Adding upstream version 6.1.76.upstream/6.1.76

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 1851 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/devlink_trap_tunnel_ipip6.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/devlink_trap_tunnel_ipip6.sh
new file mode 100755
index 000000000..f62ce479c
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/devlink_trap_tunnel_ipip6.sh
@@ -0,0 +1,250 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test devlink-trap tunnel exceptions functionality over mlxsw.
+# Check all exception traps to make sure they are triggered under the right
+# conditions.
+
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |  2001:db8:1::1/64 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|-----+
+# | SW1               |     |
+# |             $swp1 +     |
+# |  2001:db8:1::2/64       |
+# |                         |
+# |  + g1 (ip6gre)          |
+# |    loc=2001:db8:3::1    |
+# |    rem=2001:db8:3::2    |
+# |    tos=inherit          |
+# |                         |
+# |  + $rp1                 |
+# |  | 2001:db8:10::1/64    |
+# +--|----------------------+
+#    |
+# +--|----------------------+
+# |  |                 VRF2 |
+# |  + $rp2                 |
+# |    2001:db8:10::2/64    |
+# +-------------------------+
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+ALL_TESTS="
+	decap_error_test
+"
+
+NUM_NETIFS=4
+source $lib_dir/lib.sh
+source $lib_dir/tc_common.sh
+source $lib_dir/devlink_lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 2001:db8:1::1/64
+}
+
+vrf2_create()
+{
+	simple_if_init $rp2 2001:db8:10::2/64
+}
+
+vrf2_destroy()
+{
+	simple_if_fini $rp2 2001:db8:10::2/64
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	__addr_add_del $swp1 add 2001:db8:1::2/64
+	tc qdisc add dev $swp1 clsact
+
+	tunnel_create g1 ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \
+		ttl inherit
+	ip link set dev g1 up
+	__addr_add_del g1 add 2001:db8:3::1/128
+
+	ip link set dev $rp1 up
+	__addr_add_del $rp1 add 2001:db8:10::1/64
+}
+
+switch_destroy()
+{
+	__addr_add_del $rp1 del 2001:db8:10::1/64
+	ip link set dev $rp1 down
+
+	__addr_add_del g1 del 2001:db8:3::1/128
+	ip link set dev g1 down
+	tunnel_destroy g1
+
+	tc qdisc del dev $swp1 clsact
+	__addr_add_del $swp1 del 2001:db8:1::2/64
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	rp1=${NETIFS[p3]}
+	rp2=${NETIFS[p4]}
+
+	forwarding_enable
+	vrf_prepare
+	h1_create
+	switch_create
+	vrf2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	vrf2_destroy
+	switch_destroy
+	h1_destroy
+	vrf_cleanup
+	forwarding_restore
+}
+
+ipip_payload_get()
+{
+	local saddr="20:01:0d:b8:00:02:00:00:00:00:00:00:00:00:00:01"
+	local daddr="20:01:0d:b8:00:01:00:00:00:00:00:00:00:00:00:01"
+	local flags=$1; shift
+	local key=$1; shift
+
+	p=$(:
+		)"$flags"$(		      : GRE flags
+	        )"0:00:"$(                    : Reserved + version
+		)"86:dd:"$(		      : ETH protocol type
+		)"$key"$( 		      : Key
+		)"6"$(	                      : IP version
+		)"0:0"$(		      : Traffic class
+		)"0:00:00:"$(		      : Flow label
+		)"00:00:"$(                   : Payload length
+		)"3a:"$(                      : Next header
+		)"04:"$(                      : Hop limit
+		)"$saddr:"$(                  : IP saddr
+		)"$daddr:"$(                  : IP daddr
+		)
+	echo $p
+}
+
+ecn_payload_get()
+{
+	echo $(ipip_payload_get "0")
+}
+
+ecn_decap_test()
+{
+	local trap_name="decap_error"
+	local desc=$1; shift
+	local ecn_desc=$1; shift
+	local outer_tos=$1; shift
+	local mz_pid
+
+	RET=0
+
+	tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \
+		flower src_ip 2001:db8:2::1 dst_ip 2001:db8:1::1 skip_sw \
+		action pass
+
+	rp1_mac=$(mac_get $rp1)
+	rp2_mac=$(mac_get $rp2)
+	payload=$(ecn_payload_get)
+
+	ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \
+		-A 2001:db8:3::2 -B 2001:db8:3::1 -t ip \
+			tos=$outer_tos,next=47,p=$payload -q &
+	mz_pid=$!
