i2c_buffer_lock;
+};
+
+extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
+					u16 device_rev, struct i2c_adapter *i2c_adap,
+					u8 i2c_addr);
+extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
+							*mst,
+							enum dibx000_i2c_interface
+							intf, int gating);
+extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
+extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
+extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed);
+
+#define BAND_LBAND 0x01
+#define BAND_UHF   0x02
+#define BAND_VHF   0x04
+#define BAND_SBAND 0x08
+#define BAND_FM	   0x10
+#define BAND_CBAND 0x20
+
+#define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \
+									(freq_kHz) <= 115000 ? BAND_FM : \
+									(freq_kHz) <= 250000 ? BAND_VHF : \
+									(freq_kHz) <= 863000 ? BAND_UHF : \
+									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
+
+struct dibx000_agc_config {
+	/* defines the capabilities of this AGC-setting - using the BAND_-defines */
+	u8 band_caps;
+
+	u16 setup;
+
+	u16 inv_gain;
+	u16 time_stabiliz;
+
+	u8 alpha_level;
+	u16 thlock;
+
+	u8 wbd_inv;
+	u16 wbd_ref;
+	u8 wbd_sel;
+	u8 wbd_alpha;
+
+	u16 agc1_max;
+	u16 agc1_min;
+	u16 agc2_max;
+	u16 agc2_min;
+
+	u8 agc1_pt1;
+	u8 agc1_pt2;
+	u8 agc1_pt3;
+
+	u8 agc1_slope1;
+	u8 agc1_slope2;
+
+	u8 agc2_pt1;
+	u8 agc2_pt2;
+
+	u8 agc2_slope1;
+	u8 agc2_slope2;
+
+	u8 alpha_mant;
+	u8 alpha_exp;
+
+	u8 beta_mant;
+	u8 beta_exp;
+
+	u8 perform_agc_softsplit;
+
+	struct {
+		u16 min;
+		u16 max;
+		u16 min_thres;
+		u16 max_thres;
+	} split;
+};
+
+struct dibx000_bandwidth_config {
+	u32 internal;
+	u32 sampling;
+
+	u8 pll_prediv;
+	u8 pll_ratio;
+	u8 pll_range;
+	u8 pll_reset;
+	u8 pll_bypass;
+
+	u8 enable_refdiv;
+	u8 bypclk_div;
+	u8 IO_CLK_en_core;
+	u8 ADClkSrc;
+	u8 modulo;
+
+	u16 sad_cfg;
+
+	u32 ifreq;
+	u32 timf;
+
+	u32 xtal_hz;
+};
+
+enum dibx000_adc_states {
+	DIBX000_SLOW_ADC_ON = 0,
+	DIBX000_SLOW_ADC_OFF,
+	DIBX000_ADC_ON,
+	DIBX000_ADC_OFF,
+	DIBX000_VBG_ENABLE,
+	DIBX000_VBG_DISABLE,
+};
+
+#define BANDWIDTH_TO_KHZ(v)	((v) / 1000)
+#define BANDWIDTH_TO_HZ(v)	((v) * 1000)
+
+/* Chip output mode. */
+#define OUTMODE_HIGH_Z              0
+#define OUTMODE_MPEG2_PAR_GATED_CLK 1
+#define OUTMODE_MPEG2_PAR_CONT_CLK  2
+#define OUTMODE_MPEG2_SERIAL        7
+#define OUTMODE_DIVERSITY           4
+#define OUTMODE_MPEG2_FIFO          5
+#define OUTMODE_ANALOG_ADC          6
+
+#define INPUT_MODE_OFF                0x11
+#define INPUT_MODE_DIVERSITY          0x12
+#define INPUT_MODE_MPEG               0x13
+
+enum frontend_tune_state {
+	CT_TUNER_START = 10,
+	CT_TUNER_STEP_0,
+	CT_TUNER_STEP_1,
+	CT_TUNER_STEP_2,
+	CT_TUNER_STEP_3,
+	CT_TUNER_STEP_4,
+	CT_TUNER_STEP_5,
+	CT_TUNER_STEP_6,
+	CT_TUNER_STEP_7,
+	CT_TUNER_STOP,
