Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1082 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
new file mode 100644
index 000000000..e2207d014
--- /dev/null
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -0,0 +1,1082 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * aspeed-vhub -- Driver for Aspeed SoC "vHub" USB gadget
+ *
+ * hub.c - virtual hub handling
+ *
+ * Copyright 2017 IBM Corporation
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/prefetch.h>
+#include <linux/clk.h>
+#include <linux/usb/gadget.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bcd.h>
+#include <linux/version.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "vhub.h"
+
+/* usb 2.0 hub device descriptor
+ *
+ * A few things we may want to improve here:
+ *
+ *    - We may need to indicate TT support
+ *    - We may need a device qualifier descriptor
+ *	as devices can pretend to be usb1 or 2
+ *    - Make vid/did overridable
+ *    - make it look like usb1 if usb1 mode forced
+ */
+#define KERNEL_REL	bin2bcd(LINUX_VERSION_MAJOR)
+#define KERNEL_VER	bin2bcd(LINUX_VERSION_PATCHLEVEL)
+
+enum {
+	AST_VHUB_STR_INDEX_MAX = 4,
+	AST_VHUB_STR_MANUF = 3,
+	AST_VHUB_STR_PRODUCT = 2,
+	AST_VHUB_STR_SERIAL = 1,
+};
+
+static const struct usb_device_descriptor ast_vhub_dev_desc = {
+	.bLength		= USB_DT_DEVICE_SIZE,
+	.bDescriptorType	= USB_DT_DEVICE,
+	.bcdUSB			= cpu_to_le16(0x0200),
+	.bDeviceClass		= USB_CLASS_HUB,
+	.bDeviceSubClass	= 0,
+	.bDeviceProtocol	= 1,
+	.bMaxPacketSize0	= 64,
+	.idVendor		= cpu_to_le16(0x1d6b),
+	.idProduct		= cpu_to_le16(0x0107),
+	.bcdDevice		= cpu_to_le16(0x0100),
+	.iManufacturer		= AST_VHUB_STR_MANUF,
+	.iProduct		= AST_VHUB_STR_PRODUCT,
+	.iSerialNumber		= AST_VHUB_STR_SERIAL,
+	.bNumConfigurations	= 1,
+};
+
+static const struct usb_qualifier_descriptor ast_vhub_qual_desc = {
+	.bLength = 0xA,
+	.bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB = cpu_to_le16(0x0200),
+	.bDeviceClass = USB_CLASS_HUB,
+	.bDeviceSubClass = 0,
+	.bDeviceProtocol = 0,
+	.bMaxPacketSize0 = 64,
+	.bNumConfigurations = 1,
+	.bRESERVED = 0,
+};
+
+/*
+ * Configuration descriptor: same comments as above
+ * regarding handling USB1 mode.
+ */
+
+/*
+ * We don't use sizeof() as Linux definition of
+ * struct usb_endpoint_descriptor contains 2
+ * extra bytes
+ */
+#define AST_VHUB_CONF_DESC_SIZE	(USB_DT_CONFIG_SIZE + \
+				 USB_DT_INTERFACE_SIZE + \
+				 USB_DT_ENDPOINT_SIZE)
+
+static const struct ast_vhub_full_cdesc ast_vhub_conf_desc = {
+	.cfg = {
+		.bLength		= USB_DT_CONFIG_SIZE,
+		.bDescriptorType	= USB_DT_CONFIG,
+		.wTotalLength		= cpu_to_le16(AST_VHUB_CONF_DESC_SIZE),
+		.bNumInterfaces		= 1,
+		.bConfigurationValue	= 1,
+		.iConfiguration		= 0,
+		.bmAttributes		= USB_CONFIG_ATT_ONE |
+					  USB_CONFIG_ATT_SELFPOWER |
+					  USB_CONFIG_ATT_WAKEUP,
+		.bMaxPower		= 0,
+	},
+	.intf = {
+		.bLength		= USB_DT_INTERFACE_SIZE,
+		.bDescriptorType	= USB_DT_INTERFACE,
+		.bInterfaceNumber	= 0,
+		.bAlternateSetting	= 0,
+		.bNumEndpoints		= 1,
+		.bInterfaceClass	= USB_CLASS_HUB,
+		.bInterfaceSubClass	= 0,
+		.bInterfaceProtocol	= 0,
+		.iInterface		= 0,
+	},
+	.ep = {
+		.bLength		= USB_DT_ENDPOINT_SIZE,
+		.bDescriptorType	= USB_DT_ENDPOINT,
+		.bEndpointAddress	= 0x81,
+		.bmAttributes		= USB_ENDPOINT_XFER_INT,
+		.wMaxPacketSize		= cpu_to_le16(1),
+		.bInterval		= 0x0c,
+	},
+};
+
+#define AST_VHUB_HUB_DESC_SIZE	(USB_DT_HUB_NONVAR_SIZE + 2)
+
+static const struct usb_hub_descriptor ast_vhub_hub_desc = {
+	.bDescLength			= AST_VHUB_HUB_DESC_SIZE,
+	.bDescriptorType		= USB_DT_HUB,
+	.bNbrPorts			= AST_VHUB_NUM_PORTS,
+	.wHubCharacteristics		= cpu_to_le16(HUB_CHAR_NO_LPSM),
+	.bPwrOn2PwrGood			= 10,
+	.bHubContrCurrent		= 0,
+	.u.hs.DeviceRemovable[0]	= 0,
+	.u.hs.DeviceRemovable[1]	= 0xff,
+};
+
+/*
+ * These strings converted to UTF-16 must be smaller than
+ * our EP0 buffer.
