Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 683 insertions, 0 deletions

diff --git a/drivers/scsi/aacraid/rx.c b/drivers/scsi/aacraid/rx.c
new file mode 100644
index 000000000..e06ff83b6
--- /dev/null
+++ b/drivers/scsi/aacraid/rx.c
@@ -0,0 +1,683 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *	Adaptec AAC series RAID controller driver
+ *	(c) Copyright 2001 Red Hat Inc.
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000-2010 Adaptec, Inc.
+ *               2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)
+ *		 2016-2017 Microsemi Corp. (aacraid@microsemi.com)
+ *
+ * Module Name:
+ *  rx.c
+ *
+ * Abstract: Hardware miniport for Drawbridge specific hardware functions.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+
+#include <scsi/scsi_host.h>
+
+#include "aacraid.h"
+
+static irqreturn_t aac_rx_intr_producer(int irq, void *dev_id)
+{
+	struct aac_dev *dev = dev_id;
+	unsigned long bellbits;
+	u8 intstat = rx_readb(dev, MUnit.OISR);
+
+	/*
+	 *	Read mask and invert because drawbridge is reversed.
+	 *	This allows us to only service interrupts that have
+	 *	been enabled.
+	 *	Check to see if this is our interrupt.  If it isn't just return
+	 */
+	if (likely(intstat & ~(dev->OIMR))) {
+		bellbits = rx_readl(dev, OutboundDoorbellReg);
+		if (unlikely(bellbits & DoorBellPrintfReady)) {
+			aac_printf(dev, readl (&dev->IndexRegs->Mailbox[5]));
+			rx_writel(dev, MUnit.ODR,DoorBellPrintfReady);
+			rx_writel(dev, InboundDoorbellReg,DoorBellPrintfDone);
+		}
+		else if (unlikely(bellbits & DoorBellAdapterNormCmdReady)) {
+			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdReady);
+			aac_command_normal(&dev->queues->queue[HostNormCmdQueue]);
+		}
+		else if (likely(bellbits & DoorBellAdapterNormRespReady)) {
+			rx_writel(dev, MUnit.ODR,DoorBellAdapterNormRespReady);
+			aac_response_normal(&dev->queues->queue[HostNormRespQueue]);
+		}
+		else if (unlikely(bellbits & DoorBellAdapterNormCmdNotFull)) {
+			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+		}
+		else if (unlikely(bellbits & DoorBellAdapterNormRespNotFull)) {
+			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormCmdNotFull);
+			rx_writel(dev, MUnit.ODR, DoorBellAdapterNormRespNotFull);
+		}
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static irqreturn_t aac_rx_intr_message(int irq, void *dev_id)
+{
+	int isAif, isFastResponse, isSpecial;
+	struct aac_dev *dev = dev_id;
+	u32 Index = rx_readl(dev, MUnit.OutboundQueue);
+	if (unlikely(Index == 0xFFFFFFFFL))
+		Index = rx_readl(dev, MUnit.OutboundQueue);
+	if (likely(Index != 0xFFFFFFFFL)) {
+		do {
+			isAif = isFastResponse = isSpecial = 0;
+			if (Index & 0x00000002L) {
+				isAif = 1;
+				if (Index == 0xFFFFFFFEL)
+					isSpecial = 1;
+				Index &= ~0x00000002L;
+			} else {
+				if (Index & 0x00000001L)
+					isFastResponse = 1;
+				Index >>= 2;
+			}
+			if (!isSpecial) {
+				if (unlikely(aac_intr_normal(dev,
+						Index, isAif,
+						isFastResponse, NULL))) {
+					rx_writel(dev,
+						MUnit.OutboundQueue,
+						Index);
+					rx_writel(dev,
+						MUnit.ODR,
+						DoorBellAdapterNormRespReady);
+				}
+			}
+			Index = rx_readl(dev, MUnit.OutboundQueue);
+		} while (Index != 0xFFFFFFFFL);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+/**
+ *	aac_rx_disable_interrupt	-	Disable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_rx_disable_interrupt(struct aac_dev *dev)
+{
+	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
+}
+
+/**
+ *	aac_rx_enable_interrupt_producer	-	Enable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_rx_enable_interrupt_producer(struct aac_dev *dev)
+{
+	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
+}
+
+/**
+ *	aac_rx_enable_interrupt_message	-	Enable interrupts
+ *	@dev: Adapter
+ */
+
+static void aac_rx_enable_interrupt_message(struct aac_dev *dev)
+{
+	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xf7);
+}
+
+/**
+ *	rx_sync_cmd	-	send a command and wait
+ *	@dev: Adapter
+ *	@command: Command to execute
+ *	@p1: first parameter
+ *	@p2: second parameter
+ *	@p3: third parameter
+ *	@p4: forth parameter
+ *	@p5: fifth parameter
+ *	@p6: sixth parameter
+ *	@status: adapter status
+ *	@r1: first return value
+ *	@r2: second return value
+ *	@r3: third return value
+ *	@r4: forth return value
+ *
+ *	This routine will send a synchronous command to the adapter and wait 
+ *	for its	completion.
