Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 2342 insertions, 0 deletions

diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
new file mode 100644
index 000000000..853958fb2
--- /dev/null
+++ b/drivers/phy/freescale/Kconfig
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+if (ARCH_MXC && ARM64) || COMPILE_TEST
+
+config PHY_FSL_IMX8MQ_USB
+	tristate "Freescale i.MX8M USB3 PHY"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	default ARCH_MXC && ARM64
+
+config PHY_MIXEL_LVDS_PHY
+	tristate "Mixel LVDS PHY support"
+	depends on OF
+	select GENERIC_PHY
+	select REGMAP_MMIO
+	help
+	  Enable this to add support for the Mixel LVDS PHY as found
+	  on NXP's i.MX8qm SoC.
+
+config PHY_MIXEL_MIPI_DPHY
+	tristate "Mixel MIPI DSI PHY support"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	select GENERIC_PHY_MIPI_DPHY
+	select REGMAP_MMIO
+	help
+	  Enable this to add support for the Mixel DSI PHY as found
+	  on NXP's i.MX8 family of SOCs.
+
+config PHY_FSL_IMX8M_PCIE
+	tristate "Freescale i.MX8M PCIE PHY"
+	depends on OF && HAS_IOMEM
+	select GENERIC_PHY
+	help
+	  Enable this to add support for the PCIE PHY as found on
+	  i.MX8M family of SOCs.
+
+endif
+
+config PHY_FSL_LYNX_28G
+	tristate "Freescale Layerscape Lynx 28G SerDes PHY support"
+	depends on OF
+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this to add support for the Lynx SerDes 28G PHY as
+	  found on NXP's Layerscape platforms such as LX2160A.
+	  Used to change the protocol running on SerDes lanes at runtime.
+	  Only useful for a restricted set of Ethernet protocols.
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
new file mode 100644
index 000000000..cedb328bc
--- /dev/null
+++ b/drivers/phy/freescale/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_PHY_FSL_IMX8MQ_USB)	+= phy-fsl-imx8mq-usb.o
+obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)	+= phy-fsl-imx8qm-lvds-phy.o
+obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
+obj-$(CONFIG_PHY_FSL_IMX8M_PCIE)	+= phy-fsl-imx8m-pcie.o
+obj-$(CONFIG_PHY_FSL_LYNX_28G)		+= phy-fsl-lynx-28g.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
new file mode 100644
index 000000000..e625b3288
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -0,0 +1,749 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017,2018 NXP
+ * Copyright 2019 Purism SPC
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/firmware/imx/ipc.h>
+#include <linux/firmware/imx/svc/misc.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+
+/* Control and Status Registers(CSR) */
+#define PHY_CTRL			0x00
+#define  CCM_MASK			GENMASK(7, 5)
+#define  CCM(n)				FIELD_PREP(CCM_MASK, (n))
+#define  CCM_1_2V			0x5
+#define  CA_MASK			GENMASK(4, 2)
+#define  CA_3_51MA			0x4
+#define  CA(n)				FIELD_PREP(CA_MASK, (n))
+#define  RFB				BIT(1)
+#define  LVDS_EN			BIT(0)
+
+/* DPHY registers */
+#define DPHY_PD_DPHY			0x00
+#define DPHY_M_PRG_HS_PREPARE		0x04
+#define DPHY_MC_PRG_HS_PREPARE		0x08
+#define DPHY_M_PRG_HS_ZERO		0x0c
+#define DPHY_MC_PRG_HS_ZERO		0x10
+#define DPHY_M_PRG_HS_TRAIL		0x14
+#define DPHY_MC_PRG_HS_TRAIL		0x18
+#define DPHY_PD_PLL			0x1c
+#define DPHY_TST			0x20
+#define DPHY_CN				0x24
+#define DPHY_CM				0x28
+#define DPHY_CO				0x2c
+#define DPHY_LOCK			0x30
+#define DPHY_LOCK_BYP			0x34
+#define DPHY_REG_BYPASS_PLL		0x4C
+
+#define MBPS(x) ((x) * 1000000)
+
+#define DATA_RATE_MAX_SPEED MBPS(1500)
+#define DATA_RATE_MIN_SPEED MBPS(80)
+
+#define PLL_LOCK_SLEEP 10
+#define PLL_LOCK_TIMEOUT 1000
+
+#define CN_BUF	0xcb7a89c0
+#define CO_BUF	0x63
+#define CM(x)	(				  \
+		((x) <	32) ? 0xe0 | ((x) - 16) : \
+		((x) <	64) ? 0xc0 | ((x) - 32) : \
+		((x) < 128) ? 0x80 | ((x) - 64) : \
+		((x) - 128))
+#define CN(x)	(((x) == 1) ? 0x1f : (((CN_BUF) >> ((x) - 1)) & 0x1f))
+#define CO(x)	((CO_BUF) >> (8 - (x)) & 0x03)
+
+/* PHY power on is active low */
+#define PWR_ON	0
+#define PWR_OFF	1
+
+#define MIN_VCO_FREQ 640000000
+#define MAX_VCO_FREQ 1500000000
+
+#define MIN_LVDS_REFCLK_FREQ 24000000
+#define MAX_LVDS_REFCLK_FREQ 150000000
+
+enum mixel_dphy_devtype {
+	MIXEL_IMX8MQ,
+	MIXEL_IMX8QXP,
+};
+
+struct mixel_dphy_devdata {
+	u8 reg_tx_rcal;
+	u8 reg_auto_pd_en;
+	u8 reg_rxlprp;
+	u8 reg_rxcdrp;
+	u8 reg_rxhs_settle;
+	bool is_combo;	/* MIPI DPHY and LVDS PHY combo */
+};
+
+static const struct mixel_dphy_devdata mixel_dphy_devdata[] = {
+	[MIXEL_IMX8MQ] = {
+		.reg_tx_rcal = 0x38,
+		.reg_auto_pd_en = 0x3c,
+		.reg_rxlprp = 0x40,
+		.reg_rxcdrp = 0x44,
+		.reg_rxhs_settle = 0x48,
+		.is_combo = false,
+	},
+	[MIXEL_IMX8QXP] = {
+		.is_combo = true,
+	},
+};
+
+struct mixel_dphy_cfg {
+	/* DPHY PLL parameters */
+	u32 cm;
+	u32 cn;
+	u32 co;
+	/* DPHY register values */
+	u8 mc_prg_hs_prepare;
+	u8 m_prg_hs_prepare;
+	u8 mc_prg_hs_zero;
+	u8 m_prg_hs_zero;
+	u8 mc_prg_hs_trail;
+	u8 m_prg_hs_trail;
+	u8 rxhs_settle;
+};
+
+struct mixel_dphy_priv {
+	struct mixel_dphy_cfg cfg;
+	struct regmap *regmap;
+	struct regmap *lvds_regmap;
+	struct clk *phy_ref_clk;
+	const struct mixel_dphy_devdata *devdata;
+	struct imx_sc_ipc *ipc_handle;
+	bool is_slave;
+	int id;
+};
+
+static const struct regmap_config mixel_dphy_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = DPHY_REG_BYPASS_PLL,
+	.name = "mipi-dphy",
+};
+
+static int phy_write(struct phy *phy, u32 value, unsigned int reg)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regmap_write(priv->regmap, reg, value);
+	if (ret < 0)
+		dev_err(&phy->dev, "Failed to write DPHY reg %d: %d\n", reg,
+			ret);
+	return ret;
+}
+
+/*
+ * Find a ratio close to the desired one using continued fraction
+ * approximation ending either at exact match or maximum allowed
+ * nominator, denominator.
