Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 374 insertions, 0 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
new file mode 100644
index 000000000..c57a0262f
--- /dev/null
+++ b/drivers/net/phy/Kconfig
@@ -0,0 +1,374 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PHY Layer Configuration
+#
+
+config PHYLINK
+	tristate
+	depends on NETDEVICES
+	select PHYLIB
+	select SWPHY
+	help
+	  PHYlink models the link between the PHY and MAC, allowing fixed
+	  configuration links, PHYs, and Serdes links with MAC level
+	  autonegotiation modes.
+
+menuconfig PHYLIB
+	tristate "PHY Device support and infrastructure"
+	depends on NETDEVICES
+	select MDIO_DEVICE
+	select MDIO_DEVRES
+	help
+	  Ethernet controllers are usually attached to PHY
+	  devices.  This option provides infrastructure for
+	  managing PHY devices.
+
+if PHYLIB
+
+config SWPHY
+	bool
+
+config LED_TRIGGER_PHY
+	bool "Support LED triggers for tracking link state"
+	depends on LEDS_TRIGGERS
+	help
+	  Adds support for a set of LED trigger events per-PHY.  Link
+	  state change will trigger the events, for consumption by an
+	  LED class driver.  There are triggers for each link speed currently
+	  supported by the PHY and also a one common "link" trigger as a
+	  logical-or of all the link speed ones.
+	  All these triggers are named according to the following pattern:
+	      <mii bus id>:<phy>:<speed>
+
+	  Where speed is in the form:
+		<Speed in megabits>Mbps OR <Speed in gigabits>Gbps OR link
+		for any speed known to the PHY.
+
+
+config FIXED_PHY
+	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
+	depends on PHYLIB
+	select SWPHY
+	help
+	  Adds the platform "fixed" MDIO Bus to cover the boards that use
+	  PHYs that are not connected to the real MDIO bus.
+
+	  Currently tested with mpc866ads and mpc8349e-mitx.
+
+config SFP
+	tristate "SFP cage support"
+	depends on I2C && PHYLINK
+	depends on HWMON || HWMON=n
+	select MDIO_I2C
+
+comment "MII PHY device drivers"
+
+config AMD_PHY
+	tristate "AMD PHYs"
+	help
+	  Currently supports the am79c874
+
+config MESON_GXL_PHY
+	tristate "Amlogic Meson GXL Internal PHY"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	  Currently has a driver for the Amlogic Meson GXL Internal PHY
+
+config ADIN_PHY
+	tristate "Analog Devices Industrial Ethernet PHYs"
+	help
+	  Adds support for the Analog Devices Industrial Ethernet PHYs.
+	  Currently supports the:
+	  - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY
+	  - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit
+	    Ethernet PHY
+
+config ADIN1100_PHY
+	tristate "Analog Devices Industrial Ethernet T1L PHYs"
+	help
+	  Adds support for the Analog Devices Industrial T1L Ethernet PHYs.
+	  Currently supports the:
+	  - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
+
+config AQUANTIA_PHY
+	tristate "Aquantia PHYs"
+	help
+	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+
+config AX88796B_PHY
+	tristate "Asix PHYs"
+	help
+	  Currently supports the Asix Electronics PHY found in the X-Surf 100
+	  AX88796B package.
+
+config BROADCOM_PHY
+	tristate "Broadcom 54XX PHYs"
+	select BCM_NET_PHYLIB
+	select BCM_NET_PHYPTP if NETWORK_PHY_TIMESTAMPING
+	depends on PTP_1588_CLOCK_OPTIONAL
+	help
+	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+	  BCM5481, BCM54810 and BCM5482 PHYs.
+
+config BCM54140_PHY
+	tristate "Broadcom BCM54140 PHY"
+	depends on PHYLIB
+	depends on HWMON || HWMON=n
+	select BCM_NET_PHYLIB
+	help
+	  Support the Broadcom BCM54140 Quad SGMII/QSGMII PHY.
+
+	  This driver also supports the hardware monitoring of this PHY and
+	  exposes voltage and temperature sensors.