+ */
+
+static int rx_sync_cmd(struct aac_dev *dev, u32 command,
+	u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
+	u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
+{
+	unsigned long start;
+	int ok;
+	/*
+	 *	Write the command into Mailbox 0
+	 */
+	writel(command, &dev->IndexRegs->Mailbox[0]);
+	/*
+	 *	Write the parameters into Mailboxes 1 - 6
+	 */
+	writel(p1, &dev->IndexRegs->Mailbox[1]);
+	writel(p2, &dev->IndexRegs->Mailbox[2]);
+	writel(p3, &dev->IndexRegs->Mailbox[3]);
+	writel(p4, &dev->IndexRegs->Mailbox[4]);
+	/*
+	 *	Clear the synch command doorbell to start on a clean slate.
+	 */
+	rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+	/*
+	 *	Disable doorbell interrupts
+	 */
+	rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
+	/*
+	 *	Force the completion of the mask register write before issuing
+	 *	the interrupt.
+	 */
+	rx_readb (dev, MUnit.OIMR);
+	/*
+	 *	Signal that there is a new synch command
+	 */
+	rx_writel(dev, InboundDoorbellReg, INBOUNDDOORBELL_0);
+
+	ok = 0;
+	start = jiffies;
+
+	/*
+	 *	Wait up to 30 seconds
+	 */
+	while (time_before(jiffies, start+30*HZ)) 
+	{
+		udelay(5);	/* Delay 5 microseconds to let Mon960 get info. */
+		/*
+		 *	Mon960 will set doorbell0 bit when it has completed the command.
+		 */
+		if (rx_readl(dev, OutboundDoorbellReg) & OUTBOUNDDOORBELL_0) {
+			/*
+			 *	Clear the doorbell.
+			 */
+			rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+			ok = 1;
+			break;
+		}
+		/*
+		 *	Yield the processor in case we are slow 
+		 */
+		msleep(1);
+	}
+	if (unlikely(ok != 1)) {
+		/*
+		 *	Restore interrupt mask even though we timed out
+		 */
+		aac_adapter_enable_int(dev);
+		return -ETIMEDOUT;
+	}
+	/*
+	 *	Pull the synch status from Mailbox 0.
+	 */
+	if (status)
+		*status = readl(&dev->IndexRegs->Mailbox[0]);
+	if (r1)
+		*r1 = readl(&dev->IndexRegs->Mailbox[1]);
+	if (r2)
+		*r2 = readl(&dev->IndexRegs->Mailbox[2]);
+	if (r3)
+		*r3 = readl(&dev->IndexRegs->Mailbox[3]);
+	if (r4)
+		*r4 = readl(&dev->IndexRegs->Mailbox[4]);
+	/*
+	 *	Clear the synch command doorbell.
+	 */
+	rx_writel(dev, OutboundDoorbellReg, OUTBOUNDDOORBELL_0);
+	/*
+	 *	Restore interrupt mask
+	 */
+	aac_adapter_enable_int(dev);
+	return 0;
+
+}
+
+/**
+ *	aac_rx_interrupt_adapter	-	interrupt adapter
+ *	@dev: Adapter
+ *
+ *	Send an interrupt to the i960 and breakpoint it.
+ */
+
+static void aac_rx_interrupt_adapter(struct aac_dev *dev)
+{
+	rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+}
+
+/**
+ *	aac_rx_notify_adapter		-	send an event to the adapter
+ *	@dev: Adapter
+ *	@event: Event to send
+ *
+ *	Notify the i960 that something it probably cares about has
+ *	happened.