+
+	devlink_trap_exception_test $trap_name
+
+	tc_check_packets "dev $swp1 egress" 101 0
+	check_err $? "Packets were not dropped"
+
+	log_test "$desc: Inner ECN is not ECT and outer is $ecn_desc"
+
+	kill $mz_pid && wait $mz_pid &> /dev/null
+	tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower
+}
+
+no_matching_tunnel_test()
+{
+	local trap_name="decap_error"
+	local desc=$1; shift
+	local sip=$1; shift
+	local mz_pid
+
+	RET=0
+
+	tc filter add dev $swp1 egress protocol ipv6 pref 1 handle 101 \
+		flower src_ip 2001:db8:2::1 dst_ip 2001:db8:1::1 action pass
+
+	rp1_mac=$(mac_get $rp1)
+	rp2_mac=$(mac_get $rp2)
+	payload=$(ipip_payload_get "$@")
+
+	ip vrf exec v$rp2 $MZ -6 $rp2 -c 0 -d 1msec -a $rp2_mac -b $rp1_mac \
+		-A $sip -B 2001:db8:3::1 -t ip next=47,p=$payload -q &
+	mz_pid=$!
+
+	devlink_trap_exception_test $trap_name
+
+	tc_check_packets "dev $swp1 egress" 101 0
+	check_err $? "Packets were not dropped"
+
+	log_test "$desc"
+
+	kill $mz_pid && wait $mz_pid &> /dev/null
+	tc filter del dev $swp1 egress protocol ipv6 pref 1 handle 101 flower
+}
+
+decap_error_test()
+{
+	# Correct source IP - the remote address
+	local sip=2001:db8:3::2
+
+	ecn_decap_test "Decap error" "ECT(1)" 01
+	ecn_decap_test "Decap error" "ECT(0)" 02
+	ecn_decap_test "Decap error" "CE" 03
+
+	no_matching_tunnel_test "Decap error: Source IP check failed" \
+		2001:db8:4::2 "0"
+	no_matching_tunnel_test \
+		"Decap error: Key exists but was not expected" $sip "2" \
+		"00:00:00:E9:"
+
+	# Destroy the tunnel and create new one with key
+	__addr_add_del g1 del 2001:db8:3::1/128
+	tunnel_destroy g1
+
+	tunnel_create g1 ip6gre 2001:db8:3::1 2001:db8:3::2 tos inherit \
+		ttl inherit key 233
+	__addr_add_del g1 add 2001:db8:3::1/128
+
+	no_matching_tunnel_test \
+		"Decap error: Key does not exist but was expected" $sip "0"
+	no_matching_tunnel_test \
+		"Decap error: Packet has a wrong key field" $sip "2" \
+		"00:00:00:E8:"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh
new file mode 100644
index 000000000..f7c168dec
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/mirror_gre_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../mirror_gre_scale.sh
+
+mirror_gre_get_target()
+{
+	local should_fail=$1; shift
+	local target
+
+	target=$(devlink_resource_size_get span_agents)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh
new file mode 100644
index 000000000..0b71dfbbb
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/port_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../port_scale.sh
+
+port_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get physical_ports)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
new file mode 100755
index 000000000..688338bbe
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
@@ -0,0 +1,79 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+NUM_NETIFS=6
+source $lib_dir/lib.sh
+source $lib_dir/tc_common.sh
+source $lib_dir/devlink_lib.sh
+source ../mlxsw_lib.sh
+
+mlxsw_only_on_spectrum 2+ || exit 1
+
+current_test=""
+
+cleanup()
+{
+	pre_cleanup
+	if [ ! -z $current_test ]; then
+		${current_test}_cleanup
+	fi
+	# Need to reload in order to avoid router abort.
+	devlink_reload
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+	router
+	tc_flower
+	mirror_gre
+	tc_police
+	port
+	rif_mac_profile
+	rif_counter
+"
+
+for current_test in ${TESTS:-$ALL_TESTS}; do
+	RET_FIN=0
+	source ${current_test}_scale.sh
+
+	num_netifs_var=${current_test^^}_NUM_NETIFS
+	num_netifs=${!num_netifs_var:-$NUM_NETIFS}
+
+	for should_fail in 0 1; do
+		RET=0
+		target=$(${current_test}_get_target "$should_fail")
+		if ((target == 0)); then
+			log_test_skip "'$current_test' should_fail=$should_fail test"
+			continue
+		fi
+
+		${current_test}_setup_prepare
+		setup_wait $num_netifs
+		# Update target in case occupancy of a certain resource changed
+		# following the test setup.
+		target=$(${current_test}_get_target "$should_fail")
+		${current_test}_test "$target" "$should_fail"
+		if [[ "$should_fail" -eq 0 ]]; then
+			log_test "'$current_test' $target"
+
+			if ((!RET)); then
+				tt=${current_test}_traffic_test
+				if [[ $(type -t $tt) == "function" ]]; then
+					$tt "$target"
+					log_test "'$current_test' $target traffic test"
+				fi
+			fi
+		else
+			log_test "'$current_test' overflow $target"
+		fi
+		${current_test}_cleanup $target
+		devlink_reload
+		RET_FIN=$(( RET_FIN || RET ))
+	done
+done
+current_test=""
+
+exit "$RET_FIN"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh
new file mode 120000
index 000000000..1f5752e8f
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_counter_scale.sh
@@ -0,0 +1 @@
+../spectrum/rif_counter_scale.sh
\ No newline at end of file
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh
new file mode 100644
index 000000000..303d7cbe3
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../rif_mac_profile_scale.sh
+
+rif_mac_profile_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get rif_mac_profiles)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh
new file mode 100644
index 000000000..1897e163e
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/router_scale.sh
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../router_scale.sh
+
+router_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get kvd)
+
+	if [[ $should_fail -eq 0 ]]; then
+		target=$((target * 85 / 100))
+	else
+		target=$((target + 1))
+	fi
+
+	echo $target
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
new file mode 100755
index 000000000..7bf56ea16
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
@@ -0,0 +1,1075 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2.