+ */
+static const struct usb_string ast_vhub_str_array[] = {
+	{
+		.id = AST_VHUB_STR_SERIAL,
+		.s = "00000000"
+	},
+	{
+		.id = AST_VHUB_STR_PRODUCT,
+		.s = "USB Virtual Hub"
+	},
+	{
+		.id = AST_VHUB_STR_MANUF,
+		.s = "Aspeed"
+	},
+	{ }
+};
+
+static const struct usb_gadget_strings ast_vhub_strings = {
+	.language = 0x0409,
+	.strings = (struct usb_string *)ast_vhub_str_array
+};
+
+static int ast_vhub_hub_dev_status(struct ast_vhub_ep *ep,
+				   u16 wIndex, u16 wValue)
+{
+	u8 st0;
+
+	EPDBG(ep, "GET_STATUS(dev)\n");
+
+	/*
+	 * Mark it as self-powered, I doubt the BMC is powered off
+	 * the USB bus ...
+	 */
+	st0 = 1 << USB_DEVICE_SELF_POWERED;
+
+	/*
+	 * Need to double check how remote wakeup actually works
+	 * on that chip and what triggers it.
+	 */
+	if (ep->vhub->wakeup_en)
+		st0 |= 1 << USB_DEVICE_REMOTE_WAKEUP;
+
+	return ast_vhub_simple_reply(ep, st0, 0);
+}
+
+static int ast_vhub_hub_ep_status(struct ast_vhub_ep *ep,
+				  u16 wIndex, u16 wValue)
+{
+	int ep_num;
+	u8 st0 = 0;
+
+	ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
+	EPDBG(ep, "GET_STATUS(ep%d)\n", ep_num);
+
+	/* On the hub we have only EP 0 and 1 */
+	if (ep_num == 1) {
+		if (ep->vhub->ep1_stalled)
+			st0 |= 1 << USB_ENDPOINT_HALT;
+	} else if (ep_num != 0)
+		return std_req_stall;
+
+	return ast_vhub_simple_reply(ep, st0, 0);
+}
+
+static int ast_vhub_hub_dev_feature(struct ast_vhub_ep *ep,
+				    u16 wIndex, u16 wValue,
+				    bool is_set)
+{
+	u32 val;
+
+	EPDBG(ep, "%s_FEATURE(dev val=%02x)\n",
+	      is_set ? "SET" : "CLEAR", wValue);
+
+	if (wValue == USB_DEVICE_REMOTE_WAKEUP) {
+		ep->vhub->wakeup_en = is_set;
+		EPDBG(ep, "Hub remote wakeup %s\n",
+		      is_set ? "enabled" : "disabled");
+		return std_req_complete;
+	}
+
+	if (wValue == USB_DEVICE_TEST_MODE) {
+		val = readl(ep->vhub->regs + AST_VHUB_CTRL);
+		val &= ~GENMASK(10, 8);
+		val |= VHUB_CTRL_SET_TEST_MODE((wIndex >> 8) & 0x7);
+		writel(val, ep->vhub->regs + AST_VHUB_CTRL);
+
+		return std_req_complete;
+	}
+
+	return std_req_stall;
+}
+
+static int ast_vhub_hub_ep_feature(struct ast_vhub_ep *ep,
+				   u16 wIndex, u16 wValue,
+				   bool is_set)
+{
+	int ep_num;
+	u32 reg;
+
+	ep_num = wIndex & USB_ENDPOINT_NUMBER_MASK;
+	EPDBG(ep, "%s_FEATURE(ep%d val=%02x)\n",
+	      is_set ? "SET" : "CLEAR", ep_num, wValue);
+
+	if (ep_num > 1)
+		return std_req_stall;
+	if (wValue != USB_ENDPOINT_HALT)
+		return std_req_stall;
+	if (ep_num == 0)
+		return std_req_complete;
+
+	EPDBG(ep, "%s stall on EP 1\n",
+	      is_set ? "setting" : "clearing");
+
+	ep->vhub->ep1_stalled = is_set;
+	reg = readl(ep->vhub->regs + AST_VHUB_EP1_CTRL);
+	if (is_set) {
+		reg |= VHUB_EP1_CTRL_STALL;
+	} else {
+		reg &= ~VHUB_EP1_CTRL_STALL;
+		reg |= VHUB_EP1_CTRL_RESET_TOGGLE;
+	}
+	writel(reg, ep->vhub->regs + AST_VHUB_EP1_CTRL);
+
+	return std_req_complete;
+}
+
+static int ast_vhub_rep_desc(struct ast_vhub_ep *ep,
+			     u8 desc_type, u16 len)
+{
+	size_t dsize;
+	struct ast_vhub *vhub = ep->vhub;
+
+	EPDBG(ep, "GET_DESCRIPTOR(type:%d)\n", desc_type);
+
+	/*
+	 * Copy first to EP buffer and send from there, so
+	 * we can do some in-place patching if needed. We know
+	 * the EP buffer is big enough but ensure that doesn't
+	 * change. We do that now rather than later after we
+	 * have checked sizes etc... to avoid a gcc bug where
+	 * it thinks len is constant and barfs about read
+	 * overflows in memcpy.