+ */
+
+static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
+{
+	switch (event) {
+
+	case AdapNormCmdQue:
+		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_1);
+		break;
+	case HostNormRespNotFull:
+		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_4);
+		break;
+	case AdapNormRespQue:
+		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_2);
+		break;
+	case HostNormCmdNotFull:
+		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
+		break;
+	case HostShutdown:
+		break;
+	case FastIo:
+		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
+		break;
+	case AdapPrintfDone:
+		rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_5);
+		break;
+	default:
+		BUG();
+		break;
+	}
+}
+
+/**
+ *	aac_rx_start_adapter		-	activate adapter
+ *	@dev:	Adapter
+ *
+ *	Start up processing on an i960 based AAC adapter
+ */
+
+static void aac_rx_start_adapter(struct aac_dev *dev)
+{
+	union aac_init *init;
+
+	init = dev->init;
+	init->r7.host_elapsed_seconds = cpu_to_le32(ktime_get_real_seconds());
+	// We can only use a 32 bit address here
+	rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
+	  0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
+}
+
+/**
+ *	aac_rx_check_health
+ *	@dev: device to check if healthy
+ *
+ *	Will attempt to determine if the specified adapter is alive and
+ *	capable of handling requests, returning 0 if alive.
+ */
+static int aac_rx_check_health(struct aac_dev *dev)
+{
+	u32 status = rx_readl(dev, MUnit.OMRx[0]);
+
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	if (unlikely(status & SELF_TEST_FAILED))
+		return -1;
+	/*
+	 *	Check to see if the board panic'd.
+	 */
+	if (unlikely(status & KERNEL_PANIC)) {
+		char * buffer;
+		struct POSTSTATUS {
+			__le32 Post_Command;
+			__le32 Post_Address;
+		} * post;
+		dma_addr_t paddr, baddr;
+		int ret;
+
+		if (likely((status & 0xFF000000L) == 0xBC000000L))
+			return (status >> 16) & 0xFF;
+		buffer = dma_alloc_coherent(&dev->pdev->dev, 512, &baddr,
+					    GFP_KERNEL);
+		ret = -2;
+		if (unlikely(buffer == NULL))
+			return ret;
+		post = dma_alloc_coherent(&dev->pdev->dev,
+					  sizeof(struct POSTSTATUS), &paddr,
+					  GFP_KERNEL);
+		if (unlikely(post == NULL)) {
+			dma_free_coherent(&dev->pdev->dev, 512, buffer, baddr);
+			return ret;
+		}
+		memset(buffer, 0, 512);
+		post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
+		post->Post_Address = cpu_to_le32(baddr);
+		rx_writel(dev, MUnit.IMRx[0], paddr);
+		rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
+		  NULL, NULL, NULL, NULL, NULL);
+		dma_free_coherent(&dev->pdev->dev, sizeof(struct POSTSTATUS),
+				  post, paddr);
+		if (likely((buffer[0] == '0') && ((buffer[1] == 'x') || (buffer[1] == 'X')))) {
+			ret = (hex_to_bin(buffer[2]) << 4) +
+				hex_to_bin(buffer[3]);
+		}
+		dma_free_coherent(&dev->pdev->dev, 512, buffer, baddr);
+		return ret;
+	}
+	/*
+	 *	Wait for the adapter to be up and running.
+	 */
+	if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
+		return -3;
+	/*
+	 *	Everything is OK
+	 */
+	return 0;
+}
+
+/**
+ *	aac_rx_deliver_producer
+ *	@fib: fib to issue
+ *
+ *	Will send a fib, returning 0 if successful.
+ */
+int aac_rx_deliver_producer(struct fib * fib)
+{
+	struct aac_dev *dev = fib->dev;
+	struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
+	u32 Index;
+	unsigned long nointr = 0;
+
+	aac_queue_get( dev, &Index, AdapNormCmdQueue, fib->hw_fib_va, 1, fib, &nointr);
+
+	atomic_inc(&q->numpending);
+	*(q->headers.producer) = cpu_to_le32(Index + 1);
+	if (!(nointr & aac_config.irq_mod))
+		aac_adapter_notify(dev, AdapNormCmdQueue);
+
+	return 0;
+}
+
+/**
+ *	aac_rx_deliver_message
+ *	@fib: fib to issue
+ *
+ *	Will send a fib, returning 0 if successful.
+ */
+static int aac_rx_deliver_message(struct fib * fib)
+{
+	struct aac_dev *dev = fib->dev;
+	struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
+	u32 Index;
+	u64 addr;
+	volatile void __iomem *device;
+
+	unsigned long count = 10000000L; /* 50 seconds */
+	atomic_inc(&q->numpending);
+	for(;;) {
+		Index = rx_readl(dev, MUnit.InboundQueue);
+		if (unlikely(Index == 0xFFFFFFFFL))
+			Index = rx_readl(dev, MUnit.InboundQueue);
+		if (likely(Index != 0xFFFFFFFFL))
+			break;
+		if (--count == 0) {
+			atomic_dec(&q->numpending);
+			return -ETIMEDOUT;
+		}
+		udelay(5);
+	}
+	device = dev->base + Index;
+	addr = fib->hw_fib_pa;
+	writel((u32)(addr & 0xffffffff), device);
+	device += sizeof(u32);
+	writel((u32)(addr >> 32), device);
+	device += sizeof(u32);
+	writel(le16_to_cpu(fib->hw_fib_va->header.Size), device);
+	rx_writel(dev, MUnit.InboundQueue, Index);
+	return 0;
+}
+
+/**
+ *	aac_rx_ioremap
+ *	@dev: adapter
+ *	@size: mapping resize request
+ *
+ */
+static int aac_rx_ioremap(struct aac_dev * dev, u32 size)
+{
+	if (!size) {
+		iounmap(dev->regs.rx);
+		return 0;
+	}
+	dev->base = dev->regs.rx = ioremap(dev->base_start, size);
+	if (dev->base == NULL)
+		return -1;
+	dev->IndexRegs = &dev->regs.rx->IndexRegs;
+	return 0;
+}
+
+static int aac_rx_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type)
+{
+	u32 var = 0;
+
+	if (!(dev->supplement_adapter_info.supported_options2 &
+	  AAC_OPTION_MU_RESET) || (bled >= 0) || (bled == -2)) {
+		if (bled)
+			printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
+				dev->name, dev->id, bled);
+		else {
+			bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
+			  0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
+			if (!bled && (var != 0x00000001) && (var != 0x3803000F))
+				bled = -EINVAL;
+		}
+		if (bled && (bled != -ETIMEDOUT))
+			bled = aac_adapter_sync_cmd(dev, IOP_RESET,
+			  0, 0, 0, 0, 0, 0, &var, NULL, NULL, NULL, NULL);
+
+		if (bled && (bled != -ETIMEDOUT))
+			return -EINVAL;
+	}
+	if (bled && (var == 0x3803000F)) { /* USE_OTHER_METHOD */
+		rx_writel(dev, MUnit.reserved2, 3);
+		msleep(5000); /* Delay 5 seconds */
+		var = 0x00000001;
+	}
+	if (bled && (var != 0x00000001))
+		return -EINVAL;
+	ssleep(5);
+	if (rx_readl(dev, MUnit.OMRx[0]) & KERNEL_PANIC)
+		return -ENODEV;
+	if (startup_timeout < 300)
+		startup_timeout = 300;
+	return 0;
+}
+
+/**
+ *	aac_rx_select_comm	-	Select communications method
+ *	@dev: Adapter
+ *	@comm: communications method
+ */
+
+int aac_rx_select_comm(struct aac_dev *dev, int comm)
+{
+	switch (comm) {
+	case AAC_COMM_PRODUCER:
+		dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_producer;
+		dev->a_ops.adapter_intr = aac_rx_intr_producer;
+		dev->a_ops.adapter_deliver = aac_rx_deliver_producer;
+		break;
+	case AAC_COMM_MESSAGE:
+		dev->a_ops.adapter_enable_int = aac_rx_enable_interrupt_message;
+		dev->a_ops.adapter_intr = aac_rx_intr_message;
+		dev->a_ops.adapter_deliver = aac_rx_deliver_message;
+		break;
+	default:
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ *	_aac_rx_init	-	initialize an i960 based AAC card
+ *	@dev: device to configure
+ *
+ *	Allocate and set up resources for the i960 based AAC variants. The 
+ *	device_interface in the commregion will be allocated and linked 
+ *	to the comm region.
+ */
+
+int _aac_rx_init(struct aac_dev *dev)
+{
+	unsigned long start;
+	unsigned long status;
+	int restart = 0;
+	int instance = dev->id;
+	const char * name = dev->name;
+
+	if (aac_adapter_ioremap(dev, dev->base_size)) {
+		printk(KERN_WARNING "%s: unable to map adapter.\n", name);
+		goto error_iounmap;
+	}
+
+	/* Failure to reset here is an option ... */
+	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
+	dev->a_ops.adapter_enable_int = aac_rx_disable_interrupt;
+	dev->OIMR = status = rx_readb (dev, MUnit.OIMR);
+
+	if (((status & 0x0c) != 0x0c) || dev->init_reset) {
+		dev->init_reset = false;
+		if (!aac_rx_restart_adapter(dev, 0, IOP_HWSOFT_RESET)) {
+			/* Make sure the Hardware FIFO is empty */
+			while ((++restart < 512) &&
+			       (rx_readl(dev, MUnit.OutboundQueue) != 0xFFFFFFFFL));
+		}
+	}
+
+	/*
+	 *	Check to see if the board panic'd while booting.