+# It tries to exercise as many code paths in the eRP state machine as
+# possible.
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+ALL_TESTS="single_mask_test identical_filters_test two_masks_test \
+	multiple_masks_test ctcam_edge_cases_test delta_simple_test \
+	delta_two_masks_one_key_test delta_simple_rehash_test \
+	bloom_simple_test bloom_complex_test bloom_delta_test \
+	max_erp_entries_test"
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+source $lib_dir/tc_common.sh
+source $lib_dir/devlink_lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 198.51.100.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24
+}
+
+tp_record()
+{
+	local tracepoint=$1
+	local cmd=$2
+
+	perf record -q -e $tracepoint $cmd
+	return $?
+}
+
+tp_record_all()
+{
+	local tracepoint=$1
+	local seconds=$2
+
+	perf record -a -q -e $tracepoint sleep $seconds
+	return $?
+}
+
+__tp_hit_count()
+{
+	local tracepoint=$1
+
+	local perf_output=`perf script -F trace:event,trace`
+	return `echo $perf_output | grep "$tracepoint:" | wc -l`
+}
+
+tp_check_hits()
+{
+	local tracepoint=$1
+	local count=$2
+
+	__tp_hit_count $tracepoint
+	if [[ "$?" -ne "$count" ]]; then
+		return 1
+	fi
+	return 0
+}
+
+tp_check_hits_any()
+{
+	local tracepoint=$1
+
+	__tp_hit_count $tracepoint
+	if [[ "$?" -eq "0" ]]; then
+		return 1
+	fi
+	return 0
+}
+
+single_mask_test()
+{
+	# When only a single mask is required, the device uses the master
+	# mask and not the eRP table. Verify that under this mode the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 2
+	check_err $? "Two filters - did not match highest priority"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match lowest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Single filter - did not match after delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "single mask test ($tcflags)"
+}
+
+identical_filters_test()
+{
+	# When two filters that only differ in their priority are used,
+	# one needs to be inserted into the C-TCAM. This test verifies
+	# that filters are correctly spilled to C-TCAM and that the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match C-TCAM filter after A-TCAM delete"
+
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match C-TCAM filter after A-TCAM add"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter after C-TCAM delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "identical filters test ($tcflags)"
+}
+
+two_masks_test()
+{
+	# When more than one mask is required, the eRP table is used. This
+	# test verifies that the eRP table is correctly allocated and used
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/8 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Two filters - did not match highest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match highest priority after add"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "two masks test ($tcflags)"
+}
+
+multiple_masks_test()
+{
+	# The number of masks in a region is limited. Once the maximum
+	# number of masks has been reached filters that require new
+	# masks are spilled to the C-TCAM. This test verifies that
+	# spillage is performed correctly and that the right filter is
+	# matched
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	local index
+
+	RET=0
+
+	NUM_MASKS=32
+	NUM_ERPS=16
+	BASE_INDEX=100
+
+	for i in $(eval echo {1..$NUM_MASKS}); do
+		index=$((BASE_INDEX - i))
+
+		if ((i > NUM_ERPS)); then
+			exp_hits=1
+			err_msg="$i filters - C-TCAM spill did not happen when it was expected"
+		else
+			exp_hits=0
+			err_msg="$i filters - C-TCAM spill happened when it should not"
+		fi
+
+		tp_record "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \
+			"tc filter add dev $h2 ingress protocol ip pref $index \
+				handle $index \
+				flower $tcflags \
+				dst_ip 192.0.2.2/${i} src_ip 192.0.2.1/${i} \
+				action drop"
+		tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" \
+				$exp_hits
+		check_err $? "$err_msg"
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 1
+		check_err $? "$i filters - did not match highest priority (add)"
+	done
+
+	for i in $(eval echo {$NUM_MASKS..1}); do
+		index=$((BASE_INDEX - i))
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 2
+		check_err $? "$i filters - did not match highest priority (del)"
+
+		tc filter del dev $h2 ingress protocol ip pref $index \
+			handle $index flower
+	done
+
+	log_test "multiple masks test ($tcflags)"
+}
+
+ctcam_two_atcam_masks_test()
+{
+	RET=0
+
+	# First case: C-TCAM is disabled when there are two A-TCAM masks.