+
+config BCM63XX_PHY
+	tristate "Broadcom 63xx SOCs internal PHY"
+	depends on BCM63XX || COMPILE_TEST
+	select BCM_NET_PHYLIB
+	help
+	  Currently supports the 6348 and 6358 PHYs.
+
+config BCM7XXX_PHY
+	tristate "Broadcom 7xxx SOCs internal PHYs"
+	select BCM_NET_PHYLIB
+	help
+	  Currently supports the BCM7366, BCM7439, BCM7445, and
+	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
+
+config BCM84881_PHY
+	tristate "Broadcom BCM84881 PHY"
+	depends on PHYLIB
+	help
+	  Support the Broadcom BCM84881 PHY.
+
+config BCM87XX_PHY
+	tristate "Broadcom BCM8706 and BCM8727 PHYs"
+	help
+	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
+
+config BCM_CYGNUS_PHY
+	tristate "Broadcom Cygnus/Omega SoC internal PHY"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on MDIO_BCM_IPROC
+	select BCM_NET_PHYLIB
+	help
+	  This PHY driver is for the 1G internal PHYs of the Broadcom
+	  Cygnus and Omega Family SoC.
+
+	  Currently supports internal PHY's used in the BCM11300,
+	  BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
+	  BCM58303 & BCM58305 Broadcom Cygnus SoCs.
+
+config BCM_NET_PHYLIB
+	tristate
+
+config BCM_NET_PHYPTP
+	tristate
+
+config CICADA_PHY
+	tristate "Cicada PHYs"
+	help
+	  Currently supports the cis8204
+
+config CORTINA_PHY
+	tristate "Cortina EDC CDR 10G Ethernet PHY"
+	help
+	  Currently supports the CS4340 phy.
+
+config DAVICOM_PHY
+	tristate "Davicom PHYs"
+	help
+	  Currently supports dm9161e and dm9131
+
+config ICPLUS_PHY
+	tristate "ICPlus PHYs"
+	help
+	  Currently supports the IP175C and IP1001 PHYs.
+
+config LXT_PHY
+	tristate "Intel LXT PHYs"
+	help
+	  Currently supports the lxt970, lxt971
+
+config INTEL_XWAY_PHY
+	tristate "Intel XWAY PHYs"
+	help
+	  Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
+	  These PHYs are marked as standalone chips under the names
+	  PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
+	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
+
+config LSI_ET1011C_PHY
+	tristate "LSI ET1011C PHY"
+	help
+	  Supports the LSI ET1011C PHY.
+
+config MARVELL_PHY
+	tristate "Marvell Alaska PHYs"
+	help
+	  Currently has a driver for the 88E1XXX
+
+config MARVELL_10G_PHY
+	tristate "Marvell Alaska 10Gbit PHYs"
+	help
+	  Support for the Marvell Alaska MV88X3310 and compatible PHYs.
+
+config MARVELL_88X2222_PHY
+	tristate "Marvell 88X2222 PHY"
+	help
+	  Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet
+	  Transceiver.
+
+config MAXLINEAR_GPHY
+	tristate "Maxlinear Ethernet PHYs"
+	select POLYNOMIAL if HWMON
+	depends on HWMON || HWMON=n
+	help
+	  Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
+	  GPY241, GPY245 PHYs.
+
+config MEDIATEK_GE_PHY
+	tristate "MediaTek Gigabit Ethernet PHYs"
+	help
+	  Supports the MediaTek Gigabit Ethernet PHYs.
+
+config MICREL_PHY
+	tristate "Micrel PHYs"
+	depends on PTP_1588_CLOCK_OPTIONAL
+	help
+	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
+config MICROCHIP_PHY
+	tristate "Microchip PHYs"
+	help
+	  Supports the LAN88XX PHYs.
+
+config MICROCHIP_T1_PHY
+	tristate "Microchip T1 PHYs"
+	help
+	  Supports the LAN87XX PHYs.