+	 */
+	switch(desc_type) {
+	case USB_DT_DEVICE:
+		dsize = USB_DT_DEVICE_SIZE;
+		memcpy(ep->buf, &vhub->vhub_dev_desc, dsize);
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_dev_desc));
+		BUILD_BUG_ON(USB_DT_DEVICE_SIZE >= AST_VHUB_EP0_MAX_PACKET);
+		break;
+	case USB_DT_OTHER_SPEED_CONFIG:
+	case USB_DT_CONFIG:
+		dsize = AST_VHUB_CONF_DESC_SIZE;
+		memcpy(ep->buf, &vhub->vhub_conf_desc, dsize);
+		((u8 *)ep->buf)[1] = desc_type;
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_conf_desc));
+		BUILD_BUG_ON(AST_VHUB_CONF_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
+		break;
+	case USB_DT_HUB:
+		dsize = AST_VHUB_HUB_DESC_SIZE;
+		memcpy(ep->buf, &vhub->vhub_hub_desc, dsize);
+		BUILD_BUG_ON(dsize > sizeof(vhub->vhub_hub_desc));
+		BUILD_BUG_ON(AST_VHUB_HUB_DESC_SIZE >= AST_VHUB_EP0_MAX_PACKET);
+		break;
+	case USB_DT_DEVICE_QUALIFIER:
+		dsize = sizeof(vhub->vhub_qual_desc);
+		memcpy(ep->buf, &vhub->vhub_qual_desc, dsize);
+		break;
+	default:
+		return std_req_stall;
+	}
+
+	/* Crop requested length */
+	if (len > dsize)
+		len = dsize;
+
+	/* Shoot it from the EP buffer */
+	return ast_vhub_reply(ep, NULL, len);
+}
+
+static struct usb_gadget_strings*
+ast_vhub_str_of_container(struct usb_gadget_string_container *container)
+{
+	return (struct usb_gadget_strings *)container->stash;
+}
+
+static int ast_vhub_collect_languages(struct ast_vhub *vhub, void *buf,
+				      size_t size)
+{
+	int rc, hdr_len, nlangs, max_langs;
+	struct usb_gadget_strings *lang_str;
+	struct usb_gadget_string_container *container;
+	struct usb_string_descriptor *sdesc = buf;
+
+	nlangs = 0;
+	hdr_len = sizeof(struct usb_descriptor_header);
+	max_langs = (size - hdr_len) / sizeof(sdesc->wData[0]);
+	list_for_each_entry(container, &vhub->vhub_str_desc, list) {
+		if (nlangs >= max_langs)
+			break;
+
+		lang_str = ast_vhub_str_of_container(container);
+		sdesc->wData[nlangs++] = cpu_to_le16(lang_str->language);
+	}
+
+	rc = hdr_len + nlangs * sizeof(sdesc->wData[0]);
+	sdesc->bLength = rc;
+	sdesc->bDescriptorType = USB_DT_STRING;
+
+	return rc;
+}
+
+static struct usb_gadget_strings *ast_vhub_lookup_string(struct ast_vhub *vhub,
+							 u16 lang_id)
+{
+	struct usb_gadget_strings *lang_str;
+	struct usb_gadget_string_container *container;
+
+	list_for_each_entry(container, &vhub->vhub_str_desc, list) {
+		lang_str = ast_vhub_str_of_container(container);
+		if (lang_str->language == lang_id)
+			return lang_str;
+	}
+
+	return NULL;
+}
+
+static int ast_vhub_rep_string(struct ast_vhub_ep *ep,
+			       u8 string_id, u16 lang_id,
+			       u16 len)
+{
+	int rc;
+	u8 buf[256];
+	struct ast_vhub *vhub = ep->vhub;
+	struct usb_gadget_strings *lang_str;
+
+	if (string_id == 0) {
+		rc = ast_vhub_collect_languages(vhub, buf, sizeof(buf));
+	} else {
+		lang_str = ast_vhub_lookup_string(vhub, lang_id);
+		if (!lang_str)
+			return std_req_stall;
+
+		rc = usb_gadget_get_string(lang_str, string_id, buf);
+	}
+
+	if (rc < 0 || rc >= AST_VHUB_EP0_MAX_PACKET)
+		return std_req_stall;
+
+	/* Shoot it from the EP buffer */
+	memcpy(ep->buf, buf, rc);
+	return ast_vhub_reply(ep, NULL, min_t(u16, rc, len));
+}
+
+enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep,
+					 struct usb_ctrlrequest *crq)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	u16 wValue, wIndex, wLength;
+
+	wValue = le16_to_cpu(crq->wValue);
+	wIndex = le16_to_cpu(crq->wIndex);
+	wLength = le16_to_cpu(crq->wLength);
+
+	/* First packet, grab speed */
+	if (vhub->speed == USB_SPEED_UNKNOWN) {
+		u32 ustat = readl(vhub->regs + AST_VHUB_USBSTS);
+		if (ustat & VHUB_USBSTS_HISPEED)
+			vhub->speed = USB_SPEED_HIGH;
+		else
+			vhub->speed = USB_SPEED_FULL;
+		UDCDBG(vhub, "USB status=%08x speed=%s\n", ustat,
+		       vhub->speed == USB_SPEED_HIGH ? "high" : "full");
+	}
+
+	switch ((crq->bRequestType << 8) | crq->bRequest) {
+		/* SET_ADDRESS */
+	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
+		EPDBG(ep, "SET_ADDRESS: Got address %x\n", wValue);
+		writel(wValue, vhub->regs + AST_VHUB_CONF);
+		return std_req_complete;
+
+		/* GET_STATUS */
+	case DeviceRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_hub_dev_status(ep, wIndex, wValue);
+	case InterfaceRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_simple_reply(ep, 0, 0);
+	case EndpointRequest | USB_REQ_GET_STATUS:
+		return ast_vhub_hub_ep_status(ep, wIndex, wValue);
+
+		/* SET/CLEAR_FEATURE */
+	case DeviceOutRequest | USB_REQ_SET_FEATURE:
+		return ast_vhub_hub_dev_feature(ep, wIndex, wValue, true);
+	case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
+		return ast_vhub_hub_dev_feature(ep, wIndex, wValue, false);
+	case EndpointOutRequest | USB_REQ_SET_FEATURE:
+		return ast_vhub_hub_ep_feature(ep, wIndex, wValue, true);
+	case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
+		return ast_vhub_hub_ep_feature(ep, wIndex, wValue, false);
+
+		/* GET/SET_CONFIGURATION */
+	case DeviceRequest | USB_REQ_GET_CONFIGURATION:
+		return ast_vhub_simple_reply(ep, 1);
+	case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
+		if (wValue != 1)
+			return std_req_stall;
+		return std_req_complete;
+
+		/* GET_DESCRIPTOR */
+	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
+		switch (wValue >> 8) {
+		case USB_DT_DEVICE:
+		case USB_DT_CONFIG:
+		case USB_DT_DEVICE_QUALIFIER:
+		case USB_DT_OTHER_SPEED_CONFIG:
+			return ast_vhub_rep_desc(ep, wValue >> 8,
+						 wLength);
+		case USB_DT_STRING:
+			return ast_vhub_rep_string(ep, wValue & 0xff,
+						   wIndex, wLength);
+		}
+		return std_req_stall;
+
+		/* GET/SET_INTERFACE */
+	case DeviceRequest | USB_REQ_GET_INTERFACE:
+		return ast_vhub_simple_reply(ep, 0);
+	case DeviceOutRequest | USB_REQ_SET_INTERFACE:
+		if (wValue != 0 || wIndex != 0)
+			return std_req_stall;
+		return std_req_complete;
+	}
+	return std_req_stall;
+}
+
+static void ast_vhub_update_hub_ep1(struct ast_vhub *vhub,
+				    unsigned int port)
+{
+	/* Update HW EP1 response */
+	u32 reg = readl(vhub->regs + AST_VHUB_EP1_STS_CHG);
+	u32 pmask = (1 << (port + 1));
+	if (vhub->ports[port].change)
+		reg |= pmask;
+	else
+		reg &= ~pmask;
+	writel(reg, vhub->regs + AST_VHUB_EP1_STS_CHG);
+}
+
+static void ast_vhub_change_port_stat(struct ast_vhub *vhub,
+				      unsigned int port,
+				      u16 clr_flags,
+				      u16 set_flags,
+				      bool set_c)
+{
+	struct ast_vhub_port *p = &vhub->ports[port];
+	u16 prev;
+
+	/* Update port status */
+	prev = p->status;
+	p->status = (prev & ~clr_flags) | set_flags;
+	DDBG(&p->dev, "port %d status %04x -> %04x (C=%d)\n",
+	     port + 1, prev, p->status, set_c);
+
+	/* Update change bits if needed */
+	if (set_c) {
+		u16 chg = p->status ^ prev;
+
+		/* Only these are relevant for change */
+		chg &= USB_PORT_STAT_C_CONNECTION |
+		       USB_PORT_STAT_C_ENABLE |
+		       USB_PORT_STAT_C_SUSPEND |
+		       USB_PORT_STAT_C_OVERCURRENT |
+		       USB_PORT_STAT_C_RESET |
+		       USB_PORT_STAT_C_L1;
+
+		/*
+		 * We only set USB_PORT_STAT_C_ENABLE if we are disabling
+		 * the port as per USB spec, otherwise MacOS gets upset
+		 */
+		if (p->status & USB_PORT_STAT_ENABLE)
+			chg &= ~USB_PORT_STAT_C_ENABLE;
+
+		p->change = chg;
+		ast_vhub_update_hub_ep1(vhub, port);
+	}
+}
+
+static void ast_vhub_send_host_wakeup(struct ast_vhub *vhub)
+{
+	u32 reg = readl(vhub->regs + AST_VHUB_CTRL);