+	# We push a filter into the C-TCAM by using two identical filters
+	# as in identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/16 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	# Delete both A-TCAM and C-TCAM filters and make sure the remaining
+	# A-TCAM filter still works
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "ctcam with two atcam masks test ($tcflags)"
+}
+
+ctcam_one_atcam_mask_test()
+{
+	RET=0
+
+	# Second case: C-TCAM is disabled when there is one A-TCAM mask.
+	# The test is similar to identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match C-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with one atcam mask test ($tcflags)"
+}
+
+ctcam_no_atcam_masks_test()
+{
+	RET=0
+
+	# Third case: C-TCAM is disabled when there are no A-TCAM masks
+	# This test exercises the code path that transitions the eRP table
+	# to its initial state after deleting the last C-TCAM mask
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with no atcam masks test ($tcflags)"
+}
+
+ctcam_edge_cases_test()
+{
+	# When the C-TCAM is disabled after deleting the last C-TCAM
+	# mask, we want to make sure the eRP state machine is put in
+	# the correct state
+
+	ctcam_two_atcam_masks_test
+	ctcam_one_atcam_mask_test
+	ctcam_no_atcam_masks_test
+}
+
+delta_simple_test()
+{
+	# The first filter will create eRP, the second filter will fit into
+	# the first eRP with delta. Remove the first rule then and check that
+        # the eRP stays (referenced by the second filter).
+
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 1 handle 101 flower $tcflags dst_ip 192.0.0.0/24 \
+		   action drop"
+	tp_check_hits "objagg:objagg_obj_root_create" 1
+	check_err $? "eRP was not created"
+
+	tp_record "objagg:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \
+		   action drop"
+	tp_check_hits "objagg:objagg_obj_root_create" 0
+	check_err $? "eRP was incorrectly created"
+	tp_check_hits "objagg:objagg_obj_parent_assign" 1
+	check_err $? "delta was not created"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \
+		   pref 1 handle 101 flower"
+	tp_check_hits "objagg:objagg_obj_root_destroy" 0
+	check_err $? "eRP was incorrectly destroyed"
+	tp_check_hits "objagg:objagg_obj_parent_unassign" 0
+	check_err $? "delta was incorrectly destroyed"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after the first was removed"
+
+	tp_record "objagg:*" "tc filter del dev $h2 ingress protocol ip \
+		   pref 2 handle 102 flower"
+	tp_check_hits "objagg:objagg_obj_parent_unassign" 1
+	check_err $? "delta was not destroyed"
+	tp_check_hits "objagg:objagg_obj_root_destroy" 1
+	check_err $? "eRP was not destroyed"
+
+	log_test "delta simple test ($tcflags)"
+}
+
+delta_two_masks_one_key_test()
+{
+	# If 2 keys are the same and only differ in mask in a way that
+	# they belong under the same ERP (second is delta of the first),
+	# there should be no C-TCAM spill.
+
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 1 handle 101 flower $tcflags dst_ip 192.0.2.0/24 \
+		   action drop"
+	tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0
+	check_err $? "incorrect C-TCAM spill while inserting the first rule"
+
+	tp_record "mlxsw:*" "tc filter add dev $h2 ingress protocol ip \
+		   pref 2 handle 102 flower $tcflags dst_ip 192.0.2.2 \
+		   action drop"
+	tp_check_hits "mlxsw:mlxsw_sp_acl_atcam_entry_add_ctcam_spill" 0
+	check_err $? "incorrect C-TCAM spill while inserting the second rule"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "delta two masks one key test ($tcflags)"
+}
+
+delta_simple_rehash_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_fail $? "Rehash trace was hit even when rehash should be disabled"
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 3000
+	check_err $? "Failed to set ACL region rehash interval"
+
+	sleep 1
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.1.0/25 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.3.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_err $? "Migrate trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_err $? "Migrate end trace was not hit"
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_fail $? "Migrate trace was hit when no migration should happen"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_fail $? "Migrate end trace was hit when no migration should happen"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after rehash"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	log_test "delta simple rehash test ($tcflags)"
+}
+
+delta_simple_ipv6_rehash_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_fail $? "Rehash trace was hit even when rehash should be disabled"
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 3000
+	check_err $? "Failed to set ACL region rehash interval"
+
+	sleep 1
+
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \
+		$tcflags dst_ip 2001:db8:1::0/121 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \
+		$tcflags dst_ip 2001:db8:2::2 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \
+		$tcflags dst_ip 2001:db8:3::0/120 action drop
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_err $? "Migrate trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_err $? "Migrate end trace was not hit"
+	tp_record_all mlxsw:* 3
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_err $? "Rehash trace was not hit"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate
+	check_fail $? "Migrate trace was hit when no migration should happen"
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_migrate_end
+	check_fail $? "Migrate end trace was hit when no migration should happen"
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after rehash"
+
+	tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower
+
+	log_test "delta simple IPv6 rehash test ($tcflags)"
+}
+
+TEST_RULE_BASE=256
+declare -a test_rules_inserted
+
+test_rule_add()
+{
+	local iface=$1
+	local tcflags=$2
+	local index=$3
+
+	if ! [ ${test_rules_inserted[$index]} ] ; then
+		test_rules_inserted[$index]=false
+	fi
+	if ${test_rules_inserted[$index]} ; then
+		return
+	fi
+
+	local number=$(( $index + $TEST_RULE_BASE ))
+	printf -v hexnumber '%x' $number
+
+	batch="${batch}filter add dev $iface ingress protocol ipv6 pref 1 \
+		handle $number flower $tcflags \
+		src_ip 2001:db8:1::$hexnumber action drop\n"
+	test_rules_inserted[$index]=true
+}
+
+test_rule_del()
+{
+	local iface=$1
+	local index=$2
+
+	if ! [ ${test_rules_inserted[$index]} ] ; then
+		test_rules_inserted[$index]=false
+	fi
+	if ! ${test_rules_inserted[$index]} ; then
+		return
+	fi
+
+	local number=$(( $index + $TEST_RULE_BASE ))
+	printf -v hexnumber '%x' $number
+
+	batch="${batch}filter del dev $iface ingress protocol ipv6 pref 1 \
+		handle $number flower\n"
+	test_rules_inserted[$index]=false
+}
+
+test_rule_add_or_remove()
+{
+	local iface=$1
+	local tcflags=$2
+	local index=$3
+
+	if ! [ ${test_rules_inserted[$index]} ] ; then
+		test_rules_inserted[$index]=false
+	fi
+	if ${test_rules_inserted[$index]} ; then
+		test_rule_del $iface $index
+	else
+		test_rule_add $iface $tcflags $index
+	fi
+}
+
+test_rule_add_or_remove_random_batch()
+{
+	local iface=$1
+	local tcflags=$2
+	local total_count=$3
+	local skip=0
+	local count=0
+	local MAXSKIP=20
+	local MAXCOUNT=20
+
+	for ((i=1;i<=total_count;i++)); do
+		if (( $skip == 0 )) && (($count == 0)); then
+			((skip=$RANDOM % $MAXSKIP + 1))
+			((count=$RANDOM % $MAXCOUNT + 1))
+		fi
+		if (( $skip != 0 )); then
+			((skip-=1))
+		else
+			((count-=1))
+			test_rule_add_or_remove $iface $tcflags $i
+		fi
+	done
+}
+
+delta_massive_ipv6_rehash_test()
+{
+	RET=0
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	tp_record_all mlxsw:mlxsw_sp_acl_tcam_vregion_rehash 7
+	tp_check_hits_any mlxsw:mlxsw_sp_acl_tcam_vregion_rehash
+	check_fail $? "Rehash trace was hit even when rehash should be disabled"
+
+	RANDOM=4432897
+	declare batch=""
+	test_rule_add_or_remove_random_batch $h2 $tcflags 5000
+
+	echo -n -e $batch | tc -b -
+
+	declare batch=""
+	test_rule_add_or_remove_random_batch $h2 $tcflags 5000
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 3000
+	check_err $? "Failed to set ACL region rehash interval"
+
+	sleep 1
+
+	tc filter add dev $h2 ingress protocol ipv6 pref 1 handle 101 flower \
+		$tcflags dst_ip 2001:db8:1::0/121 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 2 handle 102 flower \
+		$tcflags dst_ip 2001:db8:2::2 action drop
+	tc filter add dev $h2 ingress protocol ipv6 pref 3 handle 103 flower \
+		$tcflags dst_ip 2001:db8:3::0/120 action drop
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter"
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match on correct filter"
+
+	echo -n -e $batch | tc -b -
+
+	devlink dev param set $DEVLINK_DEV \
+		name acl_region_rehash_interval cmode runtime value 0
+	check_err $? "Failed to set ACL region rehash interval"
+
+	$MZ $h1 -6 -c 1 -p 64 -a $h1mac -b $h2mac \
+		-A 2001:db8:2::1 -B 2001:db8:2::2 -t udp -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_fail $? "Matched a wrong filter after rehash"
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match on correct filter after rehash"
+
+	tc filter del dev $h2 ingress protocol ipv6 pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ipv6 pref 1 handle 101 flower
+
+	declare batch=""
+	for i in {1..5000}; do
+		test_rule_del $h2 $tcflags $i
+	done
+	echo -e $batch | tc -b -
+
+	log_test "delta massive IPv6 rehash test ($tcflags)"
+}
+
+bloom_simple_test()
+{
+	# Bloom filter requires that the eRP table is used. This test
+	# verifies that Bloom filter is not harming correctness of ACLs.
+	# First, make sure that eRP table is used and then set rule patterns
+	# which are distant enough and will result skipping a lookup after
+	# consulting the Bloom filter. Although some eRP lookups are skipped,
+	# the correct filter should be hit.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 5 handle 104 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/8 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Two filters - did not match highest priority"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 104 1
+	check_err $? "Single filter - did not match"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Low prio filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 198.0.0.0/8 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match highest priority after add"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 5 handle 104 flower
+
+	log_test "bloom simple test ($tcflags)"
+}
+
+bloom_complex_test()
+{
+	# Bloom filter index computation is affected from region ID, eRP
+	# ID and from the region key size. In order to excercise those parts
+	# of the Bloom filter code, use a series of regions, each with a
+	# different key size and send packet that should hit all of them.
