Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 998 insertions, 0 deletions

diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c
new file mode 100644
index 000000000..134637584
--- /dev/null
+++ b/drivers/net/phy/adin.c
@@ -0,0 +1,998 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *  Driver for Analog Devices Industrial Ethernet PHYs
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ethtool_netlink.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/property.h>
+
+#define PHY_ID_ADIN1200				0x0283bc20
+#define PHY_ID_ADIN1300				0x0283bc30
+
+#define ADIN1300_MII_EXT_REG_PTR		0x0010
+#define ADIN1300_MII_EXT_REG_DATA		0x0011
+
+#define ADIN1300_PHY_CTRL1			0x0012
+#define   ADIN1300_AUTO_MDI_EN			BIT(10)
+#define   ADIN1300_MAN_MDIX_EN			BIT(9)
+#define   ADIN1300_DIAG_CLK_EN			BIT(2)
+
+#define ADIN1300_RX_ERR_CNT			0x0014
+
+#define ADIN1300_PHY_CTRL_STATUS2		0x0015
+#define   ADIN1300_NRG_PD_EN			BIT(3)
+#define   ADIN1300_NRG_PD_TX_EN			BIT(2)
+#define   ADIN1300_NRG_PD_STATUS		BIT(1)
+
+#define ADIN1300_PHY_CTRL2			0x0016
+#define   ADIN1300_DOWNSPEED_AN_100_EN		BIT(11)
+#define   ADIN1300_DOWNSPEED_AN_10_EN		BIT(10)
+#define   ADIN1300_GROUP_MDIO_EN		BIT(6)
+#define   ADIN1300_DOWNSPEEDS_EN	\
+	(ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN)
+
+#define ADIN1300_PHY_CTRL3			0x0017
+#define   ADIN1300_LINKING_EN			BIT(13)
+#define   ADIN1300_DOWNSPEED_RETRIES_MSK	GENMASK(12, 10)
+
+#define ADIN1300_INT_MASK_REG			0x0018
+#define   ADIN1300_INT_MDIO_SYNC_EN		BIT(9)
+#define   ADIN1300_INT_ANEG_STAT_CHNG_EN	BIT(8)
+#define   ADIN1300_INT_ANEG_PAGE_RX_EN		BIT(6)
+#define   ADIN1300_INT_IDLE_ERR_CNT_EN		BIT(5)
+#define   ADIN1300_INT_MAC_FIFO_OU_EN		BIT(4)
+#define   ADIN1300_INT_RX_STAT_CHNG_EN		BIT(3)
+#define   ADIN1300_INT_LINK_STAT_CHNG_EN	BIT(2)
+#define   ADIN1300_INT_SPEED_CHNG_EN		BIT(1)
+#define   ADIN1300_INT_HW_IRQ_EN		BIT(0)
+#define ADIN1300_INT_MASK_EN	\
+	(ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN)
+#define ADIN1300_INT_STATUS_REG			0x0019
+
+#define ADIN1300_PHY_STATUS1			0x001a
+#define   ADIN1300_PAIR_01_SWAP			BIT(11)
+
+/* EEE register addresses, accessible via Clause 22 access using
+ * ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA.
+ * The bit-fields are the same as specified by IEEE for EEE.
+ */
+#define ADIN1300_EEE_CAP_REG			0x8000
+#define ADIN1300_EEE_ADV_REG			0x8001
+#define ADIN1300_EEE_LPABLE_REG			0x8002
+#define ADIN1300_CLOCK_STOP_REG			0x9400
+#define ADIN1300_LPI_WAKE_ERR_CNT_REG		0xa000
+
+#define ADIN1300_CDIAG_RUN			0xba1b
+#define   ADIN1300_CDIAG_RUN_EN			BIT(0)
+
+/*
+ * The XSIM3/2/1 and XSHRT3/2/1 are actually relative.
