Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1714 insertions, 0 deletions

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
new file mode 100644
index 000000000..f595204f4
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -0,0 +1,1714 @@
+/*
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _ATH5K_H
+#define _ATH5K_H
+
+/* TODO: Clean up channel debugging (doesn't work anyway) and start
+ * working on reg. control code using all available eeprom information
+ * (rev. engineering needed) */
+#define CHAN_DEBUG	0
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/average.h>
+#include <linux/leds.h>
+#include <net/mac80211.h>
+#include <net/cfg80211.h>
+
+/* RX/TX descriptor hw structs
+ * TODO: Driver part should only see sw structs */
+#include "desc.h"
+
+/* EEPROM structs/offsets
+ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
+ * and clean up common bits, then introduce set/get functions in eeprom.c */
+#include "eeprom.h"
+#include "debug.h"
+#include "../ath.h"
+#include "ani.h"
+
+/* PCI IDs */
+#define PCI_DEVICE_ID_ATHEROS_AR5210		0x0007 /* AR5210 */
+#define PCI_DEVICE_ID_ATHEROS_AR5311		0x0011 /* AR5311 */
+#define PCI_DEVICE_ID_ATHEROS_AR5211		0x0012 /* AR5211 */
+#define PCI_DEVICE_ID_ATHEROS_AR5212		0x0013 /* AR5212 */
+#define PCI_DEVICE_ID_3COM_3CRDAG675		0x0013 /* 3CRDAG675 (Atheros AR5212) */
+#define PCI_DEVICE_ID_3COM_2_3CRPAG175		0x0013 /* 3CRPAG175 (Atheros AR5212) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_AP		0x0207 /* AR5210 (Early) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_IBM	0x1014 /* AR5212 (IBM MiniPCI) */
+#define PCI_DEVICE_ID_ATHEROS_AR5210_DEFAULT	0x1107 /* AR5210 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_DEFAULT	0x1113 /* AR5212 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_DEFAULT	0x1112 /* AR5211 (no eeprom) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_FPGA	0xf013 /* AR5212 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_LEGACY	0xff12 /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5211_FPGA11B	0xf11b /* AR5211 (emulation board) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV2	0x0052 /* AR5312 WMAC (AP31) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV7	0x0057 /* AR5312 WMAC (AP30-040) */
+#define PCI_DEVICE_ID_ATHEROS_AR5312_REV8	0x0058 /* AR5312 WMAC (AP43-030) */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0014	0x0014 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0015	0x0015 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0016	0x0016 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0017	0x0017 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0018	0x0018 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR5212_0019	0x0019 /* AR5212 compatible */
+#define PCI_DEVICE_ID_ATHEROS_AR2413		0x001a /* AR2413 (Griffin-lite) */
+#define PCI_DEVICE_ID_ATHEROS_AR5413		0x001b /* AR5413 (Eagle) */
+#define PCI_DEVICE_ID_ATHEROS_AR5424		0x001c /* AR5424 (Condor PCI-E) */
+#define PCI_DEVICE_ID_ATHEROS_AR5416		0x0023 /* AR5416 */
+#define PCI_DEVICE_ID_ATHEROS_AR5418		0x0024 /* AR5418 */
+
+/****************************\
+  GENERIC DRIVER DEFINITIONS
+\****************************/
+
+#define ATH5K_PRINTF(fmt, ...)						\
+	pr_warn("%s: " fmt, __func__, ##__VA_ARGS__)
+
+void __printf(3, 4)
+_ath5k_printk(const struct ath5k_hw *ah, const char *level,
+	      const char *fmt, ...);
+
+#define ATH5K_PRINTK(_sc, _level, _fmt, ...)				\
+	_ath5k_printk(_sc, _level, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...)			\
+do {									\
+	if (net_ratelimit())						\
+		ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); 	\
+} while (0)
+
+#define ATH5K_INFO(_sc, _fmt, ...)					\
+	ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_WARN(_sc, _fmt, ...)					\
+	ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_ERR(_sc, _fmt, ...)					\
+	ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
+
+/*
+ * AR5K REGISTER ACCESS
+ */
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define AR5K_REG_SM(_val, _flags)					\
+	(((_val) << _flags##_S) & (_flags))
+
+/* First mask, then shift */
+#define AR5K_REG_MS(_val, _flags)					\
+	(((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)			\
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+	    (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)			\
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &		\
+			(_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)				\
+	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)			\
+	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+/* Access QCU registers per queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue)				\
+	(ath5k_hw_reg_read(ah, _reg) & (1 << _queue))			\
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue)				\
+	ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {				\
+	_reg |= 1 << _queue;						\
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {				\
+	_reg &= ~(1 << _queue);						\
+} while (0)
+
+/* Used while writing initvals */
+#define AR5K_REG_WAIT(_i) do {						\
+	if (_i % 64)							\
+		udelay(1);						\
+} while (0)
+
+/*
+ * Some tunable values (these should be changeable by the user)
+ * TODO: Make use of them and add more options OR use debug/configfs
+ */
+#define AR5K_TUNE_DMA_BEACON_RESP		2
+#define AR5K_TUNE_SW_BEACON_RESP		10
+#define AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF	0
+#define AR5K_TUNE_MIN_TX_FIFO_THRES		1
+#define AR5K_TUNE_MAX_TX_FIFO_THRES	((IEEE80211_MAX_FRAME_LEN / 64) + 1)
+#define AR5K_TUNE_REGISTER_TIMEOUT		20000
+/* Register for RSSI threshold has a mask of 0xff, so 255 seems to
+ * be the max value. */
+#define AR5K_TUNE_RSSI_THRES			129
+/* This must be set when setting the RSSI threshold otherwise it can
+ * prevent a reset. If AR5K_RSSI_THR is read after writing to it
+ * the BMISS_THRES will be seen as 0, seems hardware doesn't keep
+ * track of it. Max value depends on hardware. For AR5210 this is just 7.
