Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 121 insertions, 0 deletions

diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
new file mode 100644
index 000000000..2f6a7f8c9
--- /dev/null
+++ b/drivers/nvme/host/Kconfig
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NVME_CORE
+	tristate
+	select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY
+
+config BLK_DEV_NVME
+	tristate "NVM Express block device"
+	depends on PCI && BLOCK
+	select NVME_CORE
+	help
+	  The NVM Express driver is for solid state drives directly
+	  connected to the PCI or PCI Express bus.  If you know you
+	  don't have one of these, it is safe to answer N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvme.
+
+config NVME_MULTIPATH
+	bool "NVMe multipath support"
+	depends on NVME_CORE
+	help
+	   This option enables support for multipath access to NVMe
+	   subsystems.  If this option is enabled only a single
+	   /dev/nvmeXnY device will show up for each NVMe namespace,
+	   even if it is accessible through multiple controllers.
+
+config NVME_VERBOSE_ERRORS
+	bool "NVMe verbose error reporting"
+	depends on NVME_CORE
+	help
+	   This option enables verbose reporting for NVMe errors. The
+	   error translation table will grow the kernel image size by
+	   about 4 KB.
+
+config NVME_HWMON
+	bool "NVMe hardware monitoring"
+	depends on (NVME_CORE=y && HWMON=y) || (NVME_CORE=m && HWMON)
+	help
+	  This provides support for NVMe hardware monitoring. If enabled,
+	  a hardware monitoring device will be created for each NVMe drive
+	  in the system.
+
+config NVME_FABRICS
+	select NVME_CORE
+	tristate
+
+config NVME_RDMA
+	tristate "NVM Express over Fabrics RDMA host driver"
+	depends on INFINIBAND && INFINIBAND_ADDR_TRANS && BLOCK
+	select NVME_FABRICS
+	select SG_POOL
+	help
+	  This provides support for the NVMe over Fabrics protocol using
+	  the RDMA (Infiniband, RoCE, iWarp) transport.  This allows you
+	  to use remote block devices exported using the NVMe protocol set.
+
+	  To configure a NVMe over Fabrics controller use the nvme-cli tool
+	  from https://github.com/linux-nvme/nvme-cli.
+
+	  If unsure, say N.
+
+config NVME_FC
+	tristate "NVM Express over Fabrics FC host driver"
+	depends on BLOCK
+	depends on HAS_DMA
+	select NVME_FABRICS
+	select SG_POOL
+	help
+	  This provides support for the NVMe over Fabrics protocol using
+	  the FC transport.  This allows you to use remote block devices
+	  exported using the NVMe protocol set.
+
+	  To configure a NVMe over Fabrics controller use the nvme-cli tool
+	  from https://github.com/linux-nvme/nvme-cli.
+
+	  If unsure, say N.
+
+config NVME_TCP
+	tristate "NVM Express over Fabrics TCP host driver"
+	depends on INET
+	depends on BLOCK
+	select NVME_FABRICS
+	select CRYPTO
+	select CRYPTO_CRC32C
+	help
+	  This provides support for the NVMe over Fabrics protocol using
+	  the TCP transport.  This allows you to use remote block devices
+	  exported using the NVMe protocol set.
+
+	  To configure a NVMe over Fabrics controller use the nvme-cli tool
+	  from https://github.com/linux-nvme/nvme-cli.
+
+	  If unsure, say N.
+
+config NVME_AUTH
+	bool "NVM Express over Fabrics In-Band Authentication"
+	depends on NVME_CORE
+	select NVME_COMMON
+	select CRYPTO
+	select CRYPTO_HMAC
+	select CRYPTO_SHA256
+	select CRYPTO_SHA512
+	select CRYPTO_DH
+	select CRYPTO_DH_RFC7919_GROUPS
+	help
+	  This provides support for NVMe over Fabrics In-Band Authentication.
+
+	  If unsure, say N.
+
+config NVME_APPLE
+	tristate "Apple ANS2 NVM Express host driver"
+	depends on OF && BLOCK
+	depends on APPLE_RTKIT && APPLE_SART
+	depends on ARCH_APPLE || COMPILE_TEST
+	select NVME_CORE
+	help
+	  This provides support for the NVMe controller embedded in Apple SoCs
+	  such as the M1.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvme-apple.