summaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/ux500.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/musb/ux500.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/musb/ux500.c')
-rw-r--r--drivers/usb/musb/ux500.c371
1 files changed, 371 insertions, 0 deletions
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
new file mode 100644
index 000000000..8ea62c344
--- /dev/null
+++ b/drivers/usb/musb/ux500.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * Based on omap2430.c
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb-ux500.h>
+
+#include "musb_core.h"
+
+static const struct musb_hdrc_config ux500_musb_hdrc_config = {
+ .multipoint = true,
+ .dyn_fifo = true,
+ .num_eps = 16,
+ .ram_bits = 16,
+};
+
+struct ux500_glue {
+ struct device *dev;
+ struct platform_device *musb;
+ struct clk *clk;
+};
+#define glue_to_musb(g) platform_get_drvdata(g->musb)
+
+static void ux500_musb_set_vbus(struct musb *musb, int is_on)
+{
+ u8 devctl;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ /* HDRC controls CPEN, but beware current surges during device
+ * connect. They can trigger transient overcurrent conditions
+ * that must be ignored.
+ */
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+ if (is_on) {
+ if (musb->xceiv->otg->state == OTG_STATE_A_IDLE) {
+ /* start the session */
+ devctl |= MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+ /*
+ * Wait for the musb to set as A device to enable the
+ * VBUS
+ */
+ while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(musb->controller,
+ "configured as A device timeout");
+ break;
+ }
+ }
+
+ } else {
+ musb->is_active = 1;
+ musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
+ devctl |= MUSB_DEVCTL_SESSION;
+ MUSB_HST_MODE(musb);
+ }
+ } else {
+ musb->is_active = 0;
+
+ /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping
+ * right to B_IDLE...
+ */
+ devctl &= ~MUSB_DEVCTL_SESSION;
+ MUSB_DEV_MODE(musb);
+ }
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ /*
+ * Devctl values will be updated after vbus goes below
+ * session_valid. The time taken depends on the capacitance
+ * on VBUS line. The max discharge time can be upto 1 sec
+ * as per the spec. Typically on our platform, it is 200ms
+ */
+ if (!is_on)
+ mdelay(200);
+
+ dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+ usb_otg_state_string(musb->xceiv->otg->state),
+ musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
+static int musb_otg_notifications(struct notifier_block *nb,
+ unsigned long event, void *unused)
+{
+ struct musb *musb = container_of(nb, struct musb, nb);
+
+ dev_dbg(musb->controller, "musb_otg_notifications %ld %s\n",
+ event, usb_otg_state_string(musb->xceiv->otg->state));
+
+ switch (event) {
+ case UX500_MUSB_ID:
+ dev_dbg(musb->controller, "ID GND\n");
+ ux500_musb_set_vbus(musb, 1);
+ break;
+ case UX500_MUSB_VBUS:
+ dev_dbg(musb->controller, "VBUS Connect\n");
+ break;
+ case UX500_MUSB_NONE:
+ dev_dbg(musb->controller, "VBUS Disconnect\n");
+ if (is_host_active(musb))
+ ux500_musb_set_vbus(musb, 0);
+ else
+ musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+ break;
+ default:
+ dev_dbg(musb->controller, "ID float\n");
+ return NOTIFY_DONE;
+ }
+ return NOTIFY_OK;
+}
+
+static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
+{
+ unsigned long flags;
+ irqreturn_t retval = IRQ_NONE;
+ struct musb *musb = __hci;
+
+ spin_lock_irqsave(&musb->lock, flags);
+
+ musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
+ musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
+ musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
+
+ if (musb->int_usb || musb->int_tx || musb->int_rx)
+ retval = musb_interrupt(musb);
+
+ spin_unlock_irqrestore(&musb->lock, flags);
+
+ return retval;
+}
+
+static int ux500_musb_init(struct musb *musb)
+{
+ int status;
+
+ musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(musb->xceiv)) {
+ pr_err("HS USB OTG: no transceiver configured\n");
+ return -EPROBE_DEFER;
+ }
+
+ musb->nb.notifier_call = musb_otg_notifications;
+ status = usb_register_notifier(musb->xceiv, &musb->nb);
+ if (status < 0) {
+ dev_dbg(musb->controller, "notification register failed\n");
+ return status;
+ }
+