+ * For AR5211+ this seems to be up to 255. */
+#define AR5K_TUNE_BMISS_THRES			7
+#define AR5K_TUNE_REGISTER_DWELL_TIME		20000
+#define AR5K_TUNE_BEACON_INTERVAL		100
+#define AR5K_TUNE_AIFS				2
+#define AR5K_TUNE_AIFS_11B			2
+#define AR5K_TUNE_AIFS_XR			0
+#define AR5K_TUNE_CWMIN				15
+#define AR5K_TUNE_CWMIN_11B			31
+#define AR5K_TUNE_CWMIN_XR			3
+#define AR5K_TUNE_CWMAX				1023
+#define AR5K_TUNE_CWMAX_11B			1023
+#define AR5K_TUNE_CWMAX_XR			7
+#define AR5K_TUNE_NOISE_FLOOR			-72
+#define AR5K_TUNE_CCA_MAX_GOOD_VALUE		-95
+#define AR5K_TUNE_MAX_TXPOWER			63
+#define AR5K_TUNE_DEFAULT_TXPOWER		25
+#define AR5K_TUNE_TPC_TXPOWER			false
+#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL    60000   /* 60 sec */
+#define	ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT	10000	/* 10 sec */
+#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI	1000	/* 1 sec */
+#define ATH5K_TX_COMPLETE_POLL_INT		3000	/* 3 sec */
+
+#define AR5K_INIT_CARR_SENSE_EN			1
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG	(		\
+	AR5K_CFG_SWTD | AR5K_CFG_SWRD	\
+)
+#else
+#define AR5K_INIT_CFG	0x00000000
+#endif
+
+/* Initial values */
+#define	AR5K_INIT_CYCRSSI_THR1			2
+
+/* Tx retry limit defaults from standard */
+#define AR5K_INIT_RETRY_SHORT			7
+#define AR5K_INIT_RETRY_LONG			4
+
+/* Slot time */
+#define AR5K_INIT_SLOT_TIME_TURBO		6
+#define AR5K_INIT_SLOT_TIME_DEFAULT		9
+#define	AR5K_INIT_SLOT_TIME_HALF_RATE		13
+#define	AR5K_INIT_SLOT_TIME_QUARTER_RATE	21
+#define	AR5K_INIT_SLOT_TIME_B			20
+#define AR5K_SLOT_TIME_MAX			0xffff
+
+/* SIFS */
+#define	AR5K_INIT_SIFS_TURBO			6
+#define	AR5K_INIT_SIFS_DEFAULT_BG		10
+#define	AR5K_INIT_SIFS_DEFAULT_A		16
+#define	AR5K_INIT_SIFS_HALF_RATE		32
+#define AR5K_INIT_SIFS_QUARTER_RATE		64
+
+/* Used to calculate tx time for non 5/10/40MHz
+ * operation */
+/* It's preamble time + signal time (16 + 4) */
+#define	AR5K_INIT_OFDM_PREAMPLE_TIME		20
+/* Preamble time for 40MHz (turbo) operation (min ?) */
+#define	AR5K_INIT_OFDM_PREAMBLE_TIME_MIN	14
+#define	AR5K_INIT_OFDM_SYMBOL_TIME		4
+#define	AR5K_INIT_OFDM_PLCP_BITS		22
+
+/* Rx latency for 5 and 10MHz operation (max ?) */
+#define AR5K_INIT_RX_LAT_MAX			63
+/* Tx latencies from initvals (5212 only but no problem
+ * because we only tweak them on 5212) */
+#define	AR5K_INIT_TX_LAT_A			54
+#define	AR5K_INIT_TX_LAT_BG			384
+/* Tx latency for 40MHz (turbo) operation (min ?) */
+#define	AR5K_INIT_TX_LAT_MIN			32
+/* Default Tx/Rx latencies (same for 5211)*/
+#define AR5K_INIT_TX_LATENCY_5210		54
+#define	AR5K_INIT_RX_LATENCY_5210		29
+
+/* Tx frame to Tx data start delay */
+#define AR5K_INIT_TXF2TXD_START_DEFAULT		14
+#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ	12
+#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ	13
+
+/* We need to increase PHY switch and agc settling time
+ * on turbo mode */
+#define	AR5K_SWITCH_SETTLING			5760
+#define	AR5K_SWITCH_SETTLING_TURBO		7168
+
+#define	AR5K_AGC_SETTLING			28
+/* 38 on 5210 but shouldn't matter */
+#define	AR5K_AGC_SETTLING_TURBO			37
+
+
+
+/*****************************\
+* GENERIC CHIPSET DEFINITIONS *
+\*****************************/
+
+/**
+ * enum ath5k_version - MAC Chips
+ * @AR5K_AR5210: AR5210 (Crete)
+ * @AR5K_AR5211: AR5211 (Oahu/Maui)
+ * @AR5K_AR5212: AR5212 (Venice) and newer
+ */
+enum ath5k_version {
+	AR5K_AR5210	= 0,
+	AR5K_AR5211	= 1,
+	AR5K_AR5212	= 2,
+};
+
+/**
+ * enum ath5k_radio - PHY Chips
+ * @AR5K_RF5110: RF5110 (Fez)
+ * @AR5K_RF5111: RF5111 (Sombrero)
+ * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2)
+ * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite)
+ * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor)
+ * @AR5K_RF2316: RF2315/2316 (Cobra SoC)
+ * @AR5K_RF2317: RF2317 (Spider SoC)
+ * @AR5K_RF2425: RF2425/2417 (Swan/Nalla)
+ */
+enum ath5k_radio {
+	AR5K_RF5110	= 0,
+	AR5K_RF5111	= 1,
+	AR5K_RF5112	= 2,
+	AR5K_RF2413	= 3,
+	AR5K_RF5413	= 4,
+	AR5K_RF2316	= 5,
+	AR5K_RF2317	= 6,
+	AR5K_RF2425	= 7,
+};
+
+/*
+ * Common silicon revision/version values
+ */
+
+#define AR5K_SREV_UNKNOWN	0xffff
+
+#define AR5K_SREV_AR5210	0x00 /* Crete */
+#define AR5K_SREV_AR5311	0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A	0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B	0x30 /* Spirit */
+#define AR5K_SREV_AR5211	0x40 /* Oahu */
+#define AR5K_SREV_AR5212	0x50 /* Venice */
+#define AR5K_SREV_AR5312_R2	0x52 /* AP31 */
+#define AR5K_SREV_AR5212_V4	0x54 /* ??? */
+#define AR5K_SREV_AR5213	0x55 /* ??? */
+#define AR5K_SREV_AR5312_R7	0x57 /* AP30 */
+#define AR5K_SREV_AR2313_R8	0x58 /* AP43 */
+#define AR5K_SREV_AR5213A	0x59 /* Hainan */
+#define AR5K_SREV_AR2413	0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414	0x70 /* Griffin */
+#define AR5K_SREV_AR2315_R6	0x86 /* AP51-Light */
+#define AR5K_SREV_AR2315_R7	0x87 /* AP51-Full */
+#define AR5K_SREV_AR5424	0x90 /* Condor */
+#define AR5K_SREV_AR2317_R1	0x90 /* AP61-Light */
+#define AR5K_SREV_AR2317_R2	0x91 /* AP61-Full */
+#define AR5K_SREV_AR5413	0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414	0xa0 /* Eagle */
+#define AR5K_SREV_AR2415	0xb0 /* Talon */
+#define AR5K_SREV_AR5416	0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418	0xca /* PCI-E */
+#define AR5K_SREV_AR2425	0xe0 /* Swan */
+#define AR5K_SREV_AR2417	0xf0 /* Nala */
+
+#define AR5K_SREV_RAD_5110	0x00
+#define AR5K_SREV_RAD_5111	0x10
+#define AR5K_SREV_RAD_5111A	0x15
+#define AR5K_SREV_RAD_2111	0x20
+#define AR5K_SREV_RAD_5112	0x30
+#define AR5K_SREV_RAD_5112A	0x35
+#define	AR5K_SREV_RAD_5112B	0x36
+#define AR5K_SREV_RAD_2112	0x40
+#define AR5K_SREV_RAD_2112A	0x45
+#define	AR5K_SREV_RAD_2112B	0x46
+#define AR5K_SREV_RAD_2413	0x50
+#define AR5K_SREV_RAD_5413	0x60
+#define AR5K_SREV_RAD_2316	0x70 /* Cobra SoC */
+#define AR5K_SREV_RAD_2317	0x80
+#define AR5K_SREV_RAD_5424	0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425	0xa2
+#define AR5K_SREV_RAD_5133	0xc0
+
+#define AR5K_SREV_PHY_5211	0x30
+#define AR5K_SREV_PHY_5212	0x41
+#define	AR5K_SREV_PHY_5212A	0x42
+#define AR5K_SREV_PHY_5212B	0x43
+#define AR5K_SREV_PHY_2413	0x45
+#define AR5K_SREV_PHY_5413	0x61
+#define AR5K_SREV_PHY_2425	0x70
+
+/* TODO add support to mac80211 for vendor-specific rates and modes */
+
+/**
+ * DOC: Atheros XR
+ *
+ * Some of this information is based on Documentation from:
+ *
+ * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
+ *
+ * Atheros' eXtended Range - range enhancing extension is a modulation scheme
+ * that is supposed to double the link distance between an Atheros XR-enabled
+ * client device with an Atheros XR-enabled access point. This is achieved
+ * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB
+ * above what the 802.11 specifications demand. In addition, new (proprietary)
+ * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
+ *
+ * Please note that can you either use XR or TURBO but you cannot use both,
+ * they are exclusive.
+ *
+ * Also note that we do not plan to support XR mode at least for now. You can
+ * get a mode similar to XR by using 5MHz bwmode.
+ */
+
+
+/**
+ * DOC: Atheros SuperAG
+ *
+ * In addition to XR we have another modulation scheme called TURBO mode
+ * that is supposed to provide a throughput transmission speed up to 40Mbit/s
+ * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two
+ * 54Mbit/s 802.11g channels. To use this feature both ends must support it.
+ * There is also a distinction between "static" and "dynamic" turbo modes:
+ *
+ * - Static: is the dumb version: devices set to this mode stick to it until
+ *     the mode is turned off.
