summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/tusb6010.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/musb/tusb6010.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/musb/tusb6010.c')
-rw-r--r--drivers/usb/musb/tusb6010.c1282
1 files changed, 1282 insertions, 0 deletions
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
new file mode 100644
index 000000000..5609b4e84
--- /dev/null
+++ b/drivers/usb/musb/tusb6010.c
@@ -0,0 +1,1282 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TUSB6010 USB 2.0 OTG Dual Role controller
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Notes:
+ * - Driver assumes that interface to external host (main CPU) is
+ * configured for NOR FLASH interface instead of VLYNQ serial
+ * interface.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/prefetch.h>
+#include <linux/usb.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/usb_phy_generic.h>
+
+#include "musb_core.h"
+
+struct tusb6010_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct platform_device *phy;
+};
+
+static void tusb_musb_set_vbus(struct musb *musb, int is_on);
+
+#define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
+#define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
+
+/*
+ * Checks the revision. We need to use the DMA register as 3.0 does not
+ * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
+ */
+static u8 tusb_get_revision(struct musb *musb)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ u32 die_id;
+ u8 rev;
+
+ rev = musb_readl(tbase, TUSB_DMA_CTRL_REV) & 0xff;
+ if (TUSB_REV_MAJOR(rev) == 3) {
+ die_id = TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase,
+ TUSB_DIDR1_HI));
+ if (die_id >= TUSB_DIDR1_HI_REV_31)
+ rev |= 1;
+ }
+
+ return rev;
+}
+
+static void tusb_print_revision(struct musb *musb)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ u8 rev;
+
+ rev = musb->tusb_revision;
+
+ pr_info("tusb: %s%i.%i %s%i.%i %s%i.%i %s%i.%i %s%i %s%i.%i\n",
+ "prcm",
+ TUSB_REV_MAJOR(musb_readl(tbase, TUSB_PRCM_REV)),
+ TUSB_REV_MINOR(musb_readl(tbase, TUSB_PRCM_REV)),
+ "int",
+ TUSB_REV_MAJOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+ TUSB_REV_MINOR(musb_readl(tbase, TUSB_INT_CTRL_REV)),
+ "gpio",
+ TUSB_REV_MAJOR(musb_readl(tbase, TUSB_GPIO_REV)),
+ TUSB_REV_MINOR(musb_readl(tbase, TUSB_GPIO_REV)),
+ "dma",
+ TUSB_REV_MAJOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+ TUSB_REV_MINOR(musb_readl(tbase, TUSB_DMA_CTRL_REV)),
+ "dieid",
+ TUSB_DIDR1_HI_CHIP_REV(musb_readl(tbase, TUSB_DIDR1_HI)),
+ "rev",
+ TUSB_REV_MAJOR(rev), TUSB_REV_MINOR(rev));
+}
+
+#define WBUS_QUIRK_MASK (TUSB_PHY_OTG_CTRL_TESTM2 | TUSB_PHY_OTG_CTRL_TESTM1 \
+ | TUSB_PHY_OTG_CTRL_TESTM0)
+
+/*
+ * Workaround for spontaneous WBUS wake-up issue #2 for tusb3.0.
+ * Disables power detection in PHY for the duration of idle.
+ */
+static void tusb_wbus_quirk(struct musb *musb, int enabled)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ static u32 phy_otg_ctrl, phy_otg_ena;
+ u32 tmp;
+
+ if (enabled) {
+ phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+ phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+ tmp = TUSB_PHY_OTG_CTRL_WRPROTECT
+ | phy_otg_ena | WBUS_QUIRK_MASK;
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+ tmp = phy_otg_ena & ~WBUS_QUIRK_MASK;
+ tmp |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_TESTM2;
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+ dev_dbg(musb->controller, "Enabled tusb wbus quirk ctrl %08x ena %08x\n",
+ musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+ musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+ } else if (musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE)
+ & TUSB_PHY_OTG_CTRL_TESTM2) {
+ tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl;
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL, tmp);
+ tmp = TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena;
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, tmp);
+ dev_dbg(musb->controller, "Disabled tusb wbus quirk ctrl %08x ena %08x\n",
+ musb_readl(tbase, TUSB_PHY_OTG_CTRL),
+ musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE));
+ phy_otg_ctrl = 0;
+ phy_otg_ena = 0;
+ }
+}
+
+static u32 tusb_fifo_offset(u8 epnum)
+{
+ return 0x200 + (epnum * 0x20);
+}
+
+static u32 tusb_ep_offset(u8 epnum, u16 offset)
+{
+ return 0x10 + offset;
+}
+
+/* TUSB mapping: "flat" plus ep0 special cases */
+static void tusb_ep_select(void __iomem *mbase, u8 epnum)
+{
+ musb_writeb(mbase, MUSB_INDEX, epnum);
+}
+
+/*
+ * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
+ */
+static u8 tusb_readb(void __iomem *addr, u32 offset)
+{
+ u16 tmp;
+ u8 val;
+
+ tmp = __raw_readw(addr + (offset & ~1));
+ if (offset & 1)
+ val = (tmp >> 8);
+ else
+ val = tmp & 0xff;
+
+ return val;
+}
+
+static void tusb_writeb(void __iomem *addr, u32 offset, u8 data)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(addr + (offset & ~1));
+ if (offset & 1)
+ tmp = (data << 8) | (tmp & 0xff);
+ else
+ tmp = (tmp & 0xff00) | data;
+
+ __raw_writew(tmp, addr + (offset & ~1));
+}
+
+/*
+ * TUSB 6010 may use a parallel bus that doesn't support byte ops;
+ * so both loading and unloading FIFOs need explicit byte counts.