+ musb->isr = ux500_musb_interrupt;
+
+ return 0;
+}
+
+static int ux500_musb_exit(struct musb *musb)
+{
+ usb_unregister_notifier(musb->xceiv, &musb->nb);
+
+ usb_put_phy(musb->xceiv);
+
+ return 0;
+}
+
+static const struct musb_platform_ops ux500_ops = {
+ .quirks = MUSB_DMA_UX500 | MUSB_INDEXED_EP,
+#ifdef CONFIG_USB_UX500_DMA
+ .dma_init = ux500_dma_controller_create,
+ .dma_exit = ux500_dma_controller_destroy,
+#endif
+ .init = ux500_musb_init,
+ .exit = ux500_musb_exit,
+ .fifo_mode = 5,
+
+ .set_vbus = ux500_musb_set_vbus,
+};
+
+static struct musb_hdrc_platform_data *
+ux500_of_probe(struct platform_device *pdev, struct device_node *np)
+{
+ struct musb_hdrc_platform_data *pdata;
+ const char *mode;
+ int strlen;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ mode = of_get_property(np, "dr_mode", &strlen);
+ if (!mode) {
+ dev_err(&pdev->dev, "No 'dr_mode' property found\n");
+ return NULL;
+ }
+
+ if (strlen > 0) {
+ if (!strcmp(mode, "host"))
+ pdata->mode = MUSB_HOST;
+ if (!strcmp(mode, "otg"))
+ pdata->mode = MUSB_OTG;
+ if (!strcmp(mode, "peripheral"))
+ pdata->mode = MUSB_PERIPHERAL;
+ }
+
+ return pdata;
+}
+
+static int ux500_probe(struct platform_device *pdev)
+{
+ struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+ struct platform_device *musb;
+ struct ux500_glue *glue;
+ struct clk *clk;
+ int ret = -ENOMEM;
+
+ if (!pdata) {
+ if (np) {
+ pdata = ux500_of_probe(pdev, np);
+ if (!pdata)
+ goto err0;
+
+ pdev->dev.platform_data = pdata;
+ } else {
+ dev_err(&pdev->dev, "no pdata or device tree found\n");
+ goto err0;
+ }
+ }
+
+ glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ goto err0;
+
+ musb = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO);
+ if (!musb) {
+ dev_err(&pdev->dev, "failed to allocate musb device\n");
+ goto err0;
+ }
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ ret = PTR_ERR(clk);
+ goto err1;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable clock\n");
+ goto err1;
+ }
+
+ musb->dev.parent = &pdev->dev;
+ musb->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask;
+ device_set_of_node_from_dev(&musb->dev, &pdev->dev);
+
+ glue->dev = &pdev->dev;
+ glue->musb = musb;
+ glue->clk = clk;
+
+ pdata->platform_ops = &ux500_ops;
+ pdata->config = &ux500_musb_hdrc_config;
+
+ platform_set_drvdata(pdev, glue);
+
+ ret = platform_device_add_resources(musb, pdev->resource, pdev->num_resources);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add resources\n");
+ goto err2;
+ }
+
+ ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add platform_data\n");
+ goto err2;
+ }
+
+ ret = platform_device_add(musb);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register musb device\n");
+ goto err2;
+ }
+
+ return 0;
+
+err2:
+ clk_disable_unprepare(clk);
+
+err1:
+ platform_device_put(musb);
+
+err0:
+ return ret;
+}
+
+static int ux500_remove(struct platform_device *pdev)
+{
+ struct ux500_glue *glue = platform_get_drvdata(pdev);
+
+ platform_device_unregister(glue->musb);
+ clk_disable_unprepare(glue->clk);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ux500_suspend(struct device *dev)
+{
+ struct ux500_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+
+ if (musb)
+ usb_phy_set_suspend(musb->xceiv, 1);
+
+ clk_disable_unprepare(glue->clk);
+
+ return 0;
+}
+
+static int ux500_resume(struct device *dev)
+{
+ struct ux500_glue *glue = dev_get_drvdata(dev);
+ struct musb *musb = glue_to_musb(glue);
+ int ret;
+
+ ret = clk_prepare_enable(glue->clk);
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
+
+ if (musb)
+ usb_phy_set_suspend(musb->xceiv, 0);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ux500_pm_ops, ux500_suspend, ux500_resume);
+
+static const struct of_device_id ux500_match[] = {
+ { .compatible = "stericsson,db8500-musb", },
+ {}
+};
+
+MODULE_DEVICE_TABLE(of, ux500_match);
+
+static struct platform_driver ux500_driver = {
+ .probe = ux500_probe,
+ .remove = ux500_remove,
+ .driver = {
+ .name = "musb-ux500",
+ .pm = &ux500_pm_ops,
+ .of_match_table = ux500_match,
+ },
+};
+
+MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
+MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
+MODULE_LICENSE("GPL v2");
+module_platform_driver(ux500_driver);