Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1971 insertions, 0 deletions

diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
new file mode 100644
index 000000000..47b2f8bb6
--- /dev/null
+++ b/drivers/platform/x86/asus-laptop.c
@@ -0,0 +1,1971 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  asus-laptop.c - Asus Laptop Support
+ *
+ *  Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
+ *  Copyright (C) 2006-2007 Corentin Chary
+ *  Copyright (C) 2011 Wind River Systems
+ *
+ *  The development page for this driver is located at
+ *  http://sourceforge.net/projects/acpi4asus/
+ *
+ *  Credits:
+ *  Pontus Fuchs   - Helper functions, cleanup
+ *  Johann Wiesner - Small compile fixes
+ *  John Belmonte  - ACPI code for Toshiba laptop was a good starting point.
+ *  Eric Burghard  - LED display support for W1N
+ *  Josh Green     - Light Sens support
+ *  Thomas Tuttle  - His first patch for led support was very helpful
+ *  Sam Lin        - GPS support
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/proc_fs.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/rfkill.h>
+#include <linux/slab.h>
+#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <acpi/video.h>
+
+#define ASUS_LAPTOP_VERSION	"0.42"
+
+#define ASUS_LAPTOP_NAME	"Asus Laptop Support"
+#define ASUS_LAPTOP_CLASS	"hotkey"
+#define ASUS_LAPTOP_DEVICE_NAME	"Hotkey"
+#define ASUS_LAPTOP_FILE	KBUILD_MODNAME
+#define ASUS_LAPTOP_PREFIX	"\\_SB.ATKD."
+
+MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary");
+MODULE_DESCRIPTION(ASUS_LAPTOP_NAME);
+MODULE_LICENSE("GPL");
+
+/*
+ * WAPF defines the behavior of the Fn+Fx wlan key
+ * The significance of values is yet to be found, but
+ * most of the time:
+ * Bit | Bluetooth | WLAN
+ *  0  | Hardware  | Hardware
+ *  1  | Hardware  | Software
+ *  4  | Software  | Software
+ */
+static uint wapf = 1;
+module_param(wapf, uint, 0444);
+MODULE_PARM_DESC(wapf, "WAPF value");
+
+static char *wled_type = "unknown";
+static char *bled_type = "unknown";
+
+module_param(wled_type, charp, 0444);
+MODULE_PARM_DESC(wled_type, "Set the wled type on boot "
+		 "(unknown, led or rfkill). "
+		 "default is unknown");
+
+module_param(bled_type, charp, 0444);
+MODULE_PARM_DESC(bled_type, "Set the bled type on boot "
+		 "(unknown, led or rfkill). "
+		 "default is unknown");
+
+static int wlan_status = 1;
+static int bluetooth_status = 1;
+static int wimax_status = -1;
+static int wwan_status = -1;
+static int als_status;
+
+module_param(wlan_status, int, 0444);
+MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is -1");
+
+module_param(bluetooth_status, int, 0444);
+MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is -1");
+
+module_param(wimax_status, int, 0444);
+MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is -1");
+
+module_param(wwan_status, int, 0444);
+MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is -1");
+
+module_param(als_status, int, 0444);
+MODULE_PARM_DESC(als_status, "Set the ALS status on boot "
+		 "(0 = disabled, 1 = enabled). "
+		 "default is 0");
+
+/*
+ * Some events we use, same for all Asus
+ */
+#define ATKD_BRNUP_MIN		0x10
+#define ATKD_BRNUP_MAX		0x1f
+#define ATKD_BRNDOWN_MIN	0x20
+#define ATKD_BRNDOWN_MAX	0x2f
+#define ATKD_BRNDOWN		0x20
+#define ATKD_BRNUP		0x2f
+#define ATKD_LCD_ON	0x33
+#define ATKD_LCD_OFF	0x34
+
+/*
+ * Known bits returned by \_SB.ATKD.HWRS
+ */
+#define WL_HWRS		0x80
+#define BT_HWRS		0x100
+
+/*
+ * Flags for hotk status
+ * WL_ON and BT_ON are also used for wireless_status()
+ */
+#define WL_RSTS		0x01	/* internal Wifi */
+#define BT_RSTS		0x02	/* internal Bluetooth */
+#define WM_RSTS		0x08    /* internal wimax */
+#define WW_RSTS		0x20    /* internal wwan */
+
+/* WLED and BLED type */
+#define TYPE_UNKNOWN	0
+#define TYPE_LED	1
+#define TYPE_RFKILL	2
+
+/* LED */
+#define METHOD_MLED		"MLED"
+#define METHOD_TLED		"TLED"
+#define METHOD_RLED		"RLED"	/* W1JC */
+#define METHOD_PLED		"PLED"	/* A7J */
+#define METHOD_GLED		"GLED"	/* G1, G2 (probably) */
+
+/* LEDD */
+#define METHOD_LEDD		"SLCM"
+
+/*
+ * Bluetooth and WLAN
+ * WLED and BLED are not handled like other XLED, because in some dsdt
+ * they also control the WLAN/Bluetooth device.
+ */
+#define METHOD_WLAN		"WLED"
+#define METHOD_BLUETOOTH	"BLED"
+
+/* WWAN and WIMAX */
+#define METHOD_WWAN		"GSMC"
+#define METHOD_WIMAX		"WMXC"
+
+#define METHOD_WL_STATUS	"RSTS"
+
+/* Brightness */
+#define METHOD_BRIGHTNESS_SET	"SPLV"
+#define METHOD_BRIGHTNESS_GET	"GPLV"
+
+/* Display */
+#define METHOD_SWITCH_DISPLAY	"SDSP"
+
+#define METHOD_ALS_CONTROL	"ALSC" /* Z71A Z71V */
+#define METHOD_ALS_LEVEL	"ALSL" /* Z71A Z71V */
+
+/* GPS */
+/* R2H use different handle for GPS on/off */
+#define METHOD_GPS_ON		"SDON"
+#define METHOD_GPS_OFF		"SDOF"
+#define METHOD_GPS_STATUS	"GPST"
+
+/* Keyboard light */
+#define METHOD_KBD_LIGHT_SET	"SLKB"
+#define METHOD_KBD_LIGHT_GET	"GLKB"
+
+/* For Pegatron Lucid tablet */
+#define DEVICE_NAME_PEGA	"Lucid"
+
+#define METHOD_PEGA_ENABLE	"ENPR"
+#define METHOD_PEGA_DISABLE	"DAPR"
+#define PEGA_WLAN	0x00
+#define PEGA_BLUETOOTH	0x01
+#define PEGA_WWAN	0x02
+#define PEGA_ALS	0x04
+#define PEGA_ALS_POWER	0x05
+
+#define METHOD_PEGA_READ	"RDLN"
+#define PEGA_READ_ALS_H	0x02
+#define PEGA_READ_ALS_L	0x03
+
+#define PEGA_ACCEL_NAME "pega_accel"
+#define PEGA_ACCEL_DESC "Pegatron Lucid Tablet Accelerometer"
+#define METHOD_XLRX "XLRX"
+#define METHOD_XLRY "XLRY"
+#define METHOD_XLRZ "XLRZ"
+#define PEGA_ACC_CLAMP 512 /* 1G accel is reported as ~256, so clamp to 2G */
+#define PEGA_ACC_RETRIES 3
+
+/*
+ * Define a specific led structure to keep the main structure clean
+ */
+struct asus_led {
+	int wk;