+	UDCDBG(vhub, "Waking up host !\n");
+	reg |= VHUB_CTRL_MANUAL_REMOTE_WAKEUP;
+	writel(reg, vhub->regs + AST_VHUB_CTRL);
+}
+
+void ast_vhub_device_connect(struct ast_vhub *vhub,
+			     unsigned int port, bool on)
+{
+	if (on)
+		ast_vhub_change_port_stat(vhub, port, 0,
+					  USB_PORT_STAT_CONNECTION, true);
+	else
+		ast_vhub_change_port_stat(vhub, port,
+					  USB_PORT_STAT_CONNECTION |
+					  USB_PORT_STAT_ENABLE,
+					  0, true);
+
+	/*
+	 * If the hub is set to wakup the host on connection events
+	 * then send a wakeup.
+	 */
+	if (vhub->wakeup_en)
+		ast_vhub_send_host_wakeup(vhub);
+}
+
+static void ast_vhub_wake_work(struct work_struct *work)
+{
+	struct ast_vhub *vhub = container_of(work,
+					     struct ast_vhub,
+					     wake_work);
+	unsigned long flags;
+	unsigned int i;
+
+	/*
+	 * Wake all sleeping ports. If a port is suspended by
+	 * the host suspend (without explicit state suspend),
+	 * we let the normal host wake path deal with it later.
+	 */
+	spin_lock_irqsave(&vhub->lock, flags);
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			continue;
+		ast_vhub_change_port_stat(vhub, i,
+					  USB_PORT_STAT_SUSPEND,
+					  0, true);
+		ast_vhub_dev_resume(&p->dev);
+	}
+	ast_vhub_send_host_wakeup(vhub);
+	spin_unlock_irqrestore(&vhub->lock, flags);
+}
+
+void ast_vhub_hub_wake_all(struct ast_vhub *vhub)
+{
+	/*
+	 * A device is trying to wake the world, because this
+	 * can recurse into the device, we break the call chain
+	 * using a work queue
+	 */
+	schedule_work(&vhub->wake_work);
+}
+
+static void ast_vhub_port_reset(struct ast_vhub *vhub, u8 port)
+{
+	struct ast_vhub_port *p = &vhub->ports[port];
+	u16 set, clr, speed;
+
+	/* First mark disabled */
+	ast_vhub_change_port_stat(vhub, port,
+				  USB_PORT_STAT_ENABLE |
+				  USB_PORT_STAT_SUSPEND,
+				  USB_PORT_STAT_RESET,
+				  false);
+
+	if (!p->dev.driver)
+		return;
+
+	/*
+	 * This will either "start" the port or reset the
+	 * device if already started...
+	 */
+	ast_vhub_dev_reset(&p->dev);
+
+	/* Grab the right speed */
+	speed = p->dev.driver->max_speed;
+	if (speed == USB_SPEED_UNKNOWN || speed > vhub->speed)
+		speed = vhub->speed;
+
+	switch (speed) {
+	case USB_SPEED_LOW:
+		set = USB_PORT_STAT_LOW_SPEED;
+		clr = USB_PORT_STAT_HIGH_SPEED;
+		break;
+	case USB_SPEED_FULL:
+		set = 0;
+		clr = USB_PORT_STAT_LOW_SPEED |
+			USB_PORT_STAT_HIGH_SPEED;
+		break;
+	case USB_SPEED_HIGH:
+		set = USB_PORT_STAT_HIGH_SPEED;
+		clr = USB_PORT_STAT_LOW_SPEED;
+		break;
+	default:
+		UDCDBG(vhub, "Unsupported speed %d when"
+		       " connecting device\n",
+		       speed);
+		return;
+	}
+	clr |= USB_PORT_STAT_RESET;
+	set |= USB_PORT_STAT_ENABLE;
+
+	/* This should ideally be delayed ... */
+	ast_vhub_change_port_stat(vhub, port, clr, set, true);
+}
+
+static enum std_req_rc ast_vhub_set_port_feature(struct ast_vhub_ep *ep,
+						 u8 port, u16 feat)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	struct ast_vhub_port *p;
+
+	if (port == 0 || port > vhub->max_ports)
+		return std_req_stall;
+	port--;
+	p = &vhub->ports[port];
+
+	switch(feat) {
+	case USB_PORT_FEAT_SUSPEND:
+		if (!(p->status & USB_PORT_STAT_ENABLE))
+			return std_req_complete;
+		ast_vhub_change_port_stat(vhub, port,
+					  0, USB_PORT_STAT_SUSPEND,
+					  false);
+		ast_vhub_dev_suspend(&p->dev);
+		return std_req_complete;
+	case USB_PORT_FEAT_RESET:
+		EPDBG(ep, "Port reset !\n");
+		ast_vhub_port_reset(vhub, port);
+		return std_req_complete;
+	case USB_PORT_FEAT_POWER:
+		/*
+		 * On Power-on, we mark the connected flag changed,
+		 * if there's a connected device, some hosts will
+		 * otherwise fail to detect it.