+
+config MICROSEMI_PHY
+	tristate "Microsemi PHYs"
+	depends on MACSEC || MACSEC=n
+	depends on PTP_1588_CLOCK_OPTIONAL || !NETWORK_PHY_TIMESTAMPING
+	select CRYPTO_LIB_AES if MACSEC
+	help
+	  Currently supports VSC8514, VSC8530, VSC8531, VSC8540 and VSC8541 PHYs
+
+config MOTORCOMM_PHY
+	tristate "Motorcomm PHYs"
+	help
+	  Enables support for Motorcomm network PHYs.
+	  Currently supports the YT8511 gigabit PHY.
+
+config NATIONAL_PHY
+	tristate "National Semiconductor PHYs"
+	help
+	  Currently supports the DP83865 PHY.
+
+config NXP_C45_TJA11XX_PHY
+	tristate "NXP C45 TJA11XX PHYs"
+	depends on PTP_1588_CLOCK_OPTIONAL
+	help
+	  Enable support for NXP C45 TJA11XX PHYs.
+	  Currently supports only the TJA1103 PHY.
+
+config NXP_TJA11XX_PHY
+	tristate "NXP TJA11xx PHYs support"
+	depends on HWMON
+	help
+	  Currently supports the NXP TJA1100 and TJA1101 PHY.
+
+config AT803X_PHY
+	tristate "Qualcomm Atheros AR803X PHYs and QCA833x PHYs"
+	depends on REGULATOR
+	help
+	  Currently supports the AR8030, AR8031, AR8033, AR8035 and internal
+	  QCA8337(Internal qca8k PHY) model
+
+config QSEMI_PHY
+	tristate "Quality Semiconductor PHYs"
+	help
+	  Currently supports the qs6612
+
+config REALTEK_PHY
+	tristate "Realtek PHYs"
+	help
+	  Supports the Realtek 821x PHY.
+
+config RENESAS_PHY
+	tristate "Renesas PHYs"
+	help
+	  Supports the Renesas PHYs uPD60620 and uPD60620A.
+
+config ROCKCHIP_PHY
+	tristate "Rockchip Ethernet PHYs"
+	help
+	  Currently supports the integrated Ethernet PHY.
+
+config SMSC_PHY
+	tristate "SMSC PHYs"
+	help
+	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+
+config STE10XP
+	tristate "STMicroelectronics STe10Xp PHYs"
+	help
+	  This is the driver for the STe100p and STe101p PHYs.
+
+config TERANETICS_PHY
+	tristate "Teranetics PHYs"
+	help
+	  Currently supports the Teranetics TN2020
+
+config DP83822_PHY
+	tristate "Texas Instruments DP83822/825/826 PHYs"
+	help
+	  Supports the DP83822, DP83825I, DP83825CM, DP83825CS, DP83825S,
+	  DP83826C and DP83826NC PHYs.
+
+config DP83TC811_PHY
+	tristate "Texas Instruments DP83TC811 PHY"
+	help
+	  Supports the DP83TC811 PHY.
+
+config DP83848_PHY
+	tristate "Texas Instruments DP83848 PHY"
+	help
+	  Supports the DP83848 PHY.
+
+config DP83867_PHY
+	tristate "Texas Instruments DP83867 Gigabit PHY"
+	help
+	  Currently supports the DP83867 PHY.
+
+config DP83869_PHY
+	tristate "Texas Instruments DP83869 Gigabit PHY"
+	help
+	  Currently supports the DP83869 PHY.  This PHY supports copper and
+	  fiber connections.
+
+config DP83TD510_PHY
+	tristate "Texas Instruments DP83TD510 Ethernet 10Base-T1L PHY"
+	help
+	  Support for the DP83TD510 Ethernet 10Base-T1L PHY. This PHY supports
+	  a 10M single pair Ethernet connection for up to 1000 meter cable.
+
+config VITESSE_PHY
+	tristate "Vitesse PHYs"
+	help
+	  Currently supports the vsc8244
+
+config XILINX_GMII2RGMII
+	tristate "Xilinx GMII2RGMII converter driver"
+	help
+	  This driver support xilinx GMII to RGMII IP core it provides
+	  the Reduced Gigabit Media Independent Interface(RGMII) between
+	  Ethernet physical media devices and the Gigabit Ethernet controller.
+
+endif # PHYLIB
+
+config MICREL_KS8995MA
+	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
+	depends on SPI