+ * For CDIAG_DTLD_RSLTS(0) it's ADIN1300_CDIAG_RSLT_XSIM3/2/1
+ * For CDIAG_DTLD_RSLTS(1) it's ADIN1300_CDIAG_RSLT_XSIM3/2/0
+ * For CDIAG_DTLD_RSLTS(2) it's ADIN1300_CDIAG_RSLT_XSIM3/1/0
+ * For CDIAG_DTLD_RSLTS(3) it's ADIN1300_CDIAG_RSLT_XSIM2/1/0
+ */
+#define ADIN1300_CDIAG_DTLD_RSLTS(x)		(0xba1d + (x))
+#define   ADIN1300_CDIAG_RSLT_BUSY		BIT(10)
+#define   ADIN1300_CDIAG_RSLT_XSIM3		BIT(9)
+#define   ADIN1300_CDIAG_RSLT_XSIM2		BIT(8)
+#define   ADIN1300_CDIAG_RSLT_XSIM1		BIT(7)
+#define   ADIN1300_CDIAG_RSLT_SIM		BIT(6)
+#define   ADIN1300_CDIAG_RSLT_XSHRT3		BIT(5)
+#define   ADIN1300_CDIAG_RSLT_XSHRT2		BIT(4)
+#define   ADIN1300_CDIAG_RSLT_XSHRT1		BIT(3)
+#define   ADIN1300_CDIAG_RSLT_SHRT		BIT(2)
+#define   ADIN1300_CDIAG_RSLT_OPEN		BIT(1)
+#define   ADIN1300_CDIAG_RSLT_GOOD		BIT(0)
+
+#define ADIN1300_CDIAG_FLT_DIST(x)		(0xba21 + (x))
+
+#define ADIN1300_GE_SOFT_RESET_REG		0xff0c
+#define   ADIN1300_GE_SOFT_RESET		BIT(0)
+
+#define ADIN1300_GE_CLK_CFG_REG			0xff1f
+#define   ADIN1300_GE_CLK_CFG_MASK		GENMASK(5, 0)
+#define   ADIN1300_GE_CLK_CFG_RCVR_125		BIT(5)
+#define   ADIN1300_GE_CLK_CFG_FREE_125		BIT(4)
+#define   ADIN1300_GE_CLK_CFG_REF_EN		BIT(3)
+#define   ADIN1300_GE_CLK_CFG_HRT_RCVR		BIT(2)
+#define   ADIN1300_GE_CLK_CFG_HRT_FREE		BIT(1)
+#define   ADIN1300_GE_CLK_CFG_25		BIT(0)
+
+#define ADIN1300_GE_RGMII_CFG_REG		0xff23
+#define   ADIN1300_GE_RGMII_RX_MSK		GENMASK(8, 6)
+#define   ADIN1300_GE_RGMII_RX_SEL(x)		\
+		FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x)
+#define   ADIN1300_GE_RGMII_GTX_MSK		GENMASK(5, 3)
+#define   ADIN1300_GE_RGMII_GTX_SEL(x)		\
+		FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x)
+#define   ADIN1300_GE_RGMII_RXID_EN		BIT(2)
+#define   ADIN1300_GE_RGMII_TXID_EN		BIT(1)
+#define   ADIN1300_GE_RGMII_EN			BIT(0)
+
+/* RGMII internal delay settings for rx and tx for ADIN1300 */
+#define ADIN1300_RGMII_1_60_NS			0x0001
+#define ADIN1300_RGMII_1_80_NS			0x0002
+#define	ADIN1300_RGMII_2_00_NS			0x0000
+#define	ADIN1300_RGMII_2_20_NS			0x0006
+#define	ADIN1300_RGMII_2_40_NS			0x0007
+
+#define ADIN1300_GE_RMII_CFG_REG		0xff24
+#define   ADIN1300_GE_RMII_FIFO_DEPTH_MSK	GENMASK(6, 4)
+#define   ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x)	\
+		FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x)
+#define   ADIN1300_GE_RMII_EN			BIT(0)
+
+/* RMII fifo depth values */
+#define ADIN1300_RMII_4_BITS			0x0000
+#define ADIN1300_RMII_8_BITS			0x0001
+#define ADIN1300_RMII_12_BITS			0x0002
+#define ADIN1300_RMII_16_BITS			0x0003
+#define ADIN1300_RMII_20_BITS			0x0004
+#define ADIN1300_RMII_24_BITS			0x0005
+
+/**
+ * struct adin_cfg_reg_map - map a config value to aregister value
+ * @cfg:	value in device configuration
+ * @reg:	value in the register
+ */
+struct adin_cfg_reg_map {
+	int cfg;
+	int reg;
+};
+
+static const struct adin_cfg_reg_map adin_rgmii_delays[] = {
+	{ 1600, ADIN1300_RGMII_1_60_NS },
+	{ 1800, ADIN1300_RGMII_1_80_NS },
+	{ 2000, ADIN1300_RGMII_2_00_NS },
+	{ 2200, ADIN1300_RGMII_2_20_NS },
+	{ 2400, ADIN1300_RGMII_2_40_NS },
+	{ },
+};
+
+static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = {
+	{ 4,  ADIN1300_RMII_4_BITS },
+	{ 8,  ADIN1300_RMII_8_BITS },
+	{ 12, ADIN1300_RMII_12_BITS },
+	{ 16, ADIN1300_RMII_16_BITS },
+	{ 20, ADIN1300_RMII_20_BITS },
+	{ 24, ADIN1300_RMII_24_BITS },
+	{ },
+};
+
+/**
+ * struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22
+ * @devad:		device address used in Clause 45 access
+ * @cl45_regnum:	register address defined by Clause 45
+ * @adin_regnum:	equivalent register address accessible via Clause 22
+ */
+struct adin_clause45_mmd_map {
+	int devad;
+	u16 cl45_regnum;
+	u16 adin_regnum;
+};
+
+static const struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
+	{ MDIO_MMD_PCS,	MDIO_PCS_EEE_ABLE,	ADIN1300_EEE_CAP_REG },
+	{ MDIO_MMD_AN,	MDIO_AN_EEE_LPABLE,	ADIN1300_EEE_LPABLE_REG },
+	{ MDIO_MMD_AN,	MDIO_AN_EEE_ADV,	ADIN1300_EEE_ADV_REG },
+	{ MDIO_MMD_PCS,	MDIO_CTRL1,		ADIN1300_CLOCK_STOP_REG },
+	{ MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR,	ADIN1300_LPI_WAKE_ERR_CNT_REG },
+};
+
+struct adin_hw_stat {
+	const char *string;
+	u16 reg1;
+	u16 reg2;
+};
+
+static const struct adin_hw_stat adin_hw_stats[] = {
+	{ "total_frames_checked_count",		0x940A, 0x940B }, /* hi + lo */
+	{ "length_error_frames_count",		0x940C },
+	{ "alignment_error_frames_count",	0x940D },
+	{ "symbol_error_count",			0x940E },
+	{ "oversized_frames_count",		0x940F },
+	{ "undersized_frames_count",		0x9410 },
+	{ "odd_nibble_frames_count",		0x9411 },
+	{ "odd_preamble_packet_count",		0x9412 },
+	{ "dribble_bits_frames_count",		0x9413 },
+	{ "false_carrier_events_count",		0x9414 },
+};
+
+/**
+ * struct adin_priv - ADIN PHY driver private data
+ * @stats:		statistic counters for the PHY
+ */
+struct adin_priv {
+	u64			stats[ARRAY_SIZE(adin_hw_stats)];
+};
+
+static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg)
+{
+	size_t i;
+
+	for (i = 0; tbl[i].cfg; i++) {
+		if (tbl[i].cfg == cfg)
+			return tbl[i].reg;
+	}
+
+	return -EINVAL;
+}
+
+static u32 adin_get_reg_value(struct phy_device *phydev,
+			      const char *prop_name,
+			      const struct adin_cfg_reg_map *tbl,
+			      u32 dflt)
+{
+	struct device *dev = &phydev->mdio.dev;
+	u32 val;
+	int rc;
+
+	if (device_property_read_u32(dev, prop_name, &val))
+		return dflt;
+
+	rc = adin_lookup_reg_value(tbl, val);
+	if (rc < 0) {
+		phydev_warn(phydev,
+			    "Unsupported value %u for %s using default (%u)\n",
+			    val, prop_name, dflt);
+		return dflt;
+	}
+
+	return rc;
+}
+
+static int adin_config_rgmii_mode(struct phy_device *phydev)
+{
+	u32 val;
+	int reg;
+
+	if (!phy_interface_is_rgmii(phydev))
+		return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+					  ADIN1300_GE_RGMII_CFG_REG,
+					  ADIN1300_GE_RGMII_EN);
+
+	reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG);
+	if (reg < 0)
+		return reg;
+
+	reg |= ADIN1300_GE_RGMII_EN;
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		reg |= ADIN1300_GE_RGMII_RXID_EN;
+
+		val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps",
+					 adin_rgmii_delays,
+					 ADIN1300_RGMII_2_00_NS);
+		reg &= ~ADIN1300_GE_RGMII_RX_MSK;
+		reg |= ADIN1300_GE_RGMII_RX_SEL(val);
+	} else {
