Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 409 insertions, 0 deletions

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.h b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.h
new file mode 100644
index 000000000..f14e16a6a
--- /dev/null
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.h
@@ -0,0 +1,409 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
+	<http://rt2x00.serialmonkey.com>
+
+ */
+
+/*
+	Module: rt2x00usb
+	Abstract: Data structures for the rt2x00usb module.
+ */
+
+#ifndef RT2X00USB_H
+#define RT2X00USB_H
+
+#include <linux/usb.h>
+
+#define to_usb_device_intf(d) \
+({ \
+	struct usb_interface *intf = to_usb_interface(d); \
+	interface_to_usbdev(intf); \
+})
+
+/*
+ * For USB vendor requests we need to pass a timeout time in ms, for this we
+ * use the REGISTER_TIMEOUT, however when loading firmware or read EEPROM
+ * a higher value is required. In that case we use the REGISTER_TIMEOUT_FIRMWARE
+ * and EEPROM_TIMEOUT.
+ */
+#define REGISTER_TIMEOUT		100
+#define REGISTER_TIMEOUT_FIRMWARE	1000
+#define EEPROM_TIMEOUT			2000
+
+/*
+ * Cache size
+ */
+#define CSR_CACHE_SIZE			64
+
+/*
+ * USB request types.
+ */
+#define USB_VENDOR_REQUEST	( USB_TYPE_VENDOR | USB_RECIP_DEVICE )
+#define USB_VENDOR_REQUEST_IN	( USB_DIR_IN | USB_VENDOR_REQUEST )
+#define USB_VENDOR_REQUEST_OUT	( USB_DIR_OUT | USB_VENDOR_REQUEST )
+
+/**
+ * enum rt2x00usb_vendor_request: USB vendor commands.
+ */
+enum rt2x00usb_vendor_request {
+	USB_DEVICE_MODE = 1,
+	USB_SINGLE_WRITE = 2,
+	USB_SINGLE_READ = 3,
+	USB_MULTI_WRITE = 6,
+	USB_MULTI_READ = 7,
+	USB_EEPROM_WRITE = 8,
+	USB_EEPROM_READ = 9,
+	USB_LED_CONTROL = 10, /* RT73USB */
+	USB_RX_CONTROL = 12,
+};
+
+/**
+ * enum rt2x00usb_mode_offset: Device modes offset.
+ */
+enum rt2x00usb_mode_offset {
+	USB_MODE_RESET = 1,
+	USB_MODE_UNPLUG = 2,
+	USB_MODE_FUNCTION = 3,
+	USB_MODE_TEST = 4,
+	USB_MODE_SLEEP = 7,	/* RT73USB */
+	USB_MODE_FIRMWARE = 8,	/* RT73USB */
+	USB_MODE_WAKEUP = 9,	/* RT73USB */
+	USB_MODE_AUTORUN = 17, /* RT2800USB */
+};
+
+/**
+ * rt2x00usb_vendor_request - Send register command to device
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register offset to perform action on
+ * @value: Value to write to device
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * This is the main function to communicate with the device,
+ * the &buffer argument _must_ either be NULL or point to
+ * a buffer allocated by kmalloc. Failure to do so can lead
+ * to unexpected behavior depending on the architecture.
+ */
+int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev,
+			     const u8 request, const u8 requesttype,
+			     const u16 offset, const u16 value,
+			     void *buffer, const u16 buffer_length,
+			     const int timeout);
+
+/**
+ * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ *
+ * This function will use a previously with kmalloc allocated cache
+ * to communicate with the device. The contents of the buffer pointer
+ * will be copied to this cache when writing, or read from the cache
+ * when reading.
+ * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with
+ * kmalloc. Hence the reason for using a previously allocated cache
+ * which has been allocated properly.
+ */
+int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev,
+				  const u8 request, const u8 requesttype,
+				  const u16 offset, void *buffer,
+				  const u16 buffer_length);
+
+/**
+ * rt2x00usb_vendor_request_buff - Send register command to device (buffered)
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @requesttype: Request type &USB_VENDOR_REQUEST_*
+ * @offset: Register offset to perform action on
+ * @buffer: Buffer where information will be read/written to by device
+ * @buffer_length: Size of &buffer
+ * @timeout: Operation timeout
+ *
+ * A version of &rt2x00usb_vendor_request_buff which must be called
+ * if the usb_cache_mutex is already held.
