Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 205 insertions, 0 deletions

diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
new file mode 100644
index 000000000..794968bda
--- /dev/null
+++ b/drivers/platform/x86/intel/Kconfig
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Intel x86 Platform Specific Drivers
+#
+
+source "drivers/platform/x86/intel/atomisp2/Kconfig"
+source "drivers/platform/x86/intel/ifs/Kconfig"
+source "drivers/platform/x86/intel/int1092/Kconfig"
+source "drivers/platform/x86/intel/int3472/Kconfig"
+source "drivers/platform/x86/intel/pmc/Kconfig"
+source "drivers/platform/x86/intel/pmt/Kconfig"
+source "drivers/platform/x86/intel/speed_select_if/Kconfig"
+source "drivers/platform/x86/intel/telemetry/Kconfig"
+source "drivers/platform/x86/intel/wmi/Kconfig"
+source "drivers/platform/x86/intel/uncore-frequency/Kconfig"
+
+
+config INTEL_HID_EVENT
+	tristate "Intel HID Event"
+	depends on ACPI
+	depends on INPUT
+	depends on I2C
+	select INPUT_SPARSEKMAP
+	help
+	  This driver provides support for the Intel HID Event hotkey interface.
+	  Some laptops require this driver for hotkey support.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_hid.
+
+config INTEL_VBTN
+	tristate "Intel Virtual Button"
+	depends on ACPI
+	depends on INPUT
+	depends on I2C
+	select INPUT_SPARSEKMAP
+	help
+	  This driver provides support for the Intel Virtual Button interface.
+	  Some laptops require this driver for power button support.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_vbtn.
+
+config INTEL_INT0002_VGPIO
+	tristate "Intel ACPI INT0002 Virtual GPIO driver"
+	depends on GPIOLIB && ACPI && PM_SLEEP
+	select GPIOLIB_IRQCHIP
+	help
+	  Some peripherals on Bay Trail and Cherry Trail platforms signal a
+	  Power Management Event (PME) to the Power Management Controller (PMC)
+	  to wakeup the system. When this happens software needs to explicitly
+	  clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
+	  IRQ storm on IRQ 9.
+
+	  This is modelled in ACPI through the INT0002 ACPI device, which is
+	  called a "Virtual GPIO controller" in ACPI because it defines the
+	  event handler to call when the PME triggers through _AEI and _L02
+	  methods as would be done for a real GPIO interrupt in ACPI.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_int0002_vgpio.
+
+config INTEL_OAKTRAIL
+	tristate "Intel Oaktrail Platform Extras"
+	depends on ACPI
+	depends on ACPI_VIDEO || ACPI_VIDEO=n
+	depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
+	help
+	  Intel Oaktrail platform need this driver to provide interfaces to
+	  enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
+	  here; it will only load on supported platforms.
+
+config INTEL_BXTWC_PMIC_TMU
+	tristate "Intel Broxton Whiskey Cove TMU Driver"
+	depends on INTEL_SOC_PMIC_BXTWC
+	depends on MFD_INTEL_PMC_BXT
+	select REGMAP
+	help
+	  Select this driver to use Intel Broxton Whiskey Cove PMIC TMU feature.
+	  This driver enables the alarm wakeup functionality in the TMU unit of
+	  Whiskey Cove PMIC.
+
+config INTEL_CHTDC_TI_PWRBTN
+	tristate "Intel Cherry Trail Dollar Cove TI power button driver"
+	depends on INTEL_SOC_PMIC_CHTDC_TI
+	depends on INPUT
+	help
+	  This option adds a power button driver for Dollar Cove TI
+	  PMIC on Intel Cherry Trail devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_chtdc_ti_pwrbtn.
+
+config INTEL_CHTWC_INT33FE
+	tristate "Intel Cherry Trail Whiskey Cove ACPI INT33FE Driver"
+	depends on X86 && ACPI && I2C && REGULATOR
+	depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
+	depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
+	depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
+	help
+	  This driver add support for the Intel Cherry Trail Whiskey Cove
+	  INT33FE ACPI device found on the GPD win and the GPD pocket.