+		reg &= ~ADIN1300_GE_RGMII_RXID_EN;
+	}
+
+	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+		reg |= ADIN1300_GE_RGMII_TXID_EN;
+
+		val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps",
+					 adin_rgmii_delays,
+					 ADIN1300_RGMII_2_00_NS);
+		reg &= ~ADIN1300_GE_RGMII_GTX_MSK;
+		reg |= ADIN1300_GE_RGMII_GTX_SEL(val);
+	} else {
+		reg &= ~ADIN1300_GE_RGMII_TXID_EN;
+	}
+
+	return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+			     ADIN1300_GE_RGMII_CFG_REG, reg);
+}
+
+static int adin_config_rmii_mode(struct phy_device *phydev)
+{
+	u32 val;
+	int reg;
+
+	if (phydev->interface != PHY_INTERFACE_MODE_RMII)
+		return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+					  ADIN1300_GE_RMII_CFG_REG,
+					  ADIN1300_GE_RMII_EN);
+
+	reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG);
+	if (reg < 0)
+		return reg;
+
+	reg |= ADIN1300_GE_RMII_EN;
+
+	val = adin_get_reg_value(phydev, "adi,fifo-depth-bits",
+				 adin_rmii_fifo_depths,
+				 ADIN1300_RMII_8_BITS);
+
+	reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK;
+	reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val);
+
+	return phy_write_mmd(phydev, MDIO_MMD_VEND1,
+			     ADIN1300_GE_RMII_CFG_REG, reg);
+}
+
+static int adin_get_downshift(struct phy_device *phydev, u8 *data)
+{
+	int val, cnt, enable;
+
+	val = phy_read(phydev, ADIN1300_PHY_CTRL2);
+	if (val < 0)
+		return val;
+
+	cnt = phy_read(phydev, ADIN1300_PHY_CTRL3);
+	if (cnt < 0)
+		return cnt;
+
+	enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val);
+	cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
+
+	*data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE;
+
+	return 0;
+}
+
+static int adin_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+	u16 val;
+	int rc;
+
+	if (cnt == DOWNSHIFT_DEV_DISABLE)
+		return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2,
+				      ADIN1300_DOWNSPEEDS_EN);
+
+	if (cnt > 7)
+		return -E2BIG;
+
+	val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt);
+
+	rc = phy_modify(phydev, ADIN1300_PHY_CTRL3,
+			ADIN1300_DOWNSPEED_RETRIES_MSK,
+			val);
+	if (rc < 0)
+		return rc;
+
+	return phy_set_bits(phydev, ADIN1300_PHY_CTRL2,
+			    ADIN1300_DOWNSPEEDS_EN);
+}
+
+static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval)
+{
+	int val;
+
+	val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2);
+	if (val < 0)
+		return val;
+
+	if (ADIN1300_NRG_PD_EN & val) {
+		if (val & ADIN1300_NRG_PD_TX_EN)
+			/* default is 1 second */
+			*tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS;
+		else
+			*tx_interval = ETHTOOL_PHY_EDPD_NO_TX;
+	} else {
+		*tx_interval = ETHTOOL_PHY_EDPD_DISABLE;
+	}
+
+	return 0;
+}
+
+static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval)
+{
+	u16 val;
+
+	if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE)
+		return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2,
+				(ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN));
+
+	val = ADIN1300_NRG_PD_EN;
+
+	switch (tx_interval) {
+	case 1000: /* 1 second */
+		fallthrough;
+	case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS:
