summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am3517.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/am3517.dtsi')
-rw-r--r--arch/arm/boot/dts/am3517.dtsi194
1 files changed, 194 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
new file mode 100644
index 000000000..cb316135b
--- /dev/null
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "omap3.dtsi"
+
+/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */
+/delete-node/ &aes1_target;
+/delete-node/ &aes2_target;
+
+/ {
+ aliases {
+ serial3 = &uart4;
+ can = &hecc;
+ };
+
+ cpus {
+ cpu: cpu@0 {
+ /* Based on OMAP3630 variants OPP50 and OPP100 */
+ operating-points-v2 = <&cpu0_opp_table>;
+
+ clock-latency = <300000>; /* From legacy driver */
+ };
+ };
+
+ cpu0_opp_table: opp-table {
+ compatible = "operating-points-v2-ti-cpu";
+ syscon = <&scm_conf>;
+ /*
+ * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx
+ * appear to operate at 300MHz as well. Since AM3517 only
+ * lists one operating voltage, it will remain fixed at 1.2V
+ */
+ opp50-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1200000>;
+ opp-supported-hw = <0xffffffff 0xffffffff>;
+ opp-suspend;
+ };
+
+ opp100-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000>;
+ opp-supported-hw = <0xffffffff 0xffffffff>;
+ };
+ };
+
+ ocp@68000000 {
+ am35x_otg_hs: am35x_otg_hs@5c040000 {
+ compatible = "ti,omap3-musb";
+ ti,hwmods = "am35x_otg_hs";
+ status = "disabled";
+ reg = <0x5c040000 0x1000>;
+ interrupts = <71>;
+ interrupt-names = "mc";
+ };
+
+ davinci_emac: ethernet@5c000000 {
+ compatible = "ti,am3517-emac";
+ ti,hwmods = "davinci_emac";
+ status = "disabled";
+ reg = <0x5c000000 0x30000>;
+ interrupts = <67 68 69 70>;
+ syscon = <&scm_conf>;
+ ti,davinci-ctrl-reg-offset = <0x10000>;
+ ti,davinci-ctrl-mod-reg-offset = <0>;
+ ti,davinci-ctrl-ram-offset = <0x20000>;
+ ti,davinci-ctrl-ram-size = <0x2000>;
+ ti,davinci-rmii-en = /bits/ 8 <1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ clocks = <&emac_ick>;
+ clock-names = "ick";
+ };
+
+ davinci_mdio: mdio@5c030000 {
+ compatible = "ti,davinci_mdio";
+ ti,hwmods = "davinci_mdio";
+ status = "disabled";
+ reg = <0x5c030000 0x1000>;
+ bus_freq = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&emac_fck>;
+ clock-names = "fck";
+ };
+
+ uart4: serial@4809e000 {
+ compatible = "ti,omap3-uart";
+ ti,hwmods = "uart4";
+ status = "disabled";
+ reg = <0x4809e000 0x400>;
+ interrupts = <84>;
+ dmas = <&sdma 55 &sdma 54>;
+ dma-names = "tx", "rx";
+ clock-frequency = <48000000>;
+ };
+
+ omap3_pmx_core2: pinmux@480025d8 {
+ compatible = "ti,omap3-padconf", "pinctrl-single";
+ reg = <0x480025d8 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xff1f>;
+ };
+
+ hecc: can@5c050000 {
+ compatible = "ti,am3517-hecc";
+ status = "disabled";
+ reg = <0x5c050000 0x80>,
+ <0x5c053000 0x180>,
+ <0x5c052000 0x200>;
+ reg-names = "hecc", "hecc-ram", "mbx";
+ interrupts = <24>;
+ clocks = <&hecc_ck>;
+ };
+
+ /*
+ * On am3517 the OCP registers do not seem to be accessible
+ * similar to the omap34xx. Maybe SGX is permanently set to
+ * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+ * write-only at 0x50000e10. We detect SGX based on the SGX
+ * revision register instead of the unreadable OCP revision
+ * register.
+ */
+ sgx_module: target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000014 0x4>;
+ reg-names = "rev";
+ clocks = <&sgx_fck>, <&sgx_ick>;
+ clock-names = "fck", "ick";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x4000>;
+
+ /*
+ * Closed source PowerVR driver, no child device
+ * binding or driver in mainline
+ */
+ };
+ };
+};
+
+/* Not currently working, probably needs at least different clocks */
+&rng_target {
+ status = "disabled";
+ /delete-property/ clocks;
+};
+
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_hs {
+ status = "disabled";
+};
+
+&iva {
+ status = "disabled";
+};
+
+&mailbox {
+ status = "disabled";
+};
+
+&mmu_isp {
+ status = "disabled";
+};
+
+#include "am35xx-clocks.dtsi"
+#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt1_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};