+ *
+ * - Dynamic: is the intelligent version, the network decides itself if it
+ *     is ok to use turbo. As soon as traffic is detected on adjacent channels
+ *     (which would get used in turbo mode), or when a non-turbo station joins
+ *     the network, turbo mode won't be used until the situation changes again.
+ *     Dynamic mode is achieved by Atheros' Adaptive Radio (AR) feature which
+ *     monitors the used radio band in order to decide whether turbo mode may
+ *     be used or not.
+ *
+ * This article claims Super G sticks to bonding of channels 5 and 6 for
+ * USA:
+ *
+ * https://www.pcworld.com/article/id,113428-page,1/article.html
+ *
+ * The channel bonding seems to be driver specific though.
+ *
+ * In addition to TURBO modes we also have the following features for even
+ * greater speed-up:
+ *
+ * - Bursting: allows multiple frames to be sent at once, rather than pausing
+ *     after each frame. Bursting is a standards-compliant feature that can be
+ *     used with any Access Point.
+ *
+ * - Fast frames: increases the amount of information that can be sent per
+ *     frame, also resulting in a reduction of transmission overhead. It is a
+ *     proprietary feature that needs to be supported by the Access Point.
+ *
+ * - Compression: data frames are compressed in real time using a Lempel Ziv
+ *     algorithm. This is done transparently. Once this feature is enabled,
+ *     compression and decompression takes place inside the chipset, without
+ *     putting additional load on the host CPU.
+ *
+ * As with XR we also don't plan to support SuperAG features for now. You can
+ * get a mode similar to TURBO by using 40MHz bwmode.
+ */
+
+
+/**
+ * enum ath5k_driver_mode - PHY operation mode
+ * @AR5K_MODE_11A: 802.11a
+ * @AR5K_MODE_11B: 802.11b
+ * @AR5K_MODE_11G: 801.11g
+ * @AR5K_MODE_MAX: Used for boundary checks
+ *
+ * Do not change the order here, we use these as
+ * array indices and it also maps EEPROM structures.
+ */
+enum ath5k_driver_mode {
+	AR5K_MODE_11A		=	0,
+	AR5K_MODE_11B		=	1,
+	AR5K_MODE_11G		=	2,
+	AR5K_MODE_MAX		=	3
+};
+
+/**
+ * enum ath5k_ant_mode - Antenna operation mode
+ * @AR5K_ANTMODE_DEFAULT: Default antenna setup
+ * @AR5K_ANTMODE_FIXED_A: Only antenna A is present
+ * @AR5K_ANTMODE_FIXED_B: Only antenna B is present
+ * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap
+ * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc
+ * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc
+ * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx-
+ * @AR5K_ANTMODE_MAX: Used for boundary checks
+ *
+ * For more infos on antenna control check out phy.c
+ */
+enum ath5k_ant_mode {
+	AR5K_ANTMODE_DEFAULT	= 0,
+	AR5K_ANTMODE_FIXED_A	= 1,
+	AR5K_ANTMODE_FIXED_B	= 2,
+	AR5K_ANTMODE_SINGLE_AP	= 3,
+	AR5K_ANTMODE_SECTOR_AP	= 4,
+	AR5K_ANTMODE_SECTOR_STA	= 5,
+	AR5K_ANTMODE_DEBUG	= 6,
+	AR5K_ANTMODE_MAX,
+};
+
+/**
+ * enum ath5k_bw_mode - Bandwidth operation mode
+ * @AR5K_BWMODE_DEFAULT: 20MHz, default operation
+ * @AR5K_BWMODE_5MHZ: Quarter rate
+ * @AR5K_BWMODE_10MHZ: Half rate
+ * @AR5K_BWMODE_40MHZ: Turbo
+ */
+enum ath5k_bw_mode {
+	AR5K_BWMODE_DEFAULT	= 0,
+	AR5K_BWMODE_5MHZ	= 1,
+	AR5K_BWMODE_10MHZ	= 2,
+	AR5K_BWMODE_40MHZ	= 3
+};
+
+
+
+/****************\
+  TX DEFINITIONS
+\****************/
+
+/**
+ * struct ath5k_tx_status - TX Status descriptor
+ * @ts_seqnum: Sequence number
+ * @ts_tstamp: Timestamp
+ * @ts_status: Status code
+ * @ts_final_idx: Final transmission series index
+ * @ts_final_retry: Final retry count
+ * @ts_rssi: RSSI for received ACK
+ * @ts_shortretry: Short retry count
+ * @ts_virtcol: Virtual collision count
+ * @ts_antenna: Antenna used
+ *
+ * TX status descriptor gets filled by the hw
+ * on each transmission attempt.
+ */
+struct ath5k_tx_status {
+	u16	ts_seqnum;
+	u16	ts_tstamp;
+	u8	ts_status;
+	u8	ts_final_idx;
+	u8	ts_final_retry;
+	s8	ts_rssi;
+	u8	ts_shortretry;
+	u8	ts_virtcol;
+	u8	ts_antenna;
+};
+
+#define AR5K_TXSTAT_ALTRATE	0x80
+#define AR5K_TXERR_XRETRY	0x01
+#define AR5K_TXERR_FILT		0x02
+#define AR5K_TXERR_FIFO		0x04
+
+/**
+ * enum ath5k_tx_queue - Queue types used to classify tx queues.
+ * @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
+ * @AR5K_TX_QUEUE_DATA: A normal data queue
+ * @AR5K_TX_QUEUE_BEACON: The beacon queue
+ * @AR5K_TX_QUEUE_CAB: The after-beacon queue
+ * @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
+ */
+enum ath5k_tx_queue {
+	AR5K_TX_QUEUE_INACTIVE = 0,
+	AR5K_TX_QUEUE_DATA,
+	AR5K_TX_QUEUE_BEACON,
+	AR5K_TX_QUEUE_CAB,
+	AR5K_TX_QUEUE_UAPSD,
+};
+
+#define	AR5K_NUM_TX_QUEUES		10
+#define	AR5K_NUM_TX_QUEUES_NOQCU	2
+
+/**
+ * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues
+ * @AR5K_WME_AC_BK: Background traffic
+ * @AR5K_WME_AC_BE: Best-effort (normal) traffic
+ * @AR5K_WME_AC_VI: Video traffic
+ * @AR5K_WME_AC_VO: Voice traffic
+ *
+ * These are the 4 Access Categories as defined in
+ * WME spec. 0 is the lowest priority and 4 is the
+ * highest. Normal data that hasn't been classified
+ * goes to the Best Effort AC.
+ */
+enum ath5k_tx_queue_subtype {
+	AR5K_WME_AC_BK = 0,
+	AR5K_WME_AC_BE,
+	AR5K_WME_AC_VI,
+	AR5K_WME_AC_VO,
+};
+
+/**
+ * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions
+ * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available)
+ * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available)
+ * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index
+ * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index
+ * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue
+ * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue
+ * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery,
+ *
+ * Each number represents a hw queue. If hw does not support hw queues
+ * (eg 5210) all data goes in one queue.
+ */
+enum ath5k_tx_queue_id {
+	AR5K_TX_QUEUE_ID_NOQCU_DATA	= 0,
+	AR5K_TX_QUEUE_ID_NOQCU_BEACON	= 1,
+	AR5K_TX_QUEUE_ID_DATA_MIN	= 0,
+	AR5K_TX_QUEUE_ID_DATA_MAX	= 3,
+	AR5K_TX_QUEUE_ID_UAPSD		= 7,
+	AR5K_TX_QUEUE_ID_CAB		= 8,
+	AR5K_TX_QUEUE_ID_BEACON		= 9,
+};
+
+/*
+ * Flags to set hw queue's parameters...