+		val |= ADIN1300_NRG_PD_TX_EN;
+		fallthrough;
+	case ETHTOOL_PHY_EDPD_NO_TX:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2,
+			  (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN),
+			  val);
+}
+
+static int adin_get_tunable(struct phy_device *phydev,
+			    struct ethtool_tunable *tuna, void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return adin_get_downshift(phydev, data);
+	case ETHTOOL_PHY_EDPD:
+		return adin_get_edpd(phydev, data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int adin_set_tunable(struct phy_device *phydev,
+			    struct ethtool_tunable *tuna, const void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return adin_set_downshift(phydev, *(const u8 *)data);
+	case ETHTOOL_PHY_EDPD:
+		return adin_set_edpd(phydev, *(const u16 *)data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int adin_config_clk_out(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	const char *val = NULL;
+	u8 sel = 0;
+
+	device_property_read_string(dev, "adi,phy-output-clock", &val);
+	if (!val) {
+		/* property not present, do not enable GP_CLK pin */
+	} else if (strcmp(val, "25mhz-reference") == 0) {
+		sel |= ADIN1300_GE_CLK_CFG_25;
+	} else if (strcmp(val, "125mhz-free-running") == 0) {
+		sel |= ADIN1300_GE_CLK_CFG_FREE_125;
+	} else if (strcmp(val, "adaptive-free-running") == 0) {
+		sel |= ADIN1300_GE_CLK_CFG_HRT_FREE;
+	} else {
+		phydev_err(phydev, "invalid adi,phy-output-clock\n");
+		return -EINVAL;
+	}
+
+	if (device_property_read_bool(dev, "adi,phy-output-reference-clock"))
+		sel |= ADIN1300_GE_CLK_CFG_REF_EN;
+
+	return phy_modify_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_CLK_CFG_REG,
+			      ADIN1300_GE_CLK_CFG_MASK, sel);
+}
+
+static int adin_config_init(struct phy_device *phydev)
+{
+	int rc;
+
+	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+
+	rc = adin_config_rgmii_mode(phydev);
+	if (rc < 0)
+		return rc;
+
+	rc = adin_config_rmii_mode(phydev);
+	if (rc < 0)
+		return rc;
+
+	rc = adin_set_downshift(phydev, 4);
+	if (rc < 0)
+		return rc;
+
+	rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
+	if (rc < 0)
+		return rc;
+
+	rc = adin_config_clk_out(phydev);
+	if (rc < 0)
+		return rc;
+
+	phydev_dbg(phydev, "PHY is using mode '%s'\n",
+		   phy_modes(phydev->interface));
+
+	return 0;
+}
+
+static int adin_phy_ack_intr(struct phy_device *phydev)
+{
+	/* Clear pending interrupts */
+	int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG);
+
+	return rc < 0 ? rc : 0;
+}
+
+static int adin_phy_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		err = adin_phy_ack_intr(phydev);
+		if (err)
+			return err;
+
+		err = phy_set_bits(phydev, ADIN1300_INT_MASK_REG,
+				   ADIN1300_INT_MASK_EN);
+	} else {
+		err = phy_clear_bits(phydev, ADIN1300_INT_MASK_REG,
+				     ADIN1300_INT_MASK_EN);
+		if (err)
+			return err;
+
+		err = adin_phy_ack_intr(phydev);
+	}
+
+	return err;
+}
+
+static irqreturn_t adin_phy_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status;
+
+	irq_status = phy_read(phydev, ADIN1300_INT_STATUS_REG);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	if (!(irq_status & ADIN1300_INT_LINK_STAT_CHNG_EN))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+