+ */
+static void get_best_ratio(u32 *pnum, u32 *pdenom, u32 max_n, u32 max_d)
+{
+	u32 a = *pnum;
+	u32 b = *pdenom;
+	u32 c;
+	u32 n[] = {0, 1};
+	u32 d[] = {1, 0};
+	u32 whole;
+	unsigned int i = 1;
+
+	while (b) {
+		i ^= 1;
+		whole = a / b;
+		n[i] += (n[i ^ 1] * whole);
+		d[i] += (d[i ^ 1] * whole);
+		if ((n[i] > max_n) || (d[i] > max_d)) {
+			i ^= 1;
+			break;
+		}
+		c = a - (b * whole);
+		a = b;
+		b = c;
+	}
+	*pnum = n[i];
+	*pdenom = d[i];
+}
+
+static int mixel_dphy_config_from_opts(struct phy *phy,
+	       struct phy_configure_opts_mipi_dphy *dphy_opts,
+	       struct mixel_dphy_cfg *cfg)
+{
+	struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+	unsigned long ref_clk = clk_get_rate(priv->phy_ref_clk);
+	u32 lp_t, numerator, denominator;
+	unsigned long long tmp;
+	u32 n;
+	int i;
+
+	if (dphy_opts->hs_clk_rate > DATA_RATE_MAX_SPEED ||
+	    dphy_opts->hs_clk_rate < DATA_RATE_MIN_SPEED)
+		return -EINVAL;
+
+	numerator = dphy_opts->hs_clk_rate;
+	denominator = ref_clk;
+	get_best_ratio(&numerator, &denominator, 255, 256);
+	if (!numerator || !denominator) {
+		dev_err(&phy->dev, "Invalid %d/%d for %ld/%ld\n",
+			numerator, denominator,
+			dphy_opts->hs_clk_rate, ref_clk);
+		return -EINVAL;
+	}
+
+	while ((numerator < 16) && (denominator <= 128)) {
+		numerator <<= 1;
+		denominator <<= 1;
+	}
+	/*
+	 * CM ranges between 16 and 255
+	 * CN ranges between 1 and 32
+	 * CO is power of 2: 1, 2, 4, 8
+	 */
+	i = __ffs(denominator);
+	if (i > 3)
+		i = 3;
+	cfg->cn = denominator >> i;
+	cfg->co = 1 << i;
+	cfg->cm = numerator;
+
+	if (cfg->cm < 16 || cfg->cm > 255 ||
+	    cfg->cn < 1 || cfg->cn > 32 ||
+	    cfg->co < 1 || cfg->co > 8) {
+		dev_err(&phy->dev, "Invalid CM/CN/CO values: %u/%u/%u\n",
+			cfg->cm, cfg->cn, cfg->co);
+		dev_err(&phy->dev, "for hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
+			dphy_opts->hs_clk_rate, ref_clk,
+			numerator, denominator);
+		return -EINVAL;
+	}
+
+	dev_dbg(&phy->dev, "hs_clk/ref_clk=%ld/%ld ~ %d/%d\n",
+		dphy_opts->hs_clk_rate, ref_clk, numerator, denominator);
+
+	/* LP clock period */
+	tmp = 1000000000000LL;
+	do_div(tmp, dphy_opts->lp_clk_rate); /* ps */
+	if (tmp > ULONG_MAX)
+		return -EINVAL;
+
+	lp_t = tmp;
+	dev_dbg(&phy->dev, "LP clock %lu, period: %u ps\n",
+		dphy_opts->lp_clk_rate, lp_t);
+
+	/* hs_prepare: in lp clock periods */
+	if (2 * dphy_opts->hs_prepare > 5 * lp_t) {
+		dev_err(&phy->dev,
+			"hs_prepare (%u) > 2.5 * lp clock period (%u)\n",
+			dphy_opts->hs_prepare, lp_t);
+		return -EINVAL;
+	}
+	/* 00: lp_t, 01: 1.5 * lp_t, 10: 2 * lp_t, 11: 2.5 * lp_t */
+	if (dphy_opts->hs_prepare < lp_t) {
+		n = 0;
+	} else {
+		tmp = 2 * (dphy_opts->hs_prepare - lp_t);
+		do_div(tmp, lp_t);
+		n = tmp;
+	}
+	cfg->m_prg_hs_prepare = n;
+
+	/* clk_prepare: in lp clock periods */
+	if (2 * dphy_opts->clk_prepare > 3 * lp_t) {
+		dev_err(&phy->dev,
+			"clk_prepare (%u) > 1.5 * lp clock period (%u)\n",
+			dphy_opts->clk_prepare, lp_t);
+		return -EINVAL;
+	}
+	/* 00: lp_t, 01: 1.5 * lp_t */
+	cfg->mc_prg_hs_prepare = dphy_opts->clk_prepare > lp_t ? 1 : 0;
+
+	/* hs_zero: formula from NXP BSP */
+	n = (144 * (dphy_opts->hs_clk_rate / 1000000) - 47500) / 10000;
+	cfg->m_prg_hs_zero = n < 1 ? 1 : n;
+
+	/* clk_zero: formula from NXP BSP */
+	n = (34 * (dphy_opts->hs_clk_rate / 1000000) - 2500) / 1000;
+	cfg->mc_prg_hs_zero = n < 1 ? 1 : n;
+
+	/* clk_trail, hs_trail: formula from NXP BSP */
+	n = (103 * (dphy_opts->hs_clk_rate / 1000000) + 10000) / 10000;
+	if (n > 15)
+		n = 15;
+	if (n < 1)
+		n = 1;
+	cfg->m_prg_hs_trail = n;
+	cfg->mc_prg_hs_trail = n;
+
+	/* rxhs_settle: formula from NXP BSP */
+	if (dphy_opts->hs_clk_rate < MBPS(80))
+		cfg->rxhs_settle = 0x0d;
+	else if (dphy_opts->hs_clk_rate < MBPS(90))
+		cfg->rxhs_settle = 0x0c;
+	else if (dphy_opts->hs_clk_rate < MBPS(125))
+		cfg->rxhs_settle = 0x0b;
+	else if (dphy_opts->hs_clk_rate < MBPS(150))
+		cfg->rxhs_settle = 0x0a;
+	else if (dphy_opts->hs_clk_rate < MBPS(225))
+		cfg->rxhs_settle = 0x09;
+	else if (dphy_opts->hs_clk_rate < MBPS(500))
+		cfg->rxhs_settle = 0x08;
+	else
+		cfg->rxhs_settle = 0x07;
+
+	dev_dbg(&phy->dev, "phy_config: %u %u %u %u %u %u %u\n",
+		cfg->m_prg_hs_prepare, cfg->mc_prg_hs_prepare,
+		cfg->m_prg_hs_zero, cfg->mc_prg_hs_zero,
+		cfg->m_prg_hs_trail, cfg->mc_prg_hs_trail,
+		cfg->rxhs_settle);
+
+	return 0;
+}
+
+static void mixel_phy_set_hs_timings(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	phy_write(phy, priv->cfg.m_prg_hs_prepare, DPHY_M_PRG_HS_PREPARE);
+	phy_write(phy, priv->cfg.mc_prg_hs_prepare, DPHY_MC_PRG_HS_PREPARE);
+	phy_write(phy, priv->cfg.m_prg_hs_zero, DPHY_M_PRG_HS_ZERO);
+	phy_write(phy, priv->cfg.mc_prg_hs_zero, DPHY_MC_PRG_HS_ZERO);
+	phy_write(phy, priv->cfg.m_prg_hs_trail, DPHY_M_PRG_HS_TRAIL);
+	phy_write(phy, priv->cfg.mc_prg_hs_trail, DPHY_MC_PRG_HS_TRAIL);
+	phy_write(phy, priv->cfg.rxhs_settle, priv->devdata->reg_rxhs_settle);
+}
+
+static int mixel_dphy_set_pll_params(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+	if (priv->cfg.cm < 16 || priv->cfg.cm > 255 ||
+	    priv->cfg.cn < 1 || priv->cfg.cn > 32 ||
+	    priv->cfg.co < 1 || priv->cfg.co > 8) {
+		dev_err(&phy->dev, "Invalid CM/CN/CO values! (%u/%u/%u)\n",
+			priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+		return -EINVAL;
+	}
+	dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n",
+		priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+	phy_write(phy, CM(priv->cfg.cm), DPHY_CM);
+	phy_write(phy, CN(priv->cfg.cn), DPHY_CN);
+	phy_write(phy, CO(priv->cfg.co), DPHY_CO);
+	return 0;
+}
+
+static int
+mixel_dphy_configure_mipi_dphy(struct phy *phy, union phy_configure_opts *opts)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	struct mixel_dphy_cfg cfg = { 0 };
+	int ret;
+
+	ret = mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+	if (ret)
+		return ret;
+
+	/* Update the configuration */
+	memcpy(&priv->cfg, &cfg, sizeof(struct mixel_dphy_cfg));
+
+	phy_write(phy, 0x00, DPHY_LOCK_BYP);
+	phy_write(phy, 0x01, priv->devdata->reg_tx_rcal);
+	phy_write(phy, 0x00, priv->devdata->reg_auto_pd_en);
+	phy_write(phy, 0x02, priv->devdata->reg_rxlprp);
+	phy_write(phy, 0x02, priv->devdata->reg_rxcdrp);
+	phy_write(phy, 0x25, DPHY_TST);
+
+	mixel_phy_set_hs_timings(phy);
+	ret = mixel_dphy_set_pll_params(phy);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int
+mixel_dphy_configure_lvds_phy(struct phy *phy, union phy_configure_opts *opts)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	struct phy_configure_opts_lvds *lvds_opts = &opts->lvds;
+	unsigned long data_rate;
+	unsigned long fvco;
+	u32 rsc;
+	u32 co;
+	int ret;
+
+	priv->is_slave = lvds_opts->is_slave;
+
+	/* LVDS interface pins */
+	regmap_write(priv->lvds_regmap, PHY_CTRL,
+		     CCM(CCM_1_2V) | CA(CA_3_51MA) | RFB);
+
+	/* enable MODE8 only for slave LVDS PHY */
+	rsc = priv->id ? IMX_SC_R_MIPI_1 : IMX_SC_R_MIPI_0;
+	ret = imx_sc_misc_set_control(priv->ipc_handle, rsc, IMX_SC_C_DUAL_MODE,
+				      lvds_opts->is_slave);
+	if (ret) {
+		dev_err(&phy->dev, "Failed to configure MODE8: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Choose an appropriate divider ratio to meet the requirement of
+	 * PLL VCO frequency range.
+	 *
+	 *  -----  640MHz ~ 1500MHz   ------------      ---------------
+	 * | VCO | ----------------> | CO divider | -> | LVDS data rate|
+	 *  -----       FVCO          ------------      ---------------
+	 *                            1/2/4/8 div     7 * differential_clk_rate
+	 */
+	data_rate = 7 * lvds_opts->differential_clk_rate;
+	for (co = 1; co <= 8; co *= 2) {
+		fvco = data_rate * co;
+
+		if (fvco >= MIN_VCO_FREQ)
+			break;
+	}
+
+	if (fvco < MIN_VCO_FREQ || fvco > MAX_VCO_FREQ) {
+		dev_err(&phy->dev, "VCO frequency %lu is out of range\n", fvco);
+		return -ERANGE;
+	}
+
+	/*
+	 * CO is configurable, while CN and CM are not,
+	 * as fixed ratios 1 and 7 are applied respectively.
