Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 368 insertions, 0 deletions

diff --git a/sound/soc/intel/skylake/skl-sst-cldma.c b/sound/soc/intel/skylake/skl-sst-cldma.c
new file mode 100644
index 000000000..b91f7a652
--- /dev/null
+++ b/sound/soc/intel/skylake/skl-sst-cldma.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * skl-sst-cldma.c - Code Loader DMA handler
+ *
+ * Copyright (C) 2015, Intel Corporation.
+ * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include "../common/sst-dsp.h"
+#include "../common/sst-dsp-priv.h"
+
+static void skl_cldma_int_enable(struct sst_dsp *ctx)
+{
+	sst_dsp_shim_update_bits_unlocked(ctx, SKL_ADSP_REG_ADSPIC,
+				SKL_ADSPIC_CL_DMA, SKL_ADSPIC_CL_DMA);
+}
+
+void skl_cldma_int_disable(struct sst_dsp *ctx)
+{
+	sst_dsp_shim_update_bits_unlocked(ctx,
+			SKL_ADSP_REG_ADSPIC, SKL_ADSPIC_CL_DMA, 0);
+}
+
+static void skl_cldma_stream_run(struct sst_dsp  *ctx, bool enable)
+{
+	unsigned char val;
+	int timeout;
+
+	sst_dsp_shim_update_bits_unlocked(ctx,
+			SKL_ADSP_REG_CL_SD_CTL,
+			CL_SD_CTL_RUN_MASK, CL_SD_CTL_RUN(enable));
+
+	udelay(3);
+	timeout = 300;
+	do {
+		/* waiting for hardware to report that the stream Run bit set */
+		val = sst_dsp_shim_read(ctx, SKL_ADSP_REG_CL_SD_CTL) &
+			CL_SD_CTL_RUN_MASK;
+		if (enable && val)
+			break;
+		else if (!enable && !val)
+			break;
+		udelay(3);
+	} while (--timeout);
+
+	if (timeout == 0)
+		dev_err(ctx->dev, "Failed to set Run bit=%d enable=%d\n", val, enable);
+}
+
+static void skl_cldma_stream_clear(struct sst_dsp  *ctx)
+{
+	/* make sure Run bit is cleared before setting stream register */
+	skl_cldma_stream_run(ctx, 0);
+
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(0));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+				CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(0));
+
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL, CL_SD_BDLPLBA(0));
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU, 0);
+
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, 0);
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, 0);
+}
+
+/* Code loader helper APIs */
+static void skl_cldma_setup_bdle(struct sst_dsp *ctx,
+		struct snd_dma_buffer *dmab_data,
+		__le32 **bdlp, int size, int with_ioc)
+{
+	__le32 *bdl = *bdlp;
+
+	ctx->cl_dev.frags = 0;
+	while (size > 0) {
+		phys_addr_t addr = virt_to_phys(dmab_data->area +
+				(ctx->cl_dev.frags * ctx->cl_dev.bufsize));
+
+		bdl[0] = cpu_to_le32(lower_32_bits(addr));
+		bdl[1] = cpu_to_le32(upper_32_bits(addr));
+
+		bdl[2] = cpu_to_le32(ctx->cl_dev.bufsize);
+
+		size -= ctx->cl_dev.bufsize;
+		bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01);
+
+		bdl += 4;
+		ctx->cl_dev.frags++;
+	}
+}
+
+/*
+ * Setup controller
+ * Configure the registers to update the dma buffer address and
+ * enable interrupts.
+ * Note: Using the channel 1 for transfer
+ */
+static void skl_cldma_setup_controller(struct sst_dsp  *ctx,
+		struct snd_dma_buffer *dmab_bdl, unsigned int max_size,
+		u32 count)
+{
+	skl_cldma_stream_clear(ctx);
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPL,
+			CL_SD_BDLPLBA(dmab_bdl->addr));
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_BDLPU,
+			CL_SD_BDLPUBA(dmab_bdl->addr));
+
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_CBL, max_size);
+	sst_dsp_shim_write(ctx, SKL_ADSP_REG_CL_SD_LVI, count - 1);
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+			CL_SD_CTL_IOCE_MASK, CL_SD_CTL_IOCE(1));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+			CL_SD_CTL_FEIE_MASK, CL_SD_CTL_FEIE(1));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+			CL_SD_CTL_DEIE_MASK, CL_SD_CTL_DEIE(1));
+	sst_dsp_shim_update_bits(ctx, SKL_ADSP_REG_CL_SD_CTL,
+			CL_SD_CTL_STRM_MASK, CL_SD_CTL_STRM(FW_CL_STREAM_NUMBER));
+}
+
+static void skl_cldma_setup_spb(struct sst_dsp  *ctx,
+		unsigned int size, bool enable)
+{
+	if (enable)
+		sst_dsp_shim_update_bits_unlocked(ctx,
+				SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
+				CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
+				CL_SPBFIFO_SPBFCCTL_SPIBE(1));
+
+	sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, size);
+}
+
+static void skl_cldma_cleanup_spb(struct sst_dsp  *ctx)
+{
+	sst_dsp_shim_update_bits_unlocked(ctx,
+			SKL_ADSP_REG_CL_SPBFIFO_SPBFCCTL,
+			CL_SPBFIFO_SPBFCCTL_SPIBE_MASK,
+			CL_SPBFIFO_SPBFCCTL_SPIBE(0));
+
+	sst_dsp_shim_write_unlocked(ctx, SKL_ADSP_REG_CL_SPBFIFO_SPIB, 0);
+}
+
+static void skl_cldma_cleanup(struct sst_dsp  *ctx)
+{
+	skl_cldma_cleanup_spb(ctx);
+	skl_cldma_stream_clear(ctx);
+
+	ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
+	ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_bdl);
+}
+
+int skl_cldma_wait_interruptible(struct sst_dsp *ctx)
+{
+	int ret = 0;
+
+	if (!wait_event_timeout(ctx->cl_dev.wait_queue,
+				ctx->cl_dev.wait_condition,
+				msecs_to_jiffies(SKL_WAIT_TIMEOUT))) {
+		dev_err(ctx->dev, "%s: Wait timeout\n", __func__);
+		ret = -EIO;
+		goto cleanup;
+	}
+
+	dev_dbg(ctx->dev, "%s: Event wake\n", __func__);
+	if (ctx->cl_dev.wake_status != SKL_CL_DMA_BUF_COMPLETE) {
+		dev_err(ctx->dev, "%s: DMA Error\n", __func__);
+		ret = -EIO;
+	}
+
+cleanup:
+	ctx->cl_dev.wake_status = SKL_CL_DMA_STATUS_NONE;
+	return ret;
+}
+
+static void skl_cldma_stop(struct sst_dsp *ctx)
+{
+	skl_cldma_stream_run(ctx, false);
+}
+
+static void skl_cldma_fill_buffer(struct sst_dsp *ctx, unsigned int size,
+		const void *curr_pos, bool intr_enable, bool trigger)
+{
+	dev_dbg(ctx->dev, "Size: %x, intr_enable: %d\n", size, intr_enable);
+	dev_dbg(ctx->dev, "buf_pos_index:%d, trigger:%d\n",
+			ctx->cl_dev.dma_buffer_offset, trigger);
+	dev_dbg(ctx->dev, "spib position: %d\n", ctx->cl_dev.curr_spib_pos);
+
+	/*
+	 * Check if the size exceeds buffer boundary. If it exceeds
+	 * max_buffer size, then copy till buffer size and then copy
+	 * remaining buffer from the start of ring buffer.
+	 */
+	if (ctx->cl_dev.dma_buffer_offset + size > ctx->cl_dev.bufsize) {
+		unsigned int size_b = ctx->cl_dev.bufsize -
+					ctx->cl_dev.dma_buffer_offset;
+		memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
+			curr_pos, size_b);
+		size -= size_b;
+		curr_pos += size_b;
+		ctx->cl_dev.dma_buffer_offset = 0;
+	}
+
+	memcpy(ctx->cl_dev.dmab_data.area + ctx->cl_dev.dma_buffer_offset,
+			curr_pos, size);
+
+	if (ctx->cl_dev.curr_spib_pos == ctx->cl_dev.bufsize)
+		ctx->cl_dev.dma_buffer_offset = 0;
+	else
+		ctx->cl_dev.dma_buffer_offset = ctx->cl_dev.curr_spib_pos;
+
+	ctx->cl_dev.wait_condition = false;
+
+	if (intr_enable)
+		skl_cldma_int_enable(ctx);
+
+	ctx->cl_dev.ops.cl_setup_spb(ctx, ctx->cl_dev.curr_spib_pos, trigger);
+	if (trigger)
+		ctx->cl_dev.ops.cl_trigger(ctx, true);
+}
+
+/*
+ * The CL dma doesn't have any way to update the transfer status until a BDL
+ * buffer is fully transferred
+ *
+ * So Copying is divided in two parts.
+ * 1. Interrupt on buffer done where the size to be transferred is more than
+ *    ring buffer size.
+ * 2. Polling on fw register to identify if data left to transferred doesn't
+ *    fill the ring buffer. Caller takes care of polling the required status
+ *    register to identify the transfer status.
+ * 3. if wait flag is set, waits for DBL interrupt to copy the next chunk till
+ *    bytes_left is 0.
+ *    if wait flag is not set, doesn't wait for BDL interrupt. after ccopying
+ *    the first chunk return the no of bytes_left to be copied.
+ */
+static int
+skl_cldma_copy_to_buf(struct sst_dsp *ctx, const void *bin,
+			u32 total_size, bool wait)
+{
+	int ret;
+	bool start = true;
+	unsigned int excess_bytes;
+	u32 size;
+	unsigned int bytes_left = total_size;
+	const void *curr_pos = bin;
+
+	if (total_size <= 0)
+		return -EINVAL;
+
+	dev_dbg(ctx->dev, "%s: Total binary size: %u\n", __func__, bytes_left);
+
+	while (bytes_left) {
+		if (bytes_left > ctx->cl_dev.bufsize) {
+
+			/*
+			 * dma transfers only till the write pointer as
+			 * updated in spib
+			 */
+			if (ctx->cl_dev.curr_spib_pos == 0)
+				ctx->cl_dev.curr_spib_pos = ctx->cl_dev.bufsize;
+
+			size = ctx->cl_dev.bufsize;
+			skl_cldma_fill_buffer(ctx, size, curr_pos, true, start);
+
+			if (wait) {
+				start = false;
+				ret = skl_cldma_wait_interruptible(ctx);
+				if (ret < 0) {
+					skl_cldma_stop(ctx);
+					return ret;
+				}
+			}
+		} else {
+			skl_cldma_int_disable(ctx);
+
+			if ((ctx->cl_dev.curr_spib_pos + bytes_left)
+							<= ctx->cl_dev.bufsize) {
+				ctx->cl_dev.curr_spib_pos += bytes_left;
+			} else {
+				excess_bytes = bytes_left -
+					(ctx->cl_dev.bufsize -
+					ctx->cl_dev.curr_spib_pos);
+				ctx->cl_dev.curr_spib_pos = excess_bytes;
+			}
+
+			size = bytes_left;
+			skl_cldma_fill_buffer(ctx, size,
+					curr_pos, false, start);
+		}
+		bytes_left -= size;
+		curr_pos = curr_pos + size;
+		if (!wait)
+			return bytes_left;
+	}
+
+	return bytes_left;
+}
+
+void skl_cldma_process_intr(struct sst_dsp *ctx)
+{
+	u8 cl_dma_intr_status;
+
+	cl_dma_intr_status =
+		sst_dsp_shim_read_unlocked(ctx, SKL_ADSP_REG_CL_SD_STS);
+
+	if (!(cl_dma_intr_status & SKL_CL_DMA_SD_INT_COMPLETE))
+		ctx->cl_dev.wake_status = SKL_CL_DMA_ERR;
+	else
+		ctx->cl_dev.wake_status = SKL_CL_DMA_BUF_COMPLETE;
+
+	ctx->cl_dev.wait_condition = true;
+	wake_up(&ctx->cl_dev.wait_queue);
+}
+
+int skl_cldma_prepare(struct sst_dsp *ctx)
+{
+	int ret;
+	__le32 *bdl;
+
+	ctx->cl_dev.bufsize = SKL_MAX_BUFFER_SIZE;
+
+	/* Allocate cl ops */
+	ctx->cl_dev.ops.cl_setup_bdle = skl_cldma_setup_bdle;
+	ctx->cl_dev.ops.cl_setup_controller = skl_cldma_setup_controller;
+	ctx->cl_dev.ops.cl_setup_spb = skl_cldma_setup_spb;
+	ctx->cl_dev.ops.cl_cleanup_spb = skl_cldma_cleanup_spb;
+	ctx->cl_dev.ops.cl_trigger = skl_cldma_stream_run;
+	ctx->cl_dev.ops.cl_cleanup_controller = skl_cldma_cleanup;
+	ctx->cl_dev.ops.cl_copy_to_dmabuf = skl_cldma_copy_to_buf;
+	ctx->cl_dev.ops.cl_stop_dma = skl_cldma_stop;
+
+	/* Allocate buffer*/
+	ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
+			&ctx->cl_dev.dmab_data, ctx->cl_dev.bufsize);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Alloc buffer for base fw failed: %x\n", ret);
+		return ret;
+	}
+	/* Setup Code loader BDL */
+	ret = ctx->dsp_ops.alloc_dma_buf(ctx->dev,
+			&ctx->cl_dev.dmab_bdl, PAGE_SIZE);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Alloc buffer for blde failed: %x\n", ret);
+		ctx->dsp_ops.free_dma_buf(ctx->dev, &ctx->cl_dev.dmab_data);
+		return ret;
+	}
+	bdl = (__le32 *)ctx->cl_dev.dmab_bdl.area;
+
+	/* Allocate BDLs */
+	ctx->cl_dev.ops.cl_setup_bdle(ctx, &ctx->cl_dev.dmab_data,
+			&bdl, ctx->cl_dev.bufsize, 1);
+	ctx->cl_dev.ops.cl_setup_controller(ctx, &ctx->cl_dev.dmab_bdl,
+			ctx->cl_dev.bufsize, ctx->cl_dev.frags);
+
+	ctx->cl_dev.curr_spib_pos = 0;
+	ctx->cl_dev.dma_buffer_offset = 0;
+	init_waitqueue_head(&ctx->cl_dev.wait_queue);
+
+	return ret;
+}