+
+	CT_AGC_START = 20,
+	CT_AGC_STEP_0,
+	CT_AGC_STEP_1,
+	CT_AGC_STEP_2,
+	CT_AGC_STEP_3,
+	CT_AGC_STEP_4,
+	CT_AGC_STOP,
+
+	CT_DEMOD_START = 30,
+	CT_DEMOD_STEP_1,
+	CT_DEMOD_STEP_2,
+	CT_DEMOD_STEP_3,
+	CT_DEMOD_STEP_4,
+	CT_DEMOD_STEP_5,
+	CT_DEMOD_STEP_6,
+	CT_DEMOD_STEP_7,
+	CT_DEMOD_STEP_8,
+	CT_DEMOD_STEP_9,
+	CT_DEMOD_STEP_10,
+	CT_DEMOD_STEP_11,
+	CT_DEMOD_SEARCH_NEXT = 51,
+	CT_DEMOD_STEP_LOCKED,
+	CT_DEMOD_STOP,
+
+	CT_DONE = 100,
+	CT_SHUTDOWN,
+
+};
+
+struct dvb_frontend_parametersContext {
+#define CHANNEL_STATUS_PARAMETERS_UNKNOWN   0x01
+#define CHANNEL_STATUS_PARAMETERS_SET       0x02
+	u8 status;
+	u32 tune_time_estimation[2];
+	s32 tps_available;
+	u16 tps[9];
+};
+
+#define FE_STATUS_TUNE_FAILED          0
+#define FE_STATUS_TUNE_TIMED_OUT      -1
+#define FE_STATUS_TUNE_TIME_TOO_SHORT -2
+#define FE_STATUS_TUNE_PENDING        -3
+#define FE_STATUS_STD_SUCCESS         -4
+#define FE_STATUS_FFT_SUCCESS         -5
+#define FE_STATUS_DEMOD_SUCCESS       -6
+#define FE_STATUS_LOCKED              -7
+#define FE_STATUS_DATA_LOCKED         -8
+
+#define FE_CALLBACK_TIME_NEVER 0xffffffff
+
+#define DATA_BUS_ACCESS_MODE_8BIT                 0x01
+#define DATA_BUS_ACCESS_MODE_16BIT                0x02
+#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10
+
+struct dibGPIOFunction {
+#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1
+#define BOARD_GPIO_COMPONENT_DEMOD       2
+	u8 component;
+
+#define BOARD_GPIO_FUNCTION_BOARD_ON      1
+#define BOARD_GPIO_FUNCTION_BOARD_OFF     2
+#define BOARD_GPIO_FUNCTION_COMPONENT_ON  3
+#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4
+#define BOARD_GPIO_FUNCTION_SUBBAND_PWM   5
+#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO   6
+	u8 function;
+
+/* mask, direction and value are used specify which GPIO to change GPIO0
+ * is LSB and possible GPIO31 is MSB.  The same bit-position as in the
+ * mask is used for the direction and the value. Direction == 1 is OUT,
+ * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN
+ * value has no meaning.
+ *
+ * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be
+ * used to do the PWM. Direction gives the PWModulator to be used.
+ * Value gives the PWM value in device-dependent scale.
+ */
+	u32 mask;
+	u32 direction;
+	u32 value;
+};
+
+#define MAX_NB_SUBBANDS   8
+struct dibSubbandSelection {
+	u8  size; /* Actual number of subbands. */
+	struct {
+		u16 f_mhz;
+		struct dibGPIOFunction gpio;
+	} subband[MAX_NB_SUBBANDS];
+};
+
+#define DEMOD_TIMF_SET    0x00
+#define DEMOD_TIMF_GET    0x01
+#define DEMOD_TIMF_UPDATE 0x02
+
+#define MPEG_ON_DIBTX		1
+#define DIV_ON_DIBTX		2
+#define ADC_ON_DIBTX		3
+#define DEMOUT_ON_HOSTBUS	4
+#define DIBTX_ON_HOSTBUS	5
+#define MPEG_ON_HOSTBUS		6
+
+#endif