summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/pxa300-raumfeld-common.dtsi')
-rw-r--r--arch/arm/boot/dts/pxa300-raumfeld-common.dtsi405
1 files changed, 405 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
new file mode 100644
index 000000000..147c99191
--- /dev/null
+++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "pxa3xx.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ /* Will be overridden by bootloader */
+ hw-revision = <0>;
+
+ chosen {
+ bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3";
+ stdout-path = &ffuart;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0xa0000000 0x8000000>; /* 128 MB */
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3-fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8-fixed-supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_va_5v0: regulator-va-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "va-5v0-fixed-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio 124 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ ssp_dai0: ssp-dai0 {
+ compatible = "mrvl,pxa-ssp-dai";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp0_dai_pins>;
+ port = <&ssp1>;
+ #sound-dai-cells = <0>;
+ dmas = <&pdma 13 3
+ &pdma 14 3>;
+ dma-names = "rx", "tx";
+ clock-names = "extclk";
+ };
+
+ ssp_dai1: ssp-dai1 {
+ compatible = "mrvl,pxa-ssp-dai";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssp1_dai_pins>;
+ port = <&ssp2>;
+ #sound-dai-cells = <0>;
+ dmas = <&pdma 15 3
+ &pdma 16 3>;
+ dma-names = "rx", "tx";
+ clock-names = "extclk";
+ };
+
+ spi: spi {
+ compatible = "spi-gpio";
+ #address-cells = <0x1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins>;
+ gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>;
+ gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>;
+ gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <
+ &gpio 34 GPIO_ACTIVE_HIGH
+ &gpio 125 GPIO_ACTIVE_HIGH
+ &gpio 96 GPIO_ACTIVE_HIGH
+ >;
+ num-chipselects = <3>;
+
+ dac: dac@2 {
+ compatible = "ti,dac7512";
+ reg = <2>;
+ spi-max-frequency = <1000000>;
+ vcc-supply = <&reg_3v3>;
+ };
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pins>;
+
+ on-off {
+ label = "on_off button";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_F6>;
+ };
+
+ rescue-boot {
+ label = "rescue boot button";
+ gpios = <&gpio 115 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_F4>;
+ };
+
+ setup {
+ label = "setup";
+ gpios = <&gpio 119 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_F3>;
+ };
+ };
+
+ rotary: rotary-encoder {
+ compatible = "rotary-encoder";
+ gpios = <
+ &gpio 19 GPIO_ACTIVE_LOW
+ &gpio 20 GPIO_ACTIVE_HIGH
+ >;
+ linux,axis = <REL_X>;
+ rotary-encoder,relative-axis;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a &led_pins_b>;
+
+ left {
+ label = "raumfeld:1";
+ gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+ };
+
+ right {
+ label = "raumfeld:2";
+ gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-names = "default";
+ pinctrl-0 = <&poweroff_pins>;
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+ };
+
+ mmc0_pwrseq: mmc-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pwrseq_pins>;
+ reset-gpios = <
+ &gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */
+ &gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */
+ >;
+ };
+
+ ethernet: ethernet@10000000 {
+ compatible = "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc_pins &smsc_bus_pins>;
+ reg = <0x10000000 0x100000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio>;
+ interrupts = <40 IRQ_TYPE_EDGE_FALLING>;
+ vdd33a-supply = <&reg_3v3>;
+ vddvario-supply = <&reg_1v8>;
+ reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
+ reg-io-width = <4>;
+ smsc,save-mac-address;
+ smsc,irq-push-pull;
+ };
+};
+
+&ffuart {
+ status = "okay";
+};
+
+&pwri2c {
+ status = "okay";
+
+ max8660: regulator@34 {
+ compatible = "maxim,max8660";
+ reg = <0x34>;
+
+ regulators {
+ regulator-v3 {
+ regulator-compatible = "V3(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-v4 {
+ regulator-compatible = "V4(DCDC)";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator-v5 {
+ regulator-compatible = "V5(LDO)";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ reg_vcc_sdio: regulator-v6 {
+ regulator-compatible = "V6(LDO)";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator-v7 {
+ regulator-compatible = "V7(LDO)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+&pxai2c1 {
+ status = "okay";
+ mrvl,i2c-fast-mode;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pxai2c1_pins>;
+};
+
+&ssp1 {
+ status = "okay";
+};
+
+&ssp2 {
+ status = "okay";
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ nand-rb = <0>;
+ nand-ecc-mode = "hw";
+ marvell,nand-keep-config;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0000000 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "BootloaderEnvironment";
+ reg = <0x0a0000 0x20000>;
+ };
+
+ partition@c0000 {
+ label = "BootloaderSplashScreen";
+ reg = <0x0c0000 0x60000>;
+ };
+
+ partition@120000 {
+ label = "UBI";
+ reg = <0x120000 0x7ee0000>;
+ };
+ };
+ };
+};
+
+&usb0 {
+ status = "okay";
+ marvell,enable-port1;
+ marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pxa3xx_ohci_pins>;
+};
+
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ pxa-mmc,detect-delay-ms = <200>;
+ vmmc-supply = <&reg_vcc_sdio>;
+ mmc-pwrseq = <&mmc0_pwrseq>;
+ non-removable;
+ bus-width = <4>;
+};
+
+&pinctrl {
+ poweroff_pins: poweroff-pins {
+ pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ led_pins_a: led-pins-a {
+ pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ led_pins_b: led-pins-b {
+ pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+ };
+
+ pxai2c1_pins: pxai2c1-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */
+ MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ };
+
+ gpio_keys_pins: gpio-keys-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(14) MFP_AF0 /* on-off */
+ MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */
+ MFP_PIN_PXA300(119) MFP_AF0 /* setup */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ spi_pins: spi-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(95) MFP_AF0 /* SCK */
+ MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */
+ MFP_PIN_PXA300(98) MFP_AF0 /* MISO */
+ MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */
+ MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */
+ MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ pxa3xx_ohci_pins: pxa3xx-ohci-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */
+ MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ smsc_pins: smsc-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(39) MFP_AF0 /* RESET */
+ MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ smsc_bus_pins: smsc-bus-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ mmc0_pins: mmc0-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */
+ MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */
+ MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */
+ MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */
+ MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */
+ MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH);
+ };
+
+ mmc0_pwrseq_pins: mmc0-pwrseq-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */
+ MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
+ };
+
+ ssp0_dai_pins: ssp0-dai-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */
+ MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */
+ MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */
+ MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */
+ MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */
+ MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+
+ ssp1_dai_pins: ssp1-dai-pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */
+ MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */
+ MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */
+ MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW);
+ };
+};