Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 201 insertions, 0 deletions

diff --git a/sound/soc/pxa/mioa701_wm9713.c b/sound/soc/pxa/mioa701_wm9713.c
new file mode 100644
index 000000000..0fa37637e
--- /dev/null
+++ b/sound/soc/pxa/mioa701_wm9713.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Handles the Mitac mioa701 SoC system
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This is a little schema of the sound interconnections :
+ *
+ *    Sagem X200                 Wolfson WM9713
+ *    +--------+             +-------------------+      Rear Speaker
+ *    |        |             |                   |           /-+
+ *    |        +--->----->---+MONOIN         SPKL+--->----+-+  |
+ *    |  GSM   |             |                   |        | |  |
+ *    |        +--->----->---+PCBEEP         SPKR+--->----+-+  |
+ *    |  CHIP  |             |                   |           \-+
+ *    |        +---<-----<---+MONO               |
+ *    |        |             |                   |      Front Speaker
+ *    +--------+             |                   |           /-+
+ *                           |                HPL+--->----+-+  |
+ *                           |                   |        | |  |
+ *                           |               OUT3+--->----+-+  |
+ *                           |                   |           \-+
+ *                           |                   |
+ *                           |                   |     Front Micro
+ *                           |                   |         +
+ *                           |               MIC1+-----<--+o+
+ *                           |                   |         +
+ *                           +-------------------+        ---
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <linux/platform_data/asoc-pxa.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/ac97_codec.h>
+
+#include "../codecs/wm9713.h"
+
+#define AC97_GPIO_PULL		0x58
+
+/* Use GPIO8 for rear speaker amplifier */
+static int rear_amp_power(struct snd_soc_component *component, int power)
+{
+	unsigned short reg;
+
+	if (power) {
+		reg = snd_soc_component_read(component, AC97_GPIO_CFG);
+		snd_soc_component_write(component, AC97_GPIO_CFG, reg | 0x0100);
+		reg = snd_soc_component_read(component, AC97_GPIO_PULL);
+		snd_soc_component_write(component, AC97_GPIO_PULL, reg | (1<<15));
+	} else {
+		reg = snd_soc_component_read(component, AC97_GPIO_CFG);
+		snd_soc_component_write(component, AC97_GPIO_CFG, reg & ~0x0100);
+		reg = snd_soc_component_read(component, AC97_GPIO_PULL);
+		snd_soc_component_write(component, AC97_GPIO_PULL, reg & ~(1<<15));
+	}
+
+	return 0;
+}
+
+static int rear_amp_event(struct snd_soc_dapm_widget *widget,
+			  struct snd_kcontrol *kctl, int event)
+{
+	struct snd_soc_card *card = widget->dapm->card;
+	struct snd_soc_pcm_runtime *rtd;
+	struct snd_soc_component *component;
+
+	rtd = snd_soc_get_pcm_runtime(card, &card->dai_link[0]);
+	component = asoc_rtd_to_codec(rtd, 0)->component;
+	return rear_amp_power(component, SND_SOC_DAPM_EVENT_ON(event));
+}
+
+/* mioa701 machine dapm widgets */
+static const struct snd_soc_dapm_widget mioa701_dapm_widgets[] = {
+	SND_SOC_DAPM_SPK("Front Speaker", NULL),
+	SND_SOC_DAPM_SPK("Rear Speaker", rear_amp_event),