+ */
+#define AR5K_TXQ_FLAG_TXOKINT_ENABLE		0x0001	/* Enable TXOK interrupt */
+#define AR5K_TXQ_FLAG_TXERRINT_ENABLE		0x0002	/* Enable TXERR interrupt */
+#define AR5K_TXQ_FLAG_TXEOLINT_ENABLE		0x0004	/* Enable TXEOL interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXDESCINT_ENABLE		0x0008	/* Enable TXDESC interrupt -not used- */
+#define AR5K_TXQ_FLAG_TXURNINT_ENABLE		0x0010	/* Enable TXURN interrupt */
+#define AR5K_TXQ_FLAG_CBRORNINT_ENABLE		0x0020	/* Enable CBRORN interrupt */
+#define AR5K_TXQ_FLAG_CBRURNINT_ENABLE		0x0040	/* Enable CBRURN interrupt */
+#define AR5K_TXQ_FLAG_QTRIGINT_ENABLE		0x0080	/* Enable QTRIG interrupt */
+#define AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE		0x0100	/* Enable TXNOFRM interrupt */
+#define AR5K_TXQ_FLAG_BACKOFF_DISABLE		0x0200	/* Disable random post-backoff */
+#define AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE	0x0300	/* Enable ready time expiry policy (?)*/
+#define AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE	0x0800	/* Enable backoff while bursting */
+#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS		0x1000	/* Disable backoff while bursting */
+#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE	0x2000	/* Enable hw compression -not implemented-*/
+
+/**
+ * struct ath5k_txq - Transmit queue state
+ * @qnum: Hardware q number
+ * @link: Link ptr in last TX desc
+ * @q: Transmit queue (&struct list_head)
+ * @lock: Lock on q and link
+ * @setup: Is the queue configured
+ * @txq_len:Number of queued buffers
+ * @txq_max: Max allowed num of queued buffers
+ * @txq_poll_mark: Used to check if queue got stuck
+ * @txq_stuck: Queue stuck counter
+ *
+ * One of these exists for each hardware transmit queue.
+ * Packets sent to us from above are assigned to queues based
+ * on their priority.  Not all devices support a complete set
+ * of hardware transmit queues. For those devices the array
+ * sc_ac2q will map multiple priorities to fewer hardware queues
+ * (typically all to one hardware queue).
+ */
+struct ath5k_txq {
+	unsigned int		qnum;
+	u32			*link;
+	struct list_head	q;
+	spinlock_t		lock;
+	bool			setup;
+	int			txq_len;
+	int			txq_max;
+	bool			txq_poll_mark;
+	unsigned int		txq_stuck;
+};
+
+/**
+ * struct ath5k_txq_info - A struct to hold TX queue's parameters
+ * @tqi_type: One of enum ath5k_tx_queue
+ * @tqi_subtype: One of enum ath5k_tx_queue_subtype
+ * @tqi_flags: TX queue flags (see above)
+ * @tqi_aifs: Arbitrated Inter-frame Space
+ * @tqi_cw_min: Minimum Contention Window
+ * @tqi_cw_max: Maximum Contention Window
+ * @tqi_cbr_period: Constant bit rate period
+ * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled
+ */
+struct ath5k_txq_info {
+	enum ath5k_tx_queue tqi_type;
+	enum ath5k_tx_queue_subtype tqi_subtype;
+	u16	tqi_flags;
+	u8	tqi_aifs;
+	u16	tqi_cw_min;
+	u16	tqi_cw_max;
+	u32	tqi_cbr_period;
+	u32	tqi_cbr_overflow_limit;
+	u32	tqi_burst_time;
+	u32	tqi_ready_time;
+};
+
+/**
+ * enum ath5k_pkt_type - Transmit packet types
+ * @AR5K_PKT_TYPE_NORMAL: Normal data
+ * @AR5K_PKT_TYPE_ATIM: ATIM
+ * @AR5K_PKT_TYPE_PSPOLL: PS-Poll
+ * @AR5K_PKT_TYPE_BEACON: Beacon
+ * @AR5K_PKT_TYPE_PROBE_RESP: Probe response
+ * @AR5K_PKT_TYPE_PIFS: PIFS
+ * Used on tx control descriptor
+ */
+enum ath5k_pkt_type {
+	AR5K_PKT_TYPE_NORMAL		= 0,
+	AR5K_PKT_TYPE_ATIM		= 1,
+	AR5K_PKT_TYPE_PSPOLL		= 2,
+	AR5K_PKT_TYPE_BEACON		= 3,
+	AR5K_PKT_TYPE_PROBE_RESP	= 4,
+	AR5K_PKT_TYPE_PIFS		= 5,
+};
+
+/*
+ * TX power and TPC settings
+ */
+#define AR5K_TXPOWER_OFDM(_r, _v)	(			\
+	((0 & 1) << ((_v) + 6)) |				\
+	(((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v))	\
+)
+
+#define AR5K_TXPOWER_CCK(_r, _v)	(			\
+	(ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v)	\
+)
+
+
+
+/****************\
+  RX DEFINITIONS
+\****************/
+
+/**
+ * struct ath5k_rx_status - RX Status descriptor
+ * @rs_datalen: Data length
+ * @rs_tstamp: Timestamp
+ * @rs_status: Status code
+ * @rs_phyerr: PHY error mask
+ * @rs_rssi: RSSI in 0.5dbm units
+ * @rs_keyix: Index to the key used for decrypting
+ * @rs_rate: Rate used to decode the frame
+ * @rs_antenna: Antenna used to receive the frame
+ * @rs_more: Indicates this is a frame fragment (Fast frames)
+ */
+struct ath5k_rx_status {
+	u16	rs_datalen;
+	u16	rs_tstamp;
+	u8	rs_status;
+	u8	rs_phyerr;
+	s8	rs_rssi;
+	u8	rs_keyix;
+	u8	rs_rate;
+	u8	rs_antenna;
+	u8	rs_more;
+};
+
+#define AR5K_RXERR_CRC		0x01
+#define AR5K_RXERR_PHY		0x02
+#define AR5K_RXERR_FIFO		0x04
+#define AR5K_RXERR_DECRYPT	0x08
+#define AR5K_RXERR_MIC		0x10
+#define AR5K_RXKEYIX_INVALID	((u8) -1)
+#define AR5K_TXKEYIX_INVALID	((u32) -1)
+
+
+/**************************\
+ BEACON TIMERS DEFINITIONS
+\**************************/
+
+#define AR5K_BEACON_PERIOD	0x0000ffff
+#define AR5K_BEACON_ENA		0x00800000 /*enable beacon xmit*/
+#define AR5K_BEACON_RESET_TSF	0x01000000 /*force a TSF reset*/
+
+
+/*
+ * TSF to TU conversion:
+ *
+ * TSF is a 64bit value in usec (microseconds).
+ * TU is a 32bit value and defined by IEEE802.11 (page 6) as "A measurement of
+ * time equal to 1024 usec", so it's roughly milliseconds (usec / 1024).