+	 */
+	phy_write(phy, __ffs(co), DPHY_CO);
+
+	/* set reference clock rate */
+	clk_set_rate(priv->phy_ref_clk, lvds_opts->differential_clk_rate);
+
+	return ret;
+}
+
+static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+	if (!opts) {
+		dev_err(&phy->dev, "No configuration options\n");
+		return -EINVAL;
+	}
+
+	if (phy->attrs.mode == PHY_MODE_MIPI_DPHY)
+		return mixel_dphy_configure_mipi_dphy(phy, opts);
+	else if (phy->attrs.mode == PHY_MODE_LVDS)
+		return mixel_dphy_configure_lvds_phy(phy, opts);
+
+	dev_err(&phy->dev,
+		"Failed to configure PHY with invalid PHY mode: %d\n", phy->attrs.mode);
+
+	return -EINVAL;
+}
+
+static int
+mixel_dphy_validate_lvds_phy(struct phy *phy, union phy_configure_opts *opts)
+{
+	struct phy_configure_opts_lvds *lvds_cfg = &opts->lvds;
+
+	if (lvds_cfg->bits_per_lane_and_dclk_cycle != 7) {
+		dev_err(&phy->dev, "Invalid bits per LVDS data lane: %u\n",
+			lvds_cfg->bits_per_lane_and_dclk_cycle);
+		return -EINVAL;
+	}
+
+	if (lvds_cfg->lanes != 4) {
+		dev_err(&phy->dev, "Invalid LVDS data lanes: %u\n", lvds_cfg->lanes);
+		return -EINVAL;
+	}
+
+	if (lvds_cfg->differential_clk_rate < MIN_LVDS_REFCLK_FREQ ||
+	    lvds_cfg->differential_clk_rate > MAX_LVDS_REFCLK_FREQ) {
+		dev_err(&phy->dev,
+			"Invalid LVDS differential clock rate: %lu\n",
+			lvds_cfg->differential_clk_rate);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
+			       union phy_configure_opts *opts)
+{
+	if (mode == PHY_MODE_MIPI_DPHY) {
+		struct mixel_dphy_cfg mipi_dphy_cfg = { 0 };
+
+		return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy,
+						   &mipi_dphy_cfg);
+	} else if (mode == PHY_MODE_LVDS) {
+		return mixel_dphy_validate_lvds_phy(phy, opts);
+	}
+
+	dev_err(&phy->dev,
+		"Failed to validate PHY with invalid PHY mode: %d\n", mode);
+	return -EINVAL;
+}
+
+static int mixel_dphy_init(struct phy *phy)
+{
+	phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+	phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+	return 0;
+}
+
+static int mixel_dphy_exit(struct phy *phy)
+{
+	phy_write(phy, 0, DPHY_CM);
+	phy_write(phy, 0, DPHY_CN);
+	phy_write(phy, 0, DPHY_CO);
+
+	return 0;
+}
+
+static int mixel_dphy_power_on_mipi_dphy(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	u32 locked;
+	int ret;
+
+	phy_write(phy, PWR_ON, DPHY_PD_PLL);
+	ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
+				       locked, PLL_LOCK_SLEEP,
+				       PLL_LOCK_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&phy->dev, "Could not get DPHY lock (%d)!\n", ret);
+		return ret;
+	}
+	phy_write(phy, PWR_ON, DPHY_PD_DPHY);
+
+	return 0;
+}
+
+static int mixel_dphy_power_on_lvds_phy(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	u32 locked;
+	int ret;
+
+	regmap_update_bits(priv->lvds_regmap, PHY_CTRL, LVDS_EN, LVDS_EN);
+
+	phy_write(phy, PWR_ON, DPHY_PD_DPHY);
+	phy_write(phy, PWR_ON, DPHY_PD_PLL);
+
+	/* do not wait for slave LVDS PHY being locked */
+	if (priv->is_slave)
+		return 0;
+
+	ret = regmap_read_poll_timeout(priv->regmap, DPHY_LOCK, locked,
+				       locked, PLL_LOCK_SLEEP,
+				       PLL_LOCK_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&phy->dev, "Could not get LVDS PHY lock (%d)!\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mixel_dphy_power_on(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(priv->phy_ref_clk);
+	if (ret < 0)
+		return ret;
+
+	if (phy->attrs.mode == PHY_MODE_MIPI_DPHY) {
+		ret = mixel_dphy_power_on_mipi_dphy(phy);
+	} else if (phy->attrs.mode == PHY_MODE_LVDS) {
+		ret = mixel_dphy_power_on_lvds_phy(phy);
+	} else {
+		dev_err(&phy->dev,
+			"Failed to power on PHY with invalid PHY mode: %d\n",
+							phy->attrs.mode);
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		goto clock_disable;
+
+	return 0;
+clock_disable:
+	clk_disable_unprepare(priv->phy_ref_clk);
+	return ret;
+}
+
+static int mixel_dphy_power_off(struct phy *phy)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+	phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+	phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+	if (phy->attrs.mode == PHY_MODE_LVDS)
+		regmap_update_bits(priv->lvds_regmap, PHY_CTRL, LVDS_EN, 0);
+
+	clk_disable_unprepare(priv->phy_ref_clk);
+
+	return 0;
+}
+
+static int mixel_dphy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+	int ret;
+
+	if (priv->devdata->is_combo && mode != PHY_MODE_LVDS) {
+		dev_err(&phy->dev, "Failed to set PHY mode for combo PHY\n");
+		return -EINVAL;
+	}
+
+	if (!priv->devdata->is_combo && mode != PHY_MODE_MIPI_DPHY) {
+		dev_err(&phy->dev, "Failed to set PHY mode to MIPI DPHY\n");
+		return -EINVAL;
+	}
+
+	if (priv->devdata->is_combo) {
+		u32 rsc = priv->id ? IMX_SC_R_MIPI_1 : IMX_SC_R_MIPI_0;
+
+		ret = imx_sc_misc_set_control(priv->ipc_handle,
+					      rsc, IMX_SC_C_MODE,
+					      mode == PHY_MODE_LVDS);
+		if (ret) {
+			dev_err(&phy->dev,
+				"Failed to set PHY mode via SCU ipc: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct phy_ops mixel_dphy_phy_ops = {
+	.init = mixel_dphy_init,
+	.exit = mixel_dphy_exit,
+	.power_on = mixel_dphy_power_on,
+	.power_off = mixel_dphy_power_off,
+	.set_mode = mixel_dphy_set_mode,
+	.configure = mixel_dphy_configure,
+	.validate = mixel_dphy_validate,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id mixel_dphy_of_match[] = {
+	{ .compatible = "fsl,imx8mq-mipi-dphy",
+	  .data = &mixel_dphy_devdata[MIXEL_IMX8MQ] },
+	{ .compatible = "fsl,imx8qxp-mipi-dphy",
+	  .data = &mixel_dphy_devdata[MIXEL_IMX8QXP] },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mixel_dphy_of_match);
+
+static int mixel_dphy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct mixel_dphy_priv *priv;
+	struct phy *phy;
+	void __iomem *base;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->devdata = of_device_get_match_data(&pdev->dev);
+	if (!priv->devdata)
+		return -EINVAL;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     &mixel_dphy_regmap_config);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(dev, "Couldn't create the DPHY regmap\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	priv->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref");
+	if (IS_ERR(priv->phy_ref_clk)) {
+		dev_err(dev, "No phy_ref clock found\n");
+		return PTR_ERR(priv->phy_ref_clk);
+	}
+	dev_dbg(dev, "phy_ref clock rate: %lu\n",
+		clk_get_rate(priv->phy_ref_clk));
+
+	if (priv->devdata->is_combo) {
+		priv->lvds_regmap =
+			syscon_regmap_lookup_by_phandle(np, "fsl,syscon");
+		if (IS_ERR(priv->lvds_regmap)) {
+			ret = PTR_ERR(priv->lvds_regmap);
+			dev_err_probe(dev, ret, "Failed to get LVDS regmap\n");
+			return ret;
+		}
+
+		priv->id = of_alias_get_id(np, "mipi_dphy");
+		if (priv->id < 0) {
+			dev_err(dev, "Failed to get phy node alias id: %d\n",
+				priv->id);
+			return priv->id;
+		}
+
+		ret = imx_scu_get_handle(&priv->ipc_handle);
+		if (ret) {
+			dev_err_probe(dev, ret,
+				      "Failed to get SCU ipc handle\n");
+			return ret;
+		}
+	}
+
+	dev_set_drvdata(dev, priv);
+
+	phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy));
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, priv);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver mixel_dphy_driver = {
+	.probe	= mixel_dphy_probe,
+	.driver = {
+		.name = "mixel-mipi-dphy",
+		.of_match_table	= mixel_dphy_of_match,
+	}
+};
+module_platform_driver(mixel_dphy_driver);
+
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_DESCRIPTION("Mixel MIPI-DSI PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
new file mode 100644
index 000000000..c93286483
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#define IMX8MM_PCIE_PHY_CMN_REG061	0x184
+#define  ANA_PLL_CLK_OUT_TO_EXT_IO_EN	BIT(0)
+#define IMX8MM_PCIE_PHY_CMN_REG062	0x188
+#define  ANA_PLL_CLK_OUT_TO_EXT_IO_SEL	BIT(3)
+#define IMX8MM_PCIE_PHY_CMN_REG063	0x18C
+#define  AUX_PLL_REFCLK_SEL_SYS_PLL	GENMASK(7, 6)
+#define IMX8MM_PCIE_PHY_CMN_REG064	0x190
+#define  ANA_AUX_RX_TX_SEL_TX		BIT(7)
+#define  ANA_AUX_RX_TERM_GND_EN		BIT(3)
+#define  ANA_AUX_TX_TERM		BIT(2)
+#define IMX8MM_PCIE_PHY_CMN_REG065	0x194
+#define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
+#define  ANA_AUX_TX_LVL			GENMASK(3, 0)
+#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
+#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
+#define PCIE_PHY_TRSV_REG5		0x414
+#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
+#define PCIE_PHY_TRSV_REG6		0x418
+#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
+
+#define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
+#define IMX8MM_GPR_PCIE_REF_CLK_PLL	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
+#define IMX8MM_GPR_PCIE_REF_CLK_EXT	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x2)
+#define IMX8MM_GPR_PCIE_AUX_EN		BIT(19)
+#define IMX8MM_GPR_PCIE_CMN_RST		BIT(18)
+#define IMX8MM_GPR_PCIE_POWER_OFF	BIT(17)
+#define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
+#define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
+
+struct imx8_pcie_phy {
+	void __iomem		*base;
+	struct clk		*clk;
+	struct phy		*phy;
+	struct regmap		*iomuxc_gpr;
+	struct reset_control	*reset;
+	u32			refclk_pad_mode;
+	u32			tx_deemph_gen1;
+	u32			tx_deemph_gen2;
+	bool			clkreq_unused;
+};
+
+static int imx8_pcie_phy_power_on(struct phy *phy)
+{
+	int ret;
+	u32 val, pad_mode;
+	struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
+
+	reset_control_assert(imx8_phy->reset);
+
+	pad_mode = imx8_phy->refclk_pad_mode;
+	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+			   imx8_phy->clkreq_unused ?