+	struct work_struct work;
+	struct led_classdev led;
+	struct asus_laptop *asus;
+	const char *method;
+};
+
+/*
+ * Same thing for rfkill
+ */
+struct asus_rfkill {
+	/* type of control. Maps to PEGA_* values or *_RSTS  */
+	int control_id;
+	struct rfkill *rfkill;
+	struct asus_laptop *asus;
+};
+
+/*
+ * This is the main structure, we can use it to store anything interesting
+ * about the hotk device
+ */
+struct asus_laptop {
+	char *name;		/* laptop name */
+
+	struct acpi_table_header *dsdt_info;
+	struct platform_device *platform_device;
+	struct acpi_device *device;		/* the device we are in */
+	struct backlight_device *backlight_device;
+
+	struct input_dev *inputdev;
+	struct key_entry *keymap;
+	struct input_dev *pega_accel_poll;
+
+	struct asus_led wled;
+	struct asus_led bled;
+	struct asus_led mled;
+	struct asus_led tled;
+	struct asus_led rled;
+	struct asus_led pled;
+	struct asus_led gled;
+	struct asus_led kled;
+	struct workqueue_struct *led_workqueue;
+
+	int wled_type;
+	int bled_type;
+	int wireless_status;
+	bool have_rsts;
+	bool is_pega_lucid;
+	bool pega_acc_live;
+	int pega_acc_x;
+	int pega_acc_y;
+	int pega_acc_z;
+
+	struct asus_rfkill wlan;
+	struct asus_rfkill bluetooth;
+	struct asus_rfkill wwan;
+	struct asus_rfkill wimax;
+	struct asus_rfkill gps;
+
+	acpi_handle handle;	/* the handle of the hotk device */
+	u32 ledd_status;	/* status of the LED display */
+	u8 light_level;		/* light sensor level */
+	u8 light_switch;	/* light sensor switch value */
+	u16 event_count[128];	/* count for each event TODO make this better */
+};
+
+static const struct key_entry asus_keymap[] = {
+	/* Lenovo SL Specific keycodes */
+	{KE_KEY, 0x02, { KEY_SCREENLOCK } },
+	{KE_KEY, 0x05, { KEY_WLAN } },
+	{KE_KEY, 0x08, { KEY_F13 } },
+	{KE_KEY, 0x09, { KEY_PROG2 } }, /* Dock */
+	{KE_KEY, 0x17, { KEY_ZOOM } },
+	{KE_KEY, 0x1f, { KEY_BATTERY } },
+	/* End of Lenovo SL Specific keycodes */
+	{KE_KEY, ATKD_BRNDOWN, { KEY_BRIGHTNESSDOWN } },
+	{KE_KEY, ATKD_BRNUP, { KEY_BRIGHTNESSUP } },
+	{KE_KEY, 0x30, { KEY_VOLUMEUP } },
+	{KE_KEY, 0x31, { KEY_VOLUMEDOWN } },
+	{KE_KEY, 0x32, { KEY_MUTE } },
+	{KE_KEY, 0x33, { KEY_DISPLAYTOGGLE } }, /* LCD on */
+	{KE_KEY, 0x34, { KEY_DISPLAY_OFF } }, /* LCD off */
+	{KE_KEY, 0x40, { KEY_PREVIOUSSONG } },
+	{KE_KEY, 0x41, { KEY_NEXTSONG } },
+	{KE_KEY, 0x43, { KEY_STOPCD } }, /* Stop/Eject */
+	{KE_KEY, 0x45, { KEY_PLAYPAUSE } },
+	{KE_KEY, 0x4c, { KEY_MEDIA } }, /* WMP Key */
+	{KE_KEY, 0x50, { KEY_EMAIL } },
+	{KE_KEY, 0x51, { KEY_WWW } },
+	{KE_KEY, 0x55, { KEY_CALC } },
+	{KE_IGNORE, 0x57, },  /* Battery mode */
+	{KE_IGNORE, 0x58, },  /* AC mode */
+	{KE_KEY, 0x5C, { KEY_SCREENLOCK } },  /* Screenlock */
+	{KE_KEY, 0x5D, { KEY_WLAN } }, /* WLAN Toggle */
+	{KE_KEY, 0x5E, { KEY_WLAN } }, /* WLAN Enable */
+	{KE_KEY, 0x5F, { KEY_WLAN } }, /* WLAN Disable */
+	{KE_KEY, 0x60, { KEY_TOUCHPAD_ON } },
+	{KE_KEY, 0x61, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD only */
+	{KE_KEY, 0x62, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT only */
+	{KE_KEY, 0x63, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT */
+	{KE_KEY, 0x64, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV */
+	{KE_KEY, 0x65, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV */
+	{KE_KEY, 0x66, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV */
+	{KE_KEY, 0x67, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV */
+	{KE_KEY, 0x6A, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad Fn + F9 */
+	{KE_KEY, 0x6B, { KEY_TOUCHPAD_TOGGLE } }, /* Lock Touchpad */
+	{KE_KEY, 0x6C, { KEY_SLEEP } }, /* Suspend */
+	{KE_KEY, 0x6D, { KEY_SLEEP } }, /* Hibernate */
+	{KE_IGNORE, 0x6E, },  /* Low Battery notification */
+	{KE_KEY, 0x7D, { KEY_BLUETOOTH } }, /* Bluetooth Enable */
+	{KE_KEY, 0x7E, { KEY_BLUETOOTH } }, /* Bluetooth Disable */
+	{KE_KEY, 0x82, { KEY_CAMERA } },
+	{KE_KEY, 0x88, { KEY_RFKILL  } }, /* Radio Toggle Key */
+	{KE_KEY, 0x8A, { KEY_PROG1 } }, /* Color enhancement mode */
+	{KE_KEY, 0x8C, { KEY_SWITCHVIDEOMODE } }, /* SDSP DVI only */
+	{KE_KEY, 0x8D, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + DVI */
+	{KE_KEY, 0x8E, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + DVI */
+	{KE_KEY, 0x8F, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV + DVI */
+	{KE_KEY, 0x90, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + DVI */
+	{KE_KEY, 0x91, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV + DVI */
+	{KE_KEY, 0x92, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV + DVI */
+	{KE_KEY, 0x93, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV + DVI */
+	{KE_KEY, 0x95, { KEY_MEDIA } },
+	{KE_KEY, 0x99, { KEY_PHONE } },
+	{KE_KEY, 0xA0, { KEY_SWITCHVIDEOMODE } }, /* SDSP HDMI only */
+	{KE_KEY, 0xA1, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + HDMI */
+	{KE_KEY, 0xA2, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + HDMI */
+	{KE_KEY, 0xA3, { KEY_SWITCHVIDEOMODE } }, /* SDSP TV + HDMI */
+	{KE_KEY, 0xA4, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + HDMI */
+	{KE_KEY, 0xA5, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + TV + HDMI */
+	{KE_KEY, 0xA6, { KEY_SWITCHVIDEOMODE } }, /* SDSP CRT + TV + HDMI */
+	{KE_KEY, 0xA7, { KEY_SWITCHVIDEOMODE } }, /* SDSP LCD + CRT + TV + HDMI */
+	{KE_KEY, 0xB5, { KEY_CALC } },
+	{KE_KEY, 0xC4, { KEY_KBDILLUMUP } },
+	{KE_KEY, 0xC5, { KEY_KBDILLUMDOWN } },
+	{KE_END, 0},
+};
+
+
+/*
+ * This function evaluates an ACPI method, given an int as parameter, the
+ * method is searched within the scope of the handle, can be NULL. The output
+ * of the method is written is output, which can also be NULL
+ *
+ * returns 0 if write is successful, -1 else.
