summaryrefslogtreecommitdiffstats
path: root/Documentation/core-api/maple_tree.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/core-api/maple_tree.rst')
-rw-r--r--Documentation/core-api/maple_tree.rst217
1 files changed, 217 insertions, 0 deletions
diff --git a/Documentation/core-api/maple_tree.rst b/Documentation/core-api/maple_tree.rst
new file mode 100644
index 000000000..45defcf15
--- /dev/null
+++ b/Documentation/core-api/maple_tree.rst
@@ -0,0 +1,217 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+
+==========
+Maple Tree
+==========
+
+:Author: Liam R. Howlett
+
+Overview
+========
+
+The Maple Tree is a B-Tree data type which is optimized for storing
+non-overlapping ranges, including ranges of size 1. The tree was designed to
+be simple to use and does not require a user written search method. It
+supports iterating over a range of entries and going to the previous or next
+entry in a cache-efficient manner. The tree can also be put into an RCU-safe
+mode of operation which allows reading and writing concurrently. Writers must
+synchronize on a lock, which can be the default spinlock, or the user can set
+the lock to an external lock of a different type.
+
+The Maple Tree maintains a small memory footprint and was designed to use
+modern processor cache efficiently. The majority of the users will be able to
+use the normal API. An :ref:`maple-tree-advanced-api` exists for more complex
+scenarios. The most important usage of the Maple Tree is the tracking of the
+virtual memory areas.
+
+The Maple Tree can store values between ``0`` and ``ULONG_MAX``. The Maple
+Tree reserves values with the bottom two bits set to '10' which are below 4096
+(ie 2, 6, 10 .. 4094) for internal use. If the entries may use reserved
+entries then the users can convert the entries using xa_mk_value() and convert
+them back by calling xa_to_value(). If the user needs to use a reserved
+value, then the user can convert the value when using the
+:ref:`maple-tree-advanced-api`, but are blocked by the normal API.
+
+The Maple Tree can also be configured to support searching for a gap of a given
+size (or larger).
+
+Pre-allocating of nodes is also supported using the
+:ref:`maple-tree-advanced-api`. This is useful for users who must guarantee a
+successful store operation within a given
+code segment when allocating cannot be done. Allocations of nodes are
+relatively small at around 256 bytes.
+
+.. _maple-tree-normal-api:
+
+Normal API
+==========
+
+Start by initialising a maple tree, either with DEFINE_MTREE() for statically
+allocated maple trees or mt_init() for dynamically allocated ones. A
+freshly-initialised maple tree contains a ``NULL`` pointer for the range ``0``
+- ``ULONG_MAX``. There are currently two types of maple trees supported: the
+allocation tree and the regular tree. The regular tree has a higher branching
+factor for internal nodes. The allocation tree has a lower branching factor
+but allows the user to search for a gap of a given size or larger from either
+``0`` upwards or ``ULONG_MAX`` down. An allocation tree can be used by
+passing in the ``MT_FLAGS_ALLOC_RANGE`` flag when initialising the tree.
+
+You can then set entries using mtree_store() or mtree_store_range().
+mtree_store() will overwrite any entry with the new entry and return 0 on
+success or an error code otherwise. mtree_store_range() works in the same way
+but takes a range. mtree_load() is used to retrieve the entry stored at a
+given index. You can use mtree_erase() to erase an entire range by only
+knowing one value within that range, or mtree_store() call with an entry of
+NULL may be used to partially erase a range or many ranges at once.
+
+If you want to only store a new entry to a range (or index) if that range is
+currently ``NULL``, you can use mtree_insert_range() or mtree_insert() which
+return -EEXIST if the range is not empty.
+
+You can search for an entry from an index upwards by using mt_find().
+
+You can walk each entry within a range by calling mt_for_each(). You must
+provide a temporary variable to store a cursor. If you want to walk each
+element of the tree then ``0`` and ``ULONG_MAX`` may be used as the range. If
+the caller is going to hold the lock for the duration of the walk then it is
+worth looking at the mas_for_each() API in the :ref:`maple-tree-advanced-api`
+section.
+
+Sometimes it is necessary to ensure the next call to store to a maple tree does
+not allocate memory, please see :ref:`maple-tree-advanced-api` for this use case.
+
+Finally, you can remove all entries from a maple tree by calling
+mtree_destroy(). If the maple tree entries are pointers, you may wish to free
+the entries first.
+
+Allocating Nodes
+----------------
+
+The allocations are handled by the internal tree code. See
+:ref:`maple-tree-advanced-alloc` for other options.
+
+Locking
+-------
+
+You do not have to worry about locking. See :ref:`maple-tree-advanced-locks`
+for other options.
+
+The Maple Tree uses RCU and an internal spinlock to synchronise access:
+
+Takes RCU read lock:
+ * mtree_load()
+ * mt_find()
+ * mt_for_each()
+ * mt_next()
+ * mt_prev()
+
+Takes ma_lock internally:
+ * mtree_store()
+ * mtree_store_range()
+ * mtree_insert()
+ * mtree_insert_range()
+ * mtree_erase()
+ * mtree_destroy()
+ * mt_set_in_rcu()
+ * mt_clear_in_rcu()
+
+If you want to take advantage of the internal lock to protect the data
+structures that you are storing in the Maple Tree, you can call mtree_lock()
+before calling mtree_load(), then take a reference count on the object you
+have found before calling mtree_unlock(). This will prevent stores from
+removing the object from the tree between looking up the object and
+incrementing the refcount. You can also use RCU to avoid dereferencing
+freed memory, but an explanation of that is beyond the scope of this
+document.
+
+.. _maple-tree-advanced-api:
+
+Advanced API
+============
+
+The advanced API offers more flexibility and better performance at the
+cost of an interface which can be harder to use and has fewer safeguards.
+You must take care of your own locking while using the advanced API.
+You can use the ma_lock, RCU or an external lock for protection.
+You can mix advanced and normal operations on the same array, as long
+as the locking is compatible. The :ref:`maple-tree-normal-api` is implemented
+in terms of the advanced API.
+
+The advanced API is based around the ma_state, this is where the 'mas'
+prefix originates. The ma_state struct keeps track of tree operations to make
+life easier for both internal and external tree users.
+
+Initialising the maple tree is the same as in the :ref:`maple-tree-normal-api`.
+Please see above.
+
+The maple state keeps track of the range start and end in mas->index and
+mas->last, respectively.
+
+mas_walk() will walk the tree to the location of mas->index and set the
+mas->index and mas->last according to the range for the entry.
+
+You can set entries using mas_store(). mas_store() will overwrite any entry
+with the new entry and return the first existing entry that is overwritten.
+The range is passed in as members of the maple state: index and last.
+
+You can use mas_erase() to erase an entire range by setting index and
+last of the maple state to the desired range to erase. This will erase
+the first range that is found in that range, set the maple state index
+and last as the range that was erased and return the entry that existed
+at that location.
+
+You can walk each entry within a range by using mas_for_each(). If you want
+to walk each element of the tree then ``0`` and ``ULONG_MAX`` may be used as
+the range. If the lock needs to be periodically dropped, see the locking
+section mas_pause().
+
+Using a maple state allows mas_next() and mas_prev() to function as if the
+tree was a linked list. With such a high branching factor the amortized
+performance penalty is outweighed by cache optimization. mas_next() will
+return the next entry which occurs after the entry at index. mas_prev()
+will return the previous entry which occurs before the entry at index.
+
+mas_find() will find the first entry which exists at or above index on
+the first call, and the next entry from every subsequent calls.
+
+mas_find_rev() will find the fist entry which exists at or below the last on
+the first call, and the previous entry from every subsequent calls.
+
+If the user needs to yield the lock during an operation, then the maple state
+must be paused using mas_pause().
+
+There are a few extra interfaces provided when using an allocation tree.
+If you wish to search for a gap within a range, then mas_empty_area()
+or mas_empty_area_rev() can be used. mas_empty_area() searches for a gap
+starting at the lowest index given up to the maximum of the range.
+mas_empty_area_rev() searches for a gap starting at the highest index given
+and continues downward to the lower bound of the range.
+
+.. _maple-tree-advanced-alloc:
+
+Advanced Allocating Nodes
+-------------------------
+
+Allocations are usually handled internally to the tree, however if allocations
+need to occur before a write occurs then calling mas_expected_entries() will
+allocate the worst-case number of needed nodes to insert the provided number of
+ranges. This also causes the tree to enter mass insertion mode. Once
+insertions are complete calling mas_destroy() on the maple state will free the
+unused allocations.
+
+.. _maple-tree-advanced-locks:
+
+Advanced Locking
+----------------
+
+The maple tree uses a spinlock by default, but external locks can be used for
+tree updates as well. To use an external lock, the tree must be initialized
+with the ``MT_FLAGS_LOCK_EXTERN flag``, this is usually done with the
+MTREE_INIT_EXT() #define, which takes an external lock as an argument.
+
+Functions and structures
+========================
+
+.. kernel-doc:: include/linux/maple_tree.h
+.. kernel-doc:: lib/maple_tree.c