+ */
+int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev,
+				   const u8 request, const u8 requesttype,
+				   const u16 offset, void *buffer,
+				   const u16 buffer_length, const int timeout);
+
+/**
+ * rt2x00usb_vendor_request_sw - Send single register command to device
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @request: USB vendor command (See &enum rt2x00usb_vendor_request)
+ * @offset: Register offset to perform action on
+ * @value: Value to write to device
+ * @timeout: Operation timeout
+ *
+ * Simple wrapper around rt2x00usb_vendor_request to write a single
+ * command to the device. Since we don't use the buffer argument we
+ * don't have to worry about kmalloc here.
+ */
+static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev,
+					      const u8 request,
+					      const u16 offset,
+					      const u16 value,
+					      const int timeout)
+{
+	return rt2x00usb_vendor_request(rt2x00dev, request,
+					USB_VENDOR_REQUEST_OUT, offset,
+					value, NULL, 0, timeout);
+}
+
+/**
+ * rt2x00usb_eeprom_read - Read eeprom from device
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ * @eeprom: Pointer to eeprom array to store the information in
+ * @length: Number of bytes to read from the eeprom
+ *
+ * Simple wrapper around rt2x00usb_vendor_request to read the eeprom
+ * from the device. Note that the eeprom argument _must_ be allocated using
+ * kmalloc for correct handling inside the kernel USB layer.
+ */
+static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev,
+					__le16 *eeprom, const u16 length)
+{
+	return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ,
+					USB_VENDOR_REQUEST_IN, 0, 0,
+					eeprom, length, EEPROM_TIMEOUT);
+}
+
+/**
+ * rt2x00usb_register_read - Read 32bit register word
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ *
+ * This function is a simple wrapper for 32bit register access
+ * through rt2x00usb_vendor_request_buff().
+ */
+static inline u32 rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev,
+					  const unsigned int offset)
+{
+	__le32 reg = 0;
+	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
+				      USB_VENDOR_REQUEST_IN, offset,
+				      &reg, sizeof(reg));
+	return le32_to_cpu(reg);
+}
+
+/**
+ * rt2x00usb_register_read_lock - Read 32bit register word
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ *
+ * This function is a simple wrapper for 32bit register access
+ * through rt2x00usb_vendor_req_buff_lock().
+ */
+static inline u32 rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
+					       const unsigned int offset)
+{
+	__le32 reg = 0;
+	rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
+				       USB_VENDOR_REQUEST_IN, offset,
+				       &reg, sizeof(reg), REGISTER_TIMEOUT);
+	return le32_to_cpu(reg);
+}
+
+/**
+ * rt2x00usb_register_multiread - Read 32bit register words
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @value: Pointer to where register contents should be stored
+ * @length: Length of the data
+ *
+ * This function is a simple wrapper for 32bit register access
+ * through rt2x00usb_vendor_request_buff().
+ */
+static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev,
+						const unsigned int offset,
+						void *value, const u32 length)
+{
+	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
+				      USB_VENDOR_REQUEST_IN, offset,
+				      value, length);
+}
+
+/**
+ * rt2x00usb_register_write - Write 32bit register word
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @value: Data which should be written
+ *
+ * This function is a simple wrapper for 32bit register access
+ * through rt2x00usb_vendor_request_buff().
+ */
+static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev,
+					    const unsigned int offset,
+					    u32 value)
+{
+	__le32 reg = cpu_to_le32(value);
+	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
+				      USB_VENDOR_REQUEST_OUT, offset,
+				      &reg, sizeof(reg));
+}
+
+/**
+ * rt2x00usb_register_write_lock - Write 32bit register word
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @value: Data which should be written
+ *
+ * This function is a simple wrapper for 32bit register access
+ * through rt2x00usb_vendor_req_buff_lock().
+ */
+static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
+						 const unsigned int offset,
+						 u32 value)
+{
+	__le32 reg = cpu_to_le32(value);
+	rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
+				       USB_VENDOR_REQUEST_OUT, offset,
+				       &reg, sizeof(reg), REGISTER_TIMEOUT);
+}
+
+/**
+ * rt2x00usb_register_multiwrite - Write 32bit register words
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @value: Data which should be written
+ * @length: Length of the data
+ *
+ * This function is a simple wrapper for 32bit register access
+ * through rt2x00usb_vendor_request_buff().