+ */
+static int write_acpi_int_ret(acpi_handle handle, const char *method, int val,
+			      struct acpi_buffer *output)
+{
+	struct acpi_object_list params;	/* list of input parameters (an int) */
+	union acpi_object in_obj;	/* the only param we use */
+	acpi_status status;
+
+	if (!handle)
+		return -1;
+
+	params.count = 1;
+	params.pointer = &in_obj;
+	in_obj.type = ACPI_TYPE_INTEGER;
+	in_obj.integer.value = val;
+
+	status = acpi_evaluate_object(handle, (char *)method, &params, output);
+	if (status == AE_OK)
+		return 0;
+	else
+		return -1;
+}
+
+static int write_acpi_int(acpi_handle handle, const char *method, int val)
+{
+	return write_acpi_int_ret(handle, method, val, NULL);
+}
+
+static int acpi_check_handle(acpi_handle handle, const char *method,
+			     acpi_handle *ret)
+{
+	acpi_status status;
+
+	if (method == NULL)
+		return -ENODEV;
+
+	if (ret)
+		status = acpi_get_handle(handle, (char *)method,
+					 ret);
+	else {
+		acpi_handle dummy;
+
+		status = acpi_get_handle(handle, (char *)method,
+					 &dummy);
+	}
+
+	if (status != AE_OK) {
+		if (ret)
+			pr_warn("Error finding %s\n", method);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static bool asus_check_pega_lucid(struct asus_laptop *asus)
+{
+	return !strcmp(asus->name, DEVICE_NAME_PEGA) &&
+	   !acpi_check_handle(asus->handle, METHOD_PEGA_ENABLE, NULL) &&
+	   !acpi_check_handle(asus->handle, METHOD_PEGA_DISABLE, NULL) &&
+	   !acpi_check_handle(asus->handle, METHOD_PEGA_READ, NULL);
+}
+
+static int asus_pega_lucid_set(struct asus_laptop *asus, int unit, bool enable)
+{
+	char *method = enable ? METHOD_PEGA_ENABLE : METHOD_PEGA_DISABLE;
+	return write_acpi_int(asus->handle, method, unit);
+}
+
+static int pega_acc_axis(struct asus_laptop *asus, int curr, char *method)
+{
+	int i, delta;
+	unsigned long long val;
+	for (i = 0; i < PEGA_ACC_RETRIES; i++) {
+		acpi_evaluate_integer(asus->handle, method, NULL, &val);
+
+		/* The output is noisy.  From reading the ASL
+		 * dissassembly, timeout errors are returned with 1's
+		 * in the high word, and the lack of locking around
+		 * thei hi/lo byte reads means that a transition
+		 * between (for example) -1 and 0 could be read as
+		 * 0xff00 or 0x00ff. */
+		delta = abs(curr - (short)val);
+		if (delta < 128 && !(val & ~0xffff))
+			break;
+	}
+	return clamp_val((short)val, -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP);
+}
+
+static void pega_accel_poll(struct input_dev *input)
+{
+	struct device *parent = input->dev.parent;
+	struct asus_laptop *asus = dev_get_drvdata(parent);
+
+	/* In some cases, the very first call to poll causes a
+	 * recursive fault under the polldev worker.  This is
+	 * apparently related to very early userspace access to the
+	 * device, and perhaps a firmware bug. Fake the first report. */
+	if (!asus->pega_acc_live) {
+		asus->pega_acc_live = true;
+		input_report_abs(input, ABS_X, 0);
+		input_report_abs(input, ABS_Y, 0);
+		input_report_abs(input, ABS_Z, 0);
+		input_sync(input);
+		return;
+	}
+
+	asus->pega_acc_x = pega_acc_axis(asus, asus->pega_acc_x, METHOD_XLRX);
+	asus->pega_acc_y = pega_acc_axis(asus, asus->pega_acc_y, METHOD_XLRY);
+	asus->pega_acc_z = pega_acc_axis(asus, asus->pega_acc_z, METHOD_XLRZ);
+
+	/* Note transform, convert to "right/up/out" in the native
+	 * landscape orientation (i.e. the vector is the direction of
+	 * "real up" in the device's cartiesian coordinates). */
+	input_report_abs(input, ABS_X, -asus->pega_acc_x);
+	input_report_abs(input, ABS_Y, -asus->pega_acc_y);
+	input_report_abs(input, ABS_Z,  asus->pega_acc_z);
+	input_sync(input);
+}
+
+static void pega_accel_exit(struct asus_laptop *asus)
+{
+	if (asus->pega_accel_poll) {
+		input_unregister_device(asus->pega_accel_poll);
+		asus->pega_accel_poll = NULL;
+	}
+}
+
+static int pega_accel_init(struct asus_laptop *asus)
+{
+	int err;
+	struct input_dev *input;
+
+	if (!asus->is_pega_lucid)
+		return -ENODEV;
+
+	if (acpi_check_handle(asus->handle, METHOD_XLRX, NULL) ||
+	    acpi_check_handle(asus->handle, METHOD_XLRY, NULL) ||
+	    acpi_check_handle(asus->handle, METHOD_XLRZ, NULL))
+		return -ENODEV;
+
+	input = input_allocate_device();
+	if (!input)
+		return -ENOMEM;
+
+	input->name = PEGA_ACCEL_DESC;
+	input->phys = PEGA_ACCEL_NAME "/input0";
+	input->dev.parent = &asus->platform_device->dev;
+	input->id.bustype = BUS_HOST;
+
+	input_set_abs_params(input, ABS_X,
+			     -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0);
+	input_set_abs_params(input, ABS_Y,
+			     -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0);
+	input_set_abs_params(input, ABS_Z,
+			     -PEGA_ACC_CLAMP, PEGA_ACC_CLAMP, 0, 0);
+
+	err = input_setup_polling(input, pega_accel_poll);
+	if (err)
+		goto exit;
+
+	input_set_poll_interval(input, 125);
+	input_set_min_poll_interval(input, 50);
+	input_set_max_poll_interval(input, 2000);
+
+	err = input_register_device(input);
+	if (err)
+		goto exit;
+
+	asus->pega_accel_poll = input;
+	return 0;
+
+exit:
+	input_free_device(input);
+	return err;
+}
+
+/* Generic LED function */
+static int asus_led_set(struct asus_laptop *asus, const char *method,
+			 int value)
+{
+	if (!strcmp(method, METHOD_MLED))
+		value = !value;
+	else if (!strcmp(method, METHOD_GLED))
+		value = !value + 1;
+	else
+		value = !!value;
+
+	return write_acpi_int(asus->handle, method, value);
+}
+
+/*
+ * LEDs
+ */
+/* /sys/class/led handlers */
+static void asus_led_cdev_set(struct led_classdev *led_cdev,
+			 enum led_brightness value)
+{
+	struct asus_led *led = container_of(led_cdev, struct asus_led, led);
+	struct asus_laptop *asus = led->asus;
+
+	led->wk = !!value;
+	queue_work(asus->led_workqueue, &led->work);
+}
+
+static void asus_led_cdev_update(struct work_struct *work)
+{
+	struct asus_led *led = container_of(work, struct asus_led, work);
+	struct asus_laptop *asus = led->asus;
+
+	asus_led_set(asus, led->method, led->wk);
+}
+
+static enum led_brightness asus_led_cdev_get(struct led_classdev *led_cdev)
+{
+	return led_cdev->brightness;
+}
+
+/*
+ * Keyboard backlight (also a LED)
+ */
+static int asus_kled_lvl(struct asus_laptop *asus)
+{
+	unsigned long long kblv;
+	struct acpi_object_list params;
+	union acpi_object in_obj;
+	acpi_status rv;
+
+	params.count = 1;
+	params.pointer = &in_obj;
+	in_obj.type = ACPI_TYPE_INTEGER;
+	in_obj.integer.value = 2;
+
+	rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET,
+				   &params, &kblv);
+	if (ACPI_FAILURE(rv)) {
+		pr_warn("Error reading kled level\n");
+		return -ENODEV;
+	}
+	return kblv;
+}
+
+static int asus_kled_set(struct asus_laptop *asus, int kblv)
+{
+	if (kblv > 0)
+		kblv = (1 << 7) | (kblv & 0x7F);
+	else
+		kblv = 0;
+
+	if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) {
+		pr_warn("Keyboard LED display write failed\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void asus_kled_cdev_set(struct led_classdev *led_cdev,