+	local index
+
+	RET=0
+	NUM_CHAINS=4
+	BASE_INDEX=100
+
+	# Create chain with up to 2 key blocks (ip_proto only)
+	tc chain add dev $h2 ingress chain 1 protocol ip flower \
+		ip_proto tcp &> /dev/null
+	# Create chain with 2-4 key blocks (ip_proto, src MAC)
+	tc chain add dev $h2 ingress chain 2 protocol ip flower \
+		ip_proto tcp \
+		src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+	# Create chain with 4-8 key blocks (ip_proto, src & dst MAC, IPv4 dest)
+	tc chain add dev $h2 ingress chain 3 protocol ip flower \
+		ip_proto tcp \
+		dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \
+		src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF \
+		dst_ip 0.0.0.0/32 &> /dev/null
+	# Default chain contains all fields and therefore is 8-12 key blocks
+	tc chain add dev $h2 ingress chain 4
+
+	# We need at least 2 rules in every region to have eRP table active
+	# so create a dummy rule per chain using a different pattern
+	for i in $(eval echo {0..$NUM_CHAINS}); do
+		index=$((BASE_INDEX - 1 - i))
+		tc filter add dev $h2 ingress chain $i protocol ip \
+			pref 2 handle $index flower \
+			$tcflags ip_proto tcp action drop
+	done
+
+	# Add rules to test Bloom filter, each in a different chain
+	index=$BASE_INDEX
+	tc filter add dev $h2 ingress protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags dst_ip 192.0.0.0/16 action goto chain 1
+	tc filter add dev $h2 ingress chain 1 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags action goto chain 2
+	tc filter add dev $h2 ingress chain 2 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags src_mac $h1mac action goto chain 3
+	tc filter add dev $h2 ingress chain 3 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags dst_ip 192.0.0.0/8 action goto chain 4
+	tc filter add dev $h2 ingress chain 4 protocol ip \
+		pref 1 handle $((++index)) flower \
+		$tcflags src_ip 192.0.2.0/24 action drop
+
+	# Send a packet that is supposed to hit all chains
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	for i in $(eval echo {0..$NUM_CHAINS}); do
+		index=$((BASE_INDEX + i + 1))
+		tc_check_packets "dev $h2 ingress" $index 1
+		check_err $? "Did not match chain $i"
+	done
+
+	# Rules cleanup
+	for i in $(eval echo {$NUM_CHAINS..0}); do
+		index=$((BASE_INDEX - i - 1))
+		tc filter del dev $h2 ingress chain $i \
+			pref 2 handle $index flower
+		index=$((BASE_INDEX + i + 1))
+		tc filter del dev $h2 ingress chain $i \
+			pref 1 handle $index flower
+	done
+
+	# Chains cleanup
+	for i in $(eval echo {$NUM_CHAINS..1}); do
+		tc chain del dev $h2 ingress chain $i
+	done
+
+	log_test "bloom complex test ($tcflags)"
+}
+
+
+bloom_delta_test()
+{
+	# When multiple masks are used, the eRP table is activated. When
+	# masks are close enough (delta) the masks reside on the same
+	# eRP table. This test verifies that the eRP table is correctly
+	# allocated and used in delta condition and that Bloom filter is
+	# still functional with delta.
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.1.0.0/16 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.1.2.1 -B 192.1.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.2.1.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.2.1.1 -B 192.2.1.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Delta filters - did not match second filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "bloom delta test ($tcflags)"
+}
+
+max_erp_entries_test()
+{
+	# The number of eRP entries is limited. Once the maximum number of eRPs
+	# has been reached, filters cannot be added. This test verifies that
+	# when this limit is reached, inserstion fails without crashing.
+
+	RET=0
+
+	local num_masks=32
+	local num_regions=15
+	local chain_failed
+	local mask_failed
+	local ret
+
+	if [[ "$tcflags" != "skip_sw" ]]; then
+		return 0;
+	fi
+
+	for ((i=1; i < $num_regions; i++)); do
+		for ((j=$num_masks; j >= 0; j--)); do
+			tc filter add dev $h2 ingress chain $i protocol ip \
+				pref $i	handle $j flower $tcflags \
+				dst_ip 192.1.0.0/$j &> /dev/null
+			ret=$?
+
+			if [ $ret -ne 0 ]; then
+				chain_failed=$i
+				mask_failed=$j
+				break 2
+			fi
+		done
+	done
+
+	# We expect to exceed the maximum number of eRP entries, so that
+	# insertion eventually fails. Otherwise, the test should be adjusted to
+	# add more filters.