+ */
+#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
+
+
+
+/*******************************\
+  GAIN OPTIMIZATION DEFINITIONS
+\*******************************/
+
+/**
+ * enum ath5k_rfgain - RF Gain optimization engine state
+ * @AR5K_RFGAIN_INACTIVE: Engine disabled
+ * @AR5K_RFGAIN_ACTIVE: Probe active
+ * @AR5K_RFGAIN_READ_REQUESTED: Probe requested
+ * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change
+ */
+enum ath5k_rfgain {
+	AR5K_RFGAIN_INACTIVE = 0,
+	AR5K_RFGAIN_ACTIVE,
+	AR5K_RFGAIN_READ_REQUESTED,
+	AR5K_RFGAIN_NEED_CHANGE,
+};
+
+/**
+ * struct ath5k_gain - RF Gain optimization engine state data
+ * @g_step_idx: Current step index
+ * @g_current: Current gain
+ * @g_target: Target gain
+ * @g_low: Low gain boundary
+ * @g_high: High gain boundary
+ * @g_f_corr: Gain_F correction
+ * @g_state: One of enum ath5k_rfgain
+ */
+struct ath5k_gain {
+	u8			g_step_idx;
+	u8			g_current;
+	u8			g_target;
+	u8			g_low;
+	u8			g_high;
+	u8			g_f_corr;
+	u8			g_state;
+};
+
+
+
+/********************\
+  COMMON DEFINITIONS
+\********************/
+
+#define AR5K_SLOT_TIME_9	396
+#define AR5K_SLOT_TIME_20	880
+#define AR5K_SLOT_TIME_MAX	0xffff
+
+/**
+ * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111
+ * @a2_flags: Channel flags (internal)
+ * @a2_athchan: HW channel number (internal)
+ *
+ * This structure is used to map 2GHz channels to
+ * 5GHz Atheros channels on 2111 frequency converter
+ * that comes together with RF5111
+ * TODO: Clean up
+ */
+struct ath5k_athchan_2ghz {
+	u32	a2_flags;
+	u16	a2_athchan;
+};
+
+/**
+ * enum ath5k_dmasize -  DMA size definitions (2^(n+2))
+ * @AR5K_DMASIZE_4B: 4Bytes
+ * @AR5K_DMASIZE_8B: 8Bytes
+ * @AR5K_DMASIZE_16B: 16Bytes
+ * @AR5K_DMASIZE_32B: 32Bytes
+ * @AR5K_DMASIZE_64B: 64Bytes (Default)
+ * @AR5K_DMASIZE_128B: 128Bytes
+ * @AR5K_DMASIZE_256B: 256Bytes
+ * @AR5K_DMASIZE_512B: 512Bytes
+ *
+ * These are used to set DMA burst size on hw
+ *
+ * Note: Some platforms can't handle more than 4Bytes
+ * be careful on embedded boards.
+ */
+enum ath5k_dmasize {
+	AR5K_DMASIZE_4B	= 0,
+	AR5K_DMASIZE_8B,
+	AR5K_DMASIZE_16B,
+	AR5K_DMASIZE_32B,
+	AR5K_DMASIZE_64B,
+	AR5K_DMASIZE_128B,
+	AR5K_DMASIZE_256B,
+	AR5K_DMASIZE_512B
+};
+
+
+
+/******************\
+  RATE DEFINITIONS
+\******************/
+
+/**
+ * DOC: Rate codes
+ *
+ * Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32.
+ *
+ * The rate code is used to get the RX rate or set the TX rate on the
+ * hardware descriptors. It is also used for internal modulation control
+ * and settings.
+ *
+ * This is the hardware rate map we are aware of (html unfriendly):
+ *
+ * Rate code	Rate (Kbps)
+ * ---------	-----------
+ * 0x01		 3000 (XR)
+ * 0x02		 1000 (XR)
+ * 0x03		  250 (XR)
+ * 0x04 - 05	-Reserved-
+ * 0x06		 2000 (XR)
+ * 0x07		  500 (XR)
+ * 0x08		48000 (OFDM)
+ * 0x09		24000 (OFDM)
+ * 0x0A		12000 (OFDM)
+ * 0x0B		 6000 (OFDM)
+ * 0x0C		54000 (OFDM)
+ * 0x0D		36000 (OFDM)
+ * 0x0E		18000 (OFDM)
+ * 0x0F		 9000 (OFDM)
+ * 0x10 - 17	-Reserved-
+ * 0x18		11000L (CCK)
+ * 0x19		 5500L (CCK)
+ * 0x1A		 2000L (CCK)
+ * 0x1B		 1000L (CCK)
+ * 0x1C		11000S (CCK)
+ * 0x1D		 5500S (CCK)
+ * 0x1E		 2000S (CCK)
+ * 0x1F		-Reserved-
+ *
+ * "S" indicates CCK rates with short preamble and "L" with long preamble.
+ *
+ * AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
+ * lowest 4 bits, so they are the same as above with a 0xF mask.
+ * (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
+ * We handle this in ath5k_setup_bands().
+ */
+#define AR5K_MAX_RATES 32
+
+/* B */
+#define ATH5K_RATE_CODE_1M	0x1B
+#define ATH5K_RATE_CODE_2M	0x1A
+#define ATH5K_RATE_CODE_5_5M	0x19
+#define ATH5K_RATE_CODE_11M	0x18
+/* A and G */
+#define ATH5K_RATE_CODE_6M	0x0B
+#define ATH5K_RATE_CODE_9M	0x0F
+#define ATH5K_RATE_CODE_12M	0x0A
+#define ATH5K_RATE_CODE_18M	0x0E
+#define ATH5K_RATE_CODE_24M	0x09
+#define ATH5K_RATE_CODE_36M	0x0D
+#define ATH5K_RATE_CODE_48M	0x08
+#define ATH5K_RATE_CODE_54M	0x0C
+
+/* Adding this flag to rate_code on B rates
+ * enables short preamble */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
+
+/*
+ * Crypto definitions
+ */
+
+#define AR5K_KEYCACHE_SIZE	8
+extern bool ath5k_modparam_nohwcrypt;
+
+/***********************\
+ HW RELATED DEFINITIONS
+\***********************/
+
+/*
+ * Misc definitions
+ */
+#define	AR5K_RSSI_EP_MULTIPLIER	(1 << 7)
+
+#define AR5K_ASSERT_ENTRY(_e, _s) do {		\
+	if (_e >= _s)				\
+		return false;			\
+} while (0)
+
+/*
+ * Hardware interrupt abstraction
+ */
+
+/**
+ * enum ath5k_int - Hardware interrupt masks helpers
+ * @AR5K_INT_RXOK: Frame successfully received
+ * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor
+ * @AR5K_INT_RXERR: Frame reception failed
+ * @AR5K_INT_RXNOFRM: No frame received within a specified time period
+ * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors
+ * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is
+ *		not always fatal, on some chips we can continue operation
+ *		without resetting the card, that's why %AR5K_INT_FATAL is not
+ *		common for all chips.
+ * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts
+ *
+ * @AR5K_INT_TXOK: Frame transmission success
+ * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor
+ * @AR5K_INT_TXERR: Frame transmission failure
+ * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The
+ *		Queue Control Unit (QCU) signals an EOL interrupt only if a
+ *		descriptor's LinkPtr is NULL. For more details, refer to:
+ *		"http://www.freepatentsonline.com/20030225739.html"
+ * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period
+ * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should
+ *		increase the TX trigger threshold.
+ * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts
+ *
+ * @AR5K_INT_MIB: Indicates the either Management Information Base counters or
+ *		one of the PHY error counters reached the maximum value and
+ *		should be read and cleared.
+ * @AR5K_INT_SWI: Software triggered interrupt.
+ * @AR5K_INT_RXPHY: RX PHY Error
+ * @AR5K_INT_RXKCM: RX Key cache miss
+ * @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
+ *		beacon that must be handled in software. The alternative is if
+ *		you have VEOL support, in that case you let the hardware deal
+ *		with things.
+ * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold
+ * @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
+ *		beacons from the AP have associated with, we should probably
+ *		try to reassociate. When in IBSS mode this might mean we have
+ *		not received any beacons from any local stations. Note that
+ *		every station in an IBSS schedules to send beacons at the
+ *		Target Beacon Transmission Time (TBTT) with a random backoff.
+ * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty.
+ * @AR5K_INT_TIM: Beacon with local station's TIM bit set
+ * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received
+ * @AR5K_INT_DTIM_SYNC: DTIM sync lost
+ * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to
+ *		our GPIO pins.
+ * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting
+ * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got
+ *		nothing or an incomplete CAB frame sequence.
+ * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired
+ * @AR5K_INT_QCBRURN: A queue got triggered wile empty
+ * @AR5K_INT_QTRIG: A queue got triggered
+ *
+ * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA
+ *		errors. Indicates we need to reset the card.
+ * @AR5K_INT_GLOBAL: Used to clear and set the IER
+ * @AR5K_INT_NOCARD: Signals the card has been removed
+ * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same
+ *		bit value
+ *
+ * These are mapped to take advantage of some common bits
+ * between the MACs, to be able to set intr properties
+ * easier. Some of them are not used yet inside hw.c. Most map
+ * to the respective hw interrupt value as they are common among different
+ * MACs.