+
+	  The INT33FE ACPI device on these mini laptops contains I2cSerialBusV2
+	  resources for a MAX17042 Fuel Gauge, FUSB302 USB Type-C Controller
+	  and PI3USB30532 USB switch.
+	  This driver instantiates i2c-clients for these, so that standard
+	  i2c drivers for these chips can bind to the them.
+
+	  If you enable this driver it is advised to also select
+	  CONFIG_TYPEC_FUSB302=m, CONFIG_TYPEC_MUX_PI3USB30532=m and
+	  CONFIG_BATTERY_MAX17042=m.
+
+config INTEL_ISHTP_ECLITE
+	tristate "Intel ISHTP eclite controller Driver"
+	depends on INTEL_ISH_HID
+	depends on ACPI
+	help
+	  This driver is for accessing the PSE (Programmable Service Engine) -
+	  an Embedded Controller like IP - using ISHTP (Integrated Sensor Hub
+	  Transport Protocol) to get battery, thermal and UCSI (USB Type-C
+	  Connector System Software Interface) related data from the platform.
+	  Users who don't want to use discrete Embedded Controller on Intel's
+	  Elkhartlake platform can leverage this integrated solution of
+	  ECLite which is part of PSE subsystem.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_ishtp_eclite.
+
+config INTEL_MRFLD_PWRBTN
+	tristate "Intel Merrifield Basin Cove power button driver"
+	depends on INTEL_SOC_PMIC_MRFLD
+	depends on INPUT
+	help
+	  This option adds a power button driver for Basin Cove PMIC
+	  on Intel Merrifield devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_mrfld_pwrbtn.
+
+config INTEL_PUNIT_IPC
+	tristate "Intel P-Unit IPC Driver"
+	help
+	  This driver provides support for Intel P-Unit Mailbox IPC mechanism,
+	  which is used to bridge the communications between kernel and P-Unit.
+
+config INTEL_RST
+	tristate "Intel Rapid Start Technology Driver"
+	depends on ACPI
+	help
+	  This driver provides support for modifying parameters on systems
+	  equipped with Intel's Rapid Start Technology. When put in an ACPI
+	  sleep state, these devices will wake after either a configured
+	  timeout or when the system battery reaches a critical state,
+	  automatically copying memory contents to disk. On resume, the
+	  firmware will copy the memory contents back to RAM and resume the OS
+	  as usual.
+
+config INTEL_SDSI
+	tristate "Intel Software Defined Silicon Driver"
+	depends on INTEL_VSEC
+	depends on X86_64
+	help
+	  This driver enables access to the Intel Software Defined Silicon
+	  interface used to provision silicon features with an authentication
+	  certificate and capability license.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_sdsi.
+
+config INTEL_SMARTCONNECT
+	tristate "Intel Smart Connect disabling driver"
+	depends on ACPI
+	help
+	  Intel Smart Connect is a technology intended to permit devices to
+	  update state by resuming for a short period of time at regular
+	  intervals. If a user enables this functionality under Windows and
+	  then reboots into Linux, the system may remain configured to resume
+	  on suspend. In the absence of any userspace to support it, the system
+	  will then remain awake until something triggers another suspend.
+
+	  This driver checks to determine whether the device has Intel Smart
+	  Connect enabled, and if so disables it.
+
+config INTEL_TURBO_MAX_3
+	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
+	depends on X86_64 && SCHED_MC_PRIO
+	help
+	  This driver reads maximum performance ratio of each CPU and set up
+	  the scheduler priority metrics. In this way scheduler can prefer
+	  CPU with higher performance to schedule tasks.
+
+	  This driver is only required when the system is not using Hardware
+	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
+
+config INTEL_VSEC
+	tristate "Intel Vendor Specific Extended Capabilities Driver"
+	depends on PCI
+	select AUXILIARY_BUS
+	help
+	  Adds support for feature drivers exposed using Intel PCIe VSEC and
+	  DVSEC.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called intel_vsec.