+			      enum led_brightness value)
+{
+	struct asus_led *led = container_of(led_cdev, struct asus_led, led);
+	struct asus_laptop *asus = led->asus;
+
+	led->wk = value;
+	queue_work(asus->led_workqueue, &led->work);
+}
+
+static void asus_kled_cdev_update(struct work_struct *work)
+{
+	struct asus_led *led = container_of(work, struct asus_led, work);
+	struct asus_laptop *asus = led->asus;
+
+	asus_kled_set(asus, led->wk);
+}
+
+static enum led_brightness asus_kled_cdev_get(struct led_classdev *led_cdev)
+{
+	struct asus_led *led = container_of(led_cdev, struct asus_led, led);
+	struct asus_laptop *asus = led->asus;
+
+	return asus_kled_lvl(asus);
+}
+
+static void asus_led_exit(struct asus_laptop *asus)
+{
+	led_classdev_unregister(&asus->wled.led);
+	led_classdev_unregister(&asus->bled.led);
+	led_classdev_unregister(&asus->mled.led);
+	led_classdev_unregister(&asus->tled.led);
+	led_classdev_unregister(&asus->pled.led);
+	led_classdev_unregister(&asus->rled.led);
+	led_classdev_unregister(&asus->gled.led);
+	led_classdev_unregister(&asus->kled.led);
+
+	if (asus->led_workqueue) {
+		destroy_workqueue(asus->led_workqueue);
+		asus->led_workqueue = NULL;
+	}
+}
+
+/*  Ugly macro, need to fix that later */
+static int asus_led_register(struct asus_laptop *asus,
+			     struct asus_led *led,
+			     const char *name, const char *method)
+{
+	struct led_classdev *led_cdev = &led->led;
+
+	if (!method || acpi_check_handle(asus->handle, method, NULL))
+		return 0; /* Led not present */
+
+	led->asus = asus;
+	led->method = method;
+
+	INIT_WORK(&led->work, asus_led_cdev_update);
+	led_cdev->name = name;
+	led_cdev->brightness_set = asus_led_cdev_set;
+	led_cdev->brightness_get = asus_led_cdev_get;
+	led_cdev->max_brightness = 1;
+	return led_classdev_register(&asus->platform_device->dev, led_cdev);
+}
+
+static int asus_led_init(struct asus_laptop *asus)
+{
+	int r = 0;
+
+	/*
+	 * The Pegatron Lucid has no physical leds, but all methods are
+	 * available in the DSDT...
+	 */
+	if (asus->is_pega_lucid)
+		return 0;
+
+	/*
+	 * Functions that actually update the LED's are called from a
+	 * workqueue. By doing this as separate work rather than when the LED
+	 * subsystem asks, we avoid messing with the Asus ACPI stuff during a
+	 * potentially bad time, such as a timer interrupt.
+	 */
+	asus->led_workqueue = create_singlethread_workqueue("led_workqueue");
+	if (!asus->led_workqueue)
+		return -ENOMEM;
+
+	if (asus->wled_type == TYPE_LED)
+		r = asus_led_register(asus, &asus->wled, "asus::wlan",
+				      METHOD_WLAN);
+	if (r)
+		goto error;
+	if (asus->bled_type == TYPE_LED)
+		r = asus_led_register(asus, &asus->bled, "asus::bluetooth",
+				      METHOD_BLUETOOTH);
+	if (r)
+		goto error;
+	r = asus_led_register(asus, &asus->mled, "asus::mail", METHOD_MLED);
+	if (r)
+		goto error;
+	r = asus_led_register(asus, &asus->tled, "asus::touchpad", METHOD_TLED);
+	if (r)
+		goto error;
+	r = asus_led_register(asus, &asus->rled, "asus::record", METHOD_RLED);
+	if (r)
+		goto error;
+	r = asus_led_register(asus, &asus->pled, "asus::phone", METHOD_PLED);
+	if (r)
+		goto error;
+	r = asus_led_register(asus, &asus->gled, "asus::gaming", METHOD_GLED);
+	if (r)
+		goto error;
+	if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL) &&
+	    !acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_GET, NULL)) {
+		struct asus_led *led = &asus->kled;
+		struct led_classdev *cdev = &led->led;
+
+		led->asus = asus;
+
+		INIT_WORK(&led->work, asus_kled_cdev_update);
+		cdev->name = "asus::kbd_backlight";
+		cdev->brightness_set = asus_kled_cdev_set;
+		cdev->brightness_get = asus_kled_cdev_get;
+		cdev->max_brightness = 3;
+		r = led_classdev_register(&asus->platform_device->dev, cdev);
+	}
+error:
+	if (r)
+		asus_led_exit(asus);
+	return r;
+}
+
+/*
+ * Backlight device
+ */
+static int asus_read_brightness(struct backlight_device *bd)
+{
+	struct asus_laptop *asus = bl_get_data(bd);
+	unsigned long long value;
+	acpi_status rv;
+
+	rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET,
+				   NULL, &value);
+	if (ACPI_FAILURE(rv)) {
+		pr_warn("Error reading brightness\n");
+		return 0;
+	}
+
+	return value;
+}
+
+static int asus_set_brightness(struct backlight_device *bd, int value)
+{
+	struct asus_laptop *asus = bl_get_data(bd);
+
+	if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) {
+		pr_warn("Error changing brightness\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+	int value = bd->props.brightness;
+
+	return asus_set_brightness(bd, value);
+}
+
+static const struct backlight_ops asusbl_ops = {
+	.get_brightness = asus_read_brightness,
+	.update_status = update_bl_status,
+};
+
+static int asus_backlight_notify(struct asus_laptop *asus)
+{
+	struct backlight_device *bd = asus->backlight_device;
+	int old = bd->props.brightness;
+
+	backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY);
+
+	return old;
+}
+
+static int asus_backlight_init(struct asus_laptop *asus)
+{
+	struct backlight_device *bd;
+	struct backlight_properties props;
+
+	if (acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_GET, NULL) ||
+	    acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_SET, NULL))
+		return 0;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 15;
+	props.type = BACKLIGHT_PLATFORM;
+
+	bd = backlight_device_register(ASUS_LAPTOP_FILE,
+				       &asus->platform_device->dev, asus,
+				       &asusbl_ops, &props);
+	if (IS_ERR(bd)) {
+		pr_err("Could not register asus backlight device\n");
+		asus->backlight_device = NULL;
+		return PTR_ERR(bd);
+	}
+
+	asus->backlight_device = bd;
+	bd->props.brightness = asus_read_brightness(bd);
+	bd->props.power = FB_BLANK_UNBLANK;
+	backlight_update_status(bd);
+	return 0;
+}
+
+static void asus_backlight_exit(struct asus_laptop *asus)
+{
+	backlight_device_unregister(asus->backlight_device);
+	asus->backlight_device = NULL;
+}
+
+/*
+ * Platform device handlers
+ */
+
+/*
+ * We write our info in page, we begin at offset off and cannot write more
+ * than count bytes. We set eof to 1 if we handle those 2 values. We return the
+ * number of bytes written in page
+ */
+static ssize_t infos_show(struct device *dev, struct device_attribute *attr,
+			  char *page)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	int len = 0;
+	unsigned long long temp;
+	char buf[16];		/* enough for all info */
+	acpi_status rv;
+
+	/*
+	 * We use the easy way, we don't care of off and count,
+	 * so we don't set eof to 1
+	 */
+
+	len += sprintf(page, ASUS_LAPTOP_NAME " " ASUS_LAPTOP_VERSION "\n");
+	len += sprintf(page + len, "Model reference    : %s\n", asus->name);
+	/*
+	 * The SFUN method probably allows the original driver to get the list
+	 * of features supported by a given model. For now, 0x0100 or 0x0800
+	 * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
+	 * The significance of others is yet to be found.
+	 */
+	rv = acpi_evaluate_integer(asus->handle, "SFUN", NULL, &temp);
+	if (ACPI_SUCCESS(rv))
+		len += sprintf(page + len, "SFUN value         : %#x\n",
+			       (uint) temp);
+	/*
+	 * The HWRS method return informations about the hardware.
+	 * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+	 * 0x40 for WWAN, 0x10 for WIMAX.
+	 * The significance of others is yet to be found.
+	 * We don't currently use this for device detection, and it
+	 * takes several seconds to run on some systems.
+	 */
+	rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp);
+	if (ACPI_SUCCESS(rv))
+		len += sprintf(page + len, "HWRS value         : %#x\n",
+			       (uint) temp);
+	/*
+	 * Another value for userspace: the ASYM method returns 0x02 for
+	 * battery low and 0x04 for battery critical, its readings tend to be
+	 * more accurate than those provided by _BST.
+	 * Note: since not all the laptops provide this method, errors are
+	 * silently ignored.
+	 */
+	rv = acpi_evaluate_integer(asus->handle, "ASYM", NULL, &temp);
+	if (ACPI_SUCCESS(rv))
+		len += sprintf(page + len, "ASYM value         : %#x\n",
+			       (uint) temp);
+	if (asus->dsdt_info) {
+		snprintf(buf, 16, "%d", asus->dsdt_info->length);
+		len += sprintf(page + len, "DSDT length        : %s\n", buf);
+		snprintf(buf, 16, "%d", asus->dsdt_info->checksum);
+		len += sprintf(page + len, "DSDT checksum      : %s\n", buf);
+		snprintf(buf, 16, "%d", asus->dsdt_info->revision);
+		len += sprintf(page + len, "DSDT revision      : %s\n", buf);
+		snprintf(buf, 7, "%s", asus->dsdt_info->oem_id);
+		len += sprintf(page + len, "OEM id             : %s\n", buf);
+		snprintf(buf, 9, "%s", asus->dsdt_info->oem_table_id);
+		len += sprintf(page + len, "OEM table id       : %s\n", buf);
+		snprintf(buf, 16, "%x", asus->dsdt_info->oem_revision);
+		len += sprintf(page + len, "OEM revision       : 0x%s\n", buf);
+		snprintf(buf, 5, "%s", asus->dsdt_info->asl_compiler_id);
+		len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
+		snprintf(buf, 16, "%x", asus->dsdt_info->asl_compiler_revision);
+		len += sprintf(page + len, "ASL comp revision  : 0x%s\n", buf);
+	}
+
+	return len;
+}
+static DEVICE_ATTR_RO(infos);
+
+static ssize_t sysfs_acpi_set(struct asus_laptop *asus,
+			      const char *buf, size_t count,
+			      const char *method)
+{
+	int rv, value;
+
+	rv = kstrtoint(buf, 0, &value);
+	if (rv < 0)
+		return rv;
+
+	if (write_acpi_int(asus->handle, method, value))
+		return -ENODEV;
+	return count;
+}
+
+/*
+ * LEDD display
+ */
+static ssize_t ledd_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "0x%08x\n", asus->ledd_status);
+}
+
+static ssize_t ledd_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	int rv, value;
+
+	rv = kstrtoint(buf, 0, &value);
+	if (rv < 0)
+		return rv;
+
+	if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
+		pr_warn("LED display write failed\n");
+		return -ENODEV;
+	}
+
+	asus->ledd_status = (u32) value;
+	return count;
+}
+static DEVICE_ATTR_RW(ledd);
+
+/*
+ * Wireless
+ */
+static int asus_wireless_status(struct asus_laptop *asus, int mask)
+{
+	unsigned long long status;
+	acpi_status rv = AE_OK;
+
+	if (!asus->have_rsts)
+		return (asus->wireless_status & mask) ? 1 : 0;
+
+	rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS,
+				   NULL, &status);
+	if (ACPI_FAILURE(rv)) {
+		pr_warn("Error reading Wireless status\n");
+		return -EINVAL;
+	}
+	return !!(status & mask);
+}
+
+/*
+ * WLAN
+ */
+static int asus_wlan_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) {
+		pr_warn("Error setting wlan status to %d\n", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t wlan_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, WL_RSTS));
+}
+
+static ssize_t wlan_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_WLAN);
+}
+static DEVICE_ATTR_RW(wlan);
+
+/*e
+ * Bluetooth
+ */
+static int asus_bluetooth_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) {
+		pr_warn("Error setting bluetooth status to %d\n", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t bluetooth_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, BT_RSTS));
+}
+
+static ssize_t bluetooth_store(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_BLUETOOTH);
+}
+static DEVICE_ATTR_RW(bluetooth);
+
+/*
+ * Wimax
+ */
+static int asus_wimax_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
+		pr_warn("Error setting wimax status to %d\n", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t wimax_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS));
+}
+
+static ssize_t wimax_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX);
+}
+static DEVICE_ATTR_RW(wimax);
+
+/*
+ * Wwan
+ */
+static int asus_wwan_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
+		pr_warn("Error setting wwan status to %d\n", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t wwan_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS));
+}
+
+static ssize_t wwan_store(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_WWAN);
+}
+static DEVICE_ATTR_RW(wwan);
+
+/*
+ * Display
+ */
+static void asus_set_display(struct asus_laptop *asus, int value)
+{
+	/* no sanity check needed for now */
+	if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value))
+		pr_warn("Error setting display\n");
+	return;
+}
+
+/*
+ * Experimental support for display switching. As of now: 1 should activate
+ * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI.
+ * Any combination (bitwise) of these will suffice. I never actually tested 4
+ * displays hooked up simultaneously, so be warned. See the acpi4asus README
+ * for more info.