+static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad,
+				 u16 cl45_regnum)
+{
+	const struct adin_clause45_mmd_map *m;
+	int i;
+
+	if (devad == MDIO_MMD_VEND1)
+		return cl45_regnum;
+
+	for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) {
+		m = &adin_clause45_mmd_map[i];
+		if (m->devad == devad && m->cl45_regnum == cl45_regnum)
+			return m->adin_regnum;
+	}
+
+	phydev_err(phydev,
+		   "No translation available for devad: %d reg: %04x\n",
+		   devad, cl45_regnum);
+
+	return -EINVAL;
+}
+
+static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int phy_addr = phydev->mdio.addr;
+	int adin_regnum;
+	int err;
+
+	adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
+	if (adin_regnum < 0)
+		return adin_regnum;
+
+	err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
+			      adin_regnum);
+	if (err)
+		return err;
+
+	return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA);
+}
+
+static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum,
+			  u16 val)
+{
+	struct mii_bus *bus = phydev->mdio.bus;
+	int phy_addr = phydev->mdio.addr;
+	int adin_regnum;
+	int err;
+
+	adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum);
+	if (adin_regnum < 0)
+		return adin_regnum;
+
+	err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR,
+			      adin_regnum);
+	if (err)
+		return err;
+
+	return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val);
+}
+
+static int adin_config_mdix(struct phy_device *phydev)
+{
+	bool auto_en, mdix_en;
+	int reg;
+
+	mdix_en = false;
+	auto_en = false;
+	switch (phydev->mdix_ctrl) {
+	case ETH_TP_MDI:
+		break;
+	case ETH_TP_MDI_X:
+		mdix_en = true;
+		break;
+	case ETH_TP_MDI_AUTO:
+		auto_en = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
+	if (reg < 0)
+		return reg;
+
+	if (mdix_en)
+		reg |= ADIN1300_MAN_MDIX_EN;
+	else
+		reg &= ~ADIN1300_MAN_MDIX_EN;
+
+	if (auto_en)
+		reg |= ADIN1300_AUTO_MDI_EN;
+	else
+		reg &= ~ADIN1300_AUTO_MDI_EN;
+
+	return phy_write(phydev, ADIN1300_PHY_CTRL1, reg);
+}
+
+static int adin_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL1, ADIN1300_DIAG_CLK_EN);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_set_bits(phydev, ADIN1300_PHY_CTRL3, ADIN1300_LINKING_EN);
+	if (ret < 0)
+		return ret;
+
+	ret = adin_config_mdix(phydev);
+	if (ret)
+		return ret;
+
+	return genphy_config_aneg(phydev);
+}
+
+static int adin_mdix_update(struct phy_device *phydev)
+{
+	bool auto_en, mdix_en;
+	bool swapped;
+	int reg;
+
+	reg = phy_read(phydev, ADIN1300_PHY_CTRL1);
+	if (reg < 0)
+		return reg;
+
+	auto_en = !!(reg & ADIN1300_AUTO_MDI_EN);
+	mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN);
+
+	/* If MDI/MDIX is forced, just read it from the control reg */
+	if (!auto_en) {
+		if (mdix_en)
+			phydev->mdix = ETH_TP_MDI_X;
+		else
+			phydev->mdix = ETH_TP_MDI;
+		return 0;
+	}
+
+	/**
+	 * Otherwise, we need to deduce it from the PHY status2 reg.
+	 * When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies
+	 * a preference for MDIX when it is set.