+ */
+enum ath5k_int {
+	AR5K_INT_RXOK	= 0x00000001,
+	AR5K_INT_RXDESC	= 0x00000002,
+	AR5K_INT_RXERR	= 0x00000004,
+	AR5K_INT_RXNOFRM = 0x00000008,
+	AR5K_INT_RXEOL	= 0x00000010,
+	AR5K_INT_RXORN	= 0x00000020,
+	AR5K_INT_TXOK	= 0x00000040,
+	AR5K_INT_TXDESC	= 0x00000080,
+	AR5K_INT_TXERR	= 0x00000100,
+	AR5K_INT_TXNOFRM = 0x00000200,
+	AR5K_INT_TXEOL	= 0x00000400,
+	AR5K_INT_TXURN	= 0x00000800,
+	AR5K_INT_MIB	= 0x00001000,
+	AR5K_INT_SWI	= 0x00002000,
+	AR5K_INT_RXPHY	= 0x00004000,
+	AR5K_INT_RXKCM	= 0x00008000,
+	AR5K_INT_SWBA	= 0x00010000,
+	AR5K_INT_BRSSI	= 0x00020000,
+	AR5K_INT_BMISS	= 0x00040000,
+	AR5K_INT_FATAL	= 0x00080000, /* Non common */
+	AR5K_INT_BNR	= 0x00100000, /* Non common */
+	AR5K_INT_TIM	= 0x00200000, /* Non common */
+	AR5K_INT_DTIM	= 0x00400000, /* Non common */
+	AR5K_INT_DTIM_SYNC =	0x00800000, /* Non common */
+	AR5K_INT_GPIO	=	0x01000000,
+	AR5K_INT_BCN_TIMEOUT =	0x02000000, /* Non common */
+	AR5K_INT_CAB_TIMEOUT =	0x04000000, /* Non common */
+	AR5K_INT_QCBRORN =	0x08000000, /* Non common */
+	AR5K_INT_QCBRURN =	0x10000000, /* Non common */
+	AR5K_INT_QTRIG	=	0x20000000, /* Non common */
+	AR5K_INT_GLOBAL =	0x80000000,
+
+	AR5K_INT_TX_ALL = AR5K_INT_TXOK
+		| AR5K_INT_TXDESC
+		| AR5K_INT_TXERR
+		| AR5K_INT_TXNOFRM
+		| AR5K_INT_TXEOL
+		| AR5K_INT_TXURN,
+
+	AR5K_INT_RX_ALL = AR5K_INT_RXOK
+		| AR5K_INT_RXDESC
+		| AR5K_INT_RXERR
+		| AR5K_INT_RXNOFRM
+		| AR5K_INT_RXEOL
+		| AR5K_INT_RXORN,
+
+	AR5K_INT_COMMON  = AR5K_INT_RXOK
+		| AR5K_INT_RXDESC
+		| AR5K_INT_RXERR
+		| AR5K_INT_RXNOFRM
+		| AR5K_INT_RXEOL
+		| AR5K_INT_RXORN
+		| AR5K_INT_TXOK
+		| AR5K_INT_TXDESC
+		| AR5K_INT_TXERR
+		| AR5K_INT_TXNOFRM
+		| AR5K_INT_TXEOL
+		| AR5K_INT_TXURN
+		| AR5K_INT_MIB
+		| AR5K_INT_SWI
+		| AR5K_INT_RXPHY
+		| AR5K_INT_RXKCM
+		| AR5K_INT_SWBA
+		| AR5K_INT_BRSSI
+		| AR5K_INT_BMISS
+		| AR5K_INT_GPIO
+		| AR5K_INT_GLOBAL,
+
+	AR5K_INT_NOCARD	= 0xffffffff
+};
+
+/**
+ * enum ath5k_calibration_mask - Mask which calibration is active at the moment
+ * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT)
+ * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q)
+ * @AR5K_CALIBRATION_NF: Noise Floor calibration
+ * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity
+ */
+enum ath5k_calibration_mask {
+	AR5K_CALIBRATION_FULL = 0x01,
+	AR5K_CALIBRATION_SHORT = 0x02,
+	AR5K_CALIBRATION_NF = 0x04,
+	AR5K_CALIBRATION_ANI = 0x08,
+};
+
+/**
+ * enum ath5k_power_mode - Power management modes
+ * @AR5K_PM_UNDEFINED: Undefined
+ * @AR5K_PM_AUTO: Allow card to sleep if possible
+ * @AR5K_PM_AWAKE: Force card to wake up
+ * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS)
+ * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration
+ *
+ * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO
+ * are also known to have problems on some cards. This is not a big
+ * problem though because we can have almost the same effect as
+ * FULL_SLEEP by putting card on warm reset (it's almost powered down).
+ */
+enum ath5k_power_mode {
+	AR5K_PM_UNDEFINED = 0,
+	AR5K_PM_AUTO,
+	AR5K_PM_AWAKE,
+	AR5K_PM_FULL_SLEEP,
+	AR5K_PM_NETWORK_SLEEP,
+};
+
+/*
+ * These match net80211 definitions (not used in
+ * mac80211).
+ * TODO: Clean this up
+ */
+#define AR5K_LED_INIT	0 /*IEEE80211_S_INIT*/
+#define AR5K_LED_SCAN	1 /*IEEE80211_S_SCAN*/
+#define AR5K_LED_AUTH	2 /*IEEE80211_S_AUTH*/
+#define AR5K_LED_ASSOC	3 /*IEEE80211_S_ASSOC*/
+#define AR5K_LED_RUN	4 /*IEEE80211_S_RUN*/
+
+/* GPIO-controlled software LED */
+#define AR5K_SOFTLED_PIN	0
+#define AR5K_SOFTLED_ON		0
+#define AR5K_SOFTLED_OFF	1
+
+
+/* XXX: we *may* move cap_range stuff to struct wiphy */
+struct ath5k_capabilities {
+	/*
+	 * Supported PHY modes
+	 * (ie. AR5K_MODE_11A, AR5K_MODE_11B, ...)
+	 */
+	DECLARE_BITMAP(cap_mode, AR5K_MODE_MAX);
+
+	/*
+	 * Frequency range (without regulation restrictions)
+	 */
+	struct {
+		u16	range_2ghz_min;
+		u16	range_2ghz_max;
+		u16	range_5ghz_min;
+		u16	range_5ghz_max;
+	} cap_range;
+
+	/*
+	 * Values stored in the EEPROM (some of them...)
+	 */
+	struct ath5k_eeprom_info	cap_eeprom;
+
+	/*
+	 * Queue information
+	 */
+	struct {
+		u8	q_tx_num;
+	} cap_queues;
+
+	bool cap_has_phyerr_counters;
+	bool cap_has_mrr_support;
+	bool cap_needs_2GHz_ovr;
+};
+
+/* size of noise floor history (keep it a power of two) */
+#define ATH5K_NF_CAL_HIST_MAX	8
+struct ath5k_nfcal_hist {
+	s16 index;				/* current index into nfval */
+	s16 nfval[ATH5K_NF_CAL_HIST_MAX];	/* last few noise floors */
+};
+
+#define ATH5K_LED_MAX_NAME_LEN 31
+
+/*
+ * State for LED triggers
+ */
+struct ath5k_led {
+	char name[ATH5K_LED_MAX_NAME_LEN + 1];	/* name of the LED in sysfs */
+	struct ath5k_hw *ah;			/* driver state */
+	struct led_classdev led_dev;		/* led classdev */
+};
+
+/* Rfkill */
+struct ath5k_rfkill {
+	/* GPIO PIN for rfkill */
+	u16 gpio;
+	/* polarity of rfkill GPIO PIN */
+	bool polarity;
+	/* RFKILL toggle tasklet */
+	struct tasklet_struct toggleq;
+};
+
+/* statistics */
+struct ath5k_statistics {
+	/* antenna use */
+	unsigned int antenna_rx[5];	/* frames count per antenna RX */
+	unsigned int antenna_tx[5];	/* frames count per antenna TX */
+
+	/* frame errors */
+	unsigned int rx_all_count;	/* all RX frames, including errors */
+	unsigned int tx_all_count;	/* all TX frames, including errors */
+	unsigned int rx_bytes_count;	/* all RX bytes, including errored pkts
+					 * and the MAC headers for each packet
+					 */
+	unsigned int tx_bytes_count;	/* all TX bytes, including errored pkts
+					 * and the MAC headers and padding for
+					 * each packet.