+	SND_SOC_DAPM_MIC("Headset", NULL),
+	SND_SOC_DAPM_LINE("GSM Line Out", NULL),
+	SND_SOC_DAPM_LINE("GSM Line In", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Front Mic", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+	/* Call Mic */
+	{"Mic Bias", NULL, "Front Mic"},
+	{"MIC1", NULL, "Mic Bias"},
+
+	/* Headset Mic */
+	{"LINEL", NULL, "Headset Mic"},
+	{"LINER", NULL, "Headset Mic"},
+
+	/* GSM Module */
+	{"MONOIN", NULL, "GSM Line Out"},
+	{"PCBEEP", NULL, "GSM Line Out"},
+	{"GSM Line In", NULL, "MONO"},
+
+	/* headphone connected to HPL, HPR */
+	{"Headset", NULL, "HPL"},
+	{"Headset", NULL, "HPR"},
+
+	/* front speaker connected to HPL, OUT3 */
+	{"Front Speaker", NULL, "HPL"},
+	{"Front Speaker", NULL, "OUT3"},
+
+	/* rear speaker connected to SPKL, SPKR */
+	{"Rear Speaker", NULL, "SPKL"},
+	{"Rear Speaker", NULL, "SPKR"},
+};
+
+static int mioa701_wm9713_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_component *component = asoc_rtd_to_codec(rtd, 0)->component;
+
+	/* Prepare GPIO8 for rear speaker amplifier */
+	snd_soc_component_update_bits(component, AC97_GPIO_CFG, 0x100, 0x100);
+
+	/* Prepare MIC input */
+	snd_soc_component_update_bits(component, AC97_3D_CONTROL, 0xc000, 0xc000);
+
+	return 0;
+}
+
+static struct snd_soc_ops mioa701_ops;
+
+SND_SOC_DAILINK_DEFS(ac97,
+	DAILINK_COMP_ARRAY(COMP_CPU("pxa2xx-ac97")),
+	DAILINK_COMP_ARRAY(COMP_CODEC("wm9713-codec", "wm9713-hifi")),
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("pxa-pcm-audio")));
+
+SND_SOC_DAILINK_DEFS(ac97_aux,
+	DAILINK_COMP_ARRAY(COMP_CPU("pxa2xx-ac97-aux")),
+	DAILINK_COMP_ARRAY(COMP_CODEC("wm9713-codec", "wm9713-aux")),
+	DAILINK_COMP_ARRAY(COMP_PLATFORM("pxa-pcm-audio")));
+
+static struct snd_soc_dai_link mioa701_dai[] = {
+	{
+		.name = "AC97",
+		.stream_name = "AC97 HiFi",
+		.init = mioa701_wm9713_init,
+		.ops = &mioa701_ops,
+		SND_SOC_DAILINK_REG(ac97),
+	},
+	{
+		.name = "AC97 Aux",
+		.stream_name = "AC97 Aux",
+		.ops = &mioa701_ops,
+		SND_SOC_DAILINK_REG(ac97_aux),
+	},
+};
+
+static struct snd_soc_card mioa701 = {
+	.name = "MioA701",
+	.owner = THIS_MODULE,
+	.dai_link = mioa701_dai,
+	.num_links = ARRAY_SIZE(mioa701_dai),
+
+	.dapm_widgets = mioa701_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(mioa701_dapm_widgets),
+	.dapm_routes = audio_map,
+	.num_dapm_routes = ARRAY_SIZE(audio_map),
+};
+
+static int mioa701_wm9713_probe(struct platform_device *pdev)
+{
+	int rc;
+
+	if (!machine_is_mioa701())
+		return -ENODEV;
+
+	mioa701.dev = &pdev->dev;
+	rc = devm_snd_soc_register_card(&pdev->dev, &mioa701);
+	if (!rc)
+		dev_warn(&pdev->dev, "Be warned that incorrect mixers/muxes setup will "
+			 "lead to overheating and possible destruction of your device."
+			 " Do not use without a good knowledge of mio's board design!\n");
+	return rc;
+}
+
+static struct platform_driver mioa701_wm9713_driver = {
+	.probe		= mioa701_wm9713_probe,
+	.driver		= {
+		.name		= "mioa701-wm9713",
+		.pm     = &snd_soc_pm_ops,
+	},
+};
+
+module_platform_driver(mioa701_wm9713_driver);
+
+/* Module information */
+MODULE_AUTHOR("Robert Jarzmik (rjarzmik@free.fr)");
+MODULE_DESCRIPTION("ALSA SoC WM9713 MIO A701");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mioa701-wm9713");