+		 */
+		if (p->status & USB_PORT_STAT_CONNECTION) {
+			p->change |= USB_PORT_STAT_C_CONNECTION;
+			ast_vhub_update_hub_ep1(vhub, port);
+		}
+		return std_req_complete;
+	case USB_PORT_FEAT_TEST:
+	case USB_PORT_FEAT_INDICATOR:
+		/* We don't do anything with these */
+		return std_req_complete;
+	}
+	return std_req_stall;
+}
+
+static enum std_req_rc ast_vhub_clr_port_feature(struct ast_vhub_ep *ep,
+						 u8 port, u16 feat)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	struct ast_vhub_port *p;
+
+	if (port == 0 || port > vhub->max_ports)
+		return std_req_stall;
+	port--;
+	p = &vhub->ports[port];
+
+	switch(feat) {
+	case USB_PORT_FEAT_ENABLE:
+		ast_vhub_change_port_stat(vhub, port,
+					  USB_PORT_STAT_ENABLE |
+					  USB_PORT_STAT_SUSPEND, 0,
+					  false);
+		ast_vhub_dev_suspend(&p->dev);
+		return std_req_complete;
+	case USB_PORT_FEAT_SUSPEND:
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			return std_req_complete;
+		ast_vhub_change_port_stat(vhub, port,
+					  USB_PORT_STAT_SUSPEND, 0,
+					  false);
+		ast_vhub_dev_resume(&p->dev);
+		return std_req_complete;
+	case USB_PORT_FEAT_POWER:
+		/* We don't do power control */
+		return std_req_complete;
+	case USB_PORT_FEAT_INDICATOR:
+		/* We don't have indicators */
+		return std_req_complete;
+	case USB_PORT_FEAT_C_CONNECTION:
+	case USB_PORT_FEAT_C_ENABLE:
+	case USB_PORT_FEAT_C_SUSPEND:
+	case USB_PORT_FEAT_C_OVER_CURRENT:
+	case USB_PORT_FEAT_C_RESET:
+		/* Clear state-change feature */
+		p->change &= ~(1u << (feat - 16));
+		ast_vhub_update_hub_ep1(vhub, port);
+		return std_req_complete;
+	}
+	return std_req_stall;
+}
+
+static enum std_req_rc ast_vhub_get_port_stat(struct ast_vhub_ep *ep,
+					      u8 port)
+{
+	struct ast_vhub *vhub = ep->vhub;
+	u16 stat, chg;
+
+	if (port == 0 || port > vhub->max_ports)
+		return std_req_stall;
+	port--;
+
+	stat = vhub->ports[port].status;
+	chg = vhub->ports[port].change;
+
+	/* We always have power */
+	stat |= USB_PORT_STAT_POWER;
+
+	EPDBG(ep, " port status=%04x change=%04x\n", stat, chg);
+
+	return ast_vhub_simple_reply(ep,
+				     stat & 0xff,
+				     stat >> 8,
+				     chg & 0xff,
+				     chg >> 8);
+}
+
+enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep,
+					   struct usb_ctrlrequest *crq)
+{
+	u16 wValue, wIndex, wLength;
+
+	wValue = le16_to_cpu(crq->wValue);
+	wIndex = le16_to_cpu(crq->wIndex);
+	wLength = le16_to_cpu(crq->wLength);
+
+	switch ((crq->bRequestType << 8) | crq->bRequest) {
+	case GetHubStatus:
+		EPDBG(ep, "GetHubStatus\n");
+		return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
+	case GetPortStatus:
+		EPDBG(ep, "GetPortStatus(%d)\n", wIndex & 0xff);
+		return ast_vhub_get_port_stat(ep, wIndex & 0xf);
+	case GetHubDescriptor:
+		if (wValue != (USB_DT_HUB << 8))
+			return std_req_stall;
+		EPDBG(ep, "GetHubDescriptor(%d)\n", wIndex & 0xff);
+		return ast_vhub_rep_desc(ep, USB_DT_HUB, wLength);
+	case SetHubFeature:
+	case ClearHubFeature:
+		EPDBG(ep, "Get/SetHubFeature(%d)\n", wValue);
+		/* No feature, just complete the requests */
+		if (wValue == C_HUB_LOCAL_POWER ||
+		    wValue == C_HUB_OVER_CURRENT)
+			return std_req_complete;
+		return std_req_stall;
+	case SetPortFeature:
+		EPDBG(ep, "SetPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
+		return ast_vhub_set_port_feature(ep, wIndex & 0xf, wValue);
+	case ClearPortFeature:
+		EPDBG(ep, "ClearPortFeature(%d,%d)\n", wIndex & 0xf, wValue);
+		return ast_vhub_clr_port_feature(ep, wIndex & 0xf, wValue);
+	case ClearTTBuffer:
+	case ResetTT:
+	case StopTT:
+		return std_req_complete;
+	case GetTTState:
+		return ast_vhub_simple_reply(ep, 0, 0, 0, 0);
+	default:
+		EPDBG(ep, "Unknown class request\n");
+	}
+	return std_req_stall;
+}
+
+void ast_vhub_hub_suspend(struct ast_vhub *vhub)
+{
+	unsigned int i;
+
+	UDCDBG(vhub, "USB bus suspend\n");
+
+	if (vhub->suspended)
+		return;
+
+	vhub->suspended = true;
+
+	/*
+	 * Forward to unsuspended ports without changing
+	 * their connection status.
