Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 350 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.h
new file mode 100644
index 000000000..99c6f7eef
--- /dev/null
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.h
@@ -0,0 +1,350 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright(c) 2009-2012  Realtek Corporation.*/
+
+#ifndef __REALTEK_FIRMWARE92S_H__
+#define __REALTEK_FIRMWARE92S_H__
+
+#define RTL8190_MAX_FIRMWARE_CODE_SIZE		64000
+#define RTL8190_MAX_RAW_FIRMWARE_CODE_SIZE	90000
+#define RTL8190_CPU_START_OFFSET		0x80
+/* Firmware Local buffer size. 64k */
+#define	MAX_FIRMWARE_CODE_SIZE			0xFF00
+
+#define	RT_8192S_FIRMWARE_HDR_SIZE		80
+#define RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE	32
+
+/* support till 64 bit bus width OS */
+#define MAX_DEV_ADDR_SIZE			8
+#define MAX_FIRMWARE_INFORMATION_SIZE		32
+#define MAX_802_11_HEADER_LENGTH		(40 + \
+						MAX_FIRMWARE_INFORMATION_SIZE)
+#define ENCRYPTION_MAX_OVERHEAD			128
+#define MAX_FRAGMENT_COUNT			8
+#define MAX_TRANSMIT_BUFFER_SIZE		(1600 + \
+						(MAX_802_11_HEADER_LENGTH + \
+						ENCRYPTION_MAX_OVERHEAD) *\
+						MAX_FRAGMENT_COUNT)
+
+#define H2C_TX_CMD_HDR_LEN			8
+
+/* The following DM control code are for Reg0x364, */
+#define	FW_DIG_ENABLE_CTL			BIT(0)
+#define	FW_HIGH_PWR_ENABLE_CTL			BIT(1)
+#define	FW_SS_CTL				BIT(2)
+#define	FW_RA_INIT_CTL				BIT(3)
+#define	FW_RA_BG_CTL				BIT(4)
+#define	FW_RA_N_CTL				BIT(5)
+#define	FW_PWR_TRK_CTL				BIT(6)
+#define	FW_IQK_CTL				BIT(7)
+#define	FW_FA_CTL				BIT(8)
+#define	FW_DRIVER_CTRL_DM_CTL			BIT(9)
+#define	FW_PAPE_CTL_BY_SW_HW			BIT(10)
+#define	FW_DISABLE_ALL_DM			0
+#define	FW_PWR_TRK_PARAM_CLR			0x0000ffff
+#define	FW_RA_PARAM_CLR				0xffff0000
+
+enum desc_packet_type {
+	DESC_PACKET_TYPE_INIT = 0,
+	DESC_PACKET_TYPE_NORMAL = 1,
+};
+
+/* 8-bytes alignment required */
+struct fw_priv {
+	/* --- long word 0 ---- */
+	/* 0x12: CE product, 0x92: IT product */
+	u8 signature_0;
+	/* 0x87: CE product, 0x81: IT product */
+	u8 signature_1;
+	/* 0x81: PCI-AP, 01:PCIe, 02: 92S-U,
+	 * 0x82: USB-AP, 0x12: 72S-U, 03:SDIO */
+	u8 hci_sel;
+	/* the same value as reigster value  */
+	u8 chip_version;
+	/* customer  ID low byte */
+	u8 customer_id_0;
+	/* customer  ID high byte */
+	u8 customer_id_1;
+	/* 0x11:  1T1R, 0x12: 1T2R,
+	 * 0x92: 1T2R turbo, 0x22: 2T2R */
+	u8 rf_config;
+	/* 4: 4EP, 6: 6EP, 11: 11EP */
+	u8 usb_ep_num;
+
+	/* --- long word 1 ---- */
+	/* regulatory class bit map 0 */
+	u8 regulatory_class_0;
+	/* regulatory class bit map 1 */
+	u8 regulatory_class_1;
+	/* regulatory class bit map 2 */
+	u8 regulatory_class_2;
+	/* regulatory class bit map 3 */
+	u8 regulatory_class_3;
+	/* 0:SWSI, 1:HWSI, 2:HWPI */
+	u8 rfintfs;
+	u8 def_nettype;
+	u8 rsvd010;
+	u8 rsvd011;
+
+	/* --- long word 2 ---- */
+	/* 0x00: normal, 0x03: MACLBK, 0x01: PHYLBK */
+	u8 lbk_mode;
+	/* 1: for MP use, 0: for normal