+ */
+static ssize_t display_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	int rv, value;
+
+	rv = kstrtoint(buf, 0, &value);
+	if (rv < 0)
+		return rv;
+
+	asus_set_display(asus, value);
+	return count;
+}
+static DEVICE_ATTR_WO(display);
+
+/*
+ * Light Sens
+ */
+static void asus_als_switch(struct asus_laptop *asus, int value)
+{
+	int ret;
+
+	if (asus->is_pega_lucid) {
+		ret = asus_pega_lucid_set(asus, PEGA_ALS, value);
+		if (!ret)
+			ret = asus_pega_lucid_set(asus, PEGA_ALS_POWER, value);
+	} else {
+		ret = write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value);
+	}
+	if (ret)
+		pr_warn("Error setting light sensor switch\n");
+
+	asus->light_switch = value;
+}
+
+static ssize_t ls_switch_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus->light_switch);
+}
+
+static ssize_t ls_switch_store(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	int rv, value;
+
+	rv = kstrtoint(buf, 0, &value);
+	if (rv < 0)
+		return rv;
+
+	asus_als_switch(asus, value ? 1 : 0);
+	return count;
+}
+static DEVICE_ATTR_RW(ls_switch);
+
+static void asus_als_level(struct asus_laptop *asus, int value)
+{
+	if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value))
+		pr_warn("Error setting light sensor level\n");
+	asus->light_level = value;
+}
+
+static ssize_t ls_level_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus->light_level);
+}
+
+static ssize_t ls_level_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	int rv, value;
+
+	rv = kstrtoint(buf, 0, &value);
+	if (rv < 0)
+		return rv;
+
+	value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+	/* 0 <= value <= 15 */
+	asus_als_level(asus, value);
+
+	return count;
+}
+static DEVICE_ATTR_RW(ls_level);
+
+static int pega_int_read(struct asus_laptop *asus, int arg, int *result)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	int err = write_acpi_int_ret(asus->handle, METHOD_PEGA_READ, arg,
+				     &buffer);
+	if (!err) {
+		union acpi_object *obj = buffer.pointer;
+		if (obj && obj->type == ACPI_TYPE_INTEGER)
+			*result = obj->integer.value;
+		else
+			err = -EIO;
+	}
+	return err;
+}
+
+static ssize_t ls_value_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	int err, hi, lo;
+
+	err = pega_int_read(asus, PEGA_READ_ALS_H, &hi);
+	if (!err)
+		err = pega_int_read(asus, PEGA_READ_ALS_L, &lo);
+	if (!err)
+		return sprintf(buf, "%d\n", 10 * hi + lo);
+	return err;
+}
+static DEVICE_ATTR_RO(ls_value);
+
+/*
+ * GPS
+ */
+static int asus_gps_status(struct asus_laptop *asus)
+{
+	unsigned long long status;
+	acpi_status rv;
+
+	rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS,
+				   NULL, &status);
+	if (ACPI_FAILURE(rv)) {
+		pr_warn("Error reading GPS status\n");
+		return -ENODEV;
+	}
+	return !!status;
+}
+
+static int asus_gps_switch(struct asus_laptop *asus, int status)
+{
+	const char *meth = status ? METHOD_GPS_ON : METHOD_GPS_OFF;
+
+	if (write_acpi_int(asus->handle, meth, 0x02))
+		return -ENODEV;
+	return 0;
+}
+
+static ssize_t gps_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_gps_status(asus));
+}
+
+static ssize_t gps_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	int rv, value;
+	int ret;
+
+	rv = kstrtoint(buf, 0, &value);
+	if (rv < 0)
+		return rv;
+	ret = asus_gps_switch(asus, !!value);
+	if (ret)
+		return ret;
+	rfkill_set_sw_state(asus->gps.rfkill, !value);
+	return count;
+}
+static DEVICE_ATTR_RW(gps);
+
+/*
+ * rfkill
+ */
+static int asus_gps_rfkill_set(void *data, bool blocked)
+{
+	struct asus_laptop *asus = data;
+
+	return asus_gps_switch(asus, !blocked);
+}
+
+static const struct rfkill_ops asus_gps_rfkill_ops = {
+	.set_block = asus_gps_rfkill_set,
+};
+
+static int asus_rfkill_set(void *data, bool blocked)
+{
+	struct asus_rfkill *rfk = data;
+	struct asus_laptop *asus = rfk->asus;
+
+	if (rfk->control_id == WL_RSTS)
+		return asus_wlan_set(asus, !blocked);
+	else if (rfk->control_id == BT_RSTS)
+		return asus_bluetooth_set(asus, !blocked);
+	else if (rfk->control_id == WM_RSTS)
+		return asus_wimax_set(asus, !blocked);
+	else if (rfk->control_id == WW_RSTS)
+		return asus_wwan_set(asus, !blocked);
+
+	return -EINVAL;
+}
+
+static const struct rfkill_ops asus_rfkill_ops = {
+	.set_block = asus_rfkill_set,
+};
+
+static void asus_rfkill_terminate(struct asus_rfkill *rfk)
+{
+	if (!rfk->rfkill)
+		return ;
+
+	rfkill_unregister(rfk->rfkill);
+	rfkill_destroy(rfk->rfkill);
+	rfk->rfkill = NULL;
+}
+
+static void asus_rfkill_exit(struct asus_laptop *asus)
+{
+	asus_rfkill_terminate(&asus->wwan);
+	asus_rfkill_terminate(&asus->bluetooth);
+	asus_rfkill_terminate(&asus->wlan);
+	asus_rfkill_terminate(&asus->gps);
+}
+
+static int asus_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk,
+			     const char *name, int control_id, int type,
+			     const struct rfkill_ops *ops)
+{
+	int result;
+
+	rfk->control_id = control_id;
+	rfk->asus = asus;
+	rfk->rfkill = rfkill_alloc(name, &asus->platform_device->dev,
+				   type, ops, rfk);
+	if (!rfk->rfkill)
+		return -EINVAL;
+
+	result = rfkill_register(rfk->rfkill);
+	if (result) {
+		rfkill_destroy(rfk->rfkill);
+		rfk->rfkill = NULL;
+	}
+
+	return result;
+}
+
+static int asus_rfkill_init(struct asus_laptop *asus)
+{
+	int result = 0;
+
+	if (asus->is_pega_lucid)
+		return -ENODEV;
+
+	if (!acpi_check_handle(asus->handle, METHOD_GPS_ON, NULL) &&
+	    !acpi_check_handle(asus->handle, METHOD_GPS_OFF, NULL) &&
+	    !acpi_check_handle(asus->handle, METHOD_GPS_STATUS, NULL))
+		result = asus_rfkill_setup(asus, &asus->gps, "asus-gps",
+					   -1, RFKILL_TYPE_GPS,
+					   &asus_gps_rfkill_ops);
+	if (result)
+		goto exit;
+
+
+	if (!acpi_check_handle(asus->handle, METHOD_WLAN, NULL) &&
+	    asus->wled_type == TYPE_RFKILL)
+		result = asus_rfkill_setup(asus, &asus->wlan, "asus-wlan",
+					   WL_RSTS, RFKILL_TYPE_WLAN,
+					   &asus_rfkill_ops);
+	if (result)
+		goto exit;
+
+	if (!acpi_check_handle(asus->handle, METHOD_BLUETOOTH, NULL) &&
+	    asus->bled_type == TYPE_RFKILL)
+		result = asus_rfkill_setup(asus, &asus->bluetooth,
+					   "asus-bluetooth", BT_RSTS,
+					   RFKILL_TYPE_BLUETOOTH,
+					   &asus_rfkill_ops);
+	if (result)
+		goto exit;
+
+	if (!acpi_check_handle(asus->handle, METHOD_WWAN, NULL))
+		result = asus_rfkill_setup(asus, &asus->wwan, "asus-wwan",
+					   WW_RSTS, RFKILL_TYPE_WWAN,
+					   &asus_rfkill_ops);
+	if (result)
+		goto exit;
+
+	if (!acpi_check_handle(asus->handle, METHOD_WIMAX, NULL))
+		result = asus_rfkill_setup(asus, &asus->wimax, "asus-wimax",
+					   WM_RSTS, RFKILL_TYPE_WIMAX,
+					   &asus_rfkill_ops);
+	if (result)
+		goto exit;
+
+exit:
+	if (result)
+		asus_rfkill_exit(asus);
+
+	return result;
+}
+
+static int pega_rfkill_set(void *data, bool blocked)
+{
+	struct asus_rfkill *rfk = data;
+
+	int ret = asus_pega_lucid_set(rfk->asus, rfk->control_id, !blocked);
+	return ret;
+}
+
+static const struct rfkill_ops pega_rfkill_ops = {
+	.set_block = pega_rfkill_set,
+};
+
+static int pega_rfkill_setup(struct asus_laptop *asus, struct asus_rfkill *rfk,
+			     const char *name, int controlid, int rfkill_type)
+{
+	return asus_rfkill_setup(asus, rfk, name, controlid, rfkill_type,
+				 &pega_rfkill_ops);
+}
+
+static int pega_rfkill_init(struct asus_laptop *asus)
+{
+	int ret = 0;
+
+	if(!asus->is_pega_lucid)
+		return -ENODEV;
+
+	ret = pega_rfkill_setup(asus, &asus->wlan, "pega-wlan",