+	 */
+	status = rx_readl(dev, MUnit.OMRx[0]);
+	if (status & KERNEL_PANIC) {
+		if (aac_rx_restart_adapter(dev,
+			aac_rx_check_health(dev), IOP_HWSOFT_RESET))
+			goto error_iounmap;
+		++restart;
+	}
+	/*
+	 *	Check to see if the board failed any self tests.
+	 */
+	status = rx_readl(dev, MUnit.OMRx[0]);
+	if (status & SELF_TEST_FAILED) {
+		printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
+		goto error_iounmap;
+	}
+	/*
+	 *	Check to see if the monitor panic'd while booting.
+	 */
+	if (status & MONITOR_PANIC) {
+		printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
+		goto error_iounmap;
+	}
+	start = jiffies;
+	/*
+	 *	Wait for the adapter to be up and running. Wait up to 3 minutes
+	 */
+	while (!((status = rx_readl(dev, MUnit.OMRx[0])) & KERNEL_UP_AND_RUNNING))
+	{
+		if ((restart &&
+		  (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
+		  time_after(jiffies, start+HZ*startup_timeout)) {
+			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n", 
+					dev->name, instance, status);
+			goto error_iounmap;
+		}
+		if (!restart &&
+		  ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
+		  time_after(jiffies, start + HZ *
+		  ((startup_timeout > 60)
+		    ? (startup_timeout - 60)
+		    : (startup_timeout / 2))))) {
+			if (likely(!aac_rx_restart_adapter(dev,
+				aac_rx_check_health(dev), IOP_HWSOFT_RESET)))
+				start = jiffies;
+			++restart;
+		}
+		msleep(1);
+	}
+	if (restart && aac_commit)
+		aac_commit = 1;
+	/*
+	 *	Fill in the common function dispatch table.
+	 */
+	dev->a_ops.adapter_interrupt = aac_rx_interrupt_adapter;
+	dev->a_ops.adapter_disable_int = aac_rx_disable_interrupt;
+	dev->a_ops.adapter_notify = aac_rx_notify_adapter;
+	dev->a_ops.adapter_sync_cmd = rx_sync_cmd;
+	dev->a_ops.adapter_check_health = aac_rx_check_health;
+	dev->a_ops.adapter_restart = aac_rx_restart_adapter;
+	dev->a_ops.adapter_start = aac_rx_start_adapter;
+
+	/*
+	 *	First clear out all interrupts.  Then enable the one's that we
+	 *	can handle.
+	 */
+	aac_adapter_comm(dev, AAC_COMM_PRODUCER);
+	aac_adapter_disable_int(dev);
+	rx_writel(dev, MUnit.ODR, 0xffffffff);
+	aac_adapter_enable_int(dev);
+
+	if (aac_init_adapter(dev) == NULL)
+		goto error_iounmap;
+	aac_adapter_comm(dev, dev->comm_interface);
+	dev->sync_mode = 0;	/* sync. mode not supported */
+	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+	if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
+			IRQF_SHARED, "aacraid", dev) < 0) {
+		if (dev->msi)
+			pci_disable_msi(dev->pdev);
+		printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
+			name, instance);
+		goto error_iounmap;
+	}
+	dev->dbg_base = dev->base_start;
+	dev->dbg_base_mapped = dev->base;
+	dev->dbg_size = dev->base_size;
+
+	aac_adapter_enable_int(dev);
+	/*
+	 *	Tell the adapter that all is configured, and it can
+	 * start accepting requests
+	 */
+	aac_rx_start_adapter(dev);
+
+	return 0;
+
+error_iounmap:
+
+	return -1;
+}
+
+int aac_rx_init(struct aac_dev *dev)
+{
+	/*
+	 *	Fill in the function dispatch table.
+	 */
+	dev->a_ops.adapter_ioremap = aac_rx_ioremap;
+	dev->a_ops.adapter_comm = aac_rx_select_comm;
+
+	return _aac_rx_init(dev);
+}