+					 */
+	unsigned int rxerr_crc;
+	unsigned int rxerr_phy;
+	unsigned int rxerr_phy_code[32];
+	unsigned int rxerr_fifo;
+	unsigned int rxerr_decrypt;
+	unsigned int rxerr_mic;
+	unsigned int rxerr_proc;
+	unsigned int rxerr_jumbo;
+	unsigned int txerr_retry;
+	unsigned int txerr_fifo;
+	unsigned int txerr_filt;
+
+	/* MIB counters */
+	unsigned int ack_fail;
+	unsigned int rts_fail;
+	unsigned int rts_ok;
+	unsigned int fcs_error;
+	unsigned int beacons;
+
+	unsigned int mib_intr;
+	unsigned int rxorn_intr;
+	unsigned int rxeol_intr;
+};
+
+/*
+ * Misc defines
+ */
+
+#define AR5K_MAX_GPIO		10
+#define AR5K_MAX_RF_BANKS	8
+
+#if CHAN_DEBUG
+#define ATH_CHAN_MAX	(26 + 26 + 26 + 200 + 200)
+#else
+#define ATH_CHAN_MAX	(14 + 14 + 14 + 252 + 20)
+#endif
+
+#define	ATH_RXBUF	40		/* number of RX buffers */
+#define	ATH_TXBUF	200		/* number of TX buffers */
+#define ATH_BCBUF	4		/* number of beacon buffers */
+#define ATH5K_TXQ_LEN_MAX	(ATH_TXBUF / 4)		/* bufs per queue */
+#define ATH5K_TXQ_LEN_LOW	(ATH5K_TXQ_LEN_MAX / 2)	/* low mark */
+
+DECLARE_EWMA(beacon_rssi, 10, 8)
+
+/* Driver state associated with an instance of a device */
+struct ath5k_hw {
+	struct ath_common       common;
+
+	struct pci_dev		*pdev;
+	struct device		*dev;		/* for dma mapping */
+	int irq;
+	u16 devid;
+	void __iomem		*iobase;	/* address of the device */
+	struct mutex		lock;		/* dev-level lock */
+	struct ieee80211_hw	*hw;		/* IEEE 802.11 common */
+	struct ieee80211_supported_band sbands[NUM_NL80211_BANDS];
+	struct ieee80211_channel channels[ATH_CHAN_MAX];
+	struct ieee80211_rate	rates[NUM_NL80211_BANDS][AR5K_MAX_RATES];
+	s8			rate_idx[NUM_NL80211_BANDS][AR5K_MAX_RATES];
+	enum nl80211_iftype	opmode;
+
+#ifdef CONFIG_ATH5K_DEBUG
+	struct ath5k_dbg_info	debug;		/* debug info */
+#endif /* CONFIG_ATH5K_DEBUG */
+
+	struct ath5k_buf	*bufptr;	/* allocated buffer ptr */
+	struct ath5k_desc	*desc;		/* TX/RX descriptors */
+	dma_addr_t		desc_daddr;	/* DMA (physical) address */
+	size_t			desc_len;	/* size of TX/RX descriptors */
+
+	DECLARE_BITMAP(status, 4);
+#define ATH_STAT_INVALID	0		/* disable hardware accesses */
+#define ATH_STAT_LEDSOFT	2		/* enable LED gpio status */
+#define ATH_STAT_STARTED	3		/* opened & irqs enabled */
+#define ATH_STAT_RESET		4		/* hw reset */
+
+	unsigned int		filter_flags;	/* HW flags, AR5K_RX_FILTER_* */
+	unsigned int		fif_filter_flags; /* Current FIF_* filter flags */
+	struct ieee80211_channel *curchan;	/* current h/w channel */
+
+	u16			nvifs;
+
+	enum ath5k_int		imask;		/* interrupt mask copy */
+
+	spinlock_t		irqlock;
+	bool			rx_pending;	/* rx tasklet pending */
+	bool			tx_pending;	/* tx tasklet pending */
+
+	u8			bssidmask[ETH_ALEN];
+
+	unsigned int		led_pin,	/* GPIO pin for driving LED */
+				led_on;		/* pin setting for LED on */
+
+	struct work_struct	reset_work;	/* deferred chip reset */
+	struct work_struct	calib_work;	/* deferred phy calibration */
+
+	struct list_head	rxbuf;		/* receive buffer */
+	spinlock_t		rxbuflock;
+	u32			*rxlink;	/* link ptr in last RX desc */
+	struct tasklet_struct	rxtq;		/* rx intr tasklet */
+	struct ath5k_led	rx_led;		/* rx led */
+
+	struct list_head	txbuf;		/* transmit buffer */
+	spinlock_t		txbuflock;
+	unsigned int		txbuf_len;	/* buf count in txbuf list */
+	struct ath5k_txq	txqs[AR5K_NUM_TX_QUEUES];	/* tx queues */
+	struct tasklet_struct	txtq;		/* tx intr tasklet */
+	struct ath5k_led	tx_led;		/* tx led */
+
+	struct ath5k_rfkill	rf_kill;
+
+	spinlock_t		block;		/* protects beacon */
+	struct tasklet_struct	beacontq;	/* beacon intr tasklet */
+	struct list_head	bcbuf;		/* beacon buffer */
+	struct ieee80211_vif	*bslot[ATH_BCBUF];
+	u16			num_ap_vifs;
+	u16			num_adhoc_vifs;
+	u16			num_mesh_vifs;
+	unsigned int		bhalq,		/* SW q for outgoing beacons */
+				bmisscount,	/* missed beacon transmits */
+				bintval,	/* beacon interval in TU */
+				bsent;
+	unsigned int		nexttbtt;	/* next beacon time in TU */
+	struct ath5k_txq	*cabq;		/* content after beacon */
+
+	bool			assoc;		/* associate state */
+	bool			enable_beacon;	/* true if beacons are on */
+
+	struct ath5k_statistics	stats;
+
+	struct ath5k_ani_state	ani_state;
+	struct tasklet_struct	ani_tasklet;	/* ANI calibration */
+
+	struct delayed_work	tx_complete_work;
+
+	struct survey_info	survey;		/* collected survey info */
+
+	enum ath5k_int		ah_imr;
+
+	struct ieee80211_channel *ah_current_channel;
+	bool			ah_iq_cal_needed;
+	bool			ah_single_chip;
+
+	enum ath5k_version	ah_version;
+	enum ath5k_radio	ah_radio;
+	u32			ah_mac_srev;
+	u16			ah_mac_version;
+	u16			ah_phy_revision;
+	u16			ah_radio_5ghz_revision;
+	u16			ah_radio_2ghz_revision;
+
+#define ah_modes		ah_capabilities.cap_mode
+#define ah_ee_version		ah_capabilities.cap_eeprom.ee_version
+
+	u8			ah_retry_long;
+	u8			ah_retry_short;
+
+	bool			ah_use_32khz_clock;
+
+	u8			ah_coverage_class;
+	bool			ah_ack_bitrate_high;
+	u8			ah_bwmode;
+	bool			ah_short_slot;
+
+	/* Antenna Control */
+	u32			ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+	u8			ah_ant_mode;
+	u8			ah_tx_ant;
+	u8			ah_def_ant;
+
+	struct ath5k_capabilities ah_capabilities;
+
+	struct ath5k_txq_info	ah_txq[AR5K_NUM_TX_QUEUES];
+	u32			ah_txq_status;
+	u32			ah_txq_imr_txok;
+	u32			ah_txq_imr_txerr;
+	u32			ah_txq_imr_txurn;
+	u32			ah_txq_imr_txdesc;
+	u32			ah_txq_imr_txeol;
+	u32			ah_txq_imr_cbrorn;
+	u32			ah_txq_imr_cbrurn;
+	u32			ah_txq_imr_qtrig;
+	u32			ah_txq_imr_nofrm;
+
+	u32			ah_txq_isr_txok_all;
+
+	u32			*ah_rf_banks;
+	size_t			ah_rf_banks_size;
+	size_t			ah_rf_regs_count;
+	struct ath5k_gain	ah_gain;
+	u8			ah_offset[AR5K_MAX_RF_BANKS];
+
+
+	struct {
+		/* Temporary tables used for interpolation */
+		u8		tmpL[AR5K_EEPROM_N_PD_GAINS]
+					[AR5K_EEPROM_POWER_TABLE_SIZE];
+		u8		tmpR[AR5K_EEPROM_N_PD_GAINS]
+					[AR5K_EEPROM_POWER_TABLE_SIZE];
+		u8		txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2];
+		u16		txp_rates_power_table[AR5K_MAX_RATES];
+		u8		txp_min_idx;
+		bool		txp_tpc;
+		/* Values in 0.25dB units */
+		s16		txp_min_pwr;
+		s16		txp_max_pwr;
+		s16		txp_cur_pwr;
+		/* Values in 0.5dB units */
+		s16		txp_offset;
+		s16		txp_ofdm;
+		s16		txp_cck_ofdm_gainf_delta;
+		/* Value in dB units */
+		s16		txp_cck_ofdm_pwr_delta;
+		bool		txp_setup;
+		int		txp_requested;	/* Requested tx power in dBm */
+	} ah_txpower;
+
+	struct ath5k_nfcal_hist ah_nfcal_hist;
+
+	/* average beacon RSSI in our BSS (used by ANI) */
+	struct ewma_beacon_rssi	ah_beacon_rssi_avg;
+
+	/* noise floor from last periodic calibration */
+	s32			ah_noise_floor;
+
+	/* Calibration timestamp */
+	unsigned long		ah_cal_next_full;
+	unsigned long		ah_cal_next_short;
+	unsigned long		ah_cal_next_ani;
+
+	/* Calibration mask */
+	u8			ah_cal_mask;
+
+	/*
+	 * Function pointers
+	 */
+	int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+		unsigned int, unsigned int, int, enum ath5k_pkt_type,
+		unsigned int, unsigned int, unsigned int, unsigned int,
+		unsigned int, unsigned int, unsigned int, unsigned int);
+	int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+		struct ath5k_tx_status *);
+	int (*ah_proc_rx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+		struct ath5k_rx_status *);
+};
+
+struct ath_bus_ops {
+	enum ath_bus_type ath_bus_type;
+	void (*read_cachesize)(struct ath_common *common, int *csz);
+	bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
+	int (*eeprom_read_mac)(struct ath5k_hw *ah, u8 *mac);
+};
+
+/*
+ * Prototypes
+ */
+extern const struct ieee80211_ops ath5k_hw_ops;
+
+/* Initialization and detach functions */
+int ath5k_hw_init(struct ath5k_hw *ah);