+	 */
+	reg = phy_read(phydev, ADIN1300_PHY_STATUS1);
+	if (reg < 0)
+		return reg;
+
+	swapped = !!(reg & ADIN1300_PAIR_01_SWAP);
+
+	if (mdix_en != swapped)
+		phydev->mdix = ETH_TP_MDI_X;
+	else
+		phydev->mdix = ETH_TP_MDI;
+
+	return 0;
+}
+
+static int adin_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = adin_mdix_update(phydev);
+	if (ret < 0)
+		return ret;
+
+	return genphy_read_status(phydev);
+}
+
+static int adin_soft_reset(struct phy_device *phydev)
+{
+	int rc;
+
+	/* The reset bit is self-clearing, set it and wait */
+	rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+			      ADIN1300_GE_SOFT_RESET_REG,
+			      ADIN1300_GE_SOFT_RESET);
+	if (rc < 0)
+		return rc;
+
+	msleep(20);
+
+	/* If we get a read error something may be wrong */
+	rc = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+			  ADIN1300_GE_SOFT_RESET_REG);
+
+	return rc < 0 ? rc : 0;
+}
+
+static int adin_get_sset_count(struct phy_device *phydev)
+{
+	return ARRAY_SIZE(adin_hw_stats);
+}
+
+static void adin_get_strings(struct phy_device *phydev, u8 *data)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) {
+		strscpy(&data[i * ETH_GSTRING_LEN],
+			adin_hw_stats[i].string, ETH_GSTRING_LEN);
+	}
+}
+
+static int adin_read_mmd_stat_regs(struct phy_device *phydev,
+				   const struct adin_hw_stat *stat,
+				   u32 *val)
+{
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1);
+	if (ret < 0)
+		return ret;
+
+	*val = (ret & 0xffff);
+
+	if (stat->reg2 == 0)
+		return 0;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2);
+	if (ret < 0)
+		return ret;
+
+	*val <<= 16;
+	*val |= (ret & 0xffff);
+
+	return 0;
+}
+
+static u64 adin_get_stat(struct phy_device *phydev, int i)
+{
+	const struct adin_hw_stat *stat = &adin_hw_stats[i];
+	struct adin_priv *priv = phydev->priv;
+	u32 val;
+	int ret;
+
+	if (stat->reg1 > 0x1f) {
+		ret = adin_read_mmd_stat_regs(phydev, stat, &val);
+		if (ret < 0)
+			return (u64)(~0);
+	} else {
+		ret = phy_read(phydev, stat->reg1);
+		if (ret < 0)
+			return (u64)(~0);
+		val = (ret & 0xffff);
+	}
+
+	priv->stats[i] += val;
+
+	return priv->stats[i];
+}
+
+static void adin_get_stats(struct phy_device *phydev,
+			   struct ethtool_stats *stats, u64 *data)
+{
+	int i, rc;
+
+	/* latch copies of all the frame-checker counters */
+	rc = phy_read(phydev, ADIN1300_RX_ERR_CNT);
+	if (rc < 0)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++)
+		data[i] = adin_get_stat(phydev, i);
+}
+
+static int adin_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct adin_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
+static int adin_cable_test_start(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL3, ADIN1300_LINKING_EN);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_clear_bits(phydev, ADIN1300_PHY_CTRL1, ADIN1300_DIAG_CLK_EN);
+	if (ret < 0)
+		return ret;
+
+	/* wait a bit for the clock to stabilize */
+	msleep(50);
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN,
+				ADIN1300_CDIAG_RUN_EN);
+}
+
+static int adin_cable_test_report_trans(int result)
+{
+	int mask;
+
+	if (result & ADIN1300_CDIAG_RSLT_GOOD)
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	if (result & ADIN1300_CDIAG_RSLT_OPEN)
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+
+	/* short with other pairs */
+	mask = ADIN1300_CDIAG_RSLT_XSHRT3 |
+	       ADIN1300_CDIAG_RSLT_XSHRT2 |
+	       ADIN1300_CDIAG_RSLT_XSHRT1;
+	if (result & mask)