+				PEGA_WLAN, RFKILL_TYPE_WLAN);
+	if(ret)
+		goto exit;
+
+	ret = pega_rfkill_setup(asus, &asus->bluetooth, "pega-bt",
+				PEGA_BLUETOOTH, RFKILL_TYPE_BLUETOOTH);
+	if(ret)
+		goto exit;
+
+	ret = pega_rfkill_setup(asus, &asus->wwan, "pega-wwan",
+				PEGA_WWAN, RFKILL_TYPE_WWAN);
+
+exit:
+	if (ret)
+		asus_rfkill_exit(asus);
+
+	return ret;
+}
+
+/*
+ * Input device (i.e. hotkeys)
+ */
+static void asus_input_notify(struct asus_laptop *asus, int event)
+{
+	if (!asus->inputdev)
+		return ;
+	if (!sparse_keymap_report_event(asus->inputdev, event, 1, true))
+		pr_info("Unknown key %x pressed\n", event);
+}
+
+static int asus_input_init(struct asus_laptop *asus)
+{
+	struct input_dev *input;
+	int error;
+
+	input = input_allocate_device();
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "Asus Laptop extra buttons";
+	input->phys = ASUS_LAPTOP_FILE "/input0";
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = &asus->platform_device->dev;
+
+	error = sparse_keymap_setup(input, asus_keymap, NULL);
+	if (error) {
+		pr_err("Unable to setup input device keymap\n");
+		goto err_free_dev;
+	}
+	error = input_register_device(input);
+	if (error) {
+		pr_warn("Unable to register input device\n");
+		goto err_free_dev;
+	}
+
+	asus->inputdev = input;
+	return 0;
+
+err_free_dev:
+	input_free_device(input);
+	return error;
+}
+
+static void asus_input_exit(struct asus_laptop *asus)
+{
+	if (asus->inputdev)
+		input_unregister_device(asus->inputdev);
+	asus->inputdev = NULL;
+}
+
+/*
+ * ACPI driver
+ */
+static void asus_acpi_notify(struct acpi_device *device, u32 event)
+{
+	struct asus_laptop *asus = acpi_driver_data(device);
+	u16 count;
+
+	/* TODO Find a better way to handle events count. */
+	count = asus->event_count[event % 128]++;
+	acpi_bus_generate_netlink_event(asus->device->pnp.device_class,
+					dev_name(&asus->device->dev), event,
+					count);
+
+	if (event >= ATKD_BRNUP_MIN && event <= ATKD_BRNUP_MAX)
+		event = ATKD_BRNUP;
+	else if (event >= ATKD_BRNDOWN_MIN &&
+		 event <= ATKD_BRNDOWN_MAX)
+		event = ATKD_BRNDOWN;
+
+	/* Brightness events are special */
+	if (event == ATKD_BRNDOWN || event == ATKD_BRNUP) {
+		if (asus->backlight_device != NULL) {
+			/* Update the backlight device. */
+			asus_backlight_notify(asus);
+			return ;
+		}
+	}
+
+	/* Accelerometer "coarse orientation change" event */
+	if (asus->pega_accel_poll && event == 0xEA) {
+		kobject_uevent(&asus->pega_accel_poll->dev.kobj, KOBJ_CHANGE);
+		return ;
+	}
+
+	asus_input_notify(asus, event);
+}
+
+static struct attribute *asus_attributes[] = {
+	&dev_attr_infos.attr,
+	&dev_attr_wlan.attr,
+	&dev_attr_bluetooth.attr,
+	&dev_attr_wimax.attr,
+	&dev_attr_wwan.attr,
+	&dev_attr_display.attr,
+	&dev_attr_ledd.attr,
+	&dev_attr_ls_value.attr,
+	&dev_attr_ls_level.attr,
+	&dev_attr_ls_switch.attr,
+	&dev_attr_gps.attr,
+	NULL
+};
+
+static umode_t asus_sysfs_is_visible(struct kobject *kobj,
+				    struct attribute *attr,
+				    int idx)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+	acpi_handle handle = asus->handle;
+	bool supported;
+
+	if (asus->is_pega_lucid) {
+		/* no ls_level interface on the Lucid */
+		if (attr == &dev_attr_ls_switch.attr)
+			supported = true;
+		else if (attr == &dev_attr_ls_level.attr)
+			supported = false;
+		else
+			goto normal;
+
+		return supported ? attr->mode : 0;
+	}
+
+normal:
+	if (attr == &dev_attr_wlan.attr) {
+		supported = !acpi_check_handle(handle, METHOD_WLAN, NULL);
+
+	} else if (attr == &dev_attr_bluetooth.attr) {
+		supported = !acpi_check_handle(handle, METHOD_BLUETOOTH, NULL);
+
+	} else if (attr == &dev_attr_display.attr) {
+		supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL);
+
+	} else if (attr == &dev_attr_wimax.attr) {
+		supported =
+			!acpi_check_handle(asus->handle, METHOD_WIMAX, NULL);
+
+	} else if (attr == &dev_attr_wwan.attr) {
+		supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL);
+
+	} else if (attr == &dev_attr_ledd.attr) {
+		supported = !acpi_check_handle(handle, METHOD_LEDD, NULL);
+
+	} else if (attr == &dev_attr_ls_switch.attr ||
+		   attr == &dev_attr_ls_level.attr) {
+		supported = !acpi_check_handle(handle, METHOD_ALS_CONTROL, NULL) &&
+			!acpi_check_handle(handle, METHOD_ALS_LEVEL, NULL);
+	} else if (attr == &dev_attr_ls_value.attr) {
+		supported = asus->is_pega_lucid;
+	} else if (attr == &dev_attr_gps.attr) {
+		supported = !acpi_check_handle(handle, METHOD_GPS_ON, NULL) &&
+			    !acpi_check_handle(handle, METHOD_GPS_OFF, NULL) &&
+			    !acpi_check_handle(handle, METHOD_GPS_STATUS, NULL);
+	} else {
+		supported = true;
+	}
+
+	return supported ? attr->mode : 0;
+}
+
+
+static const struct attribute_group asus_attr_group = {
+	.is_visible	= asus_sysfs_is_visible,
+	.attrs		= asus_attributes,
+};
+
+static int asus_platform_init(struct asus_laptop *asus)
+{
+	int result;
+
+	asus->platform_device = platform_device_alloc(ASUS_LAPTOP_FILE, PLATFORM_DEVID_NONE);
+	if (!asus->platform_device)
+		return -ENOMEM;
+	platform_set_drvdata(asus->platform_device, asus);
+
+	result = platform_device_add(asus->platform_device);
+	if (result)
+		goto fail_platform_device;
+
+	result = sysfs_create_group(&asus->platform_device->dev.kobj,
+				    &asus_attr_group);
+	if (result)
+		goto fail_sysfs;
+
+	return 0;
+
+fail_sysfs:
+	platform_device_del(asus->platform_device);
+fail_platform_device:
+	platform_device_put(asus->platform_device);
+	return result;
+}
+
+static void asus_platform_exit(struct asus_laptop *asus)
+{
+	sysfs_remove_group(&asus->platform_device->dev.kobj, &asus_attr_group);
+	platform_device_unregister(asus->platform_device);
+}
+
+static struct platform_driver platform_driver = {
+	.driver = {
+		.name = ASUS_LAPTOP_FILE,
+	},
+};
+
+/*
+ * This function is used to initialize the context with right values. In this
+ * method, we can make all the detection we want, and modify the asus_laptop
+ * struct
+ */
+static int asus_laptop_get_info(struct asus_laptop *asus)
+{
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *model = NULL;
+	unsigned long long bsts_result;
+	char *string = NULL;
+	acpi_status status;
+
+	/*
+	 * Get DSDT headers early enough to allow for differentiating between
+	 * models, but late enough to allow acpi_bus_register_driver() to fail
+	 * before doing anything ACPI-specific. Should we encounter a machine,
+	 * which needs special handling (i.e. its hotkey device has a different
+	 * HID), this bit will be moved.
+	 */
+	status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info);
+	if (ACPI_FAILURE(status))
+		pr_warn("Couldn't get the DSDT table header\n");
+
+	/* We have to write 0 on init this far for all ASUS models */
+	if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) {
+		pr_err("Hotkey initialization failed\n");
+		return -ENODEV;
+	}
+
+	/* This needs to be called for some laptops to init properly */
+	status =
+	    acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result);
+	if (ACPI_FAILURE(status))
+		pr_warn("Error calling BSTS\n");
+	else if (bsts_result)
+		pr_notice("BSTS called, 0x%02x returned\n",
+		       (uint) bsts_result);
+
+	/* This too ... */
+	if (write_acpi_int(asus->handle, "CWAP", wapf))
+		pr_err("Error calling CWAP(%d)\n", wapf);
+	/*
+	 * Try to match the object returned by INIT to the specific model.