+			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN,
+			   IMX8MM_GPR_PCIE_AUX_EN);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_SSC_EN, 0);
+
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
+			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
+			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
+	usleep_range(100, 200);
+
+	/* Do the PHY common block reset */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_CMN_RST,
+			   IMX8MM_GPR_PCIE_CMN_RST);
+	usleep_range(200, 500);
+
+	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
+	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
+		/* Configure the pad as input */
+		val = readl(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
+		writel(val & ~ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
+	} else {
+		/* Configure the PHY to output the refclock via pad */
+		writel(ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
+	}
+
+	if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT ||
+	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
+		/* Source clock from SoC internal PLL */
+		writel(ANA_PLL_CLK_OUT_TO_EXT_IO_SEL,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG062);
+		writel(AUX_PLL_REFCLK_SEL_SYS_PLL,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063);
+		val = ANA_AUX_RX_TX_SEL_TX | ANA_AUX_TX_TERM;
+		writel(val | ANA_AUX_RX_TERM_GND_EN,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG064);
+		writel(ANA_AUX_RX_TERM | ANA_AUX_TX_LVL,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
+	}
+
+	/* Tune PHY de-emphasis setting to pass PCIe compliance. */
+	if (imx8_phy->tx_deemph_gen1)
+		writel(imx8_phy->tx_deemph_gen1,
+		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
+	if (imx8_phy->tx_deemph_gen2)
+		writel(imx8_phy->tx_deemph_gen2,
+		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+
+	reset_control_deassert(imx8_phy->reset);
+
+	/* Polling to check the phy is ready or not. */
+	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
+				 val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
+				 10, 20000);
+	return ret;
+}
+
+static int imx8_pcie_phy_init(struct phy *phy)
+{
+	struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
+
+	return clk_prepare_enable(imx8_phy->clk);
+}
+
+static int imx8_pcie_phy_exit(struct phy *phy)
+{
+	struct imx8_pcie_phy *imx8_phy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(imx8_phy->clk);
+
+	return 0;
+}
+
+static const struct phy_ops imx8_pcie_phy_ops = {
+	.init		= imx8_pcie_phy_init,
+	.exit		= imx8_pcie_phy_exit,
+	.power_on	= imx8_pcie_phy_power_on,
+	.owner		= THIS_MODULE,
+};
+
+static int imx8_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct imx8_pcie_phy *imx8_phy;
+	struct resource *res;
+
+	imx8_phy = devm_kzalloc(dev, sizeof(*imx8_phy), GFP_KERNEL);
+	if (!imx8_phy)
+		return -ENOMEM;
+
+	/* get PHY refclk pad mode */
+	of_property_read_u32(np, "fsl,refclk-pad-mode",
+			     &imx8_phy->refclk_pad_mode);
+
+	if (of_property_read_u32(np, "fsl,tx-deemph-gen1",
+				 &imx8_phy->tx_deemph_gen1))
+		imx8_phy->tx_deemph_gen1 = 0;
+
+	if (of_property_read_u32(np, "fsl,tx-deemph-gen2",
+				 &imx8_phy->tx_deemph_gen2))
+		imx8_phy->tx_deemph_gen2 = 0;
+
+	if (of_property_read_bool(np, "fsl,clkreq-unsupported"))
+		imx8_phy->clkreq_unused = true;
+	else
+		imx8_phy->clkreq_unused = false;
+
+	imx8_phy->clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(imx8_phy->clk)) {
+		dev_err(dev, "failed to get imx pcie phy clock\n");
+		return PTR_ERR(imx8_phy->clk);
+	}
+
+	/* Grab GPR config register range */
+	imx8_phy->iomuxc_gpr =
+		 syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (IS_ERR(imx8_phy->iomuxc_gpr)) {
+		dev_err(dev, "unable to find iomuxc registers\n");
+		return PTR_ERR(imx8_phy->iomuxc_gpr);
+	}
+
+	imx8_phy->reset = devm_reset_control_get_exclusive(dev, "pciephy");
+	if (IS_ERR(imx8_phy->reset)) {
+		dev_err(dev, "Failed to get PCIEPHY reset control\n");
+		return PTR_ERR(imx8_phy->reset);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	imx8_phy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(imx8_phy->base))
+		return PTR_ERR(imx8_phy->base);
+
+	imx8_phy->phy = devm_phy_create(dev, NULL, &imx8_pcie_phy_ops);
+	if (IS_ERR(imx8_phy->phy))
+		return PTR_ERR(imx8_phy->phy);
+
+	phy_set_drvdata(imx8_phy->phy, imx8_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+	{.compatible = "fsl,imx8mm-pcie-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
+static struct platform_driver imx8_pcie_phy_driver = {
+	.probe	= imx8_pcie_phy_probe,
+	.driver = {
+		.name	= "imx8-pcie-phy",
+		.of_match_table	= imx8_pcie_phy_of_match,
+	}
+};
+module_platform_driver(imx8_pcie_phy_driver);
+
+MODULE_DESCRIPTION("FSL IMX8 PCIE PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
new file mode 100644
index 000000000..a29b4a6f7
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -0,0 +1,200 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2017 NXP. */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define PHY_CTRL0			0x0
+#define PHY_CTRL0_REF_SSP_EN		BIT(2)
+#define PHY_CTRL0_FSEL_MASK		GENMASK(10, 5)
+#define PHY_CTRL0_FSEL_24M		0x2a
+
+#define PHY_CTRL1			0x4
+#define PHY_CTRL1_RESET			BIT(0)
+#define PHY_CTRL1_COMMONONN		BIT(1)
+#define PHY_CTRL1_ATERESET		BIT(3)
+#define PHY_CTRL1_VDATSRCENB0		BIT(19)
+#define PHY_CTRL1_VDATDETENB0		BIT(20)
+
+#define PHY_CTRL2			0x8
+#define PHY_CTRL2_TXENABLEN0		BIT(8)
+#define PHY_CTRL2_OTG_DISABLE		BIT(9)
+
+#define PHY_CTRL6			0x18
+#define PHY_CTRL6_ALT_CLK_EN		BIT(1)
+#define PHY_CTRL6_ALT_CLK_SEL		BIT(0)
+
+struct imx8mq_usb_phy {
+	struct phy *phy;
+	struct clk *clk;
+	void __iomem *base;
+	struct regulator *vbus;
+};
+
+static int imx8mq_usb_phy_init(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	u32 value;
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 |
+		   PHY_CTRL1_COMMONONN);
+	value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value |= PHY_CTRL0_REF_SSP_EN;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	value = readl(imx_phy->base + PHY_CTRL2);
+	value |= PHY_CTRL2_TXENABLEN0;
+	writel(value, imx_phy->base + PHY_CTRL2);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	return 0;
+}
+
+static int imx8mp_usb_phy_init(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	u32 value;
+
+	/* USB3.0 PHY signal fsel for 24M ref */
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value &= ~PHY_CTRL0_FSEL_MASK;
+	value |= FIELD_PREP(PHY_CTRL0_FSEL_MASK, PHY_CTRL0_FSEL_24M);
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	/* Disable alt_clk_en and use internal MPLL clocks */
+	value = readl(imx_phy->base + PHY_CTRL6);
+	value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN);
+	writel(value, imx_phy->base + PHY_CTRL6);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0);
+	value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	value = readl(imx_phy->base + PHY_CTRL0);
+	value |= PHY_CTRL0_REF_SSP_EN;
+	writel(value, imx_phy->base + PHY_CTRL0);
+
+	value = readl(imx_phy->base + PHY_CTRL2);
+	value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE;
+	writel(value, imx_phy->base + PHY_CTRL2);
+
+	udelay(10);
+
+	value = readl(imx_phy->base + PHY_CTRL1);
+	value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+	writel(value, imx_phy->base + PHY_CTRL1);
+
+	return 0;
+}
+
+static int imx8mq_phy_power_on(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regulator_enable(imx_phy->vbus);
+	if (ret)
+		return ret;
+
+	return clk_prepare_enable(imx_phy->clk);
+}
+
+static int imx8mq_phy_power_off(struct phy *phy)
+{
+	struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(imx_phy->clk);
+	regulator_disable(imx_phy->vbus);
+
+	return 0;
+}
+
+static const struct phy_ops imx8mq_usb_phy_ops = {
+	.init		= imx8mq_usb_phy_init,
+	.power_on	= imx8mq_phy_power_on,
+	.power_off	= imx8mq_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct phy_ops imx8mp_usb_phy_ops = {
+	.init		= imx8mp_usb_phy_init,
+	.power_on	= imx8mq_phy_power_on,
+	.power_off	= imx8mq_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id imx8mq_usb_phy_of_match[] = {
+	{.compatible = "fsl,imx8mq-usb-phy",
+	 .data = &imx8mq_usb_phy_ops,},
+	{.compatible = "fsl,imx8mp-usb-phy",
+	 .data = &imx8mp_usb_phy_ops,},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
+
+static int imx8mq_usb_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct imx8mq_usb_phy *imx_phy;
+	const struct phy_ops *phy_ops;
+
+	imx_phy = devm_kzalloc(dev, sizeof(*imx_phy), GFP_KERNEL);
+	if (!imx_phy)
+		return -ENOMEM;
+
+	imx_phy->clk = devm_clk_get(dev, "phy");
+	if (IS_ERR(imx_phy->clk)) {
+		dev_err(dev, "failed to get imx8mq usb phy clock\n");
+		return PTR_ERR(imx_phy->clk);
+	}
+
+	imx_phy->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(imx_phy->base))
+		return PTR_ERR(imx_phy->base);
+
+	phy_ops = of_device_get_match_data(dev);
+	if (!phy_ops)
+		return -EINVAL;
+
+	imx_phy->phy = devm_phy_create(dev, NULL, phy_ops);
+	if (IS_ERR(imx_phy->phy))
+		return PTR_ERR(imx_phy->phy);
+
+	imx_phy->vbus = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(imx_phy->vbus))
+		return PTR_ERR(imx_phy->vbus);
+
+	phy_set_drvdata(imx_phy->phy, imx_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver imx8mq_usb_phy_driver = {
+	.probe	= imx8mq_usb_phy_probe,
+	.driver = {
+		.name	= "imx8mq-usb-phy",
+		.of_match_table	= imx8mq_usb_phy_of_match,
+	}
+};
+module_platform_driver(imx8mq_usb_phy_driver);
+
+MODULE_DESCRIPTION("FSL IMX8MQ USB PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
new file mode 100644
index 000000000..e514b64bf
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8qm-lvds-phy.c
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017-2020,2022 NXP
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/units.h>
+
+#define REG_SET		0x4
+#define REG_CLR		0x8
+
+#define PHY_CTRL	0x0
+#define  M_MASK		GENMASK(18, 17)
+#define  M(n)		FIELD_PREP(M_MASK, (n))
+#define  CCM_MASK	GENMASK(16, 14)
+#define  CCM(n)		FIELD_PREP(CCM_MASK, (n))
+#define  CA_MASK	GENMASK(13, 11)
+#define  CA(n)		FIELD_PREP(CA_MASK, (n))
+#define  TST_MASK	GENMASK(10, 5)
+#define  TST(n)		FIELD_PREP(TST_MASK, (n))
+#define  CH_EN(id)	BIT(3 + (id))
+#define  NB		BIT(2)
+#define  RFB		BIT(1)
+#define  PD		BIT(0)
+
+/* Power On Reset(POR) value */
+#define  CTRL_RESET_VAL	(M(0x0) | CCM(0x4) | CA(0x4) | TST(0x25))
+
+/* PHY initialization value and mask */
+#define  CTRL_INIT_MASK	(M_MASK | CCM_MASK | CA_MASK | TST_MASK | NB | RFB)
+#define  CTRL_INIT_VAL	(M(0x0) | CCM(0x5) | CA(0x4) | TST(0x25) | RFB)
+
+#define PHY_STATUS	0x10
+#define  LOCK		BIT(0)
+
+#define PHY_NUM		2
+
+#define MIN_CLKIN_FREQ	(25 * MEGA)
+#define MAX_CLKIN_FREQ	(165 * MEGA)
+
+#define PLL_LOCK_SLEEP		10
+#define PLL_LOCK_TIMEOUT	1000
+
+struct mixel_lvds_phy {
+	struct phy *phy;
+	struct phy_configure_opts_lvds cfg;
+	unsigned int id;
+};
+
+struct mixel_lvds_phy_priv {
+	struct regmap *regmap;
+	struct mutex lock;	/* protect remap access and cfg of our own */
+	struct clk *phy_ref_clk;
+	struct mixel_lvds_phy *phys[PHY_NUM];
+};
+
+static int mixel_lvds_phy_init(struct phy *phy)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+	mutex_lock(&priv->lock);
+	regmap_update_bits(priv->regmap,
+			   PHY_CTRL, CTRL_INIT_MASK, CTRL_INIT_VAL);
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int mixel_lvds_phy_power_on(struct phy *phy)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+	struct mixel_lvds_phy *lvds_phy = phy_get_drvdata(phy);
+	struct mixel_lvds_phy *companion = priv->phys[lvds_phy->id ^ 1];
+	struct phy_configure_opts_lvds *cfg = &lvds_phy->cfg;
+	u32 val = 0;
+	u32 locked;
+	int ret;
+
+	/* The master PHY would power on the slave PHY. */
+	if (cfg->is_slave)
+		return 0;
+
+	ret = clk_prepare_enable(priv->phy_ref_clk);
+	if (ret < 0) {
+		dev_err(&phy->dev,
+			"failed to enable PHY reference clock: %d\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&priv->lock);
+	if (cfg->bits_per_lane_and_dclk_cycle == 7) {
+		if (cfg->differential_clk_rate < 44000000)
+			val |= M(0x2);
+		else if (cfg->differential_clk_rate < 90000000)
+			val |= M(0x1);
+		else
+			val |= M(0x0);
+	} else {
+		val = NB;
+
+		if (cfg->differential_clk_rate < 32000000)
+			val |= M(0x2);
+		else if (cfg->differential_clk_rate < 63000000)
+			val |= M(0x1);
+		else
+			val |= M(0x0);
+	}
+	regmap_update_bits(priv->regmap, PHY_CTRL, M_MASK | NB, val);
+
+	/*
+	 * Enable two channels synchronously,
+	 * if the companion PHY is a slave PHY.