+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
+
+	if (result & ADIN1300_CDIAG_RSLT_SHRT)
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+
+	return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+}
+
+static int adin_cable_test_report_pair(struct phy_device *phydev,
+				       unsigned int pair)
+{
+	int fault_rslt;
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+			   ADIN1300_CDIAG_DTLD_RSLTS(pair));
+	if (ret < 0)
+		return ret;
+
+	fault_rslt = adin_cable_test_report_trans(ret);
+
+	ret = ethnl_cable_test_result(phydev, pair, fault_rslt);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1,
+			   ADIN1300_CDIAG_FLT_DIST(pair));
+	if (ret < 0)
+		return ret;
+
+	switch (fault_rslt) {
+	case ETHTOOL_A_CABLE_RESULT_CODE_OPEN:
+	case ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT:
+	case ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT:
+		return ethnl_cable_test_fault_length(phydev, pair, ret * 100);
+	default:
+		return  0;
+	}
+}
+
+static int adin_cable_test_report(struct phy_device *phydev)
+{
+	unsigned int pair;
+	int ret;
+
+	for (pair = ETHTOOL_A_CABLE_PAIR_A; pair <= ETHTOOL_A_CABLE_PAIR_D; pair++) {
+		ret = adin_cable_test_report_pair(phydev, pair);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int adin_cable_test_get_status(struct phy_device *phydev,
+				      bool *finished)
+{
+	int ret;
+
+	*finished = false;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_CDIAG_RUN);
+	if (ret < 0)
+		return ret;
+
+	if (ret & ADIN1300_CDIAG_RUN_EN)
+		return 0;
+
+	*finished = true;
+
+	return adin_cable_test_report(phydev);
+}
+
+static struct phy_driver adin_driver[] = {
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200),
+		.name		= "ADIN1200",
+		.flags		= PHY_POLL_CABLE_TEST,
+		.probe		= adin_probe,
+		.config_init	= adin_config_init,
+		.soft_reset	= adin_soft_reset,
+		.config_aneg	= adin_config_aneg,
+		.read_status	= adin_read_status,
+		.get_tunable	= adin_get_tunable,
+		.set_tunable	= adin_set_tunable,
+		.config_intr	= adin_phy_config_intr,
+		.handle_interrupt = adin_phy_handle_interrupt,
+		.get_sset_count	= adin_get_sset_count,
+		.get_strings	= adin_get_strings,
+		.get_stats	= adin_get_stats,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.read_mmd	= adin_read_mmd,
+		.write_mmd	= adin_write_mmd,
+		.cable_test_start	= adin_cable_test_start,
+		.cable_test_get_status	= adin_cable_test_get_status,
+	},
+	{
+		PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300),
+		.name		= "ADIN1300",
+		.flags		= PHY_POLL_CABLE_TEST,
+		.probe		= adin_probe,
+		.config_init	= adin_config_init,
+		.soft_reset	= adin_soft_reset,
+		.config_aneg	= adin_config_aneg,
+		.read_status	= adin_read_status,
+		.get_tunable	= adin_get_tunable,
+		.set_tunable	= adin_set_tunable,
+		.config_intr	= adin_phy_config_intr,
+		.handle_interrupt = adin_phy_handle_interrupt,
+		.get_sset_count	= adin_get_sset_count,
+		.get_strings	= adin_get_strings,
+		.get_stats	= adin_get_stats,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.read_mmd	= adin_read_mmd,
+		.write_mmd	= adin_write_mmd,
+		.cable_test_start	= adin_cable_test_start,
+		.cable_test_get_status	= adin_cable_test_get_status,
+	},
+};
+
+module_phy_driver(adin_driver);
+
+static struct mdio_device_id __maybe_unused adin_tbl[] = {
+	{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(mdio, adin_tbl);
+MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver");
+MODULE_LICENSE("GPL");