+	 * Handle every possible object (or the lack of thereof) the DSDT
+	 * writers might throw at us. When in trouble, we pass NULL to
+	 * asus_model_match() and try something completely different.
+	 */
+	if (buffer.pointer) {
+		model = buffer.pointer;
+		switch (model->type) {
+		case ACPI_TYPE_STRING:
+			string = model->string.pointer;
+			break;
+		case ACPI_TYPE_BUFFER:
+			string = model->buffer.pointer;
+			break;
+		default:
+			string = "";
+			break;
+		}
+	}
+	asus->name = kstrdup(string, GFP_KERNEL);
+	if (!asus->name) {
+		kfree(buffer.pointer);
+		return -ENOMEM;
+	}
+
+	if (string)
+		pr_notice("  %s model detected\n", string);
+
+	if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL))
+		asus->have_rsts = true;
+
+	kfree(model);
+
+	return AE_OK;
+}
+
+static int asus_acpi_init(struct asus_laptop *asus)
+{
+	int result = 0;
+
+	result = acpi_bus_get_status(asus->device);
+	if (result)
+		return result;
+	if (!asus->device->status.present) {
+		pr_err("Hotkey device not present, aborting\n");
+		return -ENODEV;
+	}
+
+	result = asus_laptop_get_info(asus);
+	if (result)
+		return result;
+
+	if (!strcmp(bled_type, "led"))
+		asus->bled_type = TYPE_LED;
+	else if (!strcmp(bled_type, "rfkill"))
+		asus->bled_type = TYPE_RFKILL;
+
+	if (!strcmp(wled_type, "led"))
+		asus->wled_type = TYPE_LED;
+	else if (!strcmp(wled_type, "rfkill"))
+		asus->wled_type = TYPE_RFKILL;
+
+	if (bluetooth_status >= 0)
+		asus_bluetooth_set(asus, !!bluetooth_status);
+
+	if (wlan_status >= 0)
+		asus_wlan_set(asus, !!wlan_status);
+
+	if (wimax_status >= 0)
+		asus_wimax_set(asus, !!wimax_status);
+
+	if (wwan_status >= 0)
+		asus_wwan_set(asus, !!wwan_status);
+
+	/* Keyboard Backlight is on by default */
+	if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL))
+		asus_kled_set(asus, 1);
+
+	/* LED display is off by default */
+	asus->ledd_status = 0xFFF;
+
+	/* Set initial values of light sensor and level */
+	asus->light_switch = !!als_status;
+	asus->light_level = 5;	/* level 5 for sensor sensitivity */
+
+	if (asus->is_pega_lucid) {
+		asus_als_switch(asus, asus->light_switch);
+	} else if (!acpi_check_handle(asus->handle, METHOD_ALS_CONTROL, NULL) &&
+		   !acpi_check_handle(asus->handle, METHOD_ALS_LEVEL, NULL)) {
+		asus_als_switch(asus, asus->light_switch);
+		asus_als_level(asus, asus->light_level);
+	}
+
+	return result;
+}
+
+static void asus_dmi_check(void)
+{
+	const char *model;
+
+	model = dmi_get_system_info(DMI_PRODUCT_NAME);
+	if (!model)
+		return;
+
+	/* On L1400B WLED control the sound card, don't mess with it ... */
+	if (strncmp(model, "L1400B", 6) == 0) {
+		wlan_status = -1;
+	}
+}
+
+static bool asus_device_present;
+
+static int asus_acpi_add(struct acpi_device *device)
+{
+	struct asus_laptop *asus;
+	int result;
+
+	pr_notice("Asus Laptop Support version %s\n",
+		  ASUS_LAPTOP_VERSION);
+	asus = kzalloc(sizeof(struct asus_laptop), GFP_KERNEL);
+	if (!asus)
+		return -ENOMEM;
+	asus->handle = device->handle;
+	strcpy(acpi_device_name(device), ASUS_LAPTOP_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ASUS_LAPTOP_CLASS);
+	device->driver_data = asus;
+	asus->device = device;
+
+	asus_dmi_check();
+
+	result = asus_acpi_init(asus);
+	if (result)
+		goto fail_platform;
+
+	/*
+	 * Need platform type detection first, then the platform
+	 * device.  It is used as a parent for the sub-devices below.
+	 */
+	asus->is_pega_lucid = asus_check_pega_lucid(asus);
+	result = asus_platform_init(asus);
+	if (result)
+		goto fail_platform;
+
+	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
+		result = asus_backlight_init(asus);
+		if (result)
+			goto fail_backlight;
+	}
+
+	result = asus_input_init(asus);
+	if (result)
+		goto fail_input;
+
+	result = asus_led_init(asus);
+	if (result)
+		goto fail_led;
+
+	result = asus_rfkill_init(asus);
+	if (result && result != -ENODEV)
+		goto fail_rfkill;
+
+	result = pega_accel_init(asus);
+	if (result && result != -ENODEV)
+		goto fail_pega_accel;
+
+	result = pega_rfkill_init(asus);
+	if (result && result != -ENODEV)
+		goto fail_pega_rfkill;
+
+	asus_device_present = true;
+	return 0;
+
+fail_pega_rfkill:
+	pega_accel_exit(asus);
+fail_pega_accel:
+	asus_rfkill_exit(asus);
+fail_rfkill:
+	asus_led_exit(asus);
+fail_led:
+	asus_input_exit(asus);
+fail_input:
+	asus_backlight_exit(asus);
+fail_backlight:
+	asus_platform_exit(asus);
+fail_platform:
+	kfree(asus);
+
+	return result;
+}
+
+static int asus_acpi_remove(struct acpi_device *device)
+{
+	struct asus_laptop *asus = acpi_driver_data(device);
+
+	asus_backlight_exit(asus);
+	asus_rfkill_exit(asus);
+	asus_led_exit(asus);
+	asus_input_exit(asus);
+	pega_accel_exit(asus);
+	asus_platform_exit(asus);
+
+	kfree(asus->name);
+	kfree(asus);
+	return 0;
+}
+
+static const struct acpi_device_id asus_device_ids[] = {
+	{"ATK0100", 0},
+	{"ATK0101", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, asus_device_ids);
+
+static struct acpi_driver asus_acpi_driver = {
+	.name = ASUS_LAPTOP_NAME,
+	.class = ASUS_LAPTOP_CLASS,
+	.owner = THIS_MODULE,
+	.ids = asus_device_ids,
+	.flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
+	.ops = {
+		.add = asus_acpi_add,
+		.remove = asus_acpi_remove,
+		.notify = asus_acpi_notify,
+		},
+};
+
+static int __init asus_laptop_init(void)
+{
+	int result;
+
+	result = platform_driver_register(&platform_driver);
+	if (result < 0)
+		return result;
+
+	result = acpi_bus_register_driver(&asus_acpi_driver);
+	if (result < 0)
+		goto fail_acpi_driver;
+	if (!asus_device_present) {
+		result = -ENODEV;
+		goto fail_no_device;
+	}
+	return 0;
+
+fail_no_device:
+	acpi_bus_unregister_driver(&asus_acpi_driver);
+fail_acpi_driver:
+	platform_driver_unregister(&platform_driver);
+	return result;
+}
+
+static void __exit asus_laptop_exit(void)
+{
+	acpi_bus_unregister_driver(&asus_acpi_driver);
+	platform_driver_unregister(&platform_driver);
+}
+
+module_init(asus_laptop_init);
+module_exit(asus_laptop_exit);