+	 * driver (to be discussed) */
+	u8 mp_mode;
+	u8 rsvd020;
+	u8 rsvd021;
+	u8 rsvd022;
+	u8 rsvd023;
+	u8 rsvd024;
+	u8 rsvd025;
+
+	/* --- long word 3 ---- */
+	/* QoS enable */
+	u8 qos_en;
+	/* 40MHz BW enable */
+	/* 4181 convert AMSDU to AMPDU, 0: disable */
+	u8 bw_40mhz_en;
+	u8 amsdu2ampdu_en;
+	/* 11n AMPDU enable */
+	u8 ampdu_en;
+	/* FW offloads, 0: driver handles */
+	u8 rate_control_offload;
+	/* FW offloads, 0: driver handles */
+	u8 aggregation_offload;
+	u8 rsvd030;
+	u8 rsvd031;
+
+	/* --- long word 4 ---- */
+	/* 1. FW offloads, 0: driver handles */
+	u8 beacon_offload;
+	/* 2. FW offloads, 0: driver handles */
+	u8 mlme_offload;
+	/* 3. FW offloads, 0: driver handles */
+	u8 hwpc_offload;
+	/* 4. FW offloads, 0: driver handles */
+	u8 tcp_checksum_offload;
+	/* 5. FW offloads, 0: driver handles */
+	u8 tcp_offload;
+	/* 6. FW offloads, 0: driver handles */
+	u8 ps_control_offload;
+	/* 7. FW offloads, 0: driver handles */
+	u8 wwlan_offload;
+	u8 rsvd040;
+
+	/* --- long word 5 ---- */
+	/* tcp tx packet length low byte */
+	u8 tcp_tx_frame_len_L;
+	/* tcp tx packet length high byte */
+	u8 tcp_tx_frame_len_H;
+	/* tcp rx packet length low byte */
+	u8 tcp_rx_frame_len_L;
+	/* tcp rx packet length high byte */
+	u8 tcp_rx_frame_len_H;
+	u8 rsvd050;
+	u8 rsvd051;
+	u8 rsvd052;
+	u8 rsvd053;
+};
+
+/* 8-byte alinment required */
+struct fw_hdr {
+
+	/* --- LONG WORD 0 ---- */
+	u16 signature;
+	/* 0x8000 ~ 0x8FFF for FPGA version,
+	 * 0x0000 ~ 0x7FFF for ASIC version, */
+	u16 version;
+	/* define the size of boot loader */
+	u32 dmem_size;
+
+
+	/* --- LONG WORD 1 ---- */
+	/* define the size of FW in IMEM */
+	u32 img_imem_size;
+	/* define the size of FW in SRAM */
+	u32 img_sram_size;
+
+	/* --- LONG WORD 2 ---- */
+	/* define the size of DMEM variable */
+	u32 fw_priv_size;
+	u32 rsvd0;
+
+	/* --- LONG WORD 3 ---- */
+	u32 rsvd1;
+	u32 rsvd2;
+
+	struct fw_priv fwpriv;
+
+} ;
+
+enum fw_status {
+	FW_STATUS_INIT = 0,
+	FW_STATUS_LOAD_IMEM = 1,
+	FW_STATUS_LOAD_EMEM = 2,
+	FW_STATUS_LOAD_DMEM = 3,
+	FW_STATUS_READY = 4,
+};
+
+struct rt_firmware {
+	struct fw_hdr *pfwheader;
+	enum fw_status fwstatus;
+	u16 firmwareversion;
+	u8 fw_imem[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u8 fw_emem[RTL8190_MAX_FIRMWARE_CODE_SIZE];
+	u32 fw_imem_len;
+	u32 fw_emem_len;
+	u8 sz_fw_tmpbuffer[RTL8190_MAX_RAW_FIRMWARE_CODE_SIZE];
+	u32 sz_fw_tmpbufferlen;
+	u16 cmdpacket_fragthresold;
+};
+
+struct h2c_set_pwrmode_parm {
+	u8 mode;
+	u8 flag_low_traffic_en;
+	u8 flag_lpnav_en;
+	u8 flag_rf_low_snr_en;
+	/* 1: dps, 0: 32k */
+	u8 flag_dps_en;
+	u8 bcn_rx_en;
+	u8 bcn_pass_cnt;
+	/* beacon TO (ms). ¡§=0¡¨ no limit. */
+	u8 bcn_to;
+	u16	bcn_itv;
+	/* only for VOIP mode. */
+	u8 app_itv;
+	u8 awake_bcn_itvl;
+	u8 smart_ps;
+	/* unit: 100 ms */
+	u8 bcn_pass_period;
+};
+
+struct h2c_joinbss_rpt_parm {
+	u8 opmode;
+	u8 ps_qos_info;
+	u8 bssid[6];
+	u16 bcnitv;
+	u16 aid;
+} ;
+
+struct h2c_wpa_ptk {
+	/* EAPOL-Key Key Confirmation Key (KCK) */
+	u8 kck[16];
+	/* EAPOL-Key Key Encryption Key (KEK) */
+	u8 kek[16];
+	/* Temporal Key 1 (TK1) */
+	u8 tk1[16];
+	union {
+		/* Temporal Key 2 (TK2) */
+		u8 tk2[16];
+		struct {
+			u8 tx_mic_key[8];
+			u8 rx_mic_key[8];
+		} athu;
+	} u;
+};
+
+struct h2c_wpa_two_way_parm {
+	/* algorithm TKIP or AES */
+	u8 pairwise_en_alg;
+	u8 group_en_alg;
+	struct h2c_wpa_ptk wpa_ptk_value;
+} ;
+
+enum h2c_cmd {
+	FW_H2C_SETPWRMODE = 0,
+	FW_H2C_JOINBSSRPT = 1,
+	FW_H2C_WOWLAN_UPDATE_GTK = 2,
+	FW_H2C_WOWLAN_UPDATE_IV = 3,
+	FW_H2C_WOWLAN_OFFLOAD = 4,
+};
+
+enum fw_h2c_cmd {
+	H2C_READ_MACREG_CMD,				/*0*/
+	H2C_WRITE_MACREG_CMD,
+	H2C_READBB_CMD,
+	H2C_WRITEBB_CMD,
+	H2C_READRF_CMD,
+	H2C_WRITERF_CMD,				/*5*/
+	H2C_READ_EEPROM_CMD,
+	H2C_WRITE_EEPROM_CMD,
+	H2C_READ_EFUSE_CMD,
+	H2C_WRITE_EFUSE_CMD,
+	H2C_READ_CAM_CMD,				/*10*/
+	H2C_WRITE_CAM_CMD,
+	H2C_SETBCNITV_CMD,
+	H2C_SETMBIDCFG_CMD,
+	H2C_JOINBSS_CMD,
+	H2C_DISCONNECT_CMD,				/*15*/
+	H2C_CREATEBSS_CMD,
+	H2C_SETOPMODE_CMD,
+	H2C_SITESURVEY_CMD,
+	H2C_SETAUTH_CMD,
+	H2C_SETKEY_CMD,					/*20*/
+	H2C_SETSTAKEY_CMD,
+	H2C_SETASSOCSTA_CMD,
+	H2C_DELASSOCSTA_CMD,
+	H2C_SETSTAPWRSTATE_CMD,
+	H2C_SETBASICRATE_CMD,				/*25*/
+	H2C_GETBASICRATE_CMD,
+	H2C_SETDATARATE_CMD,
+	H2C_GETDATARATE_CMD,
+	H2C_SETPHYINFO_CMD,
+	H2C_GETPHYINFO_CMD,				/*30*/
+	H2C_SETPHY_CMD,
+	H2C_GETPHY_CMD,
+	H2C_READRSSI_CMD,
+	H2C_READGAIN_CMD,
+	H2C_SETATIM_CMD,				/*35*/
+	H2C_SETPWRMODE_CMD,
+	H2C_JOINBSSRPT_CMD,
+	H2C_SETRATABLE_CMD,
+	H2C_GETRATABLE_CMD,
+	H2C_GETCCXREPORT_CMD,				/*40*/
+	H2C_GETDTMREPORT_CMD,
+	H2C_GETTXRATESTATICS_CMD,
+	H2C_SETUSBSUSPEND_CMD,
+	H2C_SETH2CLBK_CMD,
+	H2C_TMP1,					/*45*/
+	H2C_WOWLAN_UPDATE_GTK_CMD,
+	H2C_WOWLAN_FW_OFFLOAD,
+	H2C_TMP2,
+	H2C_TMP3,
+	H2C_WOWLAN_UPDATE_IV_CMD,			/*50*/
+	H2C_TMP4,
+};
+
+/* The following macros are used for FW
+ * CMD map and parameter updated. */
+#define FW_CMD_IO_CLR(rtlpriv, _bit)				\
+	do {							\
+		udelay(1000);					\
+		rtlpriv->rtlhal.fwcmd_iomap &= (~_bit);		\
+	} while (0)
+
+#define FW_CMD_IO_UPDATE(rtlpriv, _val)				\
+	rtlpriv->rtlhal.fwcmd_iomap = _val;
+
+#define FW_CMD_IO_SET(rtlpriv, _val)				\
+	do {							\
+		rtl_write_word(rtlpriv, LBUS_MON_ADDR, (u16)_val);	\
+		FW_CMD_IO_UPDATE(rtlpriv, _val);		\
+	} while (0)
+
+#define FW_CMD_PARA_SET(rtlpriv, _val)				\
+	do {							\
+		rtl_write_dword(rtlpriv, LBUS_ADDR_MASK, _val);	\
+		rtlpriv->rtlhal.fwcmd_ioparam = _val;		\
+	} while (0)
+
+#define FW_CMD_IO_QUERY(rtlpriv)				\
+	(u16)(rtlpriv->rtlhal.fwcmd_iomap)
+#define FW_CMD_IO_PARA_QUERY(rtlpriv)				\
+	((u32)(rtlpriv->rtlhal.fwcmd_ioparam))
+
+int rtl92s_download_fw(struct ieee80211_hw *hw);
+void rtl92s_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
+void rtl92s_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw,
+				      u8 mstatus, u8 ps_qosinfo);
+
+#endif
+