+	 */
+	if (companion->cfg.is_slave)
+		val = CH_EN(0) | CH_EN(1);
+	else
+		val = CH_EN(lvds_phy->id);
+	regmap_write(priv->regmap, PHY_CTRL + REG_SET, val);
+
+	ret = regmap_read_poll_timeout(priv->regmap, PHY_STATUS, locked,
+				       locked, PLL_LOCK_SLEEP,
+				       PLL_LOCK_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&phy->dev, "failed to get PHY lock: %d\n", ret);
+		clk_disable_unprepare(priv->phy_ref_clk);
+	}
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int mixel_lvds_phy_power_off(struct phy *phy)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+	struct mixel_lvds_phy *lvds_phy = phy_get_drvdata(phy);
+	struct mixel_lvds_phy *companion = priv->phys[lvds_phy->id ^ 1];
+	struct phy_configure_opts_lvds *cfg = &lvds_phy->cfg;
+
+	/* The master PHY would power off the slave PHY. */
+	if (cfg->is_slave)
+		return 0;
+
+	mutex_lock(&priv->lock);
+	if (companion->cfg.is_slave)
+		regmap_write(priv->regmap, PHY_CTRL + REG_CLR,
+			     CH_EN(0) | CH_EN(1));
+	else
+		regmap_write(priv->regmap, PHY_CTRL + REG_CLR,
+			     CH_EN(lvds_phy->id));
+	mutex_unlock(&priv->lock);
+
+	clk_disable_unprepare(priv->phy_ref_clk);
+
+	return 0;
+}
+
+static int mixel_lvds_phy_configure(struct phy *phy,
+				    union phy_configure_opts *opts)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+	struct phy_configure_opts_lvds *cfg = &opts->lvds;
+	int ret;
+
+	ret = clk_set_rate(priv->phy_ref_clk, cfg->differential_clk_rate);
+	if (ret)
+		dev_err(&phy->dev, "failed to set PHY reference clock rate(%lu): %d\n",
+			cfg->differential_clk_rate, ret);
+
+	return ret;
+}
+
+/* Assume the master PHY's configuration set is cached first. */
+static int mixel_lvds_phy_check_slave(struct phy *slave_phy)
+{
+	struct device *dev = &slave_phy->dev;
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(dev->parent);
+	struct mixel_lvds_phy *slv = phy_get_drvdata(slave_phy);
+	struct mixel_lvds_phy *mst = priv->phys[slv->id ^ 1];
+	struct phy_configure_opts_lvds *mst_cfg = &mst->cfg;
+	struct phy_configure_opts_lvds *slv_cfg = &slv->cfg;
+
+	if (mst_cfg->bits_per_lane_and_dclk_cycle !=
+	    slv_cfg->bits_per_lane_and_dclk_cycle) {
+		dev_err(dev, "number bits mismatch(mst: %u vs slv: %u)\n",
+			mst_cfg->bits_per_lane_and_dclk_cycle,
+			slv_cfg->bits_per_lane_and_dclk_cycle);
+		return -EINVAL;
+	}
+
+	if (mst_cfg->differential_clk_rate !=
+	    slv_cfg->differential_clk_rate) {
+		dev_err(dev, "dclk rate mismatch(mst: %lu vs slv: %lu)\n",
+			mst_cfg->differential_clk_rate,
+			slv_cfg->differential_clk_rate);
+		return -EINVAL;
+	}
+
+	if (mst_cfg->lanes != slv_cfg->lanes) {
+		dev_err(dev, "lanes mismatch(mst: %u vs slv: %u)\n",
+			mst_cfg->lanes, slv_cfg->lanes);
+		return -EINVAL;
+	}
+
+	if (mst_cfg->is_slave == slv_cfg->is_slave) {
+		dev_err(dev, "master PHY is not found\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mixel_lvds_phy_validate(struct phy *phy, enum phy_mode mode,
+				   int submode, union phy_configure_opts *opts)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(phy->dev.parent);
+	struct mixel_lvds_phy *lvds_phy = phy_get_drvdata(phy);
+	struct phy_configure_opts_lvds *cfg = &opts->lvds;
+	int ret = 0;
+
+	if (mode != PHY_MODE_LVDS) {
+		dev_err(&phy->dev, "invalid PHY mode(%d)\n", mode);
+		return -EINVAL;
+	}
+
+	if (cfg->bits_per_lane_and_dclk_cycle != 7 &&
+	    cfg->bits_per_lane_and_dclk_cycle != 10) {
+		dev_err(&phy->dev, "invalid bits per data lane(%u)\n",
+			cfg->bits_per_lane_and_dclk_cycle);
+		return -EINVAL;
+	}
+
+	if (cfg->lanes != 4 && cfg->lanes != 3) {
+		dev_err(&phy->dev, "invalid data lanes(%u)\n", cfg->lanes);
+		return -EINVAL;
+	}
+
+	if (cfg->differential_clk_rate < MIN_CLKIN_FREQ ||
+	    cfg->differential_clk_rate > MAX_CLKIN_FREQ) {
+		dev_err(&phy->dev, "invalid differential clock rate(%lu)\n",
+			cfg->differential_clk_rate);
+		return -EINVAL;
+	}
+
+	mutex_lock(&priv->lock);
+	/* cache configuration set of our own for check */
+	memcpy(&lvds_phy->cfg, cfg, sizeof(*cfg));
+
+	if (cfg->is_slave) {
+		ret = mixel_lvds_phy_check_slave(phy);
+		if (ret)
+			dev_err(&phy->dev, "failed to check slave PHY: %d\n", ret);
+	}
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static const struct phy_ops mixel_lvds_phy_ops = {
+	.init = mixel_lvds_phy_init,
+	.power_on = mixel_lvds_phy_power_on,
+	.power_off = mixel_lvds_phy_power_off,
+	.configure = mixel_lvds_phy_configure,
+	.validate = mixel_lvds_phy_validate,
+	.owner = THIS_MODULE,
+};
+
+static int mixel_lvds_phy_reset(struct device *dev)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get PM runtime: %d\n", ret);
+		return ret;
+	}
+
+	regmap_write(priv->regmap, PHY_CTRL, CTRL_RESET_VAL);
+
+	ret = pm_runtime_put(dev);
+	if (ret < 0)
+		dev_err(dev, "failed to put PM runtime: %d\n", ret);
+
+	return ret;
+}
+
+static struct phy *mixel_lvds_phy_xlate(struct device *dev,
+					struct of_phandle_args *args)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(dev);
+	unsigned int phy_id;
+
+	if (args->args_count != 1) {
+		dev_err(dev,
+			"invalid argument number(%d) for 'phys' property\n",
+			args->args_count);
+		return ERR_PTR(-EINVAL);
+	}
+
+	phy_id = args->args[0];
+
+	if (phy_id >= PHY_NUM) {
+		dev_err(dev, "invalid PHY index(%d)\n", phy_id);
+		return ERR_PTR(-ENODEV);
+	}
+
+	return priv->phys[phy_id]->phy;
+}
+
+static int mixel_lvds_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct mixel_lvds_phy_priv *priv;
+	struct mixel_lvds_phy *lvds_phy;
+	struct phy *phy;
+	int i;
+	int ret;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = syscon_node_to_regmap(dev->of_node->parent);
+	if (IS_ERR(priv->regmap))
+		return dev_err_probe(dev, PTR_ERR(priv->regmap),
+				     "failed to get regmap\n");
+
+	priv->phy_ref_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->phy_ref_clk))
+		return dev_err_probe(dev, PTR_ERR(priv->phy_ref_clk),
+				     "failed to get PHY reference clock\n");
+
+	mutex_init(&priv->lock);
+
+	dev_set_drvdata(dev, priv);
+
+	pm_runtime_enable(dev);
+
+	ret = mixel_lvds_phy_reset(dev);
+	if (ret) {
+		dev_err(dev, "failed to do POR reset: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < PHY_NUM; i++) {
+		lvds_phy = devm_kzalloc(dev, sizeof(*lvds_phy), GFP_KERNEL);
+		if (!lvds_phy) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		phy = devm_phy_create(dev, NULL, &mixel_lvds_phy_ops);
+		if (IS_ERR(phy)) {
+			ret = PTR_ERR(phy);
+			dev_err(dev, "failed to create PHY for channel%d: %d\n",
+				i, ret);
+			goto err;
+		}
+
+		lvds_phy->phy = phy;
+		lvds_phy->id = i;
+		priv->phys[i] = lvds_phy;
+
+		phy_set_drvdata(phy, lvds_phy);
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, mixel_lvds_phy_xlate);
+	if (IS_ERR(phy_provider)) {
+		ret = PTR_ERR(phy_provider);
+		dev_err(dev, "failed to register PHY provider: %d\n", ret);
+		goto err;
+	}
+
+	return 0;
+err:
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int mixel_lvds_phy_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused mixel_lvds_phy_runtime_suspend(struct device *dev)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(dev);