+ */
+
+static inline void
+tusb_fifo_write_unaligned(void __iomem *fifo, const u8 *buf, u16 len)
+{
+ u32 val;
+ int i;
+
+ if (len > 4) {
+ for (i = 0; i < (len >> 2); i++) {
+ memcpy(&val, buf, 4);
+ musb_writel(fifo, 0, val);
+ buf += 4;
+ }
+ len %= 4;
+ }
+ if (len > 0) {
+ /* Write the rest 1 - 3 bytes to FIFO */
+ val = 0;
+ memcpy(&val, buf, len);
+ musb_writel(fifo, 0, val);
+ }
+}
+
+static inline void tusb_fifo_read_unaligned(void __iomem *fifo,
+ void *buf, u16 len)
+{
+ u32 val;
+ int i;
+
+ if (len > 4) {
+ for (i = 0; i < (len >> 2); i++) {
+ val = musb_readl(fifo, 0);
+ memcpy(buf, &val, 4);
+ buf += 4;
+ }
+ len %= 4;
+ }
+ if (len > 0) {
+ /* Read the rest 1 - 3 bytes from FIFO */
+ val = musb_readl(fifo, 0);
+ memcpy(buf, &val, len);
+ }
+}
+
+static void tusb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf)
+{
+ struct musb *musb = hw_ep->musb;
+ void __iomem *ep_conf = hw_ep->conf;
+ void __iomem *fifo = hw_ep->fifo;
+ u8 epnum = hw_ep->epnum;
+
+ prefetch(buf);
+
+ dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+ 'T', epnum, fifo, len, buf);
+
+ if (epnum)
+ musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
+ TUSB_EP_CONFIG_XFR_SIZE(len));
+ else
+ musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_DIR_TX |
+ TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+ if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+ /* Best case is 32bit-aligned destination address */
+ if ((0x02 & (unsigned long) buf) == 0) {
+ if (len >= 4) {
+ iowrite32_rep(fifo, buf, len >> 2);
+ buf += (len & ~0x03);
+ len &= 0x03;
+ }
+ } else {
+ if (len >= 2) {
+ u32 val;
+ int i;
+
+ /* Cannot use writesw, fifo is 32-bit */
+ for (i = 0; i < (len >> 2); i++) {
+ val = (u32)(*(u16 *)buf);
+ buf += 2;
+ val |= (*(u16 *)buf) << 16;
+ buf += 2;
+ musb_writel(fifo, 0, val);
+ }
+ len &= 0x03;
+ }
+ }
+ }
+
+ if (len > 0)
+ tusb_fifo_write_unaligned(fifo, buf, len);
+}
+
+static void tusb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
+{
+ struct musb *musb = hw_ep->musb;
+ void __iomem *ep_conf = hw_ep->conf;
+ void __iomem *fifo = hw_ep->fifo;
+ u8 epnum = hw_ep->epnum;
+
+ dev_dbg(musb->controller, "%cX ep%d fifo %p count %d buf %p\n",
+ 'R', epnum, fifo, len, buf);
+
+ if (epnum)
+ musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
+ TUSB_EP_CONFIG_XFR_SIZE(len));
+ else
+ musb_writel(ep_conf, 0, TUSB_EP0_CONFIG_XFR_SIZE(len));
+
+ if (likely((0x01 & (unsigned long) buf) == 0)) {
+
+ /* Best case is 32bit-aligned destination address */
+ if ((0x02 & (unsigned long) buf) == 0) {
+ if (len >= 4) {
+ ioread32_rep(fifo, buf, len >> 2);
+ buf += (len & ~0x03);
+ len &= 0x03;
+ }
+ } else {
+ if (len >= 2) {
+ u32 val;
+ int i;
+
+ /* Cannot use readsw, fifo is 32-bit */
+ for (i = 0; i < (len >> 2); i++) {
+ val = musb_readl(fifo, 0);
+ *(u16 *)buf = (u16)(val & 0xffff);
+ buf += 2;
+ *(u16 *)buf = (u16)(val >> 16);
+ buf += 2;
+ }
+ len &= 0x03;
+ }
+ }
+ }
+
+ if (len > 0)
+ tusb_fifo_read_unaligned(fifo, buf, len);
+}
+
+static struct musb *the_musb;
+
+/* This is used by gadget drivers, and OTG transceiver logic, allowing
+ * at most mA current to be drawn from VBUS during a Default-B session
+ * (that is, while VBUS exceeds 4.4V). In Default-A (including pure host
+ * mode), or low power Default-B sessions, something else supplies power.
+ * Caller must take care of locking.
+ */
+static int tusb_draw_power(struct usb_phy *x, unsigned mA)
+{
+ struct musb *musb = the_musb;
+ void __iomem *tbase = musb->ctrl_base;
+ u32 reg;
+
+ /* tps65030 seems to consume max 100mA, with maybe 60mA available
+ * (measured on one board) for things other than tps and tusb.
+ *
+ * Boards sharing the CPU clock with CLKIN will need to prevent
+ * certain idle sleep states while the USB link is active.
+ *
+ * REVISIT we could use VBUS to supply only _one_ of { 1.5V, 3.3V }.
+ * The actual current usage would be very board-specific. For now,
+ * it's simpler to just use an aggregate (also board-specific).