+	check_fail $ret "expected to exceed number of eRP entries"
+
+	for ((; i >= 1; i--)); do
+		for ((j=0; j <= $num_masks; j++)); do
+			tc filter del dev $h2 ingress chain $i protocol ip \
+				pref $i handle $j flower &> /dev/null
+		done
+	done
+
+	log_test "max eRP entries test ($tcflags). " \
+		"max chain $chain_failed, mask $mask_failed"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+if ! tc_offload_check; then
+	check_err 1 "Could not test offloaded functionality"
+	log_test "mlxsw-specific tests for tc flower"
+	exit
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh
new file mode 100644
index 000000000..4444bbace
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower_scale.sh
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_flower_scale.sh
+
+tc_flower_get_target()
+{
+	local should_fail=$1; shift
+	local max_cnts
+
+	# The driver associates a counter with each tc filter, which means the
+	# number of supported filters is bounded by the number of available
+	# counters.
+	max_cnts=$(devlink_resource_size_get counters flow)
+
+	# Remove already allocated counters.
+	((max_cnts -= $(devlink_resource_occ_get counters flow)))
+
+	# Each rule uses two counters, for packets and bytes.
+	((max_cnts /= 2))
+
+	if ((! should_fail)); then
+		echo $max_cnts
+	else
+		echo $((max_cnts + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh
new file mode 100644
index 000000000..e79ac0dad
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_police_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_police_scale.sh
+
+tc_police_get_target()
+{
+	local should_fail=$1; shift
+	local target
+
+	target=$(devlink_resource_size_get global_policers single_rate_policers)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh
new file mode 100755
index 000000000..fd23c80eb
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh
@@ -0,0 +1,339 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test VxLAN flooding. The device stores flood records in a singly linked list
+# where each record stores up to four IPv6 addresses of remote VTEPs. The test
+# verifies that packets are correctly flooded in various cases such as deletion
+# of a record in the middle of the list.
+#
+# +-----------------------+
+# | H1 (vrf)              |
+# |    + $h1              |
+# |    | 2001:db8:1::1/64 |
+# +----|------------------+
+#      |
+# +----|----------------------------------------------------------------------+
+# | SW |                                                                      |
+# | +--|--------------------------------------------------------------------+ |
+# | |  + $swp1                   BR0 (802.1d)                               | |
+# | |                                                                       | |
+# | |  + vxlan0 (vxlan)                                                     | |
+# | |    local 2001:db8:2::1                                                | |
+# | |    remote 2001:db8:2::{2..17}                                         | |
+# | |    id 10 dstport 4789                                                 | |
+# | +-----------------------------------------------------------------------+ |
+# |                                                                           |
+# |  2001:db8:2::0/64 via 2001:db8:3::2                                       |
+# |                                                                           |
+# |    + $rp1                                                                 |
+# |    | 2001:db8:3::1/64                                                     |
+# +----|----------------------------------------------------------------------+
+#      |
+# +----|--------------------------------------------------------+
+# |    |                                               R2 (vrf) |
+# |    + $rp2                                                   |
+# |      2001:db8:3::2/64                                       |
+# |                                                             |
+# +-------------------------------------------------------------+
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+ALL_TESTS="flooding_test"
+NUM_NETIFS=4
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 2001:db8:1::1/64
+}
+
+switch_create()
+{
+	# Make sure the bridge uses the MAC address of the local port and
+	# not that of the VxLAN's device
+	ip link add dev br0 type bridge mcast_snooping 0
+	ip link set dev br0 address $(mac_get $swp1)
+
+	ip link add name vxlan0 type vxlan id 10 nolearning \
+		udp6zerocsumrx udp6zerocsumtx ttl 20 tos inherit \
+		local 2001:db8:2::1 dstport 4789
+
+	ip address add 2001:db8:2::1/128 dev lo
+
+	ip link set dev $swp1 master br0
+	ip link set dev vxlan0 master br0
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev vxlan0 up
+}
+
+switch_destroy()
+{
+	ip link set dev vxlan0 down
+	ip link set dev $swp1 down
+	ip link set dev br0 down
+
+	ip link set dev vxlan0 nomaster
+	ip link set dev $swp1 nomaster
+
+	ip address del 2001:db8:2::1/128 dev lo
+
+	ip link del dev vxlan0
+
+	ip link del dev br0
+}
+
+router1_create()
+{
+	# This router is in the default VRF, where the VxLAN device is
+	# performing the L3 lookup
+	ip link set dev $rp1 up
+	ip address add 2001:db8:3::1/64 dev $rp1
+	ip route add 2001:db8:2::0/64 via 2001:db8:3::2
+}
+
+router1_destroy()
+{
+	ip route del 2001:db8:2::0/64 via 2001:db8:3::2
+	ip address del 2001:db8:3::1/64 dev $rp1
+	ip link set dev $rp1 down
+}
+
+router2_create()
+{
+	# This router is not in the default VRF, so use simple_if_init()
+	simple_if_init $rp2 2001:db8:3::2/64
+}
+
+router2_destroy()
+{
+	simple_if_fini $rp2 2001:db8:3::2/64
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	rp1=${NETIFS[p3]}
+	rp2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+
+	switch_create
+
+	router1_create
+	router2_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router2_destroy
+	router1_destroy
+
+	switch_destroy
+
+	h1_destroy
+
+	vrf_cleanup
+}
+
+flooding_remotes_add()
+{
+	local num_remotes=$1
+	local lsb
+	local i
+
+	# Prevent unwanted packets from entering the bridge and interfering
+	# with the test.