+
+	/* power down */
+	mutex_lock(&priv->lock);
+	regmap_write(priv->regmap, PHY_CTRL + REG_SET, PD);
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static int __maybe_unused mixel_lvds_phy_runtime_resume(struct device *dev)
+{
+	struct mixel_lvds_phy_priv *priv = dev_get_drvdata(dev);
+
+	/* power up + control initialization */
+	mutex_lock(&priv->lock);
+	regmap_update_bits(priv->regmap, PHY_CTRL,
+			   CTRL_INIT_MASK | PD, CTRL_INIT_VAL);
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mixel_lvds_phy_pm_ops = {
+	SET_RUNTIME_PM_OPS(mixel_lvds_phy_runtime_suspend,
+			   mixel_lvds_phy_runtime_resume, NULL)
+};
+
+static const struct of_device_id mixel_lvds_phy_of_match[] = {
+	{ .compatible = "fsl,imx8qm-lvds-phy" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mixel_lvds_phy_of_match);
+
+static struct platform_driver mixel_lvds_phy_driver = {
+	.probe	= mixel_lvds_phy_probe,
+	.remove	= mixel_lvds_phy_remove,
+	.driver = {
+		.pm = &mixel_lvds_phy_pm_ops,
+		.name = "mixel-lvds-phy",
+		.of_match_table	= mixel_lvds_phy_of_match,
+	}
+};
+module_platform_driver(mixel_lvds_phy_driver);
+
+MODULE_DESCRIPTION("Mixel LVDS PHY driver");
+MODULE_AUTHOR("Liu Ying <victor.liu@nxp.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/freescale/phy-fsl-lynx-28g.c b/drivers/phy/freescale/phy-fsl-lynx-28g.c
new file mode 100644
index 000000000..0a8b40edc
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-lynx-28g.c
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (c) 2021-2022 NXP. */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#define LYNX_28G_NUM_LANE			8
+#define LYNX_28G_NUM_PLL			2
+
+/* General registers per SerDes block */
+#define LYNX_28G_PCC8				0x10a0
+#define LYNX_28G_PCC8_SGMII			0x1
+#define LYNX_28G_PCC8_SGMII_DIS			0x0
+
+#define LYNX_28G_PCCC				0x10b0
+#define LYNX_28G_PCCC_10GBASER			0x9
+#define LYNX_28G_PCCC_USXGMII			0x1
+#define LYNX_28G_PCCC_SXGMII_DIS		0x0
+
+#define LYNX_28G_LNa_PCC_OFFSET(lane)		(4 * (LYNX_28G_NUM_LANE - (lane->id) - 1))
+
+/* Per PLL registers */
+#define LYNX_28G_PLLnRSTCTL(pll)		(0x400 + (pll) * 0x100 + 0x0)
+#define LYNX_28G_PLLnRSTCTL_DIS(rstctl)		(((rstctl) & BIT(24)) >> 24)
+#define LYNX_28G_PLLnRSTCTL_LOCK(rstctl)	(((rstctl) & BIT(23)) >> 23)
+
+#define LYNX_28G_PLLnCR0(pll)			(0x400 + (pll) * 0x100 + 0x4)
+#define LYNX_28G_PLLnCR0_REFCLK_SEL(cr0)	(((cr0) & GENMASK(20, 16)))
+#define LYNX_28G_PLLnCR0_REFCLK_SEL_100MHZ	0x0
+#define LYNX_28G_PLLnCR0_REFCLK_SEL_125MHZ	0x10000
+#define LYNX_28G_PLLnCR0_REFCLK_SEL_156MHZ	0x20000
+#define LYNX_28G_PLLnCR0_REFCLK_SEL_150MHZ	0x30000
+#define LYNX_28G_PLLnCR0_REFCLK_SEL_161MHZ	0x40000
+
+#define LYNX_28G_PLLnCR1(pll)			(0x400 + (pll) * 0x100 + 0x8)
+#define LYNX_28G_PLLnCR1_FRATE_SEL(cr1)		(((cr1) & GENMASK(28, 24)))
+#define LYNX_28G_PLLnCR1_FRATE_5G_10GVCO	0x0
+#define LYNX_28G_PLLnCR1_FRATE_5G_25GVCO	0x10000000
+#define LYNX_28G_PLLnCR1_FRATE_10G_20GVCO	0x6000000
+
+/* Per SerDes lane registers */
+/* Lane a General Control Register */
+#define LYNX_28G_LNaGCR0(lane)			(0x800 + (lane) * 0x100 + 0x0)
+#define LYNX_28G_LNaGCR0_PROTO_SEL_MSK		GENMASK(7, 3)
+#define LYNX_28G_LNaGCR0_PROTO_SEL_SGMII	0x8
+#define LYNX_28G_LNaGCR0_PROTO_SEL_XFI		0x50
+#define LYNX_28G_LNaGCR0_IF_WIDTH_MSK		GENMASK(2, 0)
+#define LYNX_28G_LNaGCR0_IF_WIDTH_10_BIT	0x0
+#define LYNX_28G_LNaGCR0_IF_WIDTH_20_BIT	0x2
+
+/* Lane a Tx Reset Control Register */
+#define LYNX_28G_LNaTRSTCTL(lane)		(0x800 + (lane) * 0x100 + 0x20)
+#define LYNX_28G_LNaTRSTCTL_HLT_REQ		BIT(27)
+#define LYNX_28G_LNaTRSTCTL_RST_DONE		BIT(30)
+#define LYNX_28G_LNaTRSTCTL_RST_REQ		BIT(31)
+
+/* Lane a Tx General Control Register */
+#define LYNX_28G_LNaTGCR0(lane)			(0x800 + (lane) * 0x100 + 0x24)
+#define LYNX_28G_LNaTGCR0_USE_PLLF		0x0
+#define LYNX_28G_LNaTGCR0_USE_PLLS		BIT(28)
+#define LYNX_28G_LNaTGCR0_USE_PLL_MSK		BIT(28)
+#define LYNX_28G_LNaTGCR0_N_RATE_FULL		0x0
+#define LYNX_28G_LNaTGCR0_N_RATE_HALF		0x1000000
+#define LYNX_28G_LNaTGCR0_N_RATE_QUARTER	0x2000000
+#define LYNX_28G_LNaTGCR0_N_RATE_MSK		GENMASK(26, 24)
+
+#define LYNX_28G_LNaTECR0(lane)			(0x800 + (lane) * 0x100 + 0x30)
+
+/* Lane a Rx Reset Control Register */
+#define LYNX_28G_LNaRRSTCTL(lane)		(0x800 + (lane) * 0x100 + 0x40)
+#define LYNX_28G_LNaRRSTCTL_HLT_REQ		BIT(27)
+#define LYNX_28G_LNaRRSTCTL_RST_DONE		BIT(30)
+#define LYNX_28G_LNaRRSTCTL_RST_REQ		BIT(31)
+#define LYNX_28G_LNaRRSTCTL_CDR_LOCK		BIT(12)
+
+/* Lane a Rx General Control Register */
+#define LYNX_28G_LNaRGCR0(lane)			(0x800 + (lane) * 0x100 + 0x44)
+#define LYNX_28G_LNaRGCR0_USE_PLLF		0x0
+#define LYNX_28G_LNaRGCR0_USE_PLLS		BIT(28)
+#define LYNX_28G_LNaRGCR0_USE_PLL_MSK		BIT(28)
+#define LYNX_28G_LNaRGCR0_N_RATE_MSK		GENMASK(26, 24)
+#define LYNX_28G_LNaRGCR0_N_RATE_FULL		0x0
+#define LYNX_28G_LNaRGCR0_N_RATE_HALF		0x1000000
+#define LYNX_28G_LNaRGCR0_N_RATE_QUARTER	0x2000000
+#define LYNX_28G_LNaRGCR0_N_RATE_MSK		GENMASK(26, 24)
+
+#define LYNX_28G_LNaRGCR1(lane)			(0x800 + (lane) * 0x100 + 0x48)
+
+#define LYNX_28G_LNaRECR0(lane)			(0x800 + (lane) * 0x100 + 0x50)
+#define LYNX_28G_LNaRECR1(lane)			(0x800 + (lane) * 0x100 + 0x54)
+#define LYNX_28G_LNaRECR2(lane)			(0x800 + (lane) * 0x100 + 0x58)
+
+#define LYNX_28G_LNaRSCCR0(lane)		(0x800 + (lane) * 0x100 + 0x74)
+
+#define LYNX_28G_LNaPSS(lane)			(0x1000 + (lane) * 0x4)
+#define LYNX_28G_LNaPSS_TYPE(pss)		(((pss) & GENMASK(30, 24)) >> 24)
+#define LYNX_28G_LNaPSS_TYPE_SGMII		0x4
+#define LYNX_28G_LNaPSS_TYPE_XFI		0x28
+
+#define LYNX_28G_SGMIIaCR1(lane)		(0x1804 + (lane) * 0x10)
+#define LYNX_28G_SGMIIaCR1_SGPCS_EN		BIT(11)
+#define LYNX_28G_SGMIIaCR1_SGPCS_DIS		0x0
+#define LYNX_28G_SGMIIaCR1_SGPCS_MSK		BIT(11)
+
+struct lynx_28g_priv;
+
+struct lynx_28g_pll {
+	struct lynx_28g_priv *priv;
+	u32 rstctl, cr0, cr1;
+	int id;
+	DECLARE_PHY_INTERFACE_MASK(supported);
+};
+
+struct lynx_28g_lane {
+	struct lynx_28g_priv *priv;
+	struct phy *phy;
+	bool powered_up;
+	bool init;
+	unsigned int id;
+	phy_interface_t interface;
+};
+
+struct lynx_28g_priv {
+	void __iomem *base;
+	struct device *dev;
+	/* Serialize concurrent access to registers shared between lanes,
+	 * like PCCn
+	 */
+	spinlock_t pcc_lock;
+	struct lynx_28g_pll pll[LYNX_28G_NUM_PLL];
+	struct lynx_28g_lane lane[LYNX_28G_NUM_LANE];
+
+	struct delayed_work cdr_check;
+};
+
+static void lynx_28g_rmw(struct lynx_28g_priv *priv, unsigned long off,
+			 u32 val, u32 mask)
+{
+	void __iomem *reg = priv->base + off;
+	u32 orig, tmp;
+
+	orig = ioread32(reg);
+	tmp = orig & ~mask;
+	tmp |= val;
+	iowrite32(tmp, reg);
+}
+
+#define lynx_28g_lane_rmw(lane, reg, val, mask)	\
+	lynx_28g_rmw((lane)->priv, LYNX_28G_##reg(lane->id), \
+		     LYNX_28G_##reg##_##val, LYNX_28G_##reg##_##mask)
+#define lynx_28g_lane_read(lane, reg)			\
+	ioread32((lane)->priv->base + LYNX_28G_##reg((lane)->id))
+#define lynx_28g_pll_read(pll, reg)			\
+	ioread32((pll)->priv->base + LYNX_28G_##reg((pll)->id))
+
+static bool lynx_28g_supports_interface(struct lynx_28g_priv *priv, int intf)
+{
+	int i;
+
+	for (i = 0; i < LYNX_28G_NUM_PLL; i++) {