+ */
+ if (x->otg->default_a || mA < (musb->min_power << 1))
+ mA = 0;
+
+ reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+ if (mA) {
+ musb->is_bus_powered = 1;
+ reg |= TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN;
+ } else {
+ musb->is_bus_powered = 0;
+ reg &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+ }
+ musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+ dev_dbg(musb->controller, "draw max %d mA VBUS\n", mA);
+ return 0;
+}
+
+/* workaround for issue 13: change clock during chip idle
+ * (to be fixed in rev3 silicon) ... symptoms include disconnect
+ * or looping suspend/resume cycles
+ */
+static void tusb_set_clock_source(struct musb *musb, unsigned mode)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ u32 reg;
+
+ reg = musb_readl(tbase, TUSB_PRCM_CONF);
+ reg &= ~TUSB_PRCM_CONF_SYS_CLKSEL(0x3);
+
+ /* 0 = refclk (clkin, XI)
+ * 1 = PHY 60 MHz (internal PLL)
+ * 2 = not supported
+ * 3 = what?
+ */
+ if (mode > 0)
+ reg |= TUSB_PRCM_CONF_SYS_CLKSEL(mode & 0x3);
+
+ musb_writel(tbase, TUSB_PRCM_CONF, reg);
+
+ /* FIXME tusb6010_platform_retime(mode == 0); */
+}
+
+/*
+ * Idle TUSB6010 until next wake-up event; NOR access always wakes.
+ * Other code ensures that we idle unless we're connected _and_ the
+ * USB link is not suspended ... and tells us the relevant wakeup
+ * events. SW_EN for voltage is handled separately.
+ */
+static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ u32 reg;
+
+ if ((wakeup_enables & TUSB_PRCM_WBUS)
+ && (musb->tusb_revision == TUSB_REV_30))
+ tusb_wbus_quirk(musb, 1);
+
+ tusb_set_clock_source(musb, 0);
+
+ wakeup_enables |= TUSB_PRCM_WNORCS;
+ musb_writel(tbase, TUSB_PRCM_WAKEUP_MASK, ~wakeup_enables);
+
+ /* REVISIT writeup of WID implies that if WID set and ID is grounded,
+ * TUSB_PHY_OTG_CTRL.TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP must be cleared.
+ * Presumably that's mostly to save power, hence WID is immaterial ...
+ */
+
+ reg = musb_readl(tbase, TUSB_PRCM_MNGMT);
+ /* issue 4: when driving vbus, use hipower (vbus_det) comparator */
+ if (is_host_active(musb)) {
+ reg |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+ reg &= ~TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+ } else {
+ reg |= TUSB_PRCM_MNGMT_OTG_SESS_END_EN;
+ reg &= ~TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+ }
+ reg |= TUSB_PRCM_MNGMT_PM_IDLE | TUSB_PRCM_MNGMT_DEV_IDLE;
+ musb_writel(tbase, TUSB_PRCM_MNGMT, reg);
+
+ dev_dbg(musb->controller, "idle, wake on %02x\n", wakeup_enables);
+}
+
+/*
+ * Updates cable VBUS status. Caller must take care of locking.
+ */
+static int tusb_musb_vbus_status(struct musb *musb)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ u32 otg_stat, prcm_mngmt;
+ int ret = 0;
+
+ otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+ prcm_mngmt = musb_readl(tbase, TUSB_PRCM_MNGMT);
+
+ /* Temporarily enable VBUS detection if it was disabled for
+ * suspend mode. Unless it's enabled otg_stat and devctl will
+ * not show correct VBUS state.
+ */
+ if (!(prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN)) {
+ u32 tmp = prcm_mngmt;
+ tmp |= TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN;
+ musb_writel(tbase, TUSB_PRCM_MNGMT, tmp);
+ otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+ musb_writel(tbase, TUSB_PRCM_MNGMT, prcm_mngmt);
+ }
+
+ if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID)
+ ret = 1;
+
+ return ret;
+}
+
+static void musb_do_idle(struct timer_list *t)
+{
+ struct musb *musb = from_timer(musb, t, dev_timer);
+ unsigned long flags;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_WAIT_BCON:
+ if ((musb->a_wait_bcon != 0)
+ && (musb->idle_timeout == 0
+ || time_after(jiffies, musb->idle_timeout))) {
+ dev_dbg(musb->controller, "Nothing connected %s, turning off VBUS\n",
+ usb_otg_state_string(musb->xceiv->otg->state));
+ }
+ fallthrough;
+ case OTG_STATE_A_IDLE:
+ tusb_musb_set_vbus(musb, 0);
+ break;
+ default:
+ break;
+ }
+
+ if (!musb->is_active) {
+ u32 wakeups;
+
+ /* wait until hub_wq handles port change status */
+ if (is_host_active(musb) && (musb->port1_status >> 16))
+ goto done;
+
+ if (!musb->gadget_driver) {
+ wakeups = 0;
+ } else {
+ wakeups = TUSB_PRCM_WHOSTDISCON
+ | TUSB_PRCM_WBUS
+ | TUSB_PRCM_WVBUS;
+ wakeups |= TUSB_PRCM_WID;
+ }
+ tusb_allow_idle(musb, wakeups);
+ }
+done:
+ spin_unlock_irqrestore(&musb->lock, flags);
+}
+
+/*
+ * Maybe put TUSB6010 into idle mode depending on USB link status,
+ * like "disconnected" or "suspended". We'll be woken out of it by
+ * connect, resume, or disconnect.