+	tc qdisc add dev br0 clsact
+	tc filter add dev br0 egress protocol all pref 1 handle 1 \
+		matchall skip_hw action drop
+	tc qdisc add dev $h1 clsact
+	tc filter add dev $h1 egress protocol all pref 1 handle 1 \
+		flower skip_hw dst_mac de:ad:be:ef:13:37 action pass
+	tc filter add dev $h1 egress protocol all pref 2 handle 2 \
+		matchall skip_hw action drop
+
+	for i in $(eval echo {1..$num_remotes}); do
+		lsb=$((i + 1))
+
+		bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \
+			dst 2001:db8:2::$lsb
+	done
+}
+
+flooding_filters_add()
+{
+	local num_remotes=$1
+	local lsb
+	local i
+
+	tc qdisc add dev $rp2 clsact
+
+	for i in $(eval echo {1..$num_remotes}); do
+		lsb=$((i + 1))
+
+		tc filter add dev $rp2 ingress protocol ipv6 pref $i handle $i \
+			flower ip_proto udp dst_ip 2001:db8:2::$lsb \
+			dst_port 4789 skip_sw action drop
+	done
+}
+
+flooding_filters_del()
+{
+	local num_remotes=$1
+	local i
+
+	for i in $(eval echo {1..$num_remotes}); do
+		tc filter del dev $rp2 ingress protocol ipv6 pref $i \
+			handle $i flower
+	done
+
+	tc qdisc del dev $rp2 clsact
+
+	tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall
+	tc filter del dev $h1 egress protocol all pref 1 handle 1 flower
+	tc qdisc del dev $h1 clsact
+	tc filter del dev br0 egress protocol all pref 1 handle 1 matchall
+	tc qdisc del dev br0 clsact
+}
+
+flooding_check_packets()
+{
+	local packets=("$@")
+	local num_remotes=${#packets[@]}
+	local i
+
+	for i in $(eval echo {1..$num_remotes}); do
+		tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]}
+		check_err $? "remote $i - did not get expected number of packets"
+	done
+}
+
+flooding_test()
+{
+	# Use 16 remote VTEPs that will be stored in 4 records. The array
+	# 'packets' will store how many packets are expected to be received
+	# by each remote VTEP at each stage of the test
+	declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1)
+	local num_remotes=16
+
+	RET=0
+
+	# Add FDB entries for remote VTEPs and corresponding tc filters on the
+	# ingress of the nexthop router. These filters will count how many
+	# packets were flooded to each remote VTEP
+	flooding_remotes_add $num_remotes
+	flooding_filters_add $num_remotes
+
+	# Send one packet and make sure it is flooded to all the remote VTEPs
+	$MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 1 packet"
+
+	# Delete the third record which corresponds to VTEPs with LSB 10..13
+	# and check that packet is flooded correctly when we remove a record
+	# from the middle of the list
+	RET=0
+
+	packets=(2 2 2 2 2 2 2 2 1 1 1 1 2 2 2 2)
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::10
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::11
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::12
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::13
+
+	$MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 2 packets"
+
+	# Delete the first record and make sure the packet is flooded correctly
+	RET=0
+
+	packets=(2 2 2 2 3 3 3 3 1 1 1 1 3 3 3 3)
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::2
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::3
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::4
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::5
+
+	$MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 3 packets"
+
+	# Delete the last record and make sure the packet is flooded correctly
+	RET=0
+
+	packets=(2 2 2 2 4 4 4 4 1 1 1 1 3 3 3 3)
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::14
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::15
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::16
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::17
+
+	$MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 4 packets"
+
+	# Delete the last record, one entry at a time and make sure single
+	# entries are correctly removed
+	RET=0
+
+	packets=(2 2 2 2 4 5 5 5 1 1 1 1 3 3 3 3)
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::6
+
+	$MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 5 packets"
+
+	RET=0
+
+	packets=(2 2 2 2 4 5 6 6 1 1 1 1 3 3 3 3)
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::7
+
+	$MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 6 packets"
+
+	RET=0
+
+	packets=(2 2 2 2 4 5 6 7 1 1 1 1 3 3 3 3)
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::8
+
+	$MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 7 packets"
+
+	RET=0
+
+	packets=(2 2 2 2 4 5 6 7 1 1 1 1 3 3 3 3)
+	bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 2001:db8:2::9
+
+	$MZ -6 $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1
+	flooding_check_packets "${packets[@]}"
+	log_test "flood after 8 packets"
+
+	flooding_filters_del $num_remotes
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS