summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/armada-388-gp.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/armada-388-gp.dts')
-rw-r--r--arch/arm/boot/dts/armada-388-gp.dts406
1 files changed, 406 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
new file mode 100644
index 000000000..e2ba50520
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 development board
+ * (RD-88F6820-GP)
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell Armada 388 DB-88F6820-GP";
+ compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2 GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+ internal-regs {
+ i2c@11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+ clock-frequency = <100000>;
+
+ expander0: pca9555@20 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pca0_pins>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x20>;
+ };
+
+ expander1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio0>;
+ interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x21>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ };
+ };
+
+ serial@12000 {
+ /*
+ * Exported on the micro USB connector CON16
+ * through an FTDI
+ */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+ };
+
+ /* GE1 CON15 */
+ ethernet@30000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
+ };
+
+ /* CON4 */
+ usb@58000 {
+ vcc-supply = <&reg_usb2_0_vbus>;
+ status = "okay";
+ };
+
+ /* GE0 CON1 */
+ ethernet@70000 {
+ pinctrl-names = "default";
+ /*
+ * The Reference Clock 0 is used to provide a
+ * clock to the PHY
+ */
+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
+ };
+
+
+ mdio@72004 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ sata@a8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata0_pins>, <&sata1_pins>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ target-supply = <&reg_5v_sata0>;
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ target-supply = <&reg_5v_sata1>;
+ };
+ };
+
+ bm@c8000 {
+ status = "okay";
+ };
+
+ sata@e0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata2: sata-port@0 {
+ reg = <0>;
+ target-supply = <&reg_5v_sata2>;
+ };
+
+ sata3: sata-port@1 {
+ reg = <1>;
+ target-supply = <&reg_5v_sata3>;
+ };
+ };
+
+ sdhci@d8000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhci_pins>;
+ no-1-8-v;
+ /*
+ * A388-GP board v1.5 and higher replace
+ * hitherto card detection method based on GPIO
+ * with the one using DAT3 pin. As they are
+ * incompatible, software-based polling is
+ * enabled with 'broken-cd' property. For boards
+ * older than v1.5 it can be replaced with:
+ * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+ * whereas for the newer ones following can be
+ * used instead:
+ * 'dat3-cd;'
+ * 'cd-inverted;'
+ */
+ broken-cd;
+ wp-inverted;
+ bus-width = <8>;
+ status = "okay";
+ };
+
+ /* CON5 */
+ usb3@f0000 {
+ usb-phy = <&usb2_1_phy>;
+ status = "okay";
+ };
+
+ /* CON7 */
+ usb3@f8000 {
+ usb-phy = <&usb3_phy>;
+ status = "okay";
+ };
+ };
+
+ bm-bppi {
+ status = "okay";
+ };
+
+ pcie {
+ status = "okay";
+ /*
+ * One PCIe units is accessible through
+ * standard PCIe slot on the board.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * The two other PCIe units are accessible
+ * through mini PCIe slot on the board.
+ */
+ pcie@2,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ pcie@3,0 {
+ /* Port 2, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ gpio-fan {
+ compatible = "gpio-fan";
+ gpios = <&expander1 3 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 3000 1>;
+ };
+ };
+
+ usb2_1_phy: usb2_1_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&reg_usb2_1_vbus>;
+ #phy-cells = <0>;
+ };
+
+ usb3_phy: usb3_phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&reg_usb3_vbus>;
+ #phy-cells = <0>;
+ };
+
+ reg_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usb2_0_vbus: v5-vbus0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-vbus0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_usb2_1_vbus: v5-vbus1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-vbus1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_sata0: pwr-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata0: v5-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_sata0>;
+ };
+
+ reg_12v_sata0: v12-sata0 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&reg_sata0>;
+ };
+
+ reg_sata1: pwr-sata1 {
+ regulator-name = "pwr_en_sata1";
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata1: v5-sata1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_sata1>;
+ };
+
+ reg_12v_sata1: v12-sata1 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata1";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&reg_sata1>;
+ };
+
+ reg_sata2: pwr-sata2 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata2";
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata2: v5-sata2 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_sata2>;
+ };
+
+ reg_12v_sata2: v12-sata2 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata2";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&reg_sata2>;
+ };
+
+ reg_sata3: pwr-sata3 {
+ compatible = "regulator-fixed";
+ regulator-name = "pwr_en_sata3";
+ enable-active-high;
+ regulator-boot-on;
+ gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ reg_5v_sata3: v5-sata3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v5.0-sata3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_sata3>;
+ };
+
+ reg_12v_sata3: v12-sata3 {
+ compatible = "regulator-fixed";
+ regulator-name = "v12.0-sata3";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&reg_sata3>;
+ };
+};
+
+&pinctrl {
+ pca0_pins: pca0_pins {
+ marvell,pins = "mpp18";
+ marvell,function = "gpio";
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p128", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ };
+};