+ *
+ * Needs to be called as the last function everywhere where there is
+ * register access to TUSB6010 because of NOR flash wake-up.
+ * Caller should own controller spinlock.
+ *
+ * Delay because peripheral enables D+ pullup 3msec after SE0, and
+ * we don't want to treat that full speed J as a wakeup event.
+ * ... peripherals must draw only suspend current after 10 msec.
+ */
+static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
+{
+ unsigned long default_timeout = jiffies + msecs_to_jiffies(3);
+ static unsigned long last_timer;
+
+ if (timeout == 0)
+ timeout = default_timeout;
+
+ /* Never idle if active, or when VBUS timeout is not set as host */
+ if (musb->is_active || ((musb->a_wait_bcon == 0)
+ && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) {
+ dev_dbg(musb->controller, "%s active, deleting timer\n",
+ usb_otg_state_string(musb->xceiv->otg->state));
+ del_timer(&musb->dev_timer);
+ last_timer = jiffies;
+ return;
+ }
+
+ if (time_after(last_timer, timeout)) {
+ if (!timer_pending(&musb->dev_timer))
+ last_timer = timeout;
+ else {
+ dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
+ return;
+ }
+ }
+ last_timer = timeout;
+
+ dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ (unsigned long)jiffies_to_msecs(timeout - jiffies));
+ mod_timer(&musb->dev_timer, timeout);
+}
+
+/* ticks of 60 MHz clock */
+#define DEVCLOCK 60000000
+#define OTG_TIMER_MS(msecs) ((msecs) \
+ ? (TUSB_DEV_OTG_TIMER_VAL((DEVCLOCK/1000)*(msecs)) \
+ | TUSB_DEV_OTG_TIMER_ENABLE) \
+ : 0)
+
+static void tusb_musb_set_vbus(struct musb *musb, int is_on)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ u32 conf, prcm, timer;
+ u8 devctl;
+ struct usb_otg *otg = musb->xceiv->otg;
+
+ /* HDRC controls CPEN, but beware current surges during device
+ * connect. They can trigger transient overcurrent conditions
+ * that must be ignored.
+ */
+
+ prcm = musb_readl(tbase, TUSB_PRCM_MNGMT);
+ conf = musb_readl(tbase, TUSB_DEV_CONF);
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+ if (is_on) {
+ timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
+ otg->default_a = 1;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ devctl |= MUSB_DEVCTL_SESSION;
+
+ conf |= TUSB_DEV_CONF_USB_HOST_MODE;
+ MUSB_HST_MODE(musb);
+ } else {
+ u32 otg_stat;
+
+ timer = 0;
+
+ /* If ID pin is grounded, we want to be a_idle */
+ otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+ if (!(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS)) {
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_WAIT_VRISE:
+ case OTG_STATE_A_WAIT_BCON:
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ break;
+ default:
+ musb->xceiv->otg->state = OTG_STATE_A_IDLE;
+ }
+ musb->is_active = 0;
+ otg->default_a = 1;
+ MUSB_HST_MODE(musb);
+ } else {
+ musb->is_active = 0;
+ otg->default_a = 0;
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ MUSB_DEV_MODE(musb);
+ }
+
+ devctl &= ~MUSB_DEVCTL_SESSION;
+ conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
+ }
+ prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
+
+ musb_writel(tbase, TUSB_PRCM_MNGMT, prcm);
+ musb_writel(tbase, TUSB_DEV_OTG_TIMER, timer);
+ musb_writel(tbase, TUSB_DEV_CONF, conf);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ dev_dbg(musb->controller, "VBUS %s, devctl %02x otg %3x conf %08x prcm %08x\n",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ musb_readb(musb->mregs, MUSB_DEVCTL),
+ musb_readl(tbase, TUSB_DEV_OTG_STAT),
+ conf, prcm);
+}
+
+/*
+ * Sets the mode to OTG, peripheral or host by changing the ID detection.
+ * Caller must take care of locking.
+ *
+ * Note that if a mini-A cable is plugged in the ID line will stay down as
+ * the weak ID pull-up is not able to pull the ID up.
