summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/r8a7742-iwg21d-q7.dts')
-rw-r--r--arch/arm/boot/dts/r8a7742-iwg21d-q7.dts445
1 files changed, 445 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
new file mode 100644
index 000000000..64102b664
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1H Qseven board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
+/dts-v1/;
+#include "r8a7742-iwg21m.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
+ compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
+
+ aliases {
+ serial2 = &scifa2;
+ serial4 = &scifb2;
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait";
+ stdout-path = "serial2:115200n8";
+ };
+
+ audio_clock: audio_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ };
+
+ lcd_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpu 2 5000000 0>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ pinctrl-0 = <&backlight_pins>;
+ pinctrl-names = "default";
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sdhi2_led {
+ label = "sdio-led";
+ gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ };
+ };
+
+ lvds-receiver {
+ compatible = "ti,ds90cf384a", "lvds-decoder";
+ power-supply = <&vcc_3v3_tft1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_receiver_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds_receiver_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+
+ panel {
+ compatible = "edt,etm0700g0dh6";
+ backlight = <&lcd_backlight>;
+ power-supply = <&vcc_3v3_tft1>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_receiver_out>;
+ };
+ };
+ };
+
+ reg_1p5v: 1p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+
+ rsnd_sgtl5000: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+
+ vcc_3v3_tft1: regulator-panel {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vcc-3v3-tft1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ startup-delay-us = <500>;
+ gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ vcc_sdhi2: regulator-vcc-sdhi2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+ };
+
+ vccq_sdhi2: regulator-vccq-sdhi2 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI2 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1>, <1800000 0>;
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&phy3>;
+ phy-mode = "gmii";
+ renesas,no-ether-link;
+ status = "okay";
+
+ phy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-id0022.1622",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ micrel,led-mode = <1>;
+ };
+};
+
+&i2c2 {
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ #sound-dai-cells = <0>;
+ reg = <0x0a>;
+ clocks = <&audio_clock>;
+ VDDA-supply = <&reg_3p3v>;
+ VDDIO-supply = <&reg_3p3v>;
+ VDDD-supply = <&reg_1p5v>;
+ };
+
+ touch: touchpanel@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+ /* GP1_29 is also shared with audio codec reset pin */
+ reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vcc_3v3_tft1>;
+ };
+};
+
+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&cmt0 {
+ status = "okay";
+};
+
+&du {
+ status = "okay";
+};
+
+&gpio0 {
+ touch-interrupt-hog {
+ gpio-hog;
+ gpios = <24 GPIO_ACTIVE_LOW>;
+ input;
+ };
+};
+
+&gpio1 {
+ can-trx-en-hog {
+ gpio-hog;
+ gpios = <28 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can-trx-en-gpio";
+ };
+};
+
+&hsusb {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&lvds0 {
+ status = "okay";
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&lvds_receiver_in>;
+ };
+ };
+ };
+};
+
+&msiof0 {
+ pinctrl-0 = <&msiof0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+
+ flash1: flash@0 {
+ compatible = "sst,sst25vf016b", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "user";
+ reg = <0x00000000 0x00200000>;
+ };
+ };
+ };
+};
+
+&pci0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ /* Disable hsusb to enable USB2.0 host mode support on J2 */
+ /* status = "okay"; */
+};
+
+&pci1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pci2 {
+ /* Disable xhci to enable USB2.0 host mode support on J23 bottom port */
+ /* status = "okay"; */
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pciec {
+ /* SW2[6] determines which connector is activated
+ * ON = PCIe X4 (connector-J7)
+ * OFF = mini-PCIe (connector-J26)
+ */
+ status = "okay";
+};
+
+&pfc {
+ avb_pins: avb {
+ groups = "avb_mdio", "avb_gmii";
+ function = "avb";
+ };
+
+ backlight_pins: backlight {
+ groups = "tpu0_to2";
+ function = "tpu0";
+ };
+
+ can1_pins: can1 {
+ groups = "can1_data_b";
+ function = "can1";
+ };
+
+ i2c2_pins: i2c2 {
+ groups = "i2c2_b";
+ function = "i2c2";
+ };
+
+ msiof0_pins: msiof0 {
+ groups = "msiof0_clk", "msiof0_sync", "msiof0_tx", "msiof0_rx";
+ function = "msiof0";
+ };
+
+ scifa2_pins: scifa2 {
+ groups = "scifa2_data_c";
+ function = "scifa2";
+ };
+
+ scifb2_pins: scifb2 {
+ groups = "scifb2_data", "scifb2_ctrl";
+ function = "scifb2";
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <3300>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "sdhi2_data4", "sdhi2_ctrl";
+ function = "sdhi2";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+ function = "ssi";
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ groups = "usb1_pwen";
+ function = "usb1";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi4>, <&src4>, <&dvc1>;
+ capture = <&ssi3>, <&src3>, <&dvc0>;
+ };
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scifa2 {
+ pinctrl-0 = <&scifa2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scifb2 {
+ pinctrl-0 = <&scifb2_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&sdhi2 {
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-1 = <&sdhi2_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&vcc_sdhi2>;
+ vqmmc-supply = <&vccq_sdhi2>;
+ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ sd-uhs-sdr50;
+ status = "okay";
+};
+
+&ssi4 {
+ shared-pin;
+};
+
+&tpu {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};