+ */
+static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
+						 const unsigned int offset,
+						 const void *value,
+						 const u32 length)
+{
+	rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
+				      USB_VENDOR_REQUEST_OUT, offset,
+				      (void *)value, length);
+}
+
+/**
+ * rt2x00usb_regbusy_read - Read from register with busy check
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @field: Field to check if register is busy
+ * @reg: Pointer to where register contents should be stored
+ *
+ * This function will read the given register, and checks if the
+ * register is busy. If it is, it will sleep for a couple of
+ * microseconds before reading the register again. If the register
+ * is not read after a certain timeout, this function will return
+ * FALSE.
+ */
+int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev,
+			   const unsigned int offset,
+			   const struct rt2x00_field32 field,
+			   u32 *reg);
+
+/**
+ * rt2x00usb_register_read_async - Asynchronously read 32bit register word
+ * @rt2x00dev: Device pointer, see &struct rt2x00_dev.
+ * @offset: Register offset
+ * @callback: Functon to call when read completes.
+ *
+ * Submit a control URB to read a 32bit register. This safe to
+ * be called from atomic context.  The callback will be called
+ * when the URB completes. Otherwise the function is similar
+ * to rt2x00usb_register_read().
+ * When the callback function returns false, the memory will be cleaned up,
+ * when it returns true, the urb will be fired again.
+ */
+void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev,
+				   const unsigned int offset,
+				   bool (*callback)(struct rt2x00_dev*, int, u32));
+
+/*
+ * Radio handlers
+ */
+void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * struct queue_entry_priv_usb: Per entry USB specific information
+ *
+ * @urb: Urb structure used for device communication.
+ */
+struct queue_entry_priv_usb {
+	struct urb *urb;
+};
+
+/**
+ * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information
+ *
+ * The first section should match &struct queue_entry_priv_usb exactly.
+ * rt2500usb can use this structure to send a guardian byte when working
+ * with beacons.
+ *
+ * @urb: Urb structure used for device communication.
+ * @guardian_data: Set to 0, used for sending the guardian data.
+ * @guardian_urb: Urb structure used to send the guardian data.
+ */
+struct queue_entry_priv_usb_bcn {
+	struct urb *urb;
+
+	unsigned int guardian_data;
+	struct urb *guardian_urb;
+};
+
+/**
+ * rt2x00usb_kick_queue - Kick data queue
+ * @queue: Data queue to kick
+ *
+ * This will walk through all entries of the queue and push all pending
+ * frames to the hardware as a single burst.
+ */
+void rt2x00usb_kick_queue(struct data_queue *queue);
+
+/**
+ * rt2x00usb_flush_queue - Flush data queue
+ * @queue: Data queue to stop
+ * @drop: True to drop all pending frames.
+ *
+ * This will walk through all entries of the queue and will optionally
+ * kill all URB's which were send to the device, or at least wait until
+ * they have been returned from the device..
+ */
+void rt2x00usb_flush_queue(struct data_queue *queue, bool drop);
+
+/**
+ * rt2x00usb_watchdog - Watchdog for USB communication
+ * @rt2x00dev: Pointer to &struct rt2x00_dev
+ *
+ * Check the health of the USB communication and determine
+ * if timeouts have occurred. If this is the case, this function
+ * will reset all communication to restore functionality again.
+ */
+void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
+
+/*
+ * Device initialization handlers.
+ */
+void rt2x00usb_clear_entry(struct queue_entry *entry);
+int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev);
+void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev);
+
+/*
+ * USB driver handlers.
+ */
+int rt2x00usb_probe(struct usb_interface *usb_intf,
+		    const struct rt2x00_ops *ops);
+void rt2x00usb_disconnect(struct usb_interface *usb_intf);
+#ifdef CONFIG_PM
+int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
+int rt2x00usb_resume(struct usb_interface *usb_intf);
+#else
+#define rt2x00usb_suspend	NULL
+#define rt2x00usb_resume	NULL
+#endif /* CONFIG_PM */
+
+#endif /* RT2X00USB_H */