+ */
+static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ u32 otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
+
+ otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+ phy_otg_ctrl = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+ phy_otg_ena = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+ dev_conf = musb_readl(tbase, TUSB_DEV_CONF);
+
+ switch (musb_mode) {
+
+ case MUSB_HOST: /* Disable PHY ID detect, ground ID */
+ phy_otg_ctrl &= ~TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ dev_conf |= TUSB_DEV_CONF_ID_SEL;
+ dev_conf &= ~TUSB_DEV_CONF_SOFT_ID;
+ break;
+ case MUSB_PERIPHERAL: /* Disable PHY ID detect, keep ID pull-up on */
+ phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ dev_conf |= (TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+ break;
+ case MUSB_OTG: /* Use PHY ID detection */
+ phy_otg_ctrl |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ phy_otg_ena |= TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ dev_conf &= ~(TUSB_DEV_CONF_ID_SEL | TUSB_DEV_CONF_SOFT_ID);
+ break;
+
+ default:
+ dev_dbg(musb->controller, "Trying to set mode %i\n", musb_mode);
+ return -EINVAL;
+ }
+
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL,
+ TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ctrl);
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE,
+ TUSB_PHY_OTG_CTRL_WRPROTECT | phy_otg_ena);
+ musb_writel(tbase, TUSB_DEV_CONF, dev_conf);
+
+ otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+ if ((musb_mode == MUSB_PERIPHERAL) &&
+ !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS))
+ INFO("Cannot be peripheral with mini-A cable "
+ "otg_stat: %08x\n", otg_stat);
+
+ return 0;
+}
+
+static inline unsigned long
+tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
+{
+ u32 otg_stat = musb_readl(tbase, TUSB_DEV_OTG_STAT);
+ unsigned long idle_timeout = 0;
+ struct usb_otg *otg = musb->xceiv->otg;
+
+ /* ID pin */
+ if ((int_src & TUSB_INT_SRC_ID_STATUS_CHNG)) {
+ int default_a;
+
+ default_a = !(otg_stat & TUSB_DEV_OTG_STAT_ID_STATUS);
+ dev_dbg(musb->controller, "Default-%c\n", default_a ? 'A' : 'B');
+ otg->default_a = default_a;
+ tusb_musb_set_vbus(musb, default_a);
+
+ /* Don't allow idling immediately */
+ if (default_a)
+ idle_timeout = jiffies + (HZ * 3);
+ }
+
+ /* VBUS state change */
+ if (int_src & TUSB_INT_SRC_VBUS_SENSE_CHNG) {
+
+ /* B-dev state machine: no vbus ~= disconnect */
+ if (!otg->default_a) {
+ /* ? musb_root_disconnect(musb); */
+ musb->port1_status &=
+ ~(USB_PORT_STAT_CONNECTION
+ | USB_PORT_STAT_ENABLE
+ | USB_PORT_STAT_LOW_SPEED
+ | USB_PORT_STAT_HIGH_SPEED
+ | USB_PORT_STAT_TEST
+ );
+
+ if (otg_stat & TUSB_DEV_OTG_STAT_SESS_END) {
+ dev_dbg(musb->controller, "Forcing disconnect (no interrupt)\n");
+ if (musb->xceiv->otg->state != OTG_STATE_B_IDLE) {
+ /* INTR_DISCONNECT can hide... */
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ musb->int_usb |= MUSB_INTR_DISCONNECT;
+ }
+ musb->is_active = 0;
+ }
+ dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
+ usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
+ idle_timeout = jiffies + (1 * HZ);
+ schedule_delayed_work(&musb->irq_work, 0);
+
+ } else /* A-dev state machine */ {
+ dev_dbg(musb->controller, "vbus change, %s, otg %03x\n",
+ usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
+
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_IDLE:
+ dev_dbg(musb->controller, "Got SRP, turning on VBUS\n");
+ musb_platform_set_vbus(musb, 1);
+
+ /* CONNECT can wake if a_wait_bcon is set */
+ if (musb->a_wait_bcon != 0)
+ musb->is_active = 0;
+ else
+ musb->is_active = 1;
+
+ /*
+ * OPT FS A TD.4.6 needs few seconds for
+ * A_WAIT_VRISE
+ */
+ idle_timeout = jiffies + (2 * HZ);
+
+ break;
+ case OTG_STATE_A_WAIT_VRISE:
+ /* ignore; A-session-valid < VBUS_VALID/2,
+ * we monitor this with the timer
+ */
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ /* REVISIT this irq triggers during short
+ * spikes caused by enumeration ...
+ */
+ if (musb->vbuserr_retry) {
+ musb->vbuserr_retry--;
+ tusb_musb_set_vbus(musb, 1);
+ } else {
+ musb->vbuserr_retry
+ = VBUSERR_RETRY_COUNT;
+ tusb_musb_set_vbus(musb, 0);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ }
+
+ /* OTG timer expiration */
+ if (int_src & TUSB_INT_SRC_OTG_TIMEOUT) {
+ u8 devctl;
+
+ dev_dbg(musb->controller, "%s timer, %03x\n",
+ usb_otg_state_string(musb->xceiv->otg->state), otg_stat);
+
+ switch (musb->xceiv->otg->state) {
+ case OTG_STATE_A_WAIT_VRISE:
+ /* VBUS has probably been valid for a while now,
+ * but may well have bounced out of range a bit
+ */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if (otg_stat & TUSB_DEV_OTG_STAT_VBUS_VALID) {
+ if ((devctl & MUSB_DEVCTL_VBUS)
+ != MUSB_DEVCTL_VBUS) {
+ dev_dbg(musb->controller, "devctl %02x\n", devctl);
+ break;
+ }
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON;
+ musb->is_active = 0;
+ idle_timeout = jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon);
+ } else {
+ /* REVISIT report overcurrent to hub? */
+ ERR("vbus too slow, devctl %02x\n", devctl);