+	 */
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			ast_vhub_dev_suspend(&p->dev);
+	}
+}
+
+void ast_vhub_hub_resume(struct ast_vhub *vhub)
+{
+	unsigned int i;
+
+	UDCDBG(vhub, "USB bus resume\n");
+
+	if (!vhub->suspended)
+		return;
+
+	vhub->suspended = false;
+
+	/*
+	 * Forward to unsuspended ports without changing
+	 * their connection status.
+	 */
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		if (!(p->status & USB_PORT_STAT_SUSPEND))
+			ast_vhub_dev_resume(&p->dev);
+	}
+}
+
+void ast_vhub_hub_reset(struct ast_vhub *vhub)
+{
+	unsigned int i;
+
+	UDCDBG(vhub, "USB bus reset\n");
+
+	/*
+	 * Is the speed known ? If not we don't care, we aren't
+	 * initialized yet and ports haven't been enabled.
+	 */
+	if (vhub->speed == USB_SPEED_UNKNOWN)
+		return;
+
+	/* We aren't suspended anymore obviously */
+	vhub->suspended = false;
+
+	/* No speed set */
+	vhub->speed = USB_SPEED_UNKNOWN;
+
+	/* Wakeup not enabled anymore */
+	vhub->wakeup_en = false;
+
+	/*
+	 * Clear all port status, disable gadgets and "suspend"
+	 * them. They will be woken up by a port reset.
+	 */
+	for (i = 0; i < vhub->max_ports; i++) {
+		struct ast_vhub_port *p = &vhub->ports[i];
+
+		/* Only keep the connected flag */
+		p->status &= USB_PORT_STAT_CONNECTION;
+		p->change = 0;
+
+		/* Suspend the gadget if any */
+		ast_vhub_dev_suspend(&p->dev);
+	}
+
+	/* Cleanup HW */
+	writel(0, vhub->regs + AST_VHUB_CONF);
+	writel(0, vhub->regs + AST_VHUB_EP0_CTRL);
+	writel(VHUB_EP1_CTRL_RESET_TOGGLE |
+	       VHUB_EP1_CTRL_ENABLE,
+	       vhub->regs + AST_VHUB_EP1_CTRL);
+	writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG);
+}
+
+static void ast_vhub_of_parse_dev_desc(struct ast_vhub *vhub,
+				       const struct device_node *vhub_np)
+{
+	u16 id;
+	u32 data;
+
+	if (!of_property_read_u32(vhub_np, "vhub-vendor-id", &data)) {
+		id = (u16)data;
+		vhub->vhub_dev_desc.idVendor = cpu_to_le16(id);
+	}
+	if (!of_property_read_u32(vhub_np, "vhub-product-id", &data)) {
+		id = (u16)data;
+		vhub->vhub_dev_desc.idProduct = cpu_to_le16(id);
+	}
+	if (!of_property_read_u32(vhub_np, "vhub-device-revision", &data)) {
+		id = (u16)data;
+		vhub->vhub_dev_desc.bcdDevice = cpu_to_le16(id);
+	}
+}
+
+static void ast_vhub_fixup_usb1_dev_desc(struct ast_vhub *vhub)
+{
+	vhub->vhub_dev_desc.bcdUSB = cpu_to_le16(0x0100);
+	vhub->vhub_dev_desc.bDeviceProtocol = 0;
+}
+
+static struct usb_gadget_string_container*
+ast_vhub_str_container_alloc(struct ast_vhub *vhub)
+{
+	unsigned int size;
+	struct usb_string *str_array;
+	struct usb_gadget_strings *lang_str;
+	struct usb_gadget_string_container *container;
+
+	size = sizeof(*container);
+	size += sizeof(struct usb_gadget_strings);
+	size += sizeof(struct usb_string) * AST_VHUB_STR_INDEX_MAX;
+	container = devm_kzalloc(&vhub->pdev->dev, size, GFP_KERNEL);
+	if (!container)
+		return ERR_PTR(-ENOMEM);
+
+	lang_str = ast_vhub_str_of_container(container);
+	str_array = (struct usb_string *)(lang_str + 1);
+	lang_str->strings = str_array;
+	return container;
+}
+
+static void ast_vhub_str_deep_copy(struct usb_gadget_strings *dest,
+				   const struct usb_gadget_strings *src)
+{
+	struct usb_string *src_array = src->strings;
+	struct usb_string *dest_array = dest->strings;
+
