Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 93 insertions, 0 deletions

diff --git a/drivers/media/pci/mantis/mantis_vp3030.c b/drivers/media/pci/mantis/mantis_vp3030.c
new file mode 100644
index 000000000..0f6b02591
--- /dev/null
+++ b/drivers/media/pci/mantis/mantis_vp3030.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+	Mantis VP-3030 driver
+
+	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
+
+*/
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+
+#include <media/dmxdev.h>
+#include <media/dvbdev.h>
+#include <media/dvb_demux.h>
+#include <media/dvb_frontend.h>
+#include <media/dvb_net.h>
+
+#include "zl10353.h"
+#include "tda665x.h"
+#include "mantis_common.h"
+#include "mantis_ioc.h"
+#include "mantis_dvb.h"
+#include "mantis_vp3030.h"
+
+static struct zl10353_config mantis_vp3030_config = {
+	.demod_address		= 0x0f,
+};
+
+static struct tda665x_config env57h12d5_config = {
+	.name			= "ENV57H12D5 (ET-50DT)",
+	.addr			= 0x60,
+	.frequency_min		=  47 * MHz,
+	.frequency_max		= 862 * MHz,
+	.frequency_offst	=   3616667,
+	.ref_multiplier		= 6, /* 1/6 MHz */
+	.ref_divider		= 100000, /* 1/6 MHz */
+};
+
+#define MANTIS_MODEL_NAME	"VP-3030"
+#define MANTIS_DEV_TYPE		"DVB-T"
+
+
+static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
+{
+	struct i2c_adapter *adapter	= &mantis->adapter;
+	struct mantis_hwconfig *config	= mantis->hwconfig;
+	int err = 0;
+
+	mantis_gpio_set_bits(mantis, config->reset, 0);
+	msleep(100);
+	err = mantis_frontend_power(mantis, POWER_ON);
+	msleep(100);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
+
+	if (err == 0) {
+		msleep(250);
+		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
+		fe = dvb_attach(zl10353_attach, &mantis_vp3030_config, adapter);
+
+		if (!fe)
+			return -1;
+
+		dvb_attach(tda665x_attach, fe, &env57h12d5_config, adapter);
+	} else {
+		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
+			adapter->name,
+			err);
+
+		return -EIO;
+
+	}
+	mantis->fe = fe;
+	dprintk(MANTIS_ERROR, 1, "Done!");
+
+	return 0;
+}
+
+struct mantis_hwconfig vp3030_config = {
+	.model_name	= MANTIS_MODEL_NAME,
+	.dev_type	= MANTIS_DEV_TYPE,
+	.ts_size	= MANTIS_TS_188,
+
+	.baud_rate	= MANTIS_BAUD_9600,
+	.parity		= MANTIS_PARITY_NONE,
+	.bytes		= 0,
+
+	.frontend_init	= vp3030_frontend_init,
+	.power		= GPIF_A12,
+	.reset		= GPIF_A13,
+
+	.i2c_mode	= MANTIS_BYTE_MODE
+};