+ tusb_musb_set_vbus(musb, 0);
+ }
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ if (musb->a_wait_bcon != 0)
+ idle_timeout = jiffies
+ + msecs_to_jiffies(musb->a_wait_bcon);
+ break;
+ case OTG_STATE_A_SUSPEND:
+ break;
+ case OTG_STATE_B_WAIT_ACON:
+ break;
+ default:
+ break;
+ }
+ }
+ schedule_delayed_work(&musb->irq_work, 0);
+
+ return idle_timeout;
+}
+
+static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
+{
+ struct musb *musb = __hci;
+ void __iomem *tbase = musb->ctrl_base;
+ unsigned long flags, idle_timeout = 0;
+ u32 int_mask, int_src;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ /* Mask all interrupts to allow using both edge and level GPIO irq */
+ int_mask = musb_readl(tbase, TUSB_INT_MASK);
+ musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+
+ int_src = musb_readl(tbase, TUSB_INT_SRC) & ~TUSB_INT_SRC_RESERVED_BITS;
+ dev_dbg(musb->controller, "TUSB IRQ %08x\n", int_src);
+
+ musb->int_usb = (u8) int_src;
+
+ /* Acknowledge wake-up source interrupts */
+ if (int_src & TUSB_INT_SRC_DEV_WAKEUP) {
+ u32 reg;
+ u32 i;
+
+ if (musb->tusb_revision == TUSB_REV_30)
+ tusb_wbus_quirk(musb, 0);
+
+ /* there are issues re-locking the PLL on wakeup ... */
+
+ /* work around issue 8 */
+ for (i = 0xf7f7f7; i > 0xf7f7f7 - 1000; i--) {
+ musb_writel(tbase, TUSB_SCRATCH_PAD, 0);
+ musb_writel(tbase, TUSB_SCRATCH_PAD, i);
+ reg = musb_readl(tbase, TUSB_SCRATCH_PAD);
+ if (reg == i)
+ break;
+ dev_dbg(musb->controller, "TUSB NOR not ready\n");
+ }
+
+ /* work around issue 13 (2nd half) */
+ tusb_set_clock_source(musb, 1);
+
+ reg = musb_readl(tbase, TUSB_PRCM_WAKEUP_SOURCE);
+ musb_writel(tbase, TUSB_PRCM_WAKEUP_CLEAR, reg);
+ if (reg & ~TUSB_PRCM_WNORCS) {
+ musb->is_active = 1;
+ schedule_delayed_work(&musb->irq_work, 0);
+ }
+ dev_dbg(musb->controller, "wake %sactive %02x\n",
+ musb->is_active ? "" : "in", reg);
+
+ /* REVISIT host side TUSB_PRCM_WHOSTDISCON, TUSB_PRCM_WBUS */
+ }
+
+ if (int_src & TUSB_INT_SRC_USB_IP_CONN)
+ del_timer(&musb->dev_timer);
+
+ /* OTG state change reports (annoyingly) not issued by Mentor core */
+ if (int_src & (TUSB_INT_SRC_VBUS_SENSE_CHNG
+ | TUSB_INT_SRC_OTG_TIMEOUT
+ | TUSB_INT_SRC_ID_STATUS_CHNG))
+ idle_timeout = tusb_otg_ints(musb, int_src, tbase);
+
+ /*
+ * Just clear the DMA interrupt if it comes as the completion for both
+ * TX and RX is handled by the DMA callback in tusb6010_omap
+ */
+ if ((int_src & TUSB_INT_SRC_TXRX_DMA_DONE)) {
+ u32 dma_src = musb_readl(tbase, TUSB_DMA_INT_SRC);
+
+ dev_dbg(musb->controller, "DMA IRQ %08x\n", dma_src);
+ musb_writel(tbase, TUSB_DMA_INT_CLEAR, dma_src);
+ }
+
+ /* EP interrupts. In OCP mode tusb6010 mirrors the MUSB interrupts */
+ if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX)) {
+ u32 musb_src = musb_readl(tbase, TUSB_USBIP_INT_SRC);
+
+ musb_writel(tbase, TUSB_USBIP_INT_CLEAR, musb_src);
+ musb->int_rx = (((musb_src >> 16) & 0xffff) << 1);
+ musb->int_tx = (musb_src & 0xffff);
+ } else {
+ musb->int_rx = 0;
+ musb->int_tx = 0;
+ }
+
+ if (int_src & (TUSB_INT_SRC_USB_IP_TX | TUSB_INT_SRC_USB_IP_RX | 0xff))
+ musb_interrupt(musb);
+
+ /* Acknowledge TUSB interrupts. Clear only non-reserved bits */
+ musb_writel(tbase, TUSB_INT_SRC_CLEAR,
+ int_src & ~TUSB_INT_MASK_RESERVED_BITS);
+
+ tusb_musb_try_idle(musb, idle_timeout);
+
+ musb_writel(tbase, TUSB_INT_MASK, int_mask);
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static int dma_off;
+
+/*
+ * Enables TUSB6010. Caller must take care of locking.
+ * REVISIT:
+ * - Check what is unnecessary in MGC_HdrcStart()
+ */
+static void tusb_musb_enable(struct musb *musb)
+{
+ void __iomem *tbase = musb->ctrl_base;
+
+ /* Setup TUSB6010 main interrupt mask. Enable all interrupts except SOF.
+ * REVISIT: Enable and deal with TUSB_INT_SRC_USB_IP_SOF */
+ musb_writel(tbase, TUSB_INT_MASK, TUSB_INT_SRC_USB_IP_SOF);
+
+ /* Setup TUSB interrupt, disable DMA and GPIO interrupts */
+ musb_writel(tbase, TUSB_USBIP_INT_MASK, 0);
+ musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+ musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+ /* Clear all subsystem interrups */
+ musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
+ musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
+ musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
+
+ /* Acknowledge pending interrupt(s) */
+ musb_writel(tbase, TUSB_INT_SRC_CLEAR, ~TUSB_INT_MASK_RESERVED_BITS);
+
+ /* Only 0 clock cycles for minimum interrupt de-assertion time and
+ * interrupt polarity active low seems to work reliably here */
+ musb_writel(tbase, TUSB_INT_CTRL_CONF,
+ TUSB_INT_CTRL_CONF_INT_RELCYC(0));
+
+ irq_set_irq_type(musb->nIrq, IRQ_TYPE_LEVEL_LOW);
+
+ /* maybe force into the Default-A OTG state machine */
+ if (!(musb_readl(tbase, TUSB_DEV_OTG_STAT)
+ & TUSB_DEV_OTG_STAT_ID_STATUS))
+ musb_writel(tbase, TUSB_INT_SRC_SET,
+ TUSB_INT_SRC_ID_STATUS_CHNG);
+
+ if (is_dma_capable() && dma_off)
+ printk(KERN_WARNING "%s %s: dma not reactivated\n",
+ __FILE__, __func__);
+ else
+ dma_off = 1;
+}
+
+/*
+ * Disables TUSB6010. Caller must take care of locking.
+ */
+static void tusb_musb_disable(struct musb *musb)
+{
+ void __iomem *tbase = musb->ctrl_base;
+
+ /* FIXME stop DMA, IRQs, timers, ... */
+
+ /* disable all IRQs */
+ musb_writel(tbase, TUSB_INT_MASK, ~TUSB_INT_MASK_RESERVED_BITS);
+ musb_writel(tbase, TUSB_USBIP_INT_MASK, 0x7fffffff);
+ musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
+ musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
+
+ del_timer(&musb->dev_timer);
+
+ if (is_dma_capable() && !dma_off) {
+ printk(KERN_WARNING "%s %s: dma still active\n",
+ __FILE__, __func__);
+ dma_off = 1;
+ }
+}
+
+/*
+ * Sets up TUSB6010 CPU interface specific signals and registers
+ * Note: Settings optimized for OMAP24xx
+ */
+static void tusb_setup_cpu_interface(struct musb *musb)
+{
+ void __iomem *tbase = musb->ctrl_base;
+
+ /*
+ * Disable GPIO[5:0] pullups (used as output DMA requests)
+ * Don't disable GPIO[7:6] as they are needed for wake-up.
+ */
+ musb_writel(tbase, TUSB_PULLUP_1_CTRL, 0x0000003F);
+
+ /* Disable all pullups on NOR IF, DMAREQ0 and DMAREQ1 */
+ musb_writel(tbase, TUSB_PULLUP_2_CTRL, 0x01FFFFFF);
+
+ /* Turn GPIO[5:0] to DMAREQ[5:0] signals */
+ musb_writel(tbase, TUSB_GPIO_CONF, TUSB_GPIO_CONF_DMAREQ(0x3f));
+
+ /* Burst size 16x16 bits, all six DMA requests enabled, DMA request
+ * de-assertion time 2 system clocks p 62 */
+ musb_writel(tbase, TUSB_DMA_REQ_CONF,
+ TUSB_DMA_REQ_CONF_BURST_SIZE(2) |
+ TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f) |
+ TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
+
+ /* Set 0 wait count for synchronous burst access */
+ musb_writel(tbase, TUSB_WAIT_COUNT, 1);
+}
+
+static int tusb_musb_start(struct musb *musb)
+{
+ void __iomem *tbase = musb->ctrl_base;
+ int ret = 0;
+ unsigned long flags;
+ u32 reg;
+
+ if (musb->board_set_power)
+ ret = musb->board_set_power(1);
+ if (ret != 0) {
+ printk(KERN_ERR "tusb: Cannot enable TUSB6010\n");
+ return ret;
+ }
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ if (musb_readl(tbase, TUSB_PROD_TEST_RESET) !=
+ TUSB_PROD_TEST_RESET_VAL) {
+ printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
+ goto err;
+ }
+
+ musb->tusb_revision = tusb_get_revision(musb);
+ tusb_print_revision(musb);
+ if (musb->tusb_revision < 2) {
+ printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
+ musb->tusb_revision);
+ goto err;
+ }
+
+ /* The uint bit for "USB non-PDR interrupt enable" has to be 1 when
+ * NOR FLASH interface is used */
+ musb_writel(tbase, TUSB_VLYNQ_CTRL, 8);
+
+ /* Select PHY free running 60MHz as a system clock */
+ tusb_set_clock_source(musb, 1);
+
+ /* VBus valid timer 1us, disable DFT/Debug and VLYNQ clocks for
+ * power saving, enable VBus detect and session end comparators,
+ * enable IDpullup, enable VBus charging */
+ musb_writel(tbase, TUSB_PRCM_MNGMT,
+ TUSB_PRCM_MNGMT_VBUS_VALID_TIMER(0xa) |
+ TUSB_PRCM_MNGMT_VBUS_VALID_FLT_EN |
+ TUSB_PRCM_MNGMT_OTG_SESS_END_EN |
+ TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN |
+ TUSB_PRCM_MNGMT_OTG_ID_PULLUP);
+ tusb_setup_cpu_interface(musb);
+
+ /* simplify: always sense/pullup ID pins, as if in OTG mode */
+ reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL_ENABLE);
+ reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL_ENABLE, reg);
+
+ reg = musb_readl(tbase, TUSB_PHY_OTG_CTRL);
+ reg |= TUSB_PHY_OTG_CTRL_WRPROTECT | TUSB_PHY_OTG_CTRL_OTG_ID_PULLUP;
+ musb_writel(tbase, TUSB_PHY_OTG_CTRL, reg);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return 0;
+
+err:
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ if (musb->board_set_power)
+ musb->board_set_power(0);
+
+ return -ENODEV;
+}
+
+static int tusb_musb_init(struct musb *musb)
+{
+ struct platform_device *pdev;
+ struct resource *mem;
+ void __iomem *sync = NULL;
+ int ret;
+
+ musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(musb->xceiv))
+ return -EPROBE_DEFER;
+
+ pdev = to_platform_device(musb->controller);
+
+ /* dma address for async dma */
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ pr_debug("no async dma resource?\n");
+ ret = -ENODEV;
+ goto done;
+ }
+ musb->async = mem->start;
+
+ /* dma address for sync dma */
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!mem) {
+ pr_debug("no sync dma resource?\n");
+ ret = -ENODEV;
+ goto done;
+ }
+ musb->sync = mem->start;
+
+ sync = ioremap(mem->start, resource_size(mem));
+ if (!sync) {
+ pr_debug("ioremap for sync failed\n");
+ ret = -ENOMEM;
+ goto done;
+ }
+ musb->sync_va = sync;
+
+ /* Offsets from base: VLYNQ at 0x000, MUSB regs at 0x400,
+ * FIFOs at 0x600, TUSB at 0x800
+ */
+ musb->mregs += TUSB_BASE_OFFSET;
+
+ ret = tusb_musb_start(musb);
+ if (ret) {
+ printk(KERN_ERR "Could not start tusb6010 (%d)\n",
+ ret);
+ goto done;
+ }
+ musb->isr = tusb_musb_interrupt;
+
+ musb->xceiv->set_power = tusb_draw_power;
+ the_musb = musb;
+
+ timer_setup(&musb->dev_timer, musb_do_idle, 0);
+
+done:
+ if (ret < 0) {
+ if (sync)
+ iounmap(sync);
+
+ usb_put_phy(musb->xceiv);
+ }
+ return ret;
+}
+
+static int tusb_musb_exit(struct musb *musb)
+{
+ del_timer_sync(&musb->dev_timer);
+ the_musb = NULL;
+
+ if (musb->board_set_power)
+ musb->board_set_power(0);
+
+ iounmap(musb->sync_va);
+
+ usb_put_phy(musb->xceiv);
+ return 0;
+}
+
+static const struct musb_platform_ops tusb_ops = {
+ .quirks = MUSB_DMA_TUSB_OMAP | MUSB_IN_TUSB |
+ MUSB_G_NO_SKB_RESERVE,
+ .init = tusb_musb_init,
+ .exit = tusb_musb_exit,
+
+ .ep_offset = tusb_ep_offset,
+ .ep_select = tusb_ep_select,
+ .fifo_offset = tusb_fifo_offset,
+ .readb = tusb_readb,
+ .writeb = tusb_writeb,
+ .read_fifo = tusb_read_fifo,
+ .write_fifo = tusb_write_fifo,
+#ifdef CONFIG_USB_TUSB_OMAP_DMA
+ .dma_init = tusb_dma_controller_create,
+ .dma_exit = tusb_dma_controller_destroy,
+#endif
+ .enable = tusb_musb_enable,
+ .disable = tusb_musb_disable,
+
+ .set_mode = tusb_musb_set_mode,
+ .try_idle = tusb_musb_try_idle,
+
+ .vbus_status = tusb_musb_vbus_status,
+ .set_vbus = tusb_musb_set_vbus,
+};
+
+static const struct platform_device_info tusb_dev_info = {
+ .name = "musb-hdrc",
+ .id = PLATFORM_DEVID_AUTO,
+ .dma_mask = DMA_BIT_MASK(32),
+};
+
+static int tusb_probe(struct platform_device *pdev)
+{
+ struct resource musb_resources[3];
+ struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct platform_device *musb;
+ struct tusb6010_glue *glue;
+ struct platform_device_info pinfo;
+ int ret;
+
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
+ glue->dev = &pdev->dev;
+
+ pdata->platform_ops = &tusb_ops;
+
+ usb_phy_generic_register();
+ platform_set_drvdata(pdev, glue);
+
+ memset(musb_resources, 0x00, sizeof(*musb_resources) *
+ ARRAY_SIZE(musb_resources));
+
+ musb_resources[0].name = pdev->resource[0].name;
+ musb_resources[0].start = pdev->resource[0].start;
+ musb_resources[0].end = pdev->resource[0].end;
+ musb_resources[0].flags = pdev->resource[0].flags;
+
+ musb_resources[1].name = pdev->resource[1].name;
+ musb_resources[1].start = pdev->resource[1].start;
+ musb_resources[1].end = pdev->resource[1].end;
+ musb_resources[1].flags = pdev->resource[1].flags;
+
+ musb_resources[2].name = pdev->resource[2].name;
+ musb_resources[2].start = pdev->resource[2].start;
+ musb_resources[2].end = pdev->resource[2].end;
+ musb_resources[2].flags = pdev->resource[2].flags;
+
+ pinfo = tusb_dev_info;
+ pinfo.parent = &pdev->dev;
+ pinfo.res = musb_resources;
+ pinfo.num_res = ARRAY_SIZE(musb_resources);
+ pinfo.data = pdata;
+ pinfo.size_data = sizeof(*pdata);
+
+ glue->musb = musb = platform_device_register_full(&pinfo);
+ if (IS_ERR(musb)) {
+ ret = PTR_ERR(musb);
+ dev_err(&pdev->dev, "failed to register musb device: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tusb_remove(struct platform_device *pdev)
+{
+ struct tusb6010_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_unregister(glue->musb);
+ usb_phy_generic_unregister(glue->phy);
+
+ return 0;
+}
+
+static struct platform_driver tusb_driver = {
+ .probe = tusb_probe,
+ .remove = tusb_remove,
+ .driver = {
+ .name = "musb-tusb",
+ },
+};
+
+MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(tusb_driver);