+void ath5k_hw_deinit(struct ath5k_hw *ah);
+
+int ath5k_sysfs_register(struct ath5k_hw *ah);
+void ath5k_sysfs_unregister(struct ath5k_hw *ah);
+
+/*Chip id helper functions */
+int ath5k_hw_read_srev(struct ath5k_hw *ah);
+
+/* LED functions */
+int ath5k_init_leds(struct ath5k_hw *ah);
+void ath5k_led_enable(struct ath5k_hw *ah);
+void ath5k_led_off(struct ath5k_hw *ah);
+void ath5k_unregister_leds(struct ath5k_hw *ah);
+
+
+/* Reset Functions */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+int ath5k_hw_on_hold(struct ath5k_hw *ah);
+int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+	   struct ieee80211_channel *channel, bool fast, bool skip_pcu);
+int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
+			      bool is_set);
+/* Power management functions */
+
+
+/* Clock rate related functions */
+unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec);
+unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock);
+void ath5k_hw_set_clockrate(struct ath5k_hw *ah);
+
+
+/* DMA Related Functions */
+void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
+u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
+int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue);
+u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
+				u32 phys_addr);
+int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
+/* Interrupt handling */
+bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
+int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
+enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask);
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah);
+/* Init/Stop functions */
+void ath5k_hw_dma_init(struct ath5k_hw *ah);
+int ath5k_hw_dma_stop(struct ath5k_hw *ah);
+
+/* EEPROM access functions */
+int ath5k_eeprom_init(struct ath5k_hw *ah);
+void ath5k_eeprom_detach(struct ath5k_hw *ah);
+int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel);
+
+/* Protocol Control Unit Functions */
+/* Helpers */
+int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, enum nl80211_band band,
+		int len, struct ieee80211_rate *rate, bool shortpre);
+unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah);
+unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah);
+int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode);
+void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class);
+/* RX filter control*/
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
+void ath5k_hw_set_bssid(struct ath5k_hw *ah);
+void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
+/* Receive (DRU) start/stop functions */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
+/* Beacon control functions */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
+void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
+void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon,
+							u32 interval);
+bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval);
+/* Init function */
+void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode);
+
+/* Queue Control Unit, DFS Control Unit Functions */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+			       struct ath5k_txq_info *queue_info);
+int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+			       const struct ath5k_txq_info *queue_info);
+int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
+			    enum ath5k_tx_queue queue_type,
+			    struct ath5k_txq_info *queue_info);
+void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
+				  unsigned int queue);
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time);
+/* Init function */
+int ath5k_hw_init_queues(struct ath5k_hw *ah);
+
+/* Hardware Descriptor Functions */
+int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
+int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+			   u32 size, unsigned int flags);
+int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+	unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+	u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3);
+
+
+/* GPIO Functions */
+void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
+int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
+u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
+int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
+void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+			    u32 interrupt_level);
+
+
+/* RFkill Functions */
+void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
+void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
+
+
+/* Misc functions TODO: Cleanup */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
+int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
+int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
+
+
+/* Initial register settings functions */
+int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+
+
+/* PHY functions */
+/* Misc PHY functions */
+u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band);
+int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Gain_F optimization */
+enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
+int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
+/* PHY/RF channel functions */
+bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel);
+/* PHY calibration */
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
+int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
+			   struct ieee80211_channel *channel);
+void ath5k_hw_update_noise_floor(struct ath5k_hw *ah);
+/* Spur mitigation */
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				  struct ieee80211_channel *channel);
+/* Antenna control */
+void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
+void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode);
+/* TX power setup */
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
+/* Init function */
+int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+				u8 mode, bool fast);
+
+/*
+ * Functions used internally
+ */
+
+static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
+{
+	return &ah->common;
+}
+
+static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
+{
+	return &(ath5k_hw_common(ah)->regulatory);
+}
+
+#ifdef CONFIG_ATH5K_AHB
+#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
+
+static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
+{
+	/* On AR2315 and AR2317 the PCI clock domain registers
+	 * are outside of the WMAC register space */
+	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
+	    (ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
+		return AR5K_AR2315_PCI_BASE + reg;
+
+	return ah->iobase + reg;
+}
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+	return ioread32(ath5k_ahb_reg(ah, reg));
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+	iowrite32(val, ath5k_ahb_reg(ah, reg));
+}
+
+#else
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+	return ioread32(ah->iobase + reg);
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+	iowrite32(val, ah->iobase + reg);
+}
+
+#endif
+
+static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
+{
+	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
+}
+
+static inline void ath5k_read_cachesize(struct ath_common *common, int *csz)
+{
+	common->bus_ops->read_cachesize(common, csz);
+}
+
+static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data)
+{
+	struct ath_common *common = ath5k_hw_common(ah);
+	return common->bus_ops->eeprom_read(common, off, data);
+}
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+	u32 retval = 0, bit, i;
+
+	for (i = 0; i < bits; i++) {
+		bit = (val >> i) & 1;
+		retval = (retval << 1) | bit;
+	}
+
+	return retval;
+}
+
+#endif