Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 155 insertions, 0 deletions

diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
new file mode 100644
index 000000000..f1b5160cb
--- /dev/null
+++ b/drivers/pcmcia/sa1111_lubbock.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/pcmcia/pxa2xx_lubbock.c
+ *
+ * Author:	George Davis
+ * Created:	Jan 10, 2002
+ * Copyright:	MontaVista Software Inc.
+ *
+ * Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
+ *
+ * Lubbock PCMCIA specific routines.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/hardware/sa1111.h>
+#include <asm/mach-types.h>
+
+#include "sa1111_generic.h"
+#include "max1600.h"
+
+static int lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	struct max1600 *m;
+	int ret;
+
+	ret = max1600_init(skt->socket.dev.parent, &m,
+			   skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
+			   MAX1600_CODE_HIGH);
+	if (ret == 0)
+		skt->driver_data = m;
+
+	return ret;
+}
+
+static int
+lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	struct max1600 *m = skt->driver_data;
+	int ret = 0;
+
+	/* Lubbock uses the Maxim MAX1602, with the following connections:
+	 *
+	 * Socket 0 (PCMCIA):
+	 *	MAX1602	Lubbock		Register
+	 *	Pin	Signal
+	 *	-----	-------		----------------------
+	 *	A0VPP	S0_PWR0		SA-1111 GPIO A<0>
+	 *	A1VPP	S0_PWR1		SA-1111 GPIO A<1>
+	 *	A0VCC	S0_PWR2		SA-1111 GPIO A<2>
+	 *	A1VCC	S0_PWR3		SA-1111 GPIO A<3>
+	 *	VX	VCC
+	 *	VY	+3.3V
+	 *	12IN	+12V
+	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
+	 *
+	 * Socket 1 (CF):
+	 *	MAX1602	Lubbock		Register
+	 *	Pin	Signal
+	 *	-----	-------		----------------------
+	 *	A0VPP	GND		VPP is not connected
+	 *	A1VPP	GND		VPP is not connected
+	 *	A0VCC	S1_PWR0		MISC_WR<14>
+	 *	A1VCC	S1_PWR1		MISC_WR<15>
+	 *	VX	VCC
+	 *	VY	+3.3V
+	 *	12IN	GND		VPP is not connected
+	 *	CODE	+3.3V		Cirrus  Code, CODE = High (VY)
+	 *
+	 */
+
+ again:
+	switch (skt->nr) {
+	case 0:
+	case 1:
+		break;
+
+	default:
+		ret = -1;
+	}
+
+	if (ret == 0)
+		ret = sa1111_pcmcia_configure_socket(skt, state);
+	if (ret == 0)
+		ret = max1600_configure(m, state->Vcc, state->Vpp);
+
+#if 1
+	if (ret == 0 && state->Vcc == 33) {
+		struct pcmcia_state new_state;
+
+		/*
+		 * HACK ALERT:
+		 * We can't sense the voltage properly on Lubbock before
+		 * actually applying some power to the socket (catch 22).
+		 * Resense the socket Voltage Sense pins after applying
+		 * socket power.
+		 *
+		 * Note: It takes about 2.5ms for the MAX1602 VCC output
+		 * to rise.
+		 */
+		mdelay(3);
+
+		sa1111_pcmcia_socket_state(skt, &new_state);
+
+		if (!new_state.vs_3v && !new_state.vs_Xv) {
+			/*
+			 * Switch to 5V,  Configure socket with 5V voltage
+			 */
+			max1600_configure(m, 0, 0);
+
+			/*
+			 * It takes about 100ms to turn off Vcc.
+			 */
+			mdelay(100);
+
+			/*
+			 * We need to hack around the const qualifier as
+			 * well to keep this ugly workaround localized and
+			 * not force it to the rest of the code. Barf bags
+			 * available in the seat pocket in front of you!
+			 */
+			((socket_state_t *)state)->Vcc = 50;
+			((socket_state_t *)state)->Vpp = 50;
+			goto again;
+		}
+	}
+#endif
+
+	return ret;
+}
+
+static struct pcmcia_low_level lubbock_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+	.hw_init		= lubbock_pcmcia_hw_init,
+	.configure_socket	= lubbock_pcmcia_configure_socket,
+	.first			= 0,
+	.nr			= 2,
+};
+
+#include "pxa2xx_base.h"
+
+int pcmcia_lubbock_init(struct sa1111_dev *sadev)
+{
+	pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
+	pxa2xx_configure_sockets(&sadev->dev, &lubbock_pcmcia_ops);
+	return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
+				 pxa2xx_drv_pcmcia_add_one);
+}
+
+MODULE_LICENSE("GPL");