+	dest->language = src->language;
+	if (src_array && dest_array) {
+		do {
+			*dest_array = *src_array;
+			dest_array++;
+			src_array++;
+		} while (src_array->s);
+	}
+}
+
+static int ast_vhub_str_alloc_add(struct ast_vhub *vhub,
+				  const struct usb_gadget_strings *src_str)
+{
+	struct usb_gadget_strings *dest_str;
+	struct usb_gadget_string_container *container;
+
+	container = ast_vhub_str_container_alloc(vhub);
+	if (IS_ERR(container))
+		return PTR_ERR(container);
+
+	dest_str = ast_vhub_str_of_container(container);
+	ast_vhub_str_deep_copy(dest_str, src_str);
+	list_add_tail(&container->list, &vhub->vhub_str_desc);
+
+	return 0;
+}
+
+static const struct {
+	const char *name;
+	u8 id;
+} str_id_map[] = {
+	{"manufacturer",	AST_VHUB_STR_MANUF},
+	{"product",		AST_VHUB_STR_PRODUCT},
+	{"serial-number",	AST_VHUB_STR_SERIAL},
+	{},
+};
+
+static int ast_vhub_of_parse_str_desc(struct ast_vhub *vhub,
+				      const struct device_node *desc_np)
+{
+	u32 langid;
+	int ret = 0;
+	int i, offset;
+	const char *str;
+	struct device_node *child;
+	struct usb_string str_array[AST_VHUB_STR_INDEX_MAX];
+	struct usb_gadget_strings lang_str = {
+		.strings = (struct usb_string *)str_array,
+	};
+
+	for_each_child_of_node(desc_np, child) {
+		if (of_property_read_u32(child, "reg", &langid))
+			continue; /* no language identifier specified */
+
+		if (!usb_validate_langid(langid))
+			continue; /* invalid language identifier */
+
+		lang_str.language = langid;
+		for (i = offset = 0; str_id_map[i].name; i++) {
+			str = of_get_property(child, str_id_map[i].name, NULL);
+			if (str) {
+				str_array[offset].s = str;
+				str_array[offset].id = str_id_map[i].id;
+				offset++;
+			}
+		}
+		str_array[offset].id = 0;
+		str_array[offset].s = NULL;
+
+		ret = ast_vhub_str_alloc_add(vhub, &lang_str);
+		if (ret) {
+			of_node_put(child);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int ast_vhub_init_desc(struct ast_vhub *vhub)
+{
+	int ret;
+	struct device_node *desc_np;
+	const struct device_node *vhub_np = vhub->pdev->dev.of_node;
+
+	/* Initialize vhub Device Descriptor. */
+	memcpy(&vhub->vhub_dev_desc, &ast_vhub_dev_desc,
+		sizeof(vhub->vhub_dev_desc));
+	ast_vhub_of_parse_dev_desc(vhub, vhub_np);
+	if (vhub->force_usb1)
+		ast_vhub_fixup_usb1_dev_desc(vhub);
+
+	/* Initialize vhub Configuration Descriptor. */
+	memcpy(&vhub->vhub_conf_desc, &ast_vhub_conf_desc,
+		sizeof(vhub->vhub_conf_desc));
+
+	/* Initialize vhub Hub Descriptor. */
+	memcpy(&vhub->vhub_hub_desc, &ast_vhub_hub_desc,
+		sizeof(vhub->vhub_hub_desc));
+	vhub->vhub_hub_desc.bNbrPorts = vhub->max_ports;
+
+	/* Initialize vhub String Descriptors. */
+	INIT_LIST_HEAD(&vhub->vhub_str_desc);
+	desc_np = of_get_child_by_name(vhub_np, "vhub-strings");
+	if (desc_np) {
+		ret = ast_vhub_of_parse_str_desc(vhub, desc_np);
+		of_node_put(desc_np);
+	}
+	else
+		ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings);
+
+	/* Initialize vhub Qualifier Descriptor. */
+	memcpy(&vhub->vhub_qual_desc, &ast_vhub_qual_desc,
+		sizeof(vhub->vhub_qual_desc));
+
+	return ret;
+}
+
+int ast_vhub_init_hub(struct ast_vhub *vhub)
+{
+	vhub->speed = USB_SPEED_UNKNOWN;
+	INIT_WORK(&vhub->wake_work, ast_vhub_wake_work);
+
+	return ast_vhub_init_desc(vhub);
+}