+		if (LYNX_28G_PLLnRSTCTL_DIS(priv->pll[i].rstctl))
+			continue;
+
+		if (test_bit(intf, priv->pll[i].supported))
+			return true;
+	}
+
+	return false;
+}
+
+static struct lynx_28g_pll *lynx_28g_pll_get(struct lynx_28g_priv *priv,
+					     phy_interface_t intf)
+{
+	struct lynx_28g_pll *pll;
+	int i;
+
+	for (i = 0; i < LYNX_28G_NUM_PLL; i++) {
+		pll = &priv->pll[i];
+
+		if (LYNX_28G_PLLnRSTCTL_DIS(pll->rstctl))
+			continue;
+
+		if (test_bit(intf, pll->supported))
+			return pll;
+	}
+
+	return NULL;
+}
+
+static void lynx_28g_lane_set_nrate(struct lynx_28g_lane *lane,
+				    struct lynx_28g_pll *pll,
+				    phy_interface_t intf)
+{
+	switch (LYNX_28G_PLLnCR1_FRATE_SEL(pll->cr1)) {
+	case LYNX_28G_PLLnCR1_FRATE_5G_10GVCO:
+	case LYNX_28G_PLLnCR1_FRATE_5G_25GVCO:
+		switch (intf) {
+		case PHY_INTERFACE_MODE_SGMII:
+		case PHY_INTERFACE_MODE_1000BASEX:
+			lynx_28g_lane_rmw(lane, LNaTGCR0, N_RATE_QUARTER, N_RATE_MSK);
+			lynx_28g_lane_rmw(lane, LNaRGCR0, N_RATE_QUARTER, N_RATE_MSK);
+			break;
+		default:
+			break;
+		}
+		break;
+	case LYNX_28G_PLLnCR1_FRATE_10G_20GVCO:
+		switch (intf) {
+		case PHY_INTERFACE_MODE_10GBASER:
+		case PHY_INTERFACE_MODE_USXGMII:
+			lynx_28g_lane_rmw(lane, LNaTGCR0, N_RATE_FULL, N_RATE_MSK);
+			lynx_28g_lane_rmw(lane, LNaRGCR0, N_RATE_FULL, N_RATE_MSK);
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void lynx_28g_lane_set_pll(struct lynx_28g_lane *lane,
+				  struct lynx_28g_pll *pll)
+{
+	if (pll->id == 0) {
+		lynx_28g_lane_rmw(lane, LNaTGCR0, USE_PLLF, USE_PLL_MSK);
+		lynx_28g_lane_rmw(lane, LNaRGCR0, USE_PLLF, USE_PLL_MSK);
+	} else {
+		lynx_28g_lane_rmw(lane, LNaTGCR0, USE_PLLS, USE_PLL_MSK);
+		lynx_28g_lane_rmw(lane, LNaRGCR0, USE_PLLS, USE_PLL_MSK);
+	}
+}
+
+static void lynx_28g_cleanup_lane(struct lynx_28g_lane *lane)
+{
+	u32 lane_offset = LYNX_28G_LNa_PCC_OFFSET(lane);
+	struct lynx_28g_priv *priv = lane->priv;
+
+	/* Cleanup the protocol configuration registers of the current protocol */
+	switch (lane->interface) {
+	case PHY_INTERFACE_MODE_10GBASER:
+		lynx_28g_rmw(priv, LYNX_28G_PCCC,
+			     LYNX_28G_PCCC_SXGMII_DIS << lane_offset,
+			     GENMASK(3, 0) << lane_offset);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+		lynx_28g_rmw(priv, LYNX_28G_PCC8,
+			     LYNX_28G_PCC8_SGMII_DIS << lane_offset,
+			     GENMASK(3, 0) << lane_offset);
+		break;
+	default:
+		break;
+	}
+}
+
+static void lynx_28g_lane_set_sgmii(struct lynx_28g_lane *lane)
+{
+	u32 lane_offset = LYNX_28G_LNa_PCC_OFFSET(lane);
+	struct lynx_28g_priv *priv = lane->priv;
+	struct lynx_28g_pll *pll;
+
+	lynx_28g_cleanup_lane(lane);
+
+	/* Setup the lane to run in SGMII */
+	lynx_28g_rmw(priv, LYNX_28G_PCC8,
+		     LYNX_28G_PCC8_SGMII << lane_offset,
+		     GENMASK(3, 0) << lane_offset);
+
+	/* Setup the protocol select and SerDes parallel interface width */
+	lynx_28g_lane_rmw(lane, LNaGCR0, PROTO_SEL_SGMII, PROTO_SEL_MSK);
+	lynx_28g_lane_rmw(lane, LNaGCR0, IF_WIDTH_10_BIT, IF_WIDTH_MSK);
+
+	/* Switch to the PLL that works with this interface type */
+	pll = lynx_28g_pll_get(priv, PHY_INTERFACE_MODE_SGMII);
+	lynx_28g_lane_set_pll(lane, pll);
+
+	/* Choose the portion of clock net to be used on this lane */
+	lynx_28g_lane_set_nrate(lane, pll, PHY_INTERFACE_MODE_SGMII);
+
+	/* Enable the SGMII PCS */
+	lynx_28g_lane_rmw(lane, SGMIIaCR1, SGPCS_EN, SGPCS_MSK);
+
+	/* Configure the appropriate equalization parameters for the protocol */
+	iowrite32(0x00808006, priv->base + LYNX_28G_LNaTECR0(lane->id));
+	iowrite32(0x04310000, priv->base + LYNX_28G_LNaRGCR1(lane->id));
+	iowrite32(0x9f800000, priv->base + LYNX_28G_LNaRECR0(lane->id));
+	iowrite32(0x001f0000, priv->base + LYNX_28G_LNaRECR1(lane->id));
+	iowrite32(0x00000000, priv->base + LYNX_28G_LNaRECR2(lane->id));
+	iowrite32(0x00000000, priv->base + LYNX_28G_LNaRSCCR0(lane->id));
+}
+
+static void lynx_28g_lane_set_10gbaser(struct lynx_28g_lane *lane)
+{
+	u32 lane_offset = LYNX_28G_LNa_PCC_OFFSET(lane);
+	struct lynx_28g_priv *priv = lane->priv;
+	struct lynx_28g_pll *pll;
+
+	lynx_28g_cleanup_lane(lane);
+
+	/* Enable the SXGMII lane */
+	lynx_28g_rmw(priv, LYNX_28G_PCCC,
+		     LYNX_28G_PCCC_10GBASER << lane_offset,
+		     GENMASK(3, 0) << lane_offset);
+
+	/* Setup the protocol select and SerDes parallel interface width */
+	lynx_28g_lane_rmw(lane, LNaGCR0, PROTO_SEL_XFI, PROTO_SEL_MSK);
+	lynx_28g_lane_rmw(lane, LNaGCR0, IF_WIDTH_20_BIT, IF_WIDTH_MSK);
+
+	/* Switch to the PLL that works with this interface type */
+	pll = lynx_28g_pll_get(priv, PHY_INTERFACE_MODE_10GBASER);
+	lynx_28g_lane_set_pll(lane, pll);
+
+	/* Choose the portion of clock net to be used on this lane */
+	lynx_28g_lane_set_nrate(lane, pll, PHY_INTERFACE_MODE_10GBASER);
+
+	/* Disable the SGMII PCS */
+	lynx_28g_lane_rmw(lane, SGMIIaCR1, SGPCS_DIS, SGPCS_MSK);
+
+	/* Configure the appropriate equalization parameters for the protocol */
+	iowrite32(0x10808307, priv->base + LYNX_28G_LNaTECR0(lane->id));
+	iowrite32(0x10000000, priv->base + LYNX_28G_LNaRGCR1(lane->id));
+	iowrite32(0x00000000, priv->base + LYNX_28G_LNaRECR0(lane->id));
+	iowrite32(0x001f0000, priv->base + LYNX_28G_LNaRECR1(lane->id));
+	iowrite32(0x81000020, priv->base + LYNX_28G_LNaRECR2(lane->id));
+	iowrite32(0x00002000, priv->base + LYNX_28G_LNaRSCCR0(lane->id));
+}
+
+static int lynx_28g_power_off(struct phy *phy)
+{
+	struct lynx_28g_lane *lane = phy_get_drvdata(phy);
+	u32 trstctl, rrstctl;
+
+	if (!lane->powered_up)
+		return 0;
+
+	/* Issue a halt request */
+	lynx_28g_lane_rmw(lane, LNaTRSTCTL, HLT_REQ, HLT_REQ);
+	lynx_28g_lane_rmw(lane, LNaRRSTCTL, HLT_REQ, HLT_REQ);
+
+	/* Wait until the halting process is complete */
+	do {
+		trstctl = lynx_28g_lane_read(lane, LNaTRSTCTL);
+		rrstctl = lynx_28g_lane_read(lane, LNaRRSTCTL);
+	} while ((trstctl & LYNX_28G_LNaTRSTCTL_HLT_REQ) ||
+		 (rrstctl & LYNX_28G_LNaRRSTCTL_HLT_REQ));
+
+	lane->powered_up = false;
+
+	return 0;
+}
+
+static int lynx_28g_power_on(struct phy *phy)
+{
+	struct lynx_28g_lane *lane = phy_get_drvdata(phy);
+	u32 trstctl, rrstctl;
+
+	if (lane->powered_up)
+		return 0;
+
+	/* Issue a reset request on the lane */
+	lynx_28g_lane_rmw(lane, LNaTRSTCTL, RST_REQ, RST_REQ);
+	lynx_28g_lane_rmw(lane, LNaRRSTCTL, RST_REQ, RST_REQ);
+
+	/* Wait until the reset sequence is completed */
+	do {
+		trstctl = lynx_28g_lane_read(lane, LNaTRSTCTL);
+		rrstctl = lynx_28g_lane_read(lane, LNaRRSTCTL);
+	} while (!(trstctl & LYNX_28G_LNaTRSTCTL_RST_DONE) ||
+		 !(rrstctl & LYNX_28G_LNaRRSTCTL_RST_DONE));
+
+	lane->powered_up = true;
+
+	return 0;
+}
+
+static int lynx_28g_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+	struct lynx_28g_lane *lane = phy_get_drvdata(phy);
+	struct lynx_28g_priv *priv = lane->priv;
+	int powered_up = lane->powered_up;
+	int err = 0;
+
+	if (mode != PHY_MODE_ETHERNET)
+		return -EOPNOTSUPP;
+
+	if (lane->interface == PHY_INTERFACE_MODE_NA)
+		return -EOPNOTSUPP;
+
+	if (!lynx_28g_supports_interface(priv, submode))
+		return -EOPNOTSUPP;
+
+	/* If the lane is powered up, put the lane into the halt state while
+	 * the reconfiguration is being done.
+	 */
+	if (powered_up)
+		lynx_28g_power_off(phy);
+
+	spin_lock(&priv->pcc_lock);
+
+	switch (submode) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+		lynx_28g_lane_set_sgmii(lane);
+		break;
+	case PHY_INTERFACE_MODE_10GBASER:
+		lynx_28g_lane_set_10gbaser(lane);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	lane->interface = submode;
+
+out:
+	spin_unlock(&priv->pcc_lock);
+
+	/* Power up the lane if necessary */
+	if (powered_up)
+		lynx_28g_power_on(phy);
+
+	return err;
+}
+
+static int lynx_28g_validate(struct phy *phy, enum phy_mode mode, int submode,
+			     union phy_configure_opts *opts __always_unused)
+{
+	struct lynx_28g_lane *lane = phy_get_drvdata(phy);
+	struct lynx_28g_priv *priv = lane->priv;
+
+	if (mode != PHY_MODE_ETHERNET)
+		return -EOPNOTSUPP;
+
+	if (!lynx_28g_supports_interface(priv, submode))
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
+static int lynx_28g_init(struct phy *phy)
+{
+	struct lynx_28g_lane *lane = phy_get_drvdata(phy);
+
+	/* Mark the fact that the lane was init */
+	lane->init = true;
+
+	/* SerDes lanes are powered on at boot time.  Any lane that is managed
+	 * by this driver will get powered down at init time aka at dpaa2-eth
+	 * probe time.
+	 */
+	lane->powered_up = true;
+	lynx_28g_power_off(phy);
+
+	return 0;
+}
+
+static const struct phy_ops lynx_28g_ops = {
+	.init		= lynx_28g_init,
+	.power_on	= lynx_28g_power_on,
+	.power_off	= lynx_28g_power_off,
+	.set_mode	= lynx_28g_set_mode,
+	.validate	= lynx_28g_validate,
+	.owner		= THIS_MODULE,
+};
+
+static void lynx_28g_pll_read_configuration(struct lynx_28g_priv *priv)
+{
+	struct lynx_28g_pll *pll;
+	int i;
+
+	for (i = 0; i < LYNX_28G_NUM_PLL; i++) {
+		pll = &priv->pll[i];
+		pll->priv = priv;
+		pll->id = i;
+
+		pll->rstctl = lynx_28g_pll_read(pll, PLLnRSTCTL);
+		pll->cr0 = lynx_28g_pll_read(pll, PLLnCR0);
+		pll->cr1 = lynx_28g_pll_read(pll, PLLnCR1);
+
+		if (LYNX_28G_PLLnRSTCTL_DIS(pll->rstctl))
+			continue;
+
+		switch (LYNX_28G_PLLnCR1_FRATE_SEL(pll->cr1)) {
+		case LYNX_28G_PLLnCR1_FRATE_5G_10GVCO:
+		case LYNX_28G_PLLnCR1_FRATE_5G_25GVCO:
+			/* 5GHz clock net */
+			__set_bit(PHY_INTERFACE_MODE_1000BASEX, pll->supported);
+			__set_bit(PHY_INTERFACE_MODE_SGMII, pll->supported);
+			break;
+		case LYNX_28G_PLLnCR1_FRATE_10G_20GVCO:
+			/* 10.3125GHz clock net */
+			__set_bit(PHY_INTERFACE_MODE_10GBASER, pll->supported);
+			break;
+		default:
+			/* 6GHz, 12.890625GHz, 8GHz */
+			break;
+		}
+	}
+}
+
+#define work_to_lynx(w) container_of((w), struct lynx_28g_priv, cdr_check.work)
+
+static void lynx_28g_cdr_lock_check(struct work_struct *work)
+{
+	struct lynx_28g_priv *priv = work_to_lynx(work);
+	struct lynx_28g_lane *lane;
+	u32 rrstctl;
+	int i;
+
+	for (i = 0; i < LYNX_28G_NUM_LANE; i++) {
+		lane = &priv->lane[i];
+
+		mutex_lock(&lane->phy->mutex);
+
+		if (!lane->init || !lane->powered_up) {
+			mutex_unlock(&lane->phy->mutex);
+			continue;
+		}
+
+		rrstctl = lynx_28g_lane_read(lane, LNaRRSTCTL);
+		if (!(rrstctl & LYNX_28G_LNaRRSTCTL_CDR_LOCK)) {
+			lynx_28g_lane_rmw(lane, LNaRRSTCTL, RST_REQ, RST_REQ);
+			do {
+				rrstctl = lynx_28g_lane_read(lane, LNaRRSTCTL);
+			} while (!(rrstctl & LYNX_28G_LNaRRSTCTL_RST_DONE));
+		}
+
+		mutex_unlock(&lane->phy->mutex);
+	}
+	queue_delayed_work(system_power_efficient_wq, &priv->cdr_check,
+			   msecs_to_jiffies(1000));
+}
+
+static void lynx_28g_lane_read_configuration(struct lynx_28g_lane *lane)
+{
+	u32 pss, protocol;
+
+	pss = lynx_28g_lane_read(lane, LNaPSS);
+	protocol = LYNX_28G_LNaPSS_TYPE(pss);
+	switch (protocol) {
+	case LYNX_28G_LNaPSS_TYPE_SGMII:
+		lane->interface = PHY_INTERFACE_MODE_SGMII;
+		break;
+	case LYNX_28G_LNaPSS_TYPE_XFI:
+		lane->interface = PHY_INTERFACE_MODE_10GBASER;
+		break;
+	default:
+		lane->interface = PHY_INTERFACE_MODE_NA;
+	}
+}
+
+static struct phy *lynx_28g_xlate(struct device *dev,
+				  struct of_phandle_args *args)
+{
+	struct lynx_28g_priv *priv = dev_get_drvdata(dev);
+	int idx = args->args[0];
+
+	if (WARN_ON(idx >= LYNX_28G_NUM_LANE))
+		return ERR_PTR(-EINVAL);
+
+	return priv->lane[idx].phy;
+}
+
+static int lynx_28g_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct lynx_28g_priv *priv;
+	int i;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = &pdev->dev;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	lynx_28g_pll_read_configuration(priv);
+
+	for (i = 0; i < LYNX_28G_NUM_LANE; i++) {
+		struct lynx_28g_lane *lane = &priv->lane[i];
+		struct phy *phy;
+
+		memset(lane, 0, sizeof(*lane));
+
+		phy = devm_phy_create(&pdev->dev, NULL, &lynx_28g_ops);
+		if (IS_ERR(phy))
+			return PTR_ERR(phy);
+
+		lane->priv = priv;
+		lane->phy = phy;
+		lane->id = i;
+		phy_set_drvdata(phy, lane);
+		lynx_28g_lane_read_configuration(lane);
+	}
+
+	dev_set_drvdata(dev, priv);
+
+	spin_lock_init(&priv->pcc_lock);
+	INIT_DELAYED_WORK(&priv->cdr_check, lynx_28g_cdr_lock_check);
+
+	queue_delayed_work(system_power_efficient_wq, &priv->cdr_check,
+			   msecs_to_jiffies(1000));
+
+	dev_set_drvdata(&pdev->dev, priv);
+	provider = devm_of_phy_provider_register(&pdev->dev, lynx_28g_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static void lynx_28g_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lynx_28g_priv *priv = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&priv->cdr_check);
+}
+
+static const struct of_device_id lynx_28g_of_match_table[] = {
+	{ .compatible = "fsl,lynx-28g" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lynx_28g_of_match_table);
+
+static struct platform_driver lynx_28g_driver = {
+	.probe	= lynx_28g_probe,
+	.remove_new = lynx_28g_remove,
+	.driver	= {
+		.name = "lynx-28g",
+		.of_match_table = lynx_28g_of_match_table,
+	},
+};
+module_platform_driver(lynx_28g_driver);
+
+MODULE_AUTHOR("Ioana Ciornei <ioana.ciornei@nxp.com>");
+MODULE_DESCRIPTION("Lynx 28G SerDes PHY driver for Layerscape SoCs");
+